IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
The strncasecmp of buff against the literal string RSSI
is using variable length which is zero. This should be instead
using the variable size instead. Also remove the redundant
variable length.
Detected by PVS-Studio, warning: V575
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The vif->idx value is always 0 for two interfaces.
wl->vif_num = 0;
loop {
...
vif->idx = wl->vif_num;
...
wl->vif_num = i;
....
i++;
...
}
At present, vif->idx is assigned the value of wl->vif_num
at the beginning of this block and device is initialized
based on this index value.
In the next iteration, wl->vif_num is still 0 as it is only updated
later but gets assigned to vif->idx in the beginning. This causes problems
later when we try to reference a particular interface and also while
configuring the firmware.
This patch moves the assignment to vif->idx from the beginning
of the block to after wl->vif_num is updated with latest value of i.
Fixes: commit 735bb39ca3be ("staging: wilc1000: simplify vif[i]->ndev accesses")
Cc: <stable@vger.kernel.org>
Signed-off-by: Aditya Shankar <aditya.shankar@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The configuration packet format has changed in the newer wilc
firmware versions 14.2 and up. This update ensures that the
firmware is initialized correctly by the host and configured
in the required mode.
Signed-off-by: Aditya Shankar <aditya.shankar@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
ftrace can be used to trace functions. Removing function tracing using dev_dbg/info
Signed-off-by: Pushkar Jambhlekar <pushkar.iit@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
dev_err: replacing hardcoded function name with '%s' and __func__
Signed-off-by: Pushkar Jambhlekar <pushkar.iit@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
GAS_INTIAL_REQ should be GAS_INITIAL_REQ.
GAS_INTIAL_RSP should be GAS_INITIAL_RSP.
Improves readability of code.
Signed-off-by: Dylan Leggio <dleggio1@binghamton.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The pmkid data is meant be be copied to the previous item in the
pmkidlist, however the code is just copying the data to itself because
the src index into pmkidlist is the same as the dst index into pmkidlist.
Fix this with i + 1 instead of i.
Detected by CoverityScan,CID#13339465 ("Overlapping buffer in memory copy")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Correct misspelled variables: 'happended' to 'happened' to make the
code grammatically correct.
Signed-off-by: Tamara Diaconita <diaconita.tamara@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Move declaration of variables to top of function to make the code more
readable.
Signed-off-by: Tamara Diaconita <diaconita.tamara@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Variable ip_addr is already declared as pointer to u8. Again explicit type
casting of ip_addr to u8, is not required. Hence this patch removes it
by using the following coccinelle script.
@@
type T;
T *ptr,p;
@@
(
- (T *)(&p)
+ &p
|
- (T *)ptr
+ ptr
|
- (T *)(ptr)
+ ptr
|
- (T)(p)
+ p
)
Signed-off-by: Varsha Rao <rvarsha016@gmail.com>
Acked-by: Julia Lawall <julia.lawall@lip6.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Removing 6 continue statements from a while loop. The
continue statements are redundant here since control
already returns to the beginning of the loop upon exit
of any of the conditional blocks. Found using Coccinelle.
Signed-off-by: Tahia Khan <tahia.khan@gmail.com>
Acked-by: Julia Lawall <julia.lawall@lip6.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fixes checkpatch warning by renaming pu8Buffer to buffer
and u32Length to length in wilc_gnrl_info_received.
Signed-off-by: Tahia Khan <tahia.khan@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fixes checkpatch warning by renaming pu8Buffer to buffer
and u32Length to length in wilc_network_info_received.
Signed-off-by: Tahia Khan <tahia.khan@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fixes checkpatch warning by renaming pu8Buffer to buffer
and u32Length to length in wilc_scan_complete_received.
Signed-off-by: Tahia Khan <tahia.khan@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch fixes the checkpatch issue:
CHECK: Logical continuations should be on the previous line.
Signed-off-by: Arushi Singhal <arushisinghal19971997@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
function prototype argument should have an identifier name as reported
by checkpatch.pl.
Signed-off-by: Arushi Singhal <arushisinghal19971997@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add a sanity check that wid.val has been allocated, fixes a null
pointer deference on stamac when calling ether_add_copy.
Detected by CoverityScan, CID#1369537 ("Dereference null return value")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The check for result < 0 is redundant because at that point result
is always zero, hence we can remove this check and the netdev_err
message.
Detected by CoverityScan, CID#1357147 ("Logically Dead Code")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Change name of str_rssi to rssi_history within the network_info
struct for clarity.
Signed-off-by: Tahia Khan <tahia.khan@gmail.com>
Acked-by: Julia Lawall <julia.lawall@lip6.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Remove Hungarian notation and camel casing from all tstrRSSI members'
names. Additionally, change type of u8Full to bool since it only takes
values 1 or 0.
Signed-off-by: Tahia Khan <tahia.khan@gmail.com>
Acked-by: Julia Lawall <julia.lawall@lip6.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Rename struct tstrRSSI to rssi_history_buffer for clarity
and to remove camel casing.
Signed-off-by: Tahia Khan <tahia.khan@gmail.com>
Acked-by: Julia Lawall <julia.lawall@lip6.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fix typos and add the following to the scripts/spelling.txt:
deintializing||deinitializing
deintialize||deinitialize
deintialized||deinitialized
Link: http://lkml.kernel.org/r/1481573103-11329-28-git-send-email-yamada.masahiro@socionext.com
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Fix a checkpatch.pl WARNING: line over 80 characters
Signed-off-by: Jacob Zachariah <jacob_z@yahoo.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fixes checkpatch CHECK: Alignment should match open parenthesis
Signed-off-by: Scott Matheina <scott@matheina.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fixes checkpatch CHECK: Alignment should match open parenthesis
Signed-off-by: Scott Matheina <scott@matheina.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fixes checkpatch CHECK: Alignment should match open parenthesis
Signed-off-by: Scott Matheina <scott@matheina.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fixes checkpatch warning: braces {} should be used on all arms of
this statement
Signed-off-by: Scott Matheina <scott@matheina.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Connect to the highest rssi with the required SSID in the shadow
table if the connection criteria is based only on the SSID.
For the first matching SSID, an index to the table is saved.
Later the index is updated if matching SSID has a higher
RSSI value than the last saved index.
However if decision is made based on BSSID, there is only one match
in the table and corresponding index is used.
changes in v2:
initialize sel_bssi_idx to UINT_MAX.
Combine two checks for identifying
sel_bssi_idx value for a SSID.
Signed-off-by: Aditya Shankar <aditya.shankar@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Here's the "big" staging/iio pull request for 4.10-rc1.
Not as big as 4.9 was, but still just over a thousand changes. We
almost broke even of lines added vs. removed, as the slicoss driver was
removed (got a "clean" driver for the same hardware through the netdev
tree), and some iio drivers were also dropped, but I think we ended up
adding a few thousand lines to the source tree in the end. Other than
that it's a lot of minor fixes all over the place, nothing major stands
out at all.
All of these have been in linux-next for a while. There will be a merge
conflict with Al's vfs tree in the lustre code, but the resolution for
that should be pretty simple, that too has been in linux-next.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCWFAk1Q8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ymikACg05b0h/iVTTH18474PXXnzw6jk9IAn0gI2fx9
cqp2MglTvphhrXzddL7V
=MeTw
-----END PGP SIGNATURE-----
Merge tag 'staging-4.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
Pull staging/IIO updates from Greg KH:
"Here's the "big" staging/iio pull request for 4.10-rc1.
Not as big as 4.9 was, but still just over a thousand changes. We
almost broke even of lines added vs. removed, as the slicoss driver
was removed (got a "clean" driver for the same hardware through the
netdev tree), and some iio drivers were also dropped, but I think we
ended up adding a few thousand lines to the source tree in the end.
Other than that it's a lot of minor fixes all over the place, nothing
major stands out at all.
All of these have been in linux-next for a while. There will be a
merge conflict with Al's vfs tree in the lustre code, but the
resolution for that should be pretty simple, that too has been in
linux-next"
* tag 'staging-4.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (1002 commits)
staging: comedi: comedidev.h: Document usage of 'detach' handler
staging: fsl-mc: remove unnecessary info prints from bus driver
staging: fsl-mc: add sysfs ABI doc
staging/lustre/o2iblnd: Fix misspelled attemps->attempts
staging/lustre/o2iblnd: Fix misspelling intialized->intialized
staging/lustre: Convert all bare unsigned to unsigned int
staging/lustre/socklnd: Fix whitespace problem
staging/lustre/o2iblnd: Add missing space
staging/lustre/lnetselftest: Fix potential integer overflow
staging: greybus: audio_module: remove redundant OOM message
staging: dgnc: Fix lines longer than 80 characters
staging: dgnc: fix blank line after '{' warnings.
staging/android: remove Sync Framework tasks from TODO
staging/lustre/osc: Revert erroneous list_for_each_entry_safe use
staging: slicoss: remove the staging driver
staging: lustre: libcfs: remove lnet upcall code
staging: lustre: remove set but unused variables
staging: lustre: osc: set lock data for readahead lock
staging: lustre: import: don't reconnect during connect interpret
staging: lustre: clio: remove mtime check in vvp_io_fault_start()
...
Since offset is zero, it's not necessary to use set function. Reset
function is straightforward, and will remove the unnecessary add
operation in set function.
Signed-off-by: Zhang Shengju <zhangshengju@cmss.chinamobile.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
With gcc-7, I got a new warning for this driver:
wilc1000/linux_wlan.c: In function 'wilc_netdev_cleanup':
wilc1000/linux_wlan.c:1224:15: error: 'vif[1]' may be used uninitialized in this function [-Werror=maybe-uninitialized]
wilc1000/linux_wlan.c:1224:15: error: 'vif[0]' may be used uninitialized in this function [-Werror=maybe-uninitialized]
A closer look at the function reveals that it's more complex than
it needs to be, given that based on how the device is created
we always get
netdev_priv(vif->ndev) == vif
Based on this assumption, I found a few other places in the same file
that can be simplified. That code appears to be a relic from times
when the assumption above was not valid.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This resolves a merge issue with
drivers/staging/iio/accel/sca3000_core.c and we want the fixes all in
here as well.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Semaphore are going away in the future, so remove the unused function
wilc_lock_timeout which calls a semaphore api but has no users.
Signed-off-by: Binoy Jayan <binoy.jayan@linaro.org>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Extern variables and functions used in only one file were removed
from .h files, and made static in the .c files they're used.
Extern variable wilc_initialized was declared and never used, so it was
removed.
Signed-off-by: Elise Lennion <elise.lennion@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Commit 2518ac59eb27 ("staging: wilc1000: Replace kthread with workqueue
for host interface") adds an unconditional destroy_workqueue() on the
wilc's "hif_workqueue" soon after its creation thereby rendering
it unusable. It then further attempts to queue work onto this
non-existing hif_worqueue and results in:
Unable to handle kernel NULL pointer dereference at virtual address 00000010
pgd = de478000
[00000010] *pgd=3eec0831, *pte=00000000, *ppte=00000000
Internal error: Oops: 17 [#1] ARM
Modules linked in: wilc1000_sdio(C) wilc1000(C)
CPU: 0 PID: 825 Comm: ifconfig Tainted: G C 4.8.0-rc8+ #37
Hardware name: Atmel SAMA5
task: df56f800 task.stack: deeb0000
PC is at __queue_work+0x90/0x284
LR is at __queue_work+0x58/0x284
pc : [<c0126bb0>] lr : [<c0126b78>] psr: 600f0093
sp : deeb1aa0 ip : def22d78 fp : deea6000
r10: 00000000 r9 : c0a08150 r8 : c0a2f058
r7 : 00000001 r6 : dee9b600 r5 : def22d74 r4 : 00000000
r3 : 00000000 r2 : def22d74 r1 : 07ffffff r0 : 00000000
Flags: nZCv IRQs off FIQs on Mode SVC_32 ISA ARM Segment none
...
[<c0127060>] (__queue_work) from [<c0127298>] (queue_work_on+0x34/0x40)
[<c0127298>] (queue_work_on) from [<bf0076b4>] (wilc_enqueue_cmd+0x54/0x64 [wilc1000])
[<bf0076b4>] (wilc_enqueue_cmd [wilc1000]) from [<bf0082b4>] (wilc_set_wfi_drv_handler+0x48/0x70 [wilc1000])
[<bf0082b4>] (wilc_set_wfi_drv_handler [wilc1000]) from [<bf00509c>] (wilc_mac_open+0x214/0x250 [wilc1000])
[<bf00509c>] (wilc_mac_open [wilc1000]) from [<c04fde98>] (__dev_open+0xb8/0x11c)
[<c04fde98>] (__dev_open) from [<c04fe128>] (__dev_change_flags+0x94/0x158)
[<c04fe128>] (__dev_change_flags) from [<c04fe204>] (dev_change_flags+0x18/0x48)
[<c04fe204>] (dev_change_flags) from [<c0557d5c>] (devinet_ioctl+0x6b4/0x788)
[<c0557d5c>] (devinet_ioctl) from [<c04e40a0>] (sock_ioctl+0x154/0x2cc)
[<c04e40a0>] (sock_ioctl) from [<c01b16e0>] (do_vfs_ioctl+0x9c/0x878)
[<c01b16e0>] (do_vfs_ioctl) from [<c01b1ef0>] (SyS_ioctl+0x34/0x5c)
[<c01b1ef0>] (SyS_ioctl) from [<c0107520>] (ret_fast_syscall+0x0/0x3c)
Code: e5932004 e1520006 01a04003 0affffff (e5943010)
---[ end trace b612328adaa6bf20 ]---
This fix removes the unnecessary call to destroy_workqueue() while opening
the device to avoid the above kernel panic. The deinit routine already
does a good job of terminating the workqueue when no longer needed.
Reported-by: Nicolas Ferre <Nicolas.Ferre@microchip.com>
Fixes: 2518ac59eb27 ("staging: wilc1000: Replace kthread with workqueue for host interface")
Cc: stable@vger.kernel.org # 4.8+
Signed-off-by: Aditya Shankar <Aditya.Shankar@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Simplify function returns by merging assignment and return into
one command line.
Delete unnecesarry return variable.
Found with Coccinelle
@@
expression e, ret;
@@
-ret =
+return
e;
-return ret
Signed-off-by: Mihaela Muraru <mihaela.muraru21@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch fixes the following checkpatch.pl warning: Prefer
ether_addr_copy() over memcpy() if the Ethernet addresses are
__aligned(2)
According to ether_addr_copy() description and functionality, all
Ethernet addresses should align to the u16 datatype.
Here is the output of pahole for the relevant datastructures:
struct del_sta {
u8 mac_addr[6]; /* 0 6 */
/* size: 6, cachelines: 1, members: 1 */
/* last cacheline: 6 bytes */
};
struct sta_inactive_t {
u8 mac[6]; /* 0 6 */
/* size: 6, cachelines: 1, members: 1 */
/* last cacheline: 6 bytes */
};
Signed-off-by: Mihaela Muraru <mihaela.muraru21@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
