IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
Remove all the mdb entries from the HW when mc is being disabled and
re-write them when it is being enabled.
Signed-off-by: Nogah Frankel <nogahf@mellanox.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Don't write multicast related data to the HW when mc is disabled.
Also, don't allocate mid id to new mids (so the remove function could know
that they weren't wrote to the HW)
Signed-off-by: Nogah Frankel <nogahf@mellanox.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Break mid deletion into two function, so it will be possible in the future
to delete a mid entry for other reasons then switchdev command (like port
deletion).
Signed-off-by: Nogah Frankel <nogahf@mellanox.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Attach mid getting and releasing mid id to the HW write / remove, and add
a flag to indicate whether the mid is in the HW. It is done because mid id
is also HW index to this mid.
This change allows adding in the following patches the ability to have a
mid in the mdb cache but not in the HW. It will be useful for being able
to disable the multicast.
It means that the mdb is being written / delete to the HW in the mid
allocation / removing function, not after them.
Signed-off-by: Nogah Frankel <nogahf@mellanox.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Break the smid write function into two, one that cleans the ports that
might be still written there and one that changes an exiting mid entry.
Signed-off-by: Nogah Frankel <nogahf@mellanox.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Instead of saving all the mids in the same list, save them per vlan
device. This change allows a more efficient mid find.
Also, in the next patches, there will be added a lot of loops over all the
mids in bridge device for multicast disable, mrouter change and ndb flush.
Signed-off-by: Nogah Frankel <nogahf@mellanox.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Since there is a bitmap for the ports registered to each mid, there is no
need for a ref count, since it will always be the number of set bits in
this bitmap. Any check of the ref count was replaced with checking if the
bitmap is empty.
Signed-off-by: Nogah Frankel <nogahf@mellanox.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add a bitmap of ports to the mid struct to hold the ports that are
registered to this mid.
Signed-off-by: Nogah Frankel <nogahf@mellanox.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Change the naming of mc_router to mrouter to keep consistency.
Signed-off-by: Nogah Frankel <nogahf@mellanox.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
As long as signing is supported (ie not a guest user connection) and
connection is SMB3 or SMB3.02, then validate negotiate (protect
against man in the middle downgrade attacks). We had been doing this
only when signing was required, not when signing was just enabled,
but this more closely matches recommended SMB3 behavior and is
better security. Suggested by Metze.
Signed-off-by: Steve French <smfrench@gmail.com>
Reviewed-by: Jeremy Allison <jra@samba.org>
Acked-by: Stefan Metzmacher <metze@samba.org>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
CC: Stable <stable@vger.kernel.org>
There is a race that cause cifs reconnect in cifs_mount,
- cifs_mount
- cifs_get_tcp_session
- [ start thread cifs_demultiplex_thread
- cifs_read_from_socket: -ECONNABORTED
- DELAY_WORK smb2_reconnect_server ]
- cifs_setup_session
- [ smb2_reconnect_server ]
auth_key.response was allocated in cifs_setup_session, and
will release when the session destoried. So when session re-
connect, auth_key.response should be check and released.
Tested with my system:
CIFS VFS: Free previous auth_key.response = ffff8800320bbf80
A simple auth_key.response allocation call trace:
- cifs_setup_session
- SMB2_sess_setup
- SMB2_sess_auth_rawntlmssp_authenticate
- build_ntlmssp_auth_blob
- setup_ntlmv2_rsp
Signed-off-by: Shu Wang <shuwang@redhat.com>
Signed-off-by: Steve French <smfrench@gmail.com>
CC: Stable <stable@vger.kernel.org>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
memory leak was found by kmemleak. exit_cifs_spnego
should be called before cifs module removed, or
cifs root_cred will not be released.
kmemleak report:
unreferenced object 0xffff880070a3ce40 (size 192):
backtrace:
kmemleak_alloc+0x4a/0xa0
kmem_cache_alloc+0xc7/0x1d0
prepare_kernel_cred+0x20/0x120
init_cifs_spnego+0x2d/0x170 [cifs]
0xffffffffc07801f3
do_one_initcall+0x51/0x1b0
do_init_module+0x60/0x1fd
load_module+0x161e/0x1b60
SYSC_finit_module+0xa9/0x100
SyS_finit_module+0xe/0x10
Signed-off-by: Shu Wang <shuwang@redhat.com>
Signed-off-by: Steve French <smfrench@gmail.com>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
CC: Stable <stable@vger.kernel.org>
Don't populate the read-only arrays types[] on the stack, instead make
them both static const. Makes the object code smaller by over 200 bytes:
Before:
text data bss dec hex filename
111503 37696 448 149647 2488f fs/cifs/file.o
After:
text data bss dec hex filename
111140 37856 448 149444 247c4 fs/cifs/file.o
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Steve French <smfrench@gmail.com>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
Yunsheng Lin says:
====================
TM related bugfixes for the HNS3 Ethernet Driver
This patch set contains a few bugfixes related to hclge_tm module.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Current mapping between pri and tc is one to one,
so user can't map multi priorities to the same tc.
This patch changes the mapping to many to one.
Fixes: 848440544b41f ("net: hns3: Add support of TX Scheduler & Shaper to HNS3 driver")
Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
rss_size is 1, 2, 4, 8, 16, 32, 64, 128, but acutal tc queue
size can be any u16 less than 128. If tc queue size is 5, we
set the rss_size to 8, indirection table will be used to limit
the size of actual queue size.
It may cause dropping of receiving packet in hardware if
rss_size is not set correctly.
For now, each TC has the same rss size.
Fixes: 46a3df9f9718 ("net: hns3: Add HNS3 Acceleration Engine & Compatibility Layer Support")
Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch fixes a typo error for feild, which should be field.
Fixes: 848440544b41f ("net: hns3: Add support of TX Scheduler & Shaper to HNS3 driver")
Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When hdev doesn't support DCB, rx private buffer is not allocated,
otherwise there is not enough buffer for rx shared buffer, causing
buffer allocation process to fail.
This patch fixes by checking the dcb capability in
hclge_rx_buffer_calc.
Fixes: 46a3df9f9718 ("net: hns3: Add HNS3 Acceleration Engine & Compatibility Layer Support")
Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
rx_priv_buf_alloc is used to tell hardware how much buffer is
used for rx direction, right now only the private buffer is
assigned.
For ae_dev that doesn't support DCB, private rx buffer is assigned
to zero, only shared rx buffer is used. So not setting the shared
rx buffer cause dropping of packet in SSU.
Fixes: 46a3df9f9718 ("net: hns3: Add HNS3 Acceleration Engine & Compatibility Layer Support")
Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When rx private buffer is disabled, there may be some case that
the rx private buffer is not set to zero, which may cause buffer
allocation process to fail.
This patch fixes this problem by setting priv->enable to 0 and
priv->buf_size to zero when rx private buffer is disabled.
Fixes: 46a3df9f9718 ("net: hns3: Add HNS3 Acceleration Engine & Compatibility Layer Support")
Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When ae_dev doesn't support DCB, DEFAULT_DV must be set to
a lower value, otherwise the buffer allocation process will
fail.
This patch fix it by setting it to 30K bytes.
Fixes: 46a3df9f9718 ("net: hns3: Add HNS3 Acceleration Engine & Compatibility Layer Support")
Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When ae_dev doesn't support DCB, rx_priv_wl_config,
common_thrd_config and tm_qs_bp_cfg can't be called, otherwise
cmd return fail, which causes the hclge module initialization
process to fail.
This patch fix it by adding a DCB capability flag to check if
the ae_dev support DCB.
Fixes: 46a3df9f9718 ("net: hns3: Add HNS3 Acceleration Engine & Compatibility Layer Support")
Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch add the ROCE supported flag in the driver_data
field of pci_device_id, delete roce_pci_tbl and change
HNAE_DEV_SUPPORT_ROCE_B to HNAE3_DEV_SUPPORT_ROCE_B.
This cleanup is done in order to support adding capability
in pci_device_id and to fix initialization failure when
cmd is not supported.
Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pablo Neira Ayuso says:
====================
Netfilter fixes for net
The following patchset contains two Netfilter fixes for your net tree,
they are:
1) Fix NAt compilation with UP, from Geert Uytterhoeven.
2) Fix incorrect number of entries when dumping a set, from
Vishwanath Pai.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Add 0x50a5, 0x50a6, 0x50a7, 0x50a8 and 0x50a9 T5 device
id's.
Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In isdn_ppp_write(), the header (i.e., protobuf) of the buffer is
fetched twice from userspace. The first fetch is used to peek at the
protocol of the message and reset the huptimer if necessary; while the
second fetch copies in the whole buffer. However, given that buf resides
in userspace memory, a user process can race to change its memory content
across fetches. By doing so, we can either avoid resetting the huptimer
for any type of packets (by first setting proto to PPP_LCP and later
change to the actual type) or force resetting the huptimer for LCP
packets.
This patch changes this double-fetch behavior into two single fetches
decided by condition (lp->isdn_device < 0 || lp->isdn_channel <0).
A more detailed discussion can be found at
https://marc.info/?l=linux-kernel&m=150586376926123&w=2
Signed-off-by: Meng Xu <mengxu.gatech@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Florian Fainelli says:
====================
blackfin: Drop non-functional DSA code
I sent those many months ago in the hope that the bfin-linux people
would pick those patches but nobody seems to be responding, can you
queue those via net-next since this affects DSA?
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
There is no in tree driver for the KSZ8893M switch driver, so just get rid of
the code in that board file.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Nothing in that file uses definitions from that header, so just get rid of it.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Instead of open coding the check.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
fec_ptp_check_pps_event will return 1 if FEC_T_TF_MASK caused
an interrupt. Don't return IRQ_NONE in this case.
Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com>
Acked-by: Fugang Duan <fugang.duan@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
FEC_ENET_TS_TIMER is not checked in the interrupt routine
so there is no need to enable it.
Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com>
Acked-by: Fugang Duan <fugang.duan@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Before queue 0 was always checked if any queue caused an interrupt.
It is better to just mark queue 0 if queue 0 has caused an interrupt.
Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com>
Acked-by: Fugang Duan <Fugang.duan@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Since XDP's view of the packet includes the MAC header, moving the start-
of-packet with bpf_xdp_adjust_head needs to also update the offset of the
MAC header (which is relative to skb->head, not to the skb->data that was
changed).
Without this, tcpdump sees packets starting from the old MAC header rather
than the new one, at least in my tests on the loopback device.
Fixes: b5cdae3291f7 ("net: Generic XDP")
Signed-off-by: Edward Cree <ecree@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This reverts commit 00ba4cb36da682c68dc87d1703a8aaffe2b4e9c5.
Discussion with David Ahern determined that this change is
actually not needed.
Signed-off-by: David S. Miller <davem@davemloft.net>
The actual length of cmsg fetched in during the second loop
(i.e., kcmsg - kcmsg_base) could be different from what we
get from the first loop (i.e., kcmlen).
The main reason is that the two get_user() calls in the two
loops (i.e., get_user(ucmlen, &ucmsg->cmsg_len) and
__get_user(ucmlen, &ucmsg->cmsg_len)) could cause ucmlen
to have different values even they fetch from the same userspace
address, as user can race to change the memory content in
&ucmsg->cmsg_len across fetches.
Although in the second loop, the sanity check
if ((char *)kcmsg_base + kcmlen - (char *)kcmsg < CMSG_ALIGN(tmp))
is inplace, it only ensures that the cmsg fetched in during the
second loop does not exceed the length of kcmlen, but not
necessarily equal to kcmlen. But indicated by the assignment
kmsg->msg_controllen = kcmlen, we should enforce that.
This patch adds this additional sanity check and ensures that
what is recorded in kmsg->msg_controllen is the actual cmsg length.
Signed-off-by: Meng Xu <mengxu.gatech@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
- fix suspend/resume issues.
- fix memory corruption detected by kasan.
- fix build error on x86.
* tag 'exynos-drm-fixes-for-v4.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos:
drm/exynos/hdmi: Fix unsafe list iteration
drm: exynos: include linux/irq.h
drm/exynos: Fix suspend/resume support
drm/exynos: Fix locking in the suspend/resume paths
drm/i915 fixes for 4.14-rc1
Couple fixes for stable:
- Fix MIPI panels on BXT.
- Fix PCI BARs information on GVT.
Plus other fixes:
- Fix minimal brightness for BXT, GLK, CFL and CNL.
- Fix compilation warning: unused in_vbl
- Fix error handling in intel_framebuffer_init
* tag 'drm-intel-fixes-2017-09-20' of git://anongit.freedesktop.org/git/drm-intel:
drm/i915: Remove unused 'in_vbl' from i915_get_crtc_scanoutpos()
drm/i915/cnp: set min brightness from VBT
Revert "drm/i915/bxt: Disable device ready before shutdown command"
drm/i915/bxt: set min brightness from VBT
drm/i915: Fix an error handling in 'intel_framebuffer_init()'
drm/i915/gvt: Fix incorrect PCI BARs reporting
We were not displaying some key fields (session status and capabilities and
whether guest authenticated) for SMB2/SMB3 session in /proc/fs/cifs/DebugData.
This is needed for real world triage of problems with the (now much more
common) SMB3 mounts.
Signed-off-by: Steve French <smfrench@gmail.com>
The commit 6b229cf77d68 ("udp: add batching to udp_rmem_release()")
reduced greatly the cacheline contention between the BH and the US
reader batching the rmem updates in most scenarios.
Such optimization is explicitly avoided if the US reader is faster
then BH processing.
My fault, I initially suggested this kind of behavior due to concerns
of possible regressions with small sk_rcvbuf values. Tests showed
such concerns are misplaced, so this commit relaxes the condition
for rmem bulk updates, obtaining small but measurable performance
gain in the scenario described above.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch tries to add XDP_REDIRECT for virtio-net. The changes are
not complex as we could use exist XDP_TX helpers for most of the
work. The rest is passing the XDP_TX to NAPI handler for implementing
batching.
Cc: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
There's no need to add packet len average in the case of XDP_PASS
since it will be done soon after skb is created.
Cc: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Make the driver react to device tree "fixed-link" declaration on CPU port.
- turn off autonegotiation
- force speed 10 or 100 mb/s
- force duplex mode
Signed-off-by: Egil Hjelmeland <privat@egil-hjelmeland.no>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch fixes a bug exhibited by the following scenario:
1. fd1 = perf_event_open with attr.config = ID1
2. attach bpf program prog1 to fd1
3. fd2 = perf_event_open with attr.config = ID1
<this will be successful>
4. user program closes fd2 and prog1 is detached from the tracepoint.
5. user program with fd1 does not work properly as tracepoint
no output any more.
The issue happens at step 4. Multiple perf_event_open can be called
successfully, but only one bpf prog pointer in the tp_event. In the
current logic, any fd release for the same tp_event will free
the tp_event->prog.
The fix is to free tp_event->prog only when the closing fd
corresponds to the one which registered the program.
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently, when an interface is released from a bridge via
ioctl(), we get a RTM_DELLINK event through netlink:
Deleted 2: dummy0: <BROADCAST,NOARP,UP,LOWER_UP> mtu 1500 master bridge0 state UNKNOWN
link/ether 6e:23:c2:54:3a:b3
Userspace has to interpret that as a removal from the bridge, not as a
complete removal of the interface. When an bridged interface is
completely removed, we get two events:
Deleted 2: dummy0: <BROADCAST,NOARP> mtu 1500 master bridge0 state DOWN
link/ether 6e:23:c2:54:3a:b3
Deleted 2: dummy0: <BROADCAST,NOARP> mtu 1500 qdisc noop state DOWN group default
link/ether 6e:23:c2:54:3a:b3 brd ff:ff:ff:ff:ff:ff
In constrast, when an interface is released from a bond, we get a
RTM_NEWLINK with only the new characteristics (no master):
3: dummy1: <BROADCAST,NOARP,SLAVE,UP,LOWER_UP> mtu 1500 qdisc noqueue master bond0 state UNKNOWN group default
link/ether ae:dc:7a:8c:9a:3c brd ff:ff:ff:ff:ff:ff
3: dummy1: <BROADCAST,NOARP,UP,LOWER_UP> mtu 1500 qdisc noqueue state UNKNOWN group default
link/ether ae:dc:7a:8c:9a:3c brd ff:ff:ff:ff:ff:ff
4: bond0: <BROADCAST,MULTICAST,MASTER,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP group default
link/ether ae:dc:7a:8c:9a:3c brd ff:ff:ff:ff:ff:ff
3: dummy1: <BROADCAST,NOARP> mtu 1500 qdisc noqueue state DOWN group default
link/ether ae:dc:7a:8c:9a:3c brd ff:ff:ff:ff:ff:ff
3: dummy1: <BROADCAST,NOARP> mtu 1500 qdisc noqueue state DOWN group default
link/ether ca:c8:7b:66:f8:25 brd ff:ff:ff:ff:ff:ff
4: bond0: <BROADCAST,MULTICAST,MASTER,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP group default
link/ether ae:dc:7a:8c:9a:3c brd ff:ff:ff:ff:ff:ff
Userland may be confused by the fact we say a link is deleted while
its characteristics are only modified. A first solution would have
been to turn the RTM_DELLINK event in del_nbp() into a RTM_NEWLINK
event. However, maybe some piece of userland is relying on this
RTM_DELLINK to detect when a bridged interface is released. Instead,
we also emit a RTM_NEWLINK event once the interface is
released (without master info).
Deleted 2: dummy0: <BROADCAST,NOARP,UP,LOWER_UP> mtu 1500 master bridge0 state UNKNOWN
link/ether 8a:bb:e7:94:b1:f8
2: dummy0: <BROADCAST,NOARP,UP,LOWER_UP> mtu 1500 qdisc noqueue state UNKNOWN group default
link/ether 8a:bb:e7:94:b1:f8 brd ff:ff:ff:ff:ff:ff
This is done only when using ioctl(). When using Netlink, such an
event is already automatically emitted in do_setlink().
Signed-off-by: Vincent Bernat <vincent@bernat.im>
Signed-off-by: David S. Miller <davem@davemloft.net>
Packet socket bind operations must hold the po->bind_lock. This keeps
po->running consistent with whether the socket is actually on a ptype
list to receive packets.
fanout_add unbinds a socket and its packet_rcv/tpacket_rcv call, then
binds the fanout object to receive through packet_rcv_fanout.
Make it hold the po->bind_lock when testing po->running and rebinding.
Else, it can race with other rebind operations, such as that in
packet_set_ring from packet_rcv to tpacket_rcv. Concurrent updates
can result in a socket being added to a fanout group twice, causing
use-after-free KASAN bug reports, among others.
Reported independently by both trinity and syzkaller.
Verified that the syzkaller reproducer passes after this patch.
Fixes: dc99f600698d ("packet: Add fanout support.")
Reported-by: nixioaming <nixiaoming@huawei.com>
Signed-off-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch checks data first at one place, return if it's null.
Signed-off-by: Zhang Shengju <zhangshengju@cmss.chinamobile.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In ipv6_skip_exthdr, the lengh of AH header is computed manually
as (hp->hdrlen+2)<<2. However, in include/linux/ipv6.h, a macro
named ipv6_authlen is already defined for exactly the same job. This
commit replaces the manual computation code with the macro.
Signed-off-by: Xiang Gao <qasdfgtyuiop@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
pci_epf_test_raise_irq() reads the interrupt to use for the response from
reg->command, but this has been cleared at the beginning of the command
handler so the value is always zero at this point.
Instead, extract the interrupt index before handling the command and then
pass the requested interrupt into pci_epf_test_raise_irq(). This allows us
to remove the specific code to extract the interrupt for
COMMAND_RAISE_MSI_IRQ since it is now handled in common code.
Fixes: 3ecf3232c54c ("PCI: endpoint: Do not reset *command* inadvertently")
Signed-off-by: John Keeping <john@metanate.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Kishon Vijay Abraham I <kishon@ti.com>
