IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
MAINTAINERS is out of date for leaking_addresses.pl. There is now a tree on
kernel.org for development of this script. We have a second maintainer now,
thanks Tycho. Development of this scripts was started on kernel-hardening
mailing list so let's keep it there.
Update maintainer details; Add mailing list, kernel.org hosted tree, and second
maintainer.
Signed-off-by: Tobin C. Harding <me@tobin.cc>
The original patch submitted for support of the Luxul XWR-1750 used a
non-standard button handler for the reset button. This patch will allow
using the standard KEY_RESTART
Signed-off-by: Dan Haab <dan.haab@luxul.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Hauke Mehrtens <hauke@hauke-m.de>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/18981/
Signed-off-by: James Hogan <jhogan@kernel.org>
Sometimes files may be created by using output from printk. As the scan
traverses the directory tree we should parse each path name and check if
it is leaking an address.
Add check for leaking address on each path name.
Suggested-by: Tycho Andersen <tycho@tycho.ws>
Acked-by: Tycho Andersen <tycho@tycho.ws>
Signed-off-by: Tobin C. Harding <me@tobin.cc>
Currently sub routine may_leak_address() is checking regex against Perl
special variable $_ which is _fortunately_ being set correctly in a loop
before this sub routine is called. We already have declared a variable
to hold this value '$line' we should use it.
Use $line in regex match instead of implicit $_
Signed-off-by: Tobin C. Harding <me@tobin.cc>
We have git now, we don't need a version number. This was originally
added because leaking_addresses.pl shamelessly (and mindlessly) copied
checkpatch.pl
Remove version number from script.
Signed-off-by: Tobin C. Harding <me@tobin.cc>
The pointers listed in /proc/1/syscall are user pointers, and negative
syscall args will show up like kernel addresses.
For example
/proc/31808/syscall: 0 0x3 0x55b107a38180 0x2000 0xffffffffffffffb0 \
0x55b107a302d0 0x55b107a38180 0x7fffa313b8e8 0x7ff098560d11
Skip parsing /proc/1/syscall
Suggested-by: Tycho Andersen <tycho@tycho.ws>
Signed-off-by: Tobin C. Harding <me@tobin.cc>
When the system is idle it is likely that most files under /proc/PID
will be identical for various processes. Scanning _all_ the PIDs under
/proc is unnecessary and implies that we are thoroughly scanning /proc.
This is _not_ the case because there may be ways userspace can trigger
creation of /proc files that leak addresses but were not present during
a scan. For these two reasons we should exclude all PID directories
under /proc except '1/'
Exclude all /proc/PID except /proc/1.
Signed-off-by: Tobin C. Harding <me@tobin.cc>
Currently we are repeatedly calling `uname -m`. This is causing the
script to take a long time to run (more than 10 seconds to parse
/proc/kallsyms). We can use Perl state variables to cache the result of
the first call to `uname -m`. With this change in place the script
scans the whole kernel in under a minute.
Cache machine architecture in state variable.
Signed-off-by: Tobin C. Harding <me@tobin.cc>
Currently script has multiple configuration arrays. This is confusing,
evident by the fact that a bunch of the entries are in the wrong place.
We can simplify the code by just having a single array for absolute
paths to skip and a single array for file names to skip wherever they
appear in the scanned directory tree. There are also currently multiple
subroutines to handle the different arrays, we can reduce these to a
single subroutine also.
Simplify the path skipping code.
Signed-off-by: Tobin C. Harding <me@tobin.cc>
Currently script parses binary files. Since we are scanning for
readable kernel addresses there is no need to parse binary files. We
can use Perl to check if file is binary and skip parsing it if so.
Do not parse binary files.
Signed-off-by: Tobin C. Harding <me@tobin.cc>
Currently script only supports x86_64 and ppc64. It would be nice to be
able to scan 32-bit machines also. We can add support for 32-bit
architectures by modifying how we check for false positives, taking
advantage of the page offset used by the kernel, and using the correct
regular expression.
Support for 32-bit machines is enabled by the observation that the kernel
addresses on 32-bit machines are larger [in value] than the page offset.
We can use this to filter false positives when scanning the kernel for
leaking addresses.
Programmatic determination of the running architecture is not
immediately obvious (current 32-bit machines return various strings from
`uname -m`). We therefore provide a flag to enable scanning of 32-bit
kernels. Also we can check the kernel config file for the offset and if
not found default to 0xc0000000. A command line option to parse in the
page offset is also provided. We do automatically detect architecture
if running on ix86.
Add support for 32-bit kernels. Add a command line option for page
offset.
Suggested-by: Kaiwan N Billimoria <kaiwan.billimoria@gmail.com>
Signed-off-by: Tobin C. Harding <me@tobin.cc>
Currently there is duplicate code when checking the architecture type.
We can remove the duplication by implementing a wrapper function
is_arch().
Implement and use wrapper function is_arch().
Signed-off-by: Tobin C. Harding <me@tobin.cc>
Currently script uses Perl to get the machine architecture. This can be
erroneous since Perl uses the architecture of the machine that Perl was
compiled on not the architecture of the running machine. We should use
the systems `uname` command instead.
Use `uname -m` instead of Perl to get the machine architecture.
Signed-off-by: Tobin C. Harding <me@tobin.cc>
Currently script only supports 4 page table levels because of the way
the kernel address regular expression is crafted. We can do better than
this. Using previously added support for kernel configuration options we
can get the number of page table levels defined by
CONFIG_PGTABLE_LEVELS. Using this value a correct regular expression can
be crafted. This only supports 5 page tables on x86_64.
Add support for 5 page table levels on x86_64.
Signed-off-by: Tobin C. Harding <me@tobin.cc>
Features that rely on the ability to get kernel configuration options
are ready to be implemented in script. In preparation for this we can
add support for kernel config options as a separate patch to ease
review.
Add support for locating and parsing kernel configuration file.
Signed-off-by: Tobin C. Harding <me@tobin.cc>
Currently script checks only first and last address in the vsyscall
memory range. We can do better than this. When checking for false
positives against $match, we can convert $match to a hexadecimal value
then check if it lies within the range of vsyscall addresses.
Check whole range of vsyscall addresses when checking for false
positive.
Signed-off-by: Tobin C. Harding <me@tobin.cc>
A number of the command line options to script are dependant on the
option --input-raw being set. If we indent these options it makes
explicit this dependency.
Indent options dependant on --input-raw.
Signed-off-by: Tobin C. Harding <me@tobin.cc>
Currently help output includes command examples. These were cute when we
first started development of this script but are unnecessary.
Remove command examples.
Signed-off-by: Tobin C. Harding <me@tobin.cc>
leaking_addresses.pl can be run with kptr_restrict==0 now, we don't need
the comment about setting kptr_restrict any more.
Remove comment suggesting setting kptr_restrict.
Signed-off-by: Tobin C. Harding <me@tobin.cc>
Currently code uses a check against an undefined variable because the
variable is a sub routine name and is not evaluated.
Evaluate subroutine; add parenthesis to sub routine name.
Signed-off-by: Tobin C. Harding <me@tobin.cc>
Commit 58eb5b6707 ("pstore: fix crypto dependencies") fixed up the crypto
dependencies but missed the case when no compression is selected.
With CONFIG_PSTORE=y, CONFIG_PSTORE_COMPRESS=n and CONFIG_CRYPTO=m we see
the following link error:
fs/pstore/platform.o: In function `pstore_register':
(.text+0x1b1): undefined reference to `crypto_has_alg'
(.text+0x205): undefined reference to `crypto_alloc_base'
fs/pstore/platform.o: In function `pstore_unregister':
(.text+0x3b0): undefined reference to `crypto_destroy_tfm'
Fix this by checking at compile-time if CONFIG_PSTORE_COMPRESS is enabled.
Fixes: 58eb5b6707 ("pstore: fix crypto dependencies")
Signed-off-by: Tobias Regnery <tobias.regnery@gmail.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Kees Cook <keescook@chromium.org>
-----BEGIN PGP SIGNATURE-----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=p2Sh
-----END PGP SIGNATURE-----
Merge tag 'selinux-pr-20180403' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux
Pull SELinux updates from Paul Moore:
"A bigger than usual pull request for SELinux, 13 patches (lucky!)
along with a scary looking diffstat.
Although if you look a bit closer, excluding the usual minor
tweaks/fixes, there are really only two significant changes in this
pull request: the addition of proper SELinux access controls for SCTP
and the encapsulation of a lot of internal SELinux state.
The SCTP changes are the result of a multi-month effort (maybe even a
year or longer?) between the SELinux folks and the SCTP folks to add
proper SELinux controls. A special thanks go to Richard for seeing
this through and keeping the effort moving forward.
The state encapsulation work is a bit of janitorial work that came out
of some early work on SELinux namespacing. The question of namespacing
is still an open one, but I believe there is some real value in the
encapsulation work so we've split that out and are now sending that up
to you"
* tag 'selinux-pr-20180403' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux:
selinux: wrap AVC state
selinux: wrap selinuxfs state
selinux: fix handling of uninitialized selinux state in get_bools/classes
selinux: Update SELinux SCTP documentation
selinux: Fix ltp test connect-syscall failure
selinux: rename the {is,set}_enforcing() functions
selinux: wrap global selinux state
selinux: fix typo in selinux_netlbl_sctp_sk_clone declaration
selinux: Add SCTP support
sctp: Add LSM hooks
sctp: Add ip option support
security: Add support for SCTP security hooks
netlabel: If PF_INET6, check sk_buff ip header version
-----BEGIN PGP SIGNATURE-----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=n1dk
-----END PGP SIGNATURE-----
Merge tag 'audit-pr-20180403' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/audit
Pull audit updates from Paul Moore:
"We didn't have anything to send for v4.16, but we're back with a
little more than usual for v4.17.
Eleven patches in total, most fall into the small fix category, but
there are three non-trivial changes worth calling out:
- the audit entry filter is being removed after deprecating it for
quite a while (years of no one really using it because it turns out
to be not very practical)
- created our own version of "__mutex_owner()" because the locking
folks were upset we were using theirs
- improved our handling of kernel command line parameters to make
them more forgiving
- we fixed auditing of symlink operations
Everything passes the audit-testsuite and as of a few minutes ago it
merges well with your tree"
* tag 'audit-pr-20180403' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/audit:
audit: add refused symlink to audit_names
audit: remove path param from link denied function
audit: link denied should not directly generate PATH record
audit: make ANOM_LINK obey audit_enabled and audit_dummy_context
audit: do not panic on invalid boot parameter
audit: track the owner of the command mutex ourselves
audit: return on memory error to avoid null pointer dereference
audit: bail before bug check if audit disabled
audit: deprecate the AUDIT_FILTER_ENTRY filter
audit: session ID should not set arch quick field pointer
audit: update bugtracker and source URIs
- Refactor to use crypto compression API (Geliang Tang)
- Fix up Kconfig dependencies for compression (Arnd Bergmann)
- Allow for run-time compression selection
- Remove stack VLA usage
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
Comment: Kees Cook <kees@outflux.net>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=gqnB
-----END PGP SIGNATURE-----
Merge tag 'pstore-v4.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull pstore updates from Kees Cook:
"This cycle was almost entirely improvements to the pstore compression
options, noted below:
- Add lz4hc and 842 to pstore compression options (Geliang Tang)
- Refactor to use crypto compression API (Geliang Tang)
- Fix up Kconfig dependencies for compression (Arnd Bergmann)
- Allow for run-time compression selection
- Remove stack VLA usage"
* tag 'pstore-v4.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
pstore: fix crypto dependencies
pstore: Use crypto compress API
pstore/ram: Do not use stack VLA for parity workspace
pstore: Select compression at runtime
pstore: Avoid size casts for 842 compression
pstore: Add lz4hc and 842 compression support
Merge updates from Andrew Morton:
- a few misc things
- ocfs2 updates
- the v9fs maintainers have been missing for a long time. I've taken
over v9fs patch slinging.
- most of MM
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (116 commits)
mm,oom_reaper: check for MMF_OOM_SKIP before complaining
mm/ksm: fix interaction with THP
mm/memblock.c: cast constant ULLONG_MAX to phys_addr_t
headers: untangle kmemleak.h from mm.h
include/linux/mmdebug.h: make VM_WARN* non-rvals
mm/page_isolation.c: make start_isolate_page_range() fail if already isolated
mm: change return type to vm_fault_t
mm, oom: remove 3% bonus for CAP_SYS_ADMIN processes
mm, page_alloc: wakeup kcompactd even if kswapd cannot free more memory
kernel/fork.c: detect early free of a live mm
mm: make counting of list_lru_one::nr_items lockless
mm/swap_state.c: make bool enable_vma_readahead and swap_vma_readahead() static
block_invalidatepage(): only release page if the full page was invalidated
mm: kernel-doc: add missing parameter descriptions
mm/swap.c: remove @cold parameter description for release_pages()
mm/nommu: remove description of alloc_vm_area
zram: drop max_zpage_size and use zs_huge_class_size()
zsmalloc: introduce zs_huge_class_size()
mm: fix races between swapoff and flush dcache
fs/direct-io.c: minor cleanups in do_blockdev_direct_IO
...
Core:
* Remove support for asynchronous erase (not implemented by any of
the existing drivers anyway)
* Remove Cyrille from the list of SPI NOR and MTD maintainers
* Fix kernel doc headers
* Allow users to define the partitions parsers they want to test
through a DT property (compatible of the partitions subnode)
* Remove the bfin-async-flash driver (the only architecture using
it has been removed)
* Fix pagetest test
* Add extra checks in mtd_erase()
* Simplify the MTD partition creation logic and get rid of
mtd_add_device_partitions()
Drivers:
* Add endianness information to the physmap DT binding
* Add Eon EN29LV400A IDs to JEDEC probe logic
* Use %*ph where appropriate
SPI NOR changes:
Drivers:
* Make fsl-quaspi assign different names to MTD devices connected
to the same QSPI controller
* Remove an unneeded driver.bus assigned in the fsl-qspi driver
NAND changes:
Core:
* Prepare arrival of the SPI NAND subsystem by implementing a
generic (interface-agnostic) layer to ease manipulation of NAND
devices
* Move onenand code base to the drivers/mtd/nand/ dir
* Rework timing mode selection
* Provide a generic way for NAND chip drivers to flag a specific
GET/SET FEATURE operation as supported/unsupported
* Stop embedding ONFI/JEDEC param page in nand_chip
Drivers:
* Rework/cleanup of the mxc driver
* Various cleanups in the vf610 driver
* Migrate the fsmc and vf610 to ->exec_op()
* Get rid of the pxa driver (replaced by marvell_nand)
* Support ->setup_data_interface() in the GPMI driver
* Fix probe error path in several drivers
* Remove support for unused hw_syndrome mode in sunxi_nand
* Various minor improvements
-----BEGIN PGP SIGNATURE-----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=EG7L
-----END PGP SIGNATURE-----
Merge tag 'mtd/for-4.17' of git://git.infradead.org/linux-mtd
Pull MTD updates from Boris Brezillon:
"MTD Core:
- Remove support for asynchronous erase (not implemented by any of
the existing drivers anyway)
- Remove Cyrille from the list of SPI NOR and MTD maintainers
- Fix kernel doc headers
- Allow users to define the partitions parsers they want to test
through a DT property (compatible of the partitions subnode)
- Remove the bfin-async-flash driver (the only architecture using it
has been removed)
- Fix pagetest test
- Add extra checks in mtd_erase()
- Simplify the MTD partition creation logic and get rid of
mtd_add_device_partitions()
MTD Drivers:
- Add endianness information to the physmap DT binding
- Add Eon EN29LV400A IDs to JEDEC probe logic
- Use %*ph where appropriate
SPI NOR Drivers:
- Make fsl-quaspi assign different names to MTD devices connected to
the same QSPI controller
- Remove an unneeded driver.bus assigned in the fsl-qspi driver
NAND Core:
- Prepare arrival of the SPI NAND subsystem by implementing a generic
(interface-agnostic) layer to ease manipulation of NAND devices
- Move onenand code base to the drivers/mtd/nand/ dir
- Rework timing mode selection
- Provide a generic way for NAND chip drivers to flag a specific
GET/SET FEATURE operation as supported/unsupported
- Stop embedding ONFI/JEDEC param page in nand_chip
NAND Drivers:
- Rework/cleanup of the mxc driver
- Various cleanups in the vf610 driver
- Migrate the fsmc and vf610 to ->exec_op()
- Get rid of the pxa driver (replaced by marvell_nand)
- Support ->setup_data_interface() in the GPMI driver
- Fix probe error path in several drivers
- Remove support for unused hw_syndrome mode in sunxi_nand
- Various minor improvements"
* tag 'mtd/for-4.17' of git://git.infradead.org/linux-mtd: (89 commits)
dt-bindings: fsl-quadspi: Add the example of two SPI NOR
mtd: fsl-quadspi: Distinguish the mtd device names
mtd: nand: Fix some function description mismatches in core.c
mtd: fsl-quadspi: Remove unneeded driver.bus assignment
mtd: rawnand: marvell: Rename ->ecc_clk into ->core_clk
mtd: rawnand: s3c2410: enhance the probe function error path
mtd: rawnand: tango: fix probe function error path
mtd: rawnand: sh_flctl: fix the probe function error path
mtd: rawnand: omap2: fix the probe function error path
mtd: rawnand: mxc: fix probe function error path
mtd: rawnand: denali: fix probe function error path
mtd: rawnand: davinci: fix probe function error path
mtd: rawnand: cafe: fix probe function error path
mtd: rawnand: brcmnand: fix probe function error path
mtd: rawnand: sunxi: Stop supporting ECC_HW_SYNDROME mode
mtd: rawnand: marvell: Fix clock resource by adding a register clock
mtd: ftl: Use DIV_ROUND_UP()
mtd: Fix some function description mismatches in mtdcore.c
mtd: physmap_of: update struct map_info's swap as per map requirement
dt-bindings: mtd-physmap: Add endianness supports
...
that table's block devices, while issuing the ioctl to one of those
block devices.
- DM core passthrough ioctl fix to _not_ override the fmode_t used to
issue the ioctl. Overriding by using the fmode_t that the block
device was originally open with during DM table load is a liability.
- Add DM core support for secure erase forwarding and update the DM
linear and DM striped targets to support them.
- A DM core 4.16 stable fix to allow abnormal IO (e.g. discard, write
same, write zeroes) for targets that make use of the non-splitting IO
variant (as is done for multipath or thinp when layered directly on
NVMe).
- Allow DM targets to return a payload in response to a DM message that
they are sent. This is useful for DM targets that would like to
provide statistics data in response to DM messages.
- Update DM bufio to support non-power-of-2 block sizes. Numerous other
related changes prepare the DM bufio code for this support.
- Fix DM crypt to use a bounded amount of memory across the entire
system. This is to avoid OOM that can otherwise occur in response to
certain pathological IO workloads (e.g. discarding a large DM crypt
device).
- Add a 'check_at_most_once' feature to the DM verity target to allow
verity to be used on mobile devices that have very limited resources.
- Fix the DM integrity target to fail early if a keyed algorithm
(e.g. HMAC) is to be used but the key isn't set.
- Add non-power-of-2 support to the DM unstripe target.
- Eliminate the use of a Variable Length Array in the DM stripe target.
- Update the DM log-writes target to record metadata (REQ_META flag).
- DM raid fixes for its nosync status and some variable range issues.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJaxjrCAAoJEMUj8QotnQNaEW8IAMeb6dWbxBgCleafK7GV5I0B
jdm6NWDGoGrhz5TyZXbd6pLXD6fbU51O2Jn/LyQ7KOY1lRlS66TBprR60gNyzPQn
bQVVEbKnSMwNAnkVpStiVZSs2e9HyNIRsM0yvwZXPfcVw6Q8XttiJQHRdGu4A5jm
i+/aoyAf1iJowe5ituyE569gFGnOzPmesKZoF2/A36ik3yq3HF4FR0IPxWKseSpt
gCeGTPpBv3aRonRBDxT9uOwb3SXC8TGrStRLm1I6UFwmHKs7nWx/o/P1ghbSOgSt
Gu+GdoXnG5qtzAZ1t3sR2Iw3zEmpO1t5Jht5VqR7T+1145DaoPkW5M8vyjHll5o=
=H7V5
-----END PGP SIGNATURE-----
Merge tag 'for-4.17/dm-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm
Pull device mapper updates from Mike Snitzer:
- DM core passthrough ioctl fix to retain reference to DM table, and
that table's block devices, while issuing the ioctl to one of those
block devices.
- DM core passthrough ioctl fix to _not_ override the fmode_t used to
issue the ioctl. Overriding by using the fmode_t that the block
device was originally open with during DM table load is a liability.
- Add DM core support for secure erase forwarding and update the DM
linear and DM striped targets to support them.
- A DM core 4.16 stable fix to allow abnormal IO (e.g. discard, write
same, write zeroes) for targets that make use of the non-splitting IO
variant (as is done for multipath or thinp when layered directly on
NVMe).
- Allow DM targets to return a payload in response to a DM message that
they are sent. This is useful for DM targets that would like to
provide statistics data in response to DM messages.
- Update DM bufio to support non-power-of-2 block sizes. Numerous other
related changes prepare the DM bufio code for this support.
- Fix DM crypt to use a bounded amount of memory across the entire
system. This is to avoid OOM that can otherwise occur in response to
certain pathological IO workloads (e.g. discarding a large DM crypt
device).
- Add a 'check_at_most_once' feature to the DM verity target to allow
verity to be used on mobile devices that have very limited resources.
- Fix the DM integrity target to fail early if a keyed algorithm (e.g.
HMAC) is to be used but the key isn't set.
- Add non-power-of-2 support to the DM unstripe target.
- Eliminate the use of a Variable Length Array in the DM stripe target.
- Update the DM log-writes target to record metadata (REQ_META flag).
- DM raid fixes for its nosync status and some variable range issues.
* tag 'for-4.17/dm-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm: (28 commits)
dm: remove fmode_t argument from .prepare_ioctl hook
dm: hold DM table for duration of ioctl rather than use blkdev_get
dm raid: fix parse_raid_params() variable range issue
dm verity: make verity_for_io_block static
dm verity: add 'check_at_most_once' option to only validate hashes once
dm bufio: don't embed a bio in the dm_buffer structure
dm bufio: support non-power-of-two block sizes
dm bufio: use slab cache for dm_buffer structure allocations
dm bufio: reorder fields in dm_buffer structure
dm bufio: relax alignment constraint on slab cache
dm bufio: remove code that merges slab caches
dm bufio: get rid of slab cache name allocations
dm bufio: move dm-bufio.h to include/linux/
dm bufio: delete outdated comment
dm: add support for secure erase forwarding
dm: backfill abnormal IO support to non-splitting IO submission
dm raid: fix nosync status
dm mpath: use DM_MAPIO_SUBMITTED instead of magic number 0 in process_queued_bios()
dm stripe: get rid of a Variable Length Array (VLA)
dm log writes: record metadata flag for better flags record
...
The LED2[2]/INTn pin on Marvell 88E1318S as well as 88E1510/12/14/18 needs
to be configured to be usable as interrupt not only when WOL is enabled,
but whenever we rely on interrupts from the PHY.
Signed-off-by: Esben Haabendal <eha@deif.com>
Cc: Rasmus Villemoes <rasmus.villemoes@prevas.dk>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Make the function static to avoid a
warning: no previous prototype for ‘vmx_enable_tdp’
Signed-off-by: Peng Hao <peng.hao2@zte.com.cn>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Jeff Kirsher says:
====================
Intel Wired LAN Driver Updates 2018-04-06
This series contains a couple of fixes for the new ice driver.
Wei Yongjun fixes the return error code for error case during init.
Anirudh fixes the incorrect use of ARRAY_SIZE() in the ice ethtool code
and fixed "for" loop calculations.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Switch simpad's CF implementation to use the gpiod APIs. The inverted
detection is handled using gpiolib's native inversion abilities.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Convert nanoengine to use the generic CF socket support.
Makefile fix from Arnd Bergmann <arnd@arndb.de>.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
1) Return correct size from ice_get_regs_len.
2) Fix incorrect use of ARRAY_SIZE in ice_get_regs.
Fixes: fcea6f3da5 (ice: Add stats and ethtool support)
Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com>
Tested-by: Tony Brelinski <tonyx.brelinski@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Fix to return error code ICE_ERR_NO_MEMORY from the alloc error
handling case instead of 0, as done elsewhere in this function.
Fixes: dc49c77236 ("ice: Get MAC/PHY/link info and scheduler topology")
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Acked-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com>
Tested-by: Tony Brelinski <tonyx.brelinski@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Maintain a catalogue of allocated cookies so that cookie collisions can be
handled properly. For the moment, this just involves printing a warning
and returning a NULL cookie to the caller of fscache_acquire_cookie(), but
in future it might make sense to wait for the old cookie to finish being
cleaned up.
This requires the cookie key to be stored attached to the cookie so that we
still have the key available if the netfs relinquishes the cookie. This is
done by an earlier patch.
The catalogue also renders redundant fscache_netfs_list (used for checking
for duplicates), so that can be removed.
Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Anna Schumaker <anna.schumaker@netapp.com>
Tested-by: Steve Dickson <steved@redhat.com>
Pass the object size in to fscache_acquire_cookie() and
fscache_write_page() rather than the netfs providing a callback by which it
can be received. This makes it easier to update the size of the object
when a new page is written that extends the object.
The current object size is also passed by fscache to the check_aux
function, obviating the need to store it in the aux data.
Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Anna Schumaker <anna.schumaker@netapp.com>
Tested-by: Steve Dickson <steved@redhat.com>
With trace events set before and after the initcall function calls, instead
of having a separate routine for printing out the initcalls when
initcall_debug is specified on the kernel command line, have the code
register a callback to the tracepoints where the initcall trace events are.
This removes the need for having a separate function to do the initcalls as
the tracepoint callbacks can handle the printk. It also includes other
initcalls that are not called by the do_one_initcall() which includes
console and security initcalls.
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Trace events have been added around the initcall functions defined in
init/main.c. But console and security have their own initcalls. This adds
the trace events associated for those initcall functions.
Link: http://lkml.kernel.org/r/1521765208.19745.2.camel@polymtl.ca
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Abderrahmane Benbachir <abderrahmane.benbachir@polymtl.ca>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Being able to trace the start and stop of initcalls is useful to see where
the timings are an issue. There is already an "initcall_debug" parameter,
but that can cause a large overhead itself, as the printing of the
information may take longer than the initcall functions.
Adding in a start and finish trace event around the initcall functions, as
well as a trace event that records the level of the initcalls, one can get a
much finer measurement of the times and interactions of the initcalls
themselves, as trace events are much lighter than printk()s.
Suggested-by: Abderrahmane Benbachir <abderrahmane.benbachir@polymtl.ca>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
A boot up test function update_pred_fn() dereferences filter->prog without
the proper rcu annotation.
To do this, we must also take the event_mutex first. Normally, this isn't
needed because this test function can not race with other use cases that
touch the event filters (it is disabled if any events are enabled).
Reported-by: kbuild test robot <fengguang.wu@intel.com>
Fixes: 80765597bc ("tracing: Rewrite filter logic to be simpler and faster")
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
ftrace_function_set_filter() referenences filter->prog without annotation
and sparse complains about it. It needs a rcu_dereference_protected()
wrapper.
Reported-by: kbuild test robot <fengguang.wu@intel.com>
Fixes: 80765597bc ("tracing: Rewrite filter logic to be simpler and faster")
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
In commit 932066a15335 ("tracing: Default to using trace_global_clock if
sched_clock is unstable"), the logic for deciding to override the
default clock if unstable was reversed from the earlier posting. I was
trying to reduce the width of the message by using an early return
rather than a if-block, but reverted back to using the if-block and
accidentally left the predicate inverted.
Link: http://lkml.kernel.org/r/20180404212450.26646-1-chris@chris-wilson.co.uk
Fixes: 932066a15335 ("tracing: Default to using trace_global_clock if sched_clock is unstable")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Function tracing can trace in NMIs and such. If the TSC is determined
to be unstable, the tracing clock will switch to the global clock on
boot up, unless "trace_clock" is specified on the kernel command line.
The global clock disables interrupts to access sched_clock_cpu(), and in
doing so can be done within lockdep internals (because of function
tracing and NMIs). This can trigger false lockdep splats.
The trace_clock_global() is special, best not to trace the irq logic
within it.
Link: http://lkml.kernel.org/r/20180404145015.77bde42d@gandalf.local.home
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
