IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
H6 SoC has a "pio group withstand voltage mode" register (datasheet
description), that needs to be used to select either 1.8V or 3.3V I/O mode,
based on what voltage is powering the respective pin banks and is thus used
for I/O signals.
Add support for configuring this register according to the voltage of the
pin bank regulator (if enabled).
This is similar to the support for I/O bias voltage setting patch for A80
and the same concerns apply. See:
commit 402bfb3c13 ("Support I/O bias voltage setting on A80")
Signed-off-by: Ondrej Jirman <megous@megous.com>
Acked-by: Maxime Ripard <maxime.ripard@bootlin.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The H6 main pin controller has four banks of interrupt-triggering pins.
The driver as originally submitted only specified three, but had pin
descriptions referencing a fourth bank. This results in a out-of-bounds
access into .irq_array of struct sunxi_pinctrl. This however did not
result in a crash until v4.20, with commit a66d972465 ("devres: Align
data[] to ARCH_KMALLOC_MINALIGN"), which changed the alignment of memory
region returned by devm_kcalloc(). The increase likely moved the
out-of-bounds access into the next, unmapped page.
With KASAN on, the bug is quite clear:
BUG: KASAN: slab-out-of-bounds in sunxi_pinctrl_init_with_variant+0x49c/0x12b8
Write of size 4 at addr ffff80002c680280 by task swapper/0/1
CPU: 2 PID: 1 Comm: swapper/0 Not tainted 5.0.0-rc1-00016-gc480a5e6a077 #3
Hardware name: OrangePi Lite2 (DT)
Call trace:
dump_backtrace+0x0/0x220
show_stack+0x14/0x20
dump_stack+0xac/0xd4
print_address_description+0x60/0x25c
kasan_report+0x14c/0x1ac
__asan_store4+0x80/0xa0
sunxi_pinctrl_init_with_variant+0x49c/0x12b8
h6_pinctrl_probe+0x18/0x20
platform_drv_probe+0x6c/0xc8
really_probe+0x244/0x4b0
driver_probe_device.part.4+0x11c/0x164
__driver_attach+0x120/0x190
bus_for_each_dev+0xe8/0x158
driver_attach+0x30/0x40
bus_add_driver+0x308/0x318
driver_register+0xbc/0x1d0
__platform_driver_register+0x7c/0x88
h6_pinctrl_driver_init+0x18/0x20
do_one_initcall+0xd4/0x208
kernel_init_freeable+0x230/0x2c8
kernel_init+0x10/0x108
ret_from_fork+0x10/0x1c
Allocated by task 1:
kasan_kmalloc.part.0+0x4c/0x100
kasan_kmalloc+0xc4/0xe8
kasan_slab_alloc+0x14/0x20
__kmalloc_track_caller+0x130/0x238
devm_kmalloc+0x34/0xd0
sunxi_pinctrl_init_with_variant+0x1d8/0x12b8
h6_pinctrl_probe+0x18/0x20
platform_drv_probe+0x6c/0xc8
really_probe+0x244/0x4b0
driver_probe_device.part.4+0x11c/0x164
__driver_attach+0x120/0x190
bus_for_each_dev+0xe8/0x158
driver_attach+0x30/0x40
bus_add_driver+0x308/0x318
driver_register+0xbc/0x1d0
__platform_driver_register+0x7c/0x88
h6_pinctrl_driver_init+0x18/0x20
do_one_initcall+0xd4/0x208
kernel_init_freeable+0x230/0x2c8
kernel_init+0x10/0x108
ret_from_fork+0x10/0x1c
Freed by task 0:
(stack is not available)
The buggy address belongs to the object at ffff80002c680080
which belongs to the cache kmalloc-512 of size 512
The buggy address is located 0 bytes to the right of
512-byte region [ffff80002c680080, ffff80002c680280)
The buggy address belongs to the page:
page:ffff7e0000b1a000 count:1 mapcount:0 mapping:ffff80002e00c780 index:0xffff80002c683c80 compound_mapcount: 0
flags: 0x10200(slab|head)
raw: 0000000000010200 ffff80002e003a10 ffff80002e003a10 ffff80002e00c780
raw: ffff80002c683c80 0000000000100001 00000001ffffffff 0000000000000000
page dumped because: kasan: bad access detected
Memory state around the buggy address:
ffff80002c680180: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
ffff80002c680200: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>ffff80002c680280: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
^
ffff80002c680300: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
ffff80002c680380: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
Correct the number of IRQ banks so there are no more mismatches.
Fixes: c8a8309049 ("pinctrl: sunxi: add support for the Allwinner H6 main pin controller")
Cc: <stable@vger.kernel.org>
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Tested-by: Neil Armstrong <narmstrong@baylibre.com>
Acked-by: Maxime Ripard <maxime.ripard@bootlin.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The Allwinner H6 SoC has two pin controllers, one main controller
(called CPUX-PORT in user manual) and one controller in CPUs power
domain (called CPUS-PORT in user manual).
This commit introduces support for the main pin controller on H6.
The pin bank A and B are not wired out and hidden from the SoC's
documents, however it's shown that the "ATE" (an AC200 chip
co-packaged with the H6 die) is connected to the main SoC die via these
pin banks. The information about these banks is just copied from the BSP
pinctrl driver, but re-formatted to fit the mainline pinctrl driver
format. The GPIO functions are dropped, as they're impossible to use --
except a GPIO&IRQ only pin (PB20) which might be the IRQ of ATE.
Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
Acked-by: Rob Herring <robh@kernel.org>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Acked-by: Maxime Ripard <maxime.ripard@bootlin.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
