6586 Commits

Author SHA1 Message Date
Su Hui
afa8516c86 media: platform: Remove unnecessary (void*) conversions
No need cast (void*) to (struct stdemux *),(struct hva_h264_ctx *)
or (struct hva_h264_task *).

Signed-off-by: Su Hui <suhui@nfschina.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2023-05-25 16:21:20 +02:00
Ming Qian
076b6289b2 media: amphion: initiate a drain of the capture queue in dynamic resolution change
The last buffer from before the change must be marked
with the V4L2_BUF_FLAG_LAST flag,
similarly to the Drain sequence above.

initiate a drain of the capture queue in dynamic resolution change

Fixes: 6de8d628df6e ("media: amphion: add v4l2 m2m vpu decoder stateful driver")
Signed-off-by: Ming Qian <ming.qian@nxp.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2023-05-25 16:21:20 +02:00
Nícolas F. R. A. Prado
4a35700018 Revert "media: mediatek: vcodec: Fix bitstream crop information error"
This reverts commit cd61f3c6794bea2b717fe6083ca2ad189db75418. That
commit's purpose was to prevent the padding from being decoded when
userspace didn't set a selection, relying on the default one.

However, as described in the Step 6 of the Initialization procedure for
the Memory-to-Memory Stateful Video Encoder Interface [1]:

"Set the visible resolution for the stream metadata via
VIDIOC_S_SELECTION() on the OUTPUT queue if it is desired to be
different than the full OUTPUT resolution."

And from the Note:

"To avoid encoding the padding, the client needs to explicitly configure
this selection target"

Hence the behavior in the original commit doesn't follow the interface
and needs to be reverted.

This fixes the following v4l2-compliance failure observed on
mt8192-asurada-spherion:

		fail: v4l2-test-formats.cpp(924): sel.r.width != fmt.g_width()
	test VIDIOC_S_FMT: FAIL

[1] https://www.kernel.org/doc/html/latest/userspace-api/media/v4l/dev-encoder.html#initialization

Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Tested-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2023-05-25 16:21:20 +02:00
Ming Qian
e1d2ccc2cd media: amphion: drop repeated codec data for vc1g format
For format V4L2_PIX_FMT_VC1_ANNEX_G,
the separate codec data is required only once.
The repeated codec data may introduce some decoding error.
so drop the repeated codec data.

It's amphion vpu's limitation

Fixes: e670f5d672ef ("media: amphion: only insert the first sequence startcode for vc1l format")
Signed-off-by: Ming Qian <ming.qian@nxp.com>
Tested-by: xiahong.bao <xiahong.bao@nxp.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2023-05-25 16:21:20 +02:00
Ming Qian
668ee1a3a1 media: amphion: drop repeated codec data for vc1l format
For format V4L2_PIX_FMT_VC1_ANNEX_L,
the codec data is replaced with startcode,
and then driver drop it, otherwise it may led to decoding error.

It's amphion vpu's limitation

Driver has dropped the first codec data,
but need to drop the repeated codec data too.

Fixes: e670f5d672ef ("media: amphion: only insert the first sequence startcode for vc1l format")
Signed-off-by: Ming Qian <ming.qian@nxp.com>
Tested-by: xiahong.bao <xiahong.bao@nxp.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2023-05-25 16:21:20 +02:00
Benjamin Gaignard
59cea5a3e5 media: verisilicon: Simplify error handling in tile_buffer_reallocate()
Rework allocation errors cases handling to simply it
by removing useless tests.

Signed-off-by: Benjamin Gaignard <benjamin.gaignard@collabora.com>
Reported-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2023-05-25 16:21:19 +02:00
Deepak R Varma
b8ed1ceb4a media: platform: mtk-mdp3: release node reference before returning
The iterator for_each_child_of_node() increments the refcount of the
child node it is processing. Release such a reference when the loop
needs to break due to an error during its execution.
Issue identified using for_each_child.cocci Coccinelle semantic patch.

Signed-off-by: Deepak R Varma <drv@mailo.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2023-05-25 16:21:19 +02:00
Lad Prabhakar
e5f29bb9c4 media: platform: rzg2l-cru: rzg2l-csi2: Enclose the macro in parentheses
Fix the below error reported by checkpatch:

ERROR: Macros with complex values should be enclosed in parentheses
					CSIDPHYSKW0_UTIL_DL1_SKW_ADJ(1) | \
					CSIDPHYSKW0_UTIL_DL2_SKW_ADJ(1) | \
					CSIDPHYSKW0_UTIL_DL3_SKW_ADJ(1)

Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2023-05-25 16:21:19 +02:00
Yu Zhe
a41ef78691 media: c8sectpfe: dvb: remove unnecessary (void*) conversions
Pointer variables of void * type do not require type cast.

Link: https://lore.kernel.org/linux-media/20230320070828.13322-1-yuzhe@nfschina.com
Signed-off-by: Yu Zhe <yuzhe@nfschina.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2023-05-14 16:05:28 +01:00
Arnd Bergmann
ae3c253f59 media: platform: mtk-mdp3: work around unused-variable warning
When CONFIG_OF is disabled, the 'data' variable is not used at all
because of_match_node() turns into a dummy macro:

drivers/media/platform/mediatek/mdp3/mtk-mdp3-comp.c: In function 'mdp_comp_sub_create':
drivers/media/platform/mediatek/mdp3/mtk-mdp3-comp.c:1038:36: error: unused variable 'data' [-Werror=unused-variable]
 1038 |  const struct mtk_mdp_driver_data *data = mdp->mdp_data;
      |                                    ^~~~

Remove the variable again by moving the pointer dereference into the
of_match_node call.

Fixes: b385b991ef2f ("media: platform: mtk-mdp3: chip config split about subcomponents")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2023-05-08 12:11:25 +01:00
Arnd Bergmann
55e2a6e36b media: nxp: ignore unused suspend operations
gcc warns about some functions being unused when CONFIG_PM_SLEEP
is disabled:

drivers/media/platform/nxp/imx8-isi/imx8-isi-core.c:328:12: error: 'mxc_isi_pm_resume' defined but not used [-Werror=unused-function]
  328 | static int mxc_isi_pm_resume(struct device *dev)
      |            ^~~~~~~~~~~~~~~~~
drivers/media/platform/nxp/imx8-isi/imx8-isi-core.c:314:12: error: 'mxc_isi_pm_suspend' defined but not used [-Werror=unused-function]
  314 | static int mxc_isi_pm_suspend(struct device *dev)
      |            ^~~~~~~~~~~~~~~~~~

Use the modern SYSTEM_SLEEP_PM_OPS()/RUNTIME_PM_OPS() helpers in place
of the old SET_SYSTEM_SLEEP_PM_OPS()/SET_RUNTIME_PM_OPS() ones.

By convention, use pm_ptr() to guard the reference to the operations.
This makes no difference as long as the driver requires CONFIG_PM,
but is what users of SET_RUNTIME_PM_OPS() are supposed to do.

Fixes: cf21f328fcaf ("media: nxp: Add i.MX8 ISI driver")
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2023-05-08 12:11:25 +01:00
Niklas Söderlund
e10707d586 media: rcar-vin: Select correct interrupt mode for V4L2_FIELD_ALTERNATE
When adding proper support for V4L2_FIELD_ALTERNATE it was missed that
this field format should trigger an interrupt for each field, not just
for the whole frame. Fix this by marking it as progressive in the
capture setup, which will then select the correct interrupt mode.

Tested on both Gen2 and Gen3 with the result of a doubling of the frame
rate for V4L2_FIELD_ALTERNATE. From a PAL video source the frame rate is
now 50, which is expected for alternate field capture.

Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2023-05-08 12:11:25 +01:00
Niklas Söderlund
cb88d8289f media: rcar-vin: Fix NV12 size alignment
When doing format validation for NV12 the width and height should be
aligned to 32 pixels.

Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2023-05-08 12:11:25 +01:00
Niklas Söderlund
879c5a458e media: rcar-vin: Gen3 can not scale NV12
The VIN modules on Gen3 can not scale NV12, fail format validation if
the user tries. Currently no frames are produced if this is attempted.

Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2023-05-08 12:11:24 +01:00
Arnd Bergmann
ba0ad6ed89 media: nxp: imx8-isi: fix buiding on 32-bit
The #if check is wrong, leading to a build failure:

  drivers/media/platform/nxp/imx8-isi/imx8-isi-hw.c: In function 'mxc_isi_channel_set_inbuf':
  drivers/media/platform/nxp/imx8-isi/imx8-isi-hw.c:33:5: error: "CONFIG_ARCH_DMA_ADDR_T_64BIT" is not defined, evaluates to 0 [-Werror=undef]
     33 | #if CONFIG_ARCH_DMA_ADDR_T_64BIT
        |     ^~~~~~~~~~~~~~~~~~~~~~~~~~~~

This could just be an #ifdef, but it seems nicer to just remove the
check entirely.  Apparently the only reason for the #ifdef is to avoid
another warning:

  drivers/media/platform/nxp/imx8-isi/imx8-isi-hw.c:55:24: error: right shift count >= width of type [-Werror=shift-count-overflow]

But this is best avoided by using the lower_32_bits()/upper_32_bits()
helpers.

Fixes: cf21f328fcaf ("media: nxp: Add i.MX8 ISI driver")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2023-05-08 09:10:07 -07:00
Linus Torvalds
58390c8ce1 IOMMU Updates for Linux 6.4
Including:
 
 	- Convert to platform remove callback returning void
 
 	- Extend changing default domain to normal group
 
 	- Intel VT-d updates:
 	    - Remove VT-d virtual command interface and IOASID
 	    - Allow the VT-d driver to support non-PRI IOPF
 	    - Remove PASID supervisor request support
 	    - Various small and misc cleanups
 
 	- ARM SMMU updates:
 	    - Device-tree binding updates:
 	        * Allow Qualcomm GPU SMMUs to accept relevant clock properties
 	        * Document Qualcomm 8550 SoC as implementing an MMU-500
 	        * Favour new "qcom,smmu-500" binding for Adreno SMMUs
 
 	    - Fix S2CR quirk detection on non-architectural Qualcomm SMMU
 	      implementations
 
 	    - Acknowledge SMMUv3 PRI queue overflow when consuming events
 
 	    - Document (in a comment) why ATS is disabled for bypass streams
 
 	- AMD IOMMU updates:
 	    - 5-level page-table support
 	    - NUMA awareness for memory allocations
 
 	- Unisoc driver: Support for reattaching an existing domain
 
 	- Rockchip driver: Add missing set_platform_dma_ops callback
 
 	- Mediatek driver: Adjust the dma-ranges
 
 	- Various other small fixes and cleanups
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEEr9jSbILcajRFYWYyK/BELZcBGuMFAmRONeAACgkQK/BELZcB
 GuPmpw/8C9ruxQ0JU5rcDBXQGvos4gMmxlbELMrBpbbiTtdb35xchpKfdhnECGIF
 k2SrrcF40R/S82SyzNU/eZtGKirtcXvGFraUFgu/QdCcnnqpRHs+IJMXX2NJP+it
 +0wO1uiInt3CN1ERcR4F31cDKiWjDG8bvQVE5LIyiy4KrIU5ld2G91Fkaa0R13Au
 6H+/wKkcUC6OyaGE6wPx474xBkapT20vj5AIQuAWisXJJR0wbBon1sUTo/IRKsU+
 IkNxH0W+1PNImJ+crAdf/nkOlyqoChY4ww6cm07LrOsBLIsX5bCqXfL4HvKthElD
 MEgk2SN5kfjfR5Vf29W4hZVM1CT8VbhO41I7OzaZ6X6RU2PXoldPKlgKtZGeSKn1
 9bcMpSgB0BtbttvBevSkxTo5KHFozXS2DG3DFoMB3yFMme8Th0LrhBZ9oB7NIPNw
 ntMo4K75vviC6Vvzjy4Anj/+y+Zm3W6wDDP7F12O6WZLkK5s4hrSsHUm/MQnnKQP
 muJlG870RnSl73xUQZe3cuBxktXuJ3EHqqYIPE0npzvauu8hhWcis3opf2Y+U2s8
 aBCCIgp5kTKqjHLh2e4lNCKZf1/b/dhxRcRBQhpAIb8YsjMlIJyM+G8Jz6K6gBga
 5Ld+68UQ3oHJwoLV1HCFN8jbpQ9KZn1s9+h3yrYjRAcLNiFb3nU=
 =OvTo
 -----END PGP SIGNATURE-----

Merge tag 'iommu-updates-v6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu

Pull iommu updates from Joerg Roedel:

 - Convert to platform remove callback returning void

 - Extend changing default domain to normal group

 - Intel VT-d updates:
     - Remove VT-d virtual command interface and IOASID
     - Allow the VT-d driver to support non-PRI IOPF
     - Remove PASID supervisor request support
     - Various small and misc cleanups

 - ARM SMMU updates:
     - Device-tree binding updates:
         * Allow Qualcomm GPU SMMUs to accept relevant clock properties
         * Document Qualcomm 8550 SoC as implementing an MMU-500
         * Favour new "qcom,smmu-500" binding for Adreno SMMUs

     - Fix S2CR quirk detection on non-architectural Qualcomm SMMU
       implementations

     - Acknowledge SMMUv3 PRI queue overflow when consuming events

     - Document (in a comment) why ATS is disabled for bypass streams

 - AMD IOMMU updates:
     - 5-level page-table support
     - NUMA awareness for memory allocations

 - Unisoc driver: Support for reattaching an existing domain

 - Rockchip driver: Add missing set_platform_dma_ops callback

 - Mediatek driver: Adjust the dma-ranges

 - Various other small fixes and cleanups

* tag 'iommu-updates-v6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (82 commits)
  iommu: Remove iommu_group_get_by_id()
  iommu: Make iommu_release_device() static
  iommu/vt-d: Remove BUG_ON in dmar_insert_dev_scope()
  iommu/vt-d: Remove a useless BUG_ON(dev->is_virtfn)
  iommu/vt-d: Remove BUG_ON in map/unmap()
  iommu/vt-d: Remove BUG_ON when domain->pgd is NULL
  iommu/vt-d: Remove BUG_ON in handling iotlb cache invalidation
  iommu/vt-d: Remove BUG_ON on checking valid pfn range
  iommu/vt-d: Make size of operands same in bitwise operations
  iommu/vt-d: Remove PASID supervisor request support
  iommu/vt-d: Use non-privileged mode for all PASIDs
  iommu/vt-d: Remove extern from function prototypes
  iommu/vt-d: Do not use GFP_ATOMIC when not needed
  iommu/vt-d: Remove unnecessary checks in iopf disabling path
  iommu/vt-d: Move PRI handling to IOPF feature path
  iommu/vt-d: Move pfsid and ats_qdep calculation to device probe path
  iommu/vt-d: Move iopf code from SVA to IOPF enabling path
  iommu/vt-d: Allow SVA with device-specific IOPF
  dmaengine: idxd: Add enable/disable device IOPF feature
  arm64: dts: mt8186: Add dma-ranges for the parent "soc" node
  ...
2023-04-30 13:00:38 -07:00
Jacopo Mondi
20af6be6be media: nxp: imx8-isi: Remove 300ms sleep after enabling channel
The current implementation of the mxc_isi_channel_enable() function has
a hard 300ms sleep. This was copied from the NXP BSP, which has since
dropped the sleep in a commit that implied the delay was meant to wait
for the sensor to be "stable". As the sensor is started after the ISI,
the delay won't affect sensor operation. Drop it.

Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2023-04-16 07:38:01 +01:00
Laurent Pinchart
2bab9442b8 media: nxp: imx8-isi: Replace udelay() with fsleep()
The ISI driver uses udelay() to wait for 300µs in a context where it can
sleep. Use fsleep() instead.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2023-04-16 07:37:44 +01:00
Laurent Pinchart
605b57c4e8 media: nxp: imx8-isi: Drop partial support for i.MX8QM and i.MX8QXP
Support for the i.MX8QM and i.MX8QXP is only partly implemented and has
never been tested. Furthermore, the corresponding compatible string it
not documented. Drop it, until someone with interest in those platforms
can test and implement it properly.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2023-04-16 07:35:40 +01:00
Laurent Pinchart
cf21f328fc media: nxp: Add i.MX8 ISI driver
The Image Sensing Interface (ISI) combines image processing pipelines
with DMA engines to process and capture frames originating from a
variety of sources. The inputs to the ISI go through Pixel Link
interfaces, and their number and nature is SoC-dependent. They cover
both capture interfaces (MIPI CSI-2 RX, HDMI RX) and memory inputs.

Signed-off-by: Christian Hemp <c.hemp@phytec.de>
Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com>
Signed-off-by: Guoniu Zhou <guoniu.zhou@nxp.com>
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Stefan Riedmueller <s.riedmueller@phytec.de>
Tested-by: Adam Ford <aford173@gmail.com> #imx8mn-beacon
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2023-04-16 07:35:06 +01:00
Ming Qian
3b764ff03d media: imx-jpeg: Encoder add support for 12bit jpeg
enable encoding 12-bit extended jpeg

Signed-off-by: Ming Qian <ming.qian@nxp.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2023-04-15 09:14:58 +01:00
Ming Qian
e7a1494a48 media: imx-jpeg: Decoder add support for 12bit jpeg
enable decoding 12-bit extended jpeg

Signed-off-by: Ming Qian <ming.qian@nxp.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2023-04-15 09:13:59 +01:00
Ming Qian
a14e14bae1 media: imx-jpeg: Clear slot next desc ptr if config error
clear slot next desc ptr if config error,
otherwise codec will report config error interrupt repeatedly,
it may led to system hang.

Signed-off-by: Ming Qian <ming.qian@nxp.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2023-04-15 09:13:31 +01:00
Ming Qian
492b99c2cd media: imx-jpeg: Refine the function mxc_jpeg_find_format
remove the unused parameter ctx

Signed-off-by: Ming Qian <ming.qian@nxp.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2023-04-15 09:13:01 +01:00
Irui Wang
bb02a201b6 media: mediatek: vcodec: Coverity issues in encoder driver
CERT-C Characters and Strings:
check core id is in valid range:
dev->reg_base[dev->venc_pdata->core_id] evaluates to an address
that could be at negative offset of an array.

CERT-C Expression:
check buf is not NULL before used:
Dereferencing buf, which is known to be NULL.

Signed-off-by: Irui Wang <irui.wang@mediatek.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2023-04-15 08:39:22 +01:00
Wei Chen
8fbcf730cb media: mediatek: vcodec: Fix potential array out-of-bounds in decoder queue_setup
variable *nplanes is provided by user via system call argument. The
possible value of q_data->fmt->num_planes is 1-3, while the value
of *nplanes can be 1-8. The array access by index i can cause array
out-of-bounds.

Fix this bug by checking *nplanes against the array size.

Signed-off-by: Wei Chen <harperchen1110@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2023-04-15 08:18:56 +01:00
Yunfei Dong
e2a10b3801 media: mediatek: vcodec: add remove function for decoder platform driver
Need to disable decoder power when remove decoder hardware driver, adding
remove callback function in the definition of platform driver.

Fixes: c05bada35f01 ("media: mtk-vcodec: Add to support multi hardware decode")
Signed-off-by: Yunfei Dong <yunfei.dong@mediatek.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2023-04-15 08:17:39 +01:00
Yunfei Dong
9d2f13fb47 media: mediatek: vcodec: fix decoder disable pm crash
Can't call pm_runtime_disable when the architecture support sub device for
'dev->pm.dev' is NUll, or will get below crash log.

[   10.771551] pc : _raw_spin_lock_irq+0x4c/0xa0
[   10.771556] lr : __pm_runtime_disable+0x30/0x130
[   10.771558] sp : ffffffc01e4cb800
[   10.771559] x29: ffffffc01e4cb800 x28: ffffffdf082108a8
[   10.771563] x27: ffffffc01e4cbd70 x26: ffffff8605df55f0
[   10.771567] x25: 0000000000000002 x24: 0000000000000002
[   10.771570] x23: ffffff85c0dc9c00 x22: 0000000000000001
[   10.771573] x21: 0000000000000001 x20: 0000000000000000
[   10.771577] x19: 00000000000000f4 x18: ffffffdf2e9fbe18
[   10.771580] x17: 0000000000000000 x16: ffffffdf2df13c74
[   10.771583] x15: 00000000000002ea x14: 0000000000000058
[   10.771587] x13: ffffffdf2de1b62c x12: ffffffdf2e9e30e4
[   10.771590] x11: 0000000000000000 x10: 0000000000000001
[   10.771593] x9 : 0000000000000000 x8 : 00000000000000f4
[   10.771596] x7 : 6bff6264632c6264 x6 : 0000000000008000
[   10.771600] x5 : 0080000000000000 x4 : 0000000000000001
[   10.771603] x3 : 0000000000000008 x2 : 0000000000000001
[   10.771608] x1 : 0000000000000000 x0 : 00000000000000f4
[   10.771613] Call trace:
[   10.771617]  _raw_spin_lock_irq+0x4c/0xa0
[   10.771620]  __pm_runtime_disable+0x30/0x130
[   10.771657]  mtk_vcodec_probe+0x69c/0x728 [mtk_vcodec_dec 800cc929d6631f79f9b273254c8db94d0d3500dc]
[   10.771662]  platform_drv_probe+0x9c/0xbc
[   10.771665]  really_probe+0x13c/0x3a0
[   10.771668]  driver_probe_device+0x84/0xc0
[   10.771671]  device_driver_attach+0x54/0x78

Fixes: ba31a5b39400 ("media: mtk-vcodec: Remove mtk_vcodec_release_dec_pm")
Signed-off-by: Yunfei Dong <yunfei.dong@mediatek.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2023-04-15 08:15:13 +01:00
Ye Xingchen
0b44232be7 media: hantro: use devm_reset_control_array_get_optional_exclusive()
Switch to devm_reset_control_array_get_optional_exclusive() API.

Signed-off-by: Ye Xingchen <ye.xingchen@zte.com.cn>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2023-04-15 08:14:53 +01:00
Joerg Roedel
e51b419839 Merge branches 'iommu/fixes', 'arm/allwinner', 'arm/exynos', 'arm/mediatek', 'arm/omap', 'arm/renesas', 'arm/rockchip', 'arm/smmu', 'ppc/pamu', 'unisoc', 'x86/vt-d', 'x86/amd', 'core' and 'platform-remove_new' into next 2023-04-14 13:45:50 +02:00
Benjamin Gaignard
f100ce3bbd media: verisilicon: Fix crash when probing encoder
ctx->vpu_dst_fmt is no more initialized before calling hantro_try_fmt()
so assigne it to vpu_fmt led to crash the kernel.
Like for decoder case use 'fmt' as format for encoder and clean up
the code.

Signed-off-by: Benjamin Gaignard <benjamin.gaignard@collabora.com>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Fixes: db6f68b51e5c ("media: verisilicon: Do not set context src/dst formats in reset functions")
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2023-04-13 12:58:55 +02:00
Yong Wu
aa0ee7b4d5 media: mediatek: vcodec: Remove the setting for dma_mask
In order to simplify the masters to set their respective dma masks, MTK
IOMMU helps to centralize the processing. Because all the dma ranges is
set in IOMMU, IOMMU knows well the dma mask requirements of masters. After
this patch, the masters(codec here) code does not need care
dma-ranges/dma_mask related information.

Cc: Tiffany Lin <tiffany.lin@mediatek.com>
Cc: Andrew-CT Chen <andrew-ct.chen@mediatek.com>
Cc: Yunfei Dong <yunfei.dong@mediatek.com>
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
Cc: irui wang <irui.wang@mediatek.com>
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Acked-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20230411093144.2690-12-yong.wu@mediatek.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
2023-04-13 11:59:27 +02:00
Yong Wu
7d35584d9c media: mtk-jpegdec: Remove the setting for dma_mask
In order to simplify the masters to set their respective dma masks, MTK
IOMMU helps to centralize the processing. Because all the dma ranges is
set in IOMMU, IOMMU knows well the dma mask requirements of masters. After
this patch, the masters code does not need care
dma-ranges/dma_mask related information.

Cc: Bin Liu <bin.liu@mediatek.com>
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
Cc: kyrie wu <kyrie.wu@mediatek.com>
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Acked-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20230411093144.2690-11-yong.wu@mediatek.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
2023-04-13 11:59:27 +02:00
Laurent Pinchart
e18a7e9a2d media: Use designated initializers for all subdev pad ops
Structures passed to subdev pad operations are all zero-initialized when
declaring variables. In most cases, this is done with designated
initializers to initialize some of the fields to specific values, but in
a minority of cases the structures are zero-initialized by assigning
them to '{ 0 }' or '{ }'.

Improve coding style consistency by using designated initializers where
possible, always initializing the 'which' field.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2023-04-12 09:46:07 +02:00
Laurent Pinchart
e3a69496a1 media: Prefer designated initializers over memset for subdev pad ops
Structures passed to subdev pad operations are all zero-initialized, but
not always with the same kind of code constructs. While most drivers
used designated initializers, which zero all the fields that are not
specified, when declaring variables, some use memset(). Those two
methods lead to the same end result, and, depending on compiler
optimizations, may even be completely equivalent, but they're not
consistent.

Improve coding style consistency by using designated initializers
instead of calling memset(). Where applicable, also move the variables
to inner scopes of for loops to ensure correct initialization in all
iterations.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Lad Prabhakar <prabhakar.csengg@gmail.com> # For am437x
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2023-04-12 09:46:06 +02:00
Laurent Pinchart
ecefa105cc media: Zero-initialize all structures passed to subdev pad operations
Several drivers call subdev pad operations, passing structures that are
not fully zeroed. While the drivers initialize the fields they care
about explicitly, this results in reserved fields having uninitialized
values. Future kernel API changes that make use of those fields thus
risk breaking proper driver operation in ways that could be hard to
detect.

To avoid this, make the code more robust by zero-initializing all the
structures passed to subdev pad operation. Maintain a consistent coding
style by preferring designated initializers (which zero-initialize all
the fields that are not specified) over memset() where possible, and
make variable declarations local to inner scopes where applicable. One
notable exception to this rule is in the ipu3 driver, where a memset()
is needed as the structure is not a local variable but a function
parameter provided by the caller.

Not all fields of those structures can be initialized when declaring the
variables, as the values for those fields are computed later in the
code. Initialize the 'which' field in all cases, and other fields when
the variable declaration is so close to the v4l2_subdev_call() call that
it keeps all the context easily visible when reading the code, to avoid
hindering readability.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Shuah Khan <skhan@linuxfoundation.org> # For vimc
Reviewed-by: Lad Prabhakar <prabhakar.csengg@gmail.com> # For am437x
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de> # For drivers/staging/media/imx/
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2023-04-12 09:46:06 +02:00
Laurent Pinchart
a8ca0cf1ff media: imx-jpeg: Fix incorrect indentation
Variable initialization code in notify_src_chg() is incorrectly
indented. Fix it.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2023-04-12 09:46:06 +02:00
Laurent Pinchart
a1e259872f media: Fix indentation issues introduced by subdev-wide state struct
Commit 0d346d2a6f54 ("media: v4l2-subdev: add subdev-wide state struct")
applied a large media tree-wide change produced by coccinelle. It was so
large that a set of identical indentation issues went unnoticed during
review. Fix them.

While at it, and because it's easy to review both changes together, add
a trailing comma for the last (and only) struct member initialization of
the related structures, to avoid future changes should new fields need
to be initialized.

Fixes: 0d346d2a6f54 ("media: v4l2-subdev: add subdev-wide state struct")
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2023-04-12 09:46:06 +02:00
Fritz Koenig
a47a3ae5fc media: venus: Correct P010 buffer alignment
According to msm_media_info.h the correct alignment
for the stride of P010 buffers is 128.

Signed-off-by: Fritz Koenig <frkoenig@chromium.org>
Reviewed-by: Vikash Garodia <quic_vgarodia@quicinc.com>
Signed-off-by: Stanimir Varbanov <stanimir.k.varbanov@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2023-04-12 09:35:44 +02:00
Dikshita Agarwal
7493db46e4 venus: venc: add handling for VIDIOC_ENCODER_CMD
Add handling for below commands in encoder:
1. V4L2_ENC_CMD_STOP
2. V4L2_ENC_CMD_START

Signed-off-by: Dikshita Agarwal <quic_dikshita@quicinc.com>
Signed-off-by: Stanimir Varbanov <stanimir.k.varbanov@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2023-04-12 09:35:44 +02:00
Viswanath Boma
90655e2e79 venus: Add support for min/max qp range.
Currently QP range set from client is not communicated to video firmware.
Add support for the QP range HFI to set the same to firmware.

Signed-off-by: Viswanath Boma <quic_vboma@quicinc.com>
Signed-off-by: Vikash Garodia <quic_vgarodia@quicinc.com>
Signed-off-by: Stanimir Varbanov <stanimir.k.varbanov@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2023-04-12 09:35:44 +02:00
Javier Martinez Canillas
a9d45ec74c media: venus: dec: Fix capture formats enumeration order
Commit 9593126dae3e ("media: venus: Add a handling of QC08C compressed
format") and commit cef92b14e653 ("media: venus: Add a handling of QC10C
compressed format") added support for the QC08C and QC10C compressed
formats respectively.

But these also caused a regression, because the new formats where added
at the beginning of the vdec_formats[] array and the vdec_inst_init()
function sets the default format output and capture using fixed indexes
of that array:

static void vdec_inst_init(struct venus_inst *inst)
{
...
	inst->fmt_out = &vdec_formats[8];
	inst->fmt_cap = &vdec_formats[0];
...
}

Since now V4L2_PIX_FMT_NV12 is not the first entry in the array anymore,
the default capture format is not set to that as it was done before.

Both commits changed the first index to keep inst->fmt_out default format
set to V4L2_PIX_FMT_H264, but did not update the latter to keep .fmt_out
default format set to V4L2_PIX_FMT_NV12.

Rather than updating the index to the current V4L2_PIX_FMT_NV12 position,
let's reorder the entries so that this format is the first entry again.

This would also make VIDIOC_ENUM_FMT report the V4L2_PIX_FMT_NV12 format
with an index 0 as it did before the QC08C and QC10C formats were added.

Fixes: 9593126dae3e ("media: venus: Add a handling of QC08C compressed format")
Fixes: cef92b14e653 ("media: venus: Add a handling of QC10C compressed format")
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Signed-off-by: Stanimir Varbanov <stanimir.k.varbanov@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2023-04-12 09:35:44 +02:00
Viswanath Boma
bfe1326573 venus: Fix for H265 decoding failure.
Aligned the mismatch of persist1 and scratch1 buffer calculation,
as per the firmware requirements.

Signed-off-by: Vikash Garodia <vgarodia@qti.qualcomm.com>
Signed-off-by: Viswanath Boma <quic_vboma@quicinc.com>
Tested-by: Nathan Hebert <nhebert@chromium.org>
Signed-off-by: Stanimir Varbanov <stanimir.k.varbanov@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2023-04-12 09:35:44 +02:00
Michał Krawczyk
50248ad9f1 media: venus: dec: Fix handling of the start cmd
The decoder driver should clear the last_buffer_dequeued flag of the
capture queue upon receiving V4L2_DEC_CMD_START.

The last_buffer_dequeued flag is set upon receiving EOS (which always
happens upon receiving V4L2_DEC_CMD_STOP).

Without this patch, after issuing the V4L2_DEC_CMD_STOP and
V4L2_DEC_CMD_START, the vb2_dqbuf() function will always fail, even if
the buffers are completed by the hardware.

Fixes: beac82904a87 ("media: venus: make decoder compliant with stateful codec API")

Signed-off-by: Michał Krawczyk <mk@semihalf.com>
Signed-off-by: Stanimir Varbanov <stanimir.k.varbanov@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2023-04-12 09:35:44 +02:00
Krzysztof Kozlowski
8255140ee6 media: venus: drop unused opp_table field documentation
The struct venus_format does not have a "opp_table" field.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2023-04-11 18:54:01 +02:00
Wolfram Sang
af4273b43f media: renesas: fdp1: remove R-Car H3 ES1.* handling
R-Car H3 ES1.* was only available to an internal development group and
needed a lot of quirks and workarounds. These become a maintenance
burden now, so our development group decided to remove upstream support
and disable booting for this SoC. Public users only have ES2 onwards.

Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2023-04-11 18:54:01 +02:00
Wolfram Sang
2f13170906 media: rcar-vin: csi2: remove R-Car H3 ES1.* handling
R-Car H3 ES1.* was only available to an internal development group and
needed a lot of quirks and workarounds. These become a maintenance
burden now, so our development group decided to remove upstream support
and disable booting for this SoC. Public users only have ES2 onwards.

Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2023-04-11 18:54:01 +02:00
Wolfram Sang
8584e4bea3 media: rcar-vin: remove R-Car H3 ES1.* handling
R-Car H3 ES1.* was only available to an internal development group and
needed a lot of quirks and workarounds. These become a maintenance
burden now, so our development group decided to remove upstream support
and disable booting for this SoC. Public users only have ES2 onwards.

Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2023-04-11 18:54:01 +02:00
Rob Herring
0f4afd5292 media: Use of_property_present() for testing DT property presence
It is preferred to use typed property access functions (i.e.
of_property_read_<type> functions) rather than low-level
of_get_property/of_find_property functions for reading properties. As
part of this, convert of_get_property/of_find_property calls to the
recently added of_property_present() helper when we just want to test
for presence of a property and nothing more.

Signed-off-by: Rob Herring <robh@kernel.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2023-04-11 18:54:01 +02:00
Alexander Stein
6cf9e3572e media: imx: imx7-media-csi: Fail on invalid type in VIDIOC_G_SELECTION
This device only supports video capture, so bail out if invalid
selection type is passed.

Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Rui Miguel Silva <rmfrfs@gmail.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2023-04-11 18:11:53 +02:00