4482 Commits

Author SHA1 Message Date
Masami Hiramatsu
cf881485eb selftests/ftrace: Add a testcase for kprobe multiprobe event
Add a testcase for kprobe event with multi-probe.

Link: http://lkml.kernel.org/r/156095692637.28024.17188971794698768977.stgit@devnote2

Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2019-08-31 12:19:39 -04:00
Masanari Iida
1c6d6e021c selftests/bpf: Fix a typo in test_offload.py
This patch fix a spelling typo in test_offload.py

Signed-off-by: Masanari Iida <standby24x7@gmail.com>
Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-08-31 01:00:28 +02:00
Quentin Monnet
45c5589d07 tools: bpftool: improve and check builds for different make invocations
There are a number of alternative "make" invocations that can be used to
compile bpftool. The following invocations are expected to work:

  - through the kbuild system, from the top of the repository
    (make tools/bpf)
  - by telling make to change to the bpftool directory
    (make -C tools/bpf/bpftool)
  - by building the BPF tools from tools/
    (cd tools && make bpf)
  - by running make from bpftool directory
    (cd tools/bpf/bpftool && make)

Additionally, setting the O or OUTPUT variables should tell the build
system to use a custom output path, for each of these alternatives.

The following patch fixes the following invocations:

  $ make tools/bpf
  $ make tools/bpf O=<dir>
  $ make -C tools/bpf/bpftool OUTPUT=<dir>
  $ make -C tools/bpf/bpftool O=<dir>
  $ cd tools/ && make bpf O=<dir>
  $ cd tools/bpf/bpftool && make OUTPUT=<dir>
  $ cd tools/bpf/bpftool && make O=<dir>

After this commit, the build still fails for two variants when passing
the OUTPUT variable:

  $ make tools/bpf OUTPUT=<dir>
  $ cd tools/ && make bpf OUTPUT=<dir>

In order to remember and check what make invocations are supposed to
work, and to document the ones which do not, a new script is added to
the BPF selftests. Note that some invocations require the kernel to be
configured, so the script skips them if no .config file is found.

v2:
- In make_and_clean(), set $ERROR to 1 when "make" returns non-zero,
  even if the binary was produced.
- Run "make clean" from the correct directory (bpf/ instead of bpftool/,
  when relevant).

Reported-by: Lorenz Bauer <lmb@cloudflare.com>
Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-08-31 00:38:16 +02:00
Dan Williams
d78c620a2e libnvdimm/security: Introduce a 'frozen' attribute
In the process of debugging a system with an NVDIMM that was failing to
unlock it was found that the kernel is reporting 'locked' while the DIMM
security interface is 'frozen'. Unfortunately the security state is
tracked internally as an enum which prevents it from communicating the
difference between 'locked' and 'locked + frozen'. It follows that the
enum also prevents the kernel from communicating 'unlocked + frozen'
which would be useful for debugging why security operations like 'change
passphrase' are disabled.

Ditch the security state enum for a set of flags and introduce a new
sysfs attribute explicitly for the 'frozen' state. The regression risk
is low because the 'frozen' state was already blocked behind the
'locked' state, but will need to revisit if there were cases where
applications need 'frozen' to show up in the primary 'security'
attribute. The expectation is that communicating 'frozen' is mostly a
helper for debug and status monitoring.

Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Reported-by: Jeff Moyer <jmoyer@redhat.com>
Reviewed-by: Jeff Moyer <jmoyer@redhat.com>
Link: https://lore.kernel.org/r/156686729474.184120.5835135644278860826.stgit@dwillia2-desk3.amr.corp.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2019-08-29 13:49:13 -07:00
Mimi Zohar
cbc0425d3d sefltest/ima: support appended signatures (modsig)
In addition to the PE/COFF and IMA xattr signatures, the kexec kernel
image can be signed with an appended signature, using the same
scripts/sign-file tool that is used to sign kernel modules.

This patch adds support for detecting a kernel image signed with an
appended signature and updates the existing test messages
appropriately.

Reviewed-by: Petr Vorel <pvorel@suse.cz>
Acked-by: Shuah Khan <skhan@linuxfoundation.org>
Reviewed-by: Thiago Jung Bauermann <bauerman@linux.ibm.com>
Reviewed-by: Jordan Hand <jorhand@linux.microsoft.com> (x86_64 QEMU)
Tested-by: Jordan Hand <jorhand@linux.microsoft.com> (x86_64 QEMU)
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
2019-08-29 12:45:30 -04:00
Thomas Huth
be6f55a60d KVM: selftests: Add a test for the KVM_S390_MEM_OP ioctl
Check that we can write and read the guest memory with this s390x
ioctl, and that some error cases are handled correctly.

Signed-off-by: Thomas Huth <thuth@redhat.com>
Link: https://lkml.kernel.org/r/20190829130732.580-1-thuth@redhat.com
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2019-08-29 16:09:11 +02:00
Stanislav Fomichev
47ee6e86e0 selftests/bpf: remove wrong nhoff in flow dissector test
.nhoff = 0 is (correctly) reset to ETH_HLEN on the next line so let's
drop it.

Signed-off-by: Stanislav Fomichev <sdf@google.com>
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-08-28 00:39:43 +02:00
Stanislav Fomichev
86ccc384cf selftests/bpf: test_progs: remove unused ret
send_signal test returns static codes from the subtests which
nobody looks at, let's rely on the CHECK macros instead.

Signed-off-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-08-28 00:35:40 +02:00
Stanislav Fomichev
62d69f24fe selftests/bpf: test_progs: remove asserts from subtests
Otherwise they can bring the whole process down.

Cc: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-08-28 00:35:40 +02:00
Stanislav Fomichev
d38835b75f selftests/bpf: test_progs: remove global fail/success counts
Now that we have a global per-test/per-environment state, there
is no longer need to have global fail/success counters (and there
is no need to save/get the diff before/after the test).

Introduce CHECK_FAIL macro (suggested by Andrii) and covert existing tests
to it. CHECK_FAIL uses new test__fail() to record the failure.

Cc: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-08-28 00:35:40 +02:00
Stanislav Fomichev
cd9c21d768 selftests/bpf: test_progs: test__skip
Export test__skip() to indicate skipped tests and use it in
test_send_signal_nmi().

Cc: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-08-28 00:35:40 +02:00
Alexei Starovoitov
411cdb4569 selftests/bpf: add precision tracking test
Copy-paste of existing test
"calls: cross frame pruning - liveness propagation"
but ran with different parentage chain heuristic
which stresses different path in precision tracking logic.

Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-08-28 00:30:12 +02:00
Alexei Starovoitov
e8c13c4d9b selftests/bpf: verifier precise tests
Use BPF_F_TEST_STATE_FREQ flag to check that precision
tracking works as expected by comparing every step it takes.

Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-08-28 00:30:11 +02:00
David S. Miller
68aaf44595 Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Minor conflict in r8169, bug fix had two versions in net
and net-next, take the net-next hunks.

Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-27 14:23:31 -07:00
Linus Torvalds
452a04441b Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from David Miller:

 1) Use 32-bit index for tails calls in s390 bpf JIT, from Ilya
    Leoshkevich.

 2) Fix missed EPOLLOUT events in TCP, from Eric Dumazet. Same fix for
    SMC from Jason Baron.

 3) ipv6_mc_may_pull() should return 0 for malformed packets, not
    -EINVAL. From Stefano Brivio.

 4) Don't forget to unpin umem xdp pages in error path of
    xdp_umem_reg(). From Ivan Khoronzhuk.

 5) Fix sta object leak in mac80211, from Johannes Berg.

 6) Fix regression by not configuring PHYLINK on CPU port of bcm_sf2
    switches. From Florian Fainelli.

 7) Revert DMA sync removal from r8169 which was causing regressions on
    some MIPS Loongson platforms. From Heiner Kallweit.

 8) Use after free in flow dissector, from Jakub Sitnicki.

 9) Fix NULL derefs of net devices during ICMP processing across
    collect_md tunnels, from Hangbin Liu.

10) proto_register() memory leaks, from Zhang Lin.

11) Set NLM_F_MULTI flag in multipart netlink messages consistently,
    from John Fastabend.

* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (66 commits)
  r8152: Set memory to all 0xFFs on failed reg reads
  openvswitch: Fix conntrack cache with timeout
  ipv4: mpls: fix mpls_xmit for iptunnel
  nexthop: Fix nexthop_num_path for blackhole nexthops
  net: rds: add service level support in rds-info
  net: route dump netlink NLM_F_MULTI flag missing
  s390/qeth: reject oversized SNMP requests
  sock: fix potential memory leak in proto_register()
  MAINTAINERS: Add phylink keyword to SFF/SFP/SFP+ MODULE SUPPORT
  xfrm/xfrm_policy: fix dst dev null pointer dereference in collect_md mode
  ipv4/icmp: fix rt dst dev null pointer dereference
  openvswitch: Fix log message in ovs conntrack
  bpf: allow narrow loads of some sk_reuseport_md fields with offset > 0
  bpf: fix use after free in prog symbol exposure
  bpf: fix precision tracking in presence of bpf2bpf calls
  flow_dissector: Fix potential use-after-free on BPF_PROG_DETACH
  Revert "r8169: remove not needed call to dma_sync_single_for_device"
  ipv6: propagate ipv6_add_dev's error returns out of ipv6_find_idev
  net/ncsi: Fix the payload copying for the request coming from Netlink
  qed: Add cleanup in qed_slowpath_start()
  ...
2019-08-27 10:12:48 -07:00
Gustavo Romero
6652bf6408 selftests/powerpc: Retry on host facility unavailable
TM test tm-unavailable must take into account aborts due to host aborting
a transactin because of a facility unavailable exception, just like it
already does for aborts on reschedules (TM_CAUSE_KVM_RESCHED).

Reported-by: Desnes A. Nunes do Rosario <desnesn@linux.ibm.com>
Tested-by: Desnes A. Nunes do Rosario <desnesn@linux.ibm.com>
Signed-off-by: Gustavo Romero <gromero@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/1566341651-19747-1-git-send-email-gromero@linux.vnet.ibm.com
2019-08-26 10:47:54 +10:00
Gustavo Romero
9d535e200f selftests/powerpc: Fix and enhance TM signal context tests
Currently TM signal context tests for GPR, FPR, VMX, and VSX registers
print wrong register numbers (wrongly starting from register 0 instead
of the first register in the non-volatile subset). Besides it the
output when a mismatch happens is poor giving not much information
about which context and which register mismatches, because it prints
both contexts at the same time and not a comparison between the value
that mismatches and the value expected and, moreover, it stops
printing on the first mismatch, but it's important to know if there
are other mismatches happening beyond the first one.

For instance, this is the current output when a mismatch happens:

  test: tm_signal_context_chk_gpr
  tags: git_version:v5.2-8249-g02e970fae465-dirty
  Failed on 0 GPR 1 or 18446744073709551615
  failure: tm_signal_context_chk_gpr

  test: tm_signal_context_chk_fpu
  tags: git_version:v5.2-8248-g09c289e3ef80
  Failed on 0 FP -1 or -1
  failure: tm_signal_context_chk_fpu

  test: tm_signal_context_chk_vmx
  tags: git_version:v5.2-8248-g09c289e3ef80
  Failed on 0 vmx 0xfffffffffffffffefffffffdfffffffc vs 0xfffffffffffffffefffffffdfffffffc
  failure: tm_signal_context_chk_vmx

  test: tm_signal_context_chk_vsx
  tags: git_version:v5.2-8248-g09c289e3ef80
  Failed on 0 vsx 0xfffffffffefffffffdfffffffcffffff vs 0xfffffffffefffffffdfffffffcffffff
  failure: tm_signal_context_chk_vsx

This commit fixes the register numbers printed and enhances the error
output by providing a full list of mismatching registers separated by
the context (non-speculative or speculative context), for example:

  test: tm_signal_context_chk_gpr
  tags: git_version:v5.2-8249-g02e970fae465-dirty
  GPR14 (1st context) == 1 instead of -1 (expected)
  GPR15 (1st context) == 2 instead of -2 (expected)
  GPR14 (2nd context) == 0 instead of 18446744073709551615 (expected)
  GPR15 (2nd context) == 0 instead of 18446744073709551614 (expected)
  failure: tm_signal_context_chk_gpr

  test: tm_signal_context_chk_fpu
  tags: git_version:v5.2-8249-g02e970fae465-dirty
  FPR14 (1st context) == -1 instead of 1 (expected)
  FPR15 (1st context) == -2 instead of 2 (expected)
  failure: tm_signal_context_chk_fpu

  test: tm_signal_context_chk_vmx
  tags: git_version:v5.2-8249-g02e970fae465-dirty
  VMX20 (1st context) == 0xfffffffffffffffefffffffdfffffffc instead of 0x00000001000000020000000300000004 (expected)
  VMX21 (1st context) == 0xfffffffbfffffffafffffff9fffffff8 instead of 0x00000005000000060000000700000008 (expected)
  failure: tm_signal_context_chk_vmx

  test: tm_signal_context_chk_vsx
  tags: git_version:v5.2-8249-g02e970fae465-dirty
  VSX20 (1st context) == 0xfffffffffefffffffdfffffffcffffff instead of 0x00000001000000020000000300000004 (expected)
  VSX21 (1st context) == 0xfbfffffffafffffff9fffffff8ffffff instead of 0x00000005000000060000000700000008 (expected)
  failure: tm_signal_context_chk_vsx

Finally, this commit adds comments to the tests in the hope that it
will help people not so familiar with TM understand the tests.

Signed-off-by: Gustavo Romero <gromero@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20190814205211.24840-1-gromero@linux.ibm.com
2019-08-26 10:47:54 +10:00
David S. Miller
211c462452 Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf
Daniel Borkmann says:

====================
pull-request: bpf 2019-08-24

The following pull-request contains BPF updates for your *net* tree.

The main changes are:

1) Fix verifier precision tracking with BPF-to-BPF calls, from Alexei.

2) Fix a use-after-free in prog symbol exposure, from Daniel.

3) Several s390x JIT fixes plus BE related fixes in BPF kselftests, from Ilya.

4) Fix memory leak by unpinning XDP umem pages in error path, from Ivan.

5) Fix a potential use-after-free on flow dissector detach, from Jakub.

6) Fix bpftool to close prog fd after showing metadata, from Quentin.

7) BPF kselftest config and TEST_PROGS_EXTENDED fixes, from Anders.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-23 17:34:11 -07:00
Ingo Molnar
6c06b66e95 Merge branch 'for-mingo' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu into core/rcu
Pull RCU and LKMM changes from Paul E. McKenney:

 - A few more RCU flavor consolidation cleanups.

 - Miscellaneous fixes.

 - Updates to RCU's list-traversal macros improving lockdep usability.

 - Torture-test updates.

 - Forward-progress improvements for no-CBs CPUs: Avoid ignoring
   incoming callbacks during grace-period waits.

 - Forward-progress improvements for no-CBs CPUs: Use ->cblist
   structure to take advantage of others' grace periods.

 - Also added a small commit that avoids needlessly inflicting
   scheduler-clock ticks on callback-offloaded CPUs.

 - Forward-progress improvements for no-CBs CPUs: Reduce contention
   on ->nocb_lock guarding ->cblist.

 - Forward-progress improvements for no-CBs CPUs: Add ->nocb_bypass
   list to further reduce contention on ->nocb_lock guarding ->cblist.

 - LKMM updates.

Signed-off-by: Ingo Molnar <mingo@kernel.org>
2019-08-22 20:52:04 +02:00
Gustavo Romero
b8baa05a0e selftests/powerpc: Ignore generated files
Currently some binary files which are generated when tests are compiled
are not ignored by git, so 'git status' catch them.

For copyloops test, fix wrong binary names already in .gitignore. For
ptrace, security, and stringloops tests add missing binary names to the
.gitignore file.

Signed-off-by: Gustavo Romero <gromero@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20190814205638.25322-2-gromero@linux.ibm.com
2019-08-22 23:12:47 +10:00
Jason Gunthorpe
daa138a58c Merge branch 'odp_fixes' into hmm.git
From rdma.git

Jason Gunthorpe says:

====================
This is a collection of general cleanups for ODP to clarify some of the
flows around umem creation and use of the interval tree.
====================

The branch is based on v5.3-rc5 due to dependencies, and is being taken
into hmm.git due to dependencies in the next patches.

* odp_fixes:
  RDMA/mlx5: Use odp instead of mr->umem in pagefault_mr
  RDMA/mlx5: Use ib_umem_start instead of umem.address
  RDMA/core: Make invalidate_range a device operation
  RDMA/odp: Use kvcalloc for the dma_list and page_list
  RDMA/odp: Check for overflow when computing the umem_odp end
  RDMA/odp: Provide ib_umem_odp_release() to undo the allocs
  RDMA/odp: Split creating a umem_odp from ib_umem_get
  RDMA/odp: Make the three ways to create a umem_odp clear
  RMDA/odp: Consolidate umem_odp initialization
  RDMA/odp: Make it clearer when a umem is an implicit ODP umem
  RDMA/odp: Iterate over the whole rbtree directly
  RDMA/odp: Use the common interval tree library instead of generic
  RDMA/mlx5: Fix MR npages calculation for IB_ACCESS_HUGETLB

Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-08-21 20:58:18 -03:00
Ido Schimmel
1455865a04 selftests: mlxsw: Add a test case for devlink-trap
Test generic devlink-trap functionality over mlxsw. These tests are not
specific to a single trap, but do not check the devlink-trap common
infrastructure either.

Currently, the only test case is device deletion (by reloading the
driver) while packets are being trapped.

Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-21 12:58:39 -07:00
Ido Schimmel
170270329b selftests: mlxsw: Add test cases for devlink-trap L2 drops
Test that each supported packet trap is triggered under the right
conditions and that packets are indeed dropped and not forwarded.

Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-21 12:58:39 -07:00
Linus Torvalds
bb7ba8069d * A couple bugfixes, and mostly selftests changes.
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.22 (GNU/Linux)
 
 iQEcBAABAgAGBQJdXX+WAAoJEL/70l94x66DmBoH/RT2qD8Z16Nwlz/8XbFmUCtb
 4B0eCaiTpnmDuF2T9nghMitg/CHjFHJJK7bLSkq9C4Fb9HTEfDabb4TRMENOVTB3
 u9bK2s+/WG2uWKt1rP6uhSgVumwPQ/5JY30N59nEZ+ZgY6bJ+U3pUfZnPb4FeaVi
 EKYXDeToEXWVHJyv+HpkJ+2YV7gQ43qZO3x6papzPAbJp5yN7YDETDylPLF7y7CL
 njZ+8z4HaVoJH/T3E2wySEcFO2W9Pc7YH8fIFbvGmPMuOMB5AabBj3mnq/38qsVn
 n/SPMrq81DqNH9xeCQXR/7NdPr0ifx830K74pHJ/uCcwHjzB9KWSkv8lbyBPuEU=
 =zArX
 -----END PGP SIGNATURE-----

Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm

Pull KVM fixes from Paolo Bonzini:
 "A couple bugfixes, and mostly selftests changes"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
  selftests/kvm: make platform_info_test pass on AMD
  Revert "KVM: x86/mmu: Zap only the relevant pages when removing a memslot"
  selftests: kvm: fix state save/load on processors without XSAVE
  selftests: kvm: fix vmx_set_nested_state_test
  selftests: kvm: provide common function to enable eVMCS
  selftests: kvm: do not try running the VM in vmx_set_nested_state_test
  KVM: x86: svm: remove redundant assignment of var new_entry
  MAINTAINERS: add KVM x86 reviewers
  MAINTAINERS: change list for KVM/s390
  kvm: x86: skip populating logical dest map if apic is not sw enabled
2019-08-21 11:48:38 -07:00
Vitaly Kuznetsov
e442737239 selftests/kvm: make platform_info_test pass on AMD
test_msr_platform_info_disabled() generates EXIT_SHUTDOWN but VMCB state
is undefined after that so an attempt to launch this guest again from
test_msr_platform_info_enabled() fails. Reorder the tests to make test
pass.

Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-08-21 19:08:18 +02:00
Anders Roxell
3035bb72ee selftests/bpf: install files test_xdp_vlan.sh
When ./test_xdp_vlan_mode_generic.sh runs it complains that it can't
find file test_xdp_vlan.sh.

 # selftests: bpf: test_xdp_vlan_mode_generic.sh
 # ./test_xdp_vlan_mode_generic.sh: line 9: ./test_xdp_vlan.sh: No such
 file or directory

Rework so that test_xdp_vlan.sh gets installed, added to the variable
TEST_PROGS_EXTENDED.

Fixes: d35661fcf95d ("selftests/bpf: add wrapper scripts for test_xdp_vlan.sh")
Signed-off-by: Anders Roxell <anders.roxell@linaro.org>
Acked-by: Jesper Dangaard Brouer <jbrouer@redhat.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-08-21 17:06:04 +02:00
Anders Roxell
0604409df9 selftests/bpf: add config fragment BPF_JIT
When running test_kmod.sh the following shows up

 # sysctl cannot stat /proc/sys/net/core/bpf_jit_enable No such file or directory
 cannot: stat_/proc/sys/net/core/bpf_jit_enable #
 # sysctl cannot stat /proc/sys/net/core/bpf_jit_harden No such file or directory
 cannot: stat_/proc/sys/net/core/bpf_jit_harden #

Rework to enable CONFIG_BPF_JIT to solve "No such file or directory"

Signed-off-by: Anders Roxell <anders.roxell@linaro.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-08-21 17:05:06 +02:00
Ilya Leoshkevich
e91dcb536a selftests/bpf: fix test_btf_dump with O=
test_btf_dump fails when run with O=, because it needs to access source
files and assumes they live in ./progs/, which is not the case in this
scenario.

Fix by instructing kselftest to copy btf_dump_test_case_*.c files to the
test directory. Since kselftest does not preserve directory structure,
adjust the test to look in ./progs/ and then in ./.

Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-08-21 17:00:59 +02:00
Ilya Leoshkevich
806ce6e211 selftests/bpf: fix test_cgroup_storage on s390
test_cgroup_storage fails on s390 with an assertion failure: packets are
dropped when they shouldn't. The problem is that BPF_DW packet count is
accessed as BPF_W with an offset of 0, which is not correct on
big-endian machines.

Since the point of this test is not to verify narrow loads/stores,
simply use BPF_DW when working with packet counts.

Fixes: 68cfa3ac6b8d ("selftests/bpf: add a cgroup storage test")
Fixes: 919646d2a3a9 ("selftests/bpf: extend the storage test to test per-cpu cgroup storage")
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-08-21 16:55:01 +02:00
Paolo Bonzini
54577e5018 selftests: kvm: fix state save/load on processors without XSAVE
state_test and smm_test are failing on older processors that do not
have xcr0.  This is because on those processor KVM does provide
support for KVM_GET/SET_XSAVE (to avoid having to rely on the older
KVM_GET/SET_FPU) but not for KVM_GET/SET_XCRS.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-08-21 10:27:35 +02:00
Christoph Hellwig
fdc029b19d memremap: remove the dev field in struct dev_pagemap
The dev field in struct dev_pagemap is only used to print dev_name in two
places, which are at best nice to have.  Just remove the field and thus
the name in those two messages.

Link: https://lore.kernel.org/r/20190818090557.17853-3-hch@lst.de
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Tested-by: Bharata B Rao <bharata@linux.ibm.com>
Reviewed-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-08-20 09:41:35 -03:00
Florian Westphal
769a807d0b xfrm: policy: avoid warning splat when merging nodes
syzbot reported a splat:
 xfrm_policy_inexact_list_reinsert+0x625/0x6e0 net/xfrm/xfrm_policy.c:877
 CPU: 1 PID: 6756 Comm: syz-executor.1 Not tainted 5.3.0-rc2+ #57
 Call Trace:
  xfrm_policy_inexact_node_reinsert net/xfrm/xfrm_policy.c:922 [inline]
  xfrm_policy_inexact_node_merge net/xfrm/xfrm_policy.c:958 [inline]
  xfrm_policy_inexact_insert_node+0x537/0xb50 net/xfrm/xfrm_policy.c:1023
  xfrm_policy_inexact_alloc_chain+0x62b/0xbd0 net/xfrm/xfrm_policy.c:1139
  xfrm_policy_inexact_insert+0xe8/0x1540 net/xfrm/xfrm_policy.c:1182
  xfrm_policy_insert+0xdf/0xce0 net/xfrm/xfrm_policy.c:1574
  xfrm_add_policy+0x4cf/0x9b0 net/xfrm/xfrm_user.c:1670
  xfrm_user_rcv_msg+0x46b/0x720 net/xfrm/xfrm_user.c:2676
  netlink_rcv_skb+0x1f0/0x460 net/netlink/af_netlink.c:2477
  xfrm_netlink_rcv+0x74/0x90 net/xfrm/xfrm_user.c:2684
  netlink_unicast_kernel net/netlink/af_netlink.c:1302 [inline]
  netlink_unicast+0x809/0x9a0 net/netlink/af_netlink.c:1328
  netlink_sendmsg+0xa70/0xd30 net/netlink/af_netlink.c:1917
  sock_sendmsg_nosec net/socket.c:637 [inline]
  sock_sendmsg net/socket.c:657 [inline]

There is no reproducer, however, the warning can be reproduced
by adding rules with ever smaller prefixes.

The sanity check ("does the policy match the node") uses the prefix value
of the node before its updated to the smaller value.

To fix this, update the prefix earlier.  The bug has no impact on tree
correctness, this is only to prevent a false warning.

Reported-by: syzbot+8cc27ace5f6972910b31@syzkaller.appspotmail.com
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2019-08-20 08:09:42 +02:00
Vlad Buslov
14b54ac4fb tc-testing: concurrency: wrap piped rule update commands
Concurrent tests use several commands to update rules in parallel: 'find'
prints names of batch files in tmp directory and pipes result to 'xargs'
which runs instance of tc per batch file in parallel. This breaks when used
with ns plugin that adds 'ip netns exec $NS' prefix to the command, which
causes only first command in pipe to be executed in namespace:

=====> Test e41d: Add 1M flower filters with 10 parallel tc instances
-----> prepare stage
ns/SubPlugin.adjust_command
adjust_command:  stage is setup; inserting netns stuff in command [/bin/mkdir tmp] list [['/bin/mkdir', 'tmp']]
adjust_command:  return command [ip netns exec tcut /bin/mkdir tmp]
command "ip netns exec tcut /bin/mkdir tmp"
ns/SubPlugin.adjust_command
adjust_command:  stage is setup; inserting netns stuff in command [/sbin/tc qdisc add dev ens1f0 ingress] list [['/sbin/tc', 'qdisc', 'add', 'dev', 'ens1f0', 'ingress']]
adjust_command:  return command [ip netns exec tcut /sbin/tc qdisc add dev ens1f0 ingress]
command "ip netns exec tcut /sbin/tc qdisc add dev ens1f0 ingress"
ns/SubPlugin.adjust_command
adjust_command:  stage is setup; inserting netns stuff in command [./tdc_multibatch.py ens1f0 tmp 100000 10 add] list [['./tdc_multibatch.py', 'ens1f0', 'tmp', '100000', '10', 'add']]
adjust_command:  return command [ip netns exec tcut ./tdc_multibatch.py ens1f0 tmp 100000 10 add]
command "ip netns exec tcut ./tdc_multibatch.py ens1f0 tmp 100000 10 add"
-----> execute stage
ns/SubPlugin.adjust_command
adjust_command:  stage is execute; inserting netns stuff in command [find tmp/add* -print | xargs -n 1 -P 10 /sbin/tc -b] list [['find', 'tmp/add*', '-print', '|', 'xargs', '-n', '1', '-P', '10', '/sbin/tc', '-b']
]
adjust_command:  return command [ip netns exec tcut find tmp/add* -print | xargs -n 1 -P 10 /sbin/tc -b]
command "ip netns exec tcut find tmp/add* -print | xargs -n 1 -P 10 /sbin/tc -b"
exit: 123
exit: 0
Cannot find device "ens1f0"
Cannot find device "ens1f0"
Command failed tmp/add_0:1
Command failed tmp/add_1:1
Cannot find device "ens1f0"
Command failed tmp/add_2:1
Cannot find device "ens1f0"
Command failed tmp/add_4:1
Cannot find device "ens1f0"
Command failed tmp/add_3:1
Cannot find device "ens1f0"
Command failed tmp/add_5:1
Cannot find device "ens1f0"
Command failed tmp/add_6:1
Cannot find device "ens1f0"
Command failed tmp/add_8:1
Cannot find device "ens1f0"
Command failed tmp/add_7:1
Cannot find device "ens1f0"
Command failed tmp/add_9:1

Fix the issue by executing whole compound command in namespace by wrapping
it in 'bash -c' invocation.

Fixes: 489ce2f42514 ("tc-testing: Restore original behaviour for namespaces in tdc")
Signed-off-by: Vlad Buslov <vladbu@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-19 18:19:48 -07:00
Vlad Buslov
c11a99e794 tc-testing: use dedicated DUMMY interface name for dummy dev
A lot of tests reuse $DEV1 veth name for naming dummy device. This causes
problem when tdc is invoked without specifying a test group and tries to
execute all tests. In this case tdc instantiates ns plugin, which creates
veth pair once before running tests. However, if any of the tests that
reuse $DEV1 run before test that depend on ns plugin, it will delete $DEV1
as a part of teardown section:

=====> Test 3b88: Delete ingress qdisc twice                                                                                                                                                             [3770/41080]
-----> prepare stage
ns/SubPlugin.adjust_command
adjust_command:  stage is setup; inserting netns stuff in command [/sbin/ip link add dev v0p1 type dummy || /bin/true] list [['/sbin/ip', 'link', 'add', 'dev', 'v0p1', 'type', 'dummy', '||', '/bin/true']]
adjust_command:  return command [ip netns exec tcut /sbin/ip link add dev v0p1 type dummy || /bin/true]
command "ip netns exec tcut /sbin/ip link add dev v0p1 type dummy || /bin/true"
ns/SubPlugin.adjust_command
adjust_command:  stage is setup; inserting netns stuff in command [/sbin/tc qdisc add dev v0p1 ingress] list [['/sbin/tc', 'qdisc', 'add', 'dev', 'v0p1', 'ingress']]
adjust_command:  return command [ip netns exec tcut /sbin/tc qdisc add dev v0p1 ingress]
command "ip netns exec tcut /sbin/tc qdisc add dev v0p1 ingress"
ns/SubPlugin.adjust_command
adjust_command:  stage is setup; inserting netns stuff in command [/sbin/tc qdisc del dev v0p1 ingress] list [['/sbin/tc', 'qdisc', 'del', 'dev', 'v0p1', 'ingress']]
adjust_command:  return command [ip netns exec tcut /sbin/tc qdisc del dev v0p1 ingress]
command "ip netns exec tcut /sbin/tc qdisc del dev v0p1 ingress"
-----> execute stage
ns/SubPlugin.adjust_command
adjust_command:  stage is execute; inserting netns stuff in command [/sbin/tc qdisc del dev v0p1 ingress] list [['/sbin/tc', 'qdisc', 'del', 'dev', 'v0p1', 'ingress']]
adjust_command:  return command [ip netns exec tcut /sbin/tc qdisc del dev v0p1 ingress]
command "ip netns exec tcut /sbin/tc qdisc del dev v0p1 ingress"
-----> verify stage
ns/SubPlugin.adjust_command
adjust_command:  stage is verify; inserting netns stuff in command [/sbin/tc qdisc show dev v0p1] list [['/sbin/tc', 'qdisc', 'show', 'dev', 'v0p1']]
adjust_command:  return command [ip netns exec tcut /sbin/tc qdisc show dev v0p1]
command "ip netns exec tcut /sbin/tc qdisc show dev v0p1"
-----> teardown stage
ns/SubPlugin.adjust_command
adjust_command:  stage is teardown; inserting netns stuff in command [/sbin/ip link del dev v0p1 type dummy] list [['/sbin/ip', 'link', 'del', 'dev', 'v0p1', 'type', 'dummy']]
adjust_command:  return command [ip netns exec tcut /sbin/ip link del dev v0p1 type dummy]
command "ip netns exec tcut /sbin/ip link del dev v0p1 type dummy"

After this ns-dependent tests will fail because dev doesn't exist:

=====> Test 901f: Add fw filter with prio at 32-bit maxixum
-----> prepare stage
ns/SubPlugin.adjust_command
adjust_command:  stage is setup; inserting netns stuff in command [/sbin/tc qdisc add dev v0p1 ingress] list [['/sbin/tc', 'qdisc', 'add', 'dev', 'v0p1', 'ingress']]
adjust_command:  return command [ip netns exec tcut /sbin/tc qdisc add dev v0p1 ingress]
command "ip netns exec tcut /sbin/tc qdisc add dev v0p1 ingress"

-----> prepare stage *** Could not execute: "$TC qdisc add dev $DEV1 ingress"

-----> prepare stage *** Error message: "Cannot find device "v0p1"
"
returncode 1; expected [0]

-----> prepare stage *** Aborting test run.

<_io.BufferedReader name=3> *** stdout ***

<_io.BufferedReader name=5> *** stderr ***
"-----> prepare stage" did not complete successfully
Exception <class '__main__.PluginMgrTestFail'> ('setup', None, '"-----> prepare stage" did not complete successfully') (caught in test_runner, running test 477 901f Add fw filter with prio at 32-bit maxixum stage
setup)
---------------
traceback
  File "./tdc.py", line 371, in test_runner
    res = run_one_test(pm, args, index, tidx)
  File "./tdc.py", line 272, in run_one_test
    prepare_env(args, pm, 'setup', "-----> prepare stage", tidx["setup"])
  File "./tdc.py", line 247, in prepare_env
    '"{}" did not complete successfully'.format(prefix))
---------------

Fix the issue by introducing standalone $DUMMY config variable and
substitute all usage of $DEV1 in tests that don't depend on ns plugin.

Fixes: 489ce2f42514 ("tc-testing: Restore original behaviour for namespaces in tdc")
Signed-off-by: Vlad Buslov <vladbu@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-19 18:19:47 -07:00
Ilya Leoshkevich
0ac33e4e9b selftests: use "$(MAKE)" instead of "make"
When doing "make kselftest TARGETS=bpf -j12", bpf progs end up being
compiled sequentially and thus slowly.

The reason is that parent make (tools/testing/selftests/Makefile) does
not share its jobserver with child make
(tools/testing/selftests/bpf/Makefile), therefore the latter runs with
-j1.

Change all instances of "make" to "$(MAKE)", so that the whole make
hierarchy runs using a single jobserver.

Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2019-08-19 14:21:36 -06:00
David S. Miller
446bf64b61 Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Merge conflict of mlx5 resolved using instructions in merge
commit 9566e650bf7fdf58384bb06df634f7531ca3a97e.

Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-19 11:54:03 -07:00
Linus Torvalds
06821504fd Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from David Miller:

  1) Fix jmp to 1st instruction in x64 JIT, from Alexei Starovoitov.

  2) Severl kTLS fixes in mlx5 driver, from Tariq Toukan.

  3) Fix severe performance regression due to lack of SKB coalescing of
     fragments during local delivery, from Guillaume Nault.

  4) Error path memory leak in sch_taprio, from Ivan Khoronzhuk.

  5) Fix batched events in skbedit packet action, from Roman Mashak.

  6) Propagate VLAN TX offload to hw_enc_features in bond and team
     drivers, from Yue Haibing.

  7) RXRPC local endpoint refcounting fix and read after free in
     rxrpc_queue_local(), from David Howells.

  8) Fix endian bug in ibmveth multicast list handling, from Thomas
     Falcon.

  9) Oops, make nlmsg_parse() wrap around the correct function,
     __nlmsg_parse not __nla_parse(). Fix from David Ahern.

 10) Memleak in sctp_scend_reset_streams(), fro Zheng Bin.

 11) Fix memory leak in cxgb4, from Wenwen Wang.

 12) Yet another race in AF_PACKET, from Eric Dumazet.

 13) Fix false detection of retransmit failures in tipc, from Tuong
     Lien.

 14) Use after free in ravb_tstamp_skb, from Tho Vu.

* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (101 commits)
  ravb: Fix use-after-free ravb_tstamp_skb
  netfilter: nf_tables: map basechain priority to hardware priority
  net: sched: use major priority number as hardware priority
  wimax/i2400m: fix a memory leak bug
  net: cavium: fix driver name
  ibmvnic: Unmap DMA address of TX descriptor buffers after use
  bnxt_en: Fix to include flow direction in L2 key
  bnxt_en: Use correct src_fid to determine direction of the flow
  bnxt_en: Suppress HWRM errors for HWRM_NVM_GET_VARIABLE command
  bnxt_en: Fix handling FRAG_ERR when NVM_INSTALL_UPDATE cmd fails
  bnxt_en: Improve RX doorbell sequence.
  bnxt_en: Fix VNIC clearing logic for 57500 chips.
  net: kalmia: fix memory leaks
  cx82310_eth: fix a memory leak bug
  bnx2x: Fix VF's VLAN reconfiguration in reload.
  Bluetooth: Add debug setting for changing minimum encryption key size
  tipc: fix false detection of retransmit failures
  lan78xx: Fix memory leaks
  MAINTAINERS: r8169: Update path to the driver
  MAINTAINERS: PHY LIBRARY: Update files in the record
  ...
2019-08-19 10:00:01 -07:00
Andrey Konovalov
74585fcb7b selftests, arm64: fix uninitialized symbol in tags_test.c
Fix tagged_ptr not being initialized when TBI is not enabled.

Link: https://www.spinics.net/lists/linux-kselftest/msg09446.html
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Signed-off-by: Will Deacon <will@kernel.org>
2019-08-19 16:25:32 +01:00
Stanislav Fomichev
c3bbf176fb selftests/bpf: add sockopt clone/inheritance test
Add a test that calls setsockopt on the listener socket which triggers
BPF program. This BPF program writes to the sk storage and sets
clone flag. Make sure that sk storage is cloned for a newly
accepted connection.

We have two cloned maps in the tests to make sure we hit both cases
in bpf_sk_storage_clone: first element (sk_storage_alloc) and
non-first element(s) (selem_link_map).

Cc: Martin KaFai Lau <kafai@fb.com>
Cc: Yonghong Song <yhs@fb.com>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Acked-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-08-17 23:18:54 +02:00
Petar Penkov
fae55527ac selftests/bpf: fix race in test_tcp_rtt test
There is a race in this test between receiving the ACK for the
single-byte packet sent in the test, and reading the values from the
map.

This patch fixes this by having the client wait until there are no more
unacknowledged packets.

Before:
for i in {1..1000}; do ../net/in_netns.sh ./test_tcp_rtt; \
done | grep -c PASSED
< trimmed error messages >
993

After:
for i in {1..10000}; do ../net/in_netns.sh ./test_tcp_rtt; \
done | grep -c PASSED
10000

Fixes: b55873984dab ("selftests/bpf: test BPF_SOCK_OPS_RTT_CB")
Signed-off-by: Petar Penkov <ppenkov@google.com>
Reviewed-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-08-17 23:16:25 +02:00
Andrii Nakryiko
929ffa6e9d libbpf: relicense bpf_helpers.h and bpf_endian.h
bpf_helpers.h and bpf_endian.h contain useful macros and BPF helper
definitions essential to almost every BPF program. Which makes them
useful not just for selftests. To be able to expose them as part of
libbpf, though, we need them to be dual-licensed as LGPL-2.1 OR
BSD-2-Clause. This patch updates licensing of those two files.

Acked-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Hechao Li <hechaol@fb.com>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Acked-by: Andrey Ignatov <rdna@fb.com>
Acked-by: Yonghong Song <yhs@fb.com>
Acked-by: Lawrence Brakmo <brakmo@fb.com>
Acked-by: Adam Barth <arb@fb.com>
Acked-by: Roman Gushchin <guro@fb.com>
Acked-by: Josef Bacik <jbacik@fb.com>
Acked-by: Joe Stringer <joe@wand.net.nz>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Acked-by: David Ahern <dsahern@gmail.com>
Acked-by: Jesper Dangaard Brouer <brouer@redhat.com>
Acked-by: Ilya Leoshkevich <iii@linux.ibm.com>
Acked-by: Lorenz Bauer <lmb@cloudflare.com>
Acked-by: Adrian Ratiu <adrian.ratiu@collabora.com>
Acked-by: Nikita V. Shirokov <tehnerd@tehnerd.com>
Acked-by: Willem de Bruijn <willemb@google.com>
Acked-by: Petar Penkov <ppenkov@google.com>
Acked-by: Teng Qin <palmtenor@gmail.com>
Cc: Michael Holzheu <holzheu@linux.vnet.ibm.com>
Cc: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Michal Rostecki <mrostecki@opensuse.org>
Cc: John Fastabend <john.fastabend@gmail.com>
Cc: Sargun Dhillon <sargun@sargun.me>
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-08-17 23:14:21 +02:00
Ido Schimmel
b3cb7df9ec selftests: devlink_trap: Add test cases for devlink-trap
Add test cases for devlink-trap on top of the netdevsim implementation.

The tests focus on the devlink-trap core infrastructure and user space
API. They test both good and bad flows and also dismantle of the netdev
and devlink device used to report trapped packets.

This allows device drivers to focus their tests on device-specific
functionality.

Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-17 12:40:09 -07:00
Ido Schimmel
a054c8d90b selftests: forwarding: devlink_lib: Add devlink-trap helpers
Add helpers to interact with devlink-trap, such as setting the action of
a trap and retrieving statistics.

Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-17 12:40:09 -07:00
Ido Schimmel
bc030d9c91 selftests: forwarding: devlink_lib: Allow tests to define devlink device
For tests that create their network interfaces dynamically or do not use
interfaces at all (as with netdevsim) it is useful to define their own
devlink device instead of deriving it from the first network interface.

Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-17 12:40:09 -07:00
David Ahern
87caaaf2d1 selftests: Fix get_ifidx and callers in nettest.c
Dan reported:

    The patch acda655fefae: "selftests: Add nettest" from Aug 1, 2019,
    leads to the following static checker warning:

            ./tools/testing/selftests/net/nettest.c:1690 main()
            warn: unsigned 'tmp' is never less than zero.

    ./tools/testing/selftests/net/nettest.c
      1680                  case '1':
      1681                          args.has_expected_raddr = 1;
      1682                          if (convert_addr(&args, optarg,
      1683                                           ADDR_TYPE_EXPECTED_REMOTE))
      1684                                  return 1;
      1685
      1686                          break;
      1687                  case '2':
      1688                          if (str_to_uint(optarg, 0, 0x7ffffff, &tmp) != 0) {
      1689                                  tmp = get_ifidx(optarg);
      1690                                  if (tmp < 0) {

    "tmp" is unsigned so it can't be negative.  Also all the callers assume
    that get_ifidx() returns negatives on error but it looks like it really
    returns zero on error so it's a bit unclear to me.

Update get_ifidx to return -1 on errors and cleanup callers of it.

Fixes: acda655fefae ("selftests: Add nettest")
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-16 15:25:34 -07:00
David S. Miller
12ed601513 Merge git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nf
Pablo Neira Ayuso says:

====================
Netfilter fixes for net

This patchset contains Netfilter fixes for net:

1) Extend selftest to cover flowtable with ipsec, from Florian Westphal.

2) Fix interaction of ipsec with flowtable, also from Florian.

3) User-after-free with bound set to rule that fails to load.

4) Adjust state and timeout for flows that expire.

5) Timeout update race with flows in teardown state.

6) Ensure conntrack id hash calculation use invariants as input,
   from Dirk Morris.

7) Do not push flows into flowtable for TCP fin/rst packets.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-15 14:01:14 -07:00
Jiri Pirko
5156d7ef6d selftests: netdevsim: add devlink regions tests
Test netdevsim devlink region implementation.

Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Tested-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-15 12:02:44 -07:00
Jiri Pirko
dc8a670a87 selftests: netdevsim: add devlink params tests
Test recently added netdevsim devlink param implementation.

Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Tested-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-15 12:01:22 -07:00
Jiri Pirko
d87e5edb4c selftests: net: push jq workaround into separate helper
Push the jq return value workaround code into a separate helper so it
could be used by the rest of the code.

Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-15 12:01:21 -07:00
Anders Roxell
2aafdf5a57 selftests: net: tcp_fastopen_backup_key.sh: fix shellcheck issue
When running tcp_fastopen_backup_key.sh the following issue was seen in
a busybox environment.
./tcp_fastopen_backup_key.sh: line 33: [: -ne: unary operator expected

Shellcheck showed the following issue.
$ shellcheck tools/testing/selftests/net/tcp_fastopen_backup_key.sh

In tools/testing/selftests/net/tcp_fastopen_backup_key.sh line 33:
        if [ $val -ne 0 ]; then
             ^-- SC2086: Double quote to prevent globbing and word splitting.

Rework to do a string comparison instead.

Signed-off-by: Anders Roxell <anders.roxell@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-15 11:34:32 -07:00