IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
Implement hwmon API for reading/setting slow and fast PPT limit.
APU power is managed to system-level requirements through the PPT
(package power tracking) feature. PPT is intended to limit power to the
requirements of the power source and could be dynamically updated to
maximize APU performance within the system power budget.
Here FAST_PPT_LIMIT manages the ~10 ms moving average of APU power,
while SLOW_PPT_LIMIT manages the configurable, thermally significant
moving average of APU power (default ~5000 ms).
User could read slow/fast ppt limit using command "cat power*_cap" or
"sensors" in the hwmon device directory. User could adjust values of
slow/fast ppt limit as needed depending on workloads through command
"echo ## > power*_cap".
Example:
$ echo 15000000 > power1_cap
$ echo 18000000 > power2_cap
$ sensors
amdgpu-pci-0300
Adapter: PCI adapter
slowPPT: 9.04W (cap = 15.00 W)
fastPPT: 9.04W (cap = 18.00 W)
v2: align with existing interfaces for the getting/setting of PPT
limits. Encode the upper 8 bits of limit value to distinguish
slow and fast power limit type.
Signed-off-by: Xiaomeng Hou <Xiaomeng.Hou@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The original smu_get_power_limit callback accepts the power limit level
parameter as bool which limits to max and current. For possible needs to
retrieve other level like min, extend the parameter type using enum.
Signed-off-by: Xiaomeng Hou <Xiaomeng.Hou@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
To achieve the best QoS for high priority compute jobs it is
required to limit waves on other compute pipes as well.
This patch will set min value in non high priority
mmSPI_WCL_PIPE_PERCENT_CS[0-3] registers to minimize the
impact of normal/low priority compute jobs over high priority
compute jobs.
Signed-off-by: Nirmoy Das <nirmoy.das@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
On DCN1.0, need otg vertical line interrupt to get appropriate timing
to achieve specific feature request.
Add otg vertical interrupt0 support for registers which operation is
vertical sensitive.
Signed-off-by: Wayne Lin <Wayne.Lin@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
In order to get appropriate timing for registers which
read/write is vertical line sensitive, add new IRQ source variable.
This interrupt is triggered by specific vertical line,
Signed-off-by: Wayne Lin <Wayne.Lin@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Switch to smuio callbacks: use smuio v11_0_6 callbacks for
Sienna_cichlid and forward ASIC, use smuio v11_0 callbacks for the
other NV family ASIC.
Signed-off-by: Likun Gao <Likun.Gao@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Enable DCS
V1: Enable Async DCS.
V2: Add the ppfeaturemask bit to enable from the modprobe parameter.
V3:
1. add the flag to skip APU support.
2. remove the hunk for workload selection since
it doesn't impact the function.
Signed-off-by: Kenneth Feng <kenneth.feng@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Instead of caching the value during amdgpu_device_init, just call the
function directly. This avoids issues where the unique_id hasn't been
saved by the time that KFD's topology snapshot is done (e.g. Arcturus).
KFD's topology information from the amdgpu_device was initially cached
at KFD initialization due to amdkfd and amdgpu being separate modules.
Now that they are combined together, we can directly call the functions
that we need and avoid this unnecessary duplication and complexity.
As a side-effect of this change, we also remove unique_id=0 for CPUs,
which is obviously not unique.
v2: Drop previous patch printing unique_id in hex
Signed-off-by: Kent Russell <kent.russell@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The power limit and clock ragne are different in AC mode and DC mode.
Firmware does the setting after this feature is enabled.
Signed-off-by: Kenneth Feng <kenneth.feng@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Enable gfx wave limiting for gfx jobs before pushing high priority
compute jobs so that high priority compute jobs gets more resources
to finish early.
v2: use ring priority instead of job priority.
Signed-off-by: Nirmoy Das <nirmoy.das@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Wave limiting can be use to load balance high priority
compute jobs along with gfx jobs. When enabled, this will reserve
~75% of waves for compute jobs.
We do not need this from gfx10 onwards because >=gfx10 has
asynchronous compute tunneling to replace wave limit requirement.
Signed-off-by: Nirmoy Das <nirmoy.das@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
For high priority compute to work properly we need to enable
wave limiting on gfx pipe. Wave limiting is done through writing
into mmSPI_WCL_PIPE_PERCENT_GFX register. Enable only one high
priority compute queue to avoid race condition between multiple
high priority compute queues writing that register simultaneously.
Signed-off-by: Nirmoy Das <nirmoy.das@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch consist of below related changes:
1 Rename ring->priority to ring->hw_prio.
2 Assign correct hardware ring priority.
3 Remove ring->priority_mutex as ring priority remains unchanged
after initialization.
4 Remove unused ring->num_jobs.
v3: remove ring->num_jobs.
v2: remove ring->priority_mutex.
Fixes: 33abcb1f5a ("drm/amdgpu: set compute queue priority at mqd_init")
Signed-off-by: Nirmoy Das <nirmoy.das@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
The dm struct is only being used if DCN config is defined and this
causes a unused variable warning if DCN option is not set.
[How]
Remove the compile flag so the variable is used (there also seems to be
a duplicate guard due to a bad rebase) so remove the outer guard to fix
the warning.
Fixes this warning
drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c: In function 'dm_set_vblank':
drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c:5380:33: warning: unused variable 'dm' [-Wunused-variable]
Fixes: 98ab5f3513 ("drm/amd/display: Fix deadlock during gpu reset v3")
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This reverts commit 4c3a329273.
Bhawan's fix is better (less ifdefs), so revert this and apply Bhawan's.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
amd-drm-next-5.12-2021-02-03:
amdgpu:
- Display fixes and cleanups
- Vangogh fixes
- Fix possible race when there are timeouts on two rings
- SR-IOV fixes
- Add missing license
- DCE 10/12 bpc fixes
- Display MALL fixes
- Fix SMU user preference settings persistence
- Fix retry in gem allocate
- Add new PCI DID
- Fix for manual fan speed control on cards where it was problematic
- Fix regression in pinning GTT
- Misc display fixes
- Misc code cleanups
amdkfd:
- Fix config handling
- Fix regression in buffer free
From: Alex Deucher <alexdeucher@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210204045717.3823-1-alexander.deucher@amd.com
Signed-off-by: Dave Airlie <airlied@redhat.com>
Current implementation of mtk_dither_set() cast dev data to
struct mtk_ddp_comp_dev. But other devices with different dev data
would also call this function.
Separate necessary parameters out so other device components (dither,
gamma) can call this function.
Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org>
Reviewed-by: CK Hu <ck.hu@mediatek.com>
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Moving mutex resource management from client driver to mutex driver
could prevent client drivers negotiating for resource management.
Signed-off-by: CK Hu <ck.hu@mediatek.com>
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
mtk mutex is used by both drm and mdp driver, so change disp/ddp term to
mutex to show that it's a common driver for drm and mdp.
Signed-off-by: CK Hu <ck.hu@mediatek.com>
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
After mmsys routing function is moved out of mtk_drm_ddp.c, mtk_drm_ddp.c
has only mtk mutex function, so rename it to match the function in it.
Signed-off-by: CK Hu <ck.hu@mediatek.com>
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Get the fifo size from device tree
because each rdma in the same SoC may have different fifo size
Signed-off-by: Yongqiang Niu <yongqiang.niu@mediatek.com>
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
The orginal setting is not correct, fix it to follow hardware data sheet.
If keep this error setting, mt8173/mt8183 display ok
but mt8192 display abnormal.
Fixes: 0664d1392c ("drm/mediatek: Add AAL engine basic function")
Signed-off-by: Yongqiang Niu <yongqiang.niu@mediatek.com>
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Similar to commit a9d9fea74b
("drm/mediatek: mtk_dsi: Create connector for bridges"):
Use the drm_bridge_connector helper to create a connector for pipelines
that use drm_bridge. This allows splitting connector operations across
multiple bridges when necessary, instead of having the last bridge in
the chain creating the connector and handling all connector operations
internally.
Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org>
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
It's possible that state->base.fb is null. Add a check before access its
format.
Fixes: b6b1bb980e ("drm/mediatek: Turn off Alpha bit when plane format has no alpha")
Signed-off-by: Yongqiang Niu <yongqiang.niu@mediatek.com>
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
