IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
Simplify the driver's probe() function by using the devres
variant of stmmac_probe_config_dt().
The remove_new() callback now needs to be switched to
stmmac_pltfr_remove_no_dt().
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Use the devres variant of stmmac_pltfr_probe() and finally drop the
remove() hook.
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Simplify the driver's probe() function by using the devres
variant of stmmac_probe_config_dt().
The remove_new() callback now needs to be switched to
stmmac_pltfr_remove_no_dt().
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Simplify the driver's probe() function by using the devres
variant of stmmac_probe_config_dt().
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Simplify the driver's probe() function by using the devres
variant of stmmac_probe_config_dt().
The remove_new() callback now needs to be switched to
stmmac_pltfr_remove_no_dt().
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Rohan G Thomas says:
====================
net: stmmac: Tx coe sw fallback
DW xGMAC IP can be synthesized such that it can support tx checksum
offloading only for a few initial tx queues. Also as Serge pointed
out, for the DW QoS IP, tx coe can be individually configured for
each tx queue. This patchset adds support for tx coe sw fallback for
those queues that don't support tx coe. Also, add binding for
snps,coe-unsupported property.
changelog v7:
* Updated commit message.
* Add blank lines around newly added dt binding.
changelog v6:
* Reworked patchset to cover DW QoS Ethernet IP also.
changelog v5:
* As rightly suggested by Serge, reworked redundant code.
changelog v4:
* Replaced tx_q_coe_lmt with bit flag.
changelog v3:
* Resend with complete email list.
changelog v2:
* Reformed binding description.
* Minor grammatical corrections in comments and commit messages.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Add sw fallback of tx checksum calculation for those tx queues that
don't support tx checksum offloading. DW xGMAC IP can be synthesized
such that it can support tx checksum offloading only for a few
initial tx queues. Also as Serge pointed out, for the DW QoS IP, tx
coe can be individually configured for each tx queue.
So when tx coe is enabled, for any tx queue that doesn't support
tx coe with 'coe-unsupported' flag set will have a sw fallback
happen in the driver for tx checksum calculation when any packets to
be transmitted on these tx queues.
Signed-off-by: Rohan G Thomas <rohan.g.thomas@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add dt-bindings for coe-unsupported property per tx queue. Some DWMAC
IPs support tx checksum offloading(coe) only for a few tx queues.
DW xGMAC IP can be synthesized such that it can support tx coe only
for a few initial tx queues. Also as Serge pointed out, for the DW
QoS IP tx coe can be individually configured for each tx queue. This
property is added to have sw fallback for checksum calculation if a
tx queue doesn't support tx coe.
Signed-off-by: Rohan G Thomas <rohan.g.thomas@intel.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Prepare for the coming implementation by GCC and Clang of the __counted_by
attribute. Flexible array members annotated with __counted_by can have
their accesses bounds-checked at run-time checking via CONFIG_UBSAN_BOUNDS
(for array indexing) and CONFIG_FORTIFY_SOURCE (for strcpy/memcpy-family
functions).
As found with Coccinelle[1], add __counted_by for struct ceph_monmap.
Additionally, since the element count member must be set before accessing
the annotated flexible array member, move its initialization earlier.
[1] https://github.com/kees/kernel-tools/blob/trunk/coccinelle/examples/counted_by.cocci
Cc: Ilya Dryomov <idryomov@gmail.com>
Cc: Xiubo Li <xiubli@redhat.com>
Cc: Jeff Layton <jlayton@kernel.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: ceph-devel@vger.kernel.org
Cc: netdev@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Reviewed-by: Xiubo Li <xiubli@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
If, for any reason, the open-coded arithmetic causes a wraparound,
the protection that `struct_size()` adds against potential integer
overflows is defeated. Fix this by hardening call to `struct_size()`
with `size_add()`.
Fixes: 3f1071ec39f7 ("net: spider_net: Use struct_size() helper")
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Geoff Levand <geoff@infradead.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
If, for any reason, the open-coded arithmetic causes a wraparound,
the protection that `struct_size()` adds against potential integer
overflows is defeated. Fix this by hardening call to `struct_size()`
with `size_add()`.
Fixes: e034c6d23bc4 ("tipc: Use struct_size() helper")
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
If, for any reason, the open-coded arithmetic causes a wraparound,
the protection that `struct_size()` adds against potential integer
overflows is defeated. Fix this by hardening call to `struct_size()`
with `size_add()`.
Fixes: b89fec54fd61 ("tls: rx: wrap decrypt params in a struct")
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
If, for any reason, the open-coded arithmetic causes a wraparound, the
protection that `struct_size()` adds against potential integer overflows
is defeated. Fix this by hardening call to `struct_size()` with `size_mul()`.
Fixes: 2285ec872d9d ("mlxsw: spectrum_acl_bloom_filter: use struct_size() in kzalloc()")
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Daniel Mendes says:
====================
kselftest: rtnetlink: add additional command line options
Many other tests implement options like verbose, pause, and pause
on failure. These patches just add these options to rtnetlink.sh.
The same conventions are used as the tests that already have this
functionality: eg verbose is 0 or 1 but PAUSE is "yes" or "no".
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
'Pause' prompts the user to press Enter to continue running tests
once one test has finished. Pause on fail on prompts the user to press
enter only when a test fails.
Modifications to kci_test_addrlft() and kci_test_ipsec_offload()
ensure that whenever end_test is called, [$ret -ne 0] indicates
failure. This allows end_test to really easily implement pause on fail
functionality.
Signed-off-by: Daniel Mendes <dmendes@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Uses a run_cmd helper function similar to other selftests to add
verbose functionality i.e. print executed commands and their outputs
Many commands silence or redirect output. This can be removed since
the verbose helper function captures output anyway and only outputs it
if VERBOSE is true. Similarly, the helper command for pipes to grep
searches stderr and stdout. This makes output redirection unnecessary
in those cases.
Signed-off-by: Daniel Mendes <dmendes@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Shannon Nelson says:
====================
pds_core: add PCI reset handling
Make sure pds_core can handle and recover from PCI function resets and
similar PCI bus issues: add detection and handlers for PCI problems.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
If we see a 0xff value from a PCI register read, we know that
the PCI connection is broken, possibly by a low level reset that
didn't go through the nice pci_error_handlers path.
Make use of the PCI cleanup code that we already have from the
reset handlers and add some detection and attempted recovery
from a broken PCI connection.
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Reviewed-by: Brett Creeley <brett.creeley@amd.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Implement the callbacks for a nice PCI reset. These get called
when a user is nice enough to use the sysfs PCI reset entry, e.g.
echo 1 > /sys/bus/pci/devices/0000:2b:00.0/reset
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Reviewed-by: Brett Creeley <brett.creeley@amd.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Keep the viftypes and the current enable/disable states
across a recovery action.
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Reviewed-by: Brett Creeley <brett.creeley@amd.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Similar to what we do in the AdminQ, check for devcmd health
while waiting for an answer.
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Reviewed-by: Brett Creeley <brett.creeley@amd.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add support to fetch firmware info such as heartbeat miss count,
heartbeat interval. This shall be used for heartbeat monitor.
Signed-off-by: Shinas Rasheed <srasheed@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
If, for any reason, `tx_stats_num + rx_stats_num` wraps around, the
protection that struct_size() adds against potential integer overflows
is defeated. Fix this by hardening call to struct_size() with size_add().
Fixes: 691f4077d560 ("gve: Replace zero-length array with flexible-array member")
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Stefano Garzarella says:
====================
vsock/test: add recv_buf()/send_buf() utility functions and some improvements
We recently found that some tests were failing [1].
The problem was that we were not waiting for all the bytes correctly,
so we had a partial read. I had initially suggested using MSG_WAITALL,
but this could have timeout problems.
Since we already had send_byte() and recv_byte() that handled the timeout,
but also the expected return value, I moved that code to two new functions
that we can now use to send/receive generic buffers.
The last commit is just an improvement to a test I found difficult to
understand while using the new functions.
@Arseniy a review and some testing are really appreciated :-)
[1] https://lore.kernel.org/netdev/63xflnwiohdfo6m3vnrrxgv2ulplencpwug5qqacugqh7xxpu3@tsczkuqgwurb/
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
The test was a bit complicated to read.
Added variables to keep track of the bytes read and to be read
in each step. Also some comments.
The test is unchanged.
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Arseniy Krasnov <avkrasnov@salutedevices.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
We have a very common pattern used in vsock_test that we can
now replace with the new send_buf().
This allows us to reuse the code we already had to check the
actual return value and wait for all the bytes to be sent with
an appropriate timeout.
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Arseniy Krasnov <avkrasnov@salutedevices.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Move the code of send_byte() out in a new utility function that
can be used to send a generic buffer.
This new function can be used when we need to send a custom
buffer and not just a single 'A' byte.
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Arseniy Krasnov <avkrasnov@salutedevices.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
We have a very common pattern used in vsock_test that we can
now replace with the new recv_buf().
This allows us to reuse the code we already had to check the
actual return value and wait for all bytes to be received with
an appropriate timeout.
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Arseniy Krasnov <avkrasnov@salutedevices.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Move the code of recv_byte() out in a new utility function that
can be used to receive a generic buffer.
This new function can be used when we need to receive a custom
buffer and not just a single 'A' byte.
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Arseniy Krasnov <avkrasnov@salutedevices.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Alexei Starovoitov says:
====================
The following pull-request contains BPF updates for your *net-next* tree.
We've added 73 non-merge commits during the last 9 day(s) which contain
a total of 79 files changed, 5275 insertions(+), 600 deletions(-).
The main changes are:
1) Basic BTF validation in libbpf, from Andrii Nakryiko.
2) bpf_assert(), bpf_throw(), exceptions in bpf progs, from Kumar Kartikeya Dwivedi.
3) next_thread cleanups, from Oleg Nesterov.
4) Add mcpu=v4 support to arm32, from Puranjay Mohan.
5) Add support for __percpu pointers in bpf progs, from Yonghong Song.
6) Fix bpf tailcall interaction with bpf trampoline, from Leon Hwang.
7) Raise irq_work in bpf_mem_alloc while irqs are disabled to improve refill probabablity, from Hou Tao.
Please consider pulling these changes from:
git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next.git
Thanks a lot!
Also thanks to reporters, reviewers and testers of commits in this pull-request:
Alan Maguire, Andrey Konovalov, Dave Marchevsky, "Eric W. Biederman",
Jiri Olsa, Maciej Fijalkowski, Quentin Monnet, Russell King (Oracle),
Song Liu, Stanislav Fomichev, Yonghong Song
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Russell King says:
====================
net: phy: avoid race when erroring stopping PHY
This series addresses a problem reported by Jijie Shao where the PHY
state machine can race with phy_stop() leading to an incorrect state.
The issue centres around phy_state_machine() dropping the phydev->lock
mutex briefly, which allows phy_stop() to get in half-way through the
state machine, and when the state machine resumes, it overwrites
phydev->state with a value incompatible with a stopped PHY. This causes
a subsequent phy_start() to issue a warning.
We address this firstly by using versions of functions that do not take
tne lock, moving them into the locked region. The only function that
this can't be done with is phy_suspend() which needs to call into the
driver without taking the lock.
For phy_suspend(), we split the state machine into two parts - the
initial part which runs under the phydev->lock, and the second part
which runs without the lock.
We finish off by using the split state machine in phy_stop() which
removes another unnecessary unlock-lock sequence from phylib.
Changes from RFC:
- Added Jijie Shao's tested-by
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Convert phy_stop() to use the new locked-section and unlocked-section
parts of the PHY state machine.
Tested-by: Jijie Shao <shaojijie@huawei.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Split out the locked and unlocked sections of phy_state_machine() into
two separate functions which can be called inside the phydev lock and
outside the phydev lock as appropriate, thus allowing us to combine
the locked regions in the caller of phy_state_machine() with the
locked region inside phy_state_machine().
This avoids unnecessarily dropping the phydev lock which may allow
races to occur.
Tested-by: Jijie Shao <shaojijie@huawei.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Move phy_state_machine() before phy_stop() to avoid subsequent patches
introducing forward references.
Tested-by: Jijie Shao <shaojijie@huawei.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Move the call to phy_suspend() to the end of phy_state_machine() after
we release the lock so that we can combine the locked areas.
phy_suspend() can not be called while holding phydev->lock as it has
caused deadlocks in the past.
Tested-by: Jijie Shao <shaojijie@huawei.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Move the call to start auto-negotiation inside the lock in the PHYLIB
state machine, calling the locked variant _phy_start_aneg(). This
avoids unnecessarily releasing and re-acquiring the lock.
Tested-by: Jijie Shao <shaojijie@huawei.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Move the locking out of phy_error_precise() and to its only call site,
merging with the locked region that has already been taken.
Tested-by: Jijie Shao <shaojijie@huawei.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
phy_stop() calls phy_process_state_change() while holding the phydev
lock, so also arrange for phy_state_machine() to do the same, so that
this function is called with consistent locking.
Tested-by: Jijie Shao <shaojijie@huawei.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch adds partial Access Control List (ACL) support for the
ksz9477 family of switches. ACLs enable filtering of incoming layer 2
MAC, layer 3 IP, and layer 4 TCP/UDP packets on each port. They provide
additional capabilities for filtering routed network protocols and can
take precedence over other forwarding functions.
ACLs can filter ingress traffic based on header fields such as
source/destination MAC address, EtherType, IPv4 address, IPv4 protocol,
UDP/TCP ports, and TCP flags. The ACL is an ordered list of up to 16
access control rules programmed into the ACL Table. Each entry specifies
a set of matching conditions and action rules for controlling packet
forwarding and priority.
The ACL also implements a count function, generating an interrupt
instead of a forwarding action. It can be used as a watchdog timer or an
event counter. The ACL consists of three parts: matching rules, action
rules, and processing entries. Multiple match conditions can be either
AND'ed or OR'ed together.
This patch introduces support for a subset of the available ACL
functionality, specifically layer 2 matching and prioritization of
matched packets. For example:
tc qdisc add dev lan2 clsact
tc filter add dev lan2 ingress protocol 0x88f7 flower action skbedit prio 7
tc qdisc add dev lan1 clsact
tc filter add dev lan1 ingress protocol 0x88f7 flower action skbedit prio 7
The hardware offloading implementation was benchmarked against a
configuration without hardware offloading. This latter setup relied on a
software-based Linux bridge. No noticeable differences were observed
between the two configurations. Here is an example of software-based
test:
ip l s dev enu1u1 up
ip l s dev enu1u2 up
ip l s dev enu1u4 up
ethtool -A enu1u1 autoneg off rx off tx off
ethtool -A enu1u2 autoneg off rx off tx off
ethtool -A enu1u4 autoneg off rx off tx off
ip l a name br0 type bridge
ip l s dev br0 up
ip l s enu1u1 master br0
ip l s enu1u2 master br0
ip l s enu1u4 master br0
tc qdisc add dev enu1u1 root handle 1: ets strict 4 priomap 3 3 2 2 1 1 0 0
tc qdisc add dev enu1u4 root handle 1: ets strict 4 priomap 3 3 2 2 1 1 0 0
tc qdisc add dev enu1u2 root handle 1: ets strict 4 priomap 3 3 2 2 1 1 0 0
tc qdisc add dev enu1u1 clsact
tc filter add dev enu1u1 ingress protocol ipv4 flower action skbedit prio 7
tc qdisc add dev enu1u4 clsact
tc filter add dev enu1u4 ingress protocol ipv4 flower action skbedit prio 0
On a system attached to the port enu1u2 I run two iperf3 server
instances:
iperf3 -s -p 5210 &
iperf3 -s -p 5211 &
On systems attached to enu1u4 and enu1u1 I run:
iperf3 -u -c 172.17.0.1 -p 5210 -b100M -l1472 -t100
and
iperf3 -u -c 172.17.0.1 -p 5211 -b100M -l1472 -t100
As a result, IP traffic on port enu1u1 will be prioritized and take
precedence over IP traffic on port enu1u4
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Right now, the *_port_setup code is in dsa_switch_ops::port_enable(),
which is not the best place for it. This patch moves it to a more
suitable place, dsa_switch_ops::port_setup(), to match the function's
purpose and name.
This patch is a preparation for coming ACL support patch.
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jiri Pirko says:
====================
expose devlink instances relationships
From: Jiri Pirko <jiri@nvidia.com>
Currently, the user can instantiate new SF using "devlink port add"
command. That creates an E-switch representor devlink port.
When user activates this SF, there is an auxiliary device created and
probed for it which leads to SF devlink instance creation.
There is 1:1 relationship between E-switch representor devlink port and
the SF auxiliary device devlink instance.
Also, for example in mlx5, one devlink instance is created for
PCI device and one is created for an auxiliary device that represents
the uplink port. The relation between these is invisible to the user.
Patches #1-#3 and #5 are small preparations.
Patch #4 adds netnsid attribute for nested devlink if that in a
different namespace.
Patch #5 is the main one in this set, introduces the relationship
tracking infrastructure later on used to track SFs, linecards and
devlink instance relationships with nested devlink instances.
Expose the relation to the user by introducing new netlink attribute
DEVLINK_PORT_FN_ATTR_DEVLINK which contains the devlink instance related
to devlink port function. This is done by patch #8.
Patch #9 implements this in mlx5 driver.
Patch #10 converts the linecard nested devlink handling to the newly
introduced rel infrastructure.
Patch #11 benefits from the rel infra and introduces possiblitily to
have relation between devlink instances.
Patch #12 implements this in mlx5 driver.
Examples:
$ devlink dev
pci/0000:08:00.0: nested_devlink auxiliary/mlx5_core.eth.0
pci/0000:08:00.1: nested_devlink auxiliary/mlx5_core.eth.1
auxiliary/mlx5_core.eth.1
auxiliary/mlx5_core.eth.0
$ devlink port add pci/0000:08:00.0 flavour pcisf pfnum 0 sfnum 106
pci/0000:08:00.0/32768: type eth netdev eth4 flavour pcisf controller 0 pfnum 0 sfnum 106 splittable false
function:
hw_addr 00:00:00:00:00:00 state inactive opstate detached roce enable
$ devlink port function set pci/0000:08:00.0/32768 state active
$ devlink port show pci/0000:08:00.0/32768
pci/0000:08:00.0/32768: type eth netdev eth4 flavour pcisf controller 0 pfnum 0 sfnum 106 splittable false
function:
hw_addr 00:00:00:00:00:00 state active opstate attached roce enable nested_devlink auxiliary/mlx5_core.sf.2
$ devlink port show pci/0000:08:00.0/32768
pci/0000:08:00.0/32768: type eth netdev eth4 flavour pcisf controller 0 pfnum 0 sfnum 106 splittable false
function:
hw_addr 00:00:00:00:00:00 state active opstate attached roce enable nested_devlink auxiliary/mlx5_core.sf.2 nested_devlink_netns ns1
====================
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Benefit from the previous commit introducing exposure of devlink
instances relationship and set the nested instance for en auxiliary
device.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In mlx5, there is a devlink instance created for PCI device. Also, one
separate devlink instance is created for auxiliary device that
represents the netdev of uplink port. This relation is currently
invisible to the devlink user.
Benefit from the rel infrastructure and allow for nested devlink
instance to set the relationship for the nested-in devlink instance.
Note that there may be many nested instances, therefore use xarray to
hold the list of rel_indexes for individual nested instances.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Benefit from the newly introduced rel infrastructure, treat the linecard
nested devlink instances in the same way as port function instances.
Convert the code to use the rel infrastructure.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Benefit from the existence of internal mlx5 notifier and extend it by
event MLX5_DRIVER_EVENT_SF_PEER_DEVLINK. Use this event from SF
auxiliary device probe/remove functions to pass the registered SF
devlink instance to the SF representor.
Process the new event in SF representor code and call
devl_port_fn_devlink_set() to do the assignments. Implement this in work
to avoid possible deadlock when probe/remove function of SF may be
called with devlink instance lock held during devlink reload.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Introduce a new helper devl_port_fn_devlink_set() to be used by driver
assigning a devlink instance to the peer devlink port function.
Expose this to user over new netlink attribute nested under port
function nest to expose devlink handle related to the port function.
This is particularly helpful for user to understand the relationship
between devlink instances created for SFs and the port functions
they belong to.
Note that caller of devlink_port_notify() needs to hold devlink
instance lock, put the assertion to devl_port_fn_devlink_set() to make
this requirement explicit. Also note the limitations that only allow to
make this assignment for registered objects.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
It is a bit tricky to maintain relationship between devlink objects and
nested devlink instances due to following aspects:
1) Locking. It is necessary to lock the devlink instance that contains
the object first, only after that to lock the nested instance.
2) Lifetimes. Objects (e.g devlink port) may be removed before
the nested devlink instance.
3) Notifications. If nested instance changes (e.g. gets
registered/unregistered) the nested-in object needs to send
appropriate notifications.
Resolve this by introducing an xarray that holds 1:1 relationships
between devlink object and related nested devlink instance.
Use that xarray index to get the object/nested devlink instance on
the other side.
Provide necessary helpers:
devlink_rel_nested_in_add/clear() to add and clear the relationship.
devlink_rel_nested_in_notify() to call the nested-in object to send
notifications during nested instance register/unregister/netns
change.
devlink_rel_devlink_handle_put() to be used by nested-in object fill
function to fill the nested handle.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
As the next patch is going to call this helper with need to fill another
type of nested attribute, pass it over function arg.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
As the next patch is going to call this helper out of the linecard.c,
move to netlink.c.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
If netns of devlink instance and nested devlink instance differs,
put netnsid attr to indicate that.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
