IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
The widget layout of the Fujitsu Lifebook S6420 (which is ICH9M-based
and uses an ALC269) is similar but not identical to the Lifebook
S6410/E8410 (which are ICH8M-based and use an ALC262).
It is named lifebook as fujitsu is in use for Amilo machines. This builds
on the Quanta FL1 work and supports all analog inputs & outputs that I am
aware of. Microphone autoswitch is implemented. The laptop mic port takes
precedence over the dock mic port if both happen to have a jack plugged in.
This made sense to me as a design decision (imagine a presentation
environment with the dock fully wired in and the presenter quickly wanting
to override the mic with a headset).
There is mention of a digital audio path on the codec graph, so perhaps
the headphone socket is dual-function analog/digital. I will follow up
with another patch if I can acquire equipment to test this.
Signed-off-by: Tony Vroon <tony@linx.net>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
When an error occurs during the codec probing, typically accessing to an
non-existing codec slot, the controller chip gets often screwed up and
can no longer communicate with the codecs.
This patch adds a preparation phase just to probe codec addresses before
actually creating codec instances. If any error occurs during this
probing phase, the driver resets the controller to recover.
This will (hopefully) fix the famous "single_cmd" errors.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The hda_bus ops callback take struct hda_bus pointer.
Also, the command callback takes the composed command word, instead of
each small bits in arguments.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
There are actually two variants of ALC268 Acer implementation, one
with an analog built-in mic (pin 0x19) and another with a digital
mic (pin 0x12). Created a new model, acer-dmic, for the latter case
now.
So far, all known models are assigned to be analog-mic, according to
the BIOS setup. If this doesn't match with the actual case, one needs
to try model=acer-dmic, and fix the entry to point ALC268_ACER_DMIC
if it works.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Asus V1s series laptops have an ALC660VD with PCI id: 0x1043, 0x1633.
1.) remove the previous behaviour of mapping that to the ALC861VD_LENOVO
device.
2.) add a new ALC660VD_V1S device based on ALC861VD_LENOVO, with an
added digital out.
Signed-off-by: Tristan Aston <astrotris@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Add a proper ifdef to shut out a compile warning:
CC [M] sound/pci/hda/patch_intelhdmi.o
sound/pci/hda/patch_intelhdmi.c:286: warning: ‘hdmi_get_dip_index’ defined but \
not used
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Due to the hda-reconfiguration patches, the check of empty stream
is gone, and this results in an error with the codec setup with empty
streams.
This patch adds the check again to avoid the error at probing.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Add NULL-check of the return value of snd_kctl_new1() before
accessing it. Also, make a sanity NULL check to snd_BUG_ON()
for debugging only.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Add support for explicitly enabling the EQ distortion hack for
systems without software biquad support.
Signed-off-by: Matthew Ranostay <mranostay@embeddedalley.com>
Cc: stable@kernel.org
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Added a quirk for another Acer Aspier laptop (1025:0090) with ALC883
codec. Reported in Novell bnc#426935:
https://bugzilla.novell.com/show_bug.cgi?id=426935
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Unified the capture mixer creation in patch_realtek.c.
ALC268 is still an exception since it has no AMP in ADC but in
MUX widget.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Unify the capture callbacks in patch_realtek.c.
The difference of matrix or mux style is checked via spec->is_mix_capture
flag.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The digital mic wasn't detected properly for ALC269 auto-probing mode
because of its widget number. Fixed now.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The recent addition of automatic mic-muting is broken in some cases.
The code assumes that the pin nids <= 0x18, but the digital pins can
be less than 0x18.
Also, it assumes the front-mic being the internal mic, but it depends
on the hardware implementation actually.
Instead of complex case-fixes, better to disable the code as now.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The current snd-hda-intel driver seems blocking the power-off on some
devices like eeepc. Although this is likely a BIOS problem, we can add
a workaround by disabling IRQ lines before power-off operation.
This patch adds the reboot notifier to achieve it.
The detailed problem description is found in bug#11889:
http://bugme.linux-foundation.org/show_bug.cgi?id=11889
Tested-by: Luiz Fernando N. Capitulino <lcapitulino@mandriva.com.br>
Cc: stable@kernel.org
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The SPDIF mute switch code seems broken. It doesn't set unmute bits
properly. Also it contains the duplicated lines (merge error?) to be
cleaned up.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Add Wolfson Microelectronics to the HDA vendor ID table.
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Removed the old workaround to avoid the non-existing codec slot.
The current code should work without that workaround. If any,
we can add a quirk table.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Some machines have broken BIOS resume that doesn't restore the default
pin configuration properly, which results in a wrong detection of HP
pin. This causes a silent speaker output due to missing HP detection.
Related bug: Novell bug#406101
https://bugzilla.novell.com/show_bug.cgi?id=406101
This patch fixes the issue by saving/restoring the default pin configs
by the driver itself.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This patch adds support to the IDT codec families to report jack status
to the jack abstraction layer. This required some reorganization in the
stac92xx_unsol_event function in which the index value is changed to
reporting the nid with the event.
Also adds an sigmatel_jack struct to keep track of the nid relation
to the jack abstraction layer instance. Also adds functions to set and
retrieve data values for each nid, this is used in stac92xx_unsol_event
to retrieve the GPIO mask for STAC_VREF_EVENT.
Signed-off-by: Matthew Ranostay <mranostay@embeddedalley.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This patch adds snd_hda_get_jack* functions for reporting jack location,
device, and connectivity type.
Signed-off-by: Matthew Ranostay <mranostay@embeddedalley.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This patch duplicates the jack->id pointer with kstrdup() to prevent
scoping issues from calling autoprobing functions from the HDA section.
Signed-off-by: Matthew Ranostay <mranostay@embeddedalley.com>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This patch introduces support for reporting SW_LINEOUT_INSERT detection events
via the jack abstraction layer.
Also adds a SND_JACK_LINEOUT define to the input system header.
Signed-off-by: Matthew Ranostay <mranostay@embeddedalley.com>
Cc: Dmitry Torokhov <dtor@mail.ru>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
ALC260 auto-parsing mode may create multiple controls for the same volume
widget (0x08 and 0x09) depending on the pin. For example, Front and
Headphone volumes may control the same volume, just the latter one wins.
This patch adds a proper check of the existing of the volume control
and avoid the doulbed creation of the same volume controls.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The jack instance has to be release manually in free callback
in patch_sigmatel.c for dynamic reconfiguration.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Added support for jack detection reporting to userspace for
IDT/Sigmatel codecs.
Signed-off-by: Matthew Ranostay <mranostay@embeddedalley.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Added the support of ALC272 codec. It's almost compatible with ALC663.
Signed-off-by: Kailang Yang <kailang@realtek.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
ASUS M90V has PCI SSID 1043:1873. Corrected in the quirk list.
Signed-off-by: Kailang Yang <kailang@realtek.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Add the automatic mic switch via jack sensing in auto-probe mode
for Realtek codecs.
Signed-off-by: Kailang Yang <kailang@realtek.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Fixed compiler warning with possible uninitialized variable 'nid'.
CC [M] /home/mranostay/git/alsa-driver/pci/hda/patch_sigmatel.o
/home/mranostay/git/alsa-driver/pci/hda/../../alsa-kernel/pci/hda/patch_sigmatel.c: In function
‘stac92xx_parse_auto_config’:
/home/mranostay/git/alsa-driver/pci/hda/../../alsa-kernel/pci/hda/patch_sigmatel.c:2815: warning: ‘nid’ may be used
uninitialized in this function
Signed-off-by: Matthew Ranostay <mranostay@embeddedalley.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This patch adds the "hints" for reconfiguring codecs. The hints
are simply string arrays and can be freely used/parsed by the codec
patch. The hints can be input via hwdep sysfs files.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This patch enables the additional init verbs for each codec. The verbs
can be entered via hwdep sysfs file. These verbs are executed at
reconfiguring the codec for non-standard setups like overriding
the pin-defcfg.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Added the sysfs entries to hwdep devices so that the new features
like reconfiguration can be done via sysfs.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Added the reconfiguration feature of any individual codec.
Via the reconfiguration, the old resources are released and
the patch is called again to recreate the PCM and mixers in
addition to the re-initialization.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Manage all kcontrol elements created in the hda-intel driver.
This makes it possible to remove and reconfigure the controls
of each codec.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Corrected invalid mixer index values on the 92hd71bxxx codec branch.
Signed-off-by: Matthew Ranostay <mranostay@embeddedalley.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Add support for mixers on the analog mixer on some 92hd75xx codecs,
along with adding a 'Mixer' entry for it's connection on the dmux.
Signed-off-by: Matthew Ranostay <mranostay@embeddedalley.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Add support for powering down VREF on standard headphone insertion, also
powers up the VREF on a headset insertion.
Signed-off-by: Matthew Ranostay <mranostay@embeddedalley.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Set the third microphone to a default config of a 'Line In' to be
added the Input Source Mux's.
Signed-off-by: Matthew Ranostay <mranostay@embeddedalley.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Since there are now multiple OpenMoko platforms it is more important to
check that the machine driver is running on the correct system. This
was orgininally generated as part of the initial GTA02 machine port.
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Ingo reported Oops at probing mtpav driver. It's a race between
the irq handler and the rawmidi instance registration.
This patch fixes the order of registration to avoid the race.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Tested-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
The MIDI interfaces have to be detected dynamically for Edirol devices
ua-700, ua-25 and ua4-fx. This patch reverses the wrong changes made by
my other patch in uaxx-quirk.
Signed-off-by: Pedro Lopez-Cabanillas <pedro.lopez.cabanillas@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Added a note on the dependency of old RTC stuff, which is exclusive
with the new RTC class drivers.
http://bugme.linux-foundation.org/show_bug.cgi?id=11430
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Function dapm_mux_update_power needs enum index mux and register mask value val
as parameters, but it only has a parameter val, and uses it as both val and mux.
snd_soc_test_bits(widget->codec, e->reg, mask, val) val is register mask here,
e->texts[val] but val should be enum index mux here.
This patch adds a new param mux to fix it.
Signed-off-by: Richard Zhao <linuxzsc@gmail.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Mic PGA Switch should be inverted in the WM8510 driver but isn't.
Reported-by: ext-jukka.hynninen@vaisala.com
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
fix a typo in comment for is_in_nid_list().
Signed-off-by: Wu Fengguang <wfg@linux.intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
fix a typo in comment for process_unsol_events().
Signed-off-by: Wu Fengguang<wfg@linux.intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
The PCI SSID for ASROCK mobo in commit
ac56445dd6a38a36c2fa91989f5f6220a9bdf97c is wrong.
This patch fixes to the correct one, 1849:3662.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Renamed the old quirk function for ua-700/ua-25 to become more
generic, moving the MIDI interfaces to the quirk data header.
Added a new quirk for the Edirol UA-4FX.
Signed-off-by: Pedro Lopez-Cabanillas <pedro.lopez.cabanillas@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
The endpoints should be released immediately at disconnection
rather than the delayed release. This could be a reason of Oops
at USB-audio device disconnection being used.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
I recently got a chance to play with two boards with ALC662 rev1:
* BIOSTAR TA780G M2+
* ASROCK K10N78FullHD-hSLI R3.0
Both use 3 stack, 6ch mode with digital out. Since autodetection isn't able
to figure that out from BIOS, we need to specify that manually.
Signed-off-by: Vedran Miletic <rivanvx@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
This patch adds PCI IDs for:
* TerraTec DMX XFire 1024
* Hercules Gamesurround Fortissimo II
* Hercules Gamesurround Fortissimo III 7.1
All those cards were supported as generic CS46xx device,
so they will work as before. I'm pretty sure that first two
cards work, as they have same hardware design as reference
card. Not sure about Fortissimo III, but this won't break it
if it worked.
Tested on TerraTec DMX XFire 1024.
Signed-off-by: Vedran Miletic <rivanvx@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Added support for muting S/DPIF outs using the 'Digital Playback Source' muxs on
supporting codecs.
Signed-off-by: Matthew Ranostay <mranostay@embeddedalley.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
The AppleTV needs the same handling as the 24" iMac.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Use 3stack-6ch-dig ALC662 model for Foxconn 45CMX/45GMX/45CMX-K motherboard.
Signed-off-by: Herton Ronaldo Krzesinski <herton@mandriva.com.br>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Use 3stack-6ch-dig ALC662 model for Gigabyte 945GCM-S2L motherboard.
Signed-off-by: Herton Ronaldo Krzesinski <herton@mandriva.com.br>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
The test (ssc != NULL) can only be reached if the call to the function
ssc_request, the result of which ssc is assigned, succeeds. Moreover,
two statements assign NULL to ssc just before a return, which is useless
since it is a local variable. So, we suggest to delete the test and
the two assignments.
A simplified version of the semantic match that finds this problem is
as follows:
(http://www.emn.fr/x-info/coccinelle/)
// <smpl>
@bad_null_test@
expression x,E;
@@
x = ssc_request(...)
... when != x = E
* x != NULL
// </smpl>
Signed-off-by: Julien Brunel <brunel@diku.dk>
Signed-off-by: Julia Lawall <julia@diku.dk>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Added HP laptop SND_PCI_QUIRK for STAC_HP_M4.
Signed-off-by: Matthew Ranostay <mranostay@embeddedalley.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Add support for S/PDIF IN on reference boards quirks. Also disable the
IEC958 capture switch on boards with GPIO0 enabled.
Signed-off-by: Matthew Ranostay <mranostay@embeddedalley.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Add support for the E-Mu "Tracker Pre" USB sound card, following
the example of the (very similar) E-Mu 0202 and E-Mu 0404 USB.
As with the 0202 and 0404 USB, functionality is very limited:
just a couple of sample rates, no volume/mute control, etc.
Signed-off-by: Eran Tromer <eran@tromer.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
When read RIRB buffer immediately after RIRB interrupt received,
sometimes the data will be "0x0". If we wait for some time, the data
in buffer will be correct. This issue only occurred with AMD Phenom cpu.
So we set this "needs_damn_long_delay" flag.
Signed-off-by: Wei Ni <wni@nvidia.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Add NVIDIA HDMI HD-audio codec support in snd-hda-intel driver,
include NVIDIA MCP78/7A HDMI.
Signed-off-by: Wei Ni <wni@nvidia.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
The recent slave_dig_out addition has some rooms to clean up.
Also it doesn't call snd_hda_cleanup_stream() properly for slaves
at closing. The patch fixes both issues.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Removed invalid references to slave_dig_outs inside the S/PDIF IN capture switch
control. Beforehand this was basically a mute switch for the S/PDIF outs as well.
Signed-off-by: Matthew Ranostay <mranostay@embeddedalley.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Patch allows the last DAC in the dac_nids for the hp_nid if there is an
available one this isn't in use by a line_out entry or if hp_nid isn't already
defined. This solves the issues with the 'Headphone Playback' mixer
controls on the 92hd73xxx branch and possibly others.
Signed-off-by: Matthew Ranostay <mranostay@embeddedalley.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
After sending a reset command to the UART, wait some time for the ACK to
be generated (and to be read and dropped by the interrupt handler)
before sending the next command.
Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Convert the tlv320aic3x codec driver to the new (standard) device
driver binding model.
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Cc: Vladimir Barinov <vbarinov@ru.mvista.com>
Tested-by: Jarkko Nikula <jarkko.nikula@nokia.com>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
In previous change "[ALSA] hda-codec - Fix ALC662 DAC mixer mutes", I
missed to fix the mixer mute switches also for the auto config model of
ALC662. Now mute for mixer items "Front", "Surround", "Center" and "LFE"
when available will work too with "auto" model.
Signed-off-by: Herton Ronaldo Krzesinski <herton@mandriva.com.br>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
This seems to work if I tell it that it's a mbp3. Not sure if there are
actually any differences.
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Corrected bounds-checking in stac92xx_auto_create_mux_input_ctls() and added a spec->spdif_labels
pointer for custom SPDIF mux labels for non-standard codec connections.
Signed-off-by: Matthew Ranostay <mranostay@embeddedalley.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Implement SPI support for WM8750, cut'n'pasting from the support for
WM8731 contributed by Cliff Cai and Alan Horstmann since the wire format
is the same for both codecs.
Also fix a cut'n'pasted comment in the I2C side of the driver (which was
clearly written in the same way) while we're at it.
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
The stereo ADC in the WM9713 can be used to produce data for both the
standard AC97 interface and the additional voice PCM interface. Support
use on both by defining virtual ADCs tied to each accepting the output
from the actual ADCs.
Reported-by: Rodolfo Giometti <giometti@enneenne.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
When built with AC97 support the ASoC core depends on AC97_BUS so force
it to be available Kconfig.
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
VT1708S' Mic Boost should be hidden in hardware design according to some
customers' requirements. However, in case of bugs, it has to be exhibited to
normal users, so we need to:
* open a software backdoor, which is disabled by default in hardware
* re-write .tlv & .info, to indicate the actual necessary info, which we cannot
get from amplifier's capabiliies
Signed-off-by: Logan Li <LoganLi@viatech.com.cn>
Signed-off-by: Harald Welte <HaraldWelte@viatech.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
As it seems, the recently-sent patch for the 2nd S/PDIF (HDMI) output
is not working with alsa-kernel 1.0.18rc3.
This patch makes it work by
* activating the second S/PDIF output pin in the pin config
* consolidating the dig_playback_pcm_prepare() with extra_dig_pcm_prepare()
functions
* remove the need for an extra hda_pcm_stream structure and rather represents
the second digital output as substream within the primary S/PDIF digital out
stream.
Signed-off-by: Logan Li <LoganLi@viatech.com.cn>
Signed-off-by: Harald Welte <HaraldWelte@viatech.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Don't enumerate via_hp_mixer while hp_mux is null (headphone does not exist),
to fix the crash of via_independent_hp_info (via_hp_mixer's .info), which will
reference hp_mux.
Signed-off-by: Logan Li <LoganLi@viatech.com.cn>
Signed-off-by: Harald Welte <HaraldWelte@viatech.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
ASoC and non-ASoC drivers for PCM DMA on PXA share lots of common code.
Move it to pxa2xx-lib.
[Fixed some checkpatch warnings -- broonie]
Signed-off-by: Dmitry Baryshkov <dbaryshkov@gmail.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Support building of pxa2xx-ac97-lib for several CPUs by making code
run-time selected, not only compile-time.
[Fixed 3XX->3xx typos in ifdef checks -- broonie.]
Signed-off-by: Dmitry Baryshkov <dbaryshkov@gmail.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
ASoC and non-ASoC drivers for ACLINK on PXA share lot's of common code.
Move all common code into separate module snd-pxa2xx-lib.
[Fixed handing of SND_AC97_CODEC in Kconfig and some checkpatch warnings
-- broonie]
Signed-off-by: Dmitry Baryshkov <dbaryshkov@gmail.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Signed-off-by: Dmitry Baryshkov <dbaryshkov@gmail.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
The WM8971 is a low power, high quality stereo codec designed for
portable digital audio applications.
This driver was originally written by Kenneth Kiraly. While out of tree
it has had updates to reflect current kernel APIs and coding standards
from Graeme Gregory and Mark Brown.
Signed-off-by: Kenneth Kiraly <kiraly@lab126.com>
Signed-off-by: Liam Girdwood <lg@opensource.wolfsonmicro.com>
Signed-off-by: Graeme Gregory <gg@opensource.wolfsonmicro.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Use 6STACK_DIG for the AD2000BX variant of the AD1989B chip used by Asus
on their Asus P5Q Premium and Pro boards.
Signed-off-by: Robin H. Johnson <robbat2@gentoo.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Implement the slave_dig_outs for AD1989 cards. Untested due to lack of
hardware.
Signed-off-by: Robin H. Johnson <robbat2@gentoo.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
The Pincap output had a typod format specifier, leading to an extraneous "08"
in the output, which is a reserved bit of the Vref field, and was really
confused :-).
Signed-off-by: Robin H. Johnson <robbat2@gentoo.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Explain some of the magic numbers I saw while trying to fix the AD1989 SPDIF
issue. Maybe should just use the expanded form directly in the verbs?
Signed-off-by: Robin H. Johnson <robbat2@gentoo.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
The SPDIF pins for AD1989 are not enabled by default. Set OUT bit so that they
actually work. Also initialize the HDMI SPDIF at the same time.
Signed-off-by: Robin H. Johnson <robbat2@gentoo.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Added support for defining the number of amps and the creation
of the private_dimux dynamically for the 92hd73xx codec family.
Signed-off-by: Matthew Ranostay <mranostay@embeddedalley.com>
[Fixed a typo by tiwai]
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Don't use __init but __devinit to define probe function. A pointer to
snd_aica_probe is passed to the core via platform_driver_register and so the
function must not disappear after the module is loaded. Using __init
and having HOTPLUG=y and SND_AICA=m the following probably oopses:
echo -n AICA > /sys/bus/platform/driver/AICA/unbind
echo -n AICA > /sys/bus/platform/driver/AICA/bind
Strange enough add_aicamixer_controls which is only called by
snd_aica_probe was already using __devinit.
While at it move the remove function to .devexit.text section.
Signed-off-by: Uwe Kleine-König <ukleinek@informatik.uni-freiburg.de>
Cc: Adrian McMenamin <adrian@mcmen.demon.co.uk>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: Jaroslav Kysela <perex@perex.cz>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
This patch sets the HP out not used by the "Headphone to Line Out" switch to the
hp_nid.
Signed-off-by: Matthew Ranostay <mranostay@embeddedalley.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Added support for controlling hardware gain amps on input ports
using a volume control mixer with a mux selecting the port being controlled.
Signed-off-by: Matthew Ranostay <mranostay@embeddedalley.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Added a new quirk for STAC_HP_M4 series for an 92hd75xxx family laptop.
Signed-off-by: Matthew Ranostay <mranostay@embeddedalley.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Many places fail to check if codec has slave_dig_outs entries (the most common
case is not having any entry), leading to various possible oopses in hda_codec
code.
Signed-off-by: Herton Ronaldo Krzesinski <herton@mandriva.com.br>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Ensure wm8731_spi_write byte order is consistent regardless of
endianess.
Signed-off-by: Alan Horstmann <gineera@aspect135.co.uk>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Rename the first PCM device from "Analog" to "Multichannel" because it
can be used for HDMI output on the Xonar HDAV.
Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Rename the callback function that switches between line and mic inputs
on the Xonar D1 because it is also usable on other models.
Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Do not use a hardcoded number when iterating over the PCM1796 DACs to
allow for cards with a different number of analog output channels.
Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Introduce some trivial functions to better document the relationships of
the various model callbacks.
Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Add functions to allow model drivers to communicate with external chips
by doing I/O with the not-used-for-MIDI UART.
Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
To enable the MIDI port, model drivers must now set flags in
device_config, not only in misc_flags. This allows model drivers to
enable the UART without creating an ALSA MIDI device.
Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Rename the pcm_dev_cfg field to device_config because there will be
additional flags that do not describe PCM devices.
Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Factor out the common code of the mixer callbacks that handle controls
that just switch a single GPIO bit.
Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
The Xonar D2X and DX are very similar to the D2 and D1, respectively, so
we can handle the differences dynamically instead of using a separate
model structure for each one.
Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Handle the differences between the X-Meridian and the other models in
the probe callback instead of using a second model structure.
Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Introduce symbols that indicate the two models handled by the snd-oxygen
driver, instead of using a magic number.
Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Add a probe callback to the model structure so that model-specific
drivers can refine their model detection before the card is initialized.
Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Put a copy of the model structure into the chip structure so that model-
specific drivers can modify it depending on a particular device
instance.
Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
When setting the SPDIF channel status sample rate field, use the
recently defined symbols instead of magic numbers.
Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
The VT1702 and VT1708S have a second S/PDIF output which is used to
connect to a HDMI transmitter. This patch adds support for it.
Signed-off-by: Harald Welte <HaraldWelte@viatech.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
This mode allows an output stream to have two substreams, one for the
speakers and one for the headphone. Each of the substreams has independent
PCM data and uses a different DAC.
Signed-off-by: Harald Welte <HaraldWelte@viatech.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
The VT1702 and VT1708S codecs are new HDA codecs by VIA.
This patch adds support for them to the patch_via.c file for HDA
Signed-off-by: Harald Welte <HaraldWelte@viatech.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
In the current driver, there is a consistent mistake between the SURROUND and
the SIDE channels. This patch fixes it.
Signed-off-by: Harald Welte <HaraldWelte@viatech.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
* add extra parenthesis to make code more readable
* use kzalloc() for alloc+zero rather than kcalloc()
* ensure that AUTO_SEQ_* starts at 0
Signed-off-by: Harald Welte <HaraldWelte@viatech.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Don't use __init but __devinit to define probe function. A pointer to
sa11xx_uda1341_probe is passed to the core via platform_driver_register
and so the function must not disappear after the module is loaded. Using
__init and having HOTPLUG=y and SND_SA11XX_UDA1341=m the following
probably oopses:
echo -n sa11xx_uda1341.1 > /sys/bus/platform/driver/sa11xx_uda1341/unbind
echo -n sa11xx_uda1341.1 > /sys/bus/platform/driver/sa11xx_uda1341/bind
Signed-off-by: Uwe Kleine-König <ukleinek@informatik.uni-freiburg.de>
Cc: Russell King <rmk+kernel@arm.linux.org.uk>
Cc: Brian Avery <b.avery@hp.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Changed the mux naming scheme from "IEC9258 Mux" to "IEC958 Playback Source" to match
the coding style.
Signed-by-off: Matthew Ranostay <mranostay@embeddedalley.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Added slave_dig_outs entries for several IDT codecs that have multiple
SPDIF outs, and enabled these SPDIF outs in several pin configs.
Signed-off-by: Matthew Ranostay <mranostay@embeddedalley.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Muting the DAC masks artefacts introduced as the digital stream shuts
down, for example when the input stops being clocked.
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Hopefully this will make merges a little bit easier.
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
