IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
- Server-to-server copy code from Olga. To use it, client and
both servers must have support, the target server must be able
to access the source server over NFSv4.2, and the target
server must have the inter_copy_offload_enable module
parameter set.
- Improvements and bugfixes for the new filehandle cache,
especially in the container case, from Trond
- Also from Trond, better reporting of write errors.
- Y2038 work from Arnd.
-----BEGIN PGP SIGNATURE-----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=FxLY
-----END PGP SIGNATURE-----
Merge tag 'nfsd-5.6' of git://linux-nfs.org/~bfields/linux
Pull nfsd updates from Bruce Fields:
"Highlights:
- Server-to-server copy code from Olga.
To use it, client and both servers must have support, the target
server must be able to access the source server over NFSv4.2, and
the target server must have the inter_copy_offload_enable module
parameter set.
- Improvements and bugfixes for the new filehandle cache, especially
in the container case, from Trond
- Also from Trond, better reporting of write errors.
- Y2038 work from Arnd"
* tag 'nfsd-5.6' of git://linux-nfs.org/~bfields/linux: (55 commits)
sunrpc: expiry_time should be seconds not timeval
nfsd: make nfsd_filecache_wq variable static
nfsd4: fix double free in nfsd4_do_async_copy()
nfsd: convert file cache to use over/underflow safe refcount
nfsd: Define the file access mode enum for tracing
nfsd: Fix a perf warning
nfsd: Ensure sampling of the write verifier is atomic with the write
nfsd: Ensure sampling of the commit verifier is atomic with the commit
sunrpc: clean up cache entry add/remove from hashtable
sunrpc: Fix potential leaks in sunrpc_cache_unhash()
nfsd: Ensure exclusion between CLONE and WRITE errors
nfsd: Pass the nfsd_file as arguments to nfsd4_clone_file_range()
nfsd: Update the boot verifier on stable writes too.
nfsd: Fix stable writes
nfsd: Allow nfsd_vfs_write() to take the nfsd_file as an argument
nfsd: Fix a soft lockup race in nfsd_file_mark_find_or_create()
nfsd: Reduce the number of calls to nfsd_file_gc()
nfsd: Schedule the laundrette regularly irrespective of file errors
nfsd: Remove unused constant NFSD_FILE_LRU_RESCAN
nfsd: Containerise filecache laundrette
...
Fix sparse warning:
fs/nfsd/filecache.c:55:25: warning:
symbol 'nfsd_filecache_wq' was not declared. Should it be static?
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Chen Zhou <chenzhou10@huawei.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
This frees "copy->nf_src" before and again after the goto.
Fixes: ce0887ac96 ("NFSD add nfs4 inter ssc to nfsd4_copy")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Olga Kornievskaia <kolga@netapp.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Use the 'refcount_t' type instead of 'atomic_t' for improved
refcounting safety.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
perf does not know how to deal with a __builtin_bswap32() call, and
complains. All other functions just store the xid etc in host endian
form, so let's do that in the tracepoint for nfsd_file_acquire too.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
When doing an unstable write, we need to ensure that we sample the
write verifier before releasing the lock, and allowing a commit to
the same file to proceed.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
When we have a successful commit, ensure we sample the commit verifier
before releasing the lock.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Ensure that we can distinguish between synchronous CLONE and
WRITE errors, and that we can assign them correctly.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Needed in order to fix exclusion w.r.t. writes.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
We don't know if the error returned by the fsync() call is
exclusive to the data written by the stable write, so play it
safe.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Strictly speaking, a stable write error needs to reflect the
write + the commit of that write (and only that write). To
ensure that we don't pick up the write errors from other
writebacks, add a rw_semaphore to provide exclusion.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Needed in order to fix stable writes.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
If nfsd_file_mark_find_or_create() keeps winning the race for the
nfsd_file_fsnotify_group->mark_mutex against nfsd_file_mark_put()
then it can soft lock up, since fsnotify_add_inode_mark() ends
up always finding an existing entry.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Don't call nfsd_file_gc() on every put of the reference in nfsd_file_put().
Instead, do it only when we're expecting the refcount to go to 1.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Emsure we schedule the laundrette even if the struct file is carrying
file errors.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Ensure that if the filecache laundrette gets stuck, it only affects
the knfsd instances of one container.
The notifier callbacks can be called from various contexts so avoid
using synchonous filesystem operations that might deadlock.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
If the lookup keeps finding a nfsd_file with an unhashed open file,
then retry once only.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Cc: stable@vger.kernel.org
Fixes: 65294c1f2c "nfsd: add a new struct file caching facility to nfsd"
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Fixes coccicheck warning:
fs/nfsd/nfssvc.c:394:2-14: WARNING: Assignment of 0/1 to bool variable
fs/nfsd/nfssvc.c:407:2-14: WARNING: Assignment of 0/1 to bool variable
fs/nfsd/nfssvc.c:422:2-14: WARNING: Assignment of 0/1 to bool variable
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: zhengbin <zhengbin13@huawei.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Fixes coccicheck warning:
fs/nfsd/nfs4proc.c:235:1-18: WARNING: Assignment of 0/1 to bool variable
fs/nfsd/nfs4proc.c:368:1-17: WARNING: Assignment of 0/1 to bool variable
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: zhengbin <zhengbin13@huawei.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Fixes coccicheck warning:
fs/nfsd/vfs.c:1389:5-13: WARNING: Assignment of 0/1 to bool variable
fs/nfsd/vfs.c:1398:5-13: WARNING: Assignment of 0/1 to bool variable
fs/nfsd/vfs.c:1415:2-10: WARNING: Assignment of 0/1 to bool variable
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: zhengbin <zhengbin13@huawei.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
The function was removed a long time ago, but the declaration
and a dummy implementation are still there, referencing the
deprecated time_t type.
Remove both.
Fixes: f958a1320f ("nfsd4: remove unnecessary lease-setting function")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
gen_confirm() generates a unique identifier based on the current
time. This overflows in year 2038, but that is harmless since it
generally does not lead to duplicates, as long as the time has
been initialized by a real-time clock or NTP.
Using ktime_get_boottime_seconds() or ktime_get_seconds() would
avoid the overflow, but it would be more likely to result in
non-unique numbers.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
A couple of time_t variables are only used to track the state of the
lease time and its expiration. The code correctly uses the 'time_after()'
macro to make this work on 32-bit architectures even beyond year 2038,
but the get_seconds() function and the time_t type itself are deprecated
as they behave inconsistently between 32-bit and 64-bit architectures
and often lead to code that is not y2038 safe.
As a minor issue, using get_seconds() leads to problems with concurrent
settimeofday() or clock_settime() calls, in the worst case timeout never
triggering after the time has been set backwards.
Change nfsd to use time64_t and ktime_get_boottime_seconds() here. This
is clearly excessive, as boottime by itself means we never go beyond 32
bits, but it does mean we handle this correctly and consistently without
having to worry about corner cases and should be no more expensive than
the previous implementation on 64-bit architectures.
The max_cb_time() function gets changed in order to avoid an expensive
64-bit division operation, but as the lease time is at most one hour,
there is no change in behavior.
Also do the same for server-to-server copy expiration time.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
[bfields@redhat.com: fix up copy expiration]
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
The nfsd4_blocked_lock->nbl_time timestamp is recorded in jiffies,
but then compared to a CLOCK_REALTIME timestamp later on, which makes
no sense.
For consistency with the other timestamps, change this to use a time_t.
This is a change in behavior, which may cause regressions, but the
current code is not sensible. On a system with CONFIG_HZ=1000,
the 'time_after((unsigned long)nbl->nbl_time, (unsigned long)cutoff))'
check is false for roughly the first 18 days of uptime and then true
for the next 49 days.
Fixes: 7919d0a27f ("nfsd: add a LRU list for blocked locks")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
The nfsd4_cb_layout_done() function takes a 'time_t' value,
multiplied by NSEC_PER_SEC*2 to get a nanosecond value.
This works fine on 64-bit architectures, but on 32-bit, any
value over 1 second results in a signed integer overflow
with unexpected results.
Cast one input to a 64-bit type in order to produce the
same result that we have on 64-bit architectures, regarless
of the type of nfsd4_lease.
Fixes: 6b9b21073d ("nfsd: give up on CB_LAYOUTRECALLs after two lease periods")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Change to time64_t and ktime_get_real_seconds() to make the
logic work correctly on 32-bit architectures beyond 2038.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Guardtime handling in nfs3 differs between 32-bit and 64-bit
architectures, and uses the deprecated time_t type.
Change it to using time64_t, which behaves the same way on
64-bit and 32-bit architectures, treating the number as an
unsigned 32-bit entity with a range of year 1970 to 2106
consistently, and avoiding the y2038 overflow.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
The local boot time variable gets truncated to time_t at the moment,
which can lead to slightly odd behavior on 32-bit architectures.
Use ktime_get_real_seconds() instead of get_seconds() to always
get a 64-bit result, and keep it that way wherever possible.
It still gets truncated in a few places:
- When assigning to cl_clientid.cl_boot, this is already documented
and is only used as a unique identifier.
- In clients_still_reclaiming(), the truncation is to 'unsigned long'
in order to use the 'time_before() helper.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
The values in encode_time_delta are always small and don't
overflow the range of 'struct timespec', so changing it has
no effect.
Change it to timespec64 as a prerequisite for removing the
timespec definition later.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
The decode_time3 function behaves differently on 32-bit
and 64-bit architectures: on the former, a 32-bit timestamp
gets converted into an signed number and then into a timestamp
between 1902 and 2038, while on the latter it is interpreted
as unsigned in the range 1970-2106.
Change all the remaining 'timespec' in nfsd to 'timespec64'
to make the behavior the same, and use the current interpretation
of the dominant 64-bit architectures.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
The nii_time field gets truncated to 'time_t' on 32-bit architectures
before printing.
Remove the use of 'struct timespec' to product the correct output
beyond 2038.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
The delegation logic in nfsd uses the somewhat inefficient
seconds_since_boot() function to record time intervals.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
The replay variable is set in the only caller of nfsd4_encode_replay.
The assertion is unnecessary and the patch removes this check.
Signed-off-by: Aditya Pakki <pakki001@umn.edu>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
vfs_clone_file_range() can modify the metadata on the source file too,
so we need to commit that to stable storage as well.
Reported-by: Dave Chinner <david@fromorbit.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Acked-by: Dave Chinner <david@fromorbit.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
We must allow for the fact that iov_iter_write() could have returned
a short write (e.g. if there was an ENOSPC issue).
Fixes: d890be159a "nfsd: Add I/O trace points in the NFSv4 write path"
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
With cross-server COPY we've introduced the possibility that the current
or saved filehandle might not have fh_dentry/fh_export filled in, but we
missed a place that assumed it was. I think this could be triggered by
a compound like:
PUTFH(foreign filehandle)
GETATTR
SAVEFH
COPY
First, check_if_stalefh_allowed sets no_verify on the first (PUTFH) op.
Then op_func = nfsd4_putfh runs and leaves current_fh->fh_export NULL.
need_wrongsec_check returns true, since this PUTFH has OP_IS_PUTFH_LIKE
set and GETATTR does not have OP_HANDLES_WRONGSEC set.
We should probably also consider tightening the checks in
check_if_stalefh_allowed and double-checking that we don't assume the
filehandle is verified elsewhere in the compound. But I think this
fixes the immediate issue.
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Fixes: 4e48f1cccab3 "NFSD: allow inter server COPY to have... "
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Static checker revealed possible error path leading to possible
NULL pointer dereferencing.
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Fixes: e0639dc580: ("NFSD introduce async copy feature")
Signed-off-by: Olga Kornievskaia <kolga@netapp.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
There is mismatch between __be32 and u32 in nfserr and errno.
Reported-by: kbuild test robot <lkp@intel.com>
Fixes: d5e54eeb0e3d ("NFSD add nfs4 inter ssc to nfsd4_copy")
Signed-off-by: Olga Kornievskaia <kolga@netapp.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
s_stid->si_generation is a u32, copy->stateid.seqid is a __be32, so we
should be byte-swapping here if necessary.
This effectively undoes the byte-swap performed when reading
s_stid->s_generation in nfsd4_decode_copy(). Without this second swap,
the stateid we sent to the source in READ could be different from the
one the client provided us in the COPY. We didn't spot this in testing
since our implementation always uses a 0 in the seqid field. But other
implementations might not do that.
You'd think we should just skip the byte-swapping entirely, but the
s_stid field can be used for either our own stateids (in the
intra-server case) or foreign stateids (in the inter-server case), and
the former are interpreted by us and need byte-swapping.
Reported-by: kbuild test robot <lkp@intel.com>
Fixes: d5e54eeb0e3d ("NFSD add nfs4 inter ssc to nfsd4_copy")
Signed-off-by: Olga Kornievskaia <kolga@netapp.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Fix __be32 and u32 mismatch in return and assignment.
Reported-by: kbuild test robot <lkp@intel.com>
Fixes: dbd4c2dd8f13 ("NFSD add COPY_NOTIFY operation")
Signed-off-by: Olga Kornievskaia <kolga@netapp.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
We are holding the "nn->s2s_cp_lock" so we can't return directly
without unlocking first.
Fixes: f3dee17721a0 ("NFSD check stateids against copy stateids")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Given a universal address, mount the source server from the destination
server. Use an internal mount. Call the NFS client nfs42_ssc_open to
obtain the NFS struct file suitable for nfsd_copy_range.
Ability to do "inter" server-to-server depends on the an nfsd kernel
parameter "inter_copy_offload_enable".
Signed-off-by: Olga Kornievskaia <kolga@netapp.com>
The inter server to server COPY source server filehandle
is a foreign filehandle as the COPY is sent to the destination
server.
Signed-off-by: Olga Kornievskaia <kolga@netapp.com>
Incoming stateid (used by a READ) could be a saved copy stateid.
Using the provided stateid, look it up in the list of copy_notify
stateids. If found, use the parent's stateid and parent's clid
to look up the parent's stid to do the appropriate checks.
Update the copy notify timestamp (cpntf_time) with current time
this making it 'active' so that laundromat thread will not delete
copy notify state.
Signed-off-by: Olga Kornievskaia <kolga@netapp.com>
