IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
Interrupt line can be configured on different hardware in different way,
even inverted. Therefore driver should not enforce specific trigger
type - edge falling - but instead rely on Devicetree to configure it.
The Maxim 14577/77836 datasheets describe the interrupt line as active
low with a requirement of acknowledge from the CPU therefore the edge
falling is not correct.
The interrupt line is shared between PMIC and charger driver, so using
level sensitive interrupt is here especially important to avoid races.
With an edge configuration in case if first PMIC signals interrupt
followed shortly after by the RTC, the interrupt might not be yet
cleared/acked thus the second one would not be noticed.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20210602110445.33536-4-krzysztof.kozlowski@canonical.com
Interrupt line can be configured on different hardware in different way,
even inverted. Therefore driver should not enforce specific trigger
type - edge falling - but instead rely on Devicetree to configure it.
The Maxim 77693 datasheet describes the interrupt line as active low
with a requirement of acknowledge from the CPU therefore the edge
falling is not correct.
The interrupt line is shared between PMIC and RTC driver, so using level
sensitive interrupt is here especially important to avoid races. With
an edge configuration in case if first PMIC signals interrupt followed
shortly after by the RTC, the interrupt might not be yet cleared/acked
thus the second one would not be noticed.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20210602110445.33536-3-krzysztof.kozlowski@canonical.com
Interrupt line can be configured on different hardware in different way,
even inverted. Therefore driver should not enforce specific trigger
type - edge falling - but instead rely on Devicetree to configure it.
The Maxim 77686 datasheet describes the interrupt line as active low
with a requirement of acknowledge from the CPU therefore the edge
falling is not correct.
The interrupt line is shared between PMIC and RTC driver, so using level
sensitive interrupt is here especially important to avoid races. With
an edge configuration in case if first PMIC signals interrupt followed
shortly after by the RTC, the interrupt might not be yet cleared/acked
thus the second one would not be noticed.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20210602110445.33536-2-krzysztof.kozlowski@canonical.com
The LogiCVC multi-function device has a display part which is now
described in its binding. Add a patternProperties match for it.
Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Northstar's USB 2.0 PHY is part of the CRU MFD.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
CRU has a shared register that is used e.g. to control USB 2.0 PHY block
access. It's a single 32 b register. Document it as syscon so it can be
used with a regmap.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Broadcom's MISC is an MFD hardware block used on some of their SoCs like
bcm63xx and bcm4908. At this point only PCIe reset is fully understood
and documented. More functions may be added later.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Document the properties with regulator supplies for bucks and LDOs. At
least one board uses it (Exynos5250 Arndale).
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20211008114024.135335-1-krzysztof.kozlowski@canonical.com
Convert the MFD part of Samsung S5M8767 PMIC to DT schema format.
Previously the bindings were mostly in mfd/samsung,sec-core.txt.
Since all of bindings for Samsung S2M and S5M family of PMICs were
converted from mfd/samsung,sec-core.txt to respective dtschema file,
remove the former one.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20211008113931.134847-6-krzysztof.kozlowski@canonical.com
Convert the MFD part of Samsung S2MPA01 PMIC to DT schema format.
Previously the bindings were mostly in mfd/samsung,sec-core.txt.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20211008113931.134847-5-krzysztof.kozlowski@canonical.com
Convert the MFD part of Samsung S2MPS11/S2MPS13/S2MPS14/S2MPS15/S2MPU02
family of PMICs to DT schema format. Previously the bindings were
mostly in mfd/samsung,sec-core.txt.
The conversion copies parts of description from existing bindings
therefore the license is not changed from GPLv2.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20211008113931.134847-4-krzysztof.kozlowski@canonical.com
Tagged to allow further bindings to rely on these.
-----BEGIN PGP SIGNATURE-----
iQFHBAABCgAxFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmFgkpYTHGJyb29uaWVA
a2VybmVsLm9yZwAKCRAk1otyXVSH0OPnB/9M7HLzuTV7mkG0buI1vIPDjuSCWsr/
TZ9IuZIy0OmtdcXq9F0VyRq6wy6bVMXVSlrlFQLnrPLFW1/MIqeyPmLJyqwKVYh/
lyrAaHfeKck2S2ususisudBr/Qkg0ZrEX2f1eLC03xBnBEOy3Nl71s/HxbO9n4yt
ZAUk/1/UlmbhQKNlNgMtfXuXtLCGm3GRL30jb4nb/hGj/8Xb0ESmnRmkmZnVi/+H
DgHGHLDeK3Y5ntQx8IwbrPFimlvAGVgfU/ruf7Z6zmpuW2tKKcLE7ZAR8DG5ZRhw
W3WPq6YYUzAhyxgY0U2iO6wrL5rKvo65CbGOvpk9RsCYk2GxQS6BqHWX
=P4cy
-----END PGP SIGNATURE-----
Merge tag 'tags/s2m_s5m_dtschema' into tb-mfd-from-regulator-5.16
regulator/clock: Convert the s2m and s5m DT bindings to schema
Tagged to allow further bindings to rely on these.
Signed-off-by: Lee Jones <lee.jones@linaro.org>
A more recent version of the am3359 ADC is available on certain SoCs of
the am437x family. This IP has evolved a little bit and deserves its own
compatible.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20211015081506.933180-8-miquel.raynal@bootlin.com
A more recent version of the am3359 ADC/Touchscreen controller is
available on certain SoCs of the am437x family. This IP has evolved a
little bit and deserves its own compatible.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20211015081506.933180-7-miquel.raynal@bootlin.com
Now that the three hardware peaces described in this file have been
translated in yaml in 3 dedicated files (MFD, touchscreen controller and
ADC) it is time to remove this text file.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Acked-by: Rob Herring <robh@kernel.org>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20211015081506.933180-6-miquel.raynal@bootlin.com
This ADC was already described in a text file also containing an MFD
description an a touchscreen description:
Documentation/devicetree/bindings/input/touchscreen/ti-tsc-adc.txt
Let's add a proper description for this hardware.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20211015081506.933180-5-miquel.raynal@bootlin.com
This touchscreen controller is already described in a text file:
Documentation/devicetree/bindings/input/touchscreen/ti-tsc-adc.txt
After introducing a proper description of the MFD, this is the second
step. The file cannot be removed yet as it also contains an ADC
description.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20211015081506.933180-4-miquel.raynal@bootlin.com
There is a very light description of this MFD in a text file dedicated
to a touchscreen controller (which is one of the two children of the
MFD). Here is now a complete yaml description.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20211015081506.933180-3-miquel.raynal@bootlin.com
Convert the regulators of Samsung S5M8767 PMIC to DT schema format.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Message-Id: <20211008113931.134847-3-krzysztof.kozlowski@canonical.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Convert the regulators of Samsung S2MPA01 PMIC to DT schema format.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Message-Id: <20211008113931.134847-2-krzysztof.kozlowski@canonical.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Convert the regulators of Samsung
S2MPS11/S2MPS13/S2MPS14/S2MPS15/S2MPU02 family of PMICs to DT schema
format.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Message-Id: <20211008113931.134847-1-krzysztof.kozlowski@canonical.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Convert the clock provider of Samsung S2MPS11 family of PMICs to DT
schema format.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Acked-by: Stephen Boyd <sboyd@kernel.org>
Message-Id: <20211008113723.134648-4-krzysztof.kozlowski@canonical.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
The driver was always parsing "s5m8767,pmic-buck-default-dvs-idx", not
"s5m8767,pmic-buck234-default-dvs-idx".
Cc: <stable@vger.kernel.org>
Fixes: 26aec009f6b6 ("regulator: add device tree support for s5m8767")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Acked-by: Rob Herring <robh@kernel.org>
Message-Id: <20211008113723.134648-3-krzysztof.kozlowski@canonical.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
The driver and its bindings, before commit 04f9f068a619 ("regulator:
s5m8767: Modify parsing method of the voltage table of buck2/3/4") were
requiring to provide at least one safe/default voltage for DVS registers
if DVS GPIO is not being enabled.
IOW, if s5m8767,pmic-buck2-uses-gpio-dvs is missing, the
s5m8767,pmic-buck2-dvs-voltage should still be present and contain one
voltage.
This requirement was coming from driver behavior matching this condition
(none of DVS GPIO is enabled): it was always initializing the DVS
selector pins to 0 and keeping the DVS enable setting at reset value
(enabled). Therefore if none of DVS GPIO is enabled in devicetree,
driver was configuring the first DVS voltage for buck[234].
Mentioned commit 04f9f068a619 ("regulator: s5m8767: Modify parsing
method of the voltage table of buck2/3/4") broke it because DVS voltage
won't be parsed from devicetree if DVS GPIO is not enabled. After the
change, driver will configure bucks to use the register reset value as
voltage which might have unpleasant effects.
Fix this by relaxing the bindings constrain: if DVS GPIO is not enabled
in devicetree (therefore DVS voltage is also not parsed), explicitly
disable it.
Cc: <stable@vger.kernel.org>
Fixes: 04f9f068a619 ("regulator: s5m8767: Modify parsing method of the voltage table of buck2/3/4")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Acked-by: Rob Herring <robh@kernel.org>
Message-Id: <20211008113723.134648-2-krzysztof.kozlowski@canonical.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
vduse driver supporting blk
virtio-vsock support for end of record with SEQPACKET
vdpa: mac and mq support for ifcvf and mlx5
vdpa: management netlink for ifcvf
virtio-i2c, gpio dt bindings
misc fixes, cleanups
NB: when merging this with
b542e383d8c0 ("eventfd: Make signal recursion protection a task bit")
from Linus' tree, replace eventfd_signal_count with
eventfd_signal_allowed, and drop the export of eventfd_wake_count from
("eventfd: Export eventfd_wake_count to modules").
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmE1+awPHG1zdEByZWRo
YXQuY29tAAoJECgfDbjSjVRpt6EIAJy0qrc62lktNA0IiIVJSLbUbTMmFj8MzkGR
8UxZdhpjWqBPJPyaOuNeksAqTGm/UAPEYx3C2c95Jhej7anFpy7dbCtIXcPHLJME
DjcJg+EDrlNCj8m0FcsHpHWsFzPMERJpyEZNxgB5WazQbv+yWhGrg2FN5DCnF0Ro
ZFYeKSVty148pQ0nHl8X0JM2XMtqit+O+LvKN2HQZ+fubh7BCzMxzkHY0QLHIzUS
UeZqd3Qm8YcbqnlX38P5D6k+NPiTEgknmxaBLkPxg6H3XxDAmaIRFb8Ldd1rsgy1
zTLGDiSGpVDIpawRnuEAzqJThV3Y5/MVJ1WD+mDYQ96tmhfp+KY=
=DBH/
-----END PGP SIGNATURE-----
Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost
Pull virtio updates from Michael Tsirkin:
- vduse driver ("vDPA Device in Userspace") supporting emulated virtio
block devices
- virtio-vsock support for end of record with SEQPACKET
- vdpa: mac and mq support for ifcvf and mlx5
- vdpa: management netlink for ifcvf
- virtio-i2c, gpio dt bindings
- misc fixes and cleanups
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: (39 commits)
Documentation: Add documentation for VDUSE
vduse: Introduce VDUSE - vDPA Device in Userspace
vduse: Implement an MMU-based software IOTLB
vdpa: Support transferring virtual addressing during DMA mapping
vdpa: factor out vhost_vdpa_pa_map() and vhost_vdpa_pa_unmap()
vdpa: Add an opaque pointer for vdpa_config_ops.dma_map()
vhost-iotlb: Add an opaque pointer for vhost IOTLB
vhost-vdpa: Handle the failure of vdpa_reset()
vdpa: Add reset callback in vdpa_config_ops
vdpa: Fix some coding style issues
file: Export receive_fd() to modules
eventfd: Export eventfd_wake_count to modules
iova: Export alloc_iova_fast() and free_iova_fast()
virtio-blk: remove unneeded "likely" statements
virtio-balloon: Use virtio_find_vqs() helper
vdpa: Make use of PFN_PHYS/PFN_UP/PFN_DOWN helper macro
vsock_test: update message bounds test for MSG_EOR
af_vsock: rename variables in receive loop
virtio/vsock: support MSG_EOR bit processing
vhost/vsock: support MSG_EOR bit processing
...
- Disable fw_devlinks on x86 DT platforms to fix OLPC
- More replacing oneOf+const with enum on a few new schemas
- Drop unnecessary type references on Xilinx SPI binding schema
-----BEGIN PGP SIGNATURE-----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=a8nQ
-----END PGP SIGNATURE-----
Merge tag 'devicetree-fixes-for-5.15-1' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull devicetree fixes from Rob Herring:
- Disable fw_devlinks on x86 DT platforms to fix OLPC
- More replacing oneOf+const with enum on a few new schemas
- Drop unnecessary type references on Xilinx SPI binding schema
* tag 'devicetree-fixes-for-5.15-1' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
spi: dt-bindings: xilinx: Drop type reference on *-bits properties
dt-bindings: More use 'enum' instead of 'oneOf' plus 'const' entries
of: property: Disable fw_devlink DT support for X86
Subsystem:
- Switch to Neri and Schneider time conversion algorithm
Drivers:
- rx8025: add rx8035 support
- s5m: modernize driver and set range
-----BEGIN PGP SIGNATURE-----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=480a
-----END PGP SIGNATURE-----
Merge tag 'rtc-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux
Pull RTC updates from Alexandre Belloni:
"The broken down time conversion is similar to what is done in the time
subsystem since v5.14. The rest is fairly straightforward.
Subsystem:
- Switch to Neri and Schneider time conversion algorithm
Drivers:
- rx8025: add rx8035 support
- s5m: modernize driver and set range"
* tag 'rtc-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux:
rtc: rx8010: select REGMAP_I2C
dt-bindings: rtc: add Epson RX-8025 and RX-8035
rtc: rx8025: implement RX-8035 support
rtc: cmos: remove stale REVISIT comments
rtc: tps65910: Correct driver module alias
rtc: move RTC_LIB_KUNIT_TEST to proper location
rtc: lib_test: add MODULE_LICENSE
rtc: Improve performance of rtc_time64_to_tm(). Add tests.
rtc: s5m: set range
rtc: s5m: enable wakeup only when available
rtc: s5m: signal the core when alarm are not available
rtc: s5m: switch to devm_rtc_allocate_device
The changes this time around are mostly janitorial in nature. A lot of
this is simplifications of drivers using device-managed functions and
improving compilation coverage.
The Mediatek display PWM driver now supports the atomic API.
Cleanups and minor fixes make up the remainder of this set.
-----BEGIN PGP SIGNATURE-----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=yTrZ
-----END PGP SIGNATURE-----
Merge tag 'pwm/for-5.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm
Pull pwm updates from Thierry Reding:
"The changes this time around are mostly janitorial in nature. A lot of
this is simplifications of drivers using device-managed functions and
improving compilation coverage.
The Mediatek display PWM driver now supports the atomic API.
Cleanups and minor fixes make up the remainder of this set"
* tag 'pwm/for-5.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm: (54 commits)
pwm: mtk-disp: Implement atomic API .get_state()
pwm: mtk-disp: Fix overflow in period and duty calculation
pwm: mtk-disp: Implement atomic API .apply()
pwm: mtk-disp: Adjust the clocks to avoid them mismatch
dt-bindings: pwm: rockchip: Add description for rk3568
pwm: Make pwmchip_remove() return void
pwm: sun4i: Don't check the return code of pwmchip_remove()
pwm: sifive: Don't check the return code of pwmchip_remove()
pwm: samsung: Don't check the return code of pwmchip_remove()
pwm: renesas-tpu: Don't check the return code of pwmchip_remove()
pwm: rcar: Don't check the return code of pwmchip_remove()
pwm: pca9685: Don't check the return code of pwmchip_remove()
pwm: omap-dmtimer: Don't check the return code of pwmchip_remove()
pwm: mtk-disp: Don't check the return code of pwmchip_remove()
pwm: imx-tpm: Don't check the return code of pwmchip_remove()
pwm: img: Don't check the return code of pwmchip_remove()
pwm: cros-ec: Don't check the return code of pwmchip_remove()
pwm: brcmstb: Don't check the return code of pwmchip_remove()
pwm: atmel-tcb: Don't check the return code of pwmchip_remove()
pwm: atmel-hlcdc: Don't check the return code of pwmchip_remove()
...
tegra by adding a dependency on ARCH_TEGRA along with COMPILE_TEST
(Dmitry Osipenko)
- Fix the error code for the exynos when devm_get_clk() fails (Dan
Carpenter)
- Add the TCC cooling support for AlderLake platform (Sumeet Pawnikar)
- Add support for hardware trip points for the rcar gen3 thermal
driver and store TSC id as unsigned int (Niklas Söderlund)
- Replace the deprecated CPU-hotplug functions get_online_cpus() and
put_online_cpus (Sebastian Andrzej Siewior)
- Add the thermal tools directory in the MAINTAINERS file (Daniel
Lezcano)
- Fix the Makefile and the cross compilation flags for the userspace
'tmon' tool (Rolf Eike Beer)
- Allow to use the IMOK independently from the GDDV on Int340x (Sumeet
Pawnikar)
- Fix the stub thermal_cooling_device_register() function prototype
which does not match the real function (Arnd Bergmann)
- Make the thermal trip point optional in the DT bindings (Maxime
Ripard)
- Fix a typo in a comment in the core code (Geert Uytterhoeven)
- Reduce the verbosity of the trace in the SoC thermal tegra driver
(Dmitry Osipenko)
- Add the support for the LMh (Limit Management hardware) driver on
the QCom platforms (Thara Gopinath)
- Allow processing of HWP interrupt by adding a weak function in the
Intel driver (Srinivas Pandruvada)
- Prevent an abort of the sensor probe is a channel is not used
(Matthias Kaehlcke)
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEGn3N4YVz0WNVyHskqDIjiipP6E8FAmE7yAcACgkQqDIjiipP
6E8WKwgAmI+kdOURCz1CtCIv6FnQFx20suxZidfATPULBPZ8zcHqdjxJECXJpvDz
y8T8dGAPRqXmMBJm2vF/qVraHaDJvscHXaflhsurhyEp0tiGptNeugBosso0jDEQ
JFrQ6Rny/NCmNMOkWW4YlSfkik0zQ43xlHocy3UfOKfcshhYWGsPTbIXdA6wH/zh
3tFW8j327tkyenrKZiaioJOSX88Oyy7Ft8l5k0HP+hPYkrvihWDJuEfEEmpfkdA7
Q70Lacf2QtFP8mUfGKpQxURSgndjphDPU7tzP5NqqWvLuT94aTspvJx4ywVwK8Iv
o+jNvR33yBIs5FXXB7B1ymkNE1h8uQ==
=blIQ
-----END PGP SIGNATURE-----
Merge tag 'thermal-v5.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thermal/linux
Pull thermal updates from Daniel Lezcano:
- Add the tegra3 thermal sensor and fix the compilation testing on
tegra by adding a dependency on ARCH_TEGRA along with COMPILE_TEST
(Dmitry Osipenko)
- Fix the error code for the exynos when devm_get_clk() fails (Dan
Carpenter)
- Add the TCC cooling support for AlderLake platform (Sumeet Pawnikar)
- Add support for hardware trip points for the rcar gen3 thermal driver
and store TSC id as unsigned int (Niklas Söderlund)
- Replace the deprecated CPU-hotplug functions get_online_cpus() and
put_online_cpus (Sebastian Andrzej Siewior)
- Add the thermal tools directory in the MAINTAINERS file (Daniel
Lezcano)
- Fix the Makefile and the cross compilation flags for the userspace
'tmon' tool (Rolf Eike Beer)
- Allow to use the IMOK independently from the GDDV on Int340x (Sumeet
Pawnikar)
- Fix the stub thermal_cooling_device_register() function prototype
which does not match the real function (Arnd Bergmann)
- Make the thermal trip point optional in the DT bindings (Maxime
Ripard)
- Fix a typo in a comment in the core code (Geert Uytterhoeven)
- Reduce the verbosity of the trace in the SoC thermal tegra driver
(Dmitry Osipenko)
- Add the support for the LMh (Limit Management hardware) driver on the
QCom platforms (Thara Gopinath)
- Allow processing of HWP interrupt by adding a weak function in the
Intel driver (Srinivas Pandruvada)
- Prevent an abort of the sensor probe is a channel is not used
(Matthias Kaehlcke)
* tag 'thermal-v5.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thermal/linux:
thermal/drivers/qcom/spmi-adc-tm5: Don't abort probing if a sensor is not used
thermal/drivers/intel: Allow processing of HWP interrupt
dt-bindings: thermal: Add dt binding for QCOM LMh
thermal/drivers/qcom: Add support for LMh driver
firmware: qcom_scm: Introduce SCM calls to access LMh
thermal/drivers/tegra-soctherm: Silence message about clamped temperature
thermal: Spelling s/scallbacks/callbacks/
dt-bindings: thermal: Make trips node optional
thermal/core: Fix thermal_cooling_device_register() prototype
thermal/drivers/int340x: Use IMOK independently
tools/thermal/tmon: Add cross compiling support
thermal/tools/tmon: Improve the Makefile
MAINTAINERS: Add missing userspace thermal tools to the thermal section
thermal/drivers/intel_powerclamp: Replace deprecated CPU-hotplug functions.
thermal/drivers/rcar_gen3_thermal: Store TSC id as unsigned int
thermal/drivers/rcar_gen3_thermal: Add support for hardware trip points
drivers/thermal/intel: Add TCC cooling support for AlderLake platform
thermal/drivers/exynos: Fix an error code in exynos_tmu_probe()
thermal/drivers/tegra: Correct compile-testing of drivers
thermal/drivers/tegra: Add driver for Tegra30 thermal sensor
Pull input updates from Dmitry Torokhov:
- several device tree bindings for input devices have been converted to
yaml
- dropped no longer used ixp4xx-beeper and CSR Prima2 PWRC drivers
- analog joystick has been converted to use ktime API and no longer
warn about low resolution timers
- a few driver fixes
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (24 commits)
Input: analog - always use ktime functions
Input: mms114 - support MMS134S
Input: elan_i2c - reduce the resume time for controller in Whitebox
Input: edt-ft5x06 - added case for EDT EP0110M09
Input: adc-keys - drop bogus __refdata annotation
Input: Fix spelling mistake in Kconfig "useable" -> "usable"
Input: Fix spelling mistake in Kconfig "Modul" -> "Module"
Input: remove dead CSR Prima2 PWRC driver
Input: adp5589-keys - use the right header
Input: adp5588-keys - use the right header
dt-bindings: input: tsc2005: Convert to YAML schema
Input: ep93xx_keypad - prepare clock before using it
dt-bindings: input: sun4i-lradc: Add wakeup-source
dt-bindings: input: Convert Regulator Haptic binding to a schema
dt-bindings: input: Convert Pixcir Touchscreen binding to a schema
dt-bindings: input: Convert ChipOne ICN8318 binding to a schema
Input: pm8941-pwrkey - fix comma vs semicolon issue
dt-bindings: power: reset: qcom-pon: Convert qcom PON binding to yaml
dt-bindings: input: pm8941-pwrkey: Convert pm8941 power key binding to yaml
dt-bindings: power: reset: Change 'additionalProperties' to true
...
'enum' is equivalent to 'oneOf' with a list of 'const' entries, but 'enum'
is more concise and yields better error messages.
Fix a couple more cases which have appeared.
Cc: Rob Clark <robdclark@gmail.com>
Cc: Sean Paul <sean@poorly.run>
Cc: Mark Brown <broonie@kernel.org>
Cc: Wim Van Sebroeck <wim@linux-watchdog.org>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: Jonathan Marek <jonathan@marek.ca>
Cc: Aswath Govindraju <a-govindraju@ti.com>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: dri-devel@lists.freedesktop.org
Cc: freedreno@lists.freedesktop.org
Cc: linux-spi@vger.kernel.org
Cc: linux-watchdog@vger.kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20210910165153.2843871-1-robh@kernel.org
A collection of small fixes that have been gathered before rc1,
including a few regression fixes for the problem in the previous
pull request.
-----BEGIN PGP SIGNATURE-----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=eeri
-----END PGP SIGNATURE-----
Merge tag 'sound-fix-5.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"A collection of small fixes that have been gathered before rc1,
including a few regression fixes for the problem in the previous pull
request"
* tag 'sound-fix-5.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: gus: Fix repeated probe for ISA interwave card
ALSA: gus: Fix repeated probes of snd_gus_create()
ALSA: vx222: fix null-ptr-deref
ASoC: rockchip: i2s: Fix concurrency between tx/rx
ASoC: mt8195: correct the dts parsing logic about DPTX and HDMITX
ASoC: Intel: boards: Fix CONFIG_SND_SOC_SDW_MOCKUP select
ASoC: dt-bindings: fsl_rpmsg: Add compatible string for i.MX8ULP
ALSA: usb-audio: Add registration quirk for JBL Quantum 800
ASoC: rt5682: fix headset background noise when S3 state
ASoC: dt-bindings: mt8195: remove dependent headers in the example
ASoC: mediatek: SND_SOC_MT8195 should depend on ARCH_MEDIATEK
ASoC: samsung: s3c24xx_simtec: fix spelling mistake "devicec" -> "device"
ASoC: audio-graph: respawn Platform Support
ASoC: mediatek: mt8195: add MTK_PMIC_WRAP dependency
New drivers/devices
- Support for Renesas RZ/G2L dma controller
- New driver for AMD PTDMA controller
Updates:
- Big pile of idxd updates
- Updates for Altera driver, stm32-dma, dw etc
Also contains, bus_remove_return_void-5.15 to resolve dependencies
-----BEGIN PGP SIGNATURE-----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=RYbR
-----END PGP SIGNATURE-----
Merge tag 'dmaengine-5.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine
Pull dmaengine updates from Vinod Koul:
"New drivers/devices
- Support for Renesas RZ/G2L dma controller
- New driver for AMD PTDMA controller
Updates:
- Big pile of idxd updates
- Updates for Altera driver, stm32-dma, dw etc"
* tag 'dmaengine-5.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine: (83 commits)
dmaengine: sh: fix some NULL dereferences
dmaengine: sh: Fix unused initialization of pointer lmdesc
MAINTAINERS: Fix AMD PTDMA DRIVER entry
dmaengine: ptdma: remove PT_OFFSET to avoid redefnition
dmaengine: ptdma: Add debugfs entries for PTDMA
dmaengine: ptdma: register PTDMA controller as a DMA resource
dmaengine: ptdma: Initial driver for the AMD PTDMA
dmaengine: fsl-dpaa2-qdma: Fix spelling mistake "faile" -> "failed"
dmaengine: idxd: remove interrupt disable for dev_lock
dmaengine: idxd: remove interrupt disable for cmd_lock
dmaengine: idxd: fix setting up priv mode for dwq
dmaengine: xilinx_dma: Set DMA mask for coherent APIs
dmaengine: ti: k3-psil-j721e: Add entry for CSI2RX
dmaengine: sh: Add DMAC driver for RZ/G2L SoC
dmaengine: Extend the dma_slave_width for 128 bytes
dt-bindings: dma: Document RZ/G2L bindings
dmaengine: ioat: depends on !UML
dmaengine: idxd: set descriptor allocation size to threshold for swq
dmaengine: idxd: make submit failure path consistent on desc freeing
dmaengine: idxd: remove interrupt flag for completion list spinlock
...
- Add new cpufreq driver for the MediaTek MT6779 platform called
mediatek-hw along with corresponding DT bindings (Hector.Yuan).
- Add DCVS interrupt support to the qcom-cpufreq-hw driver (Thara
Gopinath).
- Make the qcom-cpufreq-hw driver set the dvfs_possible_from_any_cpu
policy flag (Taniya Das).
- Blocklist more Qualcomm platforms in cpufreq-dt-platdev (Bjorn
Andersson).
- Make the vexpress cpufreq driver set the CPUFREQ_IS_COOLING_DEV
flag (Viresh Kumar).
- Add new cpufreq driver callback to allow drivers to register
with the Energy Model in a consistent way and make several
drivers use it (Viresh Kumar).
- Change the remaining users of the .ready() cpufreq driver callback
to move the code from it elsewhere and drop it from the cpufreq
core (Viresh Kumar).
- Revert recent intel_pstate change adding HWP guaranteed performance
change notification support to it that led to problems, because
the notification in question is triggered prematurely on some
systems (Rafael Wysocki).
- Convert the OPP DT bindings to DT schema and clean them up while
at it (Rob Herring).
-----BEGIN PGP SIGNATURE-----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=WSpr
-----END PGP SIGNATURE-----
Merge tag 'pm-5.15-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull more power management updates from Rafael Wysocki:
"These are mostly ARM cpufreq driver updates, including one new
MediaTek driver that has just passed all of the reviews, with the
addition of a revert of a recent intel_pstate commit, some core
cpufreq changes and a DT-related update of the operating performance
points (OPP) support code.
Specifics:
- Add new cpufreq driver for the MediaTek MT6779 platform called
mediatek-hw along with corresponding DT bindings (Hector.Yuan).
- Add DCVS interrupt support to the qcom-cpufreq-hw driver (Thara
Gopinath).
- Make the qcom-cpufreq-hw driver set the dvfs_possible_from_any_cpu
policy flag (Taniya Das).
- Blocklist more Qualcomm platforms in cpufreq-dt-platdev (Bjorn
Andersson).
- Make the vexpress cpufreq driver set the CPUFREQ_IS_COOLING_DEV
flag (Viresh Kumar).
- Add new cpufreq driver callback to allow drivers to register with
the Energy Model in a consistent way and make several drivers use
it (Viresh Kumar).
- Change the remaining users of the .ready() cpufreq driver callback
to move the code from it elsewhere and drop it from the cpufreq
core (Viresh Kumar).
- Revert recent intel_pstate change adding HWP guaranteed performance
change notification support to it that led to problems, because the
notification in question is triggered prematurely on some systems
(Rafael Wysocki).
- Convert the OPP DT bindings to DT schema and clean them up while at
it (Rob Herring)"
* tag 'pm-5.15-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (23 commits)
Revert "cpufreq: intel_pstate: Process HWP Guaranteed change notification"
cpufreq: mediatek-hw: Add support for CPUFREQ HW
cpufreq: Add of_perf_domain_get_sharing_cpumask
dt-bindings: cpufreq: add bindings for MediaTek cpufreq HW
cpufreq: Remove ready() callback
cpufreq: sh: Remove sh_cpufreq_cpu_ready()
cpufreq: acpi: Remove acpi_cpufreq_cpu_ready()
cpufreq: qcom-hw: Set dvfs_possible_from_any_cpu cpufreq driver flag
cpufreq: blocklist more Qualcomm platforms in cpufreq-dt-platdev
cpufreq: qcom-cpufreq-hw: Add dcvs interrupt support
cpufreq: scmi: Use .register_em() to register with energy model
cpufreq: vexpress: Use .register_em() to register with energy model
cpufreq: scpi: Use .register_em() to register with energy model
dt-bindings: opp: Convert to DT schema
dt-bindings: Clean-up OPP binding node names in examples
ARM: dts: omap: Drop references to opp.txt
cpufreq: qcom-cpufreq-hw: Use .register_em() to register with energy model
cpufreq: omap: Use .register_em() to register with energy model
cpufreq: mediatek: Use .register_em() to register with energy model
cpufreq: imx6q: Use .register_em() to register with energy model
...
* pm-cpufreq:
Revert "cpufreq: intel_pstate: Process HWP Guaranteed change notification"
cpufreq: mediatek-hw: Add support for CPUFREQ HW
cpufreq: Add of_perf_domain_get_sharing_cpumask
dt-bindings: cpufreq: add bindings for MediaTek cpufreq HW
cpufreq: Remove ready() callback
cpufreq: sh: Remove sh_cpufreq_cpu_ready()
cpufreq: acpi: Remove acpi_cpufreq_cpu_ready()
cpufreq: qcom-hw: Set dvfs_possible_from_any_cpu cpufreq driver flag
cpufreq: blocklist more Qualcomm platforms in cpufreq-dt-platdev
cpufreq: qcom-cpufreq-hw: Add dcvs interrupt support
cpufreq: scmi: Use .register_em() to register with energy model
cpufreq: vexpress: Use .register_em() to register with energy model
cpufreq: scpi: Use .register_em() to register with energy model
cpufreq: qcom-cpufreq-hw: Use .register_em() to register with energy model
cpufreq: omap: Use .register_em() to register with energy model
cpufreq: mediatek: Use .register_em() to register with energy model
cpufreq: imx6q: Use .register_em() to register with energy model
cpufreq: dt: Use .register_em() to register with energy model
cpufreq: Add callback to register with energy model
cpufreq: vexpress: Set CPUFREQ_IS_COOLING_DEV flag
This moves the crash recovery worker to the freezable work queue to
avoid interaction with other drivers during suspend & resume. It fixes a
couple of typos in comments.
It adds support for handling the audio DSP on SDM660 and it fixes a race
between the Qualcomm wireless subsystem driver and the associated driver
for the RF chip.
-----BEGIN PGP SIGNATURE-----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=EX0n
-----END PGP SIGNATURE-----
Merge tag 'rproc-v5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/andersson/remoteproc
Pull remoteproc updates from Bjorn Andersson:
- move the crash recovery worker to the freezable work queue to avoid
interaction with other drivers during suspend & resume
- fix a couple of typos in comments
- add support for handling the audio DSP on SDM660
- fix a race between the Qualcomm wireless subsystem driver and the
associated driver for the RF chip
* tag 'rproc-v5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/andersson/remoteproc:
remoteproc: q6v5_pas: Add sdm660 ADSP PIL compatible
dt-bindings: remoteproc: qcom: adsp: Add SDM660 ADSP
remoteproc: use freezable workqueue for crash notifications
remoteproc: fix kernel doc for struct rproc_ops
remoteproc: fix an typo in fw_elf_get_class code comments
remoteproc: qcom: wcnss: Fix race with iris probe
- Add support for registering devices via MFD cells to Simple MFD (I2C)
- New Drivers
- Add support for Renesas Synchronization Management Unit (SMU)
- New Device Support
- Add support for N5010 to Intel M10 BMC
- Add support for Cannon Lake to Intel LPSS ACPI
- Add support for Samsung SSG{1,2} to ST-Ericsson's U8500 family
- Add support for TQMx110EB and TQMxE40x to TQ-Systems PLD TQMx86
- New Functionality
- Add support for GPIO to Intel LPC ICH
- Add support for Reset to Texas Instruments TPS65086
- Fix-ups
- Trivial, sorting, whitespace, renaming, etc; mt6360-core, db8500-prcmu-regs, tqmx86
- Device Tree fiddling; syscon, axp20x, qcom,pm8008, ti,tps65086, brcm,cru
- Use proper APIs for IRQ map resolution; ab8500-core, stmpe, tc3589x, wm8994-irq
- Pass 'supplied-from' property through axp288_fuel_gauge via swnode
- Remove unused file entry; MAINTAINERS
- Make interrupt line optional; tps65086
- Rename db8500-cpuidle driver symbol; db8500-prcmu
- Remove support for unused hardware; tqmx86
- Provide a standard LPC clock frequency for unknown boards; tqmx86
- Remove unused code; ti_am335x_tscadc
- Use of_iomap() instead of ioremap(); syscon
- Bug Fixes
- Clear GPIO IRQ resource flags when no IRQ is set; tqmx86
- Fix incorrect/misleading frequencies; db8500-prcmu
- Mitigate namespace clash with other GPIOBASE users
-----BEGIN PGP SIGNATURE-----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=7Zv8
-----END PGP SIGNATURE-----
Merge tag 'mfd-next-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd
Pull MFD updates from Lee Jones:
"Core Frameworks:
- Add support for registering devices via MFD cells to Simple MFD (I2C)
New Drivers:
- Add support for Renesas Synchronization Management Unit (SMU)
New Device Support:
- Add support for N5010 to Intel M10 BMC
- Add support for Cannon Lake to Intel LPSS ACPI
- Add support for Samsung SSG{1,2} to ST-Ericsson's U8500 family
- Add support for TQMx110EB and TQMxE40x to TQ-Systems PLD TQMx86
New Functionality:
- Add support for GPIO to Intel LPC ICH
- Add support for Reset to Texas Instruments TPS65086
Fix-ups:
- Trivial, sorting, whitespace, renaming, etc; mt6360-core, db8500-prcmu-regs, tqmx86
- Device Tree fiddling; syscon, axp20x, qcom,pm8008, ti,tps65086, brcm,cru
- Use proper APIs for IRQ map resolution; ab8500-core, stmpe, tc3589x, wm8994-irq
- Pass 'supplied-from' property through axp288_fuel_gauge via swnode
- Remove unused file entry; MAINTAINERS
- Make interrupt line optional; tps65086
- Rename db8500-cpuidle driver symbol; db8500-prcmu
- Remove support for unused hardware; tqmx86
- Provide a standard LPC clock frequency for unknown boards; tqmx86
- Remove unused code; ti_am335x_tscadc
- Use of_iomap() instead of ioremap(); syscon
Bug Fixes:
- Clear GPIO IRQ resource flags when no IRQ is set; tqmx86
- Fix incorrect/misleading frequencies; db8500-prcmu
- Mitigate namespace clash with other GPIOBASE users"
* tag 'mfd-next-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (31 commits)
mfd: lpc_sch: Rename GPIOBASE to prevent build error
mfd: syscon: Use of_iomap() instead of ioremap()
dt-bindings: mfd: Add Broadcom CRU
mfd: ti_am335x_tscadc: Delete superfluous error message
mfd: tqmx86: Assume 24MHz LPC clock for unknown boards
mfd: tqmx86: Add support for TQ-Systems DMI IDs
mfd: tqmx86: Add support for TQMx110EB and TQMxE40x
mfd: tqmx86: Fix typo in "platform"
mfd: tqmx86: Remove incorrect TQMx90UC board ID
mfd: tqmx86: Clear GPIO IRQ resource when no IRQ is set
mfd: simple-mfd-i2c: Add support for registering devices via MFD cells
mfd/cpuidle: ux500: Rename driver symbol
mfd: tps65086: Add cell entry for reset driver
mfd: tps65086: Make interrupt line optional
dt-bindings: mfd: Convert tps65086.txt to YAML
MAINTAINERS: Adjust ARM/NOMADIK/Ux500 ARCHITECTURES to file renaming
mfd: db8500-prcmu: Handle missing FW variant
mfd: db8500-prcmu: Rename register header
mfd: axp20x: Add supplied-from property to axp288_fuel_gauge cell
mfd: Don't use irq_create_mapping() to resolve a mapping
...
Pull more ARM cpufreq changes for v5.15-rc1 from Viresh Kumar:
"This adds a new cpufreq driver for Mediatek, which had been going
through reviews since last one year."
* 'cpufreq/arm/linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm:
cpufreq: mediatek-hw: Add support for CPUFREQ HW
cpufreq: Add of_perf_domain_get_sharing_cpumask
dt-bindings: cpufreq: add bindings for MediaTek cpufreq HW
CRU is a block used in e.g. Northstar devices. It can be seen in the
bcm5301x.dtsi and this binding documents its proper usage.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
This patch adds binding for virtio I2C device, it is based on
virtio-device bindings.
Acked-by: Wolfram Sang <wsa@kernel.org>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Link: https://lore.kernel.org/r/33c317b95097ce491845c697db1e8285e3ec1d41.1627362340.git.viresh.kumar@linaro.org
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Allow virtio device sub-nodes to be added to the virtio mmio or pci
nodes. The compatible property for virtio device must be of the format
"virtio,device<ID>", where ID is virtio device ID in hexadecimal format.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Link: https://lore.kernel.org/r/d8319fd18df7086b12cdcc23193c313893aa071a.1627362340.git.viresh.kumar@linaro.org
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Rob Herring <robh@kernel.org>
