IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
Now we have more fine-grained power controls in each kcontrol ops, the
coarse checks of snd_power_wait() in a few control ioctls became
superfluous. Let's drop them.
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Link: https://lore.kernel.org/r/20210523090920.15345-4-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Although the power state check is performed in various places (e.g. at
the entrance of quite a few ioctls), there can be still some pending
tasks that already went into the ioctl handler or other ops, and those
may access the hardware even after the power state check. For
example, kcontrol access ioctl paths that call info/get/put callbacks
may update the hardware registers. If a system wants to assure the
free from such hw access (like the case of PCI rescan feature we're
going to implement in future), this situation must be avoided, and we
have to sync such in-flight tasks finishing beforehand.
For that purpose, this patch introduces a few new things in core code:
- A refcount, power_ref, and a wait queue, power_ref_sleep, to the
card object
- A few new helpers, snd_power_ref(), snd_power_unref(),
snd_power_ref_and_wait(), and snd_power_sync_ref()
In the code paths that call kctl info/read/write/tlv ops, we check the
power state with the newly introduced snd_power_ref_and_wait(). This
function also takes the card.power_ref refcount for tracking this
in-flight task. Once after the access finishes, snd_power_unref() is
called to released the refcount in return. So the driver can sync via
snd_power_sync_ref() assuring that all in-flight tasks have been
finished.
As of this patch, snd_power_sync_ref() is called only at
snd_card_disconnect(), but it'll be used in other places in future.
Note that atomic_t is used for power_ref intentionally instead of
refcount_t. It's because of the design of refcount_t type; refcount_t
cannot be zero-based, and it cannot do dec_and_test() call for
multiple times, hence it's not suitable for our purpose.
Also, this patch changes snd_power_wait() to accept only
SNDRV_CTL_POWER_D0, which is the only value that makes sense.
In later patch, the snd_power_wait() calls will be cleaned up.
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Link: https://lore.kernel.org/r/20210523090920.15345-3-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
We need proper barriers to handle the power state change of the card
from different CPUs.
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Link: https://lore.kernel.org/r/20210523090920.15345-2-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
sound/usb/mixer_scarlett_gen2.c:2000:5: warning: symbol 'snd_scarlett_gen2_controls_create' was not declared. Should it be static?
Fixes: 265d1a90e4fb ("ALSA: usb-audio: scarlett2: Improve driver startup messages")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: kernel test robot <lkp@intel.com>
Link: https://lore.kernel.org/r/20210522180900.GA83915@f59a3af2f1d9
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The Lenovo Yoga 9i has bass speaker, but the bass speaker can't work,
that is because there is an i2s amplifier on that speaker, need to
run ideapad_s740_coef() to initialize the amplifier.
And also needs to apply ALC285_FIXUP_THINKPAD_HEADSET_JACK to rename
the speaker's mixer control name, otherwise the PA can't handle them.
BugLink: http://bugs.launchpad.net/bugs/1926165
Signed-off-by: Hui Wang <hui.wang@canonical.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210522042645.14221-1-hui.wang@canonical.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
On some ASUS and MSI machines, the audio codec is alc1220 and the
Headphone is connected to audio mixer 0xf and DAC 0x5, in theory
the Headphone volume is controlled by DAC 0x5 (Heapdhone Playback
Volume), but somehow it is controlled by DAC 0x2 (Front Playback
Volume), maybe this is a defect on the codec alc1220.
Because of this issue, the PA couldn't switch the headphone and
Lineout correctly, If we apply the quirk CLEVO_P950 to those machines,
the Lineout and Headphone will share the audio mixer 0xc and DAC 0x2,
and generate Headphone+LO mixer, then PA could handle them when
switching between them.
BugLink: https://gitlab.freedesktop.org/pipewire/pipewire/-/issues/1206
Cc: <stable@vger.kernel.org>
Signed-off-by: Hui Wang <hui.wang@canonical.com>
Link: https://lore.kernel.org/r/20210522034741.13415-1-hui.wang@canonical.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
In later commit, transfer delay is used in both IR and IT contexts. This
commit refactors regardless of transfer delay.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20210522013303.49596-7-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Current implementation pools the sequence in AMDTP domain. This is convenient
regarding to memory usage and computation time, however inconvenient for the
devices such that several rx streams are expected to transfer timing
information independently.
This commit refactors to pool the sequence per rx packet stream.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20210522013303.49596-3-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Many devices are unaware of syt field in rx CIP for playback timing.
This commit adds a flag to cancel processing syt field. Actually,
syt calculation is required to decide the number of events per rx packet.
The flag put 0xffff to CIP header of rx packet. On the other hand,
The value of syt field in CIP header of tx packet is unavailable. The
sequence of packet descriptor for tx packet includes 0 for the offset
of syt field to avoid computation.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20210522013303.49596-2-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The check of error is just done for the case that CIP header is available.
This commit moves auto variable into the branch to process CIP header.
Addresses-Coverity: ("Uninitialized scalar variable")
Fixes: c09010eeb373 ("ALSA: firewire-lib: handle the case that empty isochronous packet payload for CIP")
Suggested-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20210520130409.GA170303@workstation
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Add separate init function to call the existing controls_create
function so a custom error can be displayed if initialisation fails.
Use info level instead of error for notifications.
Display the VID/PID so device_setup is targeted to the right device.
Display "enabled" message to easily confirm that the driver is loaded.
Signed-off-by: Geoffrey D. Bennett <g@b4.vu>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/b5d140c65f640faf2427e085fbbc0297b32e5fce.1621584566.git.g@b4.vu
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Use usb_rcvctrlpipe() not usb_sndctrlpipe() for USB control input in
the Scarlett Gen 2 mixer driver. This fixes the device hang during
initialisation when used with the ehci-pci host driver.
Fixes: 9e4d5c1be21f ("ALSA: usb-audio: Scarlett Gen 2 mixer interface")
Signed-off-by: Geoffrey D. Bennett <g@b4.vu>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/66a3d05dac325d5b53e4930578e143cef1f50dbe.1621584566.git.g@b4.vu
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The direction of the pipe argument must match the request-type direction
bit or control requests may fail depending on the host-controller-driver
implementation.
Fix the UAC2_CS_CUR request which erroneously used usb_sndctrlpipe().
Fixes: 93db51d06b32 ("ALSA: usb-audio: Check valid altsetting at parsing rates for UAC2/3")
Cc: stable@vger.kernel.org # 5.10
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://lore.kernel.org/r/20210521133742.18098-1-johan@kernel.org
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The cur variable indicating the currently selected clock source can be
theoretically used as uninitialized after the recent commit
481f17c41803 ("ALSA: usb-audio: Handle error for the current selector
gracefully"). For addressing it, initialize it before use.
Also, one place seems setting 0 to a wrong variable ret, instead of
cur; otherwise it makes little sense. Since the initialization is
done beforehand, we can get rid of this line, too.
Fixes: 481f17c41803 ("ALSA: usb-audio: Handle error for the current selector gracefully")
Reported-by: Colin Ian King <colin.king@canonical.com>
Link: https://lore.kernel.org/r/4b261d68-f53f-240d-2d8a-2f88b337849d@canonical.com
Link: https://lore.kernel.org/r/s5hfsyhh97t.wl-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This driver spits out a warning for me at boot:
sc7180-lpass-cpu 62f00000.lpass: asoc_qcom_lpass_cpu_platform_probe() error getting optional null: -2
but it looks like it is all an optional clk. Use the optional clk APIs
here so that we don't see this message and everything else is the same.
Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Cc: Banajit Goswami <bgoswami@codeaurora.org>
Fixes: 3e53ac8230c1 ("ASoC: qcom: make osr clock optional")
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20210520014807.3749797-1-swboyd@chromium.org
Signed-off-by: Mark Brown <broonie@kernel.org>
This error path returns zero (success) but it should return -EINVAL.
Fixes: 3333cb7187b9 ("ASoC: cs35l33: Initial commit of the cs35l33 CODEC driver.")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/YKXuyGEzhPT35R3G@mwanda
Signed-off-by: Mark Brown <broonie@kernel.org>
When starting AMDTP domain, tasks in process context yields running CPU
till all of isochronous context get callback, with an assumption that
it's OK to process content of packet.
However several isochronous cycles are skipped to transfer rx packets, or
the content of rx packets are dropped, to manage the timing to start
processing the packets.
This commit changes the timing for tasks in process context to wake up
when processing content of packet is actually ready.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20210520040154.80450-9-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>
DICE ASICs support several pairs of isochronous packet streaming and
expect software to queue packets with the same timing information into
the same isochronous cycle.
This commit adds structure member to manage the cycle to start
processing packet in several IT contexts. The cycle is decided when
batch of isochronous cycle is skipped in callback to isochronous context
for IRQ target.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20210520040154.80450-8-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>
It's several hundred cycles from starting isochronous contexts and the
actual cycle to start processing content of packet. It's useless to
start the context for IRQ target apart from the other contexts.
This commit refactors helper function to start AMDTP domain in the point.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20210520040154.80450-7-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Current implementation of ALSA IEC 61883-1/6 packet streaming engine
allows drivers to decide isochronous cycle to start IR context. This
option is mainly used to avoid processing the sequence of packet with
some quirks; e.g. discontinuity of counter. However, it's inconvenient
to fail to continue packet processing when the target device doesn't
start transmission of packet till the decided cycle.
This commit changes the behaviour. As an alternative to the start cycle
for IR context, the cycle count to drop content of packet in the beginning
of IR context.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20210520040154.80450-6-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>
DICE ASICs support several pairs of isochronous packet streaming. It's
convenient for drivers to process content of the packet in the same cycle
timing.
This commit adds structure member to manage the cycle to start
processing packet in several IR contexts. The cycle is decided in the
first callback of the IR contexts. The content of packet is dropped
till the cycle.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20210520040154.80450-5-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>
It's convenient to calculate the size of context payload apart from
the size of isochronous packet payload.
This commit adds a helper function for it.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20210520040154.80450-3-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The initialization of MIDI devices that are found on some LINE6
drivers are currently done in a racy way; namely, the MIDI buffer
instance is allocated and initialized in each private_init callback
while the communication with the interface is already started via
line6_init_cap_control() call before that point. This may lead to
Oops in line6_data_received() when a spurious event is received, as
reported by syzkaller.
This patch moves the MIDI initialization to line6_init_cap_control()
as well instead of the too-lately-called private_init for avoiding the
race. Also this reduces slightly more lines, so it's a win-win
change.
Reported-by: syzbot+0d2b3feb0a2887862e06@syzkallerlkml..appspotmail.com
Link: https://lore.kernel.org/r/000000000000a4be9405c28520de@google.com
Link: https://lore.kernel.org/r/20210517132725.GA50495@hyeyoo
Cc: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210518083939.1927-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Currently we bail out when the device returns an error or an invalid
value for the current clock selector value via
uac_clock_selector_get_val(). But it's possible that the device is
really uninitialized and waits for the setup of the proper route at
first.
For handling such a case, this patch lets the driver dealing with the
error or the invalid error more gracefully, choosing the clock source
automatically instead.
Link: https://lore.kernel.org/r/20210518152112.8016-3-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This patch just does refactoring of the UAC2/3 clock setup code.
There should be no functional changes. The major changes are:
* Provide union objects for pointing both UAC2 and UAC3 objects
* Unify clock source, selector and multiplier helper functions
* Unify __uac_clock_find_source() to deal with both UAC2 and UAC3
equally
Link: https://lore.kernel.org/r/20210518152112.8016-2-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The array bounds check on clock_names is currently checking the size
of the entire array rather than the number of elements in the array
leading to a potential array bounds read error. Fix this by using
the ARRAY_SIZE macro instead of sizeof.
Addresses-Coverity: ("Out-of-bounds read")
Fixes: 08fdced60ca0 ("ALSA: rawmidi: Add framing mode")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Link: https://lore.kernel.org/r/20210519105424.55221-1-colin.king@canonical.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
BE hw_params op was recently added for SSP type DAIs.
But sending the DAI_CONFIG IPC during hw_params
is not supported with older firmware. So add an ABI check
to avoid sending the IPC if the firmware ABI is older than
3.18.
Fixes: e12be9fbfb91 ('ASoC: SOF: Intel: HDA: add hw params callback for SSP DAIs')
Tested-by: Yong Zhi <yong.zhi@intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20210518174121.151601-1-ranjani.sridharan@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This commit fulfils sequence descriptors for skipped cycle when
it's one cycle. This is preparation for future integration.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20210518130048.146596-9-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Within devices supported by drivers in ALSA firewire stack, OXFW-based
devices and Fireface devices are known to skip isochronous cycle for
packet transmission. The former is due to the jumbo payload quirk. The
latter is due to vendor protocol in which empty packet is not
transferred in blocking mode.
Although nothing to do just for handling events of the packet, packet
continuity is necessarily for media clock recovery. This commit checks
whether any cycle is continue or not.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20210518130048.146596-8-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Some macros and functions are renamed so that they compute isochronous
cycle within maximum count of second in isochronous context of 1394
OHCI.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20210518130048.146596-5-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Two quadlets are at least included in isochronous packet payload for
Common Isochronous Packet (CIP) format in IEC 61883-1. However, it's
better to equip ALSA IEC 61883-1/6 packet streaming engine for contrary
packet.
This commit handles isochronous cycle to process such packet so that the
cycle is skipped.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20210518130048.146596-3-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>
ALSA OXFW supports two types of ASICS; OXFW970 and OXFW971. The former
is known to have a quirk we call 'jumbo payload' that some isochronous
cycles are skipped to transfer isochronous packets during handling
asynchronous transaction. The quirk seems to correspond to firmware
initially delivered by Oxford Semiconductor since the quirk is not
confirmed for Mackie Onyx Satellite in which the revised firmware is
available. The quirk is not confirmed in the latter.
This commit adds code comment to describe the quirk.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20210518084557.102681-8-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Loud Technologies Mackie Onyx Satellite is identified as the model with
OXFW970 ASIC.
This commit adds explicit entry for the model.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20210518084557.102681-7-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Loud Technologies Tapco Link.FireWire 4x6 is identified as the model
with OXFW970 ASIC.
This commit adds explicit entry for the model.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20210518084557.102681-6-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>
