IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
The I2C IP doesn't support writes or reads of 0 bytes.
In order for a START/STOP transaction to take
place on the bus, the data written/read has to be
at least one byte.
That is, you cannot generate a write with 0 bytes,
just to get the ACK from a device, just so you can
probe that device if it is on the bus and so to
discover all devices on the bus--you'll have to
read at least one byte. Writes of 0 bytes generate
no START/STOP on this I2C IP--the bus is not
engaged at all.
Set the I2C_AQ_NO_ZERO_LEN to the existing I2C
quirk tables for Aldebaran, Arcturus, Navi10 and
Sienna Cichlid, and add a quirk table to the I2C
driver which drives the bus when the SMU
doesn't--for instance on Vega20.
Cc: Alexander Deucher <Alexander.Deucher@amd.com>
Cc: Andrey Grodzovsky <Andrey.Grodzovsky@amd.com>
Cc: Lijo Lazar <Lijo.Lazar@amd.com>
Cc: John Clements <john.clements@amd.com>
Cc: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Luben Tuikov <luben.tuikov@amd.com>
Reviewed-by: Lijo Lazar <Lijo.Lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
GPU timing counters are read via KIQ under sriov, which will introduce
a delay.
[How]
It could be directly read by MMIO.
v2: Add additional check to prevent carryover issue.
v3: Only check for carryover for once to prevent performance issue.
v4: Add comments of the rough frequency where carryover happens.
v5: Remove mutex and gfxoff ctrl unused with current timing registers.
Signed-off-by: YuBiao Wang <YuBiao.Wang@amd.com>
Acked-by: Horace Chen <horace.chen@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.co>
Reviewed-by: Monk Liu <monk.liu@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Luben Tuikov <luben.tuikov@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
It is based on reverting two patches back.
drm/amdkfd: Make TLB flush conditional on mapping
drm/amdgpu: Add table_freed parameter to amdgpu_vm_bo_update
Signed-off-by: Eric Huang <jinhuieric.huang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use new helper function amdgpu_vm_set_pasid() to
assign vm pasid value. This also ensures that we don't free
a pasid from vm code as pasids are allocated somewhere else.
Signed-off-by: Nirmoy Das <nirmoy.das@amd.com>
Acked-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Replace idr with xarray as we actually need hash functionality.
Cleanup code related to vm pasid by adding helper function.
Signed-off-by: Nirmoy Das <nirmoy.das@amd.com>
Acked-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
- Added option for per CPU threads to the hwlat tracer
- Have hwlat tracer handle hotplug CPUs
- New tracer: osnoise, that detects latency caused by interrupts, softirqs
and scheduling of other tasks.
- Added timerlat tracer that creates a thread and measures in detail what
sources of latency it has for wake ups.
- Removed the "success" field of the sched_wakeup trace event.
This has been hardcoded as "1" since 2015, no tooling should be looking
at it now. If one exists, we can revert this commit, fix that tool and
try to remove it again in the future.
- tgid mapping fixed to handle more than PID_MAX_DEFAULT pids/tgids.
- New boot command line option "tp_printk_stop", as tp_printk causes trace
events to write to console. When user space starts, this can easily live
lock the system. Having a boot option to stop just after boot up is
useful to prevent that from happening.
- Have ftrace_dump_on_oops boot command line option take numbers that match
the numbers shown in /proc/sys/kernel/ftrace_dump_on_oops.
- Bootconfig clean ups, fixes and enhancements.
- New ktest script that tests bootconfig options.
- Add tracepoint_probe_register_may_exist() to register a tracepoint
without triggering a WARN*() if it already exists. BPF has a path from
user space that can do this. All other paths are considered a bug.
- Small clean ups and fixes
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCYN8YPhQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qhxLAP9Mo5hHv7Hg6W7Ddv77rThm+qclsMR/
yW0P+eJpMm4+xAD8Cq03oE1DimPK+9WZBKU5rSqAkqG6CjgDRw6NlIszzQQ=
=WEPR
-----END PGP SIGNATURE-----
Merge tag 'trace-v5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing updates from Steven Rostedt:
- Added option for per CPU threads to the hwlat tracer
- Have hwlat tracer handle hotplug CPUs
- New tracer: osnoise, that detects latency caused by interrupts,
softirqs and scheduling of other tasks.
- Added timerlat tracer that creates a thread and measures in detail
what sources of latency it has for wake ups.
- Removed the "success" field of the sched_wakeup trace event. This has
been hardcoded as "1" since 2015, no tooling should be looking at it
now. If one exists, we can revert this commit, fix that tool and try
to remove it again in the future.
- tgid mapping fixed to handle more than PID_MAX_DEFAULT pids/tgids.
- New boot command line option "tp_printk_stop", as tp_printk causes
trace events to write to console. When user space starts, this can
easily live lock the system. Having a boot option to stop just after
boot up is useful to prevent that from happening.
- Have ftrace_dump_on_oops boot command line option take numbers that
match the numbers shown in /proc/sys/kernel/ftrace_dump_on_oops.
- Bootconfig clean ups, fixes and enhancements.
- New ktest script that tests bootconfig options.
- Add tracepoint_probe_register_may_exist() to register a tracepoint
without triggering a WARN*() if it already exists. BPF has a path
from user space that can do this. All other paths are considered a
bug.
- Small clean ups and fixes
* tag 'trace-v5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: (49 commits)
tracing: Resize tgid_map to pid_max, not PID_MAX_DEFAULT
tracing: Simplify & fix saved_tgids logic
treewide: Add missing semicolons to __assign_str uses
tracing: Change variable type as bool for clean-up
trace/timerlat: Fix indentation on timerlat_main()
trace/osnoise: Make 'noise' variable s64 in run_osnoise()
tracepoint: Add tracepoint_probe_register_may_exist() for BPF tracing
tracing: Fix spelling in osnoise tracer "interferences" -> "interference"
Documentation: Fix a typo on trace/osnoise-tracer
trace/osnoise: Fix return value on osnoise_init_hotplug_support
trace/osnoise: Make interval u64 on osnoise_main
trace/osnoise: Fix 'no previous prototype' warnings
tracing: Have osnoise_main() add a quiescent state for task rcu
seq_buf: Make trace_seq_putmem_hex() support data longer than 8
seq_buf: Fix overflow in seq_buf_putmem_hex()
trace/osnoise: Support hotplug operations
trace/hwlat: Support hotplug operations
trace/hwlat: Protect kdata->kthread with get/put_online_cpus
trace: Add timerlat tracer
trace: Add osnoise tracer
...
In case when psp_init_asd_microcode() fails to load ASD microcode file,
psp_v12_0_init_microcode() tries to print the firmware filename that
failed to load before bailing out.
This is wrong because:
- the firmware filename it would want it print is an incorrect one as
psp_init_asd_microcode() and psp_v12_0_init_microcode() are loading
different filenames
- it tries to print fw_name, but that's not yet been initialized by that
time, so it prints random stack contents, e.g.
amdgpu 0000:04:00.0: Direct firmware load for amdgpu/renoir_asd.bin failed with error -2
amdgpu 0000:04:00.0: amdgpu: fail to initialize asd microcode
amdgpu 0000:04:00.0: amdgpu: psp v12.0: Failed to load firmware "\xfeTO\x8e\xff\xff"
Fix that by bailing out immediately, instead of priting the bogus error
message.
Reported-by: Vojtech Pavlik <vojtech@ucw.cz>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This reverts commit 4192f7b5768912ceda82be2f83c87ea7181f9980.
It is not true (as stated in the reverted commit changelog) that we never
unmap the BAR on failure; it actually does happen properly on
amdgpu_driver_load_kms() -> amdgpu_driver_unload_kms() ->
amdgpu_device_fini() error path.
What's worse, this commit actually completely breaks resource freeing on
probe failure (like e.g. failure to load microcode), as
amdgpu_driver_unload_kms() notices adev->rmmio being NULL and bails too
early, leaving all the resources that'd normally be freed in
amdgpu_acpi_fini() and amdgpu_device_fini() still hanging around, leading
to all sorts of oopses when someone tries to, for example, access the
sysfs and procfs resources which are still around while the driver is
gone.
Fixes: 4192f7b57689 ("drm/amdgpu: unmap register bar on device init failure")
Reported-by: Vojtech Pavlik <vojtech@ucw.cz>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Print the name of the DRM driver when taking over fbdev devices. Makes
the output to dmesg more consistent. Note that the driver name is only
used for printing a string to the kernel log. No UAPI is affected by this
change.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Nirmoy Das <nirmoy.das@amd.com>
Acked-by: Chen-Yu Tsai <wens@csie.org> # sun4i
Acked-by: Neil Armstrong <narmstrong@baylibre.com> # meson
Link: https://patchwork.freedesktop.org/patch/msgid/20210629135833.22679-1-tzimmermann@suse.de
Mali Midgard/Bifrost GPUs have 3 hardware queues but only a global GPU
reset. This leads to extra complexity when we need to synchronize timeout
works with the reset work. One solution to address that is to have an
ordered workqueue at the driver level that will be used by the different
schedulers to queue their timeout work. Thanks to the serialization
provided by the ordered workqueue we are guaranteed that timeout
handlers are executed sequentially, and can thus easily reset the GPU
from the timeout handler without extra synchronization.
v5:
* Add a new paragraph to the timedout_job() method
v3:
* New patch
v4:
* Actually use the timeout_wq to queue the timeout work
Suggested-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Christian König <christian.koenig@amd.com>
Cc: Qiang Yu <yuq825@gmail.com>
Cc: Emma Anholt <emma@anholt.net>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210630062751.2832545-3-boris.brezillon@collabora.com
Use amdgpu_ucode_name to show ucode name and psp_gfx_cmd_name to
show psp_gfx_cmd name in psp_cmd_submit_buf.
v2: adjust function name
Signed-off-by: Lang Yu <Lang.Yu@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Implement function psp_gfx_cmd_name to show cmd name
via cmd id.
v2: rename it to psp_gfx_cmd_name
Signed-off-by: Lang Yu <Lang.Yu@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Implement function amdgpu_ucode_name to show ucode name
via ucode id.
v2: rename it to amdgpu_ucode_name
Signed-off-by: Lang Yu <Lang.Yu@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
On long transfers to the EEPROM device,
i.e. write, it is observed that the driver aborts
the transfer.
The reason for this is that the driver isn't
patient enough--the IC_STATUS register's contents
is 0x27, which is MST_ACTIVITY | TFE | TFNF |
ACTIVITY. That is, while the transmission FIFO is
empty, we, the I2C master device, are still
driving the bus.
Implement the correct procedure to disable
the block, as described in the DesignWare I2C
Databook, section 3.8.3 Disabling DW_apb_i2c on
page 56. Now there are no premature aborts on long
data transfers.
Cc: Alexander Deucher <Alexander.Deucher@amd.com>
Cc: Andrey Grodzovsky <Andrey.Grodzovsky@amd.com>
Signed-off-by: Luben Tuikov <luben.tuikov@amd.com>
Acked-by: Alexander Deucher <Alexander.Deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
In smu_v11_0_i2c_transmit() use a single loop to
transmit bytes, instead of two nested loops.
Cc: Alexander Deucher <Alexander.Deucher@amd.com>
Cc: Andrey Grodzovsky <Andrey.Grodzovsky@amd.com>
Signed-off-by: Luben Tuikov <luben.tuikov@amd.com>
Reviewed-by: Alexander Deucher <Alexander.Deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Debugfs RAS EEPROM files are available when
the ASIC supports RAS, and when the debugfs is
enabled, an also when "ras_enable" module
parameter is set to 0. However in this case,
we get a kernel oops when accessing some of
the "ras_..." controls in debugfs. The reason
for this is that struct amdgpu_ras::adev is
unset. This commit sets it, thus enabling access
to those facilities. Note that this facilitates
EEPROM access and not necessarily RAS features or
functionality.
Cc: Alexander Deucher <Alexander.Deucher@amd.com>
Cc: John Clements <john.clements@amd.com>
Cc: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Luben Tuikov <luben.tuikov@amd.com>
Acked-by: Alexander Deucher <Alexander.Deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
pos is 64 bits.
Fixes: c65b0805e77919 ("drm/amdgpu: RAS EEPROM table is now in debugfs")
Cc: luben.tuikov@amd.com
Reported-by: kernel test robot <lkp@intel.com>
Reviewed-by: Luben Tuikov <luben.tuikov@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Split functionality between read and write, which
simplifies the code and exposes areas of
optimization and more or less complexity, and take
advantage of that.
Read and write the table in one go; use a separate
stage to decode or encode the data, as opposed to
on the fly, which keeps the I2C bus busy. Use a
single read/write to read/write the table or at
most two if the number of records we're
reading/writing wraps around.
Check the check-sum of a table in EEPROM on init.
Update the checksum at the same time as when
updating the table header signature, when the
threshold was increased on boot.
Take advantage of arithmetic modulo 256, that is,
use a byte!, to greatly simplify checksum
arithmetic.
Cc: Alexander Deucher <Alexander.Deucher@amd.com>
Cc: Andrey Grodzovsky <Andrey.Grodzovsky@amd.com>
Signed-off-by: Luben Tuikov <luben.tuikov@amd.com>
Acked-by: Alexander Deucher <Alexander.Deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The code is now tested from userspace.
Remove already macroed out test function.
Cc: Alexander Deucher <Alexander.Deucher@amd.com>
Cc: Andrey Grodzovsky <Andrey.Grodzovsky@amd.com>
Signed-off-by: Luben Tuikov <luben.tuikov@amd.com>
Reviewed-by: Alexander Deucher <Alexander.Deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Qualify with "ras_". Use kernel's own--don't
redefine your own.
Cc: Alexander Deucher <Alexander.Deucher@amd.com>
Cc: Andrey Grodzovsky <Andrey.Grodzovsky@amd.com>
Signed-off-by: Luben Tuikov <luben.tuikov@amd.com>
Reviewed-by: Alexander Deucher <Alexander.Deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
buff --> buf. Essentially buffer abbreviates to
buf, remove 1/2 of it, or just the iron part, as
opposed to just the Er,
Cc: Alexander Deucher <Alexander.Deucher@amd.com>
Cc: Andrey Grodzovsky <Andrey.Grodzovsky@amd.com>
Signed-off-by: Luben Tuikov <luben.tuikov@amd.com>
Reviewed-by: Alexander Deucher <Alexander.Deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
RAS_MAX_RECORD_NUM may mean the maximum record
number, as in the maximum house number on your
street, or it may mean the maximum number of
records, as in the count of records, which is also
a number. To make this distinction whether the
number is ordinal (index) or cardinal (count),
rename this macro to RAS_MAX_RECORD_COUNT.
This makes it easy to understand what it refers
to, especially when we compute quantities such as,
how many records do we have left in the table,
especially when there are so many other numbers,
quantities and numerical macros around.
Also rename the long,
amdgpu_ras_eeprom_get_record_max_length() to the
more succinct and clear,
amdgpu_ras_eeprom_max_record_count().
When computing the threshold, which also deals
with counts, i.e. "how many", use cardinal
"max_eeprom_records_count", than the quantitative
"max_eeprom_records_len".
Simplify the logic here and there, as well.
Cc: Guchun Chen <guchun.chen@amd.com>
Cc: John Clements <john.clements@amd.com>
Cc: Hawking Zhang <Hawking.Zhang@amd.com>
Cc: Alexander Deucher <Alexander.Deucher@amd.com>
Signed-off-by: Luben Tuikov <luben.tuikov@amd.com>
Acked-by: Alexander Deucher <Alexander.Deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Rename update_table_header() to
write_table_header() as this function is actually
writing it to EEPROM.
Use kernel types; use u8 to carry around the
checksum, in order to take advantage of arithmetic
modulo 8-bits (256).
Tidy up to 80 columns.
When updating the checksum, just recalculate the
whole thing.
Cc: Alexander Deucher <Alexander.Deucher@amd.com>
Cc: Andrey Grodzovsky <Andrey.Grodzovsky@amd.com>
Signed-off-by: Luben Tuikov <luben.tuikov@amd.com>
Acked-by: Alexander Deucher <Alexander.Deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
No need to account for the 2 bytes of EEPROM
address--this is now well abstracted away by
the fixes the the lower layers.
Cc: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Cc: Alexander Deucher <Alexander.Deucher@amd.com>
Signed-off-by: Luben Tuikov <luben.tuikov@amd.com>
Acked-by: Alexander Deucher <Alexander.Deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The low level EEPROM write method, doesn't return
1, but the number of bytes written. Thus do not
compare to 1, instead, compare to greater than 0
for success.
Other cleanup: if the lower layers returned
-errno, then return that, as opposed to
overwriting the error code with one-fits-all
-EINVAL. For instance, some return -EAGAIN.
Cc: Jean Delvare <jdelvare@suse.de>
Cc: Alexander Deucher <Alexander.Deucher@amd.com>
Cc: Andrey Grodzovsky <Andrey.Grodzovsky@amd.com>
Cc: Lijo Lazar <Lijo.Lazar@amd.com>
Cc: Stanley Yang <Stanley.Yang@amd.com>
Cc: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Luben Tuikov <luben.tuikov@amd.com>
Reviewed-by: Alexander Deucher <Alexander.Deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The I2C address is kept as a 16-bit quantity in
the kernel. The I2C_TAR::I2C_TAR field is 10-bit
wide.
Fix the width of the I2C address for Vega20 from 8
bits to 16 bits to accommodate the full spectrum
of I2C address space.
Cc: Jean Delvare <jdelvare@suse.de>
Cc: Alexander Deucher <Alexander.Deucher@amd.com>
Cc: Andrey Grodzovsky <Andrey.Grodzovsky@amd.com>
Cc: Lijo Lazar <Lijo.Lazar@amd.com>
Cc: Stanley Yang <Stanley.Yang@amd.com>
Cc: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Luben Tuikov <luben.tuikov@amd.com>
Acked-by: Alexander Deucher <Alexander.Deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Wrap amdgpu_ras_eeprom_xfer(..., bool write),
into amdgpu_ras_eeprom_read() and
amdgpu_ras_eeprom_write(), as that makes reading
and understanding the code clearer.
Cc: Jean Delvare <jdelvare@suse.de>
Cc: Alexander Deucher <Alexander.Deucher@amd.com>
Cc: Andrey Grodzovsky <Andrey.Grodzovsky@amd.com>
Cc: Lijo Lazar <Lijo.Lazar@amd.com>
Cc: Stanley Yang <Stanley.Yang@amd.com>
Cc: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Luben Tuikov <luben.tuikov@amd.com>
Acked-by: Alexander Deucher <Alexander.Deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Instead of fixing the spelling in
amdgpu_ras_eeprom_process_recods(),
rename it to,
amdgpu_ras_eeprom_xfer(),
to look similar to other I2C and protocol
transfer (read/write) functions.
Also to keep the column span to within reason by
using a shorter name.
Change the "num" function parameter from "int" to
"const u32" since it is the number of items
(records) to xfer, i.e. their count, which cannot
be a negative number.
Also swap the order of parameters, keeping the
pointer to records and their number next to each
other, while the direction now becomes the last
parameter.
Cc: Jean Delvare <jdelvare@suse.de>
Cc: Alexander Deucher <Alexander.Deucher@amd.com>
Cc: Andrey Grodzovsky <Andrey.Grodzovsky@amd.com>
Cc: Lijo Lazar <Lijo.Lazar@amd.com>
Cc: Stanley Yang <Stanley.Yang@amd.com>
Cc: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Luben Tuikov <luben.tuikov@amd.com>
Acked-by: Alexander Deucher <Alexander.Deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
In amdgpu_ras_eeprom.c--the interface from RAS to
EEPROM, rename macros from EEPROM to RAS, to
indicate that the quantities and objects are RAS
specific, not EEPROM. We can decrease the RAS
table, or put it in different offset of EEPROM as
needed in the future.
Remove EEPROM_ADDRESS_SIZE macro definition, equal
to 2, from the file and calculations, as that
quantity is computed and added on the stack,
in the lower layer, amdgpu_eeprom_xfer().
Cc: Jean Delvare <jdelvare@suse.de>
Cc: Alexander Deucher <Alexander.Deucher@amd.com>
Cc: Andrey Grodzovsky <Andrey.Grodzovsky@amd.com>
Cc: Lijo Lazar <Lijo.Lazar@amd.com>
Cc: Stanley Yang <Stanley.Yang@amd.com>
Cc: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Luben Tuikov <luben.tuikov@amd.com>
Acked-by: Alexander Deucher <Alexander.Deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Set the auto-discoverable class of I2C bus to
HWMON. Remove SPD.
Cc: Jean Delvare <jdelvare@suse.de>
Cc: Alexander Deucher <Alexander.Deucher@amd.com>
Cc: Andrey Grodzovsky <Andrey.Grodzovsky@amd.com>
Cc: Lijo Lazar <Lijo.Lazar@amd.com>
Cc: Stanley Yang <Stanley.Yang@amd.com>
Cc: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Luben Tuikov <luben.tuikov@amd.com>
Reviewed-by: Alexander Deucher <Alexander.Deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fix the size of the EEPROM from 256000 bytes
to 262144 bytes (256 KiB).
Fix a couple or wrap around bugs. If a valid
value/address is 0 <= addr < size, the inverse of
this inequality (barring negative values which
make no sense here) is addr >= size. Fix this in
the RAS code.
Cc: Jean Delvare <jdelvare@suse.de>
Cc: Alexander Deucher <Alexander.Deucher@amd.com>
Cc: Andrey Grodzovsky <Andrey.Grodzovsky@amd.com>
Cc: Lijo Lazar <Lijo.Lazar@amd.com>
Cc: Stanley Yang <Stanley.Yang@amd.com>
Cc: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Luben Tuikov <luben.tuikov@amd.com>
Acked-by: Alexander Deucher <Alexander.Deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Convert RAS and FRU code to use the 19-bit I2C
memory address and remove all "slave_addr", as
this is now absolved into the 19-bit address.
Cc: Jean Delvare <jdelvare@suse.de>
Cc: John Clements <john.clements@amd.com>
Cc: Alexander Deucher <Alexander.Deucher@amd.com>
Cc: Andrey Grodzovsky <Andrey.Grodzovsky@amd.com>
Cc: Lijo Lazar <Lijo.Lazar@amd.com>
Cc: Stanley Yang <Stanley.Yang@amd.com>
Cc: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Luben Tuikov <luben.tuikov@amd.com>
Acked-by: Alexander Deucher <Alexander.Deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
* "eeprom_addr" is now 32-bit wide.
* Remove "slave_addr" from the I2C EEPROM driver
interface. The I2C EEPROM Device Type Identifier
is fixed at 1010b, and the rest of the bits
of the Device Address Byte/Device Select Code,
are memory address bits, where the first three
of those bits are the hardware selection bits.
All this is now a 19-bit address and passed
as "eeprom_addr". This abstracts the I2C bus
for EEPROM devices for this I2C EEPROM driver.
Now clients only pass the 19-bit EEPROM memory
address, to the I2C EEPROM driver, as the 32-bit
"eeprom_addr", from which they want to read from
or write to.
Cc: Jean Delvare <jdelvare@suse.de>
Cc: Alexander Deucher <Alexander.Deucher@amd.com>
Cc: Andrey Grodzovsky <Andrey.Grodzovsky@amd.com>
Cc: Lijo Lazar <Lijo.Lazar@amd.com>
Cc: Stanley Yang <Stanley.Yang@amd.com>
Cc: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Luben Tuikov <luben.tuikov@amd.com>
Acked-by: Alexander Deucher <Alexander.Deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Consult the i2c_adapter.quirks table for
the maximum read/write data length per bus
transaction. Do not exceed this transaction
limit.
Cc: Jean Delvare <jdelvare@suse.de>
Cc: Alexander Deucher <Alexander.Deucher@amd.com>
Cc: Andrey Grodzovsky <Andrey.Grodzovsky@amd.com>
Cc: Lijo Lazar <Lijo.Lazar@amd.com>
Cc: Stanley Yang <Stanley.Yang@amd.com>
Cc: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Luben Tuikov <luben.tuikov@amd.com>
Acked-by: Alexander Deucher <Alexander.Deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
* When reading from the EEPROM device, there is no
device limitation on the number of bytes
read--they're simply sequenced out. Thus, read
the whole data requested in one go.
* When writing to the EEPROM device, there is a
256-byte page limit to write to before having to
generate a STOP on the bus, as well as the
address written to mustn't cross over the page
boundary (it actually rolls over). Maximize the
data written to per bus acquisition.
* Return the number of bytes read/written, or -errno.
* Add kernel doc.
Cc: Jean Delvare <jdelvare@suse.de>
Cc: Alexander Deucher <Alexander.Deucher@amd.com>
Cc: Andrey Grodzovsky <Andrey.Grodzovsky@amd.com>
Cc: Lijo Lazar <Lijo.Lazar@amd.com>
Cc: Stanley Yang <Stanley.Yang@amd.com>
Cc: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Luben Tuikov <luben.tuikov@amd.com>
Acked-by: Alexander Deucher <Alexander.Deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Teach Vega20 I2C to be agnostic. Allow addressing
different devices while the master holds the bus.
Set STOP as per the controller's specification.
v2: Qualify generating ReSTART before the 1st byte
of the message, when set by the caller, as
those functions are separated, as caught by
Andrey G.
Cc: Jean Delvare <jdelvare@suse.de>
Cc: Alexander Deucher <Alexander.Deucher@amd.com>
Cc: Andrey Grodzovsky <Andrey.Grodzovsky@amd.com>
Cc: Lijo Lazar <Lijo.Lazar@amd.com>
Cc: Stanley Yang <Stanley.Yang@amd.com>
Cc: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Luben Tuikov <luben.tuikov@amd.com>
Acked-by: Alexander Deucher <Alexander.Deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Also generilize the code to accept and translate to
HW bits any I2C relvent flags both for read and write.
Cc: Jean Delvare <jdelvare@suse.de>
Cc: Alexander Deucher <Alexander.Deucher@amd.com>
Cc: Andrey Grodzovsky <Andrey.Grodzovsky@amd.com>
Cc: Lijo Lazar <Lijo.Lazar@amd.com>
Cc: Stanley Yang <Stanley.Yang@amd.com>
Cc: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Signed-off-by: Luben Tuikov <luben.tuikov@amd.com>
Reviewed-by: Luben Tuikov <luben.tuikov@amd.com>
Acked-by: Alexander Deucher <Alexander.Deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
EEPROM spec requests this.
v2: Only to be done for write data transactions.
Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Luben Tuikov <luben.tuikov@amd.com>
Not sure that this really matters that much, but these could
have various other hwmon chips on them.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Luben Tuikov <luben.tuikov@amd.com>
Use the new helper rather than doing i2c transfers directly.
v2: fix typo
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Luben Tuikov <luben.tuikov@amd.com>
Use the new helper rather than doing i2c transfers directly.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Luben Tuikov <luben.tuikov@amd.com>
Encapsulates the i2c protocol handling so other parts of the
driver can just tell it the offset and size of data to write.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Luben Tuikov <luben.tuikov@amd.com>
So we lock software as well as hardware access to the bus.
v2: fix mutex handling.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Luben Tuikov <luben.tuikov@amd.com>
