2162 Commits

Author SHA1 Message Date
Linus Torvalds
8096acd744 Networking fixes for 5.14-rc2, including fixes from bpf and netfilter.
Current release - regressions:
 
  - sock: fix parameter order in sock_setsockopt()
 
 Current release - new code bugs:
 
  - netfilter: nft_last:
      - fix incorrect arithmetic when restoring last used
      - honor NFTA_LAST_SET on restoration
 
 Previous releases - regressions:
 
  - udp: properly flush normal packet at GRO time
 
  - sfc: ensure correct number of XDP queues; don't allow enabling the
         feature if there isn't sufficient resources to Tx from any CPU
 
  - dsa: sja1105: fix address learning getting disabled on the CPU port
 
  - mptcp: addresses a rmem accounting issue that could keep packets
         in subflow receive buffers longer than necessary, delaying
 	MPTCP-level ACKs
 
  - ip_tunnel: fix mtu calculation for ETHER tunnel devices
 
  - do not reuse skbs allocated from skbuff_fclone_cache in the napi
    skb cache, we'd try to return them to the wrong slab cache
 
  - tcp: consistently disable header prediction for mptcp
 
 Previous releases - always broken:
 
  - bpf: fix subprog poke descriptor tracking use-after-free
 
  - ipv6:
       - allocate enough headroom in ip6_finish_output2() in case
         iptables TEE is used
       - tcp: drop silly ICMPv6 packet too big messages to avoid
         expensive and pointless lookups (which may serve as a DDOS
 	vector)
       - make sure fwmark is copied in SYNACK packets
       - fix 'disable_policy' for forwarded packets (align with IPv4)
 
  - netfilter: conntrack: do not renew entry stuck in tcp SYN_SENT state
 
  - netfilter: conntrack: do not mark RST in the reply direction coming
       after SYN packet for an out-of-sync entry
 
  - mptcp: cleanly handle error conditions with MP_JOIN and syncookies
 
  - mptcp: fix double free when rejecting a join due to port mismatch
 
  - validate lwtstate->data before returning from skb_tunnel_info()
 
  - tcp: call sk_wmem_schedule before sk_mem_charge in zerocopy path
 
  - mt76: mt7921: continue to probe driver when fw already downloaded
 
  - bonding: fix multiple issues with offloading IPsec to (thru?) bond
 
  - stmmac: ptp: fix issues around Qbv support and setting time back
 
  - bcmgenet: always clear wake-up based on energy detection
 
 Misc:
 
  - sctp: move 198 addresses from unusable to private scope
 
  - ptp: support virtual clocks and timestamping
 
  - openvswitch: optimize operation for key comparison
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEE6jPA+I1ugmIBA4hXMUZtbf5SIrsFAmDu3mMACgkQMUZtbf5S
 Irsjxg//UwcPJMYFmXV+fGkEsWYe1Kf29FcUDEeANFtbltfAcIfZ0GoTbSDRnrVb
 HcYAKcm4XRx5bWWdQrQsQq/yiLbnS/rSLc7VRB+uRHWRKl3eYcaUB2rnCXsxrjGw
 wQJgOmztDCJS4BIky24iQpF/8lg7p/Gj2Ih532gh93XiYo612FrEJKkYb2/OQfYX
 GkbnZ0kL2Y1SV+bhy6aT5azvhHKM4/3eA4fHeJ2p8e2gOZ5ni0vpX0xEzdzKOCd0
 vwR/Wu3h/+2QuFYVcSsVguuM++JXACG8MAS/Tof78dtNM4a3kQxzqeh5Bv6IkfTu
 rokENLq4pjNRy+nBAOeQZj8Jd0K0kkf/PN9WMdGQtplMoFhjjV25R6PeRrV9wwPo
 peozIz2MuQo7Kfof1D+44h2foyLfdC28/Z0CvRbDpr5EHOfYynvBbrnhzIGdQp6V
 xgftKTOdgz2Djgg8HiblZund1FA44OYerddVAASrIsnSFnIz1VLVQIsfV+GLBwwc
 FawrIZ6WfIjzRSrDGOvDsbAQI47T/1jbaPJeK6XgjWkQmjEd6UtRWRZLYCxemQEw
 4HP3sWC96BOehuD8ylipVE1oFqrxCiOB/fZxezXqjo8dSX3NLdak4cCHTHoW5SuZ
 eEAxQRaBliKd+P7hoy9cZ57CAu3zUa8kijfM5QRlCAHF+zSxaPs=
 =QFnb
 -----END PGP SIGNATURE-----

Merge tag 'net-5.14-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net

Pull networking fixes from Jakub Kicinski.
 "Including fixes from bpf and netfilter.

  Current release - regressions:

   - sock: fix parameter order in sock_setsockopt()

  Current release - new code bugs:

   - netfilter: nft_last:
       - fix incorrect arithmetic when restoring last used
       - honor NFTA_LAST_SET on restoration

  Previous releases - regressions:

   - udp: properly flush normal packet at GRO time

   - sfc: ensure correct number of XDP queues; don't allow enabling the
     feature if there isn't sufficient resources to Tx from any CPU

   - dsa: sja1105: fix address learning getting disabled on the CPU port

   - mptcp: addresses a rmem accounting issue that could keep packets in
     subflow receive buffers longer than necessary, delaying MPTCP-level
     ACKs

   - ip_tunnel: fix mtu calculation for ETHER tunnel devices

   - do not reuse skbs allocated from skbuff_fclone_cache in the napi
     skb cache, we'd try to return them to the wrong slab cache

   - tcp: consistently disable header prediction for mptcp

  Previous releases - always broken:

   - bpf: fix subprog poke descriptor tracking use-after-free

   - ipv6:
       - allocate enough headroom in ip6_finish_output2() in case
         iptables TEE is used
       - tcp: drop silly ICMPv6 packet too big messages to avoid
         expensive and pointless lookups (which may serve as a DDOS
         vector)
       - make sure fwmark is copied in SYNACK packets
       - fix 'disable_policy' for forwarded packets (align with IPv4)

   - netfilter: conntrack:
       - do not renew entry stuck in tcp SYN_SENT state
       - do not mark RST in the reply direction coming after SYN packet
         for an out-of-sync entry

   - mptcp: cleanly handle error conditions with MP_JOIN and syncookies

   - mptcp: fix double free when rejecting a join due to port mismatch

   - validate lwtstate->data before returning from skb_tunnel_info()

   - tcp: call sk_wmem_schedule before sk_mem_charge in zerocopy path

   - mt76: mt7921: continue to probe driver when fw already downloaded

   - bonding: fix multiple issues with offloading IPsec to (thru?) bond

   - stmmac: ptp: fix issues around Qbv support and setting time back

   - bcmgenet: always clear wake-up based on energy detection

  Misc:

   - sctp: move 198 addresses from unusable to private scope

   - ptp: support virtual clocks and timestamping

   - openvswitch: optimize operation for key comparison"

* tag 'net-5.14-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (158 commits)
  net: dsa: properly check for the bridge_leave methods in dsa_switch_bridge_leave()
  sfc: add logs explaining XDP_TX/REDIRECT is not available
  sfc: ensure correct number of XDP queues
  sfc: fix lack of XDP TX queues - error XDP TX failed (-22)
  net: fddi: fix UAF in fza_probe
  net: dsa: sja1105: fix address learning getting disabled on the CPU port
  net: ocelot: fix switchdev objects synced for wrong netdev with LAG offload
  net: Use nlmsg_unicast() instead of netlink_unicast()
  octeontx2-pf: Fix uninitialized boolean variable pps
  ipv6: allocate enough headroom in ip6_finish_output2()
  net: hdlc: rename 'mod_init' & 'mod_exit' functions to be module-specific
  net: bridge: multicast: fix MRD advertisement router port marking race
  net: bridge: multicast: fix PIM hello router port marking race
  net: phy: marvell10g: fix differentiation of 88X3310 from 88X3340
  dsa: fix for_each_child.cocci warnings
  virtio_net: check virtqueue_add_sgs() return value
  mptcp: properly account bulk freed memory
  selftests: mptcp: fix case multiple subflows limited by server
  mptcp: avoid processing packet if a subflow reset
  mptcp: fix syncookie process if mptcp can not_accept new subflow
  ...
2021-07-14 09:24:32 -07:00
Linus Torvalds
c932ed0adb TTY / Serial patches for 5.14-rc1
Here is the big set of tty and serial driver patches for 5.14-rc1.
 
 A bit more than normal, but nothing major, lots of cleanups.  Highlights
 are:
 	- lots of tty api cleanups and mxser driver cleanups from Jiri
 	- build warning fixes
 	- various serial driver updates
 	- coding style cleanups
 	- various tty driver minor fixes and updates
 	- removal of broken and disable r3964 line discipline (finally!)
 
 All of these have been in linux-next for a while with no reported
 issues.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 
 iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCYOM4qQ8cZ3JlZ0Brcm9h
 aC5jb20ACgkQMUfUDdst+ylKvQCfbh+OmTkDlDlDhSWlxuV05M1XTXoAoLUcLZru
 s5JCnwSZztQQLMDHj7Pd
 =Zupm
 -----END PGP SIGNATURE-----

Merge tag 'tty-5.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty

Pull tty / serial updates from Greg KH:
 "Here is the big set of tty and serial driver patches for 5.14-rc1.

  A bit more than normal, but nothing major, lots of cleanups.
  Highlights are:

   - lots of tty api cleanups and mxser driver cleanups from Jiri

   - build warning fixes

   - various serial driver updates

   - coding style cleanups

   - various tty driver minor fixes and updates

   - removal of broken and disable r3964 line discipline (finally!)

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'tty-5.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (227 commits)
  serial: mvebu-uart: remove unused member nb from struct mvebu_uart
  arm64: dts: marvell: armada-37xx: Fix reg for standard variant of UART
  dt-bindings: mvebu-uart: fix documentation
  serial: mvebu-uart: correctly calculate minimal possible baudrate
  serial: mvebu-uart: do not allow changing baudrate when uartclk is not available
  serial: mvebu-uart: fix calculation of clock divisor
  tty: make linux/tty_flip.h self-contained
  serial: Prefer unsigned int to bare use of unsigned
  serial: 8250: 8250_omap: Fix possible interrupt storm on K3 SoCs
  serial: qcom_geni_serial: use DT aliases according to DT bindings
  Revert "tty: serial: Add UART driver for Cortina-Access platform"
  tty: serial: Add UART driver for Cortina-Access platform
  MAINTAINERS: add me back as mxser maintainer
  mxser: Documentation, fix typos
  mxser: Documentation, make the docs up-to-date
  mxser: Documentation, remove traces of callout device
  mxser: introduce mxser_16550A_or_MUST helper
  mxser: rename flags to old_speed in mxser_set_serial_info
  mxser: use port variable in mxser_set_serial_info
  mxser: access info->MCR under info->slock
  ...
2021-07-05 14:08:24 -07:00
Oleksij Rempel
a3609ac24c net: usb: asix: ax88772: suspend PHY on driver probe
After probe/bind sequence is the PHY in active state, even if interface
is stopped. As result, on some systems like Samsung Exynos5250 SoC based Arndale
board, the ASIX PHY will be able to negotiate the link but fail to
transmit the data.

To handle it, suspend the PHY on probe.

Fixes: e532a096be0e ("net: usb: asix: ax88772: add phylib support")
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reported-by: Marek Szyprowski <m.szyprowski@samsung.com>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-01 11:12:13 -07:00
Yajun Deng
478890682f usbnet: add usbnet_event_names[] for kevent
Modify the netdev_dbg content from int to char * in usbnet_defer_kevent(),
this looks more readable.

Signed-off-by: Yajun Deng <yajun.deng@linux.dev>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-24 12:34:45 -07:00
Jakub Kicinski
adc2e56ebe Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Trivial conflicts in net/can/isotp.c and
tools/testing/selftests/net/mptcp/mptcp_connect.sh

scaled_ppm_to_ppb() was moved from drivers/ptp/ptp_clock.c
to include/linux/ptp_clock_kernel.h in -next so re-apply
the fix there.

Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-06-18 19:47:02 -07:00
Hayes Wang
b67fda9a82 r8152: store the information of the pipes
Store the information of the pipes to avoid calling usb_rcvctrlpipe(),
usb_sndctrlpipe(), usb_rcvbulkpipe(), usb_sndbulkpipe(), and
usb_rcvintpipe() frequently.

Signed-off-by: Hayes Wang <hayeswang@realtek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-17 11:58:11 -07:00
Linyu Yuan
c3b26fdf1b net: cdc_eem: fix tx fixup skb leak
when usbnet transmit a skb, eem fixup it in eem_tx_fixup(),
if skb_copy_expand() failed, it return NULL,
usbnet_start_xmit() will have no chance to free original skb.

fix it by free orginal skb in eem_tx_fixup() first,
then check skb clone status, if failed, return NULL to usbnet.

Fixes: 9f722c0978b0 ("usbnet: CDC EEM support (v5)")
Signed-off-by: Linyu Yuan <linyyuan@codeaurora.org>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-17 11:30:25 -07:00
Kees Cook
99718abdc0 r8152: Avoid memcpy() over-reading of ETH_SS_STATS
In preparation for FORTIFY_SOURCE performing compile-time and run-time
field bounds checking for memcpy(), memmove(), and memset(), avoid
intentionally reading across neighboring array fields.

The memcpy() is copying the entire structure, not just the first array.
Adjust the source argument so the compiler can do appropriate bounds
checking.

Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-16 13:02:06 -07:00
Dongliang Mu
56b786d866 net: usb: fix possible use-after-free in smsc75xx_bind
The commit 46a8b29c6306 ("net: usb: fix memory leak in smsc75xx_bind")
fails to clean up the work scheduled in smsc75xx_reset->
smsc75xx_set_multicast, which leads to use-after-free if the work is
scheduled to start after the deallocation. In addition, this patch
also removes a dangling pointer - dev->data[0].

This patch calls cancel_work_sync to cancel the scheduled work and set
the dangling pointer to NULL.

Fixes: 46a8b29c6306 ("net: usb: fix memory leak in smsc75xx_bind")
Signed-off-by: Dongliang Mu <mudongliangabcd@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-16 12:36:09 -07:00
Kristian Evensen
057d49334c qmi_wwan: Do not call netif_rx from rx_fixup
When the QMI_WWAN_FLAG_PASS_THROUGH is set, netif_rx() is called from
qmi_wwan_rx_fixup(). When the call to netif_rx() is successful (which is
most of the time), usbnet_skb_return() is called (from rx_process()).
usbnet_skb_return() will then call netif_rx() a second time for the same
skb.

Simplify the code and avoid the redundant netif_rx() call by changing
qmi_wwan_rx_fixup() to always return 1 when QMI_WWAN_FLAG_PASS_THROUGH
is set. We then leave it up to the existing infrastructure to call
netif_rx().

Suggested-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: Kristian Evensen <kristian.evensen@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-15 11:29:28 -07:00
Maciej Żenczykowski
c1a3d40673 net: cdc_ncm: switch to eth%d interface naming
This is meant to make the host side cdc_ncm interface consistently
named just like the older CDC protocols: cdc_ether & cdc_ecm
(and even rndis_host), which all use 'FLAG_ETHER | FLAG_POINTTOPOINT'.

include/linux/usb/usbnet.h:
  #define FLAG_ETHER	0x0020		/* maybe use "eth%d" names */
  #define FLAG_WLAN	0x0080		/* use "wlan%d" names */
  #define FLAG_WWAN	0x0400		/* use "wwan%d" names */
  #define FLAG_POINTTOPOINT 0x1000	/* possibly use "usb%d" names */

drivers/net/usb/usbnet.c @ line 1711:
  strcpy (net->name, "usb%d");
  ...
  // heuristic:  "usb%d" for links we know are two-host,
  // else "eth%d" when there's reasonable doubt.  userspace
  // can rename the link if it knows better.
  if ((dev->driver_info->flags & FLAG_ETHER) != 0 &&
      ((dev->driver_info->flags & FLAG_POINTTOPOINT) == 0 ||
       (net->dev_addr [0] & 0x02) == 0))
          strcpy (net->name, "eth%d");
  /* WLAN devices should always be named "wlan%d" */
  if ((dev->driver_info->flags & FLAG_WLAN) != 0)
          strcpy(net->name, "wlan%d");
  /* WWAN devices should always be named "wwan%d" */
  if ((dev->driver_info->flags & FLAG_WWAN) != 0)
          strcpy(net->name, "wwan%d");

So by using ETHER | POINTTOPOINT the interface naming is
either usb%d or eth%d based on the global uniqueness of the
mac address of the device.

Without this 2.5gbps ethernet dongles which all seem to use the cdc_ncm
driver end up being called usb%d instead of eth%d even though they're
definitely not two-host.  (All 1gbps & 5gbps ethernet usb dongles I've
tested don't hit this problem due to use of different drivers, primarily
r8152 and aqc111)

Fixes tag is based purely on git blame, and is really just here to make
sure this hits LTS branches newer than v4.5.

Cc: Lorenzo Colitti <lorenzo@google.com>
Fixes: 4d06dd537f95 ("cdc_ncm: do not call usbnet_link_change from cdc_ncm_bind")
Signed-off-by: Maciej Żenczykowski <maze@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-15 11:24:57 -07:00
Oleksij Rempel
4a2c7217cd net: usb: asix: ax88772: manage PHY PM from MAC
Take over PHY power management, otherwise PHY framework will try to
access ASIX MDIO bus before MAC resume was completed.

Fixes: e532a096be0e ("net: usb: asix: ax88772: add phylib support")
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reported-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reported-by: Jon Hunter <jonathanh@nvidia.com>
Suggested-by: Heiner Kallweit <hkallweit1@gmail.com>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-11 13:00:31 -07:00
Colin Ian King
c6be5a22fd net: usb: asix: ax88772: Fix less than zero comparison of a u16
The comparison of the u16 priv->phy_addr < 0 is always false because
phy_addr is unsigned. Fix this by assigning the return from the call
to function asix_read_phy_addr to int ret and using this for the
less than zero error check comparison.

Fixes: 7e88b11a862a ("net: usb: asix: refactor asix_read_phy_addr() and handle errors on return")
Addresses-Coverity: ("Unsigned compared against 0")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-09 14:54:03 -07:00
Colin Ian King
e676659465 net: usb: asix: Fix less than zero comparison of a u16
The comparison of the u16 priv->phy_addr < 0 is always false because
phy_addr is unsigned. Fix this by assigning the return from the call
to function asix_read_phy_addr to int ret and using this for the
less than zero error check comparison.

Addresses-Coverity: ("Unsigned compared against 0")
Fixes: e532a096be0e ("net: usb: asix: ax88772: add phylib support")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-09 14:54:03 -07:00
Oleksij Rempel
2c9d6c2b87 usbnet: run unbind() before unregister_netdev()
unbind() is the proper place to disconnect PHY, but it will fail if
netdev is already unregistered.

Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-07 13:23:02 -07:00
Oleksij Rempel
d275afb663 net: usb: asix: add error handling for asix_mdio_* functions
This usb devices can be removed at any time, so we need to forward
correct error value if device was detached.

Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-07 13:23:02 -07:00
Oleksij Rempel
34a1dee6bc net: usb: asix: ax88772: add generic selftest support
With working phylib support we are able now to use generic selftests.

Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-07 13:23:02 -07:00
Oleksij Rempel
e532a096be net: usb: asix: ax88772: add phylib support
To be able to use ax88772 with external PHYs and use advantage of
existing PHY drivers, we need to port at least ax88772 part of asix
driver to the phylib framework.

Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-07 13:23:02 -07:00
Oleksij Rempel
dde2584692 net: usb/phy: asix: add support for ax88772A/C PHYs
Add support for build-in x88772A/C PHYs

Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-07 13:23:02 -07:00
Oleksij Rempel
7e88b11a86 net: usb: asix: refactor asix_read_phy_addr() and handle errors on return
Refactor asix_read_phy_addr() to return usable error value directly and
make sure all callers handle this error.

Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-07 13:23:02 -07:00
Oleksij Rempel
218d154f54 net: usb: asix: ax88772_bind: use devm_kzalloc() instead of kzalloc()
Make resource management easier, use devm_kzalloc().

Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-07 13:23:02 -07:00
Zheng Yongjun
f62c4f3870 net: usb: Fix spelling mistakes
wierdness  ==> weirdness
multicat  ==> multicast
limite  ==> limit
adddress  ==> address
operater  ==> operator
intial  ==> initial
smaler  ==> smaller
Communcation  ==> Communication
funcitons  ==> functions
everytime  ==> every time
Neigbor  ==> Neighbor
performace  ==> performance

Signed-off-by: Zheng Yongjun <zhengyongjun3@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-01 17:05:05 -07:00
Hayes Wang
163d01c56e r8152: support pauseparam of ethtool_ops
Support get_pauseparam and set_pauseparam of ethtool_ops.

Signed-off-by: Hayes Wang <hayeswang@realtek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-01 15:26:58 -07:00
Greg Kroah-Hartman
910cc95373 Merge 5.13-rc4 into tty-next
We need the tty/serial fixes in here as well.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-05-31 09:44:28 +02:00
Jakub Kicinski
5ada57a9a6 Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
cdc-wdm: s/kill_urbs/poison_urbs/ to fix build

Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-05-27 09:55:10 -07:00
Pavel Skripkin
46a8b29c63 net: usb: fix memory leak in smsc75xx_bind
Syzbot reported memory leak in smsc75xx_bind().
The problem was is non-freed memory in case of
errors after memory allocation.

backtrace:
  [<ffffffff84245b62>] kmalloc include/linux/slab.h:556 [inline]
  [<ffffffff84245b62>] kzalloc include/linux/slab.h:686 [inline]
  [<ffffffff84245b62>] smsc75xx_bind+0x7a/0x334 drivers/net/usb/smsc75xx.c:1460
  [<ffffffff82b5b2e6>] usbnet_probe+0x3b6/0xc30 drivers/net/usb/usbnet.c:1728

Fixes: d0cad871703b ("smsc75xx: SMSC LAN75xx USB gigabit ethernet adapter driver")
Cc: stable@kernel.vger.org
Reported-and-tested-by: syzbot+b558506ba8165425fee2@syzkaller.appspotmail.com
Signed-off-by: Pavel Skripkin <paskripkin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-05-24 14:26:25 -07:00
Johan Hovold
1a6e9a9c68 net: hso: fix control-request directions
The direction of the pipe argument must match the request-type direction
bit or control requests may fail depending on the host-controller-driver
implementation.

Fix the tiocmset and rfkill requests which erroneously used
usb_rcvctrlpipe().

Fixes: 72dc1c096c70 ("HSO: add option hso driver")
Cc: stable@vger.kernel.org      # 2.6.27
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-05-24 13:16:58 -07:00
Hayes Wang
1a44fb38cc r8152: check the informaton of the device
Verify some fields of the USB descriptor to make sure the driver
could be used by the device.

Besides, remove the check of endpoint number in rtl8152_probe().
usb_find_common_endpoints() includes it.

BugLink: https://syzkaller.appspot.com/bug?id=912c9c373656996801b4de61f1e3cb326fe940aa
Reported-by: syzbot+95afd23673f5dd295c57@syzkaller.appspotmail.com
Fixes: c2198943e33b ("r8152: search the configuration of vendor mode")
Signed-off-by: Hayes Wang <hayeswang@realtek.com>
Reviewed-by: Johan Hovold <johan@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-05-24 13:15:29 -07:00
YueHaibing
86fe2f8aa1 net: cdc_ncm: use DEVICE_ATTR_RW macro
Use DEVICE_ATTR_RW helper instead of plain DEVICE_ATTR,
which makes the code a bit shorter and easier to read.

Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-05-20 15:50:54 -07:00
YueHaibing
7567d603b3 net: usb: hso: use DEVICE_ATTR_RO macro
Use DEVICE_ATTR_RO helper instead of plain DEVICE_ATTR,
which makes the code a bit shorter and easier to read.

Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-05-20 15:50:54 -07:00
Hui Tang
094fefd663 net: usb: remove leading spaces before tabs
There are a few leading spaces before tabs and remove it by running
the following commard:

    $ find . -name '*.[ch]' | xargs sed -r -i 's/^[ ]+\t/\t/'

Cc: Hayes Wang <hayeswang@realtek.com>
Signed-off-by: Hui Tang <tanghui20@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-05-20 15:10:57 -07:00
Johan Hovold
4d52ebc7ac net: hso: bail out on interrupt URB allocation failure
Commit 31db0dbd7244 ("net: hso: check for allocation failure in
hso_create_bulk_serial_device()") recently started returning an error
when the driver fails to allocate resources for the interrupt endpoint
and tiocmget functionality.

For consistency let's bail out from probe also if the URB allocation
fails.

Signed-off-by: Johan Hovold <johan@kernel.org>
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-05-19 13:11:39 -07:00
Markus Bloechl
33e6b1674f net: lan78xx: advertise tx software timestamping support
lan78xx already calls skb_tx_timestamp() in its lan78xx_start_xmit().
Override .get_ts_info to also advertise this capability
(SOF_TIMESTAMPING_TX_SOFTWARE) via ethtool.

Signed-off-by: Markus Blöchl <markus.bloechl@ipetronik.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-05-18 13:38:48 -07:00
Juerg Haefliger
06b38e233c drivers/net: Remove leading spaces in Kconfig
Remove leading spaces before tabs in Kconfig file(s) by running the
following command:

  $ find drivers/net -name 'Kconfig*' | xargs sed -r -i 's/^[ ]+\t/\t/'

Signed-off-by: Juerg Haefliger <juergh@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-05-17 16:04:54 -07:00
Dan Carpenter
31db0dbd72 net: hso: check for allocation failure in hso_create_bulk_serial_device()
In current kernels, small allocations never actually fail so this
patch shouldn't affect runtime.

Originally this error handling code written with the idea that if
the "serial->tiocmget" allocation failed, then we would continue
operating instead of bailing out early.  But in later years we added
an unchecked dereference on the next line.

	serial->tiocmget->serial_state_notification = kzalloc();
        ^^^^^^^^^^^^^^^^^^

Since these allocations are never going fail in real life, this is
mostly a philosophical debate, but I think bailing out early is the
correct behavior that the user would want.  And generally it's safer to
bail as soon an error happens.

Fixes: af0de1303c4e ("usb: hso: obey DMA rules in tiocmget")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Johan Hovold <johan@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-05-17 13:51:35 -07:00
Jonathan Davies
b81ac7841d net: cdc_eem: fix URL to CDC EEM 1.0 spec
The old URL is no longer accessible.

Signed-off-by: Jonathan Davies <jonathan.davies@nutanix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-05-14 15:17:18 -07:00
Jiri Slaby
fff4ef17a9 tty: make tty_operations::chars_in_buffer return uint
tty_operations::chars_in_buffer is another hook which is expected to
return values >= 0. So make it explicit by the return type too -- use
unsigned int.

Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Acked-By: Anton Ivanov <anton.ivanov@cambridgegreys.com>
Acked-by: David Sterba <dsterba@suse.com>
Cc: Jeff Dike <jdike@addtoit.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Samuel Iglesias Gonsalvez <siglesias@igalia.com>
Cc: Jens Taprogge <jens.taprogge@taprogge.org>
Cc: Karsten Keil <isdn@linux-pingi.de>
Cc: Ulf Hansson <ulf.hansson@linaro.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: David Lin <dtwlin@gmail.com>
Cc: Johan Hovold <johan@kernel.org>
Cc: Alex Elder <elder@kernel.org>
Cc: Jiri Kosina <jikos@kernel.org>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Cc: Oliver Neukum <oneukum@suse.com>
Cc: Felipe Balbi <balbi@kernel.org>
Cc: Mathias Nyman <mathias.nyman@intel.com>
Cc: Marcel Holtmann <marcel@holtmann.org>
Cc: Johan Hedberg <johan.hedberg@gmail.com>
Cc: Luiz Augusto von Dentz <luiz.dentz@gmail.com>
Link: https://lore.kernel.org/r/20210505091928.22010-27-jslaby@suse.cz
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-05-13 18:29:11 +02:00
Jiri Slaby
03b3b1a240 tty: make tty_operations::write_room return uint
Line disciplines expect a positive value or zero returned from
tty->ops->write_room (invoked by tty_write_room). So make this
assumption explicit by using unsigned int as a return value. Both of
tty->ops->write_room and tty_write_room.

Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Acked-by: Laurentiu Tudor <laurentiu.tudor@nxp.com>
Acked-by: Alex Elder <elder@linaro.org>
Acked-by: Max Filippov <jcmvbkbc@gmail.com> # xtensa
Acked-by: David Sterba <dsterba@suse.com>
Acked-By: Anton Ivanov <anton.ivanov@cambridgegreys.com>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: Matt Turner <mattst88@gmail.com>
Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com>
Cc: Helge Deller <deller@gmx.de>
Cc: Jeff Dike <jdike@addtoit.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: Chris Zankel <chris@zankel.net>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Samuel Iglesias Gonsalvez <siglesias@igalia.com>
Cc: Jens Taprogge <jens.taprogge@taprogge.org>
Cc: Karsten Keil <isdn@linux-pingi.de>
Cc: Scott Branden <scott.branden@broadcom.com>
Cc: Ulf Hansson <ulf.hansson@linaro.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: David Lin <dtwlin@gmail.com>
Cc: Johan Hovold <johan@kernel.org>
Cc: Jiri Kosina <jikos@kernel.org>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Cc: Oliver Neukum <oneukum@suse.com>
Cc: Felipe Balbi <balbi@kernel.org>
Cc: Mathias Nyman <mathias.nyman@intel.com>
Cc: Marcel Holtmann <marcel@holtmann.org>
Cc: Johan Hedberg <johan.hedberg@gmail.com>
Cc: Luiz Augusto von Dentz <luiz.dentz@gmail.com>
Link: https://lore.kernel.org/r/20210505091928.22010-23-jslaby@suse.cz
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-05-13 17:03:20 +02:00
Loic Poulain
cac6fb015f usb: class: cdc-wdm: WWAN framework integration
The WWAN framework provides a unified way to handle WWAN/modems and its
control port(s). It has initially been introduced to support MHI/PCI
modems, offering the same control protocols as the USB variants such as
MBIM, QMI, AT... The WWAN framework exposes these control protocols as
character devices, similarly to cdc-wdm, but in a bus agnostic fashion.

This change adds registration of the USB modem cdc-wdm control endpoints
to the WWAN framework as standard control ports (wwanXpY...).

Exposing cdc-wdm through WWAN framework normally maintains backward
compatibility, e.g:
    $ qmicli --device-open-qmi -d /dev/wwan0p1QMI --dms-get-ids
instead of
    $ qmicli --device-open-qmi -d /dev/cdc-wdm0 --dms-get-ids

However, some tools may rely on cdc-wdm driver/device name for device
detection. It is then safer to keep the 'legacy' cdc-wdm character
device to prevent any breakage. This is handled in this change by
API mutual exclusion, only one access method can be used at a time,
either cdc-wdm chardev or WWAN API.

Note that unknown channel types (other than MBIM, AT or MBIM) are not
registered to the WWAN framework.

Signed-off-by: Loic Poulain <loic.poulain@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-05-11 16:17:56 -07:00
Johan Hovold
2ad5692db7 net: hso: fix NULL-deref on disconnect regression
Commit 8a12f8836145 ("net: hso: fix null-ptr-deref during tty device
unregistration") fixed the racy minor allocation reported by syzbot, but
introduced an unconditional NULL-pointer dereference on every disconnect
instead.

Specifically, the serial device table must no longer be accessed after
the minor has been released by hso_serial_tty_unregister().

Fixes: 8a12f8836145 ("net: hso: fix null-ptr-deref during tty device unregistration")
Cc: stable@vger.kernel.org
Cc: Anirudh Rayabharam <mail@anirudhrb.com>
Reported-by: Leonardo Antoniazzi <leoanto@aruba.it>
Signed-off-by: Johan Hovold <johan@kernel.org>
Reviewed-by: Anirudh Rayabharam <mail@anirudhrb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-26 12:54:44 -07:00
Hayes Wang
9c68011bd7 r8152: remove some bit operations
Remove DELL_TB_RX_AGG_BUG and LENOVO_MACPASSTHRU flags of rtl8152_flags.
They are only set when initializing and wouldn't be change. It is enough
to record them with variables.

Signed-off-by: Hayes Wang <hayeswang@realtek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-25 18:21:19 -07:00
Hayes Wang
55319eeb5b r8152: redefine REALTEK_USB_DEVICE macro
Redefine REALTEK_USB_DEVICE macro with USB_DEVICE_INTERFACE_CLASS and
USB_DEVICE_AND_INTERFACE_INFO to simply the code.

Although checkpatch.pl shows the following error, it is more readable.

	ERROR: Macros with complex values should be enclosed in parentheses

Signed-off-by: Hayes Wang <hayeswang@realtek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-23 13:55:42 -07:00
Hayes Wang
e7865ea51b r8152: remove NCM mode from REALTEK_USB_DEVICE macro
The RTL8156 support CDC NCM mode. And users could set the configuration
of the USB device between vendor and NCM mode dynamically by themselves.
That is, the driver doesn't need to set vendor mode from NCM mode.

Fixes: 195aae321c82 ("r8152: support new chips")
Signed-off-by: Hayes Wang <hayeswang@realtek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-23 13:55:42 -07:00
Hayes Wang
f49c35b89b r8152: replace return with break for ram code speedup mode timeout
When the timeout occurs, we still have to run the following process
for releasing patch request. Otherwise, the PHY would keep no link.
Therefore, use break to stop the loop of loading firmware and
release the patch request rather than return the function directly.

Fixes: 4a51b0e8a014 ("r8152: support PHY firmware for RTL8156 series")
Signed-off-by: Hayes Wang <hayeswang@realtek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-22 14:14:45 -07:00
Hayes Wang
c2198943e3 r8152: search the configuration of vendor mode
The vendor mode is not always at config #1, so it is necessary to
set the correct configuration number.

Signed-off-by: Hayes Wang <hayeswang@realtek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-16 15:28:31 -07:00
Hayes Wang
4a51b0e8a0 r8152: support PHY firmware for RTL8156 series
Support new firmware type and method for RTL8156 series.

Signed-off-by: Hayes Wang <hayeswang@realtek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-16 15:28:31 -07:00
Hayes Wang
195aae321c r8152: support new chips
Support RTL8153C, RTL8153D, RTL8156A, and RTL8156B. The RTL8156A
and RTL8156B are the 2.5G ethernet.

Signed-off-by: Hayes Wang <hayeswang@realtek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-16 15:28:31 -07:00
Hayes Wang
67ce1a806f r8152: add help function to change mtu
The different chips may have different requests when changing mtu.
Therefore, add a new help function of rtl_ops to change mtu. Besides,
reset the tx/rx after changing mtu.

Additionally, add mtu_to_size() and size_to_mtu() macros to simplify
the code.

Signed-off-by: Hayes Wang <hayeswang@realtek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-16 15:28:31 -07:00
Hayes Wang
a8a7be178e r8152: adjust rtl8152_check_firmware function
Use bits operations to record and check the firmware.

Signed-off-by: Hayes Wang <hayeswang@realtek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-16 15:28:31 -07:00
Hayes Wang
5133bcc748 r8152: set inter fram gap time depending on speed
Set the maximum inter frame gap time (144ns) for speed 10M/half and
100M/half. It improves the performance for those speeds. And, there
is no effect for the other speeds.

For 10M/half and 100M/half, the fast inter frame gap time let the
device couldn't use the feature of the aggregation effectively,
because the transfer would be completed fastly. Therefore, use the
maximum value to improve the effect of the aggregation. However, you
may not feel the improvement for fast CPUs, because they compensate
for the effect of the aggregation.

Signed-off-by: Hayes Wang <hayeswang@realtek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-16 15:28:31 -07:00