4835 Commits

Author SHA1 Message Date
Eric Biggers
8216776ccf ext4: reject casefold inode flag without casefold feature
It is invalid for the casefold inode flag to be set without the casefold
superblock feature flag also being set.  e2fsck already considers this
case to be invalid and handles it by offering to clear the casefold flag
on the inode.  __ext4_iget() also already considered this to be invalid,
sort of, but it only got so far as logging an error message; it didn't
actually reject the inode.  Make it reject the inode so that other code
doesn't have to handle this case.  This matches what f2fs does.

Note: we could check 's_encoding != NULL' instead of
ext4_has_feature_casefold().  This would make the check robust against
the casefold feature being enabled by userspace writing to the page
cache of the mounted block device.  However, it's unsolvable in general
for filesystems to be robust against concurrent writes to the page cache
of the mounted block device.  Though this very particular scenario
involving the casefold feature is solvable, we should not pretend that
we can support this model, so let's just check the casefold feature.
tune2fs already forbids enabling casefold on a mounted filesystem.

Signed-off-by: Eric Biggers <ebiggers@google.com>
Link: https://lore.kernel.org/r/20230814182903.37267-2-ebiggers@kernel.org
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2023-08-27 11:27:13 -04:00
Ruan Jinjie
0f6bc57971 ext4: use LIST_HEAD() to initialize the list_head in mballoc.c
Use LIST_HEAD() to initialize the list_head instead of open-coding it.

Signed-off-by: Ruan Jinjie <ruanjinjie@huawei.com>
Link: https://lore.kernel.org/r/20230812071839.3481909-1-ruanjinjie@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2023-08-27 11:27:13 -04:00
Liu Song
03de20bed2 ext4: do not mark inode dirty every time when appending using delalloc
In the delalloc append write scenario, if inode's i_size is extended due
to buffer write, there are delalloc writes pending in the range up to
i_size, and no need to touch i_disksize since writeback will push
i_disksize up to i_size eventually. Offers significant performance
improvement in high-frequency append write scenarios.

I conducted tests in my 32-core environment by launching 32 concurrent
threads to append write to the same file. Each write operation had a
length of 1024 bytes and was repeated 100000 times. Without using this
patch, the test was completed in 7705 ms. However, with this patch, the
test was completed in 5066 ms, resulting in a performance improvement of
34%.

Moreover, in test scenarios of Kafka version 2.6.2, using packet size of
2K, with this patch resulted in a 10% performance improvement.

Signed-off-by: Liu Song <liusong@linux.alibaba.com>
Suggested-by: Jan Kara <jack@suse.cz>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20230810154333.84921-1-liusong@linux.alibaba.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2023-08-27 11:27:13 -04:00
Theodore Ts'o
bb15cea20f ext4: rename s_error_work to s_sb_upd_work
The most common use that s_error_work will get scheduled is now the
periodic update of the superblock.  So rename it to s_sb_upd_work.

Also rename the function flush_stashed_error_work() to
update_super_work().

Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2023-08-27 11:27:12 -04:00
Vitaliy Kuznetsov
ff0722de89 ext4: add periodic superblock update check
This patch introduces a mechanism to periodically check and update
the superblock within the ext4 file system. The main purpose of this
patch is to keep the disk superblock up to date. The update will be
performed if more than one hour has passed since the last update, and
if more than 16MB of data have been written to disk.

This check and update is performed within the ext4_journal_commit_callback
function, ensuring that the superblock is written while the disk is
active, rather than based on a timer that may trigger during disk idle
periods.

Discussion https://www.spinics.net/lists/linux-ext4/msg85865.html

Signed-off-by: Vitaliy Kuznetsov <vk.en.mail@gmail.com>
Link: https://lore.kernel.org/r/20230810143852.40228-1-vk.en.mail@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2023-08-27 11:27:12 -04:00
Brian Foster
194505b55d ext4: drop dio overwrite only flag and associated warning
The commit referenced below opened up concurrent unaligned dio under
shared locking for pure overwrites. In doing so, it enabled use of
the IOMAP_DIO_OVERWRITE_ONLY flag and added a warning on unexpected
-EAGAIN returns as an extra precaution, since ext4 does not retry
writes in such cases. The flag itself is advisory in this case since
ext4 checks for unaligned I/Os and uses appropriate locking up
front, rather than on a retry in response to -EAGAIN.

As it turns out, the warning check is susceptible to false positives
because there are scenarios where -EAGAIN can be expected from lower
layers without necessarily having IOCB_NOWAIT set on the iocb. For
example, one instance of the warning has been seen where io_uring
sets IOCB_HIPRI, which in turn results in REQ_POLLED|REQ_NOWAIT on
the bio. This results in -EAGAIN if the block layer is unable to
allocate a request, etc. [Note that there is an outstanding patch to
untangle REQ_POLLED and REQ_NOWAIT such that the latter relies on
IOCB_NOWAIT, which would also address this instance of the warning.]

Another instance of the warning has been reproduced by syzbot. A dio
write is interrupted down in __get_user_pages_locked() waiting on
the mm lock and returns -EAGAIN up the stack. If the iomap dio
iteration layer has made no progress on the write to this point,
-EAGAIN returns up to the filesystem and triggers the warning.

This use of the overwrite flag in ext4 is precautionary and
half-baked. I.e., ext4 doesn't actually implement overwrite checking
in the iomap callbacks when the flag is set, so the only extra
verification it provides are i_size checks in the generic iomap dio
layer. Combined with the tendency for false positives, the added
verification is not worth the extra trouble. Remove the flag,
associated warning, and update the comments to document when
concurrent unaligned dio writes are allowed and why said flag is not
used.

Cc: stable@kernel.org
Reported-by: syzbot+5050ad0fb47527b1808a@syzkaller.appspotmail.com
Reported-by: Pengfei Xu <pengfei.xu@intel.com>
Fixes: 310ee0902b8d ("ext4: allow concurrent unaligned dio overwrites")
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20230810165559.946222-1-bfoster@redhat.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2023-08-27 11:27:12 -04:00
Wang Jianjian
68228da51c ext4: add correct group descriptors and reserved GDT blocks to system zone
When setup_system_zone, flex_bg is not initialized so it is always 1.
Use a new helper function, ext4_num_base_meta_blocks() which does not
depend on sbi->s_log_groups_per_flex being initialized.

[ Squashed two patches in the Link URL's below together into a single
  commit, which is simpler to review/understand.  Also fix checkpatch
  warnings. --TYT ]

Cc: stable@kernel.org
Signed-off-by: Wang Jianjian <wangjianjian0@foxmail.com>
Link: https://lore.kernel.org/r/tencent_21AF0D446A9916ED5C51492CC6C9A0A77B05@qq.com
Link: https://lore.kernel.org/r/tencent_D744D1450CC169AEA77FCF0A64719909ED05@qq.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2023-08-27 11:27:12 -04:00
Cai Xinchen
b6c7d6dc8a ext4: remove unused function declaration
These functions do not have its function implementation.
So those function declaration is useless. Remove these

Signed-off-by: Cai Xinchen <caixinchen1@huawei.com>
Link: https://lore.kernel.org/r/20230802030025.173148-1-caixinchen1@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2023-08-27 11:27:12 -04:00
Su Hui
a50bda1474 ext4: mballoc: avoid garbage value from err
clang's static analysis warning: fs/ext4/mballoc.c
line 4178, column 6, Branch condition evaluates to a garbage value.

err is uninitialized and will be judged when 'len <= 0' or
it first enters the loop while the condition "!ext4_sb_block_valid()"
is true. Although this can't make problems now, it's better to
correct it.

Signed-off-by: Su Hui <suhui@nfschina.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Link: https://lore.kernel.org/r/20230725043310.1227621-1-suhui@nfschina.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2023-08-27 11:27:12 -04:00
Lu Hongfei
79ebf48c44 ext4: use sbi instead of EXT4_SB(sb) in ext4_mb_new_blocks_simple()
Signed-off-by: Lu Hongfei <luhongfei@vivo.com>
Link: https://lore.kernel.org/r/20230707115907.26637-1-luhongfei@vivo.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2023-08-27 11:27:12 -04:00
Lu Hongfei
89cadf6e22 ext4: change the type of blocksize in ext4_mb_init_cache()
The return value type of i_blocksize() is 'unsigned int', so the
type of blocksize has been modified from 'int' to 'unsigned int'
to ensure data type consistency.

Signed-off-by: Lu Hongfei <luhongfei@vivo.com>
Link: https://lore.kernel.org/r/20230707105516.9156-1-luhongfei@vivo.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2023-08-27 11:27:12 -04:00
Zhihao Cheng
1524773425 ext4: fix unttached inode after power cut with orphan file feature enabled
Running generic/475(filesystem consistent tests after power cut) could
easily trigger unattached inode error while doing fsck:
  Unattached zero-length inode 39405.  Clear? no

  Unattached inode 39405
  Connect to /lost+found? no

Above inconsistence is caused by following process:
       P1                       P2
ext4_create
 inode = ext4_new_inode_start_handle  // itable records nlink=1
 ext4_add_nondir
   err = ext4_add_entry  // ENOSPC
    ext4_append
     ext4_bread
      ext4_getblk
       ext4_map_blocks // returns ENOSPC
   drop_nlink(inode) // won't be updated into disk inode
   ext4_orphan_add(handle, inode)
    ext4_orphan_file_add
 ext4_journal_stop(handle)
		      jbd2_journal_commit_transaction // commit success
              >> power cut <<
ext4_fill_super
 ext4_load_and_init_journal   // itable records nlink=1
 ext4_orphan_cleanup
  ext4_process_orphan
   if (inode->i_nlink)        // true, inode won't be deleted

Then, allocated inode will be reserved on disk and corresponds to no
dentries, so e2fsck reports 'unattached inode' problem.

The problem won't happen if orphan file feature is disabled, because
ext4_orphan_add() will update disk inode in orphan list mode. There
are several places not updating disk inode while putting inode into
orphan area, such as ext4_add_nondir(), ext4_symlink() and whiteout
in ext4_rename(). Fix it by updating inode into disk in all error
branches of these places.

Link: https://bugzilla.kernel.org/show_bug.cgi?id=217605
Fixes: 02f310fcf47f ("ext4: Speedup ext4 orphan inode handling")
Signed-off-by: Zhihao Cheng <chengzhihao1@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20230628132011.650383-1-chengzhihao1@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2023-08-27 11:27:12 -04:00
Zhang Yi
ee5c807137 ext4: ext4_get_{dev}_journal return proper error value
ext4_get_journal() and ext4_get_dev_journal() return NULL if they failed
to init journal, making them return proper error value instead, also
rename them to ext4_open_{inode,dev}_journal().

[ Folded fix to ext4_calculate_overhead() to check for an ERR_PTR
  instead of NULL. ]

Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20230811063610.2980059-13-yi.zhang@huaweicloud.com
Reported-by: syzbot+b3123e6d9842e526de39@syzkaller.appspotmail.com
Link: https://lore.kernel.org/r/20230826011029.2023140-1-yi.zhang@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2023-08-27 11:13:39 -04:00
Zhang Yi
bc74e6a38d ext4: cleanup ext4_get_dev_journal() and ext4_get_journal()
Factor out a new helper form ext4_get_dev_journal() to get external
journal bdev and check validation of this device, drop ext4_blkdev_get()
helper, and also remove duplicate check of journal feature. It makes
ext4_get_dev_journal() more clear than before.

Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20230811063610.2980059-12-yi.zhang@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2023-08-23 00:04:20 -04:00
Zhang Yi
8e6cf5fbb7 jbd2: jbd2_journal_init_{dev,inode} return proper error return value
Current jbd2_journal_init_{dev,inode} return NULL if some error
happens, make them to pass out proper error return value.

[ Fix from Yang Yingliang folded in. ]

Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20230811063610.2980059-11-yi.zhang@huaweicloud.com
Link: https://lore.kernel.org/r/20230822030018.644419-1-yangyingliang@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2023-08-23 00:01:52 -04:00
Ritesh Harjani
772c9f691d ext4: don't use CR_BEST_AVAIL_LEN for non-regular files
Using CR_BEST_AVAIL_LEN only make sense for regular files, as for
non-regular files we never normalize the allocation request length i.e.
goal len is same as original length (ac_g_ex.fe_len == ac_o_ex.fe_len).

Hence there is no scope of trimming the goal length to make it
satisfy original request len. Thus this patch avoids using
CR_BEST_AVAIL_LEN criteria for non-regular files request.

Cc: stable@kernel.org
Fixes: 33122aa930f1 ("ext4: Add allocation criteria 1.5 (CR1_5)")
Reported-by: Eric Whitney <enwlinux@gmail.com>
Signed-off-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Tested-by: Eric Whitney <enwlinux@gmail.com>
Link: https://lore.kernel.org/r/2a694c748ff8b8c4b416995a24f06f07b55047a8.1689516047.git.ritesh.list@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2023-08-05 08:18:04 -04:00
Luís Henriques
7ca4b085f4 ext4: fix memory leaks in ext4_fname_{setup_filename,prepare_lookup}
If the filename casefolding fails, we'll be leaking memory from the
fscrypt_name struct, namely from the 'crypto_buf.name' member.

Make sure we free it in the error path on both ext4_fname_setup_filename()
and ext4_fname_prepare_lookup() functions.

Cc: stable@kernel.org
Fixes: 1ae98e295fa2 ("ext4: optimize match for casefolded encrypted dirs")
Signed-off-by: Luís Henriques <lhenriques@suse.de>
Reviewed-by: Eric Biggers <ebiggers@google.com>
Link: https://lore.kernel.org/r/20230803091713.13239-1-lhenriques@suse.de
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2023-08-05 08:17:56 -04:00
Kemeng Shi
4eea9fbed9 ext4: correct some stale comment of criteria
We named criteria with CR_XXX, correct stale comment to criteria with
raw number.

Signed-off-by: Kemeng Shi <shikemeng@huaweicloud.com>
Reviewed-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Link: https://lore.kernel.org/r/20230801143204.2284343-11-shikemeng@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2023-08-03 10:47:30 -04:00
Kemeng Shi
bcb123ac9b ext4: return found group directly in ext4_mb_choose_next_group_best_avail
Return good group when it's found in loop to remove futher check if good
group is found after loop.

Signed-off-by: Kemeng Shi <shikemeng@huaweicloud.com>
Reviewed-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Link: https://lore.kernel.org/r/20230801143204.2284343-10-shikemeng@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2023-08-03 10:47:30 -04:00
Kemeng Shi
b50675a4a6 ext4: return found group directly in ext4_mb_choose_next_group_goal_fast
Return good group when it's found in loop to remove futher check if good
group is found after loop.

Signed-off-by: Kemeng Shi <shikemeng@huaweicloud.com>
Reviewed-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Link: https://lore.kernel.org/r/20230801143204.2284343-9-shikemeng@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2023-08-03 10:47:30 -04:00
Kemeng Shi
f6c72fef12 ext4: remove unused ext4_{set}/{clear}_bit_atomic
Remove ext4_set_bit_atomic and ext4_clear_bit_atomic which are defined but not
used.

Signed-off-by: Kemeng Shi <shikemeng@huaweicloud.com>
Reviewed-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Link: https://lore.kernel.org/r/20230801143204.2284343-8-shikemeng@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2023-08-03 10:47:30 -04:00
Kemeng Shi
de8bf0e5ee ext4: replace the traditional ternary conditional operator with with max()/min()
Replace the traditional ternary conditional operator with with max()/min()

Signed-off-by: Kemeng Shi <shikemeng@huaweicloud.com>
Reviewed-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Link: https://lore.kernel.org/r/20230801143204.2284343-7-shikemeng@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2023-08-03 10:47:30 -04:00
Kemeng Shi
ad635507b5 ext4: remove unnecessary return for void function
The return at end of void function is unnecessary, just remove it.

Signed-off-by: Kemeng Shi <shikemeng@huaweicloud.com>
Reviewed-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Link: https://lore.kernel.org/r/20230801143204.2284343-6-shikemeng@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2023-08-03 10:47:30 -04:00
Kemeng Shi
bb60caa2db ext4: use is_power_of_2 helper in ext4_mb_regular_allocator
Use intuitive is_power_of_2 helper in ext4_mb_regular_allocator.

Signed-off-by: Kemeng Shi <shikemeng@huaweicloud.com>
Reviewed-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Link: https://lore.kernel.org/r/20230801143204.2284343-5-shikemeng@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2023-08-03 10:47:30 -04:00
Kemeng Shi
919eb90cec ext4: return found group directly in ext4_mb_choose_next_group_p2_aligned
Return good group when it's found in loop to remove unnecessary NULL
initialization of grp and futher check if good group is found after loop.

Signed-off-by: Kemeng Shi <shikemeng@huaweicloud.com>
Reviewed-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Link: https://lore.kernel.org/r/20230801143204.2284343-4-shikemeng@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2023-08-03 10:47:30 -04:00
Kemeng Shi
60c672b7f2 ext4: avoid potential data overflow in next_linear_group
ngroups is ext4_group_t (unsigned int) while next_linear_group treat it
in int. If ngroups is bigger than max number described by int, it will
be treat as a negative number. Then "return group + 1 >= ngroups ? 0 :
group + 1;" may keep returning 0.
Switch int to ext4_group_t in next_linear_group to fix the overflow.

Fixes: 196e402adf2e ("ext4: improve cr 0 / cr 1 group scanning")
Signed-off-by: Kemeng Shi <shikemeng@huaweicloud.com>
Reviewed-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Link: https://lore.kernel.org/r/20230801143204.2284343-3-shikemeng@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2023-08-03 10:47:29 -04:00
Kemeng Shi
a9ce5993a0 ext4: correct grp validation in ext4_mb_good_group
Group corruption check will access memory of grp and will trigger kernel
crash if grp is NULL. So do NULL check before corruption check.

Fixes: 5354b2af3406 ("ext4: allow ext4_get_group_info() to fail")
Signed-off-by: Kemeng Shi <shikemeng@huaweicloud.com>
Reviewed-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Link: https://lore.kernel.org/r/20230801143204.2284343-2-shikemeng@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2023-08-03 10:47:29 -04:00
Ojaswin Mujoo
304749c0d5 ext4: replace CR_FAST macro with inline function for readability
Replace CR_FAST with ext4_mb_cr_expensive() inline function for better
readability. This function returns true if the criteria is one of the
expensive/slower ones where lots of disk IO/prefetching is acceptable.

No functional changes are intended in this patch.

Signed-off-by: Ojaswin Mujoo <ojaswin@linux.ibm.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Link: https://lore.kernel.org/r/20230630085927.140137-1-ojaswin@linux.ibm.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2023-08-03 10:39:05 -04:00
Jan Kara
1e1566b9c8 ext4: replace read-only check for shutdown check in mmp code
The multi-mount protection kthread checks for read-only filesystem and
aborts in that case. The remount code actually handles stopping of the
kthread on remount so the only purpose of the check is in case of
emergency remount read-only. Replace the check for read-only filesystem
with a check for shutdown filesystem as running MMP on such is risky
anyway and it makes ordering of things during remount simpler.

Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20230616165109.21695-11-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2023-07-29 18:37:53 -04:00
Jan Kara
889860e452 ext4: drop read-only check from ext4_force_commit()
JBD2 code will quickly return without doing anything when there's
nothing to commit so there's no point in the read-only check in
ext4_force_commit(). Just drop it.

Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20230616165109.21695-10-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2023-07-29 18:37:53 -04:00
Jan Kara
f1128084b4 ext4: drop read-only check in ext4_write_inode()
We should not have dirty inodes on read-only filesystem. Also silently
bailing without writing anything would be a problem when we enable
quotas during remount while the filesystem is read-only. So drop the
read-only check.

Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20230616165109.21695-9-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2023-07-29 18:37:53 -04:00
Jan Kara
ffb6844e28 ext4: drop read-only check in ext4_init_inode_table()
We better should not be initializing inode tables on read-only
filesystem. The following transaction start will warn us and make the
function bail anyway so drop the pointless check.

Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20230616165109.21695-8-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2023-07-29 18:37:53 -04:00
Jan Kara
e7fc2b31e0 ext4: warn on read-only filesystem in ext4_journal_check_start()
Now that filesystem abort marks the filesystem as shutdown, we shouldn't
be ever hitting the sb_rdonly() check in ext4_journal_check_start().
Since this is a suitable place for catching all sorts of programming
errors, convert the check to WARN_ON instead of dropping it.

Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20230616165109.21695-7-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2023-07-29 18:37:53 -04:00
Jan Kara
e0e985f3f8 ext4: avoid starting transaction on read-only fs in ext4_quota_off()
When the filesystem gets first remounted read-only and then unmounted,
ext4_quota_off() will try to start a transaction (and fail) on read-only
filesystem to cleanup inode flags for legacy quota files. Just bail
before trying to start a transaction instead since that is going to
issue a warning.

Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20230616165109.21695-6-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2023-07-29 18:37:53 -04:00
Jan Kara
95257987a6 ext4: drop EXT4_MF_FS_ABORTED flag
EXT4_MF_FS_ABORTED flag has practically the same intent as
EXT4_FLAGS_SHUTDOWN flag. The shutdown flag is checked in many more
places than the aborted flag which is mostly the historical artifact
where we were relying on SB_RDONLY checks instead of the aborted flag
checks. There are only three places - ext4_sync_file(),
__ext4_remount(), and mballoc debug code - which check aborted flag and
not shutdown flag and this is arguably a bug. Avoid these
inconsistencies by removing EXT4_MF_FS_ABORTED flag and using
EXT4_FLAGS_SHUTDOWN everywhere.

Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20230616165109.21695-5-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2023-07-29 18:37:53 -04:00
Jan Kara
22b8d707b0 ext4: make 'abort' mount option handling standard
'abort' mount option is the only mount option that has special handling
and sets a bit in sbi->s_mount_flags. There is not strong reason for
that so just simplify the code and make 'abort' set a bit in
sbi->s_mount_opt2 as any other mount option. This simplifies the code
and will allow us to drop EXT4_MF_FS_ABORTED completely in the following
patch.

Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20230616165109.21695-4-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2023-07-29 18:37:53 -04:00
Jan Kara
eb8ab4443a ext4: make ext4_forced_shutdown() take struct super_block
Currently ext4_forced_shutdown() takes struct ext4_sb_info but most
callers need to get it from struct super_block anyway. So just pass in
struct super_block to save all callers from some boilerplate code. No
functional changes.

Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20230616165109.21695-3-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2023-07-29 18:37:24 -04:00
Jan Kara
d5d020b329 ext4: use sb_rdonly() helper for checking read-only flag
sb_rdonly() helper instead of directly checking sb->s_flags.

Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20230616165109.21695-2-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2023-07-29 18:11:13 -04:00
Jan Kara
98175720c9 ext4: remove pointless sb_rdonly() checks from freezing code
ext4_freeze() and ext4_unfreeze() checks for sb_rdonly(). However this
check is pointless as VFS already checks for read-only filesystem before
calling filesystem specific methods. Remove the pointless checks.

Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20230616165109.21695-1-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2023-07-29 18:11:13 -04:00
Baokun Li
bedc5d3463 ext4: avoid overlapping preallocations due to overflow
Let's say we want to allocate 2 blocks starting from 4294966386, after
predicting the file size, start is aligned to 4294965248, len is changed
to 2048, then end = start + size = 0x100000000. Since end is of
type ext4_lblk_t, i.e. uint, end is truncated to 0.

This causes (pa->pa_lstart >= end) to always hold when checking if the
current extent to be allocated crosses already preallocated blocks, so the
resulting ac_g_ex may cross already preallocated blocks. Hence we convert
the end type to loff_t and use pa_logical_end() to avoid overflow.

Signed-off-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Link: https://lore.kernel.org/r/20230724121059.11834-4-libaokun1@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2023-07-29 00:02:30 -04:00
Baokun Li
bc056e7163 ext4: fix BUG in ext4_mb_new_inode_pa() due to overflow
When we calculate the end position of ext4_free_extent, this position may
be exactly where ext4_lblk_t (i.e. uint) overflows. For example, if
ac_g_ex.fe_logical is 4294965248 and ac_orig_goal_len is 2048, then the
computed end is 0x100000000, which is 0. If ac->ac_o_ex.fe_logical is not
the first case of adjusting the best extent, that is, new_bex_end > 0, the
following BUG_ON will be triggered:

=========================================================
kernel BUG at fs/ext4/mballoc.c:5116!
invalid opcode: 0000 [#1] PREEMPT SMP PTI
CPU: 3 PID: 673 Comm: xfs_io Tainted: G E 6.5.0-rc1+ #279
RIP: 0010:ext4_mb_new_inode_pa+0xc5/0x430
Call Trace:
 <TASK>
 ext4_mb_use_best_found+0x203/0x2f0
 ext4_mb_try_best_found+0x163/0x240
 ext4_mb_regular_allocator+0x158/0x1550
 ext4_mb_new_blocks+0x86a/0xe10
 ext4_ext_map_blocks+0xb0c/0x13a0
 ext4_map_blocks+0x2cd/0x8f0
 ext4_iomap_begin+0x27b/0x400
 iomap_iter+0x222/0x3d0
 __iomap_dio_rw+0x243/0xcb0
 iomap_dio_rw+0x16/0x80
=========================================================

A simple reproducer demonstrating the problem:

	mkfs.ext4 -F /dev/sda -b 4096 100M
	mount /dev/sda /tmp/test
	fallocate -l1M /tmp/test/tmp
	fallocate -l10M /tmp/test/file
	fallocate -i -o 1M -l16777203M /tmp/test/file
	fsstress -d /tmp/test -l 0 -n 100000 -p 8 &
	sleep 10 && killall -9 fsstress
	rm -f /tmp/test/tmp
	xfs_io -c "open -ad /tmp/test/file" -c "pwrite -S 0xff 0 8192"

We simply refactor the logic for adjusting the best extent by adding
a temporary ext4_free_extent ex and use extent_logical_end() to avoid
overflow, which also simplifies the code.

Cc: stable@kernel.org # 6.4
Fixes: 93cdf49f6eca ("ext4: Fix best extent lstart adjustment logic in ext4_mb_new_inode_pa()")
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Link: https://lore.kernel.org/r/20230724121059.11834-3-libaokun1@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2023-07-29 00:02:30 -04:00
Baokun Li
43bbddc067 ext4: add two helper functions extent_logical_end() and pa_logical_end()
When we use lstart + len to calculate the end of free extent or prealloc
space, it may exceed the maximum value of 4294967295(0xffffffff) supported
by ext4_lblk_t and cause overflow, which may lead to various problems.

Therefore, we add two helper functions, extent_logical_end() and
pa_logical_end(), to limit the type of end to loff_t, and also convert
lstart to loff_t for calculation to avoid overflow.

Signed-off-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Link: https://lore.kernel.org/r/20230724121059.11834-2-libaokun1@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2023-07-29 00:02:30 -04:00
Ojaswin Mujoo
9d3de7ee19 ext4: fix rbtree traversal bug in ext4_mb_use_preallocated
During allocations, while looking for preallocations(PA) in the per
inode rbtree, we can't do a direct traversal of the tree because
ext4_mb_discard_group_preallocation() can paralelly mark the pa deleted
and that can cause direct traversal to skip some entries. This was
leading to a BUG_ON() being hit [1] when we missed a PA that could satisfy
our request and ultimately tried to create a new PA that would overlap
with the missed one.

To makes sure we handle that case while still keeping the performance of
the rbtree, we make use of the fact that the only pa that could possibly
overlap the original goal start is the one that satisfies the below
conditions:

  1. It must have it's logical start immediately to the left of
  (ie less than) original logical start.

  2. It must not be deleted

To find this pa we use the following traversal method:

1. Descend into the rbtree normally to find the immediate neighboring
PA. Here we keep descending irrespective of if the PA is deleted or if
it overlaps with our request etc. The goal is to find an immediately
adjacent PA.

2. If the found PA is on right of original goal, use rb_prev() to find
the left adjacent PA.

3. Check if this PA is deleted and keep moving left with rb_prev() until
a non deleted PA is found.

4. This is the PA we are looking for. Now we can check if it can satisfy
the original request and proceed accordingly.

This approach also takes care of having deleted PAs in the tree.

(While we are at it, also fix a possible overflow bug in calculating the
end of a PA)

[1] https://lore.kernel.org/linux-ext4/CA+G9fYv2FRpLqBZf34ZinR8bU2_ZRAUOjKAD3+tKRFaEQHtt8Q@mail.gmail.com/

Cc: stable@kernel.org # 6.4
Fixes: 3872778664e3 ("ext4: Use rbtrees to manage PAs instead of inode i_prealloc_list")
Signed-off-by: Ojaswin Mujoo <ojaswin@linux.ibm.com>
Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Reviewed-by: Ritesh Harjani (IBM) ritesh.list@gmail.com
Tested-by: Ritesh Harjani (IBM) ritesh.list@gmail.com
Link: https://lore.kernel.org/r/edd2efda6a83e6343c5ace9deea44813e71dbe20.1690045963.git.ojaswin@linux.ibm.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2023-07-23 08:21:14 -04:00
Ojaswin Mujoo
5d5460fa79 ext4: fix off by one issue in ext4_mb_choose_next_group_best_avail()
In ext4_mb_choose_next_group_best_avail(), we want the start order to be
1 less than goal length and the min_order to be, at max, 1 more than the
original length. This commit fixes an off by one issue that arose due to
the fact that 1 << fls(n) > (n).

After all the processing:

order = 1 order below goal len
min_order = maximum of the three:-
             - order - trim_order
             - 1 order below B2C(s_stripe)
             - 1 order above original len

Cc: stable@kernel.org
Fixes: 33122aa930 ("ext4: Add allocation criteria 1.5 (CR1_5)")
Signed-off-by: Ojaswin Mujoo <ojaswin@linux.ibm.com>
Link: https://lore.kernel.org/r/20230609103403.112807-1-ojaswin@linux.ibm.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2023-07-23 08:21:14 -04:00
Eric Whitney
6909cf5c41 ext4: correct inline offset when handling xattrs in inode body
When run on a file system where the inline_data feature has been
enabled, xfstests generic/269, generic/270, and generic/476 cause ext4
to emit error messages indicating that inline directory entries are
corrupted.  This occurs because the inline offset used to locate
inline directory entries in the inode body is not updated when an
xattr in that shared region is deleted and the region is shifted in
memory to recover the space it occupied.  If the deleted xattr precedes
the system.data attribute, which points to the inline directory entries,
that attribute will be moved further up in the region.  The inline
offset continues to point to whatever is located in system.data's former
location, with unfortunate effects when used to access directory entries
or (presumably) inline data in the inode body.

Cc: stable@kernel.org
Signed-off-by: Eric Whitney <enwlinux@gmail.com>
Link: https://lore.kernel.org/r/20230522181520.1570360-1-enwlinux@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2023-07-23 08:21:05 -04:00
Linus Torvalds
c6b0271053 \n
-----BEGIN PGP SIGNATURE-----
 
 iQEzBAABCAAdFiEEq1nRK9aeMoq1VSgcnJ2qBz9kQNkFAmScT18ACgkQnJ2qBz9k
 QNnlqAf/bIU+I3Qd3EUpzWrOXEyRjaUggRnb4ibIH2I6DjSAP4wtm5wiG/+wjDFe
 v+gdRd8PlAlHbZJvW3WUxeSzWendqd78i2lgwFN+s2QCVtQSUsNy7mtUvOL2b1zy
 Kf35vTNbkKE0TevoqHZmoT/mehSBj6Zt4k5POMalfxwnJHoVF25OqHEQQc8vnOjv
 as/uMaHVwK/Q0pMafTz8vt9Fogkdqe6A+qLLxTvG6iQKd2Z0NdYK2GxR0oTVhDOK
 Ly+h1evRldgOcrishrje00LZT8SznUQkWBjIpPN/HbXR1qc5Jk+BYJUqT2jg7zVd
 EW61U79nsaugpTUicpTUIluUZ7/QKA==
 =toKL
 -----END PGP SIGNATURE-----

Merge tag 'fs_for_v6.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs

Pull misc filesystem updates from Jan Kara:

 - Rewrite kmap_local() handling in ext2

 - Convert ext2 direct IO path to iomap (with some infrastructure tweaks
   associated with that)

 - Convert two boilerplate licenses in udf to SPDX identifiers

 - Other small udf, ext2, and quota fixes and cleanups

* tag 'fs_for_v6.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
  udf: Fix uninitialized array access for some pathnames
  ext2: Drop fragment support
  quota: fix warning in dqgrab()
  quota: Properly disable quotas when add_dquot_ref() fails
  fs: udf: udftime: Replace LGPL boilerplate with SPDX identifier
  fs: udf: Replace GPL 2.0 boilerplate license notice with SPDX identifier
  fs: Drop wait_unfrozen wait queue
  ext2_find_entry()/ext2_dotdot(): callers don't need page_addr anymore
  ext2_{set_link,delete_entry}(): don't bother with page_addr
  ext2_put_page(): accept any pointer within the page
  ext2_get_page(): saner type
  ext2: use offset_in_page() instead of open-coding it as subtraction
  ext2_rename(): set_link and delete_entry may fail
  ext2: Add direct-io trace points
  ext2: Move direct-io to use iomap
  ext2: Use generic_buffers_fsync() implementation
  ext4: Use generic_buffers_fsync_noflush() implementation
  fs/buffer.c: Add generic_buffers_fsync*() implementation
  ext2/dax: Fix ext2_setsize when len is page aligned
2023-06-29 13:39:51 -07:00
Linus Torvalds
53ea167b21 Various cleanups and bug fixes in ext4's extent status tree,
journalling, and block allocator subsystems.  Also improve performance
 for parallel DIO overwrites.
 -----BEGIN PGP SIGNATURE-----
 
 iQEzBAABCAAdFiEEK2m5VNv+CHkogTfJ8vlZVpUNgaMFAmSaIWAACgkQ8vlZVpUN
 gaODEAf9GLk68DvU9iOhgJ1p/lMIqtbY0vvB1aeiQg7Z99mk/Vc//R5qQvtO2oN5
 9G4OMSGKoUO0x9OlvDIw6za1BsE1pGHyBLmei7PO1JpHop6b6hKj+WQVPWb43v15
 TI0vIkWzwJI2eIxsTqvpMkgwZ3aNL9c52xFyjwk/6lAsw4y2wxEls/NZhhE2tAXF
 w/RFmI9RC/AZy1JX3VeruzeiSvAq+JAnsW8iNIoN5nBvWU7yXLA3b4mcoWWrCQ5E
 sKqOkhTeobhYsAie6dxGhri/JrL1HwPOpJ8SWWmrlLWXoMVx1rXxW3OnxIAEl9sz
 05n7Z+6LvI6aEk+rnjCqt4Z1cpIIEA==
 =cAq/
 -----END PGP SIGNATURE-----

Merge tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4

Pull ext4 updates from Ted Ts'o:
 "Various cleanups and bug fixes in ext4's extent status tree,
  journalling, and block allocator subsystems.

  Also improve performance for parallel DIO overwrites"

* tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (55 commits)
  ext4: avoid updating the superblock on a r/o mount if not needed
  jbd2: skip reading super block if it has been verified
  ext4: fix to check return value of freeze_bdev() in ext4_shutdown()
  ext4: refactoring to use the unified helper ext4_quotas_off()
  ext4: turn quotas off if mount failed after enabling quotas
  ext4: update doc about journal superblock description
  ext4: add journal cycled recording support
  jbd2: continue to record log between each mount
  jbd2: remove j_format_version
  jbd2: factor out journal initialization from journal_get_superblock()
  jbd2: switch to check format version in superblock directly
  jbd2: remove unused feature macros
  ext4: ext4_put_super: Remove redundant checking for 'sbi->s_journal_bdev'
  ext4: Fix reusing stale buffer heads from last failed mounting
  ext4: allow concurrent unaligned dio overwrites
  ext4: clean up mballoc criteria comments
  ext4: make ext4_zeroout_es() return void
  ext4: make ext4_es_insert_extent() return void
  ext4: make ext4_es_insert_delayed_block() return void
  ext4: make ext4_es_remove_extent() return void
  ...
2023-06-29 13:18:36 -07:00
Linus Torvalds
6e17c6de3d - Yosry Ahmed brought back some cgroup v1 stats in OOM logs.
- Yosry has also eliminated cgroup's atomic rstat flushing.
 
 - Nhat Pham adds the new cachestat() syscall.  It provides userspace
   with the ability to query pagecache status - a similar concept to
   mincore() but more powerful and with improved usability.
 
 - Mel Gorman provides more optimizations for compaction, reducing the
   prevalence of page rescanning.
 
 - Lorenzo Stoakes has done some maintanance work on the get_user_pages()
   interface.
 
 - Liam Howlett continues with cleanups and maintenance work to the maple
   tree code.  Peng Zhang also does some work on maple tree.
 
 - Johannes Weiner has done some cleanup work on the compaction code.
 
 - David Hildenbrand has contributed additional selftests for
   get_user_pages().
 
 - Thomas Gleixner has contributed some maintenance and optimization work
   for the vmalloc code.
 
 - Baolin Wang has provided some compaction cleanups,
 
 - SeongJae Park continues maintenance work on the DAMON code.
 
 - Huang Ying has done some maintenance on the swap code's usage of
   device refcounting.
 
 - Christoph Hellwig has some cleanups for the filemap/directio code.
 
 - Ryan Roberts provides two patch series which yield some
   rationalization of the kernel's access to pte entries - use the provided
   APIs rather than open-coding accesses.
 
 - Lorenzo Stoakes has some fixes to the interaction between pagecache
   and directio access to file mappings.
 
 - John Hubbard has a series of fixes to the MM selftesting code.
 
 - ZhangPeng continues the folio conversion campaign.
 
 - Hugh Dickins has been working on the pagetable handling code, mainly
   with a view to reducing the load on the mmap_lock.
 
 - Catalin Marinas has reduced the arm64 kmalloc() minimum alignment from
   128 to 8.
 
 - Domenico Cerasuolo has improved the zswap reclaim mechanism by
   reorganizing the LRU management.
 
 - Matthew Wilcox provides some fixups to make gfs2 work better with the
   buffer_head code.
 
 - Vishal Moola also has done some folio conversion work.
 
 - Matthew Wilcox has removed the remnants of the pagevec code - their
   functionality is migrated over to struct folio_batch.
 -----BEGIN PGP SIGNATURE-----
 
 iHUEABYIAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCZJejewAKCRDdBJ7gKXxA
 joggAPwKMfT9lvDBEUnJagY7dbDPky1cSYZdJKxxM2cApGa42gEA6Cl8HRAWqSOh
 J0qXCzqaaN8+BuEyLGDVPaXur9KirwY=
 =B7yQ
 -----END PGP SIGNATURE-----

Merge tag 'mm-stable-2023-06-24-19-15' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm

Pull mm updates from Andrew Morton:

 - Yosry Ahmed brought back some cgroup v1 stats in OOM logs

 - Yosry has also eliminated cgroup's atomic rstat flushing

 - Nhat Pham adds the new cachestat() syscall. It provides userspace
   with the ability to query pagecache status - a similar concept to
   mincore() but more powerful and with improved usability

 - Mel Gorman provides more optimizations for compaction, reducing the
   prevalence of page rescanning

 - Lorenzo Stoakes has done some maintanance work on the
   get_user_pages() interface

 - Liam Howlett continues with cleanups and maintenance work to the
   maple tree code. Peng Zhang also does some work on maple tree

 - Johannes Weiner has done some cleanup work on the compaction code

 - David Hildenbrand has contributed additional selftests for
   get_user_pages()

 - Thomas Gleixner has contributed some maintenance and optimization
   work for the vmalloc code

 - Baolin Wang has provided some compaction cleanups,

 - SeongJae Park continues maintenance work on the DAMON code

 - Huang Ying has done some maintenance on the swap code's usage of
   device refcounting

 - Christoph Hellwig has some cleanups for the filemap/directio code

 - Ryan Roberts provides two patch series which yield some
   rationalization of the kernel's access to pte entries - use the
   provided APIs rather than open-coding accesses

 - Lorenzo Stoakes has some fixes to the interaction between pagecache
   and directio access to file mappings

 - John Hubbard has a series of fixes to the MM selftesting code

 - ZhangPeng continues the folio conversion campaign

 - Hugh Dickins has been working on the pagetable handling code, mainly
   with a view to reducing the load on the mmap_lock

 - Catalin Marinas has reduced the arm64 kmalloc() minimum alignment
   from 128 to 8

 - Domenico Cerasuolo has improved the zswap reclaim mechanism by
   reorganizing the LRU management

 - Matthew Wilcox provides some fixups to make gfs2 work better with the
   buffer_head code

 - Vishal Moola also has done some folio conversion work

 - Matthew Wilcox has removed the remnants of the pagevec code - their
   functionality is migrated over to struct folio_batch

* tag 'mm-stable-2023-06-24-19-15' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (380 commits)
  mm/hugetlb: remove hugetlb_set_page_subpool()
  mm: nommu: correct the range of mmap_sem_read_lock in task_mem()
  hugetlb: revert use of page_cache_next_miss()
  Revert "page cache: fix page_cache_next/prev_miss off by one"
  mm/vmscan: fix root proactive reclaim unthrottling unbalanced node
  mm: memcg: rename and document global_reclaim()
  mm: kill [add|del]_page_to_lru_list()
  mm: compaction: convert to use a folio in isolate_migratepages_block()
  mm: zswap: fix double invalidate with exclusive loads
  mm: remove unnecessary pagevec includes
  mm: remove references to pagevec
  mm: rename invalidate_mapping_pagevec to mapping_try_invalidate
  mm: remove struct pagevec
  net: convert sunrpc from pagevec to folio_batch
  i915: convert i915_gpu_error to use a folio_batch
  pagevec: rename fbatch_count()
  mm: remove check_move_unevictable_pages()
  drm: convert drm_gem_put_pages() to use a folio_batch
  i915: convert shmem_sg_free_table() to use a folio_batch
  scatterlist: add sg_set_folio()
  ...
2023-06-28 10:28:11 -07:00
Theodore Ts'o
2ef6c32a91 ext4: avoid updating the superblock on a r/o mount if not needed
This was noticed by a user who noticied that the mtime of a file
backing a loopback device was getting bumped when the loopback device
is mounted read/only.  Note: This doesn't show up when doing a
loopback mount of a file directly, via "mount -o ro /tmp/foo.img
/mnt", since the loop device is set read-only when mount automatically
creates loop device.  However, this is noticeable for a LUKS loop
device like this:

% cryptsetup luksOpen /tmp/foo.img test
% mount -o ro /dev/loop0 /mnt ; umount /mnt

or, if LUKS is not in use, if the user manually creates the loop
device like this:

% losetup /dev/loop0 /tmp/foo.img
% mount -o ro /dev/loop0 /mnt ; umount /mnt

The modified mtime causes rsync to do a rolling checksum scan of the
file on the local and remote side, incrementally increasing the time
to rsync the not-modified-but-touched image file.

Fixes: eee00237fa5e ("ext4: commit super block if fs record error when journal record without error")
Cc: stable@kernel.org
Link: https://lore.kernel.org/r/ZIauBR7YiV3rVAHL@glitch
Reported-by: Sean Greenslade <sean@seangreenslade.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2023-06-26 19:36:45 -04:00
Chao Yu
c4d13222af ext4: fix to check return value of freeze_bdev() in ext4_shutdown()
freeze_bdev() can fail due to a lot of reasons, it needs to check its
reason before later process.

Fixes: 783d94854499 ("ext4: add EXT4_IOC_GOINGDOWN ioctl")
Cc: stable@kernel.org
Signed-off-by: Chao Yu <chao@kernel.org>
Link: https://lore.kernel.org/r/20230606073203.1310389-1-chao@kernel.org
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2023-06-26 19:36:44 -04:00