IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
Current snd_soc_is_matching_component() checks "of_node" or "dai_args".
Thus coping "of_node" only is not enough to use CPU as Platform.
This patch adds snd_soc_dlc_use_cpu_as_platform() and help it.
This is helper function for multi Component support.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87cz10o94k.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
To enable multi Component, Card driver need to get DAI via dai_args
to identify it. This patch adds snd_soc_get_dai_via_args() for it.
This is helper function for multi Component support.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87edlgo94p.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Current ASoC Card is using dlc (snd_soc_dai_link_component) to find
target DAI / Component to be used.
Current dlc has below 3 items to identify DAI / Component
(a) name for Component
(b) of_node for Component
(c) dai_name for DAI
(a) or (b) is used to identify target Component, and (c) is used
to identify DAI.
One of the biggest issue on it today is dlc needs "name matching"
for "dai_name" (c).
It was not a big deal when we were using platform_device, because we
could specify nessesary "dai_name" via its platform_data.
But we need to find DAI name pointer from whole registered datas and/or
each related driver somehow in case of DT, because we can't specify it.
Therefore, Card driver parses DT and assumes the DAI, and find its name
pointer. How to assume is based on each Component and/or Card.
Next biggest issue is Component node (a)/(b).
Basically, Component is registered when CPU/Codec driver was
probed() (X). Here, 1 Component is possible to have some DAIs.
int xxx_probe(struct platform_device *pdev)
{
...
(X) ret = devm_snd_soc_register_component(pdev->dev,
&component_driver,
&dai_driver, dai_driver_num);
...
}
The image of each data will be like below.
One note here is "driver" is included for later explanation.
+-driver------+
|+-component-+|
|| dai0||
|| dai1||
|| ...||
|+-----------+|
+-------------+
The point here is 1 driver has 1 Component, because basically driver
calles snd_soc_register_component() (= X) once.
Here is the very basic CPU/Codec connection image.
HW image SW image
+-- Board ------------+ +-card--------------------------+
|+-----+ +------+| |+-driver------+ +-driver------+|
|| CPU | <--> |CodecA|| ||+-component-+| |+-component-+||
|+-----+ +------+| ||| dai|<=>|dai |||
+---------------------+ ||+-----------+| |+-----------+||
|+-------------+ +-------------+|
+-------------------------------+
It will be very complex if it has multi DAIs.
Here is intuitive easy to understandable HW / SW example.
HW image SW image
+-- Board ---------------+ +-card--------------------------+
|+--------+ +------+| |+-driver------+ +-driver------+|
|| CPU ch0| <--> |CodecA|| ||+-component-+| |+-component-+||
|| | +------+| ||| ch0 dai|<=>|dai |||
|| | +------+| ||| || |+-----------+||
|| ch1| <--> |CodecB|| ||| || +-------------+|
|+--------+ +------+| ||| || +-driver------+|
+------------------------+ ||| || |+-component-+||
||| ch1 dai|<=>|dai |||
||+-----------+| |+-----------+||
|+-------------+ +-------------+|
+-------------------------------+
It will be handled as multi interface as "one Card".
card0,0: CPU-ch0 - CodecA
card0,1: CPU-ch1 - CodecB
^
But, here is the HW image example which will be more complex
+-- Basic Board ---------+
|+--------+ +------+|
|| CPU ch0| <--> |CodecA||
|| ch1| <-+ +------+|
|+--------+ | |
+-------------|----------+
+-- expansion board -----+
| | +------+|
| +->|CodecB||
| +------+|
+------------------------+
We intuitively think we want to handle these as "2 Sound Cards".
card0,0: CPU-ch0 - CodecA
card1,0: CPU-ch1 - CodecB
^
But below image which we can register today doesn't allow it,
because the same Component will be connected to both Card0/1,
but it will be rejected by (Z).
+-driver------+
|+-component-+|
+-card0-------------------------+
||| || +-driver------+|
||| || |+-component-+||
||| ch0 dai|<=>|dai |||
||| || |+-----------+||
||| || +-------------+|
+-------------------------------+
|| ||
+-card1-------------------------+
||| || +-driver------+|
||| || |+-component-+||
||| ch1 dai|<=>|dai |||
||| || |+-----------+||
||| || +-------------+|
+-------------------------------+
|+-----------+|
+-------------+
static int soc_probe_component()
{
...
if (component->card) {
(Z) if (component->card != card) {
dev_err(component->dev, ...);
return -ENODEV;
}
return 0;
}
...
}
So, how about to call snd_soc_register_component() (= X) multiple times
on probe() to avoid buplicated component->card limitation, to be like
below ?
+-driver------+
+-card0-------------------------+
|| | +-driver------+|
||+-component-+| |+-component-+||
||| ch0 dai|<=>|dai |||
||+-----------+| |+-----------+||
|| | +-------------+|
+-------------------------------+
| |
+-card1-------------------------+
|| | +-driver------+|
||+-component-+| |+-component-+||
||| ch1 dai|<=>|dai |||
||+-----------+| |+-----------+||
|| | +-------------+|
+-------------------------------+
+-------------+
Yes, looks good. But unfortunately it doesn't help us for now.
Let's see soc_component_to_node() and snd_soc_is_matching_component()
static struct device_node
*soc_component_to_node(struct snd_soc_component *component)
{
...
(A) of_node = component->dev->of_node;
...
}
static int snd_soc_is_matching_component(...)
{
...
(B) if (dlc->of_node && component_of_node != dlc->of_node)
...
}
dlc checkes "of_node" to identify target component (B),
but this "of_node" came from component->dev (A) which is added
by snd_soc_register_component() (X) on probe().
This means we can have different "component->card", but have same
"component->dev" in this case.
Even though we calls snd_soc_register_component() (= X) multiple times,
all Components have same driver's dev, thus it is impossible to
identified the Component.
And if it was impossible to identify Component, it is impossible to
identify DAI on current implementation.
So, how to handle above complex HW image today is 2 patterns.
One is handles it as "1 big sound card".
The SW image is like below.
SW image
+-card--------------------------+
|+-driver------+ +-driver------+|
||+-component-+| |+-component-+||
||| ch0 dai|<=>|dai |||
||| || |+-----------+||
||| || +-------------+|
||| || +-driver------+|
||| || |+-component-+||
||| ch1 dai|<->|dai |||
||+-----------+| |+-----------+||
|+-------------+ +-------------+|
+-------------------------------+
But the problem is not intuitive.
We want to handle it as "2 Cards".
2nd pattern is like below.
SW image
+-card0-------------------------+
|+-driver------+ +-driver------+|
||+-component-+| |+-component-+||
||| ch0 dai|<=>|dai |||
||+-----------+| |+-----------+||
|+-------------+ +-------------+|
+-------------------------------+
+-card1-------------------------+
|+-driver------+ +-driver------+|
||+-component-+| |+-component-+||
||| ch1 dai|<=>|dai |||
||+-----------+| |+-----------+||
|+-------------+ +-------------+|
+-------------------------------+
It handles as "2 Cards", but CPU part needs to be probed as 2 drivers.
It is also not intuitive.
To solve this issue, we need to have multi Component support.
In current implementation, we need to identify Component first
to identify DAI, and it is using name matching to identify DAI.
But how about to be enable to directly identify DAI by unique way
instead of name matching ? In such case, we can directly identify DAI,
then it can identify Component from DAI.
For example Simple-Card / Audio-Graph-Card case, it is specifying DAI
via its node.
Simple-Card
sound-dai = <&cpu-sound>;
Audio-Graph-Card
dais = <&cpu-sound>;
If each CPU/Codec driver keeps this property when probing,
we can identify DAI directly from Card.
Being able to identify DAI directly means being able to identify its
Component as well even though Component has same dev (= B).
This patch adds new "dai_node" for it.
To keeping compatibility, it checks "dai_node" first if it has,
otherwise, use existing method (name matching).
Link: https://lore.kernel.org/r/87fskz5yrr.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87fs5wo94v.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Current ASoC is specifying and checking DAI name.
But where it came from and how to check was ambiguous.
This patch adds snd_soc_dai_name_get() / snd_soc_dlc_dai_is_match()
and makes it clear.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87h6qco952.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The maple tree register cache is based on a much more modern data structure
than the rbtree cache and makes optimisation choices which are probably
more appropriate for modern systems than those made by the rbtree cache. In
v6.5 it has also acquired the ability to generate multi-register writes in
sync operations, bringing performance up to parity with the rbtree cache
there.
Update the wsa883x driver to use the more modern data structure.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230712-asoc-qcom-maple-v1-4-15f8089664b9@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The maple tree register cache is based on a much more modern data structure
than the rbtree cache and makes optimisation choices which are probably
more appropriate for modern systems than those made by the rbtree cache. In
v6.5 it has also acquired the ability to generate multi-register writes in
sync operations, bringing performance up to parity with the rbtree cache
there.
Update the wsa881x driver to use the more modern data structure.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230712-asoc-qcom-maple-v1-3-15f8089664b9@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The maple tree register cache is based on a much more modern data structure
than the rbtree cache and makes optimisation choices which are probably
more appropriate for modern systems than those made by the rbtree cache. In
v6.5 it has also acquired the ability to generate multi-register writes in
sync operations, bringing performance up to parity with the rbtree cache
there.
Update the wcd938x driver to use the more modern data structure.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230712-asoc-qcom-maple-v1-2-15f8089664b9@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The maple tree register cache is based on a much more modern data structure
than the rbtree cache and makes optimisation choices which are probably
more appropriate for modern systems than those made by the rbtree cache. In
v6.5 it has also acquired the ability to generate multi-register writes in
sync operations, bringing performance up to parity with the rbtree cache
there.
Update the wcd9335 driver to use the more modern data structure.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230712-asoc-qcom-maple-v1-1-15f8089664b9@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
This doesn't check how many bytes the simple_write_to_buffer() writes to
the buffer. The only thing that we know is that the first byte is
initialized and the last byte of the buffer is set to NUL. However
the middle bytes could be uninitialized.
There is no need to use simple_write_to_buffer(). This code does not
support partial writes but instead passes "pos = 0" as the starting
offset regardless of what the user passed as "*ppos". Just use the
copy_from_user() function and initialize the whole buffer.
Fixes: 671e0b9005 ("ASoC: SOF: Clone the trace code to ipc3-dtrace as fw_tracing implementation")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://lore.kernel.org/r/74148292-ce4d-4e01-a1a7-921e6767da14@moroto.mountain
Signed-off-by: Mark Brown <broonie@kernel.org>
In commit 2cb1e0259f ("ASoC: cs42l51: re-hook of_match_table
pointer"), 9 years ago, some random guy fixed the cs42l51 after it was
split into a core part and an I2C part to properly match based on a
Device Tree compatible string.
However, the fix in this commit is wrong: the MODULE_DEVICE_TABLE(of,
....) is in the core part of the driver, not the I2C part. Therefore,
automatic module loading based on module.alias, based on matching with
the DT compatible string, loads the core part of the driver, but not
the I2C part. And threfore, the i2c_driver is not registered, and the
codec is not known to the system, nor matched with a DT node with the
corresponding compatible string.
In order to fix that, we move the MODULE_DEVICE_TABLE(of, ...) into
the I2C part of the driver. The cs42l51_of_match[] array is also moved
as well, as it is not possible to have this definition in one file,
and the MODULE_DEVICE_TABLE(of, ...) invocation in another file, due
to how MODULE_DEVICE_TABLE works.
Thanks to this commit, the I2C part of the driver now properly
autoloads, and thanks to its dependency on the core part, the core
part gets autoloaded as well, resulting in a functional sound card
without having to manually load kernel modules.
Fixes: 2cb1e0259f ("ASoC: cs42l51: re-hook of_match_table pointer")
Cc: stable@vger.kernel.org
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Link: https://lore.kernel.org/r/20230713112112.778576-1-thomas.petazzoni@bootlin.com
Signed-off-by: Mark Brown <broonie@kernel.org>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmS0at0eHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiG6m8H/RZCd2DWeM94CgK5
DIxNLxu90PrEcrOnqeHFJtQoSiUQTHeseh9E4BH0JdPDxtlU89VwYRAevseWiVkp
JyyJPB40UR4i2DO0P1+oWBBsGEG+bo8lZ1M+uxU5k6lgC0fAi96/O48mwwmI0Mtm
P6BkWd3IkSXc7l4AGIrKa5P+pYEnm0Z6YAZILfdMVBcLXZWv1OAwEEkZNdUuhE3d
5DxlQ8MLzlQIbe+LasiwdL9r606acFaJG9Hewl9x5DBlsObZ3d2rX4vEt1NEVh89
shV29xm2AjCpLh4kstJFdTDCkDw/4H7TcFB/NMxXyzEXp3Bx8YXq+mjVd2mpq1FI
hHtCsOA=
=KiaU
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmS0zgsACgkQJNaLcl1U
h9C8Zwf9HZwtLMlojz17PYAkErGIwAGzwH8jsBmWnOwMuifQi8ofpFLv0gFz17k0
P3bIyXBc4JV3I0+A+b5+sv+BOtaUk9pWSoLIn5SAEK0ydfqpWhkKou2eoMmGt/UW
Zv6WSCfgN7K2XiXIuvUBjyr4F57m+GMb5/UIPDv01TPrOb+Usz6kmZwgtRqpOTE4
ozDNUwNtx074h7ZHNx/taP7i2bt9pD+KnY6KgJ/6S9QtCE7+SCuDGIV35YFJx/8R
b+hrmm40ES7GP/qYXZ+OF+iBAm7svs6nSKbkSmKxZZDHc9i4GkOOt8yI3TvF2GPf
uTFjjLNuZEHat5ksZfFCbdEAlYR0sQ==
=x+J9
-----END PGP SIGNATURE-----
ASoC: Merge v6.5-rc2
Get a similar baseline to my other branches, and fixes for people using
the branch.
The internal analog power and hp Vref of es8326 should always be on to
reduce pop noise. The HP_VOL and HP_CAL are moved to es8326_mute function
so they are turned on at last and turned off at first.
Also, the calibration should be done manually once during start-up
to reduce DC offset on headphone.
Signed-off-by: Zhu Ning <zhuning0077@gmail.com>
Link: https://lore.kernel.org/r/20230714032453.3334-1-zhuning0077@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Remove the class-D internal register setting during initialization
to be compatible with most speaker designs to avoid noise.
Signed-off-by: Derek Fang <derek.fang@realtek.com>
Link: https://lore.kernel.org/r/20230712062553.31066-1-derek.fang@realtek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Mark Brown <broonie@kernel.org>:
The maple tree register cache has now got to feature parity with the
rbtree cache, there are some different tradeoffs made and it should be a
better choice for most modern systems. Convert the Analog Devices
drivers to use the more modern data structure.
Signed-off-by: Mark Brown <broonie@kernel.org>
---
Mark Brown (10):
ASoC: ad1836: Update to use maple tree register cache
ASoC: ad1980: Update to use maple tree register cache
ASoC: adau1372: Update to use maple tree register cache
ASoC: adau1373: Update to use maple tree register cache
ASoC: adau1701: Update to use maple tree register cache
ASoC: adau1761: Update to use maple tree register cache
ASoC: adau1781: Update to use maple tree register cache
ASoC: adau1977: Update to use maple tree register cache
ASoC: adau7118: Update to use maple tree register cache
ASoC: adav80x: Update to use maple tree register cache
sound/soc/codecs/ad1836.c | 2 +-
sound/soc/codecs/ad1980.c | 2 +-
sound/soc/codecs/adau1372.c | 2 +-
sound/soc/codecs/adau1373.c | 2 +-
sound/soc/codecs/adau1701.c | 2 +-
sound/soc/codecs/adau1761.c | 2 +-
sound/soc/codecs/adau1781.c | 2 +-
sound/soc/codecs/adau1977.c | 2 +-
sound/soc/codecs/adau7118-i2c.c | 2 +-
sound/soc/codecs/adav80x.c | 2 +-
10 files changed, 10 insertions(+), 10 deletions(-)
---
base-commit: 06c2afb862
change-id: 20230701-asoc-ad-maple-170068cf0c39
Best regards,
--
Mark Brown <broonie@kernel.org>
This patch fixes the following sprse warning:
sound/soc/qcom/qdsp6/q6apm.c:30:14: sparse: warning: symbol 'g_apm' was not declared. Should it be static?
No functional change intended
Signed-off-by: Min-Hua Chen <minhuadotchen@gmail.com>
Link: https://lore.kernel.org/r/20230713151744.86072-1-minhuadotchen@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The maple tree register cache is based on a much more modern data structure
than the rbtree cache and makes optimisation choices which are probably
more appropriate for modern systems than those made by the rbtree cache. In
v6.5 it has also acquired the ability to generate multi-register writes in
sync operations, bringing performance up to parity with the rbtree cache
there.
Update the adav80x driver to use the more modern data structure.
Reviewed-by: Nuno Sa <nuno.sa@analog.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230713-asoc-ad-maple-v1-10-7d2f35d42b5f@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The maple tree register cache is based on a much more modern data structure
than the rbtree cache and makes optimisation choices which are probably
more appropriate for modern systems than those made by the rbtree cache. In
v6.5 it has also acquired the ability to generate multi-register writes in
sync operations, bringing performance up to parity with the rbtree cache
there.
Update the adau7118 driver to use the more modern data structure.
Reviewed-by: Nuno Sa <nuno.sa@analog.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230713-asoc-ad-maple-v1-9-7d2f35d42b5f@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The maple tree register cache is based on a much more modern data structure
than the rbtree cache and makes optimisation choices which are probably
more appropriate for modern systems than those made by the rbtree cache. In
v6.5 it has also acquired the ability to generate multi-register writes in
sync operations, bringing performance up to parity with the rbtree cache
there.
Update the adau1977 driver to use the more modern data structure.
Reviewed-by: Nuno Sa <nuno.sa@analog.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230713-asoc-ad-maple-v1-8-7d2f35d42b5f@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The maple tree register cache is based on a much more modern data structure
than the rbtree cache and makes optimisation choices which are probably
more appropriate for modern systems than those made by the rbtree cache. In
v6.5 it has also acquired the ability to generate multi-register writes in
sync operations, bringing performance up to parity with the rbtree cache
there.
Update the adau1781 driver to use the more modern data structure.
Reviewed-by: Nuno Sa <nuno.sa@analog.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230713-asoc-ad-maple-v1-7-7d2f35d42b5f@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The maple tree register cache is based on a much more modern data structure
than the rbtree cache and makes optimisation choices which are probably
more appropriate for modern systems than those made by the rbtree cache. In
v6.5 it has also acquired the ability to generate multi-register writes in
sync operations, bringing performance up to parity with the rbtree cache
there.
Update the adau1761 driver to use the more modern data structure.
Reviewed-by: Nuno Sa <nuno.sa@analog.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230713-asoc-ad-maple-v1-6-7d2f35d42b5f@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The maple tree register cache is based on a much more modern data structure
than the rbtree cache and makes optimisation choices which are probably
more appropriate for modern systems than those made by the rbtree cache. In
v6.5 it has also acquired the ability to generate multi-register writes in
sync operations, bringing performance up to parity with the rbtree cache
there.
Update the adau1701 driver to use the more modern data structure.
Reviewed-by: Nuno Sa <nuno.sa@analog.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230713-asoc-ad-maple-v1-5-7d2f35d42b5f@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The maple tree register cache is based on a much more modern data structure
than the rbtree cache and makes optimisation choices which are probably
more appropriate for modern systems than those made by the rbtree cache. In
v6.5 it has also acquired the ability to generate multi-register writes in
sync operations, bringing performance up to parity with the rbtree cache
there.
Update the adau1373 driver to use the more modern data structure.
Reviewed-by: Nuno Sa <nuno.sa@analog.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230713-asoc-ad-maple-v1-4-7d2f35d42b5f@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The maple tree register cache is based on a much more modern data structure
than the rbtree cache and makes optimisation choices which are probably
more appropriate for modern systems than those made by the rbtree cache. In
v6.5 it has also acquired the ability to generate multi-register writes in
sync operations, bringing performance up to parity with the rbtree cache
there.
Update the adau1382 driver to use the more modern data structure.
Reviewed-by: Nuno Sa <nuno.sa@analog.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230713-asoc-ad-maple-v1-3-7d2f35d42b5f@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The maple tree register cache is based on a much more modern data structure
than the rbtree cache and makes optimisation choices which are probably
more appropriate for modern systems than those made by the rbtree cache. In
v6.5 it has also acquired the ability to generate multi-register writes in
sync operations, bringing performance up to parity with the rbtree cache
there.
Update the ad1980 driver to use the more modern data structure.
Reviewed-by: Nuno Sa <nuno.sa@analog.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230713-asoc-ad-maple-v1-2-7d2f35d42b5f@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The maple tree register cache is based on a much more modern data structure
than the rbtree cache and makes optimisation choices which are probably
more appropriate for modern systems than those made by the rbtree cache. In
v6.5 it has also acquired the ability to generate multi-register writes in
sync operations, bringing performance up to parity with the rbtree cache
there.
Update the ad1836 driver to use the more modern data structure.
Reviewed-by: Nuno Sa <nuno.sa@analog.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230713-asoc-ad-maple-v1-1-7d2f35d42b5f@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
This configuration supports JSL boards which implement ALC5650 dual
I2S interface codec. Two DAI links are added: AIF1 (on codec side) for
headphone and AIF2 for speakers.
Signed-off-by: Brent Lu <brent.lu@intel.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20230712191423.443765-1-brent.lu@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Uwe Kleine-König <u.kleine-koenig@pengutronix.de>:
Two more drivers were added during the current merge window that
are users of the original .remove callback that I plan to get rid of.
Convert them to .remove_new.
Merge series from Andy Shevchenko <andriy.shevchenko@linux.intel.com>:
The code can be simplified with refactored GPIO parts and with use of
device_get_match_data(). Besides that couple of additional changes,
one for maintenance and one for making IRQ domain agnostic (not being
pinned to OF).
Merge series from Syed Saba Kareem <Syed.SabaKareem@amd.com>:
This patch series to refactor acp leagacy driver and add pm ops
support for rembrandt platforms.
Merge series from Venkata Prasad Potturu <venkataprasad.potturu@amd.com>:
This patch series is to add acpi machine id's for vangogh platform
and add new dmi entries and machine driver support for nau8821 and
max98388 codecs.
Merge series from Trevor Wu <trevor.wu@mediatek.com>:
This series introduces support for memory-region, allowing afe memif to
utilize the region specified in dts.
Merge series from Cristian Ciocaltea <cristian.ciocaltea@collabora.com>:
This patch series extends the Vangogh machine driver to support a variant
based on the Nuvoton NAU88L21 Codec and the Analog Devices MAX98388
Speaker Amplifier.
Merge series from Cezary Rojewski <cezary.rojewski@intel.com>:
Series adds support for two boards: es8336 and rt5663. The former is
utilized by some KBL-based tablets whereas the latter unlocks
Chromebooks with rt5663 i2c codecs.
As existing implementation of es8336 (es8316.c) codec driver is not
prepared to cope with KBL-based platforms, couple of small,
clock-related changes precede anything avs-driver related.
The tail of patchset cleans up existing implementation of rt5682.
Merge series from Andy Shevchenko <andriy.shevchenko@linux.intel.com>:
The first three patches moves intlog10() to be available in entire
kernel. The last one removes copy of it in one driver. Besides already
good Lines of Code (LoC) statistics the upcoming users, if any, can
utilize the exported functions.
The series can be routed via ASoC tree (as Mauro suggested).
Note, int_log.h is separated from math.h due to licensing.
I dunno if we can mix two in a single header file. In any
case we may do it later on.
Merge series from Herve Codina <herve.codina@bootlin.com>:
Several weeks ago, I sent a series [1] for adding a potentiometer as an
auxiliary device in ASoC. The feedback was that the potentiometer should
be directly handled in IIO (as other potentiometers) and something more
generic should be present in ASoC in order to have a binding to import
some IIO devices into sound cards.
The series related to the IIO potentiometer device is already applied.
This series introduces audio-iio-aux. Its goal is to offer the binding
between IIO and ASoC.
It exposes attached IIO devices as ASoC auxiliary devices and allows to
control them through mixer controls.
On my system, the IIO device is a potentiometer and it is present in an
amplifier design present in the audio path.
Depending on hardware implementaion of DWC I2S controller may support
TDM mode if enabled in SoC at design time.
Unfortunately there is no way to detect TDM capability for DWC by
reading registers. Anyway, if such capability enabled, TDM mode
can be enabled and configured by dai-tdm-slot-* DT options.
Signed-off-by: Maxim Kochetkov <fido_max@inbox.ru>
Link: https://lore.kernel.org/r/20230622200031.120168-1-fido_max@inbox.ru
Signed-off-by: Mark Brown <broonie@kernel.org>
dlc->of_node will be set on snd_soc_get_dlc(), but we want
1) protect it by mutex, 2) set only when successed.
This patch do it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/878rc1kerv.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Different PCM devices may have different PCM hardware parameters. It
requires PCM hardware parameters set separately if there is more than
one rpmsg sound card.
Signed-off-by: Chancel Liu <chancel.liu@nxp.com>
Acked-by: Shengjiu Wang <shengjiu.wang@gmail.com>
Link: https://lore.kernel.org/r/20230625065412.651870-1-chancel.liu@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Required CPU/Codec/Platform dlc (snd_soc_dai_link_component) are similar
but not same, and very complex. Current implementation is very confusable
and it will be more complex if multi Component was supported.
This patch cleanup it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87o7l9blsn.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Current snd_soc_get_dai_id() is initializing dlc *manually*,
but it will might be a problem if dlc had new extra parameter.
This patch uses default initialization, otherwise, non initialized
part will be strange value.
This is prepare for multi Component support.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87pm5pblst.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
An additional-devs subnode can be present in the simple-card top node.
This subnode is used to declared some "virtual" additional devices.
Create related devices from this subnode and avoid this subnode presence
to interfere with the already supported subnodes analysis.
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Link: https://lore.kernel.org/r/20230623085830.749991-14-herve.codina@bootlin.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Industrial I/O devices can be present in the audio path.
These devices needs to be used as audio components in order to be
fully integrated in the audio path.
This support allows to consider these Industrial I/O devices as
auxiliary audio devices and allows one to control them using mixer
controls.
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Link: https://lore.kernel.org/r/20230623085830.749991-13-herve.codina@bootlin.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add acpi machine id's for vangogh platform and configure
driver data to enable SOF sound card support on newer boards.
Signed-off-by: Venkata Prasad Potturu <venkataprasad.potturu@amd.com>
Link: https://lore.kernel.org/r/20230707120730.1948445-4-venkataprasad.potturu@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Extend the Vangogh machine driver to support a variant based on the
Nuvoton NAU88L21 Codec and the Analog Devices MAX98388 Speaker
Amplifier.
Additionally, enable probing via ACPI match table for this and future
hardware revisions.
Co-developed-by: Lucas Tanure <lucas.tanure@collabora.com>
Signed-off-by: Lucas Tanure <lucas.tanure@collabora.com>
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Link: https://lore.kernel.org/r/20230705214800.193244-4-cristian.ciocaltea@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
In preparation for supporting ACPI probing, move DMI quirk handling
logic at the probe's top, to be able to return as quickly as possible in
case there is no DMI matching.
Additionally, simplify the code by replacing dmi_check_system() and
related callback with dmi_first_match(). While at it, also drop a few
unnecessary empty lines.
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Link: https://lore.kernel.org/r/20230705214800.193244-3-cristian.ciocaltea@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The "acp5x_mach" string is provided for both driver name and
MODULE_ALIAS. Since they need to match, ensure DRV_NAME macro is used in
both locations.
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Link: https://lore.kernel.org/r/20230705214800.193244-2-cristian.ciocaltea@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Export config_acp_dma() and config_pte_for_stream() functions.
These functions will be used to restore stream configuration during
system level resume.
Signed-off-by: Syed Saba Kareem <Syed.SabaKareem@amd.com>
Link: https://lore.kernel.org/r/20230626135515.1252063-8-Syed.SabaKareem@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Store the 'xfer_resolution' of the stream in private data structure,
it will be used to reprogram the xfer_resolution for the active stream
during system level resume.
Signed-off-by: Syed Saba Kareem <Syed.SabaKareem@amd.com>
Link: https://lore.kernel.org/r/20230626135515.1252063-7-Syed.SabaKareem@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Store the platform device reference created in pci driver,
it will be used in restoring the interrupts during system level resume.
Signed-off-by: Syed Saba Kareem <Syed.SabaKareem@amd.com>
Link: https://lore.kernel.org/r/20230626135515.1252063-5-Syed.SabaKareem@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Instead of having individual acp enable/disable interrupts functions for
each platform, implement common place holder to handle the same for all
AMD platforms.
Signed-off-by: Syed Saba Kareem <Syed.SabaKareem@amd.com>
Link: https://lore.kernel.org/r/20230626135515.1252063-4-Syed.SabaKareem@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add acp i2s master clock generation logic for rembrandt platform.
Signed-off-by: V Sujith Kumar Reddy <vsujithkumar.reddy@amd.com>
Signed-off-by: Syed Saba Kareem <Syed.SabaKareem@amd.com>
Link: https://lore.kernel.org/r/20230626135515.1252063-3-Syed.SabaKareem@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Remove the individual acp init and de-init functions from different
variants of acp pci driver(for renoir/rembrandt platforms) and use a
common file to define callbacks and refactor the callbacks to support
existing platforms.
Signed-off-by: Syed Saba Kareem <Syed.SabaKareem@amd.com>
Link: https://lore.kernel.org/r/20230626135515.1252063-2-Syed.SabaKareem@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
In certain projects, it is necessary to utilize the reserved memory
region for audio dma. The patch takes into account the dts property
'memory-region', allowing for the specification of memory for afe memif
through device tree.
Signed-off-by: Trevor Wu <trevor.wu@mediatek.com>
Link: https://lore.kernel.org/r/20230629074348.21670-2-trevor.wu@mediatek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
To improve readability, reword several local variables to better match
their counterparts in declarations of soc-dai.h. For similar reasons,
wording for few comments is streamlined while redundant comments are
removed.
No functional changes.
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20230629112449.1755928-9-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Align with what's done for all other boards and allocate jacks pins
dynamically and explicitly specify ->dai_fmt for the DAI link.
The latter clears any ambiguity - given the current implementation
of the codec driver, specifying format is optional but should the
implementation change, the sound card behaviour may be undesired.
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20230629112449.1755928-8-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Update board-selection tables to account for rt5663 on KBL-based
platforms.
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20230629112449.1755928-7-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Codec supports words that are 16/18/20/24/32 bits long. In case of 24,
it should be treated as 24/24 not 24/32 i.e.: 24 valid bit-depth in 24
bit-depth container.
For compatibility reasons, S24_LE is left as is.
Cc: Zhu Ning <zhuning@everest-semi.com>
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20230629112449.1755928-3-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
MCLK operates on 24MHz on Intel KabyLake-based platforms. To support
that frequency add new MCLK-LRCK ratio.
While at it, utilize ARRAY_SIZE rather than hardcode to improve
robustness.
Cc: Zhu Ning <zhuning@everest-semi.com>
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20230629112449.1755928-2-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new() which already returns void. Eventually after all drivers
are converted, .remove_new() is renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20230707072830.3395789-3-u.kleine-koenig@pengutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new() which already returns void. Eventually after all drivers
are converted, .remove_new() is renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20230707072830.3395789-2-u.kleine-koenig@pengutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>
After compiler complains:
sound/soc/codecs/rt5677.c:4748:30: warning: dubious: x | !y
I looked into the code and realized that we can refactor it
for better reading and fixing above issue at the same time.
Hence this change. It does not imply any functional changes.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20230630172155.83754-2-andriy.shevchenko@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
On Pink Sardine machines that don't have SdW controllers in use, the property
`mipi-sdw-manager-list` won't exist. There is no point in showing an error
to a user when this situation is encountered.
Furthermore if the machine doesn't have a DMIC connected to the ACP, there
may be no platform devices created either.
Downgrade the associated message to debug.
Fixes: d1351c30ac ("ASoC: amd: ps: create platform devices based on acp config")
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/20230708025208.54272-1-mario.limonciello@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This reverts commit ff87d619ac.
Andreas reports that on an i.MX8MP-based system where MCLK needs to be
used as an input, the MCLK pin is actually an output, despite not having
the 'fsl,sai-mclk-direction-output' property present in the devicetree.
This is caused by commit ff87d619ac ("ASoC: fsl_sai: Enable
MCTL_MCLK_EN bit for master mode") that sets FSL_SAI_MCTL_MCLK_EN
unconditionally for imx8mm/8mn/8mp/93, causing the MCLK to always
be configured as output.
FSL_SAI_MCTL_MCLK_EN corresponds to the MOE (MCLK Output Enable) bit
of register MCR and the drivers sets it when the
'fsl,sai-mclk-direction-output' devicetree property is present.
Revert the commit to allow SAI to use MCLK as input as well.
Cc: stable@vger.kernel.org
Fixes: ff87d619ac ("ASoC: fsl_sai: Enable MCTL_MCLK_EN bit for master mode")
Reported-by: Andreas Henriksson <andreas@fatal.se>
Signed-off-by: Fabio Estevam <festevam@denx.de>
Acked-by: Shengjiu Wang <shengjiu.wang@gmail.com>
Link: https://lore.kernel.org/r/20230706221827.1938990-1-festevam@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Johan Hovold <johan+linaro@kernel.org>:
I've been hitting a race during boot which breaks probe of the sound
card on the Lenovo ThinkPad X13s as I've previously reported here:
https://lore.kernel.org/all/ZIHMMFtuDtvdpFAZ@hovoldconsulting.com/
The immediate issue appeared to be a probe deferral that was turned into
a hard failure, but addressing that in itself only made things worse as
it exposed further bugs.
I was hoping someone more familiar with the code in question would look
into this, but as this affects users of the X13s and breaks audio on my
machine every fifth boot or so, I decided to investigate it myself.
As expected, the Qualcomm codec drivers are broken and specifically leak
resources on component remove, which in turn breaks sound card probe
deferrals.
The source of the deferral itself appears to be legitimate and was
simply due to some audio component not yet having been registered due to
random changes in timing during boot.
These issues can most easily be reproduced by simply blacklisting the
q6apm_dai module and loading it manually after boot.
Included are also two patches that suppresses error messages on
component probe deferral to avoid spamming the logs during boot.
If CONFIG_SND_SOC_WCD934X=y, CONFIG_COMPILE_TEST=y,
CONFIG_MFD_WCD934X=n, CONFIG_REGMAP_IRQ=n:
aarch64-linux-gnu-ld: sound/soc/codecs/wcd934x.o: in function `wcd934x_codec_probe':
wcd934x.c:(.text+0x33cc): undefined reference to `regmap_irq_get_virq'
aarch64-linux-gnu-ld: sound/soc/codecs/wcd934x.o: in function `wcd934x_comp_probe':
wcd934x.c:(.text+0x4cb0): undefined reference to `regmap_irq_get_virq'
aarch64-linux-gnu-ld: wcd934x.c:(.text+0x4cc0): undefined reference to `regmap_irq_get_virq'
aarch64-linux-gnu-ld: wcd934x.c:(.text+0x4cd0): undefined reference to `regmap_irq_get_virq'
aarch64-linux-gnu-ld: wcd934x.c:(.text+0x4ce0): undefined reference to `regmap_irq_get_virq'
aarch64-linux-gnu-ld: sound/soc/codecs/wcd934x.o:wcd934x.c:(.text+0x4cf0): more undefined references to `regmap_irq_get_virq' follow
Fix this by making SND_SOC_WCD934X select REGMAP_IRQ.
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Link: https://lore.kernel.org/r/cafd878747e7951914a7d9fea33788a4a230d1f0.1688643442.git.geert@linux-m68k.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Closing GPR port before graph close can result in un handled notifications
from DSP, this results in spam of errors from GPR driver as there is no
one to handle these notification at that point in time.
Fix this by closing GPR port after graph close is finished.
Fixes: 5477518b8a ("ASoC: qdsp6: audioreach: add q6apm support")
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20230705131842.41584-1-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Suppress probe deferral error messages when probing link components to
avoid spamming the logs, for example, if a required component has not
yet been registered:
snd-sc8280xp sound: ASoC: failed to instantiate card -517
Note that dev_err_probe() is not used as the card can be unbound and
rebound while the underlying platform device remains bound to its
driver.
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20230705123018.30903-9-johan+linaro@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Suppress probe deferral error messages when loading topologies and
creating frontend links to avoid spamming the logs when a component has
not yet been registered:
snd-sc8280xp sound: ASoC: adding FE link failed
snd-sc8280xp sound: ASoC: topology: could not load header: -517
Note that dev_err_probe() is not used as the topology component can be
probed and removed while the underlying platform device remains bound to
its driver.
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20230705123018.30903-8-johan+linaro@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The MBHC resources must be released on component probe failure and
removal so can not be tied to the lifetime of the component device.
This is specifically needed to allow probe deferrals of the sound card
which otherwise fails when reprobing the codec component:
snd-sc8280xp sound: ASoC: failed to instantiate card -517
genirq: Flags mismatch irq 299. 00002001 (mbhc sw intr) vs. 00002001 (mbhc sw intr)
wcd938x_codec audio-codec: Failed to request mbhc interrupts -16
wcd938x_codec audio-codec: mbhc initialization failed
wcd938x_codec audio-codec: ASoC: error at snd_soc_component_probe on audio-codec: -16
snd-sc8280xp sound: ASoC: failed to instantiate card -16
Fixes: 0e5c9e7ff8 ("ASoC: codecs: wcd: add multi button Headset detection support")
Cc: stable@vger.kernel.org # 5.14
Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20230705123018.30903-7-johan+linaro@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Make sure to release allocated MBHC resources also on component remove.
This is specifically needed to allow probe deferrals of the sound card
which otherwise fails when reprobing the codec component.
Fixes: 9fb9b1690f ("ASoC: codecs: wcd934x: add mbhc support")
Cc: stable@vger.kernel.org # 5.14
Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20230705123018.30903-6-johan+linaro@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Allocation of the clash control structure may fail so add the missing
error handling to avoid dereferencing an error pointer.
Fixes: 8d78602aa8 ("ASoC: codecs: wcd938x: add basic driver")
Cc: stable@vger.kernel.org # 5.14
Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20230705123018.30903-4-johan+linaro@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Propagate errors when failing to load the topology component so that
probe deferrals can be handled.
Fixes: 36ad9bf1d9 ("ASoC: qdsp6: audioreach: add topology support")
Cc: stable@vger.kernel.org # 5.17
Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20230705123018.30903-3-johan+linaro@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
dB range for HPHL and HPHR gains are from +6dB to -30dB in steps of
1.5dB with register values range from 0 to 24.
Current code maps these dB ranges incorrectly, fix them to allow proper
volume setting.
Fixes: e8ba1e05bd ("ASoC: codecs: wcd938x: add basic controls")
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20230705125723.40464-1-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
With recent changes to add more display ports did not change the Stream
name in q6afe-dai. This results in below error
"ASoC: Failed to add route DISPLAY_PORT_RX -> Display Port Playback(*)"
and sound card fails to probe.
Fix this by adding correct stream name.
Fixes: 90848a2557 ("ASoC: qcom: q6dsp: add support to more display ports")
Reported-by: Amit Pundir <amit.pundir@linaro.org>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20230705124850.40069-1-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
If the I2C controller encounters some problems like timed-out, the codec
driver will report the error code for the first read.
Signed-off-by: Shuming Fan <shumingf@realtek.com>
Link: https://lore.kernel.org/r/20230705042915.24932-1-shumingf@realtek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
After commit 6085f9e6dc ("ASoC: cs35l45: IRQ support"), without any
other configuration that selects CONFIG_REGMAP_IRQ, modpost errors out
with:
ERROR: modpost: "regmap_irq_get_virq" [sound/soc/codecs/snd-soc-cs35l45.ko] undefined!
ERROR: modpost: "devm_regmap_add_irq_chip" [sound/soc/codecs/snd-soc-cs35l45.ko] undefined!
Add the Kconfig selection to ensure these functions get built and
included, which resolves the build failure.
Cc: stable@vger.kernel.org
Fixes: 6085f9e6dc ("ASoC: cs35l45: IRQ support")
Reported-by: Marcus Seyfarth <m.seyfarth@gmail.com>
Closes: https://github.com/ClangBuiltLinux/linux/issues/1882
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Link: https://lore.kernel.org/r/20230703-cs35l45-select-regmap_irq-v1-1-37d7e838b614@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Make sure that the soundwire device used for register accesses has been
enumerated and initialised before trying to read the codec variant
during component probe.
This specifically avoids interpreting (a masked and shifted) -EBUSY
errno as the variant:
wcd938x_codec audio-codec: ASoC: error at soc_component_read_no_lock on audio-codec for register: [0x000034b0] -16
in case the soundwire device has not yet been initialised, which in turn
prevents some headphone controls from being registered.
Fixes: 8d78602aa8 ("ASoC: codecs: wcd938x: add basic driver")
Cc: stable@vger.kernel.org # 5.14
Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reported-by: Steev Klimaszewski <steev@kali.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Tested-by: Steev Klimaszewski <steev@kali.org>
Link: https://lore.kernel.org/r/20230701094723.29379-1-johan+linaro@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Johan Hovold <johan+linaro@kernel.org>:
When investigating a race in the wcd938x driver I noticed that the MBHC
impedance measurements where printed at error loglevel which is clearly
wrong.
Fix that, and clean up the logging somewhat by using dev_printk() and
addressing some style issues.
Included are also two patches that drop the bogus inline keywords from
the functions involved.
The compiler is generally better at deciding what functions should be
inlined than driver authors are.
Drop the bogus inline keyword from two functions that were neither very
small or used in a single place.
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20230630142717.5314-6-johan+linaro@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Demote the MBHC impedance measurement printk, which is only needed
for development and debugging, to debug level.
While at it, fix the capitalisation of "ohm" and add the missing space
before the opening parenthesis.
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20230630142717.5314-5-johan+linaro@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Pass the component structure also to the
wcd938x_mbhc_get_result_params() helper so that the component device can
be used for logging consistently.
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20230630142717.5314-4-johan+linaro@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The compiler is generally better at deciding what functions should be
inlined than driver authors are.
Drop the bogus inline keyword from two functions that were neither very
small or used in a single place.
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20230630142717.5314-3-johan+linaro@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Demote the MBHC impedance measurement printk, which is not an error
message, from error to debug level.
While at it, fix the capitalisation of "ohm" and add the missing space
before the opening parenthesis.
Fixes: bcee7ed09b ("ASoC: codecs: wcd938x: add Multi Button Headset Control support")
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20230630142717.5314-2-johan+linaro@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
For some reason we ended up with a setup without this flag.
This resulted in inconsistent sound card devices numbers which
are also not starting as expected at dai_link->id.
(Ex: MultiMedia1 pcm ended up with device number 4 instead of 0)
With this patch patch now the MultiMedia1 PCM ends up with device number 0
as expected.
[This is causing unstable numbering in userspace as other changes go in,
which in turn gets noticed by some userspace. There's been multiple
values so we can't simply pick one and revert to it. Do not backport
since it will introduce a change. -- broonie]
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20230628092404.13927-1-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Make sure to resume the codec and soundwire device before trying to read
the codec variant and configure the device during component probe.
This specifically avoids interpreting (a masked and shifted) -EBUSY
errno as the variant:
wcd938x_codec audio-codec: ASoC: error at soc_component_read_no_lock on audio-codec for register: [0x000034b0] -16
when the soundwire device happens to be suspended, which in turn
prevents some headphone controls from being registered.
Fixes: 8d78602aa8 ("ASoC: codecs: wcd938x: add basic driver")
Cc: stable@vger.kernel.org # 5.14
Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reported-by: Steev Klimaszewski <steev@kali.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20230630120318.6571-1-johan+linaro@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
ACP driver should send SHA DMA completion command to PSP module for RN
platform only.
Add a revision check for RN platform.
Signed-off-by: Mastan Katragadda <Mastan.Katragadda@amd.com>
Link: https://lore.kernel.org/r/20230630070544.2167421-1-Mastan.Katragadda@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Lots of changes as usual, but the only significant stuff in ALSA core
part is the MIDI 2.0 support, while ASoC core kept receiving the code
refactoring. The majority of changes are seen rather in device
drivers, and quite a few new drivers can be found there.
Here we go, some highlights:
ALSA and ASoC Core:
- Support of MIDI 2.0 devices: rawmidi and sequencer API have been
extended for the support of the new UMP (Universal MIDI Packet)
protocol, USB audio driver got the USB MIDI 2.0 interface support
- Continued refactoring around ASoC DAI links and the ordering of
trigger callbacks
- PCM ABI extension for better drain support
ASoC Drivers:
- Conversions of many drivers to use maple tree based caches
- Everlasting improvement works on ASoC Intel drivers
- Compressed audio support for Qualcomm
- Support for AMD SoundWire, Analog Devices SSM3515, Google Chameleon,
Ingenic X1000, Intel systems with various CODECs, Loongson
platforms, Maxim MAX98388, Mediatek MT8188, Nuvoton NAU8825C, NXP
platforms with NAU8822, Qualcomm WSA884x, StarFive JH7110, Texas
Instruments TAS2781
HD-audio:
- Quirks for HP and ASUS machines
- CS35L41 HD-audio codec fixes
- Loongson HD-audio support
Misc:
- A new virtual PCM test driver for kselftests
- Continued refactoring and improvements on the legacy emu10k1 driver
-----BEGIN PGP SIGNATURE-----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=GuXv
-----END PGP SIGNATURE-----
Merge tag 'sound-6.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound updates from Takashi Iwai:
"Lots of changes as usual, but the only significant stuff in ALSA core
part is the MIDI 2.0 support, while ASoC core kept receiving the code
refactoring. The majority of changes are seen rather in device
drivers, and quite a few new drivers can be found there.
Here we go, some highlights:
ALSA and ASoC Core:
- Support of MIDI 2.0 devices: rawmidi and sequencer API have been
extended for the support of the new UMP (Universal MIDI Packet)
protocol, USB audio driver got the USB MIDI 2.0 interface support
- Continued refactoring around ASoC DAI links and the ordering of
trigger callbacks
- PCM ABI extension for better drain support
ASoC Drivers:
- Conversions of many drivers to use maple tree based caches
- Everlasting improvement works on ASoC Intel drivers
- Compressed audio support for Qualcomm
- Support for AMD SoundWire, Analog Devices SSM3515, Google
Chameleon, Ingenic X1000, Intel systems with various CODECs,
Loongson platforms, Maxim MAX98388, Mediatek MT8188, Nuvoton
NAU8825C, NXP platforms with NAU8822, Qualcomm WSA884x, StarFive
JH7110, Texas Instruments TAS2781
HD-audio:
- Quirks for HP and ASUS machines
- CS35L41 HD-audio codec fixes
- Loongson HD-audio support
Misc:
- A new virtual PCM test driver for kselftests
- Continued refactoring and improvements on the legacy emu10k1
driver"
* tag 'sound-6.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (556 commits)
ALSA: hda/realtek: Enable mute/micmute LEDs and limit mic boost on EliteBook
ASoC: hdmi-codec: fix channel info for compressed formats
ALSA: pcm: fix ELD constraints for (E)AC3, DTS(-HD) and MLP formats
ASoC: core: Always store of_node when getting DAI link component
ASoC: tas2781: Fix error code in tas2781_load_calibration()
ASoC: amd: update pm_runtime enable sequence
ALSA: ump: Export MIDI1 / UMP conversion helpers
ASoC: tas2781: fix Kconfig dependencies
ASoC: amd: acp: remove acp poweroff function
ASoC: amd: acp: clear pdm dma interrupt mask
ASoC: codecs: max98090: Allow dsp_a mode
ASoC: qcom: common: add default jack dapm pins
ASoC: loongson: fix address space confusion
ASoC: dt-bindings: microchip,sama7g5-pdmc: Simplify "microchip,mic-pos" constraints
ASoC: tegra: Remove stale comments in AHUB
ASoC: tegra: Use normal system sleep for ASRC
ALSA: hda/realtek: Add quirks for ROG ALLY CS35l41 audio
ASoC: fsl-asoc-card: Allow passing the number of slots in use
ASoC: codecs: wsa884x: Add WSA884x family of speakers
ASoC: dt-bindings: qcom,wsa8840: Add WSA884x family of speakers
...
SoC support. Instead there's a treewide patch series from Maxime that makes
clk_ops::determine_rate mandatory for muxes. Beyond that core framework change
we have the usual pile of clk driver updates such as migrating i2c drivers to
use .probe() again or YAMLfication of clk DT bindings so we can validate DTBs.
Overall the SoCs that got the most updates this time around in terms of
diffstat are the Amlogic and Mediatek drivers because they added new SoC
support or fixed up various drivers to have proper data.
In general things look kinda quiet. I suspect the core framework change may
still shake out some problems after the merge window, mostly because not
everyone tests linux-next where that series has been for some number of weeks.
I saw that there's at least one pending fix for Tegra that needs to be wrapped
up into a proper patch. I'll try to catch those bits before the window closes
so that -rc1 is bootable. More details below.
Core:
- Make clk_ops::determine_rate mandatory for muxes
New Drivers:
- Add amlogic a1 SoC family PLL and peripheral clock controller support
Updates:
- Handle allocation failures from kasprintf() and friends
- Migrate platform clk drivers to .remove_new()
- Migrate i2c clk drivers to .probe() instead of .probe_new()
- Remove CLK_SET_PARENT from all Mediatek MSDC core clocks
- Add infra_ao reset support for Mediatek MT8188 SoCs
- Align driver_data to i2c_device_id tables in some i2c clk drivers
- Use device_get_match_data() in vc5 clk driver
- New Kconfig symbol name (SOC_MICROCHIP_POLARFIRE) for Microchip FPGA clock
drivers
- Use of_property_read_bool() to read "microchip,pic32mzda-sosc" boolean DT
property in clk-pic32mzda
- Convert AT91 clock dt-bindings to YAML
- Remove CLK_SET_RATE_PARENT flag from LDB clocks on i.MX6SX
- Keep i.MX UART clocks enabled during kernel boot if earlycon is set
- Drop imx_unregister_clocks() as there are no users anymore
- Switch to _safe iterator on imx_clk_scu_unregister() to avoid use after free
- Add determine_rate op to the imx8m composite clock
- Use device managed API for iomap and kzalloc for i.MXRT1050, i.MX8MN,
i.MX8MP and i.MX93 clock controller drivers
- Add missing interrupt DT property for the i.MX8M clock controller
- Re-add support for Exynos4212 clock controller because we are
re-introducing the SoC in the mainline
- Add CONFIG_OF dependency to Samsung clk Kconfig symbols to solve some
objtool warnings
- Preselect PLL MIPI as TCON0 parent for Allwinner A64 SoC
- Convert the Renesas clock drivers to readl_poll_timeout_atomic()
- Add PWM clock on Renesas R-Car V3U
- Fix PLL5 on Renesas RZ/G2L and RZ/V2L
-----BEGIN PGP SIGNATURE-----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=6M8D
-----END PGP SIGNATURE-----
Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk updates from Stephen Boyd:
"This batch of clk driver updates contains almost no new SoC support.
Instead there's a treewide patch series from Maxime that makes
clk_ops::determine_rate mandatory for muxes.
Beyond that core framework change we have the usual pile of clk driver
updates such as migrating i2c drivers to use .probe() again or
YAMLfication of clk DT bindings so we can validate DTBs.
Overall the SoCs that got the most updates this time around in terms
of diffstat are the Amlogic and Mediatek drivers because they added
new SoC support or fixed up various drivers to have proper data.
In general things look kinda quiet. I suspect the core framework
change may still shake out some problems after the merge window,
mostly because not everyone tests linux-next where that series has
been for some number of weeks. I saw that there's at least one pending
fix for Tegra that needs to be wrapped up into a proper patch. I'll
try to catch those bits before the window closes so that -rc1 is
bootable. More details below.
Core:
- Make clk_ops::determine_rate mandatory for muxes
New Drivers:
- Add amlogic a1 SoC family PLL and peripheral clock controller support
Updates:
- Handle allocation failures from kasprintf() and friends
- Migrate platform clk drivers to .remove_new()
- Migrate i2c clk drivers to .probe() instead of .probe_new()
- Remove CLK_SET_PARENT from all Mediatek MSDC core clocks
- Add infra_ao reset support for Mediatek MT8188 SoCs
- Align driver_data to i2c_device_id tables in some i2c clk drivers
- Use device_get_match_data() in vc5 clk driver
- New Kconfig symbol name (SOC_MICROCHIP_POLARFIRE) for Microchip
FPGA clock drivers
- Use of_property_read_bool() to read "microchip,pic32mzda-sosc"
boolean DT property in clk-pic32mzda
- Convert AT91 clock dt-bindings to YAML
- Remove CLK_SET_RATE_PARENT flag from LDB clocks on i.MX6SX
- Keep i.MX UART clocks enabled during kernel boot if earlycon is set
- Drop imx_unregister_clocks() as there are no users anymore
- Switch to _safe iterator on imx_clk_scu_unregister() to avoid use
after free
- Add determine_rate op to the imx8m composite clock
- Use device managed API for iomap and kzalloc for i.MXRT1050,
i.MX8MN, i.MX8MP and i.MX93 clock controller drivers
- Add missing interrupt DT property for the i.MX8M clock controller
- Re-add support for Exynos4212 clock controller because we are
re-introducing the SoC in the mainline
- Add CONFIG_OF dependency to Samsung clk Kconfig symbols to solve
some objtool warnings
- Preselect PLL MIPI as TCON0 parent for Allwinner A64 SoC
- Convert the Renesas clock drivers to readl_poll_timeout_atomic()
- Add PWM clock on Renesas R-Car V3U
- Fix PLL5 on Renesas RZ/G2L and RZ/V2L"
* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (149 commits)
clk: fix typo in clk_hw_register_fixed_rate_parent_data() macro
clk: Fix memory leak in devm_clk_notifier_register()
clk: mvebu: Iterate over possible CPUs instead of DT CPU nodes
clk: mvebu: Use of_get_cpu_hwid() to read CPU ID
MAINTAINERS: Add Marvell mvebu clock drivers
clk: clocking-wizard: check return value of devm_kasprintf()
clk: ti: clkctrl: check return value of kasprintf()
clk: keystone: sci-clk: check return value of kasprintf()
clk: si5341: free unused memory on probe failure
clk: si5341: check return value of {devm_}kasprintf()
clk: si5341: return error if one synth clock registration fails
clk: cdce925: check return value of kasprintf()
clk: vc5: check memory returned by kasprintf()
clk: mediatek: clk-mt8173-apmixedsys: Fix iomap not released issue
clk: mediatek: clk-mt8173-apmixedsys: Fix return value for of_iomap() error
clk: mediatek: clk-mtk: Grab iomem pointer for divider clocks
clk: keystone: syscon-clk: Add support for audio refclk
dt-bindings: clock: Add binding documentation for TI Audio REFCLK
dt-bindings: clock: ehrpwm: Remove unneeded syscon compatible
clk: keystone: syscon-clk: Allow the clock node to not be of type syscon
...
Following prints are observed while testing audio on Jetson AGX Orin which
has onboard RT5640 audio codec:
BUG: sleeping function called from invalid context at kernel/workqueue.c:3027
in_atomic(): 1, irqs_disabled(): 128, non_block: 0, pid: 0, name: swapper/0
preempt_count: 10001, expected: 0
RCU nest depth: 0, expected: 0
------------[ cut here ]------------
WARNING: CPU: 0 PID: 0 at kernel/irq/handle.c:159 __handle_irq_event_percpu+0x1e0/0x270
---[ end trace ad1c64905aac14a6 ]-
The IRQ handler rt5640_irq() runs in interrupt context and can sleep
during cancel_delayed_work_sync().
Fix this by running IRQ handler, rt5640_irq(), in thread context.
Hence replace request_irq() calls with devm_request_threaded_irq().
Fixes: 051dade346 ("ASoC: rt5640: Fix the wrong state of JD1 and JD2")
Cc: stable@vger.kernel.org
Cc: Oder Chiou <oder_chiou@realtek.com>
Signed-off-by: Sameer Pujar <spujar@nvidia.com>
Link: https://lore.kernel.org/r/1688015537-31682-4-git-send-email-spujar@nvidia.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Byte mask for channel-1 of stream-1 is not getting enabled and this
causes failures during ADX use cases. This happens because the byte
map value 0 matches the byte map array and put() callback returns
without enabling the corresponding bits in the byte mask.
ADX supports 4 output streams and each stream can have a maximum of
16 channels. Each byte in the input frame is uniquely mapped to a
byte in one of these 4 outputs. This mapping is done with the help of
byte map array via user space control setting. The byte map array
size in the driver is 16 and each array element is of size 4 bytes.
This corresponds to 64 byte map values.
Each byte in the byte map array can have any value between 0 to 255
to enable the corresponding bits in the byte mask. The value 256 is
used as a way to disable the byte map. However the byte map array
element cannot store this value. The put() callback disables the byte
mask for 256 value and byte map value is reset to 0 for this case.
This causes problems during subsequent runs since put() callback,
for value of 0, just returns without enabling the byte mask. In short,
the problem is coming because 0 and 256 control values are stored as
0 in the byte map array.
Right now fix the put() callback by actually looking at the byte mask
array state to identify if any change is needed and update the fields
accordingly. The get() callback needs an update as well to return the
correct control value that user has set before. Note that when user
set 256, the value is stored as 0 and byte mask is disabled. So byte
mask state is used to either return 256 or the value from byte map
array.
Given above, this looks bit complicated and all this happens because
the byte map array is tightly packed and cannot actually store the 256
value. Right now the priority is to fix the existing failure and a TODO
item is put to improve this logic.
Fixes: 3c97881b8c ("ASoC: tegra: Fix kcontrol put callback in ADX")
Cc: stable@vger.kernel.org
Signed-off-by: Sheetal <sheetal@nvidia.com>
Reviewed-by: Mohan Kumar D <mkumard@nvidia.com>
Reviewed-by: Sameer Pujar <spujar@nvidia.com>
Link: https://lore.kernel.org/r/1688015537-31682-3-git-send-email-spujar@nvidia.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Byte mask for channel-1 of stream-1 is not getting enabled and this
causes failures during AMX use cases. This happens because the byte
map value 0 matches the byte map array and put() callback returns
without enabling the corresponding bits in the byte mask.
AMX supports 4 input streams and each stream can take a maximum of
16 channels. Each byte in the output frame is uniquely mapped to a
byte in one of these 4 inputs. This mapping is done with the help of
byte map array via user space control setting. The byte map array
size in the driver is 16 and each array element is of size 4 bytes.
This corresponds to 64 byte map values.
Each byte in the byte map array can have any value between 0 to 255
to enable the corresponding bits in the byte mask. The value 256 is
used as a way to disable the byte map. However the byte map array
element cannot store this value. The put() callback disables the byte
mask for 256 value and byte map value is reset to 0 for this case.
This causes problems during subsequent runs since put() callback,
for value of 0, just returns without enabling the byte mask. In short,
the problem is coming because 0 and 256 control values are stored as
0 in the byte map array.
Right now fix the put() callback by actually looking at the byte mask
array state to identify if any change is needed and update the fields
accordingly. The get() callback needs an update as well to return the
correct control value that user has set before. Note that when user
sets 256, the value is stored as 0 and byte mask is disabled. So byte
mask state is used to either return 256 or the value from byte map
array.
Given above, this looks bit complicated and all this happens because
the byte map array is tightly packed and cannot actually store the 256
value. Right now the priority is to fix the existing failure and a TODO
item is put to improve this logic.
Fixes: 8db78ace1b ("ASoC: tegra: Fix kcontrol put callback in AMX")
Cc: stable@vger.kernel.org
Signed-off-by: Sheetal <sheetal@nvidia.com>
Reviewed-by: Mohan Kumar D <mkumard@nvidia.com>
Reviewed-by: Sameer Pujar <spujar@nvidia.com>
Link: https://lore.kernel.org/r/1688015537-31682-2-git-send-email-spujar@nvidia.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This release is almost all drivers, there's some small improvements in
the core but otherwise everything is updates to drivers, mostly the
addition of new ones.
There's also a bunch of changes pulled in from the MFD subsystem as
dependencies, Rockchip and TI core MFD code that the regulator drivers
depend on.
I've also yet again managed to put a SPI commit in the regulator tree, I
don't know what it is about those two trees (this for spi-geni-qcom).
- Support for Renesas RAA215300, Rockchip RK808, Texas Instruments
TPS6594 and TPS6287x, and X-Powers AXP15060 and AXP313a
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmSZkRUACgkQJNaLcl1U
h9A0bAf+IM6F/vTF7R/2NTlR3M/Z7HGinxK1oit6LuZfKnveaRRCEWvBVoZzZpjs
CzdWTPBWA2jyETzEqmX7gxYnxf2aaLieLEpKRZSh3uQd5OKmrizQDs5/OdaVUViK
/ytmqd/IFgFfwaI+az38CQlTf+dDyuJDB0OwlkEkoaxWjeiAh6INBh6xO9aKczoW
lFd0tOVQt1EcBKdB4tBJLTFIWWsG66xy9NZ018FrcA+bCmQVBvkbqcahayI5Q6Kw
m5H7cZuFbKV51AlyYMF/C4Lwhy1mOT166eRmSrgxBXCsqhpFeHYkJQkmumNd3gkQ
oSQPTZHqSblJA7Utw09mlT6r/xqL0Q==
=/f85
-----END PGP SIGNATURE-----
Merge tag 'regulator-v6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator
Pull regulator updates from Mark Brown:
"This release is almost all drivers, there's some small improvements in
the core but otherwise everything is updates to drivers, mostly the
addition of new ones.
There's also a bunch of changes pulled in from the MFD subsystem as
dependencies, Rockchip and TI core MFD code that the regulator drivers
depend on.
I've also yet again managed to put a SPI commit in the regulator tree,
I don't know what it is about those two trees (this for
spi-geni-qcom).
Summary:
- Support for Renesas RAA215300, Rockchip RK808, Texas Instruments
TPS6594 and TPS6287x, and X-Powers AXP15060 and AXP313a"
* tag 'regulator-v6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: (43 commits)
regulator: Add Renesas PMIC RAA215300 driver
regulator: dt-bindings: Add Renesas RAA215300 PMIC bindings
regulator: ltc3676: Use maple tree register cache
regulator: ltc3589: Use maple tree register cache
regulator: helper: Document ramp_delay parameter of regulator_set_ramp_delay_regmap()
regulator: mt6358: Use linear voltage helpers for single range regulators
regulator: mt6358: Const-ify mt6358_regulator_info data structures
regulator: mt6358: Drop *_SSHUB regulators
regulator: mt6358: Merge VCN33_* regulators
regulator: dt-bindings: mt6358: Drop *_sshub regulators
regulator: dt-bindings: mt6358: Merge ldo_vcn33_* regulators
regulator: dt-bindings: pwm-regulator: Add missing type for "pwm-dutycycle-unit"
regulator: Switch two more i2c drivers back to use .probe()
spi: spi-geni-qcom: Do not do DMA map/unmap inside driver, use framework instead
soc: qcom: geni-se: Add interfaces geni_se_tx_init_dma() and geni_se_rx_init_dma()
regulator: tps6594-regulator: Add driver for TI TPS6594 regulators
regulator: axp20x: Add AXP15060 support
regulator: axp20x: Add support for AXP313a variant
dt-bindings: pfuze100.yaml: Add an entry for interrupts
regulator: stm32-pwr: Fix regulator disabling
...
A fairly quiet release from a core and framework point of view, but a
very big one from the point of view of new drivers:
- More refectoring from Morimoto-san, this time mainly around DAI
links and how we control the ordering of trigger() callbacks.
- Convert a lot of drivers to use maple tree based caches.
- Lots of work on the x86 driver stack.
- Compressed audio support for Qualcomm.
- Support for AMD SoundWire, Analog Devices SSM3515, Google Chameleon,
Ingenic X1000, Intel systems with various CODECs, Longsoon platforms,
Maxim MAX98388, Mediatek MT8188, Nuvoton NAU8825C, NXP platforms with
NAU8822, Qualcomm WSA884x, StarFive JH7110, Texas Instruments TAS2781.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmSZjIQACgkQJNaLcl1U
h9Dm0wf/X1q4n6KSXLvSyoSUxS/RWzWgyDDX7a4iLcFiov3ehHpVwzhwI/+1xSzs
SGhg6q2rud05SejFBh+2L7HMZfdXWSfW9ukaGz3UsCdqw3/7zAUFgY1RGtjZO4lA
eH50vEME9RbkIDgyxzYe9eViaKGh2fNxIbQ2d9hx6+nIVNfuuSikvGz4K/9PD0DN
2tBgzuIWwrPIbvMV2zHDCycmVG0lqScMWjIrdpDFxa63aPTr920YqYWSoQfOUR1s
j9zlZWnclTjrqRl1GZHxnM8N70vmutZWXAB1WFjal6mmMd6lUG71CyYHvA5h5D0V
ygNpn9B5REYlHBVzI43uT3nog+iS4Q==
=dbjW
-----END PGP SIGNATURE-----
Merge tag 'asoc-v6.5' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Updates for v6.5
A fairly quiet release from a core and framework point of view, but a
very big one from the point of view of new drivers:
- More refectoring from Morimoto-san, this time mainly around DAI
links and how we control the ordering of trigger() callbacks.
- Convert a lot of drivers to use maple tree based caches.
- Lots of work on the x86 driver stack.
- Compressed audio support for Qualcomm.
- Support for AMD SoundWire, Analog Devices SSM3515, Google Chameleon,
Ingenic X1000, Intel systems with various CODECs, Longsoon platforms,
Maxim MAX98388, Mediatek MT8188, Nuvoton NAU8825C, NXP platforms with
NAU8822, Qualcomm WSA884x, StarFive JH7110, Texas Instruments TAS2781.
For invalid dai id, instead of returning -EINVAL
return bytes count as zero in acp_get_byte_count() function.
Fixes: 623621a9f9 ("ASoC: amd: Add common framework to support I2S on ACP SOC")
Signed-off-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com>
Link: https://lore.kernel.org/r/20230626105356.2580125-6-Vijendar.Mukunda@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
acp_get_byte_count() function should return zero bytes instead of
-EINVAL for invalid SoundWire manager instance.
Fixes: f722917350 ("ASoC: amd: ps: add SoundWire dma driver dma ops")
Signed-off-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com>
Link: https://lore.kernel.org/r/20230626105356.2580125-5-Vijendar.Mukunda@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
For AUDIO0 RX stream, AUDIO0_RX position registers should be used.
DMA error is reported due to referring wrong position register set for
AUDIO0 RX stream.
Correct the position register set for AUDIO0 RX stream.
Fixes: f722917350 ("ASoC: amd: ps: add SoundWire dma driver dma ops")
Signed-off-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com>
Link: https://lore.kernel.org/r/20230626105356.2580125-3-Vijendar.Mukunda@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Correct the DMA irq mask macro to program DMA irq bits correctly for
SDW0 instance rx streams.
Fixes: 298d4f7b17 ("ASoC: amd: ps: add support for SoundWire DMA interrupts")
Signed-off-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com>
Link: https://lore.kernel.org/r/20230626105356.2580125-2-Vijendar.Mukunda@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add comments for DMA stream id and IRQ bit mapping in
ACP_EXTERNAL_CNTL & ACP_EXTERNAL_CNTL1 registers for
SDW0 and SDW1 manager instances.
Signed-off-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com>
Link: https://lore.kernel.org/r/20230626105356.2580125-1-Vijendar.Mukunda@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
According to CTA 861 the channel/speaker allocation info in the
audio infoframe only applies to uncompressed (PCM) audio streams.
The channel count info should indicate the number of channels
in the transmitted audio, which usually won't match the number of
channels used to transmit the compressed bitstream.
Some devices (eg some Sony TVs) will refuse to decode compressed
audio if these values are not set correctly.
To fix this we can simply set the channel count to 0 (which means
"refer to stream header") and set the channel/speaker allocation to 0
as well (which would mean stereo FL/FR for PCM, a safe value all sinks
will support) when transmitting compressed audio.
Signed-off-by: Matthias Reichl <hias@horus.com>
Link: https://lore.kernel.org/r/20230624165232.5751-1-hias@horus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
According to CTA 861 the channel/speaker allocation info in the
audio infoframe only applies to uncompressed (PCM) audio streams.
The channel count info should indicate the number of channels
in the transmitted audio, which usually won't match the number of
channels used to transmit the compressed bitstream.
Some devices (eg some Sony TVs) will refuse to decode compressed
audio if these values are not set correctly.
To fix this we can simply set the channel count to 0 (which means
"refer to stream header") and set the channel/speaker allocation to 0
as well (which would mean stereo FL/FR for PCM, a safe value all sinks
will support) when transmitting compressed audio.
Signed-off-by: Matthias Reichl <hias@horus.com>
Link: https://lore.kernel.org/r/20230624165232.5751-1-hias@horus.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Merge series from Biju Das <biju.das.jz@bp.renesas.com>:
This patch series aims to add support for Renesas PMIC RAA215300 and
built-in RTC found on this PMIC device.
The details of PMIC can be found here[1].
Renesas PMIC RAA215300 exposes two separate i2c devices, one for the main
device and another for rtc device.
The generic snd_soc_dai_get_dlc() contains a default translation function
for DAI names which has factored out common code in a number of card
drivers, resolving the dai_name and of_node either using a driver provided
translation function or with a generic implementation. Unfortunately the
of_node can't be set by the translation function since it currently doesn't
have an interface to do that but snd_soc_dai_get_dlc() only initialises the
of_node in the case where there is no translation function.
This breaks the Meson support after conversion to use the generic helpers
since the DPCM cards for it check which component of the SoC is connected
to each link by checking the compatible for the component and the Meson
components provide a custom operation so don't use the generic code.
Fix this and potentially other cards by unconditionally storing the node in
the dai_link_component, there shouldn't be a binding specific of_node
selected since that's how we determine the translation function.
Fixes: 2e1dbea1f8 ("ASoC: meson: use snd_soc_{of_}get_dlc()")
Fixes: 3c8b586185 ("ASoC: soc-core.c: add index on snd_soc_of_get_dai_name()")
Link: https://lore.kernel.org/r/Message-Id: <20230623-asoc-fix-meson-probe-v1-1-82b2c2ec5ca4@kernel.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
Return -EINVAL instead of success on this error path.
Fixes: 915f5eadeb ("ASoC: tas2781: firmware lib")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://lore.kernel.org/r/Message-Id: <729bb6b3-bc1d-4b3d-8b65-077a492c753c@moroto.mountain>
Signed-off-by: Mark Brown <broonie@kernel.org>
pm_runtime_allow() is not needed for ACP child platform devices.
Replace pm_runtime_allow() with pm_runtime_mark_last_busy()
& pm_runtime_set_active() in pm_runtime enable sequence for
ACP child platform drivers.
Signed-off-by: Arun Gopal <arungopal.kondaveeti@amd.com>
Link: https://lore.kernel.org/r/Message-Id: <20230623214150.4058721-1-arungopal.kondaveeti@amd.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
The new driver has two modules that both get enabled for build testing
when all codecs are selected. The comlib part has an i2c dependency,
so this remains disabled on builds without i2c, but then the other
one fails to link:
ERROR: modpost: "tasdevice_dev_bulk_write" [sound/soc/codecs/snd-soc-tas2781-fmwlib.ko] undefined!
ERROR: modpost: "tasdevice_dev_update_bits" [sound/soc/codecs/snd-soc-tas2781-fmwlib.ko] undefined!
ERROR: modpost: "tasdevice_dev_bulk_read" [sound/soc/codecs/snd-soc-tas2781-fmwlib.ko] undefined!
ERROR: modpost: "tasdevice_dev_read" [sound/soc/codecs/snd-soc-tas2781-fmwlib.ko] undefined!
ERROR: modpost: "tasdevice_dev_write" [sound/soc/codecs/snd-soc-tas2781-fmwlib.ko] undefined!
There are many ways to address this, adding an explicit dependency seems
to be the clearest method that keeps the structure of the driver otherwise
unchanged.
Fixes: ef3bcde75d ("ASoC: tas2781: Add tas2781 driver")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/Message-Id: <20230622101205.3180938-1-arnd@kernel.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
BIOS invokes ACP Power off sequence based on ACP device state.
Remove redundant code from ACP PCI driver for ACP Power off sequence.
Signed-off-by: Syed Saba Kareem <Syed.SabaKareem@amd.com>
Link: https://lore.kernel.org/r/Message-Id: <20230622152406.3709231-4-Syed.SabaKareem@amd.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Clear pdm dma interrupt mask in acp_dmic_shutdown().
'Fixes: c32bd332ce ("ASoC: amd: acp: Add generic support for
PDM controller on ACP")'
Signed-off-by: Syed Saba Kareem <Syed.SabaKareem@amd.com>
Link: https://lore.kernel.org/r/Message-Id: <20230622152406.3709231-1-Syed.SabaKareem@amd.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
TDM mode for max98090 is dsp_a compatible with such limitations:
1) Up to four timeslots supported.
2) Only 16 bits timeslots supported.
3) Only 2 active timeslots (L/R) supported.
We want to setup TDM mode only when dsp_a mode is selected. So move
M98090_REG_TDM_FORMAT/M98090_REG_TDM_CONTROL registers setup from
max98090_set_tdm_slot() to the max98090_dai_set_fmt(). Also extend
max98090_set_tdm_slot() with all TDM limitations check.
Signed-off-by: Maxim Kochetkov <fido_max@inbox.ru>
Link: https://lore.kernel.org/r/Message-Id: <20230622142038.63388-1-fido_max@inbox.ru>
Signed-off-by: Mark Brown <broonie@kernel.org>
If the soundcard does not specify the dapm pins, let the common
code add these pins for jack.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Tested-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/Message-Id: <20230302120327.10823-1-srinivas.kandagatla@linaro.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
The i2s driver uses the mapped __iomem address of the FIFO as the DMA
address for the device. This apparently works on loongarch because of
the way it handles __iomem pointers as aliases of physical addresses,
but this is not portable to other architectures and causes a compiler
warning when dma addresses are not the same size as pointers:
sound/soc/loongson/loongson_i2s_pci.c: In function 'loongson_i2s_pci_probe':
sound/soc/loongson/loongson_i2s_pci.c:110:29: error: cast from pointer to integer of different size [-Werror=pointer-to-int-cast]
110 | tx_data->dev_addr = (dma_addr_t)i2s->reg_base + LS_I2S_TX_DATA;
| ^
sound/soc/loongson/loongson_i2s_pci.c:113:29: error: cast from pointer to integer of different size [-Werror=pointer-to-int-cast]
113 | rx_data->dev_addr = (dma_addr_t)i2s->reg_base + LS_I2S_RX_DATA;
| ^
Change the driver to instead use the physical address as stored in the
PCI BAR resource directly. Since 'dev_addr' is a 32-bit address, I think
this results in the same truncated address on loongarch but is otherwise
closer to portable code and avoids the warning.
Fixes: d84881e068 ("ASoC: Add support for Loongson I2S controller")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/Message-Id: <20230622101235.3230941-1-arnd@kernel.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
Remove stale comments in AHUB driver which is related to DAPM
widgets and routes. This is misleading otherwise.
Signed-off-by: Sameer Pujar <spujar@nvidia.com>
Link: https://lore.kernel.org/r/Message-Id: <1687433656-7892-7-git-send-email-spujar@nvidia.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Align with other AHUB module drivers and use normal system
sleep for ASRC as well.
Signed-off-by: Sameer Pujar <spujar@nvidia.com>
Link: https://lore.kernel.org/r/Message-Id: <1687433656-7892-6-git-send-email-spujar@nvidia.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Currently, fsl-asoc-card supports passing the width of the TDM slot, but
not the number of slots in use, as it harcodes it as two slots.
Add support for passing the number of slots in use.
Signed-off-by: Fabio Estevam <festevam@denx.de>
Link: https://lore.kernel.org/r/20230616203913.551183-1-festevam@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Reorder the entries in quirk table to group entries with same platform.
Signed-off-by: Terry Cheong <htcheong@chromium.org>
Signed-off-by: Mac Chiang <mac.chiang@intel.com>
Link: https://lore.kernel.org/r/20230616063617.25900-1-mac.chiang@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Vijendar Mukunda <Vijendar.Mukunda@amd.com>:
This patch series add support for
- Platform device creation for SoundWire Manager instances and
PDM controller.
- SoundWire DMA driver.
- Interrupt handling for SoundWire manager related interrupts,
SoundWire DMA interrupts and ACP error interrupts.
- ACP PCI driver PM ops modification with respect to SoundWire
Power modes.
Merge series from Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>:
Current soc-core.c has snd_soc_{of_}get_dai_name() to get DAI name
for dlc (snd_soc_dai_link_component). It gets .dai_name, but we need
.of_node too. Therefor user need to arrange.
It will be more useful if it gets both .dai_name and .of_node.
This patch adds snd_soc_{of_}get_dlc() for it, and convert to use it.
