817e8b51eb
698 Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
Linus Torvalds
|
52deda9551 |
Merge branch 'akpm' (patches from Andrew)
Merge more updates from Andrew Morton: "Various misc subsystems, before getting into the post-linux-next material. 41 patches. Subsystems affected by this patch series: procfs, misc, core-kernel, lib, checkpatch, init, pipe, minix, fat, cgroups, kexec, kdump, taskstats, panic, kcov, resource, and ubsan" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (41 commits) Revert "ubsan, kcsan: Don't combine sanitizer with kcov on clang" kernel/resource: fix kfree() of bootmem memory again kcov: properly handle subsequent mmap calls kcov: split ioctl handling into locked and unlocked parts panic: move panic_print before kmsg dumpers panic: add option to dump all CPUs backtraces in panic_print docs: sysctl/kernel: add missing bit to panic_print taskstats: remove unneeded dead assignment kasan: no need to unset panic_on_warn in end_report() ubsan: no need to unset panic_on_warn in ubsan_epilogue() panic: unset panic_on_warn inside panic() docs: kdump: add scp example to write out the dump file docs: kdump: update description about sysfs file system support arm64: mm: use IS_ENABLED(CONFIG_KEXEC_CORE) instead of #ifdef x86/setup: use IS_ENABLED(CONFIG_KEXEC_CORE) instead of #ifdef riscv: mm: init: use IS_ENABLED(CONFIG_KEXEC_CORE) instead of #ifdef kexec: make crashk_res, crashk_low_res and crash_notes symbols always visible cgroup: use irqsave in cgroup_rstat_flush_locked(). fat: use pointer to simple type in put_user() minix: fix bug when opening a file with O_DIRECT ... |
||
|
Linus Torvalds
|
169e77764a |
Networking changes for 5.18.
Core
----
- Introduce XDP multi-buffer support, allowing the use of XDP with
jumbo frame MTUs and combination with Rx coalescing offloads (LRO).
- Speed up netns dismantling (5x) and lower the memory cost a little.
Remove unnecessary per-netns sockets. Scope some lists to a netns.
Cut down RCU syncing. Use batch methods. Allow netdev registration
to complete out of order.
- Support distinguishing timestamp types (ingress vs egress) and
maintaining them across packet scrubbing points (e.g. redirect).
- Continue the work of annotating packet drop reasons throughout
the stack.
- Switch netdev error counters from an atomic to dynamically
allocated per-CPU counters.
- Rework a few preempt_disable(), local_irq_save() and busy waiting
sections problematic on PREEMPT_RT.
- Extend the ref_tracker to allow catching use-after-free bugs.
BPF
---
- Introduce "packing allocator" for BPF JIT images. JITed code is
marked read only, and used to be allocated at page granularity.
Custom allocator allows for more efficient memory use, lower
iTLB pressure and prevents identity mapping huge pages from
getting split.
- Make use of BTF type annotations (e.g. __user, __percpu) to enforce
the correct probe read access method, add appropriate helpers.
- Convert the BPF preload to use light skeleton and drop
the user-mode-driver dependency.
- Allow XDP BPF_PROG_RUN test infra to send real packets, enabling
its use as a packet generator.
- Allow local storage memory to be allocated with GFP_KERNEL if called
from a hook allowed to sleep.
- Introduce fprobe (multi kprobe) to speed up mass attachment (arch
bits to come later).
- Add unstable conntrack lookup helpers for BPF by using the BPF
kfunc infra.
- Allow cgroup BPF progs to return custom errors to user space.
- Add support for AF_UNIX iterator batching.
- Allow iterator programs to use sleepable helpers.
- Support JIT of add, and, or, xor and xchg atomic ops on arm64.
- Add BTFGen support to bpftool which allows to use CO-RE in kernels
without BTF info.
- Large number of libbpf API improvements, cleanups and deprecations.
Protocols
---------
- Micro-optimize UDPv6 Tx, gaining up to 5% in test on dummy netdev.
- Adjust TSO packet sizes based on min_rtt, allowing very low latency
links (data centers) to always send full-sized TSO super-frames.
- Make IPv6 flow label changes (AKA hash rethink) more configurable,
via sysctl and setsockopt. Distinguish between server and client
behavior.
- VxLAN support to "collect metadata" devices to terminate only
configured VNIs. This is similar to VLAN filtering in the bridge.
- Support inserting IPv6 IOAM information to a fraction of frames.
- Add protocol attribute to IP addresses to allow identifying where
given address comes from (kernel-generated, DHCP etc.)
- Support setting socket and IPv6 options via cmsg on ping6 sockets.
- Reject mis-use of ECN bits in IP headers as part of DSCP/TOS.
Define dscp_t and stop taking ECN bits into account in fib-rules.
- Add support for locked bridge ports (for 802.1X).
- tun: support NAPI for packets received from batched XDP buffs,
doubling the performance in some scenarios.
- IPv6 extension header handling in Open vSwitch.
- Support IPv6 control message load balancing in bonding, prevent
neighbor solicitation and advertisement from using the wrong port.
Support NS/NA monitor selection similar to existing ARP monitor.
- SMC
- improve performance with TCP_CORK and sendfile()
- support auto-corking
- support TCP_NODELAY
- MCTP (Management Component Transport Protocol)
- add user space tag control interface
- I2C binding driver (as specified by DMTF DSP0237)
- Multi-BSSID beacon handling in AP mode for WiFi.
- Bluetooth:
- handle MSFT Monitor Device Event
- add MGMT Adv Monitor Device Found/Lost events
- Multi-Path TCP:
- add support for the SO_SNDTIMEO socket option
- lots of selftest cleanups and improvements
- Increase the max PDU size in CAN ISOTP to 64 kB.
Driver API
----------
- Add HW counters for SW netdevs, a mechanism for devices which
offload packet forwarding to report packet statistics back to
software interfaces such as tunnels.
- Select the default NIC queue count as a fraction of number of
physical CPU cores, instead of hard-coding to 8.
- Expose devlink instance locks to drivers. Allow device layer of
drivers to use that lock directly instead of creating their own
which always runs into ordering issues in devlink callbacks.
- Add header/data split indication to guide user space enabling
of TCP zero-copy Rx.
- Allow configuring completion queue event size.
- Refactor page_pool to enable fragmenting after allocation.
- Add allocation and page reuse statistics to page_pool.
- Improve Multiple Spanning Trees support in the bridge to allow
reuse of topologies across VLANs, saving HW resources in switches.
- DSA (Distributed Switch Architecture):
- replay and offload of host VLAN entries
- offload of static and local FDB entries on LAG interfaces
- FDB isolation and unicast filtering
New hardware / drivers
----------------------
- Ethernet:
- LAN937x T1 PHYs
- Davicom DM9051 SPI NIC driver
- Realtek RTL8367S, RTL8367RB-VB switch and MDIO
- Microchip ksz8563 switches
- Netronome NFP3800 SmartNICs
- Fungible SmartNICs
- MediaTek MT8195 switches
- WiFi:
- mt76: MediaTek mt7916
- mt76: MediaTek mt7921u USB adapters
- brcmfmac: Broadcom BCM43454/6
- Mobile:
- iosm: Intel M.2 7360 WWAN card
Drivers
-------
- Convert many drivers to the new phylink API built for split PCS
designs but also simplifying other cases.
- Intel Ethernet NICs:
- add TTY for GNSS module for E810T device
- improve AF_XDP performance
- GTP-C and GTP-U filter offload
- QinQ VLAN support
- Mellanox Ethernet NICs (mlx5):
- support xdp->data_meta
- multi-buffer XDP
- offload tc push_eth and pop_eth actions
- Netronome Ethernet NICs (nfp):
- flow-independent tc action hardware offload (police / meter)
- AF_XDP
- Other Ethernet NICs:
- at803x: fiber and SFP support
- xgmac: mdio: preamble suppression and custom MDC frequencies
- r8169: enable ASPM L1.2 if system vendor flags it as safe
- macb/gem: ZynqMP SGMII
- hns3: add TX push mode
- dpaa2-eth: software TSO
- lan743x: multi-queue, mdio, SGMII, PTP
- axienet: NAPI and GRO support
- Mellanox Ethernet switches (mlxsw):
- source and dest IP address rewrites
- RJ45 ports
- Marvell Ethernet switches (prestera):
- basic routing offload
- multi-chain TC ACL offload
- NXP embedded Ethernet switches (ocelot & felix):
- PTP over UDP with the ocelot-8021q DSA tagging protocol
- basic QoS classification on Felix DSA switch using dcbnl
- port mirroring for ocelot switches
- Microchip high-speed industrial Ethernet (sparx5):
- offloading of bridge port flooding flags
- PTP Hardware Clock
- Other embedded switches:
- lan966x: PTP Hardward Clock
- qca8k: mdio read/write operations via crafted Ethernet packets
- Qualcomm 802.11ax WiFi (ath11k):
- add LDPC FEC type and 802.11ax High Efficiency data in radiotap
- enable RX PPDU stats in monitor co-exist mode
- Intel WiFi (iwlwifi):
- UHB TAS enablement via BIOS
- band disablement via BIOS
- channel switch offload
- 32 Rx AMPDU sessions in newer devices
- MediaTek WiFi (mt76):
- background radar detection
- thermal management improvements on mt7915
- SAR support for more mt76 platforms
- MBSSID and 6 GHz band on mt7915
- RealTek WiFi:
- rtw89: AP mode
- rtw89: 160 MHz channels and 6 GHz band
- rtw89: hardware scan
- Bluetooth:
- mt7921s: wake on Bluetooth, SCO over I2S, wide-band-speed (WBS)
- Microchip CAN (mcp251xfd):
- multiple RX-FIFOs and runtime configurable RX/TX rings
- internal PLL, runtime PM handling simplification
- improve chip detection and error handling after wakeup
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=ELpe
-----END PGP SIGNATURE-----
Merge tag 'net-next-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Jakub Kicinski:
"The sprinkling of SPI drivers is because we added a new one and Mark
sent us a SPI driver interface conversion pull request.
Core
----
- Introduce XDP multi-buffer support, allowing the use of XDP with
jumbo frame MTUs and combination with Rx coalescing offloads (LRO).
- Speed up netns dismantling (5x) and lower the memory cost a little.
Remove unnecessary per-netns sockets. Scope some lists to a netns.
Cut down RCU syncing. Use batch methods. Allow netdev registration
to complete out of order.
- Support distinguishing timestamp types (ingress vs egress) and
maintaining them across packet scrubbing points (e.g. redirect).
- Continue the work of annotating packet drop reasons throughout the
stack.
- Switch netdev error counters from an atomic to dynamically
allocated per-CPU counters.
- Rework a few preempt_disable(), local_irq_save() and busy waiting
sections problematic on PREEMPT_RT.
- Extend the ref_tracker to allow catching use-after-free bugs.
BPF
---
- Introduce "packing allocator" for BPF JIT images. JITed code is
marked read only, and used to be allocated at page granularity.
Custom allocator allows for more efficient memory use, lower iTLB
pressure and prevents identity mapping huge pages from getting
split.
- Make use of BTF type annotations (e.g. __user, __percpu) to enforce
the correct probe read access method, add appropriate helpers.
- Convert the BPF preload to use light skeleton and drop the
user-mode-driver dependency.
- Allow XDP BPF_PROG_RUN test infra to send real packets, enabling
its use as a packet generator.
- Allow local storage memory to be allocated with GFP_KERNEL if
called from a hook allowed to sleep.
- Introduce fprobe (multi kprobe) to speed up mass attachment (arch
bits to come later).
- Add unstable conntrack lookup helpers for BPF by using the BPF
kfunc infra.
- Allow cgroup BPF progs to return custom errors to user space.
- Add support for AF_UNIX iterator batching.
- Allow iterator programs to use sleepable helpers.
- Support JIT of add, and, or, xor and xchg atomic ops on arm64.
- Add BTFGen support to bpftool which allows to use CO-RE in kernels
without BTF info.
- Large number of libbpf API improvements, cleanups and deprecations.
Protocols
---------
- Micro-optimize UDPv6 Tx, gaining up to 5% in test on dummy netdev.
- Adjust TSO packet sizes based on min_rtt, allowing very low latency
links (data centers) to always send full-sized TSO super-frames.
- Make IPv6 flow label changes (AKA hash rethink) more configurable,
via sysctl and setsockopt. Distinguish between server and client
behavior.
- VxLAN support to "collect metadata" devices to terminate only
configured VNIs. This is similar to VLAN filtering in the bridge.
- Support inserting IPv6 IOAM information to a fraction of frames.
- Add protocol attribute to IP addresses to allow identifying where
given address comes from (kernel-generated, DHCP etc.)
- Support setting socket and IPv6 options via cmsg on ping6 sockets.
- Reject mis-use of ECN bits in IP headers as part of DSCP/TOS.
Define dscp_t and stop taking ECN bits into account in fib-rules.
- Add support for locked bridge ports (for 802.1X).
- tun: support NAPI for packets received from batched XDP buffs,
doubling the performance in some scenarios.
- IPv6 extension header handling in Open vSwitch.
- Support IPv6 control message load balancing in bonding, prevent
neighbor solicitation and advertisement from using the wrong port.
Support NS/NA monitor selection similar to existing ARP monitor.
- SMC
- improve performance with TCP_CORK and sendfile()
- support auto-corking
- support TCP_NODELAY
- MCTP (Management Component Transport Protocol)
- add user space tag control interface
- I2C binding driver (as specified by DMTF DSP0237)
- Multi-BSSID beacon handling in AP mode for WiFi.
- Bluetooth:
- handle MSFT Monitor Device Event
- add MGMT Adv Monitor Device Found/Lost events
- Multi-Path TCP:
- add support for the SO_SNDTIMEO socket option
- lots of selftest cleanups and improvements
- Increase the max PDU size in CAN ISOTP to 64 kB.
Driver API
----------
- Add HW counters for SW netdevs, a mechanism for devices which
offload packet forwarding to report packet statistics back to
software interfaces such as tunnels.
- Select the default NIC queue count as a fraction of number of
physical CPU cores, instead of hard-coding to 8.
- Expose devlink instance locks to drivers. Allow device layer of
drivers to use that lock directly instead of creating their own
which always runs into ordering issues in devlink callbacks.
- Add header/data split indication to guide user space enabling of
TCP zero-copy Rx.
- Allow configuring completion queue event size.
- Refactor page_pool to enable fragmenting after allocation.
- Add allocation and page reuse statistics to page_pool.
- Improve Multiple Spanning Trees support in the bridge to allow
reuse of topologies across VLANs, saving HW resources in switches.
- DSA (Distributed Switch Architecture):
- replay and offload of host VLAN entries
- offload of static and local FDB entries on LAG interfaces
- FDB isolation and unicast filtering
New hardware / drivers
----------------------
- Ethernet:
- LAN937x T1 PHYs
- Davicom DM9051 SPI NIC driver
- Realtek RTL8367S, RTL8367RB-VB switch and MDIO
- Microchip ksz8563 switches
- Netronome NFP3800 SmartNICs
- Fungible SmartNICs
- MediaTek MT8195 switches
- WiFi:
- mt76: MediaTek mt7916
- mt76: MediaTek mt7921u USB adapters
- brcmfmac: Broadcom BCM43454/6
- Mobile:
- iosm: Intel M.2 7360 WWAN card
Drivers
-------
- Convert many drivers to the new phylink API built for split PCS
designs but also simplifying other cases.
- Intel Ethernet NICs:
- add TTY for GNSS module for E810T device
- improve AF_XDP performance
- GTP-C and GTP-U filter offload
- QinQ VLAN support
- Mellanox Ethernet NICs (mlx5):
- support xdp->data_meta
- multi-buffer XDP
- offload tc push_eth and pop_eth actions
- Netronome Ethernet NICs (nfp):
- flow-independent tc action hardware offload (police / meter)
- AF_XDP
- Other Ethernet NICs:
- at803x: fiber and SFP support
- xgmac: mdio: preamble suppression and custom MDC frequencies
- r8169: enable ASPM L1.2 if system vendor flags it as safe
- macb/gem: ZynqMP SGMII
- hns3: add TX push mode
- dpaa2-eth: software TSO
- lan743x: multi-queue, mdio, SGMII, PTP
- axienet: NAPI and GRO support
- Mellanox Ethernet switches (mlxsw):
- source and dest IP address rewrites
- RJ45 ports
- Marvell Ethernet switches (prestera):
- basic routing offload
- multi-chain TC ACL offload
- NXP embedded Ethernet switches (ocelot & felix):
- PTP over UDP with the ocelot-8021q DSA tagging protocol
- basic QoS classification on Felix DSA switch using dcbnl
- port mirroring for ocelot switches
- Microchip high-speed industrial Ethernet (sparx5):
- offloading of bridge port flooding flags
- PTP Hardware Clock
- Other embedded switches:
- lan966x: PTP Hardward Clock
- qca8k: mdio read/write operations via crafted Ethernet packets
- Qualcomm 802.11ax WiFi (ath11k):
- add LDPC FEC type and 802.11ax High Efficiency data in radiotap
- enable RX PPDU stats in monitor co-exist mode
- Intel WiFi (iwlwifi):
- UHB TAS enablement via BIOS
- band disablement via BIOS
- channel switch offload
- 32 Rx AMPDU sessions in newer devices
- MediaTek WiFi (mt76):
- background radar detection
- thermal management improvements on mt7915
- SAR support for more mt76 platforms
- MBSSID and 6 GHz band on mt7915
- RealTek WiFi:
- rtw89: AP mode
- rtw89: 160 MHz channels and 6 GHz band
- rtw89: hardware scan
- Bluetooth:
- mt7921s: wake on Bluetooth, SCO over I2S, wide-band-speed (WBS)
- Microchip CAN (mcp251xfd):
- multiple RX-FIFOs and runtime configurable RX/TX rings
- internal PLL, runtime PM handling simplification
- improve chip detection and error handling after wakeup"
* tag 'net-next-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2521 commits)
llc: fix netdevice reference leaks in llc_ui_bind()
drivers: ethernet: cpsw: fix panic when interrupt coaleceing is set via ethtool
ice: don't allow to run ice_send_event_to_aux() in atomic ctx
ice: fix 'scheduling while atomic' on aux critical err interrupt
net/sched: fix incorrect vlan_push_eth dest field
net: bridge: mst: Restrict info size queries to bridge ports
net: marvell: prestera: add missing destroy_workqueue() in prestera_module_init()
drivers: net: xgene: Fix regression in CRC stripping
net: geneve: add missing netlink policy and size for IFLA_GENEVE_INNER_PROTO_INHERIT
net: dsa: fix missing host-filtered multicast addresses
net/mlx5e: Fix build warning, detected write beyond size of field
iwlwifi: mvm: Don't fail if PPAG isn't supported
selftests/bpf: Fix kprobe_multi test.
Revert "rethook: x86: Add rethook x86 implementation"
Revert "arm64: rethook: Add arm64 rethook implementation"
Revert "powerpc: Add rethook support"
Revert "ARM: rethook: Add rethook arm implementation"
netdevice: add missing dm_private kdoc
net: bridge: mst: prevent NULL deref in br_mst_info_size()
selftests: forwarding: Use same VRF for port and VLAN upper
...
|
||
Randy Dunlap
|
f9a40b0890 |
init/main.c: return 1 from handled __setup() functions
initcall_blacklist() should return 1 to indicate that it handled its cmdline arguments. set_debug_rodata() should return 1 to indicate that it handled its cmdline arguments. Print a warning if the option string is invalid. This prevents these strings from being added to the 'init' program's environment as they are not init arguments/parameters. Link: https://lkml.kernel.org/r/20220221050901.23985-1-rdunlap@infradead.org Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Reported-by: Igor Zhbanov <i.zhbanov@omprussia.ru> Cc: Ingo Molnar <mingo@kernel.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
Mark-PK Tsai
|
105e8c2e47 |
init: use ktime_us_delta() to make initcall_debug log more precise
Use ktime_us_delta() to make the initcall_debug log more precise than right shifting the result of ktime_to_ns() by 10 bits. Link: https://lkml.kernel.org/r/20220209053350.15771-1-mark-pk.tsai@mediatek.com Signed-off-by: Mark-PK Tsai <mark-pk.tsai@mediatek.com> Reviewed-by: Andrew Halaney <ahalaney@redhat.com> Tested-by: Andrew Halaney <ahalaney@redhat.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Matthias Brugger <matthias.bgg@gmail.com> Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Kefeng Wang <wangkefeng.wang@huawei.com> Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk> Cc: Kees Cook <keescook@chromium.org> Cc: Valentin Schneider <valentin.schneider@arm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: YJ Chiang <yj.chiang@mediatek.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
Marco Elver
|
8cb37a5974 |
stack: Introduce CONFIG_RANDOMIZE_KSTACK_OFFSET
The randomize_kstack_offset feature is unconditionally compiled in when the architecture supports it. To add constraints on compiler versions, we require a dedicated Kconfig variable. Therefore, introduce RANDOMIZE_KSTACK_OFFSET. Furthermore, this option is now also configurable by EXPERT kernels: while the feature is supposed to have zero performance overhead when disabled, due to its use of static branches, there are few cases where giving a distribution the option to disable the feature entirely makes sense. For example, in very resource constrained environments, which would never enable the feature to begin with, in which case the additional kernel code size increase would be redundant. Signed-off-by: Marco Elver <elver@google.com> Reviewed-by: Nathan Chancellor <nathan@kernel.org> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Kees Cook <keescook@chromium.org> Signed-off-by: Kees Cook <keescook@chromium.org> Link: https://lore.kernel.org/r/20220131090521.1947110-1-elver@google.com |
||
Eric Dumazet
|
9c1be1935f |
net: initialize init_net earlier
While testing a patch that will follow later
("net: add netns refcount tracker to struct nsproxy")
I found that devtmpfs_init() was called before init_net
was initialized.
This is a bug, because devtmpfs_setup() calls
ksys_unshare(CLONE_NEWNS);
This has the effect of increasing init_net refcount,
which will be later overwritten to 1, as part of setup_net(&init_net)
We had too many prior patches [1] trying to work around the root cause.
Really, make sure init_net is in BSS section, and that net_ns_init()
is called earlier at boot time.
Note that another patch ("vfs: add netns refcount tracker
to struct fs_context") also will need net_ns_init() being called
before vfs_caches_init()
As a bonus, this patch saves around 4KB in .data section.
[1]
|
||
Vlastimil Babka
|
2dba5eb1c7 |
lib/stackdepot: allow optional init and stack_table allocation by kvmalloc()
Currently, enabling CONFIG_STACKDEPOT means its stack_table will be allocated from memblock, even if stack depot ends up not actually used. The default size of stack_table is 4MB on 32-bit, 8MB on 64-bit. This is fine for use-cases such as KASAN which is also a config option and has overhead on its own. But it's an issue for functionality that has to be actually enabled on boot (page_owner) or depends on hardware (GPU drivers) and thus the memory might be wasted. This was raised as an issue [1] when attempting to add stackdepot support for SLUB's debug object tracking functionality. It's common to build kernels with CONFIG_SLUB_DEBUG and enable slub_debug on boot only when needed, or create only specific kmem caches with debugging for testing purposes. It would thus be more efficient if stackdepot's table was allocated only when actually going to be used. This patch thus makes the allocation (and whole stack_depot_init() call) optional: - Add a CONFIG_STACKDEPOT_ALWAYS_INIT flag to keep using the current well-defined point of allocation as part of mem_init(). Make CONFIG_KASAN select this flag. - Other users have to call stack_depot_init() as part of their own init when it's determined that stack depot will actually be used. This may depend on both config and runtime conditions. Convert current users which are page_owner and several in the DRM subsystem. Same will be done for SLUB later. - Because the init might now be called after the boot-time memblock allocation has given all memory to the buddy allocator, change stack_depot_init() to allocate stack_table with kvmalloc() when memblock is no longer available. Also handle allocation failure by disabling stackdepot (could have theoretically happened even with memblock allocation previously), and don't unnecessarily align the memblock allocation to its own size anymore. [1] https://lore.kernel.org/all/CAMuHMdW=eoVzM1Re5FVoEN87nKfiLmM2+Ah7eNu2KXEhCvbZyA@mail.gmail.com/ Link: https://lkml.kernel.org/r/20211013073005.11351-1-vbabka@suse.cz Signed-off-by: Vlastimil Babka <vbabka@suse.cz> Acked-by: Dmitry Vyukov <dvyukov@google.com> Reviewed-by: Marco Elver <elver@google.com> # stackdepot Cc: Marco Elver <elver@google.com> Cc: Vijayanand Jitta <vjitta@codeaurora.org> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Maxime Ripard <mripard@kernel.org> Cc: Thomas Zimmermann <tzimmermann@suse.de> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com> Cc: Alexander Potapenko <glider@google.com> Cc: Andrey Konovalov <andreyknvl@gmail.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Oliver Glitta <glittao@gmail.com> Cc: Imran Khan <imran.f.khan@oracle.com> From: Colin Ian King <colin.king@canonical.com> Subject: lib/stackdepot: fix spelling mistake and grammar in pr_err message There is a spelling mistake of the work allocation so fix this and re-phrase the message to make it easier to read. Link: https://lkml.kernel.org/r/20211015104159.11282-1-colin.king@canonical.com Signed-off-by: Colin Ian King <colin.king@canonical.com> Cc: Vlastimil Babka <vbabka@suse.cz> From: Vlastimil Babka <vbabka@suse.cz> Subject: lib/stackdepot: allow optional init and stack_table allocation by kvmalloc() - fixup On FLATMEM, we call page_ext_init_flatmem_late() just before kmem_cache_init() which means stack_depot_init() (called by page owner init) will not recognize properly it should use kvmalloc() and not memblock_alloc(). memblock_alloc() will also not issue a warning and return a block memory that can be invalid and cause kernel page fault when saving stacks, as reported by the kernel test robot [1]. Fix this by moving page_ext_init_flatmem_late() below kmem_cache_init() so that slab_is_available() is true during stack_depot_init(). SPARSEMEM doesn't have this issue, as it doesn't do page_ext_init_flatmem_late(), but a different page_ext_init() even later in the boot process. Thanks to Mike Rapoport for pointing out the FLATMEM init ordering issue. While at it, also actually resolve a checkpatch warning in stack_depot_init() from DRM CI, which was supposed to be in the original patch already. [1] https://lore.kernel.org/all/20211014085450.GC18719@xsang-OptiPlex-9020/ Link: https://lkml.kernel.org/r/6abd9213-19a9-6d58-cedc-2414386d2d81@suse.cz Signed-off-by: Vlastimil Babka <vbabka@suse.cz> Reported-by: kernel test robot <oliver.sang@intel.com> Cc: Mike Rapoport <rppt@kernel.org> Cc: Stephen Rothwell <sfr@canb.auug.org.au> From: Vlastimil Babka <vbabka@suse.cz> Subject: lib/stackdepot: allow optional init and stack_table allocation by kvmalloc() - fixup3 Due to |
||
|
Linus Torvalds
|
59a2ceeef6 |
Merge branch 'akpm' (patches from Andrew)
Merge more updates from Andrew Morton: "87 patches. Subsystems affected by this patch series: mm (pagecache and hugetlb), procfs, misc, MAINTAINERS, lib, checkpatch, binfmt, kallsyms, ramfs, init, codafs, nilfs2, hfs, crash_dump, signals, seq_file, fork, sysvfs, kcov, gdb, resource, selftests, and ipc" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (87 commits) ipc/ipc_sysctl.c: remove fallback for !CONFIG_PROC_SYSCTL ipc: check checkpoint_restore_ns_capable() to modify C/R proc files selftests/kselftest/runner/run_one(): allow running non-executable files virtio-mem: disallow mapping virtio-mem memory via /dev/mem kernel/resource: disallow access to exclusive system RAM regions kernel/resource: clean up and optimize iomem_is_exclusive() scripts/gdb: handle split debug for vmlinux kcov: replace local_irq_save() with a local_lock_t kcov: avoid enable+disable interrupts if !in_task() kcov: allocate per-CPU memory on the relevant node Documentation/kcov: define `ip' in the example Documentation/kcov: include types.h in the example sysv: use BUILD_BUG_ON instead of runtime check kernel/fork.c: unshare(): use swap() to make code cleaner seq_file: fix passing wrong private data seq_file: move seq_escape() to a header signal: remove duplicate include in signal.h crash_dump: remove duplicate include in crash_dump.h crash_dump: fix boolreturn.cocci warning hfs/hfsplus: use WARN_ON for sanity check ... |
||
Andrew Halaney
|
8bc2b3dca7 |
init: make unknown command line param message clearer
The prior message is confusing users, which is the exact opposite of the
goal. If the message is being seen, one of the following situations is
happening:
1. the param is misspelled
2. the param is not valid due to the kernel configuration
3. the param is intended for init but isn't after the '--'
delineator on the command line
To make that more clear to the user, explicitly mention "kernel command
line" and also note that the params are still passed to user space to
avoid causing any alarm over params intended for init.
Link: https://lkml.kernel.org/r/20211013223502.96756-1-ahalaney@redhat.com
Fixes:
|
||
|
Linus Torvalds
|
512b7931ad |
Merge branch 'akpm' (patches from Andrew)
Merge misc updates from Andrew Morton: "257 patches. Subsystems affected by this patch series: scripts, ocfs2, vfs, and mm (slab-generic, slab, slub, kconfig, dax, kasan, debug, pagecache, gup, swap, memcg, pagemap, mprotect, mremap, iomap, tracing, vmalloc, pagealloc, memory-failure, hugetlb, userfaultfd, vmscan, tools, memblock, oom-kill, hugetlbfs, migration, thp, readahead, nommu, ksm, vmstat, madvise, memory-hotplug, rmap, zsmalloc, highmem, zram, cleanups, kfence, and damon)" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (257 commits) mm/damon: remove return value from before_terminate callback mm/damon: fix a few spelling mistakes in comments and a pr_debug message mm/damon: simplify stop mechanism Docs/admin-guide/mm/pagemap: wordsmith page flags descriptions Docs/admin-guide/mm/damon/start: simplify the content Docs/admin-guide/mm/damon/start: fix a wrong link Docs/admin-guide/mm/damon/start: fix wrong example commands mm/damon/dbgfs: add adaptive_targets list check before enable monitor_on mm/damon: remove unnecessary variable initialization Documentation/admin-guide/mm/damon: add a document for DAMON_RECLAIM mm/damon: introduce DAMON-based Reclamation (DAMON_RECLAIM) selftests/damon: support watermarks mm/damon/dbgfs: support watermarks mm/damon/schemes: activate schemes based on a watermarks mechanism tools/selftests/damon: update for regions prioritization of schemes mm/damon/dbgfs: support prioritization weights mm/damon/vaddr,paddr: support pageout prioritization mm/damon/schemes: prioritize regions within the quotas mm/damon/selftests: support schemes quotas mm/damon/dbgfs: support quotas of schemes ... |
||
Mike Rapoport
|
4421cca0a3 |
memblock: use memblock_free for freeing virtual pointers
Rename memblock_free_ptr() to memblock_free() and use memblock_free()
when freeing a virtual pointer so that memblock_free() will be a
counterpart of memblock_alloc()
The callers are updated with the below semantic patch and manual
addition of (void *) casting to pointers that are represented by
unsigned long variables.
@@
identifier vaddr;
expression size;
@@
(
- memblock_phys_free(__pa(vaddr), size);
+ memblock_free(vaddr, size);
|
- memblock_free_ptr(vaddr, size);
+ memblock_free(vaddr, size);
)
[sfr@canb.auug.org.au: fixup]
Link: https://lkml.kernel.org/r/20211018192940.3d1d532f@canb.auug.org.au
Link: https://lkml.kernel.org/r/20210930185031.18648-7-rppt@kernel.org
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Juergen Gross <jgross@suse.com>
Cc: Shahab Vahedi <Shahab.Vahedi@synopsys.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
||
Christophe Leroy
|
d2635f2012 |
mm: create a new system state and fix core_kernel_text()
core_kernel_text() considers that until system_state in at least SYSTEM_RUNNING, init memory is valid. But init memory is freed a few lines before setting SYSTEM_RUNNING, so we have a small period of time when core_kernel_text() is wrong. Create an intermediate system state called SYSTEM_FREEING_INIT that is set before starting freeing init memory, and use it in core_kernel_text() to report init memory invalid earlier. Link: https://lkml.kernel.org/r/9ecfdee7dd4d741d172cb93ff1d87f1c58127c9a.1633001016.git.christophe.leroy@csgroup.eu Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Cc: Gerald Schaefer <gerald.schaefer@linux.ibm.com> Cc: Kefeng Wang <wangkefeng.wang@huawei.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@ozlabs.org> Cc: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Linus Torvalds
|
79ef0c0014 |
Tracing updates for 5.16:
- kprobes: Restructured stack unwinder to show properly on x86 when a stack dump happens from a kretprobe callback. - Fix to bootconfig parsing - Have tracefs allow owner and group permissions by default (only denying others). There's been pressure to allow non root to tracefs in a controlled fashion, and using groups is probably the safest. - Bootconfig memory managament updates. - Bootconfig clean up to have the tools directory be less dependent on changes in the kernel tree. - Allow perf to be traced by function tracer. - Rewrite of function graph tracer to be a callback from the function tracer instead of having its own trampoline (this change will happen on an arch by arch basis, and currently only x86_64 implements it). - Allow multiple direct trampolines (bpf hooks to functions) be batched together in one synchronization. - Allow histogram triggers to add variables that can perform calculations against the event's fields. - Use the linker to determine architecture callbacks from the ftrace trampoline to allow for proper parameter prototypes and prevent warnings from the compiler. - Extend histogram triggers to key off of variables. - Have trace recursion use bit magic to determine preempt context over if branches. - Have trace recursion disable preemption as all use cases do anyway. - Added testing for verification of tracing utilities. - Various small clean ups and fixes. -----BEGIN PGP SIGNATURE----- iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCYYBdxhQccm9zdGVkdEBn b29kbWlzLm9yZwAKCRAp5XQQmuv6qp1sAQD2oYFwaG3sx872gj/myBcHIBSKdiki Hry5csd8zYDBpgD+Poylopt5JIbeDuoYw/BedgEXmscZ8Qr7VzjAXdnv/Q4= =Loz8 -----END PGP SIGNATURE----- Merge tag 'trace-v5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace Pull tracing updates from Steven Rostedt: - kprobes: Restructured stack unwinder to show properly on x86 when a stack dump happens from a kretprobe callback. - Fix to bootconfig parsing - Have tracefs allow owner and group permissions by default (only denying others). There's been pressure to allow non root to tracefs in a controlled fashion, and using groups is probably the safest. - Bootconfig memory managament updates. - Bootconfig clean up to have the tools directory be less dependent on changes in the kernel tree. - Allow perf to be traced by function tracer. - Rewrite of function graph tracer to be a callback from the function tracer instead of having its own trampoline (this change will happen on an arch by arch basis, and currently only x86_64 implements it). - Allow multiple direct trampolines (bpf hooks to functions) be batched together in one synchronization. - Allow histogram triggers to add variables that can perform calculations against the event's fields. - Use the linker to determine architecture callbacks from the ftrace trampoline to allow for proper parameter prototypes and prevent warnings from the compiler. - Extend histogram triggers to key off of variables. - Have trace recursion use bit magic to determine preempt context over if branches. - Have trace recursion disable preemption as all use cases do anyway. - Added testing for verification of tracing utilities. - Various small clean ups and fixes. * tag 'trace-v5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: (101 commits) tracing/histogram: Fix semicolon.cocci warnings tracing/histogram: Fix documentation inline emphasis warning tracing: Increase PERF_MAX_TRACE_SIZE to handle Sentinel1 and docker together tracing: Show size of requested perf buffer bootconfig: Initialize ret in xbc_parse_tree() ftrace: do CPU checking after preemption disabled ftrace: disable preemption when recursion locked tracing/histogram: Document expression arithmetic and constants tracing/histogram: Optimize division by a power of 2 tracing/histogram: Covert expr to const if both operands are constants tracing/histogram: Simplify handling of .sym-offset in expressions tracing: Fix operator precedence for hist triggers expression tracing: Add division and multiplication support for hist triggers tracing: Add support for creating hist trigger variables from literal selftests/ftrace: Stop tracing while reading the trace file by default MAINTAINERS: Update KPROBES and TRACING entries test_kprobes: Move it from kernel/ to lib/ docs, kprobes: Remove invalid URL and add new reference samples/kretprobes: Fix return value if register_kretprobe() failed lib/bootconfig: Fix the xbc_get_info kerneldoc ... |
||
Christoph Hellwig
|
2e9bc3465a |
block: move elevator.h to block/
Except for the features passed to blk_queue_required_elevator_features, elevator.h is only needed internally to the block layer. Move the ELEVATOR_F_* definitions to blkdev.h, and the move elevator.h to block/, dropping all the spurious includes outside of that. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Link: https://lore.kernel.org/r/20210920123328.1399408-13-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk> |
||
Masami Hiramatsu
|
1ae43851b1 |
bootconfig: init: Fix memblock leak in xbc_make_cmdline()
Free unused memblock in a error case to fix memblock leak
in xbc_make_cmdline().
Link: https://lkml.kernel.org/r/163177339181.682366.8713781325929549256.stgit@devnote2
Fixes:
|
||
|
Masami Hiramatsu
|
115d4d08ae |
bootconfig: Rename xbc_destroy_all() to xbc_exit()
Avoid using this noisy name and use more calm one. This is just a name change. No functional change. Link: https://lkml.kernel.org/r/163187295918.2366983.5231840238429996027.stgit@devnote2 Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org> |
||
|
Masami Hiramatsu
|
e306220cb7 |
bootconfig: Add xbc_get_info() for the node information
Add xbc_get_info() API which allows user to get the number of used xbc_nodes and the size of bootconfig data. This is also useful for checking the bootconfig is initialized or not. Link: https://lkml.kernel.org/r/163177340877.682366.4360676589783197627.stgit@devnote2 Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org> |
||
|
Masami Hiramatsu
|
bdac5c2b24 |
bootconfig: Allocate xbc_data inside xbc_init()
Allocate 'xbc_data' in the xbc_init() so that it does not need to care about the ownership of the copied data. Link: https://lkml.kernel.org/r/163177339986.682366.898762699429769117.stgit@devnote2 Suggested-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org> |
||
Geert Uytterhoeven
|
58e2cf5d79 |
init: Revert accidental changes to print irqs_disabled()
Commit |
||
|
Linus Torvalds
|
77e02cf57b |
memblock: introduce saner 'memblock_free_ptr()' interface
The boot-time allocation interface for memblock is a mess, with
'memblock_alloc()' returning a virtual pointer, but then you are
supposed to free it with 'memblock_free()' that takes a _physical_
address.
Not only is that all kinds of strange and illogical, but it actually
causes bugs, when people then use it like a normal allocation function,
and it fails spectacularly on a NULL pointer:
https://lore.kernel.org/all/20210912140820.GD25450@xsang-OptiPlex-9020/
or just random memory corruption if the debug checks don't catch it:
https://lore.kernel.org/all/61ab2d0c-3313-aaab-514c-e15b7aa054a0@suse.cz/
I really don't want to apply patches that treat the symptoms, when the
fundamental cause is this horribly confusing interface.
I started out looking at just automating a sane replacement sequence,
but because of this mix or virtual and physical addresses, and because
people have used the "__pa()" macro that can take either a regular
kernel pointer, or just the raw "unsigned long" address, it's all quite
messy.
So this just introduces a new saner interface for freeing a virtual
address that was allocated using 'memblock_alloc()', and that was kept
as a regular kernel pointer. And then it converts a couple of users
that are obvious and easy to test, including the 'xbc_nodes' case in
lib/bootconfig.c that caused problems.
Reported-by: kernel test robot <oliver.sang@intel.com>
Fixes:
|
||
|
Linus Torvalds
|
43175623dd |
More tracing updates for 5.15:
- Add migrate-disable counter to tracing header - Fix error handling in event probes - Fix missed unlock in osnoise in error path - Fix merge issue with tools/bootconfig - Clean up bootconfig data when init memory is removed - Fix bootconfig to loop only on subkeys - Have kernel command lines override bootconfig options - Increase field counts for synthetic events - Have histograms dynamic allocate event elements to save space - Fixes in testing and documentation -----BEGIN PGP SIGNATURE----- iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCYToFZBQccm9zdGVkdEBn b29kbWlzLm9yZwAKCRAp5XQQmuv6qtg5AP44U3Dn1m1lQo3y1DJ9kUP3HsAsDofS Cv7ZM9tLV2p4MQEA9KJc3/B/5BZEK1kso3uLeLT+WxJOC4YStXY19WwmjAI= =Wuo+ -----END PGP SIGNATURE----- Merge tag 'trace-v5.15-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace Pull more tracing updates from Steven Rostedt: - Add migrate-disable counter to tracing header - Fix error handling in event probes - Fix missed unlock in osnoise in error path - Fix merge issue with tools/bootconfig - Clean up bootconfig data when init memory is removed - Fix bootconfig to loop only on subkeys - Have kernel command lines override bootconfig options - Increase field counts for synthetic events - Have histograms dynamic allocate event elements to save space - Fixes in testing and documentation * tag 'trace-v5.15-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: tracing/boot: Fix to loop on only subkeys selftests/ftrace: Exclude "(fault)" in testing add/remove eprobe events tracing: Dynamically allocate the per-elt hist_elt_data array tracing: synth events: increase max fields count tools/bootconfig: Show whole test command for each test case bootconfig: Fix missing return check of xbc_node_compose_key function tools/bootconfig: Fix tracing_on option checking in ftrace2bconf.sh docs: bootconfig: Add how to use bootconfig for kernel parameters init/bootconfig: Reorder init parameter from bootconfig and cmdline init: bootconfig: Remove all bootconfig data when the init memory is removed tracing/osnoise: Fix missed cpus_read_unlock() in start_per_cpu_kthreads() tracing: Fix some alloc_event_probe() error handling bugs tracing: Add migrate-disabled counter to tracing output. |
||
|
Linus Torvalds
|
2d338201d5 |
Merge branch 'akpm' (patches from Andrew)
Merge more updates from Andrew Morton:
"147 patches, based on
|
||
|
Masami Hiramatsu
|
b66fbbe8d4 |
init/bootconfig: Reorder init parameter from bootconfig and cmdline
Reorder the init parameters from bootconfig and kernel cmdline so that the kernel cmdline always be the last part of the parameters as below. " -- "[bootconfig init params][cmdline init params] This change will help us to prevent that bootconfig init params overwrite the init params which user gives in the command line. Link: https://lkml.kernel.org/r/163077085675.222577.5665176468023636160.stgit@devnote2 Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org> |
||
|
Masami Hiramatsu
|
40caa127f3 |
init: bootconfig: Remove all bootconfig data when the init memory is removed
Since the bootconfig is used only in the init functions, it doesn't need to keep the data after boot. Free it when the init memory is removed. Link: https://lkml.kernel.org/r/163077084958.222577.5924961258513004428.stgit@devnote2 Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org> |
||
Kefeng Wang
|
8b097881b5 |
trap: cleanup trap_init()
There are some empty trap_init() definitions in different ARCHs, Introduce a new weak trap_init() function to clean them up. Link: https://lkml.kernel.org/r/20210812123602.76356-1-wangkefeng.wang@huawei.com Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com> Acked-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> [arm32] Acked-by: Vineet Gupta [arc] Acked-by: Michael Ellerman <mpe@ellerman.id.au> [powerpc] Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Cc: Ley Foon Tan <ley.foon.tan@intel.com> Cc: Jonas Bonn <jonas@southpole.se> Cc: Stefan Kristiansson <stefan.kristiansson@saunalahti.fi> Cc: Stafford Horne <shorne@gmail.com> Cc: James E.J. Bottomley <James.Bottomley@HansenPartnership.com> Cc: Helge Deller <deller@gmx.de> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Paul Walmsley <palmerdabbelt@google.com> Cc: Jeff Dike <jdike@addtoit.com> Cc: Richard Weinberger <richard@nod.at> Cc: Anton Ivanov <anton.ivanov@cambridgegreys.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
Rasmus Villemoes
|
b234ed6d62 |
init: move usermodehelper_enable() to populate_rootfs()
Currently, usermodehelper is enabled right before PID1 starts going through the initcalls. However, any call of a usermodehelper from a pure_, core_, postcore_, arch_, subsys_ or fs_ initcall is futile, as there is no filesystem contents yet. Up until commit |
||
Jakub Kicinski
|
f444fea789 |
Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
drivers/ptp/Kconfig: |
||
|
Masami Hiramatsu
|
d0ac5fbaf7 |
init: Suppress wrong warning for bootconfig cmdline parameter
Since the 'bootconfig' command line parameter is handled before
parsing the command line, it doesn't use early_param(). But in
this case, kernel shows a wrong warning message about it.
[ 0.013714] Kernel command line: ro console=ttyS0 bootconfig console=tty0
[ 0.013741] Unknown command line parameters: bootconfig
To suppress this message, add a dummy handler for 'bootconfig'.
Link: https://lkml.kernel.org/r/162812945097.77369.1849780946468010448.stgit@devnote2
Fixes:
|
||
Michael Schmitz
|
f8ade8dddb |
xsurf100: drop include of lib8390.c
Now that ax88796.c exports the ax_NS8390_reinit() symbol, we can
include 8390.h instead of lib8390.c, avoiding duplication of that
function and killing a few compile warnings in the bargain.
Fixes:
|
||
Stephen Boyd
|
83cc6fa004 |
buildid: stash away kernels build ID on init
Parse the kernel's build ID at initialization so that other code can print a hex format string representation of the running kernel's build ID. This will be used in the kdump and dump_stack code so that developers can easily locate the vmlinux debug symbols for a crash/stacktrace. [swboyd@chromium.org: fix implicit declaration of init_vmlinux_build_id()] Link: https://lkml.kernel.org/r/CAE-0n51UjTbay8N9FXAyE7_aR2+ePrQnKSRJ0gbmRsXtcLBVaw@mail.gmail.com Link: https://lkml.kernel.org/r/20210511003845.2429846-4-swboyd@chromium.org Signed-off-by: Stephen Boyd <swboyd@chromium.org> Acked-by: Baoquan He <bhe@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Jessica Yu <jeyu@kernel.org> Cc: Evan Green <evgreen@chromium.org> Cc: Hsin-Yi Wang <hsinyi@chromium.org> Cc: Dave Young <dyoung@redhat.com> Cc: Vivek Goyal <vgoyal@redhat.com> Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Cc: Matthew Wilcox <willy@infradead.org> Cc: Petr Mladek <pmladek@suse.com> Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk> Cc: Sasha Levin <sashal@kernel.org> Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Will Deacon <will@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Linus Torvalds
|
28e92f9903 |
Merge branch 'core-rcu-2021.07.04' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu
Pull RCU updates from Paul McKenney: - Bitmap parsing support for "all" as an alias for all bits - Documentation updates - Miscellaneous fixes, including some that overlap into mm and lockdep - kvfree_rcu() updates - mem_dump_obj() updates, with acks from one of the slab-allocator maintainers - RCU NOCB CPU updates, including limited deoffloading - SRCU updates - Tasks-RCU updates - Torture-test updates * 'core-rcu-2021.07.04' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu: (78 commits) tasks-rcu: Make show_rcu_tasks_gp_kthreads() be static inline rcu-tasks: Make ksoftirqd provide RCU Tasks quiescent states rcu: Add missing __releases() annotation rcu: Remove obsolete rcu_read_unlock() deadlock commentary rcu: Improve comments describing RCU read-side critical sections rcu: Create an unrcu_pointer() to remove __rcu from a pointer srcu: Early test SRCU polling start rcu: Fix various typos in comments rcu/nocb: Unify timers rcu/nocb: Prepare for fine-grained deferred wakeup rcu/nocb: Only cancel nocb timer if not polling rcu/nocb: Delete bypass_timer upon nocb_gp wakeup rcu/nocb: Cancel nocb_timer upon nocb_gp wakeup rcu/nocb: Allow de-offloading rdp leader rcu/nocb: Directly call __wake_nocb_gp() from bypass timer rcu: Don't penalize priority boosting when there is nothing to boost rcu: Point to documentation of ordering guarantees rcu: Make rcu_gp_cleanup() be noinline for tracing rcu: Restrict RCU_STRICT_GRACE_PERIOD to at most four CPUs rcu: Make show_rcu_gp_kthreads() dump rcu_node structures blocking GP ... |
||
|
Linus Torvalds
|
757fa80f4e |
Tracing updates for 5.14:
- Added option for per CPU threads to the hwlat tracer
- Have hwlat tracer handle hotplug CPUs
- New tracer: osnoise, that detects latency caused by interrupts, softirqs
and scheduling of other tasks.
- Added timerlat tracer that creates a thread and measures in detail what
sources of latency it has for wake ups.
- Removed the "success" field of the sched_wakeup trace event.
This has been hardcoded as "1" since 2015, no tooling should be looking
at it now. If one exists, we can revert this commit, fix that tool and
try to remove it again in the future.
- tgid mapping fixed to handle more than PID_MAX_DEFAULT pids/tgids.
- New boot command line option "tp_printk_stop", as tp_printk causes trace
events to write to console. When user space starts, this can easily live
lock the system. Having a boot option to stop just after boot up is
useful to prevent that from happening.
- Have ftrace_dump_on_oops boot command line option take numbers that match
the numbers shown in /proc/sys/kernel/ftrace_dump_on_oops.
- Bootconfig clean ups, fixes and enhancements.
- New ktest script that tests bootconfig options.
- Add tracepoint_probe_register_may_exist() to register a tracepoint
without triggering a WARN*() if it already exists. BPF has a path from
user space that can do this. All other paths are considered a bug.
- Small clean ups and fixes
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCYN8YPhQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qhxLAP9Mo5hHv7Hg6W7Ddv77rThm+qclsMR/
yW0P+eJpMm4+xAD8Cq03oE1DimPK+9WZBKU5rSqAkqG6CjgDRw6NlIszzQQ=
=WEPR
-----END PGP SIGNATURE-----
Merge tag 'trace-v5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing updates from Steven Rostedt:
- Added option for per CPU threads to the hwlat tracer
- Have hwlat tracer handle hotplug CPUs
- New tracer: osnoise, that detects latency caused by interrupts,
softirqs and scheduling of other tasks.
- Added timerlat tracer that creates a thread and measures in detail
what sources of latency it has for wake ups.
- Removed the "success" field of the sched_wakeup trace event. This has
been hardcoded as "1" since 2015, no tooling should be looking at it
now. If one exists, we can revert this commit, fix that tool and try
to remove it again in the future.
- tgid mapping fixed to handle more than PID_MAX_DEFAULT pids/tgids.
- New boot command line option "tp_printk_stop", as tp_printk causes
trace events to write to console. When user space starts, this can
easily live lock the system. Having a boot option to stop just after
boot up is useful to prevent that from happening.
- Have ftrace_dump_on_oops boot command line option take numbers that
match the numbers shown in /proc/sys/kernel/ftrace_dump_on_oops.
- Bootconfig clean ups, fixes and enhancements.
- New ktest script that tests bootconfig options.
- Add tracepoint_probe_register_may_exist() to register a tracepoint
without triggering a WARN*() if it already exists. BPF has a path
from user space that can do this. All other paths are considered a
bug.
- Small clean ups and fixes
* tag 'trace-v5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: (49 commits)
tracing: Resize tgid_map to pid_max, not PID_MAX_DEFAULT
tracing: Simplify & fix saved_tgids logic
treewide: Add missing semicolons to __assign_str uses
tracing: Change variable type as bool for clean-up
trace/timerlat: Fix indentation on timerlat_main()
trace/osnoise: Make 'noise' variable s64 in run_osnoise()
tracepoint: Add tracepoint_probe_register_may_exist() for BPF tracing
tracing: Fix spelling in osnoise tracer "interferences" -> "interference"
Documentation: Fix a typo on trace/osnoise-tracer
trace/osnoise: Fix return value on osnoise_init_hotplug_support
trace/osnoise: Make interval u64 on osnoise_main
trace/osnoise: Fix 'no previous prototype' warnings
tracing: Have osnoise_main() add a quiescent state for task rcu
seq_buf: Make trace_seq_putmem_hex() support data longer than 8
seq_buf: Fix overflow in seq_buf_putmem_hex()
trace/osnoise: Support hotplug operations
trace/hwlat: Support hotplug operations
trace/hwlat: Protect kdata->kthread with get/put_online_cpus
trace: Add timerlat tracer
trace: Add osnoise tracer
...
|
||
|
Linus Torvalds
|
71bd934101 |
Merge branch 'akpm' (patches from Andrew)
Merge more updates from Andrew Morton: "190 patches. Subsystems affected by this patch series: mm (hugetlb, userfaultfd, vmscan, kconfig, proc, z3fold, zbud, ras, mempolicy, memblock, migration, thp, nommu, kconfig, madvise, memory-hotplug, zswap, zsmalloc, zram, cleanups, kfence, and hmm), procfs, sysctl, misc, core-kernel, lib, lz4, checkpatch, init, kprobes, nilfs2, hfs, signals, exec, kcov, selftests, compress/decompress, and ipc" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (190 commits) ipc/util.c: use binary search for max_idx ipc/sem.c: use READ_ONCE()/WRITE_ONCE() for use_global_lock ipc: use kmalloc for msg_queue and shmid_kernel ipc sem: use kvmalloc for sem_undo allocation lib/decompressors: remove set but not used variabled 'level' selftests/vm/pkeys: exercise x86 XSAVE init state selftests/vm/pkeys: refill shadow register after implicit kernel write selftests/vm/pkeys: handle negative sys_pkey_alloc() return code selftests/vm/pkeys: fix alloc_random_pkey() to make it really, really random kcov: add __no_sanitize_coverage to fix noinstr for all architectures exec: remove checks in __register_bimfmt() x86: signal: don't do sas_ss_reset() until we are certain that sigframe won't be abandoned hfsplus: report create_date to kstat.btime hfsplus: remove unnecessary oom message nilfs2: remove redundant continue statement in a while-loop kprobes: remove duplicated strong free_insn_page in x86 and s390 init: print out unknown kernel parameters checkpatch: do not complain about positive return values starting with EPOLL checkpatch: improve the indented label test checkpatch: scripts/spdxcheck.py now requires python3 ... |
||
|
Andrew Halaney
|
86d1919a4f |
init: print out unknown kernel parameters
It is easy to foobar setting a kernel parameter on the command line without realizing it, there's not much output that you can use to assess what the kernel did with that parameter by default. Make it a little more explicit which parameters on the command line _looked_ like a valid parameter for the kernel, but did not match anything and ultimately got tossed to init. This is very similar to the unknown parameter message received when loading a module. This assumes the parameters are processed in a normal fashion, some parameters (dyndbg= for example) don't register their parameter with the rest of the kernel's parameters, and therefore always show up in this list (and are also given to init - like the rest of this list). Another example is BOOT_IMAGE= is highlighted as an offender, which it technically is, but is passed by LILO and GRUB so most systems will see that complaint. An example output where "foobared" and "unrecognized" are intentionally invalid parameters: Kernel command line: BOOT_IMAGE=/boot/vmlinuz-5.12-dirty debug log_buf_len=4M foobared unrecognized=foo Unknown command line parameters: foobared BOOT_IMAGE=/boot/vmlinuz-5.12-dirty unrecognized=foo Link: https://lkml.kernel.org/r/20210511211009.42259-1-ahalaney@redhat.com Signed-off-by: Andrew Halaney <ahalaney@redhat.com> Suggested-by: Steven Rostedt <rostedt@goodmis.org> Suggested-by: Borislav Petkov <bp@suse.de> Acked-by: Borislav Petkov <bp@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
Ingo Molnar
|
b2c0931a07 |
Merge branch 'sched/urgent' into sched/core, to resolve conflicts
This commit in sched/urgent moved the cfs_rq_is_decayed() function: |
||
|
Masami Hiramatsu
|
99f4f5d623 |
bootconfig: Share the checksum function with tools
Move the checksum calculation function into the header for sharing it with tools/bootconfig. Link: https://lkml.kernel.org/r/162262197470.264090.16325743685807878807.stgit@devnote2 Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org> |
||
Mark Rutland
|
0711f0d705 |
pid: take a reference when initializing cad_pid
During boot, kernel_init_freeable() initializes `cad_pid` to the init task's struct pid. Later on, we may change `cad_pid` via a sysctl, and when this happens proc_do_cad_pid() will increment the refcount on the new pid via get_pid(), and will decrement the refcount on the old pid via put_pid(). As we never called get_pid() when we initialized `cad_pid`, we decrement a reference we never incremented, can therefore free the init task's struct pid early. As there can be dangling references to the struct pid, we can later encounter a use-after-free (e.g. when delivering signals). This was spotted when fuzzing v5.13-rc3 with Syzkaller, but seems to have been around since the conversion of `cad_pid` to struct pid in commit |
||
Peter Zijlstra
|
15faafc6b4 |
sched,init: Fix DEBUG_PREEMPT vs early boot
Extend |
||
Valentin Schneider
|
f1a0a376ca |
sched/core: Initialize the idle task with preemption disabled
As pointed out by commit
|
||
Frederic Weisbecker
|
8e9c01c717 |
srcu: Initialize SRCU after timers
Once srcu_init() is called, the SRCU core will make use of delayed workqueues, which rely on timers. However init_timers() is called several steps after rcu_init(). This means that a call_srcu() after rcu_init() but before init_timers() would find itself within a dangerously uninitialized timer core. This commit therefore creates a separate call to srcu_init() after init_timer() completes, which ensures that we stay in early SRCU mode until timers are safe(r). Signed-off-by: Frederic Weisbecker <frederic@kernel.org> Cc: Uladzislau Rezki <urezki@gmail.com> Cc: Boqun Feng <boqun.feng@gmail.com> Cc: Lai Jiangshan <jiangshanlai@gmail.com> Cc: Neeraj Upadhyay <neeraju@codeaurora.org> Cc: Josh Triplett <josh@joshtriplett.org> Cc: Joel Fernandes <joel@joelfernandes.org> Signed-off-by: Paul E. McKenney <paulmck@kernel.org> |
||
|
Linus Torvalds
|
a48b0872e6 |
Merge branch 'akpm' (patches from Andrew)
Merge yet more updates from Andrew Morton: "This is everything else from -mm for this merge window. 90 patches. Subsystems affected by this patch series: mm (cleanups and slub), alpha, procfs, sysctl, misc, core-kernel, bitmap, lib, compat, checkpatch, epoll, isofs, nilfs2, hpfs, exit, fork, kexec, gcov, panic, delayacct, gdb, resource, selftests, async, initramfs, ipc, drivers/char, and spelling" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (90 commits) mm: fix typos in comments mm: fix typos in comments treewide: remove editor modelines and cruft ipc/sem.c: spelling fix fs: fat: fix spelling typo of values kernel/sys.c: fix typo kernel/up.c: fix typo kernel/user_namespace.c: fix typos kernel/umh.c: fix some spelling mistakes include/linux/pgtable.h: few spelling fixes mm/slab.c: fix spelling mistake "disired" -> "desired" scripts/spelling.txt: add "overflw" scripts/spelling.txt: Add "diabled" typo scripts/spelling.txt: add "overlfow" arm: print alloc free paths for address in registers mm/vmalloc: remove vwrite() mm: remove xlate_dev_kmem_ptr() drivers/char: remove /dev/kmem for good mm: fix some typos and code style problems ipc/sem.c: mundane typo fixes ... |
||
|
Rasmus Villemoes
|
e7cb072eb9 |
init/initramfs.c: do unpacking asynchronously
Patch series "background initramfs unpacking, and CONFIG_MODPROBE_PATH", v3. These two patches are independent, but better-together. The second is a rather trivial patch that simply allows the developer to change "/sbin/modprobe" to something else - e.g. the empty string, so that all request_module() during early boot return -ENOENT early, without even spawning a usermode helper, needlessly synchronizing with the initramfs unpacking. The first patch delegates decompressing the initramfs to a worker thread, allowing do_initcalls() in main.c to proceed to the device_ and late_ initcalls without waiting for that decompression (and populating of rootfs) to finish. Obviously, some of those later calls may rely on the initramfs being available, so I've added synchronization points in the firmware loader and usermodehelper paths - there might be other places that would need this, but so far no one has been able to think of any places I have missed. There's not much to win if most of the functionality needed during boot is only available as modules. But systems with a custom-made .config and initramfs can boot faster, partly due to utilizing more than one cpu earlier, partly by avoiding known-futile modprobe calls (which would still trigger synchronization with the initramfs unpacking, thus eliminating most of the first benefit). This patch (of 2): Most of the boot process doesn't actually need anything from the initramfs, until of course PID1 is to be executed. So instead of doing the decompressing and populating of the initramfs synchronously in populate_rootfs() itself, push that off to a worker thread. This is primarily motivated by an embedded ppc target, where unpacking even the rather modest sized initramfs takes 0.6 seconds, which is long enough that the external watchdog becomes unhappy that it doesn't get attention soon enough. By doing the initramfs decompression in a worker thread, we get to do the device_initcalls and hence start petting the watchdog much sooner. Normal desktops might benefit as well. On my mostly stock Ubuntu kernel, my initramfs is a 26M xz-compressed blob, decompressing to around 126M. That takes almost two seconds: [ 0.201454] Trying to unpack rootfs image as initramfs... [ 1.976633] Freeing initrd memory: 29416K Before this patch, these lines occur consecutively in dmesg. With this patch, the timestamps on these two lines is roughly the same as above, but with 172 lines inbetween - so more than one cpu has been kept busy doing work that would otherwise only happen after the populate_rootfs() finished. Should one of the initcalls done after rootfs_initcall time (i.e., device_ and late_ initcalls) need something from the initramfs (say, a kernel module or a firmware blob), it will simply wait for the initramfs unpacking to be done before proceeding, which should in theory make this completely safe. But if some driver pokes around in the filesystem directly and not via one of the official kernel interfaces (i.e. request_firmware*(), call_usermodehelper*) that theory may not hold - also, I certainly might have missed a spot when sprinkling wait_for_initramfs(). So there is an escape hatch in the form of an initramfs_async= command line parameter. Link: https://lkml.kernel.org/r/20210313212528.2956377-1-linux@rasmusvillemoes.dk Link: https://lkml.kernel.org/r/20210313212528.2956377-2-linux@rasmusvillemoes.dk Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Reviewed-by: Luis Chamberlain <mcgrof@kernel.org> Cc: Jessica Yu <jeyu@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Nick Desaulniers <ndesaulniers@google.com> Cc: Takashi Iwai <tiwai@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Linus Torvalds
|
9b1f61d5d7 |
tracing updates for 5.13
New feature:
The "func-no-repeats" option in tracefs/options directory. When set
the function tracer will detect if the current function being traced
is the same as the previous one, and instead of recording it, it will
keep track of the number of times that the function is repeated in a row.
And when another function is recorded, it will write a new event that
shows the function that repeated, the number of times it repeated and
the time stamp of when the last repeated function occurred.
Enhancements:
In order to implement the above "func-no-repeats" option, the ring
buffer timestamp can now give the accurate timestamp of the event
as it is being recorded, instead of having to record an absolute
timestamp for all events. This helps the histogram code which no longer
needs to waste ring buffer space.
New validation logic to make sure all trace events that access
dereferenced pointers do so in a safe way, and will warn otherwise.
Fixes:
No longer limit the PIDs of tasks that are recorded for "saved_cmdlines"
to PID_MAX_DEFAULT (32768), as systemd now allows for a much larger
range. This caused the mapping of PIDs to the task names to be dropped
for all tasks with a PID greater than 32768.
Change trace_clock_global() to never block. This caused a deadlock.
Clean ups:
Typos, prototype fixes, and removing of duplicate or unused code.
Better management of ftrace_page allocations.
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCYI/1vBQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qiL0AP9EemIC5TDh2oihqLRNeUjdTu0ryEoM
HRFqxozSF985twD/bfkt86KQC8rLHwxTbxQZ863bmdaC6cMGFhWiF+H/MAs=
=psYt
-----END PGP SIGNATURE-----
Merge tag 'trace-v5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing updates from Steven Rostedt:
"New feature:
- A new "func-no-repeats" option in tracefs/options directory.
When set the function tracer will detect if the current function
being traced is the same as the previous one, and instead of
recording it, it will keep track of the number of times that the
function is repeated in a row. And when another function is
recorded, it will write a new event that shows the function that
repeated, the number of times it repeated and the time stamp of
when the last repeated function occurred.
Enhancements:
- In order to implement the above "func-no-repeats" option, the ring
buffer timestamp can now give the accurate timestamp of the event
as it is being recorded, instead of having to record an absolute
timestamp for all events. This helps the histogram code which no
longer needs to waste ring buffer space.
- New validation logic to make sure all trace events that access
dereferenced pointers do so in a safe way, and will warn otherwise.
Fixes:
- No longer limit the PIDs of tasks that are recorded for
"saved_cmdlines" to PID_MAX_DEFAULT (32768), as systemd now allows
for a much larger range. This caused the mapping of PIDs to the
task names to be dropped for all tasks with a PID greater than
32768.
- Change trace_clock_global() to never block. This caused a deadlock.
Clean ups:
- Typos, prototype fixes, and removing of duplicate or unused code.
- Better management of ftrace_page allocations"
* tag 'trace-v5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: (32 commits)
tracing: Restructure trace_clock_global() to never block
tracing: Map all PIDs to command lines
ftrace: Reuse the output of the function tracer for func_repeats
tracing: Add "func_no_repeats" option for function tracing
tracing: Unify the logic for function tracing options
tracing: Add method for recording "func_repeats" events
tracing: Add "last_func_repeats" to struct trace_array
tracing: Define new ftrace event "func_repeats"
tracing: Define static void trace_print_time()
ftrace: Simplify the calculation of page number for ftrace_page->records some more
ftrace: Store the order of pages allocated in ftrace_page
tracing: Remove unused argument from "ring_buffer_time_stamp()
tracing: Remove duplicate struct declaration in trace_events.h
tracing: Update create_system_filter() kernel-doc comment
tracing: A minor cleanup for create_system_filter()
kernel: trace: Mundane typo fixes in the file trace_events_filter.c
tracing: Fix various typos in comments
scripts/recordmcount.pl: Make vim and emacs indent the same
scripts/recordmcount.pl: Make indent spacing consistent
tracing: Add a verifier to check string pointers for trace events
...
|
||
|
Kefeng Wang
|
1f9d03c5e9 |
mm: move mem_init_print_info() into mm_init()
mem_init_print_info() is called in mem_init() on each architecture, and pass NULL argument, so using void argument and move it into mm_init(). Link: https://lkml.kernel.org/r/20210317015210.33641-1-wangkefeng.wang@huawei.com Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com> Acked-by: Dave Hansen <dave.hansen@linux.intel.com> [x86] Reviewed-by: Christophe Leroy <christophe.leroy@c-s.fr> [powerpc] Acked-by: David Hildenbrand <david@redhat.com> Tested-by: Anatoly Pugachev <matorola@gmail.com> [sparc64] Acked-by: Russell King <rmk+kernel@armlinux.org.uk> [arm] Acked-by: Mike Rapoport <rppt@linux.ibm.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Richard Henderson <rth@twiddle.net> Cc: Guo Ren <guoren@kernel.org> Cc: Yoshinori Sato <ysato@users.osdn.me> Cc: Huacai Chen <chenhuacai@kernel.org> Cc: Jonas Bonn <jonas@southpole.se> Cc: Palmer Dabbelt <palmer@dabbelt.com> Cc: Heiko Carstens <hca@linux.ibm.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: "Peter Zijlstra" <peterz@infradead.org> Cc: Ingo Molnar <mingo@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
Nicholas Piggin
|
bbc180a5ad |
mm: HUGE_VMAP arch support cleanup
This changes the awkward approach where architectures provide init functions to determine which levels they can provide large mappings for, to one where the arch is queried for each call. This removes code and indirection, and allows constant-folding of dead code for unsupported levels. This also adds a prot argument to the arch query. This is unused currently but could help with some architectures (e.g., some powerpc processors can't map uncacheable memory with large pages). Link: https://lkml.kernel.org/r/20210317062402.533919-7-npiggin@gmail.com Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Reviewed-by: Ding Tianhong <dingtianhong@huawei.com> Acked-by: Catalin Marinas <catalin.marinas@arm.com> [arm64] Cc: Will Deacon <will@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: Borislav Petkov <bp@alien8.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Miaohe Lin <linmiaohe@huawei.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Russell King <linux@armlinux.org.uk> Cc: Uladzislau Rezki (Sony) <urezki@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
Kees Cook
|
39218ff4c6 |
stack: Optionally randomize kernel stack offset each syscall
This provides the ability for architectures to enable kernel stack base address offset randomization. This feature is controlled by the boot param "randomize_kstack_offset=on/off", with its default value set by CONFIG_RANDOMIZE_KSTACK_OFFSET_DEFAULT. This feature is based on the original idea from the last public release of PaX's RANDKSTACK feature: https://pax.grsecurity.net/docs/randkstack.txt All the credit for the original idea goes to the PaX team. Note that the design and implementation of this upstream randomize_kstack_offset feature differs greatly from the RANDKSTACK feature (see below). Reasoning for the feature: This feature aims to make harder the various stack-based attacks that rely on deterministic stack structure. We have had many such attacks in past (just to name few): https://jon.oberheide.org/files/infiltrate12-thestackisback.pdf https://jon.oberheide.org/files/stackjacking-infiltrate11.pdf https://googleprojectzero.blogspot.com/2016/06/exploiting-recursion-in-linux-kernel_20.html As Linux kernel stack protections have been constantly improving (vmap-based stack allocation with guard pages, removal of thread_info, STACKLEAK), attackers have had to find new ways for their exploits to work. They have done so, continuing to rely on the kernel's stack determinism, in situations where VMAP_STACK and THREAD_INFO_IN_TASK_STRUCT were not relevant. For example, the following recent attacks would have been hampered if the stack offset was non-deterministic between syscalls: https://repositorio-aberto.up.pt/bitstream/10216/125357/2/374717.pdf (page 70: targeting the pt_regs copy with linear stack overflow) https://a13xp0p0v.github.io/2020/02/15/CVE-2019-18683.html (leaked stack address from one syscall as a target during next syscall) The main idea is that since the stack offset is randomized on each system call, it is harder for an attack to reliably land in any particular place on the thread stack, even with address exposures, as the stack base will change on the next syscall. Also, since randomization is performed after placing pt_regs, the ptrace-based approach[1] to discover the randomized offset during a long-running syscall should not be possible. Design description: During most of the kernel's execution, it runs on the "thread stack", which is pretty deterministic in its structure: it is fixed in size, and on every entry from userspace to kernel on a syscall the thread stack starts construction from an address fetched from the per-cpu cpu_current_top_of_stack variable. The first element to be pushed to the thread stack is the pt_regs struct that stores all required CPU registers and syscall parameters. Finally the specific syscall function is called, with the stack being used as the kernel executes the resulting request. The goal of randomize_kstack_offset feature is to add a random offset after the pt_regs has been pushed to the stack and before the rest of the thread stack is used during the syscall processing, and to change it every time a process issues a syscall. The source of randomness is currently architecture-defined (but x86 is using the low byte of rdtsc()). Future improvements for different entropy sources is possible, but out of scope for this patch. Further more, to add more unpredictability, new offsets are chosen at the end of syscalls (the timing of which should be less easy to measure from userspace than at syscall entry time), and stored in a per-CPU variable, so that the life of the value does not stay explicitly tied to a single task. As suggested by Andy Lutomirski, the offset is added using alloca() and an empty asm() statement with an output constraint, since it avoids changes to assembly syscall entry code, to the unwinder, and provides correct stack alignment as defined by the compiler. In order to make this available by default with zero performance impact for those that don't want it, it is boot-time selectable with static branches. This way, if the overhead is not wanted, it can just be left turned off with no performance impact. The generated assembly for x86_64 with GCC looks like this: ... ffffffff81003977: 65 8b 05 02 ea 00 7f mov %gs:0x7f00ea02(%rip),%eax # 12380 <kstack_offset> ffffffff8100397e: 25 ff 03 00 00 and $0x3ff,%eax ffffffff81003983: 48 83 c0 0f add $0xf,%rax ffffffff81003987: 25 f8 07 00 00 and $0x7f8,%eax ffffffff8100398c: 48 29 c4 sub %rax,%rsp ffffffff8100398f: 48 8d 44 24 0f lea 0xf(%rsp),%rax ffffffff81003994: 48 83 e0 f0 and $0xfffffffffffffff0,%rax ... As a result of the above stack alignment, this patch introduces about 5 bits of randomness after pt_regs is spilled to the thread stack on x86_64, and 6 bits on x86_32 (since its has 1 fewer bit required for stack alignment). The amount of entropy could be adjusted based on how much of the stack space we wish to trade for security. My measure of syscall performance overhead (on x86_64): lmbench: /usr/lib/lmbench/bin/x86_64-linux-gnu/lat_syscall -N 10000 null randomize_kstack_offset=y Simple syscall: 0.7082 microseconds randomize_kstack_offset=n Simple syscall: 0.7016 microseconds So, roughly 0.9% overhead growth for a no-op syscall, which is very manageable. And for people that don't want this, it's off by default. There are two gotchas with using the alloca() trick. First, compilers that have Stack Clash protection (-fstack-clash-protection) enabled by default (e.g. Ubuntu[3]) add pagesize stack probes to any dynamic stack allocations. While the randomization offset is always less than a page, the resulting assembly would still contain (unreachable!) probing routines, bloating the resulting assembly. To avoid this, -fno-stack-clash-protection is unconditionally added to the kernel Makefile since this is the only dynamic stack allocation in the kernel (now that VLAs have been removed) and it is provably safe from Stack Clash style attacks. The second gotcha with alloca() is a negative interaction with -fstack-protector*, in that it sees the alloca() as an array allocation, which triggers the unconditional addition of the stack canary function pre/post-amble which slows down syscalls regardless of the static branch. In order to avoid adding this unneeded check and its associated performance impact, architectures need to carefully remove uses of -fstack-protector-strong (or -fstack-protector) in the compilation units that use the add_random_kstack() macro and to audit the resulting stack mitigation coverage (to make sure no desired coverage disappears). No change is visible for this on x86 because the stack protector is already unconditionally disabled for the compilation unit, but the change is required on arm64. There is, unfortunately, no attribute that can be used to disable stack protector for specific functions. Comparison to PaX RANDKSTACK feature: The RANDKSTACK feature randomizes the location of the stack start (cpu_current_top_of_stack), i.e. including the location of pt_regs structure itself on the stack. Initially this patch followed the same approach, but during the recent discussions[2], it has been determined to be of a little value since, if ptrace functionality is available for an attacker, they can use PTRACE_PEEKUSR/PTRACE_POKEUSR to read/write different offsets in the pt_regs struct, observe the cache behavior of the pt_regs accesses, and figure out the random stack offset. Another difference is that the random offset is stored in a per-cpu variable, rather than having it be per-thread. As a result, these implementations differ a fair bit in their implementation details and results, though obviously the intent is similar. [1] https://lore.kernel.org/kernel-hardening/2236FBA76BA1254E88B949DDB74E612BA4BC57C1@IRSMSX102.ger.corp.intel.com/ [2] https://lore.kernel.org/kernel-hardening/20190329081358.30497-1-elena.reshetova@intel.com/ [3] https://lists.ubuntu.com/archives/ubuntu-devel/2019-June/040741.html Co-developed-by: Elena Reshetova <elena.reshetova@intel.com> Signed-off-by: Elena Reshetova <elena.reshetova@intel.com> Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lore.kernel.org/r/20210401232347.2791257-4-keescook@chromium.org |
||
Cao jin
|
2b7d2fe76f |
bootconfig: Update prototype of setup_boot_config()
Parameter "cmdline" has no use, drop it. Link: https://lkml.kernel.org/r/20210311085213.27680-1-jojing64@gmail.com Acked-by: Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by: Cao jin <jojing64@gmail.com> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org> |
||
Sumit Garg
|
d54ce6158e |
kgdb: fix to kill breakpoints on initmem after boot
Currently breakpoints in kernel .init.text section are not handled correctly while allowing to remove them even after corresponding pages have been freed. Fix it via killing .init.text section breakpoints just prior to initmem pages being freed. Doug: "HW breakpoints aren't handled by this patch but it's probably not such a big deal". Link: https://lkml.kernel.org/r/20210224081652.587785-1-sumit.garg@linaro.org Signed-off-by: Sumit Garg <sumit.garg@linaro.org> Suggested-by: Doug Anderson <dianders@chromium.org> Acked-by: Doug Anderson <dianders@chromium.org> Acked-by: Daniel Thompson <daniel.thompson@linaro.org> Tested-by: Daniel Thompson <daniel.thompson@linaro.org> Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Steven Rostedt (VMware) <rostedt@goodmis.org> Cc: Jason Wessel <jason.wessel@windriver.com> Cc: Peter Zijlstra <peterz@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
Vijayanand Jitta
|
e1fdc40334 |
lib: stackdepot: add support to disable stack depot
Add a kernel parameter stack_depot_disable to disable stack depot. So that stack hash table doesn't consume any memory when stack depot is disabled. The use case is CONFIG_PAGE_OWNER without page_owner=on. Without this patch, stackdepot will consume the memory for the hashtable. By default, it's 8M which is never trivial. With this option, in CONFIG_PAGE_OWNER configured system, page_owner=off, stack_depot_disable in kernel command line, we could save the wasted memory for the hashtable. [akpm@linux-foundation.org: fix CONFIG_STACKDEPOT=n build] Link: https://lkml.kernel.org/r/1611749198-24316-2-git-send-email-vjitta@codeaurora.org Signed-off-by: Vinayak Menon <vinmenon@codeaurora.org> Signed-off-by: Vijayanand Jitta <vjitta@codeaurora.org> Cc: Alexander Potapenko <glider@google.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Yogesh Lal <ylal@codeaurora.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
Alexander Potapenko
|
0ce20dd840 |
mm: add Kernel Electric-Fence infrastructure
Patch series "KFENCE: A low-overhead sampling-based memory safety error detector", v7. This adds the Kernel Electric-Fence (KFENCE) infrastructure. KFENCE is a low-overhead sampling-based memory safety error detector of heap use-after-free, invalid-free, and out-of-bounds access errors. This series enables KFENCE for the x86 and arm64 architectures, and adds KFENCE hooks to the SLAB and SLUB allocators. KFENCE is designed to be enabled in production kernels, and has near zero performance overhead. Compared to KASAN, KFENCE trades performance for precision. The main motivation behind KFENCE's design, is that with enough total uptime KFENCE will detect bugs in code paths not typically exercised by non-production test workloads. One way to quickly achieve a large enough total uptime is when the tool is deployed across a large fleet of machines. KFENCE objects each reside on a dedicated page, at either the left or right page boundaries. The pages to the left and right of the object page are "guard pages", whose attributes are changed to a protected state, and cause page faults on any attempted access to them. Such page faults are then intercepted by KFENCE, which handles the fault gracefully by reporting a memory access error. Guarded allocations are set up based on a sample interval (can be set via kfence.sample_interval). After expiration of the sample interval, the next allocation through the main allocator (SLAB or SLUB) returns a guarded allocation from the KFENCE object pool. At this point, the timer is reset, and the next allocation is set up after the expiration of the interval. To enable/disable a KFENCE allocation through the main allocator's fast-path without overhead, KFENCE relies on static branches via the static keys infrastructure. The static branch is toggled to redirect the allocation to KFENCE. The KFENCE memory pool is of fixed size, and if the pool is exhausted no further KFENCE allocations occur. The default config is conservative with only 255 objects, resulting in a pool size of 2 MiB (with 4 KiB pages). We have verified by running synthetic benchmarks (sysbench I/O, hackbench) and production server-workload benchmarks that a kernel with KFENCE (using sample intervals 100-500ms) is performance-neutral compared to a non-KFENCE baseline kernel. KFENCE is inspired by GWP-ASan [1], a userspace tool with similar properties. The name "KFENCE" is a homage to the Electric Fence Malloc Debugger [2]. For more details, see Documentation/dev-tools/kfence.rst added in the series -- also viewable here: https://raw.githubusercontent.com/google/kasan/kfence/Documentation/dev-tools/kfence.rst [1] http://llvm.org/docs/GwpAsan.html [2] https://linux.die.net/man/3/efence This patch (of 9): This adds the Kernel Electric-Fence (KFENCE) infrastructure. KFENCE is a low-overhead sampling-based memory safety error detector of heap use-after-free, invalid-free, and out-of-bounds access errors. KFENCE is designed to be enabled in production kernels, and has near zero performance overhead. Compared to KASAN, KFENCE trades performance for precision. The main motivation behind KFENCE's design, is that with enough total uptime KFENCE will detect bugs in code paths not typically exercised by non-production test workloads. One way to quickly achieve a large enough total uptime is when the tool is deployed across a large fleet of machines. KFENCE objects each reside on a dedicated page, at either the left or right page boundaries. The pages to the left and right of the object page are "guard pages", whose attributes are changed to a protected state, and cause page faults on any attempted access to them. Such page faults are then intercepted by KFENCE, which handles the fault gracefully by reporting a memory access error. To detect out-of-bounds writes to memory within the object's page itself, KFENCE also uses pattern-based redzones. The following figure illustrates the page layout: ---+-----------+-----------+-----------+-----------+-----------+--- | xxxxxxxxx | O : | xxxxxxxxx | : O | xxxxxxxxx | | xxxxxxxxx | B : | xxxxxxxxx | : B | xxxxxxxxx | | x GUARD x | J : RED- | x GUARD x | RED- : J | x GUARD x | | xxxxxxxxx | E : ZONE | xxxxxxxxx | ZONE : E | xxxxxxxxx | | xxxxxxxxx | C : | xxxxxxxxx | : C | xxxxxxxxx | | xxxxxxxxx | T : | xxxxxxxxx | : T | xxxxxxxxx | ---+-----------+-----------+-----------+-----------+-----------+--- Guarded allocations are set up based on a sample interval (can be set via kfence.sample_interval). After expiration of the sample interval, a guarded allocation from the KFENCE object pool is returned to the main allocator (SLAB or SLUB). At this point, the timer is reset, and the next allocation is set up after the expiration of the interval. To enable/disable a KFENCE allocation through the main allocator's fast-path without overhead, KFENCE relies on static branches via the static keys infrastructure. The static branch is toggled to redirect the allocation to KFENCE. To date, we have verified by running synthetic benchmarks (sysbench I/O, hackbench) that a kernel compiled with KFENCE is performance-neutral compared to the non-KFENCE baseline. For more details, see Documentation/dev-tools/kfence.rst (added later in the series). [elver@google.com: fix parameter description for kfence_object_start()] Link: https://lkml.kernel.org/r/20201106092149.GA2851373@elver.google.com [elver@google.com: avoid stalling work queue task without allocations] Link: https://lkml.kernel.org/r/CADYN=9J0DQhizAGB0-jz4HOBBh+05kMBXb4c0cXMS7Qi5NAJiw@mail.gmail.com Link: https://lkml.kernel.org/r/20201110135320.3309507-1-elver@google.com [elver@google.com: fix potential deadlock due to wake_up()] Link: https://lkml.kernel.org/r/000000000000c0645805b7f982e4@google.com Link: https://lkml.kernel.org/r/20210104130749.1768991-1-elver@google.com [elver@google.com: add option to use KFENCE without static keys] Link: https://lkml.kernel.org/r/20210111091544.3287013-1-elver@google.com [elver@google.com: add missing copyright and description headers] Link: https://lkml.kernel.org/r/20210118092159.145934-1-elver@google.com Link: https://lkml.kernel.org/r/20201103175841.3495947-2-elver@google.com Signed-off-by: Marco Elver <elver@google.com> Signed-off-by: Alexander Potapenko <glider@google.com> Reviewed-by: Dmitry Vyukov <dvyukov@google.com> Reviewed-by: SeongJae Park <sjpark@amazon.de> Co-developed-by: Marco Elver <elver@google.com> Reviewed-by: Jann Horn <jannh@google.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Paul E. McKenney <paulmck@kernel.org> Cc: Andrey Konovalov <andreyknvl@google.com> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Christopher Lameter <cl@linux.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: David Rientjes <rientjes@google.com> Cc: Eric Dumazet <edumazet@google.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Hillf Danton <hdanton@sina.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Joern Engel <joern@purestorage.com> Cc: Kees Cook <keescook@chromium.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Will Deacon <will@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |