Commit Graph

216879 Commits

Author SHA1 Message Date
Xiao Guangrong
2f4f337248 KVM: MMU: move audit to a separate file
Move the audit code from arch/x86/kvm/mmu.c to arch/x86/kvm/mmu_audit.c

Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2010-10-24 10:51:57 +02:00
Xiao Guangrong
8b1fe17cc7 KVM: MMU: support disable/enable mmu audit dynamicly
Add a r/w module parameter named 'mmu_audit', it can control audit
enable/disable:

enable:
  echo 1 > /sys/module/kvm/parameters/mmu_audit

disable:
  echo 0 > /sys/module/kvm/parameters/mmu_audit

This patch not change the logic

Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2010-10-24 10:51:56 +02:00
Jes Sorensen
84e0cefa8d KVM: Fix guest kernel crash on MSR_K7_CLK_CTL
MSR_K7_CLK_CTL is a no longer documented MSR, which is only relevant
on said old AMD CPU models. This change returns the expected value,
which the Linux kernel is expecting to avoid writing back the MSR,
plus it ignores all writes to the MSR.

Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2010-10-24 10:51:55 +02:00
Avi Kivity
9ed049c3b6 KVM: i8259: Make ICW1 conform to spec
ICW is not a full reset, instead it resets a limited number of registers
in the PIC.  Change ICW1 emulation to only reset those registers.

Signed-off-by: Avi Kivity <avi@redhat.com>
2010-10-24 10:51:54 +02:00
Avi Kivity
7d9ddaedd8 KVM: x86 emulator: clean up control flow in x86_emulate_insn()
x86_emulate_insn() is full of things like

    if (rc != X86EMUL_CONTINUE)
        goto done;
    break;

consolidate all of those at the end of the switch statement.

Signed-off-by: Avi Kivity <avi@redhat.com>
2010-10-24 10:51:54 +02:00
Avi Kivity
a4d4a7c188 KVM: x86 emulator: fix group 11 decoding for reg != 0
These are all undefined.

Signed-off-by: Avi Kivity <avi@redhat.com>
2010-10-24 10:51:53 +02:00
Avi Kivity
b9eac5f4d1 KVM: x86 emulator: use single stage decoding for mov instructions
Signed-off-by: Avi Kivity <avi@redhat.com>
2010-10-24 10:51:52 +02:00
Avi Kivity
e90aa41e6c KVM: Don't save/restore MSR_IA32_PERF_STATUS
It is read/only; restoring it only results in annoying messages.

Signed-off-by: Avi Kivity <avi@redhat.com>
2010-10-24 10:51:51 +02:00
Marcelo Tosatti
eaa48512ba KVM: SVM: init_vmcb should reset vcpu->efer
Otherwise EFER_LMA bit is retained across a SIPI reset.

Fixes guest cpu onlining.

Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2010-10-24 10:51:51 +02:00
Marcelo Tosatti
678041ad9d KVM: SVM: reset mmu context in init_vmcb
Since commit aad827034e no mmu reinitialization is performed
via init_vmcb.

Zero vcpu->arch.cr0 and pass the reset value as a parameter to
kvm_set_cr0.

Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2010-10-24 10:51:50 +02:00
Avi Kivity
c41a15dd46 KVM: Fix pio trace direction
out = write, in = read, not the other way round.

Signed-off-by: Avi Kivity <avi@redhat.com>
2010-10-24 10:51:49 +02:00
Xiao Guangrong
8e0e8afa82 KVM: MMU: remove count_rmaps()
Nothing is checked in count_rmaps(), so remove it

Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2010-10-24 10:51:49 +02:00
Xiao Guangrong
365fb3fdf6 KVM: MMU: rewrite audit_mappings_page() function
There is a bugs in this function, we call gfn_to_pfn() and kvm_mmu_gva_to_gpa_read() in
atomic context(kvm_mmu_audit() is called under the spinlock(mmu_lock)'s protection).

This patch fix it by:
- introduce gfn_to_pfn_atomic instead of gfn_to_pfn
- get the mapping gfn from kvm_mmu_page_get_gfn()

And it adds 'notrap' ptes check in unsync/direct sps

Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2010-10-24 10:51:48 +02:00
Xiao Guangrong
bc32ce2152 KVM: MMU: fix wrong not write protected sp report
The audit code reports some sp not write protected in current code, it's just the
bug in audit_write_protection(), since:

- the invalid sp not need write protected
- using uninitialize local variable('gfn')
- call kvm_mmu_audit() out of mmu_lock's protection

Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2010-10-24 10:51:47 +02:00
Xiao Guangrong
0beb8d6604 KVM: MMU: check rmap for every spte
The read-only spte also has reverse mapping, so fix the code to check them,
also modify the function name to fit its doing

Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2010-10-24 10:51:46 +02:00
Xiao Guangrong
9ad17b1001 KVM: MMU: fix compile warning in audit code
fix:

arch/x86/kvm/mmu.c: In function ‘kvm_mmu_unprotect_page’:
arch/x86/kvm/mmu.c:1741: warning: format ‘%lx’ expects type ‘long unsigned int’, but argument 3 has type ‘gfn_t’
arch/x86/kvm/mmu.c:1745: warning: format ‘%lx’ expects type ‘long unsigned int’, but argument 3 has type ‘gfn_t’
arch/x86/kvm/mmu.c: In function ‘mmu_unshadow’:
arch/x86/kvm/mmu.c:1761: warning: format ‘%lx’ expects type ‘long unsigned int’, but argument 3 has type ‘gfn_t’
arch/x86/kvm/mmu.c: In function ‘set_spte’:
arch/x86/kvm/mmu.c:2005: warning: format ‘%lx’ expects type ‘long unsigned int’, but argument 3 has type ‘gfn_t’
arch/x86/kvm/mmu.c: In function ‘mmu_set_spte’:
arch/x86/kvm/mmu.c:2033: warning: format ‘%lx’ expects type ‘long unsigned int’, but argument 7 has type ‘gfn_t’

Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2010-10-24 10:51:46 +02:00
Jason Wang
23e7a7944f KVM: pit: Do not check pending pit timer in vcpu thread
Pit interrupt injection was done by workqueue, so no need to check
pending pit timer in vcpu thread which could lead unnecessary
unblocking of vcpu.

Signed-off-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2010-10-24 10:51:45 +02:00
Alexander Graf
989044ee0f KVM: PPC: Fix CONFIG_KVM_GUEST && !CONFIG_KVM case
When CONFIG_KVM_GUEST is selected, but CONFIG_KVM is not, we were missing
some defines in asm-offsets.c and included too many headers at other places.

This patch makes above configuration work.

Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Avi Kivity <avi@redhat.com>
2010-10-24 10:51:44 +02:00
Avi Kivity
6230f7fc04 KVM: x86 emulator: simplify ALU opcode block decode further
The ALU opcode block is very regular; introduce D6ALU() to define decode
flags for 6 instructions at a time.

Suggested by Paolo Bonzini.

Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-10-24 10:51:43 +02:00
Avi Kivity
217fc9cfca KVM: Fix build error due to 64-bit division in nsec_to_cycles()
Use do_div() instead.

Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-10-24 10:51:43 +02:00
Avi Kivity
34d1f4905e KVM: x86 emulator: trap and propagate #DE from DIV and IDIV
Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-10-24 10:51:42 +02:00
Avi Kivity
f6b3597bde KVM: x86 emulator: add macros for executing instructions that may trap
Like DIV and IDIV.

Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-10-24 10:51:41 +02:00
Avi Kivity
739ae40606 KVM: x86 emulator: simplify instruction decode flags for opcodes 0F 00-FF
Use the new byte/word dual opcode decode.

Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-10-24 10:51:41 +02:00
Avi Kivity
d269e3961a KVM: x86 emulator: simplify instruction decode flags for opcodes E0-FF
Use the new byte/word dual opcode decode.

Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-10-24 10:51:40 +02:00
Avi Kivity
d2c6c7adb1 KVM: x86 emulator: simplify instruction decode flags for opcodes C0-DF
Use the new byte/word dual opcode decode.

Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-10-24 10:51:39 +02:00
Avi Kivity
50748613d1 KVM: x86 emulator: simplify instruction decode flags for opcodes A0-AF
Use the new byte/word dual opcode decode.

Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-10-24 10:51:38 +02:00
Avi Kivity
76e8e68d44 KVM: x86 emulator: simplify instruction decode flags for opcodes 80-8F
Use the new byte/word dual opcode decode.

Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-10-24 10:51:38 +02:00
Avi Kivity
48fe67b5f7 KVM: x86 emulator: simplify string instruction decode flags
Use the new byte/word dual opcode decode.

Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-10-24 10:51:37 +02:00
Avi Kivity
5315fbb223 KVM: x86 emulator: simplify ALU block (opcodes 00-3F) decode flags
Use the new byte/word dual opcode decode.

Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-10-24 10:51:36 +02:00
Avi Kivity
8d8f4e9f66 KVM: x86 emulator: support byte/word opcode pairs
Many x86 instructions come in byte and word variants distinguished with bit
0 of the opcode.  Add macros to aid in defining them.

Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-10-24 10:51:35 +02:00
Avi Kivity
081bca0e6b KVM: x86 emulator: refuse SrcMemFAddr (e.g. LDS) with register operand
SrcMemFAddr is not defined with the modrm operand designating a register
instead of a memory address.

Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-10-24 10:51:35 +02:00
Gleb Natapov
d2ddd1c483 KVM: x86 emulator: get rid of "restart" in emulation context.
x86_emulate_insn() will return 1 if instruction can be restarted
without re-entering a guest.

Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-10-24 10:51:34 +02:00
Gleb Natapov
3e2f65d57a KVM: x86 emulator: move string instruction completion check into separate function
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-10-24 10:51:33 +02:00
Gleb Natapov
6e2fb2cadd KVM: x86 emulator: Rename variable that shadows another local variable.
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-10-24 10:51:32 +02:00
Wei Yongjun
cc4feed57f KVM: x86 emulator: add CALL FAR instruction emulation (opcode 9a)
Signed-off-by: Wei Yongjun <yjwei@cn.fujitsu.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-10-24 10:51:31 +02:00
Alexander Graf
a3c321c6e2 KVM: S390: Export kvm_virtio.h
As suggested by Christian, we should expose headers to user space with
information that might be valuable there. The s390 virtio interface is
one of those cases. It defines an ABI between hypervisor and guest, so
it should be exposed to user space.

Reported-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-10-24 10:51:30 +02:00
Alexander Graf
cefa33e2f8 KVM: S390: Add virtio hotplug add support
The one big missing feature in s390-virtio was hotplugging. This is no more.
This patch implements hotplug add support, so you can on the fly add new devices
in the guest.

Keep in mind that this needs a patch for qemu to actually leverage the
functionality.

Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-10-24 10:51:29 +02:00
Alexander Graf
fc678d67fe KVM: S390: take a full byte as ext_param indicator
Currenty the ext_param field only distinguishes between "config change" and
"vring interrupt". We can do a lot more with it though, so let's enable a
full byte of possible values and constants to #defines while at it.

Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-10-24 10:51:29 +02:00
Xiao Guangrong
189be38db3 KVM: MMU: combine guest pte read between fetch and pte prefetch
Combine guest pte read between guest pte check in the fetch path and pte prefetch

Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-10-24 10:51:28 +02:00
Xiao Guangrong
957ed9effd KVM: MMU: prefetch ptes when intercepted guest #PF
Support prefetch ptes when intercept guest #PF, avoid to #PF by later
access

If we meet any failure in the prefetch path, we will exit it and
not try other ptes to avoid become heavy path

Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-10-24 10:51:27 +02:00
Xiao Guangrong
48987781eb KVM: MMU: introduce gfn_to_page_many_atomic() function
Introduce this function to get consecutive gfn's pages, it can reduce
gup's overload, used by later patch

Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-10-24 10:51:26 +02:00
Xiao Guangrong
887c08ac19 KVM: MMU: introduce hva_to_pfn_atomic function
Introduce hva_to_pfn_atomic(), it's the fast path and can used in atomic
context, the later patch will use it

Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-10-24 10:51:26 +02:00
Xiao Guangrong
45888a0c6e export __get_user_pages_fast() function
This function is used by KVM to pin process's page in the atomic context.

Define the 'weak' function to avoid other architecture not support it

Acked-by: Nick Piggin <npiggin@suse.de>
Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-10-24 10:51:24 +02:00
Zachary Amsden
f392eb2546 KVM: x86: Add timekeeping documentation
Basic informational document about x86 timekeeping and how KVM
is affected.

Signed-off-by: Zachary Amsden <zamsden@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-10-24 10:51:24 +02:00
Zachary Amsden
1d5f066e0b KVM: x86: Fix a possible backwards warp of kvmclock
Kernel time, which advances in discrete steps may progress much slower
than TSC.  As a result, when kvmclock is adjusted to a new base, the
apparent time to the guest, which runs at a much higher, nsec scaled
rate based on the current TSC, may have already been observed to have
a larger value (kernel_ns + scaled tsc) than the value to which we are
setting it (kernel_ns + 0).

We must instead compute the clock as potentially observed by the guest
for kernel_ns to make sure it does not go backwards.

Signed-off-by: Zachary Amsden <zamsden@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-10-24 10:51:24 +02:00
Zachary Amsden
347bb4448c x86: pvclock: Move scale_delta into common header
The scale_delta function for shift / multiply with 31-bit
precision moves to a common header so it can be used by both
kernel and kvm module.

Signed-off-by: Zachary Amsden <zamsden@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-10-24 10:51:24 +02:00
Zachary Amsden
ca84d1a24c KVM: x86: Add clock sync request to hardware enable
If there are active VCPUs which are marked as belonging to
a particular hardware CPU, request a clock sync for them when
enabling hardware; the TSC could be desynchronized on a newly
arriving CPU, and we need to recompute guests system time
relative to boot after a suspend event.

This covers both cases.

Note that it is acceptable to take the spinlock, as either
no other tasks will be running and no locks held (BSP after
resume), or other tasks will be guaranteed to drop the lock
relatively quickly (AP on CPU_STARTING).

Noting we now get clock synchronization requests for VCPUs
which are starting up (or restarting), it is tempting to
attempt to remove the arch/x86/kvm/x86.c CPU hot-notifiers
at this time, however it is not correct to do so; they are
required for systems with non-constant TSC as the frequency
may not be known immediately after the processor has started
until the cpufreq driver has had a chance to run and query
the chipset.

Updated: implement better locking semantics for hardware_enable

Removed the hack of dropping and retaking the lock by adding the
semantic that we always hold kvm_lock when hardware_enable is
called.  The one place that doesn't need to worry about it is
resume, as resuming a frozen CPU, the spinlock won't be taken.

Signed-off-by: Zachary Amsden <zamsden@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-10-24 10:51:24 +02:00
Zachary Amsden
46543ba45f KVM: x86: Robust TSC compensation
Make the match of TSC find TSC writes that are close to each other
instead of perfectly identical; this allows the compensator to also
work in migration / suspend scenarios.

Signed-off-by: Zachary Amsden <zamsden@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-10-24 10:51:23 +02:00
Zachary Amsden
759379dd68 KVM: x86: Add helper functions for time computation
Add a helper function to compute the kernel time and convert nanoseconds
back to CPU specific cycles.  Note that these must not be called in preemptible
context, as that would mean the kernel could enter software suspend state,
which would cause non-atomic operation.

Also, convert the KVM_SET_CLOCK / KVM_GET_CLOCK ioctls to use the kernel
time helper, these should be bootbased as well.

Signed-off-by: Zachary Amsden <zamsden@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-10-24 10:51:23 +02:00
Zachary Amsden
48434c20e1 KVM: x86: Fix deep C-state TSC desynchronization
When CPUs with unstable TSCs enter deep C-state, TSC may stop
running.  This causes us to require resynchronization.  Since
we can't tell when this may potentially happen, we assume the
worst by forcing re-compensation for it at every point the VCPU
task is descheduled.

Signed-off-by: Zachary Amsden <zamsden@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-10-24 10:51:23 +02:00