IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
Prepare for per-lane drive settings by querying the desired vswing
level per-lane.
Note that the code only does two loops, with each one writing the
levels for two TX lanes. The register offsets also look a bit funny
because each time through the loop we write to the exact same
register offsets. The crucial bit is the HIP_INDEX_REG
write that steers the same mmio window into different places.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211006204937.30774-11-ville.syrjala@linux.intel.com
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Prepare for per-lane drive settings by querying the desired vswing
level per-lane.
Note that the code only does two loops, with each one writing the
levels for two TX lanes.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211006204937.30774-10-ville.syrjala@linux.intel.com
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
The comment mentions that the KMS is enabled by default unless either the
i915.modeset module parameter or vga_text_mode_force boot option are used.
But the latter does not exist and instead the nomodeset option was meant.
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211103122809.1040754-2-javierm@redhat.com
At least during hibernation the DPT mappings are lost with all stolen
memory content, so suspend/resume these mappings similarly to GGTT
mappings.
This fixes a problem where the restoring modeset during system resume fails
with pipe faults if a tiled framebuffer was active before suspend.
v2: Clarify the way restore works in intel_dpt_resume()'s Docbook entry.
(Chris)
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Vunny Sodhi <vunny.sodhi@intel.com>
Reported-and-tested-by: Vunny Sodhi <vunny.sodhi@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211101183551.3580546-2-imre.deak@intel.com
Factor out functions that are needed by the next patch to suspend/resume
the memory mappings for DPT FBs.
No functional change, except reordering during suspend the
ggtt->invalidate(ggtt) call wrt. atomic_set(&ggtt->vm.open, open) and
mutex_unlock(&ggtt->vm.mutex). This shouldn't matter due to the i915
suspend sequence being single threaded.
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211101183551.3580546-1-imre.deak@intel.com
As opposed to other GEN12 platforms ADLP provides a way to program the
stride of CCS surfaces independently of the main surface stride (within
the corresponding limit of the preceding and succeeding power-of-two
values of the main surface stride). Using this HW feature we can remove
the POT stride restriction on CCS surfaces, making the ADLP CCS FB uAPI
(FB modifiers) identical to that of TGL.
The HW makes the CCS stride flexible programming possible by deriving
the stride from the value programmed to the PLANE_STRIDE register. After
that the HW rounds up this value to the next power-of-two value and uses
this for walking the pages of the main surface mapped to GTT/DPT.
To align with the above scheme, introduce a scanout_stride view
parameter which will be programmed to the PLANE_STRIDE register and use
the mapping_stride view param to store the POT aligned value of the
same. By requiring userspace to pass in FBs with a CCS stride that
aligns with the main surface stride (matching the requirement of all
GEN12 platforms), the scanout_stride will be the userspace main surface
stride and the mapping_stride will be the POT rounded value of the same.
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
Cc: Nanley G Chery <nanley.g.chery@intel.com>
Cc: Sameer Lattannavar <sameer.lattannavar@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211026225105.2783797-8-imre.deak@intel.com
Since the surfaces of tiled FBs on ADLP are remapped it's pointless to
require an alignment in the allocated object. The necessary tile-row
alignment (to be programmed to the surface start register) will be
ensured later when flipping to the FB.
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211026225105.2783797-7-imre.deak@intel.com
The next patch needs to distinguish between a view's mapping and scanout
stride. Rename the current stride parameter to mapping_stride with the
script below. mapping_stride will keep the same meaning as stride had
on all platforms so far, while the meaning of it will change on ADLP.
No functional changes.
@@
identifier intel_fb_view;
identifier i915_color_plane_view;
identifier color_plane;
expression e;
type T;
@@
struct intel_fb_view {
...
struct i915_color_plane_view {
...
- T stride;
+ T mapping_stride;
...
} color_plane[e];
...
};
@@
struct i915_color_plane_view pv;
@@
pv.
- stride
+ mapping_stride
@@
struct i915_color_plane_view *pvp;
@@
pvp->
- stride
+ mapping_stride
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211026225105.2783797-6-imre.deak@intel.com
During remapping CCS FBs the CCS AUX surface mapped size and offset->x,y
coordinate calculations assumed a tiled layout. This works as long as
the CCS surface height is aligned to 64 lines (ensuring a 4k bytes CCS
surface tile layout). However this alignment is not required by the HW
(and the driver doesn't enforces it either).
Add the remapping logic required to remap the pages of CCS surfaces
without the above alignment, assuming the natural linear layout of the
CCS surface (vs. tiled main surface layout).
Cc: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Fixes: 3d1adc3d64cf ("drm/i915/adlp: Add support for remapping CCS FBs")
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211026225105.2783797-5-imre.deak@intel.com
Factor out functions needed to map contiguous FB obj pages to a GTT/DPT
VMA view in the next patch.
While at it s/4096/I915_GTT_PAGE_SIZE/ in add_padding_pages().
No functional changes.
v2: s/4096/I915_GTT_PAGE_SIZE/ (Matthew)
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211026225105.2783797-4-imre.deak@intel.com
So far the remapped view size in GTT/DPT was padded to the next aligned
offset unnecessarily after the last color plane with an unaligned size.
Remove the unnecessary padding.
Cc: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
Fixes: 3d1adc3d64cf ("drm/i915/adlp: Add support for remapping CCS FBs")
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211026225105.2783797-3-imre.deak@intel.com
For NV12 FBs with odd main surface tile-row height the CCS surface
height was incorrectly calculated 1 less than the actual value. Fix this
by rounding up the result of divison. For consistency do the same for
the CCS surface width calculation.
Fixes: b3e57bccd68a ("drm/i915/tgl: Gen-12 render decompression")
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211026225105.2783797-2-imre.deak@intel.com
XE_LPD display adds support for display audio codec keepalive feature.
This feature works also when display codec is in D3 state and the audio
link is off (BCLK off). To enable this functionality, display driver
must update the AUD_TS_CDCLK_M/N registers whenever CDCLK is changed.
Actual timestamps are generated only when the audio codec driver
specifically enables the KeepAlive (KAE) feature.
This patch adds new hooks to intel_set_cdclk() in order to inform
display audio driver when CDCLK change is started and when it is
complete.
Bspec: 53679
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Acked-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Uma Shankar <uma.shankar@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211021105915.4128635-1-kai.vehmanen@linux.intel.com
For every crtc in state, intel_atomic_check_async() was checking all
the crtc and plane states again.
v2: comparing pipe ids instead of crtc pointers when iterating over
planes
Cc: Karthik B S <karthik.b.s@intel.com>
Cc: Vandita Kulkarni <vandita.kulkarni@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211029202432.140745-1-jose.souza@intel.com
Looks like our VBIOS/GOP generally fail to turn the DP dual mode adater
TMDS output buffers back on after a reboot. This leads to a black screen
after reboot if we turned the TMDS output buffers off prior to reboot.
And if i915 decides to do a fastboot the black screen will persist even
after i915 takes over.
Apparently this has been a problem ever since commit b2ccb822d376 ("drm/i915:
Enable/disable TMDS output buffers in DP++ adaptor as needed") if one
rebooted while the display was turned off. And things became worse with
commit fe0f1e3bfdfe ("drm/i915: Shut down displays gracefully on reboot")
since now we always turn the display off before a reboot.
This was reported on a RKL, but I confirmed the same behaviour on my
SNB as well. So looks pretty universal.
Let's fix this by explicitly turning the TMDS output buffers back on
in the encoder->shutdown() hook. Note that this gets called after irqs
have been disabled, so the i2c communication with the DP dual mode
adapter has to be performed via polling (which the gmbus code is
perfectly happy to do for us).
We also need a bit of care in handling DDI encoders which may or may
not be set up for HDMI output. Specifically ddc_pin will not be
populated for a DP only DDI encoder, in which case we don't want to
call intel_gmbus_get_adapter(). We can handle that by simply doing
the dual mode adapter type check before calling
intel_gmbus_get_adapter().
Cc: <stable@vger.kernel.org> # v5.11+
Fixes: fe0f1e3bfdfe ("drm/i915: Shut down displays gracefully on reboot")
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/4371
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211029191802.18448-2-ville.syrjala@linux.intel.com
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
We will need to do some i2c poking from the encoder->shutdown() hook.
Currently that gets called after irqs have been turned off. We still
poll the gmbus status bits even if the interrupt never arrives so
things will work just fine. But seems like asking gmbus to generate
interrupts we will never see is a bit pointless, so don't.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211029191802.18448-1-ville.syrjala@linux.intel.com
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
So far we had support for main, PipeA and PipeB
DMC. If we find a binary from PipeA-D, lets load it.
Cc: Imre Deak <imre.deak@intel.com>
Signed-off-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211006204547.669464-1-anusha.srivatsa@intel.com
This reverts commit 1f61f0655b95d5b89589390e6f83c4a61d9b1e8d.
Now we are supporting selective fetch for biplanar formats.
We can revert WA patch which forced using full fetch for biplanar
formats.
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211021101024.13112-3-jouni.hogander@intel.com
Biplanar formats are using two planes (Y and UV). This patch adds handling
of Y selective fetch area by utilizing existing linked plane mechanism.
Also UV plane Y offset configuration is modified according to Bspec.
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211021101024.13112-2-jouni.hogander@intel.com
By using the modifier plane capability flags to encode the modifiers'
CCS type and tiling attributes, it becomes simpler to the check for
any of these capabilities when providing the list of supported
modifiers.
This also allows distinguishing modifiers on future platforms where
platforms with the same display version support different modifiers. An
example is DG2 and ADLP, both being D13, where DG2 supports only F and X
tiling, while ADLP supports only Y and X tiling. With the
INTEL_PLANE_CAP_TILING_* flags added in this patch we can provide
the correct modifiers for each platform.
v2:
- Define PLANE_HAS_* with macros instead of an enum. (Jani)
- Rename PLANE_HAS_*_ANY to PLANE_HAS_*_MASK. (Jani)
- Rename PLANE_HAS_* to INTEL_PLANE_CAP_*.
- Set the CCS_RC_CC cap only for DISPLAY_VER >= 12.
- Set the TILING_Y cap only for DISPLAY_VER < 13 || ADLP.
- Simplify the SKL plane cap display version checks and move them
to a separate function.
Cc: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211027125150.2891371-1-imre.deak@intel.com
Variables of enum types can contain only the values listed at the enums
definition, so don't store bitmasks in intel_plane_caps enum variables.
Cc: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211026161517.2694067-3-imre.deak@intel.com
Remove the MC CCS plane capability on GEN<12, since it's not present
there. This didn't cause a problem, since the display version check
filtered out the MC CCS modifiers before GEN12.
Cc: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211026161517.2694067-2-imre.deak@intel.com
Our lane power down defines already include the necessary shift,
don't shift them a second time.
Fortunately we masked off the correct bits, so we accidentally
left all lanes powered up all the time.
Bits 8-11 where we end up writing our misdirected lane mask are
documented as MBZ, but looks like you can actually write there
so they're not read only bits. No idea what side effect the
bogus register write might have.
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/4151
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211006204937.30774-17-ville.syrjala@linux.intel.com
Reviewed-by: Imre Deak <imre.deak@intel.com>
Looks like we never updated intel_bios_is_port_dp_dual_mode() when
the VBT port mapping became erratic on modern platforms. This
is causing us to look up the wrong child device and thus throwing
the heuristic off (ie. we might end looking at a child device for
a genuine DP++ port when we were supposed to look at one for a
native HDMI port).
Fix it up by not using the outdated port_mapping[] in
intel_bios_is_port_dp_dual_mode() and rely on
intel_bios_encoder_data_lookup() instead.
Cc: stable@vger.kernel.org
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/4138
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211025142147.23897-1-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
PSR2 is supported in transcoder A and B on Alderlake-P.
v2:
- explicity checking for transcoder A and B to avoid invalid transcoder
BSpec: 49185
Reviewed-by: Jouni Högander <jouni.hogander@intel.com> # v1
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Mika Kahola <mika.kahola@intel.com>
Cc: Jouni Hogander <jouni.hogander@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Mika Kahola <mika.kahola@intel.com> # v2
Link: https://patchwork.freedesktop.org/patch/msgid/20211027180545.55660-1-jose.souza@intel.com
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmF298ceHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGIJYH/1rsEFQQ6caeQdy1
z9eFIe48DNM4l7bFk+qEj2UAbzPdahVJ299Mg5fW0n2CDemOc9/n0b9TxQ37YObi
mOzu0xwJVupIxkyFMPQSSc2q8aLm67NSpJy08DsmaNses5hSvu8x15RPHLQTybjt
SwtKns+jpCq79P1GWbrB5e5UkLb0VNoxNp4L1U4pMrYGcEkJUXbaxNY2V/JcXdM7
Vtn+qN0T/J6V6QVftv0t8Ecj3bjEnmL3kZHaTaNg3dGeKRpCGyHc5lcBQ0cNFG6t
vjZ9VbuhBzGI3TN2tHH5hpA1UXo7HPBBCwQqxF1jeGLGHULikYwZ3TAPWqL3QZqC
9cxr9SY=
=p75d
-----END PGP SIGNATURE-----
BackMerge tag 'v5.15-rc7' into drm-next
The msm next tree is based on rc3, so let's just backmerge rc7 before pulling it in.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Try to make bigjoiner pipes less special.
The main things here are that each pipe now does full
clock computation/readout with its own shared_dpll reference.
Also every pipe's cpu_transcoder always points correctly
at the master transcoder.
Due to the above changes state readout is now complete
and all the related hacks can go away. The actual modeset
sequence code is still a mess, but I think in order to clean
that up properly we're probably going to have to redesign
the modeset logic to treat transcoders vs. pipes separately.
That is going to require significant amounts of work.
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211022103304.24164-9-ville.syrjala@linux.intel.com
The PPS SDP is fed into the transcoder whereas the DSC
block is (or at least can be) per pipe. Let's split these
into two distinct operations in an effort to untagle the
bigjoiner mess where we have two pipes feeding a single
transcoder.
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211022103304.24164-7-ville.syrjala@linux.intel.com
Let's disable planes on all pipes affected by the modeset before
we start doing the actual modeset. This means we have less
random planes enabled during the modeset, and it also mirrors
what we already do when enabling pipes on skl+ since we enable
planes on all pipes as the very last step. As a bonus we also
nuke a bunch og bigjoiner special casing.
I've occasionally pondered about going even furher here and
doing the pre_plane_update() stuff for all pipes first, then
actually disabling the planes, and finally running the rest
of the modeset sequence. This would potentially allow
parallelizing all the extra vblank waits across multiple pipes,
and would make the plane disable even more atomic. But let's
go one step a time here.
Cc: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211022103304.24164-4-ville.syrjala@linux.intel.com
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Disabling planes in the middle of the modeset seuqnece does not make
sense since userspace can anyway disable planes before the modeset
even starts. So when the modeset seuqence starts the set of enabled
planes is entirely arbitrary. Trying to sprinkle the plane disabling
into the modeset sequence just means more randomness and potential
for hard to reproduce bugs.
So it makes most sense to just disable all planes first so that the
rest of the modeset sequence remains identical regardless of which
planes happen to be enabled by userspace at the time.
This reverts commit 84030adb9e27d202a66022488bf0349a8bd45213.
Cc: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211022103304.24164-3-ville.syrjala@linux.intel.com
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
PSR2 apparently requires some planes to be enabled for some
silly reason, and so we are now trying to turn PSR off before
planes go off. Except during a full modeset that is handled
less clearly through reorganization of the modeset sequence.
That is not great as it makes the code mode complex, and
prevents us from doing nice things such as just turning off
all the planes at the very start of the modeset. So let's
move the PSR pre_plane_update() thing to a spot where it
will handle both full modesets and everything else.
Cc: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211022103304.24164-2-ville.syrjala@linux.intel.com
Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
The asm/iosf_mbi.h header is x86-only. Let's make IOSF_MBI kconfig
selection conditional to x86 and provide a header with stubs for other
architectures. This helps getting i915 available for other
architectures in future.
Signed-off-by: Mullati, Siva <siva.mullati@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211022192756.1228354-1-siva.mullati@intel.com
Alderlake-P was getting 'max time under evasion' messages when PSR2
is enabled, this is due PIPE_SCANLINE/PIPEDSL returning 0 over a
period of time longer than VBLANK_EVASION_TIME_US.
For PSR1 we had the same issue so intel_psr_wait_for_idle() was
implemented to wait for PSR1 to get into idle state but nothing was
done for PSR2.
For PSR2 we can't only wait for idle state as PSR2 tends to keep
into sleep state(ready to send selective updates).
Waiting for any state below deep sleep proved to be effective in
avoiding the evasion messages and also not wasted a lot of time.
v2:
- dropping the additional wait_for loops, only the _wait_for_atomic()
is necessary
- waiting for states below EDP_PSR2_STATUS_STATE_DEEP_SLEEP
v3:
- dropping intel_wait_for_condition_atomic() function
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211005231851.67698-1-jose.souza@intel.com
The intermediate value 1000000 * 10 * 9671 overflows 32 bits, so force
promotion to a bigger type.
From the logs:
[drm:intel_dp_compute_config [i915]] DP link rate required 3657063 available -580783288
v2: Use mul_u32_u32() (Ville)
Fixes: 48efd014f0ea ("drm/i915/dp: add max data rate calculation for UHBR rates")
Cc: Manasi Navare <manasi.d.navare@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211026093407.11381-1-jani.nikula@intel.com
8b/10b encoding format requires to reserve the first slot for
recording metadata. Real data transmission starts from the second slot,
with a total of available 63 slots available.
In 128b/132b encoding format, metadata is transmitted separately
in LLCP packet before MTP. Real data transmission starts from
the first slot, with a total of 64 slots available.
v2:
* Move total/start slots to mst_state, and copy it to mst_mgr in
atomic_check
v3:
* Only keep the slot info on the mst_state
* add a start_slot parameter to the payload function, to facilitate non
atomic drivers (this is a temporary workaround and should be removed when
we are moving out the non atomic driver helpers)
v4:
*fixed typo and formatting
v5: (no functional changes)
* Fixed formatting in drm_dp_mst_update_slots()
* Reference mst_state instead of mst_state->mgr for debugging info
Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Fangzhi Zuo <Jerry.Zuo@amd.com>
[v5 nitpicks]
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211025223825.301703-3-lyude@redhat.com
If we want to return from for_each_intel_connector_iter(), one
way is calling drm_connector_list_iter_end() before returning
to avoid memleak. The other way is just breaking from the bracket
and then returning after the outside drm_connector_list_iter_end().
Obviously, the second way makes code smaller and more clear.
Apply it to the function intel_dp_mst_atomic_master_trans_check().
Signed-off-by: He Ying <heying24@huawei.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211022022243.138860-1-heying24@huawei.com
Add the const that was accidentally left out from the vtables.
Fixes: 6b4cd9cba620 ("drm/i915: constify the cdclk vtable")
Cc: Dave Airlie <airlied@redhat.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211021133408.32166-1-jani.nikula@intel.com
We left the definition IS_CANNONLAKE() macro while removing it from the
tree due to having to merge the changes in different branches. Now that
everything is back in sync and nobody is using IS_CANNONLAKE(), we can
safely ditch it.
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211021181847.1543341-1-lucas.demarchi@intel.com
UAPI Changes:
- Expose multi-LRC submission interface
Similar to the bonded submission interface but simplified.
Comes with GuC only implementation for now. See kerneldoc
for more details.
Userspace changes: https://github.com/intel/media-driver/pull/1252
- Expose logical engine instance to user
Needed by the multi-LRC submission interface for GuC
Userspace changes: https://github.com/intel/media-driver/pull/1252
Driver Changes:
- Fix blank screen booting crashes when CONFIG_CC_OPTIMIZE_FOR_SIZE=y (Hugh)
- Add support for multi-LRC submission in the GuC backend (Matt B)
- Add extra cache flushing before making pages userspace visible (Matt A, Thomas)
- Mark internal GPU object pages dirty so they will be flushed properly (Matt A)
- Move remaining debugfs interfaces i915_wedged/i915_forcewake_user into gt (Andi)
- Replace the unconditional clflushes with drm_clflush_virt_range() (Ville)
- Remove IS_ACTIVE macro completely (Lucas)
- Improve kerneldocs for cache_dirty (Matt A)
- Add missing includes (Lucas)
- Selftest improvements (Matt R, Ran, Matt A)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/YXFmLKoq8Fg9JxSd@jlahtine-mobl.ger.corp.intel.com
