IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
SDX55 and SDX65 DTS takes clocks in a bit different order. Adjust
bindings to the DTS.
Fixes: 0d17014e9189 ("dt-bindings: mailbox: Add binding for SDX55 APCS")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Acked-by: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230322173559.809805-1-krzysztof.kozlowski@linaro.org
Support for PRU clients to acquire a control reference to the PRU
instances is introduced, and the PRU now allows specifying firmware-name
in Devicetree. sysfs is requested to be read-only when the remoteproc
instance is consumed by another kernel driver.
Support for the C7xv DSP on AM62A SoC is introduced.
The Devicetree binding for the Qualcomm PAS devices are split up in
multiple files, to better account for the differences in resources
between them. A number of missing Devicetree bindings are added, and the
Qualcomm WCNSS binding is converted to YAML.
A few cleanups are introduced for the Mediatek SCP driver. And a sanity
check of the firmware image is introduced in the Mediatek driver.
For Qualcomm SC7280 ADSP support is added, MSM8953 gains ADSP and modem
support, SM6115 and SM8550 gains ADSP, CDSP and modem support, and
support for pronto v3 support (used on e.g. MSM8953) is added.
The Qualcomm modem remoteproc driver is modified to use a no-map
reserved-memory region for it's authentication metadata, in order to
avoid fatal security violations caused by accesses from Linux during
the authentication process.
Support for separate loading of a Devicetree blob is added to the PAS
driver, and support for the PAS driver to carve out DSM memory for the
modem is added as well.
The Qualcomm ADSP remoteproc driver gains support for mapping memory
into specific range using the IOMMU. The sysmon driver is transitioned
to strlcpy()
-----BEGIN PGP SIGNATURE-----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=clXY
-----END PGP SIGNATURE-----
Merge tag 'rproc-v6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux
Pull remoteproc updates from Bjorn Andersson:
- Support for PRU clients to acquire a control reference to the PRU
instances is introduced, and the PRU now allows specifying
firmware-name in Devicetree. sysfs is requested to be read-only when
the remoteproc instance is consumed by another kernel driver
- Support for the C7xv DSP on AM62A SoC is introduced
- The Devicetree binding for the Qualcomm PAS devices are split up in
multiple files, to better account for the differences in resources
between them. A number of missing Devicetree bindings are added, and
the Qualcomm WCNSS binding is converted to YAML
- A few cleanups are introduced for the Mediatek SCP driver. And a
sanity check of the firmware image is introduced in the Mediatek
driver
- For Qualcomm SC7280 ADSP support is added, MSM8953 gains ADSP and
modem support, SM6115 and SM8550 gains ADSP, CDSP and modem support,
and support for pronto v3 support (used on e.g. MSM8953) is added
- The Qualcomm modem remoteproc driver is modified to use a no-map
reserved-memory region for it's authentication metadata, in order to
avoid fatal security violations caused by accesses from Linux during
the authentication process
- Support for separate loading of a Devicetree blob is added to the PAS
driver, and support for the PAS driver to carve out DSM memory for
the modem is added as well
- The Qualcomm ADSP remoteproc driver gains support for mapping memory
into specific range using the IOMMU. The sysmon driver is
transitioned to strlcpy()
* tag 'rproc-v6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux: (69 commits)
dt-bindings: mailbox: qcom,apcs-kpss-global: drop mbox-names from example
dt-bindings: remoteproc: qcom,glink-edge: correct label description
dt-bindings: remoteproc: qcom,glink-rpm-edge: convert to DT schema
dt-bindings: remoteproc: qcom,sm8550-pas: correct power domains
remoteproc: qcom_q6v5_pas: enable sm8550 adsp & cdsp autoboot
dt-bindings: remoteproc: qcom: Add sm6115 pas yaml file
remoteproc: qcom: pas: Add sm6115 remoteprocs
remoteproc: qcom: pas: Adjust the phys addr wrt the mem region
remoteproc: qcom: fix sparse warnings
remoteproc: qcom: replace kstrdup with kstrndup
remoteproc: mediatek: Check the SCP image format
remoteproc: qcom_q6v5_mss: Use a carveout to authenticate modem headers
Revert "remoteproc: qcom_q6v5_mss: map/unmap metadata region before/after use"
dt-bindings: remoteproc: qcom,sc7280-mss-pil: Update memory-region
dt-bindings: remoteproc: qcom,sc7180-mss-pil: Update memory-region
dt-bindings: remoteproc: qcom,msm8996-mss-pil: Update memory region
dt-bindings: remoteproc: qcom,q6v5: Move MSM8996 to schema
remoteproc: qcom_q6v5_pas: add sm8550 adsp, cdsp & mpss compatible & data
remoteproc: qcom_q6v5_pas: add support for assigning memory to firmware
remoteproc: qcom_q6v5_pas: add support for dtb co-firmware loading
...
Document the compatible for the QDU1000 mailbox.
Signed-off-by: Melody Olvera <quic_molvera@quicinc.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
Add the mailbox compatible for the IPQ5332 SoC.
Since the IPQ5332 mailbox is compatible with the IPQ6018, lets create the
fallback to ipq6018 compatible, so that we don't bloat the of_device_id
table in the driver.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Kathiravan T <quic_kathirav@quicinc.com>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
Add the #clock-cells property to the MSM8996 example, as the APCS block
is going to provide the `sys_apcs_aux' clock to the consumers.
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
Add missing platforms to the conditional clauses selecting whether the
clocks/clock-names properties are required or whether they must be
omitted.
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
The schema incorrectly lists some of the platforms in the statement
requiring clocks/clock-names. Correct this by moving platforms not
requiring additional clocks to the separate clause.
Fixes: 0d17014e9189 ("dt-bindings: mailbox: Add binding for SDX55 APCS")
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
On msm8976 platform APCS also uses syscon compatible, so move it to the
block of compatibles using SoC-compat together with syscon.
Fixes: 60545466180e ("dt-bindings: mailbox: qcom,apcs-kpss-global: Add syscon const for relevant entries")
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
The commit 0d17014e9189 ("dt-bindings: mailbox: Add binding for SDX55
APCS") added SDX55 compatible string to one of clock-selection
conditions, but failed to add one to the main schema's compatible list.
Fix this omission.
Fixes: 0d17014e9189 ("dt-bindings: mailbox: Add binding for SDX55 APCS")
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
Add a compatible for the ipcc on sa8775p platforms.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
Qualcomm G-Link RPM edge bindings do not allow and do not use mbox-names
property.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230208101545.45711-4-krzysztof.kozlowski@linaro.org
- ti: default to ARCH_K3 for msg manager
- mediatek: add mt8188 and mt8186 support
request irq only after got ready
- zynq-ipi: fix error handling after device_register
- mpfs: check sys-con status
- rockchip: simplify by using device_get_match_data
-----BEGIN PGP SIGNATURE-----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=j33p
-----END PGP SIGNATURE-----
Merge tag 'mailbox-v6.2' of git://git.linaro.org/landing-teams/working/fujitsu/integration
Pull mailbox updates from Jassi Brar:
- qcom: enable sc8280xp, sm8550 and sm4250 support
- ti: default to ARCH_K3 for msg manager
- mediatek:
- add mt8188 and mt8186 support
- request irq only after got ready
- zynq-ipi: fix error handling after device_register
- mpfs: check sys-con status
- rockchip: simplify by using device_get_match_data
* tag 'mailbox-v6.2' of git://git.linaro.org/landing-teams/working/fujitsu/integration:
dt-bindings: mailbox: qcom-ipcc: Add compatible for SM8550
mailbox: mtk-cmdq: Do not request irq until we are ready
mailbox: zynq-ipi: fix error handling while device_register() fails
mailbox: mtk-cmdq-mailbox: Use platform data directly instead of copying
mailbox: arm_mhuv2: Fix return value check in mhuv2_probe()
dt-bindings: mailbox: mediatek,gce-mailbox: add mt8188 compatible name
dt-bindings: mailbox: add GCE header file for mt8188
mailbox: mpfs: read the system controller's status
mailbox: mtk-cmdq: add MT8186 support
mailbox: mtk-cmdq: add gce ddr enable support flow
mailbox: mtk-cmdq: add gce software ddr enable private data
mailbox: mtk-cmdq: Use GCE_CTRL_BY_SW definition instead of number
mailbox: rockchip: Use device_get_match_data() to simplify the code
dt-bindings: mailbox: qcom-ipcc: Add sc8280xp compatible
mailbox: config: ti-msgmgr: Default set to ARCH_K3 for TI msg manager
mailbox: qcom-apcs-ipc: Add SM4250 APCS IPC support
dt-bindings: mailbox: qcom: Add SM4250 APCS compatible
Document the compatible for SM8550 mailbox.
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
Add mt8188 compatible name.
Signed-off-by: Elvis Wang <Elvis.Wang@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno<angelogioacchino.delregno@collabora.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
Document the sc8280xp compatible, and at the same time also make sure
the list is sorted alphabetically.
Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
The Devicetree bindings document does not have to say in the title that
it is a "binding", but instead just describe the hardware.
Drop trailing "bindings" in various forms (also with trailing full
stop):
find Documentation/devicetree/bindings/ -type f -name '*.yaml' \
-not -name 'trivial-devices.yaml' \
-exec sed -i -e 's/^title: \(.*\) [bB]indings\?\.\?$/title: \1/' {} \;
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Acked-by: Matti Vaittinen <mazziesaccount@gmail.com> # ROHM
Acked-by: Ulf Hansson <ulf.hansson@linaro.org> # MMC
Acked-by: Stephen Boyd <sboyd@kernel.org> # clk
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> # input
Acked-by: Mark Brown <broonie@kernel.org>
Acked-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> # media
Acked-by: Sebastian Reichel <sre@kernel.org> # power
Acked-by: Viresh Kumar <viresh.kumar@linaro.org> # cpufreq
Link: https://lore.kernel.org/r/20221216163815.522628-7-krzysztof.kozlowski@linaro.org
Signed-off-by: Rob Herring <robh@kernel.org>
DT core:
- Fix node refcounting in of_find_last_cache_level()
- Constify device_node in of_device_compatible_match()
- Fix 'dma-ranges' handling in bus controller nodes
- Fix handling of initrd start > end
- Improve error reporting in of_irq_init()
- Taint kernel on DT unittest running
- Use strscpy instead of strlcpy
- Add a build target, dt_compatible_check, to check for
compatible strings used in kernel sources against compatible strings
in DT schemas.
- Handle DT_SCHEMA_FILES changes when rebuilding
DT bindings:
- LED bindings for MT6370 PMIC
- Convert Mediatek mtk-gce mailbox, MIPS CPU interrupt controller,
mt7621 I2C, virtio,pci-iommu, nxp,tda998x, QCom fastrpc, qcom,pdc,
and arm,versatile-sysreg to DT schema format
- Add nvmem cells to u-boot,env schema
- Add more LED_COLOR_ID definitions
- Require 'opp-table' uses to be a node
- Various schema fixes to match QEMU 'virt' DT usage
- Tree wide dropping of redundant 'Device Tree Binding' in schema titles
- More (unevaluated|additional)Properties fixes in schema child nodes
- Drop various redundant minItems equal to maxItems
-----BEGIN PGP SIGNATURE-----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=IDIz
-----END PGP SIGNATURE-----
Merge tag 'devicetree-for-6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull devicetree updates from Rob Herring:
"DT core:
- Fix node refcounting in of_find_last_cache_level()
- Constify device_node in of_device_compatible_match()
- Fix 'dma-ranges' handling in bus controller nodes
- Fix handling of initrd start > end
- Improve error reporting in of_irq_init()
- Taint kernel on DT unittest running
- Use strscpy instead of strlcpy
- Add a build target, dt_compatible_check, to check for compatible
strings used in kernel sources against compatible strings in DT
schemas.
- Handle DT_SCHEMA_FILES changes when rebuilding
DT bindings:
- LED bindings for MT6370 PMIC
- Convert Mediatek mtk-gce mailbox, MIPS CPU interrupt controller,
mt7621 I2C, virtio,pci-iommu, nxp,tda998x, QCom fastrpc, qcom,pdc,
and arm,versatile-sysreg to DT schema format
- Add nvmem cells to u-boot,env schema
- Add more LED_COLOR_ID definitions
- Require 'opp-table' uses to be a node
- Various schema fixes to match QEMU 'virt' DT usage
- Tree wide dropping of redundant 'Device Tree Binding' in schema
titles
- More (unevaluated|additional)Properties fixes in schema child nodes
- Drop various redundant minItems equal to maxItems"
* tag 'devicetree-for-6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (62 commits)
of: base: Shift refcount decrement in of_find_last_cache_level()
dt-bindings: leds: Add MediaTek MT6370 flashlight
dt-bindings: leds: mt6370: Add MediaTek MT6370 current sink type LED indicator
dt-bindings: mailbox: Convert mtk-gce to DT schema
of: base: make of_device_compatible_match() accept const device node
of: Fix "dma-ranges" handling for bus controllers
of: fdt: Remove unused struct fdt_scan_status
dt-bindings: display: st,stm32-dsi: Handle data-lanes in DSI port node
dt-bindings: timer: Add power-domains for TI timer-dm on K3
dt: Add a check for undocumented compatible strings in kernel
kbuild: take into account DT_SCHEMA_FILES changes while checking dtbs
dt-bindings: interrupt-controller: migrate MIPS CPU interrupt controller text bindings to YAML
dt-bindings: i2c: migrate mt7621 text bindings to YAML
dt-bindings: power: gpcv2: correct patternProperties
dt-bindings: virtio: Convert virtio,pci-iommu to DT schema
dt-bindings: timer: arm,arch_timer: Allow dual compatible string
dt-bindings: arm: cpus: Add kryo240 compatible
dt-bindings: display: bridge: nxp,tda998x: Convert to json-schema
dt-bindings: nvmem: u-boot,env: add basic NVMEM cells
dt-bindings: remoteproc: qcom,adsp: enforce smd-edge schema
...
IPQ6018 APSS driver is registered by APCS as they share the same register
space, and it uses "pll" and "xo" as inputs.
Correct the allowed clocks for IPQ6018 and IPQ8074 as they share the same
driver to allow "pll" and "xo" as clock-names.
Signed-off-by: Robert Marko <robimarko@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
IPQ6018 and IPQ8074 require #clock-cells to be set to 1 as their APSS
clock driver provides multiple clock outputs.
So allow setting 1 as #clock-cells and check that its set to 1 for IPQ6018
and IPQ8074, check others for 0 as its currently.
Signed-off-by: Robert Marko <robimarko@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
The "data" region of the PolarFire SoC's system controller mailbox is
not one continuous register space - the system controller's QSPI sits
between the control and data registers. Split the "data" reg into two
parts: "data" & "control".
Fixes: 213556235526 ("dt-bindings: soc/microchip: update syscontroller compatibles")
Fixes: ed9543d6f2c4 ("dt-bindings: add bindings for polarfire soc mailbox")
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
Convert the mtk-gce mailbox binding to DT schema format.
During the conversion, the examples for client device/mutex nodes
were removed, as these are found in their respective bindings:
arm/mediatek/mediatek,mmsys.yaml for "mediatek,mt8173-mmsys"
soc/mediatek/mediatek,mutex.yaml for "mediatek,mt8173-disp-mutex"
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220921090006.37642-1-angelogioacchino.delregno@collabora.com
Signed-off-by: Rob Herring <robh@kernel.org>
My professional e-mail will change and the BayLibre one will
bounce after mid-september of 2022.
This updates the MAINTAINERS file, the YAML bindings and adds an
entry in the .mailmap file.
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220816095617.948678-1-narmstrong@baylibre.com
The secure interrupt is only useful to secure world, therefore for NS
users it shouldn't be required. Make it optional.
This fixes a warning on Arm Juno board:
mhu@2b1f0000: interrupts: [[0, 36, 4], [0, 35, 4]] is too short
Signed-off-by: Rob Herring <robh@kernel.org>
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Link: https://lore.kernel.org/r/20220728190810.1290857-1-robh@kernel.org
Add a compatible for SM6375.
Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
i.MX MU has a MUR bit which is to reset both the Processor B and the
Processor A sides of the MU module, forcing all control and status
registers to return to their default values (except the BHR bit in the ACR
register and BHRM bit in BCR register), and all internal states to be
cleared.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
msm8916, msm8939, msm8953, msm8994 and qcs404 already declare or should
declare syscon as they have drivers that use syscon inside of the apcs-kpss
block.
grep apcs arch/arm64/boot/dts/qcom/* | grep syscon
Add in the additional syscon in the documentation for the above mentioned
parts.
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
- qcom: log pending irq during resume
minor cosmetic changes
- omap: use pm_runtime_resume_and_get
- imx: use pm_runtime_resume_and_get
remove redundant initializer
- mtk: added GCE header for MT8186
enable support for MT8186
- tegra: remove redundant NULL check
added hsp_sm_ops for send/recv api
support shared mailboxes
- stm: remove unsupported "wakeup" irq
- pcc: sanitize mbox allocated memory before use
- misc: documentation fixes for arm_mhu and qcom-ipcc
-
-----BEGIN PGP SIGNATURE-----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=f51u
-----END PGP SIGNATURE-----
Merge tag 'mailbox-v5.19' of git://git.linaro.org/landing-teams/working/fujitsu/integration
Pull mailbox updates from Jassi Brar:
"api:
- hrtimer fix
qcom:
- log pending irq during resume
- minor cosmetic changes
omap:
- use pm_runtime_resume_and_get
imx:
- use pm_runtime_resume_and_get
- remove redundant initializer
mtk:
- added GCE header for MT8186
- enable support for MT8186
tegra:
- remove redundant NULL check
- added hsp_sm_ops for send/recv api
- support shared mailboxes
stm:
- remove unsupported "wakeup" irq
pcc:
- sanitize mbox allocated memory before use
misc:
- documentation fixes for arm_mhu and qcom-ipcc"
* tag 'mailbox-v5.19' of git://git.linaro.org/landing-teams/working/fujitsu/integration:
mailbox: qcom-ipcc: Fix -Wunused-function with CONFIG_PM_SLEEP=n
mailbox: forward the hrtimer if not queued and under a lock
mailbox: qcom-ipcc: Log the pending interrupt during resume
mailbox: pcc: Fix an invalid-load caught by the address sanitizer
dt-bindings: mailbox: remove the IPCC "wakeup" IRQ
mailbox: correct kerneldoc
mailbox: omap: using pm_runtime_resume_and_get to simplify the code
mailbox:imx: using pm_runtime_resume_and_get
mailbox: mediatek: support mt8186 adsp mailbox
dt-bindings: mailbox: mtk,adsp-mbox: add mt8186 compatible name
mailbox: tegra-hsp: Add 128-bit shared mailbox support
dt-bindings: tegra186-hsp: add type for shared mailboxes
mailbox: tegra-hsp: Add tegra_hsp_sm_ops
dt-bindings: gce: add the GCE header file for MT8186
mailbox: remove an unneeded NULL check on list iterator
mailbox: imx: remove redundant initializer
dt-bindings: mailbox: qcom-ipcc: simplify the example
This reverts commit b20eee62ee89aba03261a1abac80f29abea5bdf5. The
example has just been removed altogether in the mailbox tree.
Reported-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Rob Herring <robh@kernel.org>
The stm32 ipcc mailbox driver supports only two interrupts (rx and tx), so
remove the unsupported "wakeup" one.
Signed-off-by: Fabien Dessenne <fabien.dessenne@foss.st.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
Tegra234 supports sending/receiving 32-bit and 128-bit data over
a shared mailbox. Based on the data size to be used, clients need
to specify the type of shared mailbox in the device tree.
Add a macro for 128-bit shared mailbox. Mailbox clients can use this
macro as a flag in device tree to enable 128-bit data support for a
shared mailbox.
Signed-off-by: Kartik <kkartik@nvidia.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
Consumer examples in the bindings of resource providers are trivial,
useless and duplicating code. Additionally the incomplete qcom,smp2p
example triggers DT schema warnings.
Cleanup the example by removing the consumer part and fixing the
indentation to DT schema convention.
Reported-by: Rob Herring <robh@kernel.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
These missing required properties are needed for
smp2p binding reference checks.
Also includes cosmetic change to the example formatting.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: David Heidelberg <david@ixit.cz>
Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220426101837.16201-2-david@ixit.cz
Remove trailing white-spaces and trailing blank lines (yamllint with
default options does not like them).
Suggested-by: Corentin Labbe <clabbe@baylibre.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220402192819.154691-1-krzysztof.kozlowski@linaro.org
Similar to i.MX8ULP S4 MU, i.MX93 MU is dedicated for communication
between Sentinel and Cortex-A cores from hardware design, it could not be
reused for other purpose.
However i.MX93 S4 MU use separate tx/rx interrupt, so update
interrupts and add interrupt-names property.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
Add bindings for i.MX93 MU which derived from i.MX8ULP
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
Similar to i.MX8QM/QXP SCU, i.MX8 SECO MU is dedicated for
communication between SECO and Cortex-A cores from hardware design,
it could not be reused for other purpose. To use SECO MU more
effectivly, add "fsl,imx8-mu-seco" compatile to support fast IPC.
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
This patch adds document for mediatek adsp mbox
Signed-off-by: Allen-KH Cheng <allen-kh.cheng@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
Add the mailbox compatible for the MSM8976 SoC.
Signed-off-by: Adam Skladowski <a39.skl@gmail.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
The Polarfire SoC is currently using two different compatible string
prefixes. Fix this by changing "polarfire-soc-*" strings to "mpfs-*" in
its system controller in order to match the compatible string used in
the soc binding and device tree
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Acked-by: Rob Herring <robh@kernel.org>
Acked-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Bindings:
- DT schema conversions for Samsung clocks, RNG bindings, Qcom Command
DB and rmtfs, gpio-restart, i2c-mux-gpio, i2c-mux-pinctl, Tegra I2C
and BPMP, pwm-vibrator, Arm DSU, and Cadence macb
- DT schema conversions for Broadcom platforms: interrupt controllers,
STB GPIO, STB waketimer, STB reset, iProc MDIO mux, iProc PCIe,
Cygnus PCIe PHY, PWM, USB BDC, BCM6328 LEDs, TMON, SYSTEMPORT, AMAC,
Northstar 2 PCIe PHY, GENET, moca PHY, GISB arbiter, and SATA
- Add binding schemas for Tegra210 EMC table, TI DC-DC converters,
- Clean-ups of MDIO bus schemas to fix 'unevaluatedProperties' issues
- More fixes due to 'unevaluatedProperties' enabling
- Data type fixes and clean-ups of binding examples found in preparation
to move to validating DTB files directly (instead of intermediate YAML
representation.
- Vendor prefixes for T-Head Semiconductor, OnePlus, and Sunplus
- Add various new compatible strings
DT core:
- Silence a warning for overlapping reserved memory regions
- Reimplement unittest overlay tracking
- Fix stack frame size warning in unittest
- Clean-ups of early FDT scanning functions
- Fix handling of "linux,usable-memory-range" on EFI booted systems
- Add support for 'fail' status on CPU nodes
- Improve error message in of_phandle_iterator_next()
- kbuild: Disable duplicate unit-address warnings for disabled nodes
-----BEGIN PGP SIGNATURE-----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=2g8v
-----END PGP SIGNATURE-----
Merge tag 'devicetree-for-5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull devicetree updates from Rob Herring:
"Bindings:
- DT schema conversions for Samsung clocks, RNG bindings, Qcom
Command DB and rmtfs, gpio-restart, i2c-mux-gpio, i2c-mux-pinctl,
Tegra I2C and BPMP, pwm-vibrator, Arm DSU, and Cadence macb
- DT schema conversions for Broadcom platforms: interrupt
controllers, STB GPIO, STB waketimer, STB reset, iProc MDIO mux,
iProc PCIe, Cygnus PCIe PHY, PWM, USB BDC, BCM6328 LEDs, TMON,
SYSTEMPORT, AMAC, Northstar 2 PCIe PHY, GENET, moca PHY, GISB
arbiter, and SATA
- Add binding schemas for Tegra210 EMC table, TI DC-DC converters,
- Clean-ups of MDIO bus schemas to fix 'unevaluatedProperties' issues
- More fixes due to 'unevaluatedProperties' enabling
- Data type fixes and clean-ups of binding examples found in
preparation to move to validating DTB files directly (instead of
intermediate YAML representation.
- Vendor prefixes for T-Head Semiconductor, OnePlus, and Sunplus
- Add various new compatible strings
DT core:
- Silence a warning for overlapping reserved memory regions
- Reimplement unittest overlay tracking
- Fix stack frame size warning in unittest
- Clean-ups of early FDT scanning functions
- Fix handling of "linux,usable-memory-range" on EFI booted systems
- Add support for 'fail' status on CPU nodes
- Improve error message in of_phandle_iterator_next()
- kbuild: Disable duplicate unit-address warnings for disabled nodes"
* tag 'devicetree-for-5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (114 commits)
dt-bindings: net: mdio: Drop resets/reset-names child properties
dt-bindings: clock: samsung: convert S5Pv210 to dtschema
dt-bindings: clock: samsung: convert Exynos5410 to dtschema
dt-bindings: clock: samsung: convert Exynos5260 to dtschema
dt-bindings: clock: samsung: extend Exynos7 bindings with UFS
dt-bindings: clock: samsung: convert Exynos7 to dtschema
dt-bindings: clock: samsung: convert Exynos5433 to dtschema
dt-bindings: i2c: maxim,max96712: Add bindings for Maxim Integrated MAX96712
dt-bindings: iio: adi,ltc2983: Fix 64-bit property sizes
dt-bindings: power: maxim,max17040: Fix incorrect type for 'maxim,rcomp'
dt-bindings: interrupt-controller: arm,gic-v3: Fix 'interrupts' cell size in example
dt-bindings: iio/magnetometer: yamaha,yas530: Fix invalid 'interrupts' in example
dt-bindings: clock: imx5: Drop clock consumer node from example
dt-bindings: Drop required 'interrupt-parent'
dt-bindings: net: ti,dp83869: Drop value on boolean 'ti,max-output-impedance'
dt-bindings: net: wireless: mt76: Fix 8-bit property sizes
dt-bindings: PCI: snps,dw-pcie-ep: Drop conflicting 'max-functions' schema
dt-bindings: i2c: st,stm32-i2c: Make each example a separate entry
dt-bindings: net: stm32-dwmac: Make each example a separate entry
dt-bindings: net: Cleanup MDIO node schemas
...
Much as we've done with other blocks, let's introduce generic
compatibles so drivers can bind to those and still work with future
SoCs, as long as the hardware remains the same. Also go ahead and add
compatibles for the new t600x SoCs (we group those as t6000).
Note that no DTs instantiate devices with this binding yet.
Reviewed-by: Mark Kettenis <kettenis@openbsd.org>
Signed-off-by: Hector Martin <marcan@marcan.st>
Reviewed-by: Sven Peter <sven@svenpeter.dev>
Reviewed-by: Sven Peter <sven@svenpeter.dev>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
'interrupt-parent' is never required as it can be in a parent node or a
parent node itself can be an interrupt provider. Where exactly it lives is
outside the scope of a binding schema.
Signed-off-by: Rob Herring <robh@kernel.org>
Acked-by: Lee Jones <lee.jones@linaro.org>
Acked-by: Bartosz Golaszewski <brgl@bgdev.pl>
Link: https://lore.kernel.org/r/20220107031905.2406176-1-robh@kernel.org
