IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
When the call to hw_params for a component fails, the error code is held
by the variable '__ret' but the error message displays the value held by
the variable 'ret'. Fix the return code shown when hw_params fails for
a component.
Fixes: b8135864d4d3 ("ASoC: snd_soc_component_driver has snd_pcm_ops")
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
We have several Lenovo AIOs like M810z, M820z and M920z, they have
the same design for mic-mute hotkey and led and they use the same
codec with the same pin configuration, so use the pin conf table to
apply fix to all of them.
Fixes: 29693efcea0f ("ALSA: hda - Fix micmute hotkey problem for a lenovo AIO machine")
Cc: <stable@vger.kernel.org>
Signed-off-by: Hui Wang <hui.wang@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Added a new helper file for these fixups due to requiring a huge number
of coefs being set to get the top speakers to work, as well as
setting pin 0x17 for the top speakers and the correct input source
of 0x17 for volume control
[ Note: this is a revised work based on Tom's fixup patch with the
replacement of the full COEF tables provided by Realtek.
Also, the fixup function has a proper HDA_FIXUP_ACT_* handling now.
The credit for the new COEF table goes to Kailang -- tiwai ]
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=189331
Cc: Kailang Yang <kailang@realtek.com>
Signed-off-by: Tom Briden <tom@decompile.me.uk>
Tested-by: Tom Briden <tom@decompile.me.uk>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This patch adds support for the Atmel I2S controller embedded into
sama5d2x SoCs.
Signed-off-by: Cyrille Pitchen <cyrille.pitchen@atmel.com>
Signed-off-by: Codrin Ciubotariu <codrin.ciubotariu@microchip.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch adds TX and RX TDM mixers for 40 TDM ports.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
All the mixer controls are pretty much same from all the afe ports.
Make these as proper macros for 2 reasons.
1> To avoid any typos in adding new mixer controls for each port.
2> Easy to edit from single place, easy to add new ports
This also prepares the routing driver to accomdate 40 tdm dais.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch adds support to 40 TDM ports supported in AFE.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
Use common q6afe_dai_prepare() for MI2S dais, this will remove
some code duplication. Also make the if statement to switch to
make the code look neater.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch adds support to tdm ports in AFE.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
We should set BE symmetric constraint on FE substream.
in case one BE is used by two FE1/FE2,
the first BE runtime will use FE1's substream->runtime.
hence the FE1's will be constrained by BE symmetry property.
Though, second FE2 call dpcm_apply_symmetry,
the be_substream->runtime == FE1's substream->runtime.
The FE2's substream->runtime will not be constrained
by BE's symmetry property.
Signed-off-by: KaiChieh Chuang <kaichieh.chuang@mediatek.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
In case, one BE is used by two FE1/FE2
FE1--->BE-->
|
FE2----]
when FE1/FE2 call dpcm_be_dai_hw_free() together
the BE users will be 2 (> 1), hence cannot be hw_free
the be state will leave at, ex. SND_SOC_DPCM_STATE_STOP
later FE1/FE2 call dpcm_be_dai_shutdown(),
will be skip due to wrong state.
leaving the BE not being hw_free and shutdown.
The BE dai will be hw_free later when calling
dpcm_be_dai_shutdown() if still in invalid state.
Signed-off-by: KaiChieh Chuang <kaichieh.chuang@mediatek.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
channel 1: SYSMEM<->ACP
channel 2: ACP<->I2S
Instead of waiting on period interrupt of ch 2 and then starting
dma on ch1, we make ch1 dma as circular.
This removes dependency of period granularity on hw pointer.
Signed-off-by: Akshu Agrawal <akshu.agrawal@amd.com>
Reviewed-by: Daniel Kurtz <djkurtz@chromium.org>
Tested-by: Daniel Kurtz <djkurtz@chromium.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
Add a quirk for the ARCHOS 80 Cesium 8" windows tablet, this device mostly
works with the default settings, except that it has only one speaker.
So add a quirk with the default settings + the mono-speaker flag.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch adds the mute LED control for HP Spectre x360 Kabylake
model. The mute LED is controlled via VREF bits on NID 0x1b, so we
need a new fixup function.
Note that this doesn't fix the other issues like the missing speaker
output on the machine. They will be addressed by later patches.
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=189331
Signed-off-by: Tom Briden <tom@decompile.me.uk>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Currently, USB-audio driver allocates the PCM buffer via vmalloc(), as
this serves merely as an intermediate buffer that is copied to each
URB transfer buffer. This works well in general on x86, but on some
archs this may result in cache coherency issues when mmap is used.
OTOH, it works also on such arch unless mmap is used.
This patch is a step for mitigating the inconvenience; a new module
option "use_vmalloc" is provided so that user can choose to allocate
the DMA coherent buffer instead of the existing vmalloc buffer.
The drawback is that it'd be the standard dma_alloc_coherent() calls
and the system would require contiguous pages on non-x86 archs.
Note that it's a global option and not dynamically switchable since
the buffer is pre-allocated at the probe time. In theory, it's
possible to be switchable, but it'd be trickier and racier.
As default use_vmalloc option is set to true, so that the old behavior
is kept. For allowing the coherent mmap on ARM or MIPS, pass
use_vmalloc=0 option explicitly.
Reported-and-tested-by: Daniel Danzberger <daniel@dd-wrt.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Power-saving is causing a humming sound when active on the Intel
NUC5i7RY, add it to the blacklist.
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=199607
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
gcc-8 warns that pcm_instance->name is not necessarily terminated correctly
if the input is more than 80 characters long or lacks a termination byte
itself:
In function 'strncpy',
inlined from 'cfg_device' at sound/xen/xen_snd_front_cfg.c:399:3,
inlined from 'xen_snd_front_cfg_card' at sound/xen/xen_snd_front_cfg.c:509:9:
include/linux/string.h:254:9: error: '__builtin_strncpy' specified bound 80 equals destination size [-Werror=stringop-truncation]
return __builtin_strncpy(p, q, size);
Using strlcpy() instead of strncpy() makes this a bit safer.
Fixes: fd3b36045c2c ("ALSA: xen-front: Read sound driver configuration from Xen store")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Simplify the device management by replacing the lowlevel device object
allocation with the card->private_data. Nowadays there is almost no
advantage by the lowlevel device, and with card->private_data, the
code becomes cleaner.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Avoid if ((err = ...) style and expand to multiple lines instead.
No change in the end result, but just the beautification.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
... so that we can avoid the extra goto lines.
Also beautify the code to follow the standard codex.
No functional changes.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The stream direction in open and close callbacks can be retrieved from
substream->direction, hence we don't have to stick with the unique PCM
ops hard-coded for each direction. Rewrite the common open/close
callback functions.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The negative error return from the call to to_sndif_format is being
assigned to an unsigned 8 bit integer and hence the check for a negative
value is always going to be false. Fix this by using ret as the error
return and hence the negative error can be detected and assign
the u8 sndif_format to ret if there is no error.
Detected by CoverityScan, CID#1469385 ("Unsigned compared against 0")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Takashi Sakamoto <o-takashi@sakamoccchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The error for a -ve value in ret is redundant as all previous
assignments to ret have an associated -ve check and hence it
is impossible for ret to be less that zero at the point of the
check. Remove this redundant error check.
Detected by CoveritScan, CID#1469407 ("Logically Dead code")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Convert the S_<FOO> symbolic permissions to their octal equivalents as
using octal and not symbolic permissions is preferred by many as more
readable.
see: https://lkml.org/lkml/2016/8/2/1945
Done with automated conversion via:
$ ./scripts/checkpatch.pl -f --types=SYMBOLIC_PERMS --fix-inplace <files...>
Miscellanea:
o Wrapped one multi-line call to a single line
Signed-off-by: Joe Perches <joe@perches.com>
Acked-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
At present, all of models produced by TC Electronic except for Konnekt Live
are supported with hard-coded their stream formats. Studio Konnekt 48 is
sore model to support dual streams for both directions. The second stream
has no MIDI conformant data channel in its data block. But current
implementation transfers the second stream with MIDI conformant data
channel.
This commit fixes this issue.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This series contains two omap1 ams-delta GPIO clean-up patches to get
started with removal of hard-coded GPIO numbers from drivers. And then
the removal of board mach includes from drivers. The second patch mostly
touches the ams-delta audio driver but is included here because of the
removal of the latch gpios and is acked by Mark Brown.
And there are two more am437x related PM patches to save and restore
control module and timer registers for RTC only suspend mode. Looks like
the patch title for the timer changes is a bit misleading, not all the
timer code is yet living under drivers/clocksource. But I had already
pushed out the branch before I noticed this.
-----BEGIN PGP SIGNATURE-----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=gBpR
-----END PGP SIGNATURE-----
Merge tag 'omap-for-v4.18/soc-late-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/soc
Late omap soc changes for v4.18 merge window
This series contains two omap1 ams-delta GPIO clean-up patches to get
started with removal of hard-coded GPIO numbers from drivers. And then
the removal of board mach includes from drivers. The second patch mostly
touches the ams-delta audio driver but is included here because of the
removal of the latch gpios and is acked by Mark Brown.
And there are two more am437x related PM patches to save and restore
control module and timer registers for RTC only suspend mode. Looks like
the patch title for the timer changes is a bit misleading, not all the
timer code is yet living under drivers/clocksource. But I had already
pushed out the branch before I noticed this.
* tag 'omap-for-v4.18/soc-late-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
OMAP: CLK: CLKSRC: Add suspend resume hooks
ARM: AM43XX: Add functions to save/restore am43xx control registers
ASoC: ams_delta: use GPIO lookup table
ARM: OMAP1: ams-delta: add GPIO lookup tables
Signed-off-by: Olof Johansson <olof@lixom.net>
In MediaTek SoC chip we have multiple DAI,
such as I2S, ADDA, PCM, etc.
Organize each DAI in to one sub dai,
with its dai driver, controls, widgets, routes.
add mtk_afe_combine_sub_dai() to combine
dai driver from each DAI.
add mtk_afe_add_sub_dai_control() to register
the control, widget, routes to component.
Signed-off-by: KaiChieh Chuang <kaichieh.chuang@mediatek.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
The newly introduced driver causes a harmless Kconfig warning when
compile-testing random configurations:
WARNING: unmet direct dependencies detected for SND_SDMA_SOC
Depends on [n]: SOUND [=y] && !UML && SND [=y] && SND_SOC [=y] && DMA_OMAP [=n]
Selected by [y]:
- SND_OMAP_SOC [=y] && SOUND [=y] && !UML && SND [=y] && SND_SOC [=y] && (ARCH_OMAP [=y] && DMA_OMAP [=n] || ARM [=y] && COMPILE_TEST [=y])
By simply allow build testing without DMA_OMAP, we can shut up that warning.
Fixes: dde637f2daf1 ("ASoC: omap: Introduce the generic_dmaengine_pcm based sdma-pcm")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
Before commit 3b5b899ca67d ("ALSA: hda: Make use of core codec functions
to sync power state"), hda_set_power_state() returned the response to
the Get Power State verb, a 32-bit unsigned integer whose expected value
is 0x233 after transitioning a codec to D3, and 0x0 after transitioning
it to D0.
The response value is significant because hda_codec_runtime_suspend()
does not clear the codec's bit in the codec_powered bitmask unless the
AC_PWRST_CLK_STOP_OK bit (0x200) is set in the response value. That in
turn prevents the HDA controller from runtime suspending because
azx_runtime_idle() checks that the codec_powered bitmask is zero.
Since commit 3b5b899ca67d, hda_set_power_state() only returns 0x0 or
0x1, thereby breaking runtime PM for any HDA controller. That's because
an inline function introduced by the commit returns a bool instead of a
32-bit unsigned int. The change was likely erroneous and resulted from
copying and pasting snd_hda_check_power_state(), which is immediately
preceding the newly introduced inline function. Fix it.
Link: https://bugs.freedesktop.org/show_bug.cgi?id=106597
Fixes: 3b5b899ca67d ("ALSA: hda: Make use of core codec functions to sync power state")
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Abhijeet Kumar <abhijeet.kumar@intel.com>
Reported-and-tested-by: Gunnar Krüger <taijian@posteo.de>
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Drop pci_device() macro that just leads to chip->pci->dev, and pass it
directly to request_firmware(). It was introduced for allowing the
external alsa-driver kernel module builds. Since it was discontinued
years ago, we should clean it up now.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Drop the superfluous #ifndef checks that had been put just for
allowing building the alsa-driver kernel modules externally.
Since the external build was discontinued years ago, let's clean up
the old kludges.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Now as the Amstrad Delta board provides GPIO lookup tables, switch from
GPIO numbers to GPIO descriptors and use the table to locate required
GPIO pins.
The card uses two pins, one for jack and the other for voice modem
codec DAI control.
For jack pin, remove hardcoded GPIO number and use GPIO descriptor
based variant of jack GPIO initialization.
For modem_codec pin, declare static variable for storing its GPIO
descriptor, obtain it on card initialization and replace obsolete
ams_delta_latch2_write() with gpiod_set_value(). For that to work,
don't request the modem_codec pin from the board init code anymore.
If the modem_codec GPIO lookup fails, skip initialization of
functionality of the card which depends on its availability.
Pin naming used by the driver should be followed while respective GPIO
lookup table is initialized by a board init code.
Created and tested against linux-4.17-rc3, on top of patch 1/6 "ARM:
OMAP1: ams-delta: add GPIO lookup tables"
Signed-off-by: Janusz Krzysztofik <jmkrzyszt@gmail.com>
Acked-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Power-saving is causing plops on audio start/stop on ASRock H81M-HDS
machines, add these to the power_save blacklist.
BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1525104
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Power-saving is causing plops on audio start/stop on Gigabyte
P55A-UD3 and Gigabyte Z87-D3HP machines, add these to the power_save
blacklist.
Note these 2 boards both use 1458:a002 as subsystem ids, so they share
a single entry.
BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1525104
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Power-saving is causing a plop and silences the first 2 seconds
(give or take) of audio, silencing notifications sounds on Medion /
Clevo W35xSS_370SS laptops.
Add the Clevo W35xSS_370SS to the power_save blacklist.
BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1581607
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Power-saving is causing a humming sound when active on the Intel
NUC7i3BNB, add it to the blacklist.
BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1520902
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The nau8824 codec can detect whether a headset or plain headphones is
inserted (as well as button presses on the headset) as such the jack_type
passed to snd_soc_card_jack_new() should include SND_JACK_MICROPHONE.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
some monitors care about the parity bit in the sub-frame of I2S,
but the cdn-dp always set this bit to "1", so these monitors
do not have sound output if use i2s, use spdif can fix this issue.
Signed-off-by: Chris Zhong <zyw@rock-chips.com>
Signed-off-by: Lin Huang <hl@rock-chips.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
HP Z2 G4 requires the same workaround as other HP machines that have
no mic-pin detection.
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
FOr platforms that use the simple-card driver, the codec cannot be selected
through 'select' magic in Kconfig. So turn this into a real config option.
Signed-off-by: Daniel Mack <daniel@zonque.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
This is needed when the codec is instanciated from from a device tree.
Signed-off-by: Daniel Mack <daniel@zonque.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
There's no need to read the register again prior to writing it, we did
that in the beginning of the function.
Signed-off-by: Daniel Mack <daniel@zonque.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
