80691a8ac7
11062 Commits
Author | SHA1 | Message | Date | |
---|---|---|---|---|
Geert Uytterhoeven
|
41fe32ecc7 |
MAINTAINERS: Add DT Bindings for Renesas Pin Function Controllers
The "PIN CONTROLLER - RENESAS" section lacks the related DT bindings. Add them. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Link: https://lore.kernel.org/r/20200417141003.22816-1-geert+renesas@glider.be |
||
Linus Torvalds
|
3b50142d85 |
MAINTAINERS: sort field names for all entries
This sorts the actual field names too, potentially causing even more chaos and confusion at merge time if you have edited the MAINTAINERS file. But the end result is a more consistent layout, and hopefully it's a one-time pain minimized by doing this just before the -rc1 release. This was entirely scripted: ./scripts/parse-maintainers.pl --input=MAINTAINERS --output=MAINTAINERS --order Requested-by: Joe Perches <joe@perches.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
Linus Torvalds
|
4400b7d68f |
MAINTAINERS: sort entries by entry name
They are all supposed to be sorted, but people who add new entries don't always know the alphabet. Plus sometimes the entry names get edited, and people don't then re-order the entry. Let's see how painful this will be for merging purposes (the MAINTAINERS file is often edited in various different trees), but Joe claims there's relatively few patches in -next that touch this, and doing it just before -rc1 is likely the best time. Fingers crossed. This was scripted with /scripts/parse-maintainers.pl --input=MAINTAINERS --output=MAINTAINERS but then I also ended up manually upper-casing a few entry names that stood out when looking at the end result. Requested-by: Joe Perches <joe@perches.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
Linus Torvalds
|
b032227c62 |
nios2 update for v5.7-rc1
MAINTAINERS: Remove nios2-dev@lists.rocketboards.org arch: nios2: remove 'resetvalue' property arch: nios2: rename 'altr,gpio-bank-width' -> 'altr,ngpio' arch: nios2: Enable the common clk subsystem on Nios2 -----BEGIN PGP SIGNATURE----- Version: GnuPG v1 iQIcBAABAgAGBQJekLG3AAoJEFWoEK+e3syCY2EP/3aMWVLoVXNjSGu2S4BSinQs IEag621TYh3EXI4YXoZ46lMbwTLBZtoRwF3r5MTGHcJi0R5CtTIlIvb3h6NBUlzO 7lnefhjXVT70RIRaVo+jwOWfXmP1+i+VQ+7rPlUwEf9R9us3QeUgs6awfNCl5qvK 7bMgSySHTGJwUaM0K9QzN857+8NVPwA4b3hzx1jl/mwZ2LXlE/cesPW78x0sXudJ jUapo9FLsnkowm3G1OgXQ6vqoUheADMav4liW1Q2q9Oc1vJsXuSLTNT8+sn0AmoK oK2jWUw70xFuR5gVbWtIBg4/OKsbWmVcwjyIiMEe4ewmR93epcubzL7RbOGi5dWo sAM92bQ1QIeYtrk4MbouKuKbsPGpBd0ml8FIe8Cyr6pkaT+yI6kYCZVYBE0Drfnv HcUua7js9n891CTTISDo4DU+IOF5ZtR1Y7mJK1dDFDJa4d2F+XKowmV77mPZN6Hr 7h8VzqMu1l17kOc0sWETMySmZ0MbXnfGNRjvx5jrb7gF/Z02+ec8s0LaLrDmJ8Mr RYMby+83oApvl1tBQPNQREVNS3EqBsptwOxhlI+1cxjXAKEMBzGXlYUhcwkiUSks LXRWuGyXt+26PRctKm7z9+g3HvwnRZDfZ4nZQaW9IrGcXw+dRQpIGrI7GJ/tklLy +LH9lOqZmnWekkkGHoMs =K/BF -----END PGP SIGNATURE----- Merge tag 'nios2-v5.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/lftan/nios2 Pull nios2 updates from Ley Foon Tan: - Remove nios2-dev@lists.rocketboards.org from MAINTAINERS - remove 'resetvalue' property - rename 'altr,gpio-bank-width' -> 'altr,ngpio' - enable the common clk subsystem on Nios2 * tag 'nios2-v5.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/lftan/nios2: MAINTAINERS: Remove nios2-dev@lists.rocketboards.org arch: nios2: remove 'resetvalue' property arch: nios2: rename 'altr,gpio-bank-width' -> 'altr,ngpio' arch: nios2: Enable the common clk subsystem on Nios2 |
||
Pali Rohár
|
149ed3d404 |
change email address for Pali Rohár
For security reasons I stopped using gmail account and kernel address is now up-to-date alias to my personal address. People periodically send me emails to address which they found in source code of drivers, so this change reflects state where people can contact me. [ Added .mailmap entry as per Joe Perches - Linus ] Signed-off-by: Pali Rohár <pali@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Joe Perches <joe@perches.com> Link: http://lkml.kernel.org/r/20200307104237.8199-1-pali@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
Ley Foon Tan
|
0ec8a5054d |
MAINTAINERS: Remove nios2-dev@lists.rocketboards.org
nios2-dev@lists.rocketboards.org mailing list is no longer supported, remove it from MAINTAINERS file. Signed-off-by: Ley Foon Tan <ley.foon.tan@intel.com> |
||
Linus Torvalds
|
9b06860d7c |
libnvdimm for 5.7
- Add support for region alignment configuration and enforcement to fix compatibility across architectures and PowerPC page size configurations. - Introduce 'zero_page_range' as a dax operation. This facilitates filesystem-dax operation without a block-device. - Introduce phys_to_target_node() to facilitate drivers that want to know resulting numa node if a given reserved address range was onlined. - Advertise a persistence-domain for of_pmem and papr_scm. The persistence domain indicates where cpu-store cycles need to reach in the platform-memory subsystem before the platform will consider them power-fail protected. - Promote numa_map_to_online_node() to a cross-kernel generic facility. - Save x86 numa information to allow for node-id lookups for reserved memory ranges, deploy that capability for the e820-pmem driver. - Pick up some miscellaneous minor fixes, that missed v5.6-final, including a some smatch reports in the ioctl path and some unit test compilation fixups. - Fixup some flexible-array declarations. -----BEGIN PGP SIGNATURE----- iQIzBAABCAAdFiEEf41QbsdZzFdA8EfZHtKRamZ9iAIFAl6LtIAACgkQHtKRamZ9 iAIwRA/8CLVVuQpgHQ1tqK4h8CZPrISFXh7wy7uhocEU2xrDh6iGVnLztmoLRr2k 5f8T9lRzreSAwIVL5DbGqP1pFncqIt9VMnKsFlaPMBGCBNR+hURY0iBCNjIT+jiq BOzLd52MR2rqJxeXGTMUbWrBrbmuj4mZPdmGVuFFe7GFRpoaVpCgOo+296eWa/ot gIOFUTonZY7STYjNvDok0TXCmiCFuJb+P+y5ldfCPShHvZhTiaF53jircja8vAjO G5dt8ixBKUK0rXRc4SEQsQhAZNcAFHb6Gy5lg4C2QzhTF374xTc9usJZNWbIE9iM 5mipBYvjVuoY+XaCNZDkaRcJIy/jqB15O6l3QIWbZLGaK9m95YPp9LmkPFwd3JpO e3rO24ML471DxqB9iWIiJCNcBBocLOlnd6qAQTpppWDpGNbudwXvfsmKHmKIScSE x+IDCdscLmmm+WG2dLmLraWOVPu42xZFccoQCi4M3TTqfeB9pZ9XckFQ37zX62zG 5t+7Ek+t1W4QVt/JQYVKH03XT15sqUpVknvx0Hl4Y5TtbDOkFLkO8RN0/HyExDef 7iegS35kqTsM4EfZQ+9juKbI2JBAjHANcbj0V4dogqaRj6vr3akumBzUtuYqAofv qU3s9skmLsEemOJC+ns2PT8vl5dyIoeDfH0r2XvGWxYqolMqJpA= =sY4N -----END PGP SIGNATURE----- Merge tag 'libnvdimm-for-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm Pull libnvdimm and dax updates from Dan Williams: "There were multiple touches outside of drivers/nvdimm/ this round to add cross arch compatibility to the devm_memremap_pages() interface, enhance numa information for persistent memory ranges, and add a zero_page_range() dax operation. This cycle I switched from the patchwork api to Konstantin's b4 script for collecting tags (from x86, PowerPC, filesystem, and device-mapper folks), and everything looks to have gone ok there. This has all appeared in -next with no reported issues. Summary: - Add support for region alignment configuration and enforcement to fix compatibility across architectures and PowerPC page size configurations. - Introduce 'zero_page_range' as a dax operation. This facilitates filesystem-dax operation without a block-device. - Introduce phys_to_target_node() to facilitate drivers that want to know resulting numa node if a given reserved address range was onlined. - Advertise a persistence-domain for of_pmem and papr_scm. The persistence domain indicates where cpu-store cycles need to reach in the platform-memory subsystem before the platform will consider them power-fail protected. - Promote numa_map_to_online_node() to a cross-kernel generic facility. - Save x86 numa information to allow for node-id lookups for reserved memory ranges, deploy that capability for the e820-pmem driver. - Pick up some miscellaneous minor fixes, that missed v5.6-final, including a some smatch reports in the ioctl path and some unit test compilation fixups. - Fixup some flexible-array declarations" * tag 'libnvdimm-for-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm: (29 commits) dax: Move mandatory ->zero_page_range() check in alloc_dax() dax,iomap: Add helper dax_iomap_zero() to zero a range dax: Use new dax zero page method for zeroing a page dm,dax: Add dax zero_page_range operation s390,dcssblk,dax: Add dax zero_page_range operation to dcssblk driver dax, pmem: Add a dax operation zero_page_range pmem: Add functions for reading/writing page to/from pmem libnvdimm: Update persistence domain value for of_pmem and papr_scm device tools/test/nvdimm: Fix out of tree build libnvdimm/region: Fix build error libnvdimm/region: Replace zero-length array with flexible-array member libnvdimm/label: Replace zero-length array with flexible-array member ACPI: NFIT: Replace zero-length array with flexible-array member libnvdimm/region: Introduce an 'align' attribute libnvdimm/region: Introduce NDD_LABELING libnvdimm/namespace: Enforce memremap_compat_align() libnvdimm/pfn: Prevent raw mode fallback if pfn-infoblock valid libnvdimm: Out of bounds read in __nd_ioctl() acpi/nfit: improve bounds checking for 'func' mm/memremap_pages: Introduce memremap_compat_align() ... |
||
Linus Torvalds
|
0906d8b975 |
IOMMU Updates for Linux v5.7
Including: - ARM-SMMU support for the TLB range invalidation command in SMMUv3.2. - ARM-SMMU introduction of command batching helpers to batch up CD and ATC invalidation. - ARM-SMMU support for PCI PASID, along with necessary PCI symbol exports. - Introduce a generic (actually rename an existing) IOMMU related pointer in struct device and reduce the IOMMU related pointers. - Some fixes for the OMAP IOMMU driver to make it build on 64bit architectures. - Various smaller fixes and improvements. -----BEGIN PGP SIGNATURE----- iQIzBAABCAAdFiEEr9jSbILcajRFYWYyK/BELZcBGuMFAl6MmlQACgkQK/BELZcB GuP9ug//QtyPYRYdO4ltD6mPvfB7V0qdXksJz+ZVbPOMvqUs1jr1FVYFH1HkOVu5 mFD6OJuQQJrrGukXMERyVgDhUqNr+xHrkGS+X67NrOkUrguyvUfLYSU/GmOH/kdk w1Smp7pTcHHAMmxGyQWTSFa9jSxKes5ZYBo065Z3/SlcIcTTkbw7V87N3RPrlnCX s/K7CtSGnKJMpL9DVuNH27eqGlfiuIrQhj/vTQVSn1nF7TjaGKXaRXj+3fcUgrIt KAfflWiTJncMY6WLjz65iiUtUvgA2Mmgn3CKJnWjgECd70+NybLQ9OAvQO+A2H6s 8XO9DsOOe8HFq/ljev1JGSw5LgB5Ip1RtSk7Ost6mkUFzLlaeTBJFQeHbECI9dne hksRYL4R8bwiQu+MkQe7HLa6TDb+asqjsayIO3M1oIpF+8mIz/oNOGCeP0cqSiuj lVMnblAWatrsZrf+AlxZKddIJWiduXoTjtpV64HTTvZeL4/g3kY0ykBXpS4xLj5V s0KvR6kjR1LYUgpe9jJ3CJTdIlU4MzSlrtq4CYFZvRa7rBLmk2cGsR1jiA3GTGpn bcqOQNgb5X1mpAzmOZb//pbjozgvCjQpQexyU4tRzs38yk+TK5OnOe5z4M1srHPY 7dTZoUEpAcRm4K+JFQ3+yOtxRTsINYyFUL/Qt8ALbWy4hXluRGY= =nhuS -----END PGP SIGNATURE----- Merge tag 'iommu-updates-v5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu Pull iommu updates from Joerg Roedel: - ARM-SMMU support for the TLB range invalidation command in SMMUv3.2 - ARM-SMMU introduction of command batching helpers to batch up CD and ATC invalidation - ARM-SMMU support for PCI PASID, along with necessary PCI symbol exports - Introduce a generic (actually rename an existing) IOMMU related pointer in struct device and reduce the IOMMU related pointers - Some fixes for the OMAP IOMMU driver to make it build on 64bit architectures - Various smaller fixes and improvements * tag 'iommu-updates-v5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (39 commits) iommu: Move fwspec->iommu_priv to struct dev_iommu iommu/virtio: Use accessor functions for iommu private data iommu/qcom: Use accessor functions for iommu private data iommu/mediatek: Use accessor functions for iommu private data iommu/renesas: Use accessor functions for iommu private data iommu/arm-smmu: Use accessor functions for iommu private data iommu/arm-smmu: Refactor master_cfg/fwspec usage iommu/arm-smmu-v3: Use accessor functions for iommu private data iommu: Introduce accessors for iommu private data iommu/arm-smmu: Fix uninitilized variable warning iommu: Move iommu_fwspec to struct dev_iommu iommu: Rename struct iommu_param to dev_iommu iommu/tegra-gart: Remove direct access of dev->iommu_fwspec drm/msm/mdp5: Remove direct access of dev->iommu_fwspec ACPI/IORT: Remove direct access of dev->iommu_fwspec iommu: Define dev_iommu_fwspec_get() for !CONFIG_IOMMU_API iommu/virtio: Reject IOMMU page granule larger than PAGE_SIZE iommu/virtio: Fix freeing of incomplete domains iommu/virtio: Fix sparse warning iommu/vt-d: Add build dependency on IOASID ... |
||
Linus Torvalds
|
9bb715260e |
virtio: fixes, vdpa
Some bug fixes. The new vdpa subsystem with two first drivers. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> -----BEGIN PGP SIGNATURE----- iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAl6MS7wPHG1zdEByZWRo YXQuY29tAAoJECgfDbjSjVRpGp8H/2H49Gya1cfVbGU13qgmBSQqQXC8hS3iNLuG ltRgU+jafJT//kvkdm3/DUzfK3eRUWUfqZLKEbAQDtMY0OGHi/KGEBYVLDde7Zxt Lg4VnwBhkYDR/f01ZZDbHxzj9JAr83i28nILjLIqf3a1BX4zf203+ZE0/JM8a7wL dOPoH7NAfyz5ul2F67bR1IOF8vC6TidpavzR2+HC/MocHYXb6Bgfvt+i4EcrfuMf 9lnBfajgklKr9sNJniwvvR1pWVg+YyG3VeC6T8tIC/xzbCmIoNT+5b3q2XPSIHq1 EuQTeXH9CBFXS0qcFlq2ktR1xd1Lx95hKwZpqLwLFDmfgjhV2QU= =/84P -----END PGP SIGNATURE----- Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost Pull virtio updates from Michael Tsirkin: - Some bug fixes - The new vdpa subsystem with two first drivers * tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: virtio-balloon: Revert "virtio-balloon: Switch back to OOM handler for VIRTIO_BALLOON_F_DEFLATE_ON_OOM" vdpa: move to drivers/vdpa virtio: Intel IFC VF driver for VDPA vdpasim: vDPA device simulator vhost: introduce vDPA-based backend virtio: introduce a vDPA based transport vDPA: introduce vDPA bus vringh: IOTLB support vhost: factor out IOTLB vhost: allow per device message handler vhost: refine vhost and vringh kconfig virtio-balloon: Switch back to OOM handler for VIRTIO_BALLOON_F_DEFLATE_ON_OOM virtio-net: Introduce hash report feature virtio-net: Introduce RSS receive steering feature virtio-net: Introduce extended RSC feature tools/virtio: option to build an out of tree module |
||
Joe Perches
|
6680125ea5 |
MAINTAINERS: list the section entries in the preferred order
The MAINTAINERS file header has never shown a preferred order for the section entries but scripts/parse-maintainers.pl added a preferred order with commit |
||
Linus Torvalds
|
d38c07afc3 |
powerpc updates for 5.7
- A large series from Nick for 64-bit to further rework our exception vectors, and rewrite portions of the syscall entry/exit and interrupt return in C. The result is much easier to follow code that is also faster in general. - Cleanup of our ptrace code to split various parts out that had become badly intertwined with #ifdefs over the years. - Changes to our NUMA setup under the PowerVM hypervisor which should hopefully avoid non-sensical topologies which can lead to warnings from the workqueue code and other problems. - MAINTAINERS updates to remove some of our old orphan entries and update the status of others. - Quite a few other small changes and fixes all over the map. Thanks to: Abdul Haleem, afzal mohammed, Alexey Kardashevskiy, Andrew Donnellan, Aneesh Kumar K.V, Balamuruhan S, Cédric Le Goater, Chen Zhou, Christophe JAILLET, Christophe Leroy, Christoph Hellwig, Clement Courbet, Daniel Axtens, David Gibson, Douglas Miller, Fabiano Rosas, Fangrui Song, Ganesh Goudar, Gautham R. Shenoy, Greg Kroah-Hartman, Greg Kurz, Gustavo Luiz Duarte, Hari Bathini, Ilie Halip, Jan Kara, Joe Lawrence, Joe Perches, Kajol Jain, Larry Finger, Laurentiu Tudor, Leonardo Bras, Libor Pechacek, Madhavan Srinivasan, Mahesh Salgaonkar, Masahiro Yamada, Masami Hiramatsu, Mauricio Faria de Oliveira, Michael Neuling, Michal Suchanek, Mike Rapoport, Nageswara R Sastry, Nathan Chancellor, Nathan Lynch, Naveen N. Rao, Nicholas Piggin, Nick Desaulniers, Oliver O'Halloran, Po-Hsu Lin, Pratik Rajesh Sampat, Rasmus Villemoes, Ravi Bangoria, Roman Bolshakov, Sam Bobroff, Sandipan Das, Santosh S, Sedat Dilek, Segher Boessenkool, Shilpasri G Bhat, Sourabh Jain, Srikar Dronamraju, Stephen Rothwell, Tyrel Datwyler, Vaibhav Jain, YueHaibing. -----BEGIN PGP SIGNATURE----- iQJHBAABCAAxFiEEJFGtCPCthwEv2Y/bUevqPMjhpYAFAl6JypATHG1wZUBlbGxl cm1hbi5pZC5hdQAKCRBR6+o8yOGlgOTyD/0U90tXb3VXlQcc4OFIb8vWIj76k4Zn ZSZ7RyOuvb5pCISBZjSK79XkR9eMHT77qagX4V41q64k4yQl8nbgLeVnwL76hLLc IJCs23f4nsO0uqX/MhSCc5dfOOOS2i8V+OQYtsYWsH5QaG95v0cHIqVaHHMlfQxu 507GO/W5W6KTd4x008b5unQOuE51zMKlKvqEJXkT59obQFpaa2S5Wn7OzhsnarCH YSRNxaC7vtgBKLA9wUnFh8UUbh0FbOwXBCaq4OhHMhgRihdteVBCzlcR/6c+IRbt EoZxKzfQ0hI1z5f++kJNaRXMtUbSpM8D1HdKKHgiWjpdBSD0eu2X106KQT2R2ZOF qhX8xPLWNzdBglA6L43AaZUu+4ayd3QrrJIkjDv/K1rCHZjfGOzSQfoZgTEBNLFA tC0crhEfw8m98e4EwhCtekGQxdczRdLS9YvtC/h6mU2xkpA35yNSwB1/iuVQdkYD XyrEqImAQ1PJla7NL0hxSy5ZxrBtMeKT4WZZ0BNgKXryemldg8Tuv3AEyach3BHz eU0pIwpbnPm1JAPyrpDQ1yEf7QsD77gTPfEvilEci60R9DhvIMGAY+pt0qfME3yX wOLp2yVBEXlRmvHk/y/+r+m4aCsmwSrikbWwmLLwAAA6JehtzFOWxTEfNpACP23V mZyyZznsHIIE3Q== =ARdm -----END PGP SIGNATURE----- Merge tag 'powerpc-5.7-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc updates from Michael Ellerman: "Slightly late as I had to rebase mid-week to insert a bug fix: - A large series from Nick for 64-bit to further rework our exception vectors, and rewrite portions of the syscall entry/exit and interrupt return in C. The result is much easier to follow code that is also faster in general. - Cleanup of our ptrace code to split various parts out that had become badly intertwined with #ifdefs over the years. - Changes to our NUMA setup under the PowerVM hypervisor which should hopefully avoid non-sensical topologies which can lead to warnings from the workqueue code and other problems. - MAINTAINERS updates to remove some of our old orphan entries and update the status of others. - Quite a few other small changes and fixes all over the map. Thanks to: Abdul Haleem, afzal mohammed, Alexey Kardashevskiy, Andrew Donnellan, Aneesh Kumar K.V, Balamuruhan S, Cédric Le Goater, Chen Zhou, Christophe JAILLET, Christophe Leroy, Christoph Hellwig, Clement Courbet, Daniel Axtens, David Gibson, Douglas Miller, Fabiano Rosas, Fangrui Song, Ganesh Goudar, Gautham R. Shenoy, Greg Kroah-Hartman, Greg Kurz, Gustavo Luiz Duarte, Hari Bathini, Ilie Halip, Jan Kara, Joe Lawrence, Joe Perches, Kajol Jain, Larry Finger, Laurentiu Tudor, Leonardo Bras, Libor Pechacek, Madhavan Srinivasan, Mahesh Salgaonkar, Masahiro Yamada, Masami Hiramatsu, Mauricio Faria de Oliveira, Michael Neuling, Michal Suchanek, Mike Rapoport, Nageswara R Sastry, Nathan Chancellor, Nathan Lynch, Naveen N. Rao, Nicholas Piggin, Nick Desaulniers, Oliver O'Halloran, Po-Hsu Lin, Pratik Rajesh Sampat, Rasmus Villemoes, Ravi Bangoria, Roman Bolshakov, Sam Bobroff, Sandipan Das, Santosh S, Sedat Dilek, Segher Boessenkool, Shilpasri G Bhat, Sourabh Jain, Srikar Dronamraju, Stephen Rothwell, Tyrel Datwyler, Vaibhav Jain, YueHaibing" * tag 'powerpc-5.7-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (158 commits) powerpc: Make setjmp/longjmp signature standard powerpc/cputable: Remove unnecessary copy of cpu_spec->oprofile_type powerpc: Suppress .eh_frame generation powerpc: Drop -fno-dwarf2-cfi-asm powerpc/32: drop unused ISA_DMA_THRESHOLD powerpc/powernv: Add documentation for the opal sensor_groups sysfs interfaces selftests/powerpc: Fix try-run when source tree is not writable powerpc/vmlinux.lds: Explicitly retain .gnu.hash powerpc/ptrace: move ptrace_triggered() into hw_breakpoint.c powerpc/ptrace: create ppc_gethwdinfo() powerpc/ptrace: create ptrace_get_debugreg() powerpc/ptrace: split out ADV_DEBUG_REGS related functions. powerpc/ptrace: move register viewing functions out of ptrace.c powerpc/ptrace: split out TRANSACTIONAL_MEM related functions. powerpc/ptrace: split out SPE related functions. powerpc/ptrace: split out ALTIVEC related functions. powerpc/ptrace: split out VSX related functions. powerpc/ptrace: drop PARAMETER_SAVE_AREA_OFFSET powerpc/ptrace: drop unnecessary #ifdefs CONFIG_PPC64 powerpc/ptrace: remove unused header includes ... |
||
Linus Torvalds
|
3476195651 |
There's not much to see in the core framework this time around. Instead the
majority of the diff is the normal collection of driver additions for new SoCs and non-critical clk data fixes and updates. The framework must be middle aged. The two biggest directories in the diffstat show that the Qualcomm and Unisoc support added a handful of big drivers for new SoCs but that's not really the whole story because those new drivers tend to add large numbers of lines of clk data. There's a handful of AT91 clk drivers added this time around too and a bunch of improvements to drivers like the i.MX driver. All around lots of updates and fixes in various clk drivers which is good to see. The core framework has only one real major change which has been baking in next for the past couple months. It fixes the framework so that it stops caching a clk's phase when the phase clk_op returns an error. Before this change we would consider some negative errno as a phase and that just doesn't make sense. Core: - Don't show clk phase when it is invalid New Drivers: - Add support for Unisoc SC9863A clks - Qualcomm SM8250 RPMh and MSM8976 RPM clks - Qualcomm SM8250 Global Clock Controller (GCC) support - Qualcomm SC7180 Modem Clock Controller (MSS CC) support - EHRPWM's TimeBase clock(TBCLK) for TI AM654 SoCs - Support PMC clks on at91sam9n12, at91rm9200, sama5d3, and at91sam9g45 SoCs Updates: - GPU GX GDSC support on Qualcomm sc7180 - Fixes and improvements for the Marvell MMP2/MMP3 SoC clk drivers - A series from Anson to convert i.MX8 clock bindings to json-schema - Update i.MX pll14xx driver to include new frequency entries for pll1443x table, and return error for invalid PLL type - Add missing of_node_put() call for a number of i.MX clock drivers - Drop flag CLK_IS_CRITICAL from 'A53_CORE' mux clock, as we already have the flag on its child cpu clock - Fix a53 cpu clock for i.MX8 drivers to get it source from ARM PLL via CORE_SEL slice, and source from A53 CCM clk root when we need to change ARM PLL frequency. Thus, we can support core running above 1GHz safely - Update i.MX pfdv2 driver to check zero rate and use determine_rate for getting the best rate - Add CLKO2 for imx8mm, SNVS clock for imx8mn, and PXP clock for imx7d - Remove PMC clks from Tegra clk driver - Improved clock/reset handling for the Renesas R-Car USB2 Clock Selector - Conversion to json-schema of the Renesas CPG/MSSR DT bindings - Add Crypto clocks on Renesas R-Car M3-W/W+, M3-N, E3, and D3 - Add RPC (QSPI/HyperFLASH) clocks on Renesas R-Car H3, M3-W/W+, and M3-N - Update Amlogic audio clock gate hierarchy for meson8 and gxbb - Update Amlogic g12a spicc clock sources - Support for Ingenic X1000 TCU clks -----BEGIN PGP SIGNATURE----- iQJFBAABCAAvFiEE9L57QeeUxqYDyoaDrQKIl8bklSUFAl6JDxURHHNib3lkQGtl cm5lbC5vcmcACgkQrQKIl8bklSU51A/+OzAA4HyywcSwLWMhUbyWI0hWis8/Gdtv /tIOPY/+J/Wi+2vFXoZEQWr/GViEEC1ylQwtkc/cm1WklEka/+q+GJFawyyIfX2i ovofDWw5lJd4/ACaOqV4ryEppwHnPUvASvoIOUXX6IwauNQzI0dRZWTOLTg2YW7x uvI5OtQ8o71+bM+VL1tuhWvN/4Zx9tALNU9yhaRhHdafR+xQ0d4x5bBQo8MG/2E0 3xIbRqGbhO6XfNiKAjgKcI3jtHn006LK1/1AjyXUETWzu5Zcg2SYb/YAah39RKLZ FTV+xY39C8JBLPt6ZLrBu9mPDcoQOWohmnDLki0qm65cfVs/tbDX3kwp3ixCly7y jSCqNpl7RuWcbjMe8YesakhJc1IFICQts08KsM6dPipL+7iAv++fNQrfrnXf0cDx cPCgDkepos/aRhNXmVFdxf2FRKkIQjYpdAPFdYSvLv6MK0Dk6G7/EhOOXA10Z2BU BojY8tUx/YaC8sRbnZlhitYfpqDVFzdihL2G6W31iUbt1sKYR6t6Szhct2EbRTOQ 69bUy2lw7M8pk1Remp0LqdrVUDYLy0/X3dVaa/teIaZt2Ac1NnWzHw9LMmnlFFEG GxuZy5Q5fCKbAf0tSkD4Gzb9z8f0pzAyfdlpGsY7+eEEWloc4yNFCcFcNyzJTXWV 4kdye0klUPs= =ZoI6 -----END PGP SIGNATURE----- Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux Pull clk updates from Stephen Boyd: "There's not much to see in the core framework this time around. Instead the majority of the diff is the normal collection of driver additions for new SoCs and non-critical clk data fixes and updates. The framework must be middle aged. The two biggest directories in the diffstat show that the Qualcomm and Unisoc support added a handful of big drivers for new SoCs but that's not really the whole story because those new drivers tend to add large numbers of lines of clk data. There's a handful of AT91 clk drivers added this time around too and a bunch of improvements to drivers like the i.MX driver. All around lots of updates and fixes in various clk drivers which is good to see. The core framework has only one real major change which has been baking in next for the past couple months. It fixes the framework so that it stops caching a clk's phase when the phase clk_op returns an error. Before this change we would consider some negative errno as a phase and that just doesn't make sense. Core: - Don't show clk phase when it is invalid New Drivers: - Add support for Unisoc SC9863A clks - Qualcomm SM8250 RPMh and MSM8976 RPM clks - Qualcomm SM8250 Global Clock Controller (GCC) support - Qualcomm SC7180 Modem Clock Controller (MSS CC) support - EHRPWM's TimeBase clock(TBCLK) for TI AM654 SoCs - Support PMC clks on at91sam9n12, at91rm9200, sama5d3, and at91sam9g45 SoCs Updates: - GPU GX GDSC support on Qualcomm sc7180 - Fixes and improvements for the Marvell MMP2/MMP3 SoC clk drivers - A series from Anson to convert i.MX8 clock bindings to json-schema - Update i.MX pll14xx driver to include new frequency entries for pll1443x table, and return error for invalid PLL type - Add missing of_node_put() call for a number of i.MX clock drivers - Drop flag CLK_IS_CRITICAL from 'A53_CORE' mux clock, as we already have the flag on its child cpu clock - Fix a53 cpu clock for i.MX8 drivers to get it source from ARM PLL via CORE_SEL slice, and source from A53 CCM clk root when we need to change ARM PLL frequency. Thus, we can support core running above 1GHz safely - Update i.MX pfdv2 driver to check zero rate and use determine_rate for getting the best rate - Add CLKO2 for imx8mm, SNVS clock for imx8mn, and PXP clock for imx7d - Remove PMC clks from Tegra clk driver - Improved clock/reset handling for the Renesas R-Car USB2 Clock Selector - Conversion to json-schema of the Renesas CPG/MSSR DT bindings - Add Crypto clocks on Renesas R-Car M3-W/W+, M3-N, E3, and D3 - Add RPC (QSPI/HyperFLASH) clocks on Renesas R-Car H3, M3-W/W+, and M3-N - Update Amlogic audio clock gate hierarchy for meson8 and gxbb - Update Amlogic g12a spicc clock sources - Support for Ingenic X1000 TCU clks" * tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (146 commits) clk: sprd: fix to get a correct ibias of pll dt-bindings: imx8mm-clock: Fix the file path dt-bindings: imx8mq-clock: Fix the file path clk: qcom: rpmh: Drop unnecessary semicolons clk: qcom: rpmh: Simplify clk_rpmh_bcm_send_cmd() clk: tegra: Use NULL for pointer initialization clk: sprd: add clocks support for SC9863A clk: sprd: support to get regmap from parent node clk: sprd: Add macros for referencing parents without strings clk: sprd: Add dt-bindings include file for SC9863A dt-bindings: clk: sprd: add bindings for sc9863a clock controller dt-bindings: clk: sprd: rename the common file name sprd.txt to SoC specific clk: sprd: add gate for pll clocks MAINTAINERS: dt: update reference for arm-integrator.txt clk: mmp2: Fix bit masks for LCDC I/O and pixel clocks clk: mmp2: Add clock for fifth SD HCI on MMP3 dt-bindings: marvell,mmp2: Add clock id for the fifth SD HCI on MMP3 clk: mmp2: Add clocks for the thermal sensors dt-bindings: marvell,mmp2: Add clock ids for the thermal sensors clk: mmp2: add the GPU clocks ... |
||
Linus Torvalds
|
83eb69f3b8 |
Merge branch 'work.exfat' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull exfat filesystem from Al Viro: "Shiny new fs/exfat replacement for drivers/staging/exfat" * 'work.exfat' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: exfat: update file system parameter handling staging: exfat: make staging/exfat and fs/exfat mutually exclusive MAINTAINERS: add exfat filesystem exfat: add Kconfig and Makefile exfat: add nls operations exfat: add misc operations exfat: add exfat cache exfat: add bitmap operations exfat: add fat entry operations exfat: add file operations exfat: add directory operations exfat: add inode operations exfat: add super block operations exfat: add in-memory and on-disk structures and headers |
||
Linus Torvalds
|
bdabb68931 |
RTC for 5.7
Subsystem: - The rtc_time_to_tm and rtc_tm_to_time wrappers have finally been removed and only the 64bit version remain. - hctosys now works with drivers compiled as modules New driver: - MediaTek MT2712 SoC based RTC Drivers: - set range for 88pm860x, au1xxx, cpcap, da9052, davinci, ds1305, ds1374, mcp5121, pl030, pl031, pm8xxx, puv3, sa1100, sirfsoc, starfire, sun6i - ds1307: DS1388 oscillator failure detection and watchdog support - jz4740: JZ4760 support - pcf85063: clock out pin support - sun6i: external 32k oscillator is now optional, the range is now handled by the core, providing a solution for 2034. -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEycoQi/giopmpPgB12wIijOdRNOUFAl6IgdAACgkQ2wIijOdR NOVH9Q//evfZmRDQb9Lm8YuSOt+U6lBaCuvRP8H4s7i02jsw0tt1oT6+rGo+1N+k pi64+iwPqDj7h+eds06jVur7yWZDNNfCSywlMU8ODGLQcc/hXMTvaIeJtdXG+I+7 dpIVTs9Artiey2Qb3qZalSMYzrE2rQG6Yuyb/tHx7Pohvje1wKnAE3T64W6sfvir zjAwAr/+s9n82mjGtGLapz0onao7dSN4p6b3UIkph9KxPdeHjItd7cRiJuzioysj LE8WRUek++uha32PzghK9MoUpRKf8PJtGbsAIRhdwvmwub1Pqs6Uvk5IHQvdiFZx af1Qnw/4qUH03HVUuq8VdEkwa8mdthcZ72b8uzUWOqP+uPkeTTlQOGOd1dRECijK Qic+SKlEznwgKC9WuDufUQg5i2WjFBnBlA+dCE12/t91SbSlZdYjb53nQLHve1b9 e4VfyKnS5Ghn/dfizzzSPdcWuPW1rqq2dHTiOvFVqlLn1Fkt1AKaJzGAeCe6PWp4 AJVqPu+D1eQ/qmvEPXI7dQpCxdI+p6FNJgQvQLMssaq7mpf2fiRoLx23ikFG0v0k BeNkNWpLz2ACwHpsOa/RWLwa/FC2+KBHaRWf+As7te63byeDQC8hUEi7F5K78lSS yhfZ8SJR04SIIGKjuwAzPmaaIJ0hJT+eaxkFAJU7P5hD7KElsuM= =6Veu -----END PGP SIGNATURE----- Merge tag 'rtc-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux Pull RTC updates from Alexandre Belloni: "More cleanup this cycle, with the final goal of removing the rtc_time_to_tm and rtc_tm_to_time wrappers. All the drivers that have been modified for this now are ready for the end of times (whether it happens in 2033, 2038, 2106, 2127 or even 4052). There is also a single new driver and the usual fixes and features. Summary: Subsystem: - The rtc_time_to_tm and rtc_tm_to_time wrappers have finally been removed and only the 64bit version remain. - hctosys now works with drivers compiled as modules New driver: - MediaTek MT2712 SoC based RTC Drivers: - set range for 88pm860x, au1xxx, cpcap, da9052, davinci, ds1305, ds1374, mcp5121, pl030, pl031, pm8xxx, puv3, sa1100, sirfsoc, starfire, sun6i - ds1307: DS1388 oscillator failure detection and watchdog support - jz4740: JZ4760 support - pcf85063: clock out pin support - sun6i: external 32k oscillator is now optional, the range is now handled by the core, providing a solution for 2034" * tag 'rtc-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (87 commits) rtc: ds1307: check for failed memory allocation on wdt rtc: class: remove redundant assignment to variable err rtc: remove rtc_time_to_tm and rtc_tm_to_time rtc: sun6i: let the core handle rtc range rtc: sun6i: switch to rtc_time64_to_tm/rtc_tm_to_time64 rtc: ds1307: add support for watchdog timer on ds1388 rtc: da9052: switch to rtc_time64_to_tm/rtc_tm_to_time64 rtc: da9052: set range rtc: da9052: convert to devm_rtc_allocate_device rtc: imx-sc: Align imx sc msg structs to 4 rtc: fsl-ftm-alarm: report alarm to core rtc: pcf85063: Add pcf85063 clkout control to common clock framework rtc: make definitions in include/uapi/linux/rtc.h actually useful for user space rtc: class: avoid unnecessary lookup in hctosys dt-bindings: rtc: Convert and update jz4740-rtc doc to YAML rtc: jz4740: Rename vendor-specific DT properties rtc: jz4740: Add support for JZ4760 SoC rtc: class: support hctosys from modular RTC drivers rtc: pm8xxx: clear alarm register when alarm is not enabled rtc: omap: drop unused dt-bindings header ... |
||
Linus Torvalds
|
1e396a5d17 |
threads-v5.7
-----BEGIN PGP SIGNATURE----- iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCXoSOqgAKCRCRxhvAZXjc omfTAQDlbSZkzNfEWcxi+WE9tg+Y5tHR7hjdsK99Mb3vhAh5GwD+LT0EOI3WKoNY MQUp2RaR7YwWL/pktd9N1EX8qa5IPg4= =zvBX -----END PGP SIGNATURE----- Merge tag 'threads-v5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux Pull thread updates from Christian Brauner: "The main change for this cycle was the extension for clone3() to support spawning processes directly into cgroups via CLONE_INTO_CGROUP (commit |
||
Linus Torvalds
|
ad0bf4eb91 |
s390 updates for the 5.7 merge window
- Update maintainers. Niklas Schnelle takes over zpci and Vineeth Vijayan common io code. - Extend cpuinfo to include topology information. - Add new extended counters for IBM z15 and sampling buffer allocation rework in perf code. - Add control over zeroing out memory during system restart. - CCA protected key block version 2 support and other fixes/improvements in crypto code. - Convert to new fallthrough; annotations. - Replace zero-length arrays with flexible-arrays. - QDIO debugfs and other small improvements. - Drop 2-level paging support optimization for compat tasks. Varios mm cleanups. - Remove broken and unused hibernate / power management support. - Remove fake numa support which does not bring any benefits. - Exclude offline CPUs from CPU topology masks to be more consistent with other architectures. - Prevent last branching instruction address leaking to userspace. - Other small various fixes and improvements all over the code. -----BEGIN PGP SIGNATURE----- iQEzBAABCAAdFiEE3QHqV+H2a8xAv27vjYWKoQLXFBgFAl6Ig2YACgkQjYWKoQLX FBj2gggAibnHOl9d0ngX1mVT4nz51R3V8z5sEQjNMr2uHBmaTqs7pi/00gaFMxoC NngVEXvL443jSogQivthGgXPpRCV9xdKE3sp38j7fF4LgHoeuDtGd1oaX4W9Rqk0 7Yii35EaO2e2WHdOKaAbu+ZvDRunFjERyntc51MYaIUivFosogSo07vC73vFIArF VGStS09fJ4Ny76ott896T7Ulx1Iek/MkF1vponEMLGNUIcLIQbbxZxOwgz0pHuEF SlyyJBnhOIaAJGOYlKREQDt1cew+hsxluPU+a01bwdsmdZv9LH1BGwLayDqTH58i QWvtEpzJFmDvo9jGM1v81ebaGnyCKg== =hiGF -----END PGP SIGNATURE----- Merge tag 's390-5.7-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Pull s390 updates from Vasily Gorbik: - Update maintainers. Niklas Schnelle takes over zpci and Vineeth Vijayan common io code. - Extend cpuinfo to include topology information. - Add new extended counters for IBM z15 and sampling buffer allocation rework in perf code. - Add control over zeroing out memory during system restart. - CCA protected key block version 2 support and other fixes/improvements in crypto code. - Convert to new fallthrough; annotations. - Replace zero-length arrays with flexible-arrays. - QDIO debugfs and other small improvements. - Drop 2-level paging support optimization for compat tasks. Varios mm cleanups. - Remove broken and unused hibernate / power management support. - Remove fake numa support which does not bring any benefits. - Exclude offline CPUs from CPU topology masks to be more consistent with other architectures. - Prevent last branching instruction address leaking to userspace. - Other small various fixes and improvements all over the code. * tag 's390-5.7-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (57 commits) s390/mm: cleanup init_new_context() callback s390/mm: cleanup virtual memory constants usage s390/mm: remove page table downgrade support s390/qdio: set qdio_irq->cdev at allocation time s390/qdio: remove unused function declarations s390/ccwgroup: remove pm support s390/ap: remove power management code from ap bus and drivers s390/zcrypt: use kvmalloc instead of kmalloc for 256k alloc s390/mm: cleanup arch_get_unmapped_area() and friends s390/ism: remove pm support s390/cio: use fallthrough; s390/vfio: use fallthrough; s390/zcrypt: use fallthrough; s390: use fallthrough; s390/cpum_sf: Fix wrong page count in error message s390/diag: fix display of diagnose call statistics s390/ap: Remove ap device suspend and resume callbacks s390/pci: Improve handling of unset UID s390/pci: Fix zpci_alloc_domain() over allocation s390/qdio: pass ISC as parameter to chsc_sadc() ... |
||
Linus Torvalds
|
854e80bcfd |
ARM: devicetree updates for v5.7
Most of the commits are for additional hardware support and minor fixes for existing machines for all the usual platforms: qcom, amlogic, at91, gemini, mediatek, ti, socfpga, i.mx, layerscape, uniphier, rockchip, exynos, ux500, mvebu, tegra, stm32, renesas, sunxi, broadcom, omap, and versatile. The conversion of binding files to machine-readable yaml format continues, along with fixes found during the validation. Andre Przywara takes over maintainership for the old Calxeda Highbank platform and provides a number of updates. The OMAP2+ platforms see a continued move from platform data into dts files, for many devices that relied on a mix of auxiliary data in addition to the DT description A moderate number of new SoCs and machines are added, here is a full list: - Two new Qualcomm SoCs with their evaluation boards: Snapdragon 865 (SM8250) is the current high-end phone chip, and IPQ6018 is a new WiFi-6 router chip. - Mediatek MT8516 application processor SoC for voice assistants, along with the "pumpkin" development board - NXP i.MX8M Plus SoC, a variant of the popular i.MX8M, along with an evaluation board. - Kontron "sl28" board family based on NXP LS1028A - Eleven variations of the new i.MX6 TechNexion Pico board, combining the "dwarf", "hobbit", "nymph" and "pi" baseboards with i.MX6/i.MX7 SoM carriers - Three additional variants of the Toradex Colibri board family, all based on versions of the NXP i.MX7. - The Pinebook Pro laptop based on Rockchip RK3399 - Samsung S7710 Galaxy Xcover 2, a 2013 vintage Android phone based on the ST-Ericsson u8500 platform - DH Electronics DHCOM SoM and PDK2 rev. 400 carrier based on STMicroelectronics stm32mp157 - Renesas M3ULCB starter kit for R-Car M3-W+ - Hoperun HiHope development board with Renesas RZ/G2M - Pine64 PineTab tablet and PinePhone phone, both based on Allwinner A64 - Linutronix Testbox v2 for the Lamobo R1 router, based on Allwinner A20 - PocketBook Touch Lux 3 ebook reader, based on Allwinner A13 Signed-off-by: Arnd Bergmann <arnd@arndb.de> -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEo6/YBQwIrVS28WGKmmx57+YAGNkFAl6HpMkACgkQmmx57+YA GNkGsQ/+KRbE74XGQvZww5PleaesqoZZhrt2gbi0pEJZ/JTgNa3dBkT+JwlToe/H x7nFVfMZeEl4O9GO0+/CH2tsmQa5BA8R9JddhFxwnZ48ZYLQAdaukwt94LM2zj3K GFgs47N4DAAF5QJoXNtmmQCXUWbj7A/0S5TTpXe94TYPN9XiJCdsyNNLpW3undTe K1HLnd4yWGforQc/VfRsV/Gsqi1VNHgL34M3belahiG7x0lytJDCHfhsfmIdxdGR n3LVRRJr6NhKcuUw3XtA8MxT4dTAcgHjbbDLkS/b1nHfuXMi0/zW8VPBzD/xyHL7 fbFl8ayUMANB6FD/U7ptUC/0IMXuHDUn4B60CEEzK8ddkEbErrmXlYVGogpFHxvm MqrW8CnO0YEr0YMNAIyZoqHYGq8+8DCq+SRH48brdPzuiKI6OahdV1o07ulGhOjq ihwoZNE+J0NjeaX7C1xBX3DT1XqdcNPCmu3gx6r06u2FVXVm1J19YkIzQnEXQvKy NRIw5LIOfEsxkMSQ0oUuAUUUY1Fq1zuHqD8MmgBd3jqIULQqgfahmPL6Dtwm5QFf R17YsMcQ7ae1Pp7a+D3Jrkbn+s2y8wmJZIqH3eWebps9RvpWmrxzsRfOJ2czhqM1 NY7Z/TGMM7lGM75DZ+xskfk7UCAX+hqMSTiNg9xbRo8946GAbV4= =ye2F -----END PGP SIGNATURE----- Merge tag 'arm-dt-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM devicetree updates from Arnd Bergmann: "Most of the commits are for additional hardware support and minor fixes for existing machines for all the usual platforms: qcom, amlogic, at91, gemini, mediatek, ti, socfpga, i.mx, layerscape, uniphier, rockchip, exynos, ux500, mvebu, tegra, stm32, renesas, sunxi, broadcom, omap, and versatile. The conversion of binding files to machine-readable yaml format continues, along with fixes found during the validation. Andre Przywara takes over maintainership for the old Calxeda Highbank platform and provides a number of updates. The OMAP2+ platforms see a continued move from platform data into dts files, for many devices that relied on a mix of auxiliary data in addition to the DT description A moderate number of new SoCs and machines are added, here is a full list: - Two new Qualcomm SoCs with their evaluation boards: Snapdragon 865 (SM8250) is the current high-end phone chip, and IPQ6018 is a new WiFi-6 router chip. - Mediatek MT8516 application processor SoC for voice assistants, along with the "pumpkin" development board - NXP i.MX8M Plus SoC, a variant of the popular i.MX8M, along with an evaluation board. - Kontron "sl28" board family based on NXP LS1028A - Eleven variations of the new i.MX6 TechNexion Pico board, combining the "dwarf", "hobbit", "nymph" and "pi" baseboards with i.MX6/i.MX7 SoM carriers - Three additional variants of the Toradex Colibri board family, all based on versions of the NXP i.MX7. - The Pinebook Pro laptop based on Rockchip RK3399 - Samsung S7710 Galaxy Xcover 2, a 2013 vintage Android phone based on the ST-Ericsson u8500 platform - DH Electronics DHCOM SoM and PDK2 rev. 400 carrier based on STMicroelectronics stm32mp157 - Renesas M3ULCB starter kit for R-Car M3-W+ - Hoperun HiHope development board with Renesas RZ/G2M - Pine64 PineTab tablet and PinePhone phone, both based on Allwinner A64 - Linutronix Testbox v2 for the Lamobo R1 router, based on Allwinner A20 - PocketBook Touch Lux 3 ebook reader, based on Allwinner A13" * tag 'arm-dt-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (520 commits) ARM: dts: ux500: Fix missing node renames arm64: dts: Revert "specify console via command line" MAINTAINERS: Update Calxeda Highbank maintainership arm: dts: calxeda: Group port-phys and sgpio-gpio items arm: dts: calxeda: Fix interrupt grouping arm: dts: calxeda: Provide UART clock arm: dts: calxeda: Basic DT file fixes arm64: dts: specify console via command line ARM: dts: at91: sama5d27_wlsom1_ek: add USB device node ARM: dts: gemini: Add thermal zone to DIR-685 ARM: dts: gemini: Rename IDE nodes ARM: socfpga: arria10: Add ptp_ref clock to ethernet nodes arm64: dts: ti: k3-j721e-mcu: add scm node and phy-gmii-sel nodes arm64: dts: ti: k3-am65-mcu: add phy-gmii-sel node arm64: dts: ti: k3-am65-mcu: Add DMA entries for ADC arm64: dts: ti: k3-am65-main: Add DMA entries for main_spi0 arm64: dts: ti: k3-j721e-mcu-wakeup: Add DMA entries for ADC arm64: dts: ti: k3-am65: Add clocks to dwc3 nodes arm64: dts: meson-g12b-odroid-n2: add SPIFC controller node arm64: dts: khadas-vim3: add SPIFC controller node ... |
||
Linus Torvalds
|
86f26a77cb |
pci-v5.7-changes
-----BEGIN PGP SIGNATURE----- iQJIBAABCgAyFiEEgMe7l+5h9hnxdsnuWYigwDrT+vwFAl6GTQMUHGJoZWxnYWFz QGdvb2dsZS5jb20ACgkQWYigwDrT+vy3PhAAmqpYBRobOsG8QbmKDjoJEFtkqdvD z6+4zf/R+hF11RyXjMDwihIe8d+tkQ4eAaYu6Oh5PrTyanz0G0PgeCrivZeytULk thqQIWzDQMVA5vN/2/Vy8s5s+3HzP8z/MZOFScJ7+xA1MndXptPRTNmFUbjx+GAv x8/pTp0u9AF6m7itX65DxXvwkzjWamt+Ar4Yx2IcuKAU/M5RtfuZO3PpDnqn7/wk JFlkRoYeFB6qNnnkPdeyPHl9dALhuhzgdTyklQEnKVW3nf3xThYDhcEwdh6kBQgl 0dH8lL5LXy7PKGN8RES4wB0Vqndw/HlsCF5O4wkkfItbnbJxGJtS139e5973m0ud sgWvF4yJAT2jCKhIeNz34sePQJMyWALhv0XzZCsJ0YeGHsrV1jrHELkwUT1+eIsT 3UV0iZ6aL06zQJDyKUbbIcQzEQ/wwBC+x9VgsyL54K1quCQZ1N1Nl/dvrb4cRG9m m9EhJK/brDf4c0uFlOmMTSxV1t5J+z6ZSQnh1ShD/o5yBsxqN6q5brDT6LEs+jbM LsIkA18jJOd4OyiDs98YiFKvIfFQbQ0LEBQpJwhF0snvfBFMMbUYN/T/NYneWON/ F0TpkFoP7PXDuq55iNaLdnObfzrpC9kdzUyWvePUvjxIl55bkf+/qtUny+H48t4L dNggvW052d7BHes= =deWu -----END PGP SIGNATURE----- Merge tag 'pci-v5.7-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull pci updates from Bjorn Helgaas: "Enumeration: - Revert sysfs "rescan" renames that broke apps (Kelsey Skunberg) - Add more 32 GT/s link speed decoding and improve the implementation (Yicong Yang) Resource management: - Add support for sizing programmable host bridge apertures and fix a related alpha Nautilus regression (Ivan Kokshaysky) Interrupts: - Add boot interrupt quirk mechanism for Xeon chipsets and document boot interrupts (Sean V Kelley) PCIe native device hotplug: - When possible, disable in-band presence detect and use PDS (Alexandru Gagniuc) - Add DMI table for devices that don't use in-band presence detection but don't advertise that correctly (Stuart Hayes) - Fix hang when powering slots up/down via sysfs (Lukas Wunner) - Fix an MSI interrupt race (Stuart Hayes) Virtualization: - Add ACS quirks for Zhaoxin devices (Raymond Pang) Error handling: - Add Error Disconnect Recover (EDR) support so firmware can report devices disconnected via DPC and we can try to recover (Kuppuswamy Sathyanarayanan) Peer-to-peer DMA: - Add Intel Sky Lake-E Root Ports B, C, D to the whitelist (Andrew Maier) ASPM: - Reduce severity of common clock config message (Chris Packham) - Clear the correct bits when enabling L1 substates, so we don't go to the wrong state (Yicong Yang) Endpoint framework: - Replace EPF linkup ops with notifier call chain and improve locking (Kishon Vijay Abraham I) - Fix concurrent memory allocation in OB address region (Kishon Vijay Abraham I) - Move PF function number assignment to EPC core to support multiple function creation methods (Kishon Vijay Abraham I) - Fix issue with clearing configfs "start" entry (Kunihiko Hayashi) - Fix issue with endpoint MSI-X ignoring BAR Indicator and Table Offset (Kishon Vijay Abraham I) - Add support for testing DMA transfers (Kishon Vijay Abraham I) - Add support for testing > 10 endpoint devices (Kishon Vijay Abraham I) - Add support for tests to clear IRQ (Kishon Vijay Abraham I) - Add common DT schema for endpoint controllers (Kishon Vijay Abraham I) Amlogic Meson PCIe controller driver: - Add DT bindings for AXG PCIe PHY, shared MIPI/PCIe analog PHY (Remi Pommarel) - Add Amlogic AXG PCIe PHY, AXG MIPI/PCIe analog PHY drivers (Remi Pommarel) Cadence PCIe controller driver: - Add Root Complex/Endpoint DT schema for Cadence PCIe (Kishon Vijay Abraham I) Intel VMD host bridge driver: - Add two VMD Device IDs that require bus restriction mode (Sushma Kalakota) Mobiveil PCIe controller driver: - Refactor and modularize mobiveil driver (Hou Zhiqiang) - Add support for Mobiveil GPEX Gen4 host (Hou Zhiqiang) Microsoft Hyper-V host bridge driver: - Add support for Hyper-V PCI protocol version 1.3 and PCI_BUS_RELATIONS2 (Long Li) - Refactor to prepare for virtual PCI on non-x86 architectures (Boqun Feng) - Fix memory leak in hv_pci_probe()'s error path (Dexuan Cui) NVIDIA Tegra PCIe controller driver: - Use pci_parse_request_of_pci_ranges() (Rob Herring) - Add support for endpoint mode and related DT updates (Vidya Sagar) - Reduce -EPROBE_DEFER error message log level (Thierry Reding) Qualcomm PCIe controller driver: - Restrict class fixup to specific Qualcomm devices (Bjorn Andersson) Synopsys DesignWare PCIe controller driver: - Refactor core initialization code for endpoint mode (Vidya Sagar) - Fix endpoint MSI-X to use correct table address (Kishon Vijay Abraham I) TI DRA7xx PCIe controller driver: - Fix MSI IRQ handling (Vignesh Raghavendra) TI Keystone PCIe controller driver: - Allow AM654 endpoint to raise MSI-X interrupt (Kishon Vijay Abraham I) Miscellaneous: - Quirk ASMedia XHCI USB to avoid "PME# from D0" defect (Kai-Heng Feng) - Use ioremap(), not phys_to_virt(), for platform ROM to fix video ROM mapping with CONFIG_HIGHMEM (Mikel Rychliski)" * tag 'pci-v5.7-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (96 commits) misc: pci_endpoint_test: remove duplicate macro PCI_ENDPOINT_TEST_STATUS PCI: tegra: Print -EPROBE_DEFER error message at debug level misc: pci_endpoint_test: Use full pci-endpoint-test name in request_irq() misc: pci_endpoint_test: Fix to support > 10 pci-endpoint-test devices tools: PCI: Add 'e' to clear IRQ misc: pci_endpoint_test: Add ioctl to clear IRQ misc: pci_endpoint_test: Avoid using module parameter to determine irqtype PCI: keystone: Allow AM654 PCIe Endpoint to raise MSI-X interrupt PCI: dwc: Fix dw_pcie_ep_raise_msix_irq() to get correct MSI-X table address PCI: endpoint: Fix ->set_msix() to take BIR and offset as arguments misc: pci_endpoint_test: Add support to get DMA option from userspace tools: PCI: Add 'd' command line option to support DMA misc: pci_endpoint_test: Use streaming DMA APIs for buffer allocation PCI: endpoint: functions/pci-epf-test: Print throughput information PCI: endpoint: functions/pci-epf-test: Add DMA support to transfer data PCI: pciehp: Fix MSI interrupt race PCI: pciehp: Fix indefinite wait on sysfs requests PCI: endpoint: Fix clearing start entry in configfs PCI: tegra: Add support for PCIe endpoint mode in Tegra194 PCI: sysfs: Revert "rescan" file renames ... |
||
Linus Torvalds
|
0ad5b053d4 |
Char/Misc driver patches for 5.7-rc1
Here is the big set of char/misc/other driver patches for 5.7-rc1. Lots of things in here, and it's later than expected due to some reverts to resolve some reported issues. All is now clean with no reported problems in linux-next. Included in here is: - interconnect updates - mei driver updates - uio updates - nvmem driver updates - soundwire updates - binderfs updates - coresight updates - habanalabs updates - mhi new bus type and core - extcon driver updates - some Kconfig cleanups - other small misc driver cleanups and updates As mentioned, all have been in linux-next for a while, and with the last two reverts, all is calm and good. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> -----BEGIN PGP SIGNATURE----- iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCXodfvA8cZ3JlZ0Brcm9h aC5jb20ACgkQMUfUDdst+ynzCQCfROhar3E8EhYEqSOP6xq6uhX9uegAnRgGY2rs rN4JJpOcTddvZcVlD+vo =ocWk -----END PGP SIGNATURE----- Merge tag 'char-misc-5.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc driver updates from Greg KH: "Here is the big set of char/misc/other driver patches for 5.7-rc1. Lots of things in here, and it's later than expected due to some reverts to resolve some reported issues. All is now clean with no reported problems in linux-next. Included in here is: - interconnect updates - mei driver updates - uio updates - nvmem driver updates - soundwire updates - binderfs updates - coresight updates - habanalabs updates - mhi new bus type and core - extcon driver updates - some Kconfig cleanups - other small misc driver cleanups and updates As mentioned, all have been in linux-next for a while, and with the last two reverts, all is calm and good" * tag 'char-misc-5.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (174 commits) Revert "driver core: platform: Initialize dma_parms for platform devices" Revert "amba: Initialize dma_parms for amba devices" amba: Initialize dma_parms for amba devices driver core: platform: Initialize dma_parms for platform devices bus: mhi: core: Drop the references to mhi_dev in mhi_destroy_device() bus: mhi: core: Initialize bhie field in mhi_cntrl for RDDM capture bus: mhi: core: Add support for reading MHI info from device misc: rtsx: set correct pcr_ops for rts522A speakup: misc: Use dynamic minor numbers for speakup devices mei: me: add cedar fork device ids coresight: do not use the BIT() macro in the UAPI header Documentation: provide IBM contacts for embargoed hardware nvmem: core: remove nvmem_sysfs_get_groups() nvmem: core: use is_bin_visible for permissions nvmem: core: use device_register and device_unregister nvmem: core: add root_only member to nvmem device struct extcon: axp288: Add wakeup support extcon: Mark extcon_get_edev_name() function as exported symbol extcon: palmas: Hide error messages if gpio returns -EPROBE_DEFER dt-bindings: extcon: usbc-cros-ec: convert extcon-usbc-cros-ec.txt to yaml format ... |
||
Linus Torvalds
|
bef7b2a7be |
Devicetree updates for v5.7:
- Unit test for overlays with GPIO hogs - Improve dma-ranges parsing to handle dma-ranges with multiple entries - Update dtc to upstream version v1.6.0-2-g87a656ae5ff9 - Improve overlay error reporting - Device link support for power-domains and hwlocks bindings - Add vendor prefixes for Beacon, Topwise, ENE, Dell, SG Micro, Elida, PocketBook, Xiaomi, Linutronix, OzzMaker, Waveshare Electronics, and ITE Tech - Add deprecated Marvell vendor prefix 'mrvl' - A bunch of binding conversions to DT schema continues. Of note, the common serial and USB connector bindings are converted. - Add more Arm CPU compatibles - Drop Mark Rutland as DT maintainer :( -----BEGIN PGP SIGNATURE----- iQJEBAABCgAuFiEEktVUI4SxYhzZyEuo+vtdtY28YcMFAl6GTJUQHHJvYmhAa2Vy bmVsLm9yZwAKCRD6+121jbxhw8vaD/9HDT0EEDRdfr8s5OiLHYQMSXlSExJgR+ON iLI4v19apWwyycil176RXuWL5fFxh9HHOKbxOL27mmfqSLdv/xe/ev6Z4oNLVZzm YiUalm37K+R9yWsWTqxJKtQxWqSBBtOlyJmUYnvxI1bjfF4PANKF+IMpQVDflj1w 9UMixoPRFdlOoMXVmC7yT0sfE1B6REJIh0Qfa4pqDwnHRhs8imgoIYA+JwFnmFPr k5Q8xS2YCwopH/7W5aRLzyEI2dF6Rfy9FID8jfyNoKZLtBW6cIEkA4zTv41BZSuj 4Zj2etELXAnkIWMZXXdeKSz8IoSOlgjsCR482QmzTRuoFdmVLoJgsgh9hO2+oK07 vJDEVJnXKxq1pF6DVbYwuzNgPB1pRzg6Y8EitdH3SBgjsOQ/m4RpKaqN0MkQhYrB BI9PCiF7GKCzNfNl3b/Op+HSsZ6aJkOsQPzC89/Ww0mB8azypgAwvLsjte5R3hib fS8z+V+lxAAC0/M981TsPKJ96HNv4VXbLI3bY9qJBd2LB+NDortsF/OkUuObsh+6 hVQCWnae5V5iq8WmMTFABfBAK5lHafop87edn6X33LOyZZQCT9svNz/zrpakXh0e /SBGTUudtjCOy/BLj1VQrb6tczEzos7Ij+bszeIBAcSzrWg8gtVPjw9TvuAo2b/b 9nwR4yrm0Q== =db/l -----END PGP SIGNATURE----- Merge tag 'devicetree-for-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux Pull devicetree updates from Rob Herring: - Unit test for overlays with GPIO hogs - Improve dma-ranges parsing to handle dma-ranges with multiple entries - Update dtc to upstream version v1.6.0-2-g87a656ae5ff9 - Improve overlay error reporting - Device link support for power-domains and hwlocks bindings - Add vendor prefixes for Beacon, Topwise, ENE, Dell, SG Micro, Elida, PocketBook, Xiaomi, Linutronix, OzzMaker, Waveshare Electronics, and ITE Tech - Add deprecated Marvell vendor prefix 'mrvl' - A bunch of binding conversions to DT schema continues. Of note, the common serial and USB connector bindings are converted. - Add more Arm CPU compatibles - Drop Mark Rutland as DT maintainer :( * tag 'devicetree-for-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (106 commits) MAINTAINERS: drop an old reference to stm32 pwm timers doc MAINTAINERS: dt: update etnaviv file reference dt-bindings: usb: dwc2: fix bindings for amlogic, meson-gxbb-usb dt-bindings: uniphier-system-bus: fix warning in the example dt-bindings: display: meson-vpu: fix indentation of reg-names' "items" dt-bindings: iio: Fix adi, ltc2983 uint64-matrix schema constraints dt-bindings: power: Fix example for power-domain dt-bindings: arm: Add some constraints for PSCI nodes of: some unittest overlays not untracked of: gpio unittest kfree() wrong object dt-bindings: phy: convert phy-rockchip-inno-usb2 bindings to yaml dt-bindings: serial: sh-sci: Convert to json-schema dt-bindings: serial: Document serialN aliases dt-bindings: thermal: tsens: Set 'additionalProperties: false' dt-bindings: thermal: tsens: Fix nvmem-cell-names schema dt-bindings: vendor-prefixes: Add Beacon vendor prefix dt-bindings: vendor-prefixes: Add Topwise of: of_private.h: Replace zero-length array with flexible-array member docs: dt: fix a broken reference to input.yaml docs: dt: fix references to ap806-system-controller.txt ... |
||
Linus Torvalds
|
79f51b7b9c |
SCSI misc on 20200402
update changing all our txt files to rst ones. Excluding that, we have the usual driver updates (qla2xxx, ufs, lpfc, zfcp, ibmvfc, pm80xx, aacraid), a treewide update for scnprintf and some other minor updates. The major core update is Hannes moving functions out of the aacraid driver and into the core. Signed-off-by: James E.J. Bottomley <jejb@linux.ibm.com> -----BEGIN PGP SIGNATURE----- iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCXoYKiyYcamFtZXMuYm90 dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishSasAP4iGwSB Y8tFaZgWadu76+wj5MdqTBoXdhnIuFF0rZG3pQEAiIKdsfQlbSFdm75+gUtx5hG/ GOilX/pJczTRJDCGNis= =g7Sk -----END PGP SIGNATURE----- Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Pull SCSI updates from James Bottomley: "This series has a huge amount of churn because it pulls in Mauro's doc update changing all our txt files to rst ones. Excluding that, we have the usual driver updates (qla2xxx, ufs, lpfc, zfcp, ibmvfc, pm80xx, aacraid), a treewide update for scnprintf and some other minor updates. The major core change is Hannes moving functions out of the aacraid driver and into the core" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (223 commits) scsi: aic7xxx: aic97xx: Remove FreeBSD-specific code scsi: ufs: Do not rely on prefetched data scsi: dc395x: remove dc395x_bios_param scsi: libiscsi: Fix error count for active session scsi: hpsa: correct race condition in offload enabled scsi: message: fusion: Replace zero-length array with flexible-array member scsi: qedi: Add PCI shutdown handler support scsi: qedi: Add MFW error recovery process scsi: ufs: Enable block layer runtime PM for well-known logical units scsi: ufs-qcom: Override devfreq parameters scsi: ufshcd: Let vendor override devfreq parameters scsi: ufshcd: Update the set frequency to devfreq scsi: ufs: Resume ufs host before accessing ufs device scsi: ufs-mediatek: customize the delay for enabling host scsi: ufs: make HCE polling more compact to improve initialization latency scsi: ufs: allow custom delay prior to host enabling scsi: ufs-mediatek: use common delay function scsi: ufs: introduce common and flexible delay function scsi: ufs: use an enum for host capabilities scsi: ufs: fix uninitialized tx_lanes in ufshcd_disable_tx_lcc() ... |
||
Linus Torvalds
|
e109f50607 |
MTD core changes:
* Fix issue where write_cached_data() fails but write() still returns success * maps: sa1100-flash: Replace zero-length array with flexible-array member * phram: Fix a double free issue in error path * Convert fallthrough comments into statements * MAINTAINERS: Add the IRC channel to the MTD related subsystems Raw NAND core changes: * Add support for manufacturer specific suspend/resume operation * Add support for manufacturer specific lock/unlock operation * Replace zero-length array with flexible-array member * Fix a typo ("manufecturer") * Ensure nand_soft_waitrdy wait period is enough Raw NAND controller driver changes: * Brcmnand: - Add support for flash-edu for dma transfers (+ bindings) * Cadence: - Reinit completion before executing a new command - Change bad block marker size - Fix the calculation of the avaialble OOB size - Get meta data size from registers * Qualcom: - Use dma_request_chan() instead dma_request_slave_channel() - Release resources on failure within qcom_nandc_alloc() * Allwinner: - Use dma_request_chan() instead dma_request_slave_channel() * Marvell: - Use dma_request_chan() instead dma_request_slave_channel() - Release DMA channel on error * Freescale: - Use dma_request_chan() instead dma_request_slave_channel() * Macronix: - Add support for Macronix NAND randomizer (+ bindings) * Ams-delta: - Rename structures and functions to gpio_nand* - Make the driver custom I/O ready - Drop useless local variable - Support custom driver initialisation - Add module device tables - Handle more GPIO pins as optional - Make read pulses optional - Don't hardcode read/write pulse widths - Push inversion handling to gpiolib - Enable OF partition info support - Drop board specific partition info - Use struct gpio_nand_platdata - Write protect device during probe * Ingenic: - Use devm_platform_ioremap_resource() - Add dependency on MIPS || COMPILE_TEST * Denali: - Deassert write protect pin * ST: - Use dma_request_chan() instead dma_request_slave_channel() Raw NAND chip driver changes: * Toshiba: - Support reading the number of bitflips for BENAND (Built-in ECC NAND) * Macronix: - Add support for deep power down mode - Add support for block protection SPI-NAND core changes: * Do not erase the block before writing a bad block marker * Explicitly use MTD_OPS_RAW to write the bad block marker to OOB * Stop using spinand->oobbuf for buffering bad block markers * Rework detect procedure for different READ_ID operation SPI-NAND driver changes: * Toshiba: - Support for new Kioxia Serial NAND - Rename function name to change suffix and prefix (8Gbit) - Add comment about Kioxia ID * Micron: - Add new Micron SPI NAND devices with multiple dies - Add M70A series Micron SPI NAND devices - identify SPI NAND device with Continuous Read mode - Add new Micron SPI NAND devices - Describe the SPI NAND device MT29F2G01ABAGD - Generalize the OOB layout structure and function names SPI NOR core changes: * Move all the manufacturer specific quirks/code out of the core, to make the core logic more readable and thus ease maintenance. * Move the SFDP logic out of the core, it provides a better separation between the SFDP parsing and core logic. * Trim what is exposed in spi-nor.h. The SPI NOR controllers drivers must not be able to use structures that are meant just for the SPI NOR core. * Use the spi-mem direct mapping API to let advanced controllers optimize the read/write operations when they support direct mapping. * Add generic formula for the Status Register block protection handling. It fixes some long standing locking limitations and eases the addition of the 4bit block protection support. * Add block protection support for flashes with 4 block protection bits in the Status Register. SPI NOR controller drivers changes: * The mtk-quadspi driver is replaced by the new spi-mem spi-mtk-nor driver. * Merge tag 'mtk-mtd-spi-move' into spi-nor/next to avoid conflicts. HyperBus changes: * Print error msg when compatible is wrong or missing * Move mapping of direct access window from core to individual drivers -----BEGIN PGP SIGNATURE----- iQEzBAABCgAdFiEE9HuaYnbmDhq/XIDIJWrqGEe9VoQFAl6GEU8ACgkQJWrqGEe9 VoSQ8gf/WV1vfxfAlgKRQ6WGkdrI+EndmciKx/sqf9KfAu6uNLHx3qcxQeibqvgC KmIgJbCLXhgCUBZQLqyjqHtO3zImgPI2WWWR/tkieNaT9NT5jrAunYZpiqkCkjVD HjML4iVcLwDJoHPZWTTTsFWd2cDLA8nFVXJQeaGRgdsx3j3D9OSOnfLGTUGfcg2H lC0BxA6JRO7tdZlErqzy9BXUasjO5C7rsRzqgTiGT4h/H2yhYmDQhMW+Kz86zWiB XdZsZJ2qLlTKntQmzR+30vbolId3iZqsO9q0mVkqWd2UQn5TpmmzNqLoYA6ys8KK lW/1E53E3/Pq0+5ejGbD5m4afff+nw== =/p2x -----END PGP SIGNATURE----- Merge tag 'mtd/for-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux Pull MTD updates from Miquel Raynal: "MTD core changes: - Fix issue where write_cached_data() fails but write() still returns success - maps: sa1100-flash: Replace zero-length array with flexible-array member - phram: Fix a double free issue in error path - Convert fallthrough comments into statements - MAINTAINERS: Add the IRC channel to the MTD related subsystems Raw NAND core changes: - Add support for manufacturer specific suspend/resume operation - Add support for manufacturer specific lock/unlock operation - Replace zero-length array with flexible-array member - Fix a typo ("manufecturer") - Ensure nand_soft_waitrdy wait period is enough Raw NAND controller driver changes: - Brcmnand: * Add support for flash-edu for dma transfers (+ bindings) - Cadence: * Reinit completion before executing a new command * Change bad block marker size * Fix the calculation of the avaialble OOB size * Get meta data size from registers - Qualcom: * Use dma_request_chan() instead dma_request_slave_channel() * Release resources on failure within qcom_nandc_alloc() - Allwinner: * Use dma_request_chan() instead dma_request_slave_channel() - Marvell: * Use dma_request_chan() instead dma_request_slave_channel() * Release DMA channel on error - Freescale: * Use dma_request_chan() instead dma_request_slave_channel() - Macronix: * Add support for Macronix NAND randomizer (+ bindings) - Ams-delta: * Rename structures and functions to gpio_nand* * Make the driver custom I/O ready * Drop useless local variable * Support custom driver initialisation * Add module device tables * Handle more GPIO pins as optional * Make read pulses optional * Don't hardcode read/write pulse widths * Push inversion handling to gpiolib * Enable OF partition info support * Drop board specific partition info * Use struct gpio_nand_platdata * Write protect device during probe - Ingenic: * Use devm_platform_ioremap_resource() * Add dependency on MIPS || COMPILE_TEST - Denali: * Deassert write protect pin - ST: * Use dma_request_chan() instead dma_request_slave_channel() Raw NAND chip driver changes: - Toshiba: * Support reading the number of bitflips for BENAND (Built-in ECC NAND) - Macronix: * Add support for deep power down mode * Add support for block protection SPI-NAND core changes: - Do not erase the block before writing a bad block marker - Explicitly use MTD_OPS_RAW to write the bad block marker to OOB - Stop using spinand->oobbuf for buffering bad block markers - Rework detect procedure for different READ_ID operation SPI-NAND driver changes: - Toshiba: * Support for new Kioxia Serial NAND * Rename function name to change suffix and prefix (8Gbit) * Add comment about Kioxia ID - Micron: * Add new Micron SPI NAND devices with multiple dies * Add M70A series Micron SPI NAND devices * identify SPI NAND device with Continuous Read mode * Add new Micron SPI NAND devices * Describe the SPI NAND device MT29F2G01ABAGD * Generalize the OOB layout structure and function names SPI NOR core changes: - Move all the manufacturer specific quirks/code out of the core, to make the core logic more readable and thus ease maintenance. - Move the SFDP logic out of the core, it provides a better separation between the SFDP parsing and core logic. - Trim what is exposed in spi-nor.h. The SPI NOR controllers drivers must not be able to use structures that are meant just for the SPI NOR core. - Use the spi-mem direct mapping API to let advanced controllers optimize the read/write operations when they support direct mapping. - Add generic formula for the Status Register block protection handling. It fixes some long standing locking limitations and eases the addition of the 4bit block protection support. - Add block protection support for flashes with 4 block protection bits in the Status Register. SPI NOR controller drivers changes: - The mtk-quadspi driver is replaced by the new spi-mem spi-mtk-nor driver. - Merge tag 'mtk-mtd-spi-move' into spi-nor/next to avoid conflicts. HyperBus changes: - Print error msg when compatible is wrong or missing - Move mapping of direct access window from core to individual drivers" * tag 'mtd/for-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux: (103 commits) mtd: Convert fallthrough comments into statements mtd: rawnand: toshiba: Support reading the number of bitflips for BENAND (Built-in ECC NAND) MAINTAINERS: Add the IRC channel to the MTD related subsystems mtd: Fix issue where write_cached_data() fails but write() still returns success mtd: maps: sa1100-flash: Replace zero-length array with flexible-array member mtd: phram: fix a double free issue in error path mtd: spinand: toshiba: Support for new Kioxia Serial NAND mtd: spinand: toshiba: Rename function name to change suffix and prefix (8Gbit) mtd: rawnand: macronix: Add support for deep power down mode mtd: rawnand: Add support for manufacturer specific suspend/resume operation mtd: spi-nor: Enable locking for n25q512ax3/n25q512a mtd: spi-nor: Add SR 4bit block protection support mtd: spi-nor: Add generic formula for SR block protection handling mtd: spi-nor: Set all BP bits to one when lock_len == mtd->size mtd: spi-nor: controllers: aspeed-smc: Replace zero-length array with flexible-array member mtd: spi-nor: Clear WEL bit when erase or program errors occur MAINTAINERS: update entry after SPI NOR controller move mtd: spi-nor: Trim what is exposed in spi-nor.h mtd: spi-nor: Drop the MFR definitions mtd: spi-nor: Get rid of the now empty spi_nor_ids[] table ... |
||
Linus Torvalds
|
5c8db3eb38 |
Merge branch 'i2c/for-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c updates from Wolfram Sang: "I2C has: - using defines for bus speeds to avoid mistakes in hardcoded values; lots of small driver updates because of that. Thanks, Andy! - API change: i2c_setup_smbus_alert() was renamed to i2c_new_smbus_alert_device() and returns ERRPTR now. All in-tree users have been converted - in the core, a rare race condition when deleting the cdev has been fixed. Thanks, Kevin! - lots of driver updates. Thanks, everyone! I also want to mention: The amount of review and testing tags given was quite high this time. Thank you to these people, too. I hope we can keep it like this!" * 'i2c/for-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (34 commits) i2c: rcar: clean up after refactoring i2c_timings macintosh: convert to i2c_new_scanned_device i2c: drivers: Use generic definitions for bus frequencies i2c: algo: Use generic definitions for bus frequencies i2c: stm32f7: switch to I²C generic property parsing i2c: rcar: Consolidate timings calls in rcar_i2c_clock_calculate() i2c: core: Allow override timing properties with 0 i2c: core: Provide generic definitions for bus frequencies i2c: mxs: Use dma_request_chan() instead dma_request_slave_channel() i2c: imx: remove duplicate print after platform_get_irq() i2c: designware: Fix spelling typos in the comments i2c: designware: Discard i2c_dw_read_comp_param() function i2c: designware: Detect the FIFO size in the common code i2c: dev: Fix the race between the release of i2c_dev and cdev i2c: qcom-geni: Drop of_platform.h include i2c: qcom-geni: Grow a dev pointer to simplify code i2c: qcom-geni: Let firmware specify irq trigger flags i2c: stm32f7: do not backup read-only PECR register i2c: smbus: remove outdated references to irq level triggers i2c: convert SMBus alert setup function to return an ERRPTR ... |
||
Linus Torvalds
|
848960e576 |
sound updates for 5.7-rc1
This became again a busy development cycle. There are a few ALSA core updates (merely API cleanups and sparse fixes), while majority of other changes are found in ASoC scene. Here are some highlights: * ALSA core: - More helper macros for sparse warning fixes (e.g. bitwise types) - Slight optimization of PCM OSS locks - Make common handling for PCM / compress buffers (for SOF) * ASoC: - Lots of code refactoring and modernization for (still ongoing) componentization works - Conversion of SND_SOC_ALL_CODECS to use imply - Continued refactoring and fixing of the Intel SOF/SST support, including the initial (but still incomplete) SoundWire support - SoundWire and more advanced clocking support for Realtek RT5682 - Support for amlogic GX, Meson 8, Meson 8B and T9015 DAC, Broadcom DSL/PON, Ingenic JZ4760 and JZ4770, Realtek RL6231, and TI TAS2563 and TLV320ADCX140 * HD-audio: - Optimizations in HDMI jack handling - A few new quirks and fixups for Realtek codecs * USB-audio: - Delayed registration support - New quirks for Motu, Kingston, Presonus -----BEGIN PGP SIGNATURE----- iQJCBAABCAAsFiEEIXTw5fNLNI7mMiVaLtJE4w1nLE8FAl6Fr0oOHHRpd2FpQHN1 c2UuZGUACgkQLtJE4w1nLE+MFA//XZD6a6sVDCp1JvcT4yLn+xcpXPgT/HC/pUJb fH4T629gGUG2OGmEQXWf86c8UkrKjNsdkK5ZNjg6PlYagGZEO5RlQA35EV0/6QTK hQuRu8ALuVUnQBrB+knQRnlfa8hzXIaXWkriNi0s6V04iAlLJB1XqZ8/ckq3kWs2 UqQ7vkTRODRAivdH0a4KcN2hENSvPfBkNTjhTn+Gp86FC3PIGbN6XqcZWM0rpXQ7 qi9H9jVbavRCpHTPiV5DSZ6JyqqL/pT3LQ4GZIAf+i+frMGTIurB/7VUVIIuCFGT hf1MRrEFo47ox+7RyhJpgPPJxHhNdY+z7uUQDc/hoN1tDlLhGeS2Wjmy3soLZ172 yVbun2z6jfVgm5lyHMqDnY71nCUVAgSWZwFbBtKMroLkw06X3P8ahTmad7Pnnut0 XbrYt29aKOkuf+ejeMaUAtuyW0nKUg68DqlX8wP1RvO1bvY4kGrEkVj3K3ktNZEr GeZFLDDSMumxxXduX8vv/O5Z6MOGhq/toGjnYwnIOyzKR8uLEbUI4DIptUMoelgK b7zIMbLjeoZ4ckeUKNdbmEuhbrWZ3oM6owKCPt4D9EBunK9nu//cq2nsfGuJGBbT Swa+POYH89Au/22pYS0q3/fMAbEHctove/hvFiWoMRa3fNA2My2rMWwyaIAeW1Gl CAwOXk8= =fAMQ -----END PGP SIGNATURE----- Merge tag 'sound-5.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound updates from Takashi Iwai: "This became again a busy development cycle. There are few ALSA core updates (merely API cleanups and sparse fixes), with the majority of other changes are found in ASoC scene. Here are some highlights: ALSA core: - More helper macros for sparse warning fixes (e.g. bitwise types) - Slight optimization of PCM OSS locks - Make common handling for PCM / compress buffers (for SOF) ASoC: - Lots of code refactoring and modernization for (still ongoing) componentization works - Conversion of SND_SOC_ALL_CODECS to use imply - Continued refactoring and fixing of the Intel SOF/SST support, including the initial (but still incomplete) SoundWire support - SoundWire and more advanced clocking support for Realtek RT5682 - Support for amlogic GX, Meson 8, Meson 8B and T9015 DAC, Broadcom DSL/PON, Ingenic JZ4760 and JZ4770, Realtek RL6231, and TI TAS2563 and TLV320ADCX140 HD-audio: - Optimizations in HDMI jack handling - A few new quirks and fixups for Realtek codecs USB-audio: - Delayed registration support - New quirks for Motu, Kingston, Presonus" * tag 'sound-5.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (415 commits) ALSA: usb-audio: Fix case when USB MIDI interface has more than one extra endpoint descriptor Revert "ALSA: uapi: Drop asound.h inclusion from asoc.h" ALSA: hda/realtek - Remove now-unnecessary XPS 13 headphone noise fixups ALSA: hda/realtek - Set principled PC Beep configuration for ALC256 ALSA: doc: Document PC Beep Hidden Register on Realtek ALC256 ALSA: hda/realtek - a fake key event is triggered by running shutup ALSA: hda: default enable CA0132 DSP support ASoC: amd: acp3x-pcm-dma: clean up two indentation issues ASoC: tlv320adcx140: Remove undocumented property ASoC: Intel: sof_sdw: Add Volteer support with RT5682 SNDW helper function ASoC: Intel: common: add match table for TGL RT5682 SoundWire driver ASoC: Intel: boards: add sof_sdw machine driver ASoC: Intel: soc-acpi: update topology and driver name for SoundWire platforms ASoC: rt5682: move DAI clock registry to I2S mode ASoC: pxa: magician: convert to use i2c_new_client_device() ASoC: SOF: Intel: hda-ctrl: add reset cycle before parsing capabilities Asoc: SOF: Intel: hda: check SoundWire wakeen interrupt in irq thread ASoC: SOF: Intel: hda: add WAKEEN interrupt support for SoundWire ASoC: SOF: Intel: hda: add parameter to control SoundWire clock stop quirks ASoC: SOF: Intel: hda: merge IPC, stream and SoundWire interrupt handlers ... |
||
Linus Torvalds
|
bc3b3f4bfb |
This is the bulk of pin control changes for the v5.7 kernel cycle.
There are no core changes this time, only driver developments. - New driver for the Dialog Semiconductor DA9062 Power Management Integrated Circuit (PMIC). - Renesas SH-PFC has improved consistency, with group and register checks in the configuration checker. - New subdriver for the Qualcomm IPQ6018. - Add the RGMII pin control functionality to Qualcomm IPQ8064. - Performance and code quality cleanups in the Mediatek driver. - Improve the Broadcom BCM2835 support to cover all the GPIOs that exist in it. - The Allwinner/Sunxi driver properly masks non-wakeup IRQs on suspend. - Add some missing groups and functions to the Ingenic driver. - Convert some of the Freescale device tree bindings to use the new and all improved JSON YAML markup. - Refactorings and support for the SFIO/GPIO in the Tegra194 SoC driver. - Support high impedance mode in the Spreadtrum/Unisoc driver. -----BEGIN PGP SIGNATURE----- iQIzBAABCAAdFiEElDRnuGcz/wPCXQWMQRCzN7AZXXMFAl6FlRoACgkQQRCzN7AZ XXPiAxAAuAvY07H739YF4ANvtLpfbtz0KBK4M2XGiD41VMcp5MhZtT9TdXAIRisb W4QMHbMxhwO4gdxmhVOetXeQNQnHch4oPsFyd1UdyuwNEtvlm8qst99VcdQPz7Jv zyL4cat1fTrwdcnLQl5eaJR7a9bKLqAd4rlb/suQZsaVf+URUWJyZBuU41GEx9A+ w+EPv8doxTWRaE0NpafIwNCLxTR3i2Vt59fkRT4pSi8fTu9/Zv5yW8yWvbYZdlaO 2bUaFjN65oyiikjPTgyQxb95A8yDJHkNnkgfTw4ghCY/k8u3GvMfKS7V1tO+nq6B bkv9E3jR1u7Ktkq1rLshS2eycl02uSJ3OmzyfL8S/GQxVdUPi3+X3hmyv2ctbEvC qy+7F6zx/Pt/WdPnAisdsVai9T3/YGoSN1C3n7Ufltjcrt0w5xP7/AgEVR4nHHMP NMWNoauGWsBDKtYPG7beX3thjkm3mUpezcEOxho7+r5tOtBaU623pWr+NHEPZu48 8oKOCILaUkacUmmMjjOzraAeOxV7Ut+xumu0mgMj0EjZfJZDrgQsqkmfMbGcU5Fa y4S5+tAd+cELXveLVJB3Ml9u1R037x8VtAv+Z2a7qVnf1gSgf0bpAJ+SnfC/XbLX fBpSCsIMXSpioVNuS9gbkpnfsRPcTOrOXyxinP5onI8AHlIj1Rg= =1ZKq -----END PGP SIGNATURE----- Merge tag 'pinctrl-v5.7-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl Pull pin control updates from Linus Walleij: "This is the bulk of pin control changes for the v5.7 kernel cycle. There are no core changes this time, only driver developments: - New driver for the Dialog Semiconductor DA9062 Power Management Integrated Circuit (PMIC). - Renesas SH-PFC has improved consistency, with group and register checks in the configuration checker. - New subdriver for the Qualcomm IPQ6018. - Add the RGMII pin control functionality to Qualcomm IPQ8064. - Performance and code quality cleanups in the Mediatek driver. - Improve the Broadcom BCM2835 support to cover all the GPIOs that exist in it. - The Allwinner/Sunxi driver properly masks non-wakeup IRQs on suspend. - Add some missing groups and functions to the Ingenic driver. - Convert some of the Freescale device tree bindings to use the new and all improved JSON YAML markup. - Refactorings and support for the SFIO/GPIO in the Tegra194 SoC driver. - Support high impedance mode in the Spreadtrum/Unisoc driver" * tag 'pinctrl-v5.7-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (64 commits) pinctrl: qcom: fix compilation error pinctrl: qcom: use scm_call to route GPIO irq to Apps pinctrl: sprd: Add pin high impedance mode support pinctrl: sprd: Use the correct pin output configuration pinctrl: tegra: Add SFIO/GPIO programming on Tegra194 pinctrl: tegra: Renumber the GG.0 and GG.1 pins pinctrl: tegra: Do not add default pin range on Tegra194 pinctrl: tegra: Pass struct tegra_pmx for pin range check pinctrl: tegra: Fix "Scmitt" -> "Schmitt" typo pinctrl: tegra: Fix whitespace issues for improved readability pinctrl: mediatek: Use scnprintf() for avoiding potential buffer overflow pinctrl: freescale: drop the dependency on ARM64 for i.MX8M Revert "pinctrl: mvebu: armada-37xx: use use platform api" dt-bindings: pinctrl: at91: Fix a typo ("descibe") pinctrl: meson: add tsin pinctrl for meson gxbb/gxl/gxm pinctrl: sprd: Fix the kconfig warning pinctrl: ingenic: add hdmi-ddc pin control group pinctrl: sirf/atlas7: Replace zero-length array with flexible-array member pinctrl: sprd: Allow the SPRD pinctrl driver building into a module pinctrl: Export some needed symbols at module load time ... |
||
Linus Torvalds
|
8c1b724ddb |
ARM:
* GICv4.1 support * 32bit host removal PPC: * secure (encrypted) using under the Protected Execution Framework ultravisor s390: * allow disabling GISA (hardware interrupt injection) and protected VMs/ultravisor support. x86: * New dirty bitmap flag that sets all bits in the bitmap when dirty page logging is enabled; this is faster because it doesn't require bulk modification of the page tables. * Initial work on making nested SVM event injection more similar to VMX, and less buggy. * Various cleanups to MMU code (though the big ones and related optimizations were delayed to 5.8). Instead of using cr3 in function names which occasionally means eptp, KVM too has standardized on "pgd". * A large refactoring of CPUID features, which now use an array that parallels the core x86_features. * Some removal of pointer chasing from kvm_x86_ops, which will also be switched to static calls as soon as they are available. * New Tigerlake CPUID features. * More bugfixes, optimizations and cleanups. Generic: * selftests: cleanups, new MMU notifier stress test, steal-time test * CSV output for kvm_stat. KVM/MIPS has been broken since 5.5, it does not compile due to a patch committed by MIPS maintainers. I had already prepared a fix, but the MIPS maintainers prefer to fix it in generic code rather than KVM so they are taking care of it. -----BEGIN PGP SIGNATURE----- iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAl6GOnIUHHBib256aW5p QHJlZGhhdC5jb20ACgkQv/vSX3jHroMfxwf/ZKLZiRoaovXCOG71M/eHtQb8ZIqU 3MPy+On3eC5Sk/aBxWUL9EFZsbYG6kYdbZ1VOvG9XPBoLlnkDSm/IR0kaELHtnjj oGVda/tvGn46Ne39y8xBptmb91WDcWH0vFthT/CwlMxAw3xjr+gG7Qyo+8F2CW6m SSSuLiHSBnyO1cQKruBTHZ8qnR8LlnfXEqtd6Y4LFLic0LbLIoIdRcT3wjQrcZrm Djd7wbTEYZjUfoqZ72ekwEDUsONcDLDSKcguDO9pSMSCGhpxCVT5Vy68KRpoIMs2 nzNWDKjvqQo5zb2+GWxJgkd12Hv+n7PCXZMbVrWBu1pQsewUns9m4mkpGw== =6fGt -----END PGP SIGNATURE----- Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm Pull kvm updates from Paolo Bonzini: "ARM: - GICv4.1 support - 32bit host removal PPC: - secure (encrypted) using under the Protected Execution Framework ultravisor s390: - allow disabling GISA (hardware interrupt injection) and protected VMs/ultravisor support. x86: - New dirty bitmap flag that sets all bits in the bitmap when dirty page logging is enabled; this is faster because it doesn't require bulk modification of the page tables. - Initial work on making nested SVM event injection more similar to VMX, and less buggy. - Various cleanups to MMU code (though the big ones and related optimizations were delayed to 5.8). Instead of using cr3 in function names which occasionally means eptp, KVM too has standardized on "pgd". - A large refactoring of CPUID features, which now use an array that parallels the core x86_features. - Some removal of pointer chasing from kvm_x86_ops, which will also be switched to static calls as soon as they are available. - New Tigerlake CPUID features. - More bugfixes, optimizations and cleanups. Generic: - selftests: cleanups, new MMU notifier stress test, steal-time test - CSV output for kvm_stat" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (277 commits) x86/kvm: fix a missing-prototypes "vmread_error" KVM: x86: Fix BUILD_BUG() in __cpuid_entry_get_reg() w/ CONFIG_UBSAN=y KVM: VMX: Add a trampoline to fix VMREAD error handling KVM: SVM: Annotate svm_x86_ops as __initdata KVM: VMX: Annotate vmx_x86_ops as __initdata KVM: x86: Drop __exit from kvm_x86_ops' hardware_unsetup() KVM: x86: Copy kvm_x86_ops by value to eliminate layer of indirection KVM: x86: Set kvm_x86_ops only after ->hardware_setup() completes KVM: VMX: Configure runtime hooks using vmx_x86_ops KVM: VMX: Move hardware_setup() definition below vmx_x86_ops KVM: x86: Move init-only kvm_x86_ops to separate struct KVM: Pass kvm_init()'s opaque param to additional arch funcs s390/gmap: return proper error code on ksm unsharing KVM: selftests: Fix cosmetic copy-paste error in vm_mem_region_move() KVM: Fix out of range accesses to memslots KVM: X86: Micro-optimize IPI fastpath delay KVM: X86: Delay read msr data iff writes ICR MSR KVM: PPC: Book3S HV: Add a capability for enabling secure guests KVM: arm64: GICv4.1: Expose HW-based SGIs in debugfs KVM: arm64: GICv4.1: Allow non-trapping WFI when using HW SGIs ... |
||
Bjorn Helgaas
|
d09fca9ecd |
Merge branch 'remotes/lorenzo/pci/mobiveil'
- Restructure mobiveil driver to support either Root Complex mode or Endpoint mode (Hou Zhiqiang) - Collect host initialization into one place (Hou Zhiqiang) - Collect interrupt-related code into one place (Hou Zhiqiang) - Split mobiveil into separate files under drivers/pci/controller/mobiveil for easier reuse (Hou Zhiqiang) - Add callbacks for interrupt initialization and linkup checking (Hou Zhiqiang) - Add 8- and 16-bit CSR accessors (Hou Zhiqiang) - Initialize host driver only if Header Type is "bridge" (Hou Zhiqiang) - Add DT bindings for NXP Layerscape SoCs PCIe Gen4 controller (Hou Zhiqiang) - Add PCIe Gen4 RC driver for Layerscape SoCs (Hou Zhiqiang) - Add pcie-mobiveil __iomem annotations (Hou Zhiqiang) - Add PCI_MSI_IRQ_DOMAIN Kconfig dependency (Hou Zhiqiang) * remotes/lorenzo/pci/mobiveil: PCI: mobiveil: Fix unmet dependency warning for PCIE_MOBIVEIL_PLAT PCI: mobiveil: Fix sparse different address space warnings PCI: mobiveil: Add PCIe Gen4 RC driver for Layerscape SoCs dt-bindings: PCI: Add NXP Layerscape SoCs PCIe Gen4 controller PCI: mobiveil: Add Header Type field check PCI: mobiveil: Add 8-bit and 16-bit CSR register accessors PCI: mobiveil: Allow mobiveil_host_init() to be used to re-init host PCI: mobiveil: Add callback function for link up check PCI: mobiveil: Add callback function for interrupt initialization PCI: mobiveil: Modularize the Mobiveil PCIe Host Bridge IP driver PCI: mobiveil: Collect the interrupt related operations into a function PCI: mobiveil: Move the host initialization into a function PCI: mobiveil: Introduce a new structure mobiveil_root_port |
||
Michael S. Tsirkin
|
c9b9f5f8c0 |
vdpa: move to drivers/vdpa
We have both vhost and virtio drivers that depend on vdpa. It's easier to locate it at a top level directory otherwise we run into issues e.g. if vhost is built-in but virtio is modular. Let's just move it up a level. Reported-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> |
||
Linus Torvalds
|
397a979467 |
linux-kselftest-5.7-rc1
This kselftest update Linux 5.7-rc1 consists of: - resctrl_tests for resctrl file system. resctrl isn't included in the default TARGETS list in kselftest Makefile. It can be run manually. - Kselftest harness improvements. - Kselftest framework and individual test fixes to support runs on Kernel CI rings and other environments that use relocatable build and install features. - Minor cleanups and typo fixes. -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEPZKym/RZuOCGeA/kCwJExA0NQxwFAl6Ev30ACgkQCwJExA0N Qxwl+g//SZ541vt4wL9sK00Xzer5s2EpQBWLB5jfUGm3lD+rQLbeUDUw+7iwNcRP hCZmB4NkVMBYa1ciBU+L9ax2ZdgGJnbOMqSTFSYI0MqYPH0ghNx6E1XQoaaVfj9X 18VdjORamU9PHHCv6u8s3PNEefUJUsdmbbJWq+CGf98DNxvbapFb+iH7DP/IcDjg AjopCx9x+dckPAL6NYQbIp9LRPy8giyis92O67I+IMvS8eOFkw6afaHuzR9me2H3 8YJz/JIV9MBDqHyCJswp/SilyRtv917DWPqsvjhMMk/P5NJhhCjfFwnm5t8M2Nu0 xlaz8BA0g+Ofo/y8YIr3oOJO0yTAYq2xHJx83oRPWbg9LK9gAHS6eZeGrqD0nQI8 vhfmP+ej5tXT7yu03YgkY+7192fy0Y094od86qd0RuW47On04A9yF9vSSoRsEmSq XA7n5ltVB9pqT/+c+Tq3Xeh7/NK/C2MnioAmaEBALXSIwFOUzlguIxpO3Uj1yBhl rcF0QzO8efGM9jCatJUUxxM6haIsE13ttKoBCFRGavvfSztNlOGr8j558EMUDlPR t6aaPOOiFj3OdPHb34wIDwaYjiAbCkiOdd/sVJw3fTLEB9dj+cJv/x9BFjijZnLn zk360qL+jFnHHumeUiEP0UOMXLI9NytYpbeAO7tmfZfQVoInmNQ= =FsXI -----END PGP SIGNATURE----- Merge tag 'linux-kselftest-5.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest Pull kselftest update from Shuah Khan: "This kselftest update consists of: - resctrl_tests for resctrl file system. resctrl isn't included in the default TARGETS list in kselftest Makefile. It can be run manually. - Kselftest harness improvements. - Kselftest framework and individual test fixes to support runs on Kernel CI rings and other environments that use relocatable build and install features. - Minor cleanups and typo fixes" * tag 'linux-kselftest-5.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: (25 commits) selftests: enforce local header dependency in lib.mk selftests: Fix memfd to support relocatable build (O=objdir) selftests: Fix seccomp to support relocatable build (O=objdir) selftests/harness: Handle timeouts cleanly selftests/harness: Move test child waiting logic selftests: android: Fix custom install from skipping test progs selftests: android: ion: Fix ionmap_test compile error selftests: Fix kselftest O=objdir build from cluttering top level objdir selftests/seccomp: Adjust test fixture counts selftests/ftrace: Fix typo in trigger-multihist.tc selftests/timens: Remove duplicated include <time.h> selftests/resctrl: fix spelling mistake "Errror" -> "Error" selftests/resctrl: Add the test in MAINTAINERS selftests/resctrl: Disable MBA and MBM tests for AMD selftests/resctrl: Use cache index3 id for AMD schemata masks selftests/resctrl: Add vendor detection mechanism selftests/resctrl: Add Cache Allocation Technology (CAT) selftest selftests/resctrl: Add Cache QoS Monitoring (CQM) selftest selftests/resctrl: Add MBA test selftests/resctrl: Add MBM test ... |
||
Linus Torvalds
|
f365ab31ef |
drm for 5.7-rc1
-----BEGIN PGP SIGNATURE----- iQIcBAABAgAGBQJehCE6AAoJEAx081l5xIa+bKAQAJj49Hj3WvSJV6cSl3LmgwPV IcWpR6LLVrCOQiS600NyXnbv6lTmCtnIfwEneQqm5ltQvJk38QcKQvSua6+ETi9f 0hl7IiytLwv2R/pS0g9jgSsKmbeP2bDwBAR44vK6pcK6WOgCrkpoL1F4YZEDUILT ewnRb52afF3Hw8PSG0lwgBYd7G0uto49t3nt86LjGftJgB3wPFlluVOzLHTeEh0w FZEyKuqS8hq8EZFfG1Gu1hS2ylO9y1VgYxiv18jDyRb8jUPq+gzqH6roTPRIronA whGZgC6SkyZ9NthCLBu4ITbO9wStAHoawzFfax25QwwuoOyrikuvGy3PfEUu+ixL bW2UtYK6BHLGnvZChH6E7i9J6qQbNYCn3Ty5bB1KsY06sHVoP1jYUBSicPN2ELWc 9KaBI+WROBNEkge/rizwUFfD/u0MZaaSRsVSlGDdHkD7IFj2tDPhfNWdXZQl4EwR JnndT6cu97htf7tkid7RASpJ/hnwJTb1hg0Cc9kPblOrGqEDF0K5845FLR9VptGl 5c2/KyKM/GaI793fP1TG76uDegBhV9337mUF1ZW3c6gCE7QXncZXM5jrIFRE9q2L IbvuyUYRof1gW0r1R0WVJYAi2CRBeMd7qgkQjMrbTw0o7FiYDJXB7dc5pYj2um2v mSVHikC2S1rbUdH0xbWM =I0vz -----END PGP SIGNATURE----- Merge tag 'drm-next-2020-04-01' of git://anongit.freedesktop.org/drm/drm Pull drm updates from Dave Airlie: "This is the main drm pull request for 5.7-rc1. Highlights: - i915 enables Tigerlake by default - i915 and amdgpu have initial OLED backlight support [ Jani Nikula pipes up and points out that we've had a bunch of "initial support" code for a long time already, but only now Lyude made it actually work on real world machines ] - vmwgfx add support to enable OpenGL 4 userspace - zero length arrays are mostly removed. Detailed summary: new driver: - tidss: TI Keystone platform display subsystem core: - new drm device warn macros - mode config valid for memory constrained devices - bridge bus format negotation - consolidated fake vblank event handling - dma_alloc related cleanups - drop get_crtc callback - dp: DP1.4 EDID corruption test - EDID CEA detailed timings improvements - relicense some code to dual GPL2/MIT - convert core vblank support to per-crtc support - rework drm_global_mutex - bridge rework to allow omap_dss custom driver removeal - remove drm_fb_helper connector interrfaces - zero-length array removal scheduler: - support for modifying the sched list - revert job distribution optimization - helper to pick least loaded scheduler - race condition fix mst: - various fixes - remove register_connector callback i915: - uapi to allows userspace specific CS ring buffer sizes - Tigerlake enablement patches + Tigerlake enabled by default - new sysfs entries for engine properties - display/logging refactors - eDP/DP fixes for DPCD - Gen7 back to aliasing-ppgtt - Gen8+ irq refactor - Avoid globals - GEM locking fixes and simplifications - Ice Lake and Elkhart Lake fixes and workarounds - Baytrail/Haswell instability fix - GVT - VFIO edid better support amdgpu: - Rework VM update handling in preparation for HMM support - drm load/unload removal fixups - USB-C PD firmware updates - HDCP srm support - Navi/renoir PM watermark fixes - OLED panel support - Optimize debugging vram access - Use BACO for runtime pm - DC clock programming optimizations and fixes - PSP fw loading sequence updates - Drop DRIVER_USE_AGP - Remove legacy drm load and unload callbacks - ACP Kconfig fix - Lots of fixes across the driver amdkfd: - runtime pm support - more gfx config details in amdgpu radeon: - drop DRIVER_USE_AGP vmwgfx: - Disable DMA when SEV encryption in use - Shader Model 5 support - needed for GL4 support msm: - DPU resource manager refactor - dpu using atomic global state mediatek: - MT8183 DPI support etnaviv: - out-of-bounds read fix - expose feature flags for GC400 STM32MP1 SoC - runtime suspend entry fix - dma32 zone fix hisilicon: - mode selection fixes meson: - YUV420 support lima: - add support for heap buffers tinydrm: - removal of owner field - explicit DT dependency removal - YAML schema conversion tegra: - misc cleanups tidss: - new driver virtio: - better batching of notifications to host - memory handling reworked - shmem + gpu context fixes hibmc: - add gamma_set support - improve DPMS support pl111: - Integrator IM-PD1 support sun4i: - LVDS support for A20 + A33 - DSI panel handling improvements" * tag 'drm-next-2020-04-01' of git://anongit.freedesktop.org/drm/drm: (1537 commits) drm/i915/display: Fix mode private_flags comparison at atomic_check drm/i915/gt: Stage the transfer of the virtual breadcrumb drm/i915/gt: Select the deepest available parking mode for rc6 drm/i915: Avoid live-lock with i915_vma_parked() drm/i915/gt: Treat idling as a RPS downclock event drm/i915/gt: Cancel a hung context if already closed drm/i915: Use explicit flag to mark unreachable intel_context drm/amdgpu: don't try to reserve training bo for sriov (v2) drm/amdgpu/smu11: add support for SMU AC/DC interrupts drm/amdgpu/swSMU: handle manual AC/DC notifications drm/amdgpu/swSMU: handle DC controlled by GPIO for navi1x drm/amdgpu/swSMU: set AC/DC mode based on the current system state (v2) drm/amdgpu/swSMU: correct the bootup power source for Navi1X (v2) drm/amdgpu/swSMU: use the smu11 power source helper for navi1x drm/amdgpu/smu11: add a helper to set the power source drm/amd/swSMU: add callback to set AC/DC power source (v2) drm/scheduler: fix rare NULL ptr race drm/amdgpu: fix the coverage issue to clear ArcVPGRs drm/amd/display: Fix pageflip event race condition for DCN. drm/[radeon|amdgpu]: Remove HAINAN board from max_sclk override check ... |
||
Linus Torvalds
|
c101e9bbce |
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid
Pull HID updates from Jiri Kosina: - Logitech HID++ protocol support improvement from Filipe Laíns - probe fix for Logitech-G* devices from Hans de Goede - a few other small code cleanups and support for new device IDs * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid: HID: rmi: Simplify an error handling path in 'rmi_hid_read_block()' HID: intel-ish-hid: hbm.h: Replace zero-length array with flexible-array member HID: intel-ish-hid: ishtp-dev.h: Replace zero-length array with flexible-array member HID: Add driver fixing Glorious PC Gaming Race mouse report descriptor HID: lg-g15: Do not fail the probe when we fail to disable F# emulation HID: appleir: Use devm_kzalloc() instead of kzalloc() HID: appleir: Remove unnecessary goto label HID: logitech-dj: add support for the static device in the Powerplay mat/receiver HID: mcp2221: add usb to i2c-smbus host bridge HID: logitech-dj: add debug msg when exporting a HID++ report descriptors HID: quirks: Remove ITE 8595 entry from hid_have_special_driver |
||
Linus Torvalds
|
72f35423e8 |
Merge branch 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto updates from Herbert Xu: "API: - Fix out-of-sync IVs in self-test for IPsec AEAD algorithms Algorithms: - Use formally verified implementation of x86/curve25519 Drivers: - Enhance hwrng support in caam - Use crypto_engine for skcipher/aead/rsa/hash in caam - Add Xilinx AES driver - Add uacce driver - Register zip engine to uacce in hisilicon - Add support for OCTEON TX CPT engine in marvell" * 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (162 commits) crypto: af_alg - bool type cosmetics crypto: arm[64]/poly1305 - add artifact to .gitignore files crypto: caam - limit single JD RNG output to maximum of 16 bytes crypto: caam - enable prediction resistance in HRWNG bus: fsl-mc: add api to retrieve mc version crypto: caam - invalidate entropy register during RNG initialization crypto: caam - check if RNG job failed crypto: caam - simplify RNG implementation crypto: caam - drop global context pointer and init_done crypto: caam - use struct hwrng's .init for initialization crypto: caam - allocate RNG instantiation descriptor with GFP_DMA crypto: ccree - remove duplicated include from cc_aead.c crypto: chelsio - remove set but not used variable 'adap' crypto: marvell - enable OcteonTX cpt options for build crypto: marvell - add the Virtual Function driver for CPT crypto: marvell - add support for OCTEON TX CPT engine crypto: marvell - create common Kconfig and Makefile for Marvell crypto: arm/neon - memzero_explicit aes-cbc key crypto: bcm - Use scnprintf() for avoiding potential buffer overflow crypto: atmel-i2c - Fix wakeup fail ... |
||
Mauro Carvalho Chehab
|
8967918e7c |
MAINTAINERS: drop an old reference to stm32 pwm timers doc
The DT files for pwm were merged and converted to json.
The new reference is already at the maintainers file, so
just drop the obsoleted one.
Fixes:
|
||
Mauro Carvalho Chehab
|
a3cc3345d8 |
MAINTAINERS: dt: update etnaviv file reference
The etnaviv file was converted to json and renamed.
Update its reference accordingly.
Fixes:
|
||
Jason Wang
|
961e9c8407 |
vDPA: introduce vDPA bus
vDPA device is a device that uses a datapath which complies with the virtio specifications with vendor specific control path. vDPA devices can be both physically located on the hardware or emulated by software. vDPA hardware devices are usually implemented through PCIE with the following types: - PF (Physical Function) - A single Physical Function - VF (Virtual Function) - Device that supports single root I/O virtualization (SR-IOV). Its Virtual Function (VF) represents a virtualized instance of the device that can be assigned to different partitions - ADI (Assignable Device Interface) and its equivalents - With technologies such as Intel Scalable IOV, a virtual device (VDEV) composed by host OS utilizing one or more ADIs. Or its equivalent like SF (Sub function) from Mellanox. >From a driver's perspective, depends on how and where the DMA translation is done, vDPA devices are split into two types: - Platform specific DMA translation - From the driver's perspective, the device can be used on a platform where device access to data in memory is limited and/or translated. An example is a PCIE vDPA whose DMA request was tagged via a bus (e.g PCIE) specific way. DMA translation and protection are done at PCIE bus IOMMU level. - Device specific DMA translation - The device implements DMA isolation and protection through its own logic. An example is a vDPA device which uses on-chip IOMMU. To hide the differences and complexity of the above types for a vDPA device/IOMMU options and in order to present a generic virtio device to the upper layer, a device agnostic framework is required. This patch introduces a software vDPA bus which abstracts the common attributes of vDPA device, vDPA bus driver and the communication method (vdpa_config_ops) between the vDPA device abstraction and the vDPA bus driver. This allows multiple types of drivers to be used for vDPA device like the virtio_vdpa and vhost_vdpa driver to operate on the bus and allow vDPA device could be used by either kernel virtio driver or userspace vhost drivers as: virtio drivers vhost drivers | | [virtio bus] [vhost uAPI] | | virtio device vhost device virtio_vdpa drv vhost_vdpa drv \ / [vDPA bus] | vDPA device hardware drv | [hardware bus] | vDPA hardware With the abstraction of vDPA bus and vDPA bus operations, the difference and complexity of the under layer hardware is hidden from upper layer. The vDPA bus drivers on top can use a unified vdpa_config_ops to control different types of vDPA device. Signed-off-by: Jason Wang <jasowang@redhat.com> Link: https://lore.kernel.org/r/20200326140125.19794-6-jasowang@redhat.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com> |
||
Jason Wang
|
0bbe30668d |
vhost: factor out IOTLB
This patch factors out IOTLB into a dedicated module in order to be reused by other modules like vringh. User may choose to enable the automatic retiring by specifying VHOST_IOTLB_FLAG_RETIRE flag to fit for the case of vhost device IOTLB implementation. Signed-off-by: Jason Wang <jasowang@redhat.com> Link: https://lore.kernel.org/r/20200326140125.19794-4-jasowang@redhat.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com> |
||
Jiri Kosina
|
4f8a21a6a9 | Merge branch 'for-5.7/mcp2221' into for-linus | ||
Linus Torvalds
|
29d9f30d4c |
Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from David Miller: "Highlights: 1) Fix the iwlwifi regression, from Johannes Berg. 2) Support BSS coloring and 802.11 encapsulation offloading in hardware, from John Crispin. 3) Fix some potential Spectre issues in qtnfmac, from Sergey Matyukevich. 4) Add TTL decrement action to openvswitch, from Matteo Croce. 5) Allow paralleization through flow_action setup by not taking the RTNL mutex, from Vlad Buslov. 6) A lot of zero-length array to flexible-array conversions, from Gustavo A. R. Silva. 7) Align XDP statistics names across several drivers for consistency, from Lorenzo Bianconi. 8) Add various pieces of infrastructure for offloading conntrack, and make use of it in mlx5 driver, from Paul Blakey. 9) Allow using listening sockets in BPF sockmap, from Jakub Sitnicki. 10) Lots of parallelization improvements during configuration changes in mlxsw driver, from Ido Schimmel. 11) Add support to devlink for generic packet traps, which report packets dropped during ACL processing. And use them in mlxsw driver. From Jiri Pirko. 12) Support bcmgenet on ACPI, from Jeremy Linton. 13) Make BPF compatible with RT, from Thomas Gleixnet, Alexei Starovoitov, and your's truly. 14) Support XDP meta-data in virtio_net, from Yuya Kusakabe. 15) Fix sysfs permissions when network devices change namespaces, from Christian Brauner. 16) Add a flags element to ethtool_ops so that drivers can more simply indicate which coalescing parameters they actually support, and therefore the generic layer can validate the user's ethtool request. Use this in all drivers, from Jakub Kicinski. 17) Offload FIFO qdisc in mlxsw, from Petr Machata. 18) Support UDP sockets in sockmap, from Lorenz Bauer. 19) Fix stretch ACK bugs in several TCP congestion control modules, from Pengcheng Yang. 20) Support virtual functiosn in octeontx2 driver, from Tomasz Duszynski. 21) Add region operations for devlink and use it in ice driver to dump NVM contents, from Jacob Keller. 22) Add support for hw offload of MACSEC, from Antoine Tenart. 23) Add support for BPF programs that can be attached to LSM hooks, from KP Singh. 24) Support for multiple paths, path managers, and counters in MPTCP. From Peter Krystad, Paolo Abeni, Florian Westphal, Davide Caratti, and others. 25) More progress on adding the netlink interface to ethtool, from Michal Kubecek" * git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2121 commits) net: ipv6: rpl_iptunnel: Fix potential memory leak in rpl_do_srh_inline cxgb4/chcr: nic-tls stats in ethtool net: dsa: fix oops while probing Marvell DSA switches net/bpfilter: remove superfluous testing message net: macb: Fix handling of fixed-link node net: dsa: ksz: Select KSZ protocol tag netdevsim: dev: Fix memory leak in nsim_dev_take_snapshot_write net: stmmac: add EHL 2.5Gbps PCI info and PCI ID net: stmmac: add EHL PSE0 & PSE1 1Gbps PCI info and PCI ID net: stmmac: create dwmac-intel.c to contain all Intel platform net: dsa: bcm_sf2: Support specifying VLAN tag egress rule net: dsa: bcm_sf2: Add support for matching VLAN TCI net: dsa: bcm_sf2: Move writing of CFP_DATA(5) into slicing functions net: dsa: bcm_sf2: Check earlier for FLOW_EXT and FLOW_MAC_EXT net: dsa: bcm_sf2: Disable learning for ASP port net: dsa: b53: Deny enslaving port 7 for 7278 into a bridge net: dsa: b53: Prevent tagged VLAN on port 7 for 7278 net: dsa: b53: Restore VLAN entries upon (re)configuration net: dsa: bcm_sf2: Fix overflow checks hv_netvsc: Remove unnecessary round_up for recv_completion_cnt ... |
||
Linus Torvalds
|
56a451b780 |
Bug fixes for a few printing issues, link status detection bug on AMD
hardware, and a DMA address issue with ntb_perf. Also, large series of AMD NTB patches. -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEoE9b9c3U2JxX98mqbmZLrHqL0iMFAl6CZoMACgkQbmZLrHqL 0iPdKA//frdaq8uDbBbrPm3JqLHstWPfcwegitF9YC9DOhl/cfuagblto3hz2xMA bE908tYPGkV8/jtp6G4GvhBromm9M1SUYfol0+gEjALkJNkofcO1Ug5rsNguPJq3 VpmUwvHHm9gLhVEjAPdAUkekY8G0Wt/eMTUVTl/jABAoaa2WJ3qLPrYOPl6i0D3O mrmudnH7sx6dK8tmqIA6NnVrAN3kRlDIjQ+ZmHgw+kQHuD007S6ObX/+G9KGgb6I PAp+VrBkpCT50Yx4ci4VPqCc/5ctS1OETMtsyF/eSH/YnkiSFWLUTMlLzFVoEw/0 gwvya5EJwPzyGG+UgDmBmsDd4YBFLm80RqWNqsTfx1Do0kJoulJAIKhX+m7I88n/ HIcJWJtATbYok0aXe8yv3Is8rDCqtJVRUkBKjldyseUJKHyIxwbSLnB/rVOQOVv6 Nua5MyGl0AlK9AapSXMinQiuaSP8HJhha1t8ejQ569RZeo3r9n5IoOmrPyl3fZuY pAoRYuiqg3o2ASZH7lvlXHx/GxtFRU3tb9dC0Bf9EeAeJWccUVCeiF1mVMtey6/2 GWUhJyK/rgn9y1zSog53A4Xk82Owjtjh2hdn00bBjfsnx+5DGPdIctGkcPUGzMHU D6bkZOC+4rKrm/gzO4t8j028kau8ZXk93qz2C49ICV4KPugEsIs= =nXgs -----END PGP SIGNATURE----- Merge tag 'ntb-5.7' of git://github.com/jonmason/ntb Pull NTB updates from Jon Mason: "Bug fixes for a few printing issues, link status detection bug on AMD hardware, and a DMA address issue with ntb_perf. Also, large series of AMD NTB patches" * tag 'ntb-5.7' of git://github.com/jonmason/ntb: (21 commits) NTB: add pci shutdown handler for AMD NTB NTB: send DB event when driver is loaded or un-loaded NTB: remove redundant setting of DB valid mask NTB: return link up status correctly for PRI and SEC NTB: add helper functions to set and clear sideinfo NTB: move ntb_ctrl handling to init and deinit NTB: handle link up, D0 and D3 events correctly NTB: handle link down event correctly NTB: remove handling of peer_sta from amd_link_is_up NTB: set peer_sta within event handler itself NTB: return the side info status from amd_poll_link NTB: define a new function to get link status NTB: Enable link up and down event notification NTB: clear interrupt status register NTB: Fix access to link status and control register MAINTAINERS: update maintainer list for AMD NTB driver NTB: ntb_transport: Use scnprintf() for avoiding potential buffer overflow ntb_hw_switchtec: Fix ntb_mw_clear_trans error if size == 0 ntb_tool: Fix printk format NTB: ntb_perf: Fix address err in perf_copy_chunk ... |
||
Linus Torvalds
|
dba43fc4ba |
platform-drivers-x86 for v5.7-1
* Fix for improper handling of fan_boost_mode in sysfs for ASUS laptops. * On newer ASUS laptops the 1st battery is named differently, here is a fix. * Fix Lex 2I385SW to allow both network cards to be used. * The power integrated circuit driver for Surface 3 has been added. * Refactor and clean up of Intel PMC driver and enable it on Intel Jasper Lake. * Clean up of Dell RBU driver. * Big update for Intel Speed Select technology support tool and driver. The following is an automated git shortlog grouped by driver: asus-wmi: - Support laptops where the first battery is named BATT - Fix return value of fan_boost_mode_store dell_rbu: - Unify format of the printed messages - Use max_t() to get rid of casting - Simplify cleanup code in create_packet() - don't open code list_for_each_entry*() - Use sysfs_create_group() API GPD pocket fan: - Fix error message when temp-limits are out of range i2c-multi-instantiate: - Replace zero-length array with flexible-array member intel-hid: - Move MODULE_DEVICE_TABLE() closer to the table intel_pmc_core: - Make pmc_core_substate_res_show() generic - Make pmc_core_lpm_display() generic for platforms that support sub-states - Add slp_s0_offset attribute back to tgl_reg_map - Remove duplicate 'if' to create debugfs entry - Relocate pmc_core_*_display() to outside of CONFIG_DEBUG_FS - Add debugfs support to access live status registers - Dump low power status registers on an S0ix.y failure - Add an additional parameter to pmc_core_lpm_display() - Remove slp_s0 attributes from tgl_reg_map - Refactor the driver by removing redundant code - Add debugfs entry for low power mode status registers - Add debugfs entry to access sub-state residencies - Add Atom based Jasper Lake (JSL) platform support intel-vbtn: - Move MODULE_DEVICE_TABLE() closer to the table ISST: - Fix wrong unregister type PDx86: - Kconfig: Fix a typo - Kconfig: Group modules by companies and functions - MAINTAINERS: Sort entries in database for PDx86 - Makefile: Group modules by companies and functions platform/x86/intel-uncore-freq: - Add release callback - Fix static checker issue and potential race condition pmc_atom: - Add Lex 2I385SW to critclk_systems DMI table sony-laptop: - Use scnprintf() for avoiding potential buffer overflow surface3_power: - Fix always true condition in mshw0011_space_handler() - Fix Kconfig section ordering - Add missed headers - Reformat GUID assignment - Drop useless macro ACPI_PTR() - Prefix POLL_INTERVAL with SURFACE_3 - Simplify mshw0011_adp_psr() to one liner - Use dev_err() instead of pr_err() - Drop unused structure definition - MSHW0011 rev-eng implementation tools/power/x86/intel-speed-select: - Fix a typo in error message - Update version - Avoid duplicate Package strings for json - Add display for enabled cpus count - Print friendly warning for bad command line - Fix avx options for turbo-freq feature - Improve CLX commands - Show error for invalid CPUs in the options - Improve core-power result and error display - Kernel interface error handling - Improve error display for turbo-freq feature - Improve error display for base-freq feature - Improve output of perf-profile commands - Enhance help for core-power assoc - Display error for invalid priority type - Check feature status first - Improve error display for perf-profile feature - Add an API for error/information print - Enhance --info option - Enhance help - Helpful warning for missing kernel interface - Store topology information - Max CPU count calculation when CPU0 is offline - Special handling for CPU 0 online/offline - Use more verbiage for clos information - Enhance core-power info command - Make target CPU optional for core-power info - Warn for invalid package id - Fix last cpu number - Fix mailbox usage for CLOS_PM_QOS_CONFIG - Avoid duplicate names for json parsing - Fix display for turbo-freq auto mode -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEqaflIX74DDDzMJJtb7wzTHR8rCgFAl6DMoEACgkQb7wzTHR8 rChW3w//WgzlhbKCl3EO8WjfSGmQHwszLq/Zcj+LLzoPQOl7t1nel1cEIWv7Y4+P /I24l2pqAD2JRgs03hNDg9i/YovPuqhLtS7t7hDNKFfNGdOhIJQkMwhrjXcapbBj UgE5cFbzXjf4400Tv1EkOylIZhOlpTmv5eGk/Dbw+5adTOlTH3MYLntv8ZfBulOh A6Dolto+zPvrbCyrMrgJSpQRIx1Rd8JV3YDXQRTpimmdsTJ7VFC55i1RLJSQ5sGw rF2qAekMExKScezSV8Yy9npDGJ1qUolhj/PciLPr71rmIuWqfdqc8eLeLmsJzIfY WO4TIQ3CTTY1FlZsOZyoeh+Kla//hRyaUoHAU0xEWDD9xKJBdzOIMEs4O/islWYL ILHs7ZdZPrHFI63mxyF0Mw5SgsSG1c6VNa19+H+YxpC4Pp8hbo891RRF7+7hBbdT YRT5yaQMD2M8QowMgxJQ7Xt3Kyz/jRO/8L59v202v3RzJvJ0UJhT+fmHV6OSz5MD SLOmLsXcWvgteNxM8TQ5yxmuDJdQVRuJqQpvPhysqlUEyhoTSLsII5evu/U/jXA4 vIx+QfUejDiy0vMeQu2xUOzxIzSzja6gLO6hKgiAw2cvUMqbOi2CIG7qwbRZkIis uj/GxlwiNfIsEKUE4728ivOHwT9Yke1x+QLl/oVwMh7zSgb+noE= =G0jF -----END PGP SIGNATURE----- Merge tag 'platform-drivers-x86-v5.7-1' of git://git.infradead.org/linux-platform-drivers-x86 Pull x86 platform driver updates from Andy Shevchenko: - Fix for improper handling of fan_boost_mode in sysfs for ASUS laptops. - On newer ASUS laptops the 1st battery is named differently, here is a fix. - Fix Lex 2I385SW to allow both network cards to be used. - The power integrated circuit driver for Surface 3 has been added. - Refactor and clean up of Intel PMC driver and enable it on Intel Jasper Lake. - Clean up of Dell RBU driver. - Big update for Intel Speed Select technology support tool and driver. * tag 'platform-drivers-x86-v5.7-1' of git://git.infradead.org/linux-platform-drivers-x86: (75 commits) platform/x86: surface3_power: Fix always true condition in mshw0011_space_handler() platform/x86: surface3_power: Fix Kconfig section ordering platform/x86: surface3_power: Add missed headers platform/x86: surface3_power: Reformat GUID assignment platform/x86: surface3_power: Drop useless macro ACPI_PTR() platform/x86: surface3_power: Prefix POLL_INTERVAL with SURFACE_3 platform/x86: surface3_power: Simplify mshw0011_adp_psr() to one liner platform/x86: surface3_power: Use dev_err() instead of pr_err() platform/x86: surface3_power: Drop unused structure definition platform/x86: surface3_power: MSHW0011 rev-eng implementation platform/x86: intel_pmc_core: Make pmc_core_substate_res_show() generic platform/x86: intel_pmc_core: Make pmc_core_lpm_display() generic for platforms that support sub-states tools/power/x86/intel-speed-select: Fix a typo in error message tools/power/x86/intel-speed-select: Update version tools/power/x86/intel-speed-select: Avoid duplicate Package strings for json tools/power/x86/intel-speed-select: Add display for enabled cpus count tools/power/x86/intel-speed-select: Print friendly warning for bad command line tools/power/x86/intel-speed-select: Fix avx options for turbo-freq feature tools/power/x86/intel-speed-select: Improve CLX commands tools/power/x86/intel-speed-select: Show error for invalid CPUs in the options ... |
||
Linus Torvalds
|
5b67fbfc32 |
Kbuild updates for v5.7
[Build system] - add CONFIG_UNUSED_KSYMS_WHITELIST, which will be useful to define a fixed set of export symbols for Generic Kernel Image (GKI) - allow to run 'make dt_binding_check' without .config - use full schema for checking DT examples in *.yaml files - make modpost fail for missing MODULE_IMPORT_NS(), which makes more sense because we know the produced modules are never loadable - Remove unused 'AS' variable [Kconfig] - sanitize DEFCONFIG_LIST, and remove ARCH_DEFCONFIG from Kconfig files - relax the 'imply' behavior so that symbols implied by y can become m - make 'imply' obey 'depends on' in order to make 'imply' really weak [Misc] - add documentation on building the kernel with Clang/LLVM - revive __HAVE_ARCH_STRLEN for 32bit sparc to use optimized strlen() - fix warning from deb-pkg builds when CONFIG_DEBUG_INFO=n - various script and Makefile cleanups -----BEGIN PGP SIGNATURE----- iQJJBAABCgAzFiEEbmPs18K1szRHjPqEPYsBB53g2wYFAl6DbP8VHG1hc2FoaXJv eUBrZXJuZWwub3JnAAoJED2LAQed4NsGAfkQALZqMCqtX9cAJej04+lnBCzwVPep 6s8/s6vW6PF92sHv+SJtHvKSnDekcZT2xT8dkPDaVmuOye8xhENs5dFZ4tSKO5D0 F8YkkM17mu/cylNZ2UCy/8weh6/TjsD7pa+mFqWo/++30JiXm12v3mVFR568KPXI kFau/3ALvY1NIr2wUAI2SOd6A4v/Epzpk0ltnFg3f5iWVFKlE03MGueAF+YZzq7v UrU73HdUxF/SBW2Jz3UtV9XY8P38uQmmtoDE8SZikG4PjW03q9w6pnhntDBl/H2b dZFg40eG7SHXN4L+OOI32ae9jePHvKpsnjeaeNoT/DZpwpuuxXu7C2EmUy+wCAnM Rw4+kiAVNppRMRH1GTdp1XjLY6PwPqizzZGmufwX+W3MI8oZdlLSUJLbrO73P/aF QR3MgkJkjvgmRVPP9fr8SNcZ39tDGI4KqLdWvjVVSC/s86aDnw/34puEfw0lj4vs gCi923iJQ7Y/QWX63TYZhy96pnedlwE2s6aR1InVER3+XMH9K1nW34CDaKQsp1CB 6zyrd40+K5ETOKo3OAjq4FttlhRkEpX9nIsffCzOz6tybysHTSrCzYhfjpIAzzYj Et5HpXbegHShIqN44yqBumt6YkTZac6Aub9FzInW2LPzZgiofDaNesDQmnQmIZOa JlUyBrjXRfwkvCH0 =wT8A -----END PGP SIGNATURE----- Merge tag 'kbuild-v5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull Kbuild updates from Masahiro Yamada: "Build system: - add CONFIG_UNUSED_KSYMS_WHITELIST, which will be useful to define a fixed set of export symbols for Generic Kernel Image (GKI) - allow to run 'make dt_binding_check' without .config - use full schema for checking DT examples in *.yaml files - make modpost fail for missing MODULE_IMPORT_NS(), which makes more sense because we know the produced modules are never loadable - Remove unused 'AS' variable Kconfig: - sanitize DEFCONFIG_LIST, and remove ARCH_DEFCONFIG from Kconfig files - relax the 'imply' behavior so that symbols implied by 'y' can become 'm' - make 'imply' obey 'depends on' in order to make 'imply' really weak Misc: - add documentation on building the kernel with Clang/LLVM - revive __HAVE_ARCH_STRLEN for 32bit sparc to use optimized strlen() - fix warning from deb-pkg builds when CONFIG_DEBUG_INFO=n - various script and Makefile cleanups" * tag 'kbuild-v5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (34 commits) Makefile: Update kselftest help information kbuild: deb-pkg: fix warning when CONFIG_DEBUG_INFO is unset kbuild: add outputmakefile to no-dot-config-targets kbuild: remove AS variable net: wan: wanxl: refactor the firmware rebuild rule net: wan: wanxl: use $(M68KCC) instead of $(M68KAS) for rebuilding firmware net: wan: wanxl: use allow to pass CROSS_COMPILE_M68k for rebuilding firmware kbuild: add comment about grouped target kbuild: add -Wall to KBUILD_HOSTCXXFLAGS kconfig: remove unused variable in qconf.cc sparc: revive __HAVE_ARCH_STRLEN for 32bit sparc kbuild: refactor Makefile.dtbinst more kbuild: compute the dtbs_install destination more simply Makefile: disallow data races on gcc-10 as well kconfig: make 'imply' obey the direct dependency kconfig: allow symbols implied by y to become m net: drop_monitor: use IS_REACHABLE() to guard net_dm_hw_report() modpost: return error if module is missing ns imports and MODULE_ALLOW_MISSING_NAMESPACE_IMPORTS=n modpost: rework and consolidate logging interface kbuild: allow to run dt_binding_check without kernel configuration ... |
||
Linus Torvalds
|
b3aa112d57 |
selinux/stable-5.7 PR 20200330
-----BEGIN PGP SIGNATURE----- iQJIBAABCAAyFiEES0KozwfymdVUl37v6iDy2pc3iXMFAl6Ch6wUHHBhdWxAcGF1 bC1tb29yZS5jb20ACgkQ6iDy2pc3iXPdcg/9FDMS/n0Xl1HQBUyu26EwLu3aUpNE BdghXW1LKSTp7MrOENE60PGzZSAiC07ci1DqFd7zfLPZf2q5IwPwOBa/Avy8z95V oHKqcMT6WO1SPOm/PxZn16FCKyET4gZDTXvHBAyiyFsbk36R522ZY615P9T3eLu/ ZA1NFsSjj68SqMCUlAWfeqjcbQiX63bryEpugOIg0qWy7R/+rtWxj9TjriZ+v9tq uC45UcjBqphpmoPG8BifA3jjyclwO3DeQb5u7E8//HPPraGeB19ntsymUg7ljoGk NrqCkZtv6E+FRCDTR5f0O7M1T4BWJodxw2NwngnTwKByLC25EZaGx80o+VyMt0eT Pog+++JZaa5zZr2OYOtdlPVMLc2ALL6p/8lHOqFU3GKfIf04hWOm6/Lb2IWoXs3f CG2b6vzoXYyjbF0Q7kxadb8uBY2S1Ds+CVu2HMBBsXsPdwbbtFWOT/6aRAQu61qn PW+f47NR8By3SO6nMzWts2SZEERZNIEdSKeXHuR7As1jFMXrHLItreb4GCSPay5h 2bzRpxt2br5CDLh7Jv2pZnHtUqBWOSbslTix77+Z/hPKaNowvD9v3tc5hX87rDmB dYXROD6/KoyXFYDcMdphlvORFhqGqd5bEYuHHum/VjSIRh237+/nxFY/vZ4i4bzU 2fvpAmUlVX1c4rw= =LlWA -----END PGP SIGNATURE----- Merge tag 'selinux-pr-20200330' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux Pull SELinux updates from Paul Moore: "We've got twenty SELinux patches for the v5.7 merge window, the highlights are below: - Deprecate setting /sys/fs/selinux/checkreqprot to 1. This flag was originally created to deal with legacy userspace and the READ_IMPLIES_EXEC personality flag. We changed the default from 1 to 0 back in Linux v4.4 and now we are taking the next step of deprecating it, at some point in the future we will take the final step of rejecting 1. - Allow kernfs symlinks to inherit the SELinux label of the parent directory. In order to preserve backwards compatibility this is protected by the genfs_seclabel_symlinks SELinux policy capability. - Optimize how we store filename transitions in the kernel, resulting in some significant improvements to policy load times. - Do a better job calculating our internal hash table sizes which resulted in additional policy load improvements and likely general SELinux performance improvements as well. - Remove the unused initial SIDs (labels) and improve how we handle initial SIDs. - Enable per-file labeling for the bpf filesystem. - Ensure that we properly label NFS v4.2 filesystems to avoid a temporary unlabeled condition. - Add some missing XFS quota command types to the SELinux quota access controls. - Fix a problem where we were not updating the seq_file position index correctly in selinuxfs. - We consolidate some duplicated code into helper functions. - A number of list to array conversions. - Update Stephen Smalley's email address in MAINTAINERS" * tag 'selinux-pr-20200330' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux: selinux: clean up indentation issue with assignment statement NFS: Ensure security label is set for root inode MAINTAINERS: Update my email address selinux: avtab_init() and cond_policydb_init() return void selinux: clean up error path in policydb_init() selinux: remove unused initial SIDs and improve handling selinux: reduce the use of hard-coded hash sizes selinux: Add xfs quota command types selinux: optimize storage of filename transitions selinux: factor out loop body from filename_trans_read() security: selinux: allow per-file labeling for bpffs selinux: generalize evaluate_cond_node() selinux: convert cond_expr to array selinux: convert cond_av_list to array selinux: convert cond_list to array selinux: sel_avc_get_stat_idx should increase position index selinux: allow kernfs symlinks to inherit parent directory context selinux: simplify evaluate_cond_node() Documentation,selinux: deprecate setting checkreqprot to 1 selinux: move status variables out of selinux_ss |
||
Linus Torvalds
|
cad18da0af |
Couple of cleanup patches
-----BEGIN PGP SIGNATURE----- iIoEABYIADIWIQQW3WBGcnu5yJnSXn0kTJLX0iGMLAUCXoI7uxQcdG9ueS5sdWNr QGludGVsLmNvbQAKCRAkTJLX0iGMLPQ6AP9sOGL/6nzqGKx7+GWP4LCPWqSrNBsh nvGoDhx86lOuDgEAryhKYNSPWCW9eLFd8YguSRKdSav8Ed0HtR2kbYiv8wM= =qgHx -----END PGP SIGNATURE----- Merge tag 'please-pull-ia64_for_5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux Pull ia64 updates from Tony Luck: "Couple of cleanup patches" * tag 'please-pull-ia64_for_5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux: tty/serial: cleanup after ioc*_serial driver removal ia64: replace setup_irq() by request_irq() |
||
Linus Torvalds
|
d71e064449 |
MIPS updates for v5.7:
- loongson64 irq rework - dmi support loongson - replace setup_irq() by request_irq() - jazz cleanups - minor cleanups and fixes -----BEGIN PGP SIGNATURE----- iQJOBAABCAA4FiEEbt46xwy6kEcDOXoUeZbBVTGwZHAFAl6B2ewaHHRzYm9nZW5k QGFscGhhLmZyYW5rZW4uZGUACgkQeZbBVTGwZHBNNRAAhaZWpw1eP/cUAqCMH2VU vrEFi6hmXJwSE5RFeq5ykLig45ObkkYJnTXbSH8SuOhwH3NBnjYSJuMxpGrsXt7p U3NPWCqCqo2Ff+qFJlLvmATYMtpKK58xL5nsY4eXgQwMrki28SMB8L7TYq6nme5q zbZeZxOo4k3MTw4fpy1BTMnnssYSyXwaSP5YFBEfRLgJ38ciu2fSmHIKj89z/fnK k/xPuBz8Mh8CwKOuaCsFFO27R8Dmj6s9N2YKimP8dt8h/rzDXXH9O9ZxYW5tWvxk f04nM3UvfAGdGQKhwR695DmGtXOBcKM/UaW+X2m0LRpV1qFvZ6D9P09zrYzJXHZV 5NfAzczra+qafuZDCHmq/B2Bv3ddoiiF91zHZ2e59IXAJAXr7bu5CsCy53avWkeG EFEXpicTXBWD6OpYOaG8K4SrJS6EZ6JRJJ3lHiqrAeqF/EmD6tmYXavMXHpScdl8 u0uCCm6Dh4/UxmwwYRTu3pgh6PmB7LAUemKZgMsSGeN4/BiwCrG6Vm/DouxJDMum HWSI0LpBzChHiBlT2ldN+AxeH09ovJ9EmYN8pti4ciGMNaLWKCbwcrlj0sZNmcof NEhRrdsrHcawVK0xabiDFihDAnWtKiFTz4IaK3i/I8lF+L18fm30SGafT+G2vNhp GItmmbmxPmA7qOJVDpwLEUs= =OuFQ -----END PGP SIGNATURE----- Merge tag 'mips_5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux Pull MIPS updates from Thomas Bogendoerfer: - loongson64 irq rework - dmi support loongson - replace setup_irq() by request_irq() - jazz cleanups - minor cleanups and fixes * tag 'mips_5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: (44 commits) MIPS: ralink: mt7621: Fix soc_device introduction MIPS: Exclude more dsemul code when CONFIG_MIPS_FP_SUPPORT=n MIPS/tlbex: Fix LDDIR usage in setup_pw() for Loongson-3 MIPS: do not compile generic functions for CONFIG_CAVIUM_OCTEON_SOC MAINTAINERS: Update Loongson64 entry MIPS: Loongson64: Load built-in dtbs MIPS: Loongson64: Add generic dts dt-bindings: mips: Add loongson boards MIPS: Loongson64: Drop legacy IRQ code dt-bindings: interrupt-controller: Add Loongson-3 HTPIC irqchip: Add driver for Loongson-3 HyperTransport PIC controller dt-bindings: interrupt-controller: Add Loongson LIOINTC irqchip: loongson-liointc: Workaround LPC IRQ Errata irqchip: Add driver for Loongson I/O Local Interrupt Controller docs: mips: remove no longer needed au1xxx_ide.rst documentation MIPS: Alchemy: remove no longer used au1xxx_ide.h header ide: remove no longer used au1xxx-ide driver MIPS: Add support for Desktop Management Interface (DMI) firmware: dmi: Add macro SMBIOS_ENTRY_POINT_SCAN_START MIPS: ralink: mt7621: introduce 'soc_device' initialization ... |
||
Mauro Carvalho Chehab
|
92f2b6ac29 |
docs: dt: fix references to m_can.txt file
This file was converted to json and renamed. Update its
references accordingly.
Fixes:
|
||
Paolo Bonzini
|
cf39d37539 |
KVM/arm updates for Linux 5.7
- GICv4.1 support - 32bit host removal -----BEGIN PGP SIGNATURE----- iQJDBAABCgAtFiEEn9UcU+C1Yxj9lZw9I9DQutE9ekMFAl6DKKIPHG1hekBrZXJu ZWwub3JnAAoJECPQ0LrRPXpDDe0P/30Oda6HJdcUY+g0dnHkH8N7t+VKjPPnihlX WBaT0Y4SzMsfAtG5lQqS48A50dXKWW70QvwkZjxu7abQhYFWGd2SGtTQxwqJXT8J I6MBh4r9xrIfiqzVT2BXslA6id5H6wCyyFI6vKm/IFkIu1J6JtwnKakQ0CIddS1d Blbgj5jcxGw+2xOppHCQXbWwwDdmYWkMZEBZjmhkezddqLDK+oaAUiUhHHHizTsB kLjgqYBVENpR1zDIsGpQAJloKXAiHfBQshQAmnhnBNzXE60LZ0n0/iODU9U5FDEO 5j0DRWccKvsIMsUh7JpPr5xerGJ0rqk1IwPC2JcyzfRbvRLMpK1IOWfhI5Tg5lbP 4Ev96QLEMBnKOWMSE0MqnMdq6JPzDLA6WZ28HZe2nc3/oWNgsSDtlXigx4xFFxTX zfc2YpAgFu3xJkPf8PtWTFvItm0AvFNFynPg0Rr/NsGf/FGeszYR4cLcHmv5NlWS IiV4+lgnlmr2LZr3VjUaumbtWIpuVF4Db5Al2K2E/PCN7ObfEkyCweDic8ophkH8 sMS9TI38aH1Efy+I2Nfxxqpy8BcElZAMrAWt9R27A4JRLHdr7j5DsGnyRigXHgRe pFgbqtk/EjWkHwjaJVg8kPxf2+2P05VZsQeGG721nbKAIKDetM3RA2BflexdsptY kXplNsVr =eILh -----END PGP SIGNATURE----- Merge tag 'kvmarm-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD KVM/arm updates for Linux 5.7 - GICv4.1 support - 32bit host removal |
||
Dave Airlie
|
5fc0df93fc |
Linux 5.6
-----BEGIN PGP SIGNATURE----- iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAl6BIG4eHHRvcnZhbGRz QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGlHUH/RCFve2sfHRPjRW+ xR5SaLVAw6XKvtKBq7yvKmHEwqNJnL79IHyqqtSrtfFr2FfaH/KvYiCbbAezvSrM np0udGu7STKGd21CWuyEZJudyhXkOwMRNiFiCXWp7rs35oh8T0TpJxMzo2Nc1nLk JFQPqAP6OSvq4IkWEywKQI+Au3Z1IBf83xVjZ1s+MKPQHYD49x2hc4cQntL5/cnm a3DoR2iBkYiGZCZ9dDqAqJTnMQIiCbACdZXgGjNRUpdyA/dtAjsMl11NPYHm8TA2 3AHBupAK50WBZGad6xv2qKQyScsmoJG2mv92QjlOFz0Tpiu6rLnDlLYREDVB6YH6 qbLDsc8= =XEIU -----END PGP SIGNATURE----- Merge v5.6 into drm-next msm needed rc6, so I just went and merged release (msm has been in drm-next outside of this tree) Signed-off-by: Dave Airlie <airlied@redhat.com> |
||
David S. Miller
|
ed52f2c608 |
Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Signed-off-by: David S. Miller <davem@davemloft.net> |
||
Linus Torvalds
|
642e53ead6 |
Merge branch 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler updates from Ingo Molnar: "The main changes in this cycle are: - Various NUMA scheduling updates: harmonize the load-balancer and NUMA placement logic to not work against each other. The intended result is better locality, better utilization and fewer migrations. - Introduce Thermal Pressure tracking and optimizations, to improve task placement on thermally overloaded systems. - Implement frequency invariant scheduler accounting on (some) x86 CPUs. This is done by observing and sampling the 'recent' CPU frequency average at ~tick boundaries. The CPU provides this data via the APERF/MPERF MSRs. This hopefully makes our capacity estimates more precise and keeps tasks on the same CPU better even if it might seem overloaded at a lower momentary frequency. (As usual, turbo mode is a complication that we resolve by observing the maximum frequency and renormalizing to it.) - Add asymmetric CPU capacity wakeup scan to improve capacity utilization on asymmetric topologies. (big.LITTLE systems) - PSI fixes and optimizations. - RT scheduling capacity awareness fixes & improvements. - Optimize the CONFIG_RT_GROUP_SCHED constraints code. - Misc fixes, cleanups and optimizations - see the changelog for details" * 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (62 commits) threads: Update PID limit comment according to futex UAPI change sched/fair: Fix condition of avg_load calculation sched/rt: cpupri_find: Trigger a full search as fallback kthread: Do not preempt current task if it is going to call schedule() sched/fair: Improve spreading of utilization sched: Avoid scale real weight down to zero psi: Move PF_MEMSTALL out of task->flags MAINTAINERS: Add maintenance information for psi psi: Optimize switching tasks inside shared cgroups psi: Fix cpu.pressure for cpu.max and competing cgroups sched/core: Distribute tasks within affinity masks sched/fair: Fix enqueue_task_fair warning thermal/cpu-cooling, sched/core: Move the arch_set_thermal_pressure() API to generic scheduler code sched/rt: Remove unnecessary push for unfit tasks sched/rt: Allow pulling unfitting task sched/rt: Optimize cpupri_find() on non-heterogenous systems sched/rt: Re-instate old behavior in select_task_rq_rt() sched/rt: cpupri_find: Implement fallback mechanism for !fit case sched/fair: Fix reordering of enqueue/dequeue_task_fair() sched/fair: Fix runnable_avg for throttled cfs ... |
||
Linus Torvalds
|
a776c270a0 |
Merge branch 'efi-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull EFI updates from Ingo Molnar: "The EFI changes in this cycle are much larger than usual, for two (positive) reasons: - The GRUB project is showing signs of life again, resulting in the introduction of the generic Linux/UEFI boot protocol, instead of x86 specific hacks which are increasingly difficult to maintain. There's hope that all future extensions will now go through that boot protocol. - Preparatory work for RISC-V EFI support. The main changes are: - Boot time GDT handling changes - Simplify handling of EFI properties table on arm64 - Generic EFI stub cleanups, to improve command line handling, file I/O, memory allocation, etc. - Introduce a generic initrd loading method based on calling back into the firmware, instead of relying on the x86 EFI handover protocol or device tree. - Introduce a mixed mode boot method that does not rely on the x86 EFI handover protocol either, and could potentially be adopted by other architectures (if another one ever surfaces where one execution mode is a superset of another) - Clean up the contents of 'struct efi', and move out everything that doesn't need to be stored there. - Incorporate support for UEFI spec v2.8A changes that permit firmware implementations to return EFI_UNSUPPORTED from UEFI runtime services at OS runtime, and expose a mask of which ones are supported or unsupported via a configuration table. - Partial fix for the lack of by-VA cache maintenance in the decompressor on 32-bit ARM. - Changes to load device firmware from EFI boot service memory regions - Various documentation updates and minor code cleanups and fixes" * 'efi-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (114 commits) efi/libstub/arm: Fix spurious message that an initrd was loaded efi/libstub/arm64: Avoid image_base value from efi_loaded_image partitions/efi: Fix partition name parsing in GUID partition entry efi/x86: Fix cast of image argument efi/libstub/x86: Use ULONG_MAX as upper bound for all allocations efi: Fix a mistype in comments mentioning efivar_entry_iter_begin() efi/libstub: Avoid linking libstub/lib-ksyms.o into vmlinux efi/x86: Preserve %ebx correctly in efi_set_virtual_address_map() efi/x86: Ignore the memory attributes table on i386 efi/x86: Don't relocate the kernel unless necessary efi/x86: Remove extra headroom for setup block efi/x86: Add kernel preferred address to PE header efi/x86: Decompress at start of PE image load address x86/boot/compressed/32: Save the output address instead of recalculating it efi/libstub/x86: Deal with exit() boot service returning x86/boot: Use unsigned comparison for addresses efi/x86: Avoid using code32_start efi/x86: Make efi32_pe_entry() more readable efi/x86: Respect 32-bit ABI in efi32_pe_entry() efi/x86: Annotate the LOADED_IMAGE_PROTOCOL_GUID with SYM_DATA ... |