IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
ata_read_log_page() first tries to read the log using READ LOG DMA EXT.
If that fails it will instead try to read the log using READ LOG EXT.
ata_exec_internal_sg() is synchronous, so it will wait for the command to
finish. If we actually got an error back from the device, it is correct
to retry. However, if the command timed out, ata_exec_internal_sg() will
freeze the port.
There is no point in retrying if the port is frozen, as
ata_exec_internal_sg() will return AC_ERR_SYSTEM on a frozen port,
without ever sending the command down to the drive.
Therefore, avoid retrying if the first command froze the port, as that
will result in a misleading AC_ERR_SYSTEM error print, instead of printing
the error that actually caused the port to be frozen (AC_ERR_TIMEOUT).
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Clean up the code by making use of the newly introduced
ata_port_is_frozen() helper function.
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
* Print the timeout value for internal command failures due to a
timeout (from Tomas).
* Improve parameter names in ata_dev_set_feature() to clarify this
function use (from Niklas).
* Improve the ahci driver low power mode setting initialization to allow
more flexibility for the user (from Rafael).
* Several patches to remove redundant variables in libata-core,
libata-eh and the pata_macio driver and to fix typos in comments (from
Jinpeng, Shaomin, Ye).
* Some code simplifications and macro renaming (for clarity) in various
functions of libata-core (from me).
* Add a missing check for a potential failure of sata_scr_read() in
sata_print_link_status() (from Li).
* Cleanup of libata Kconfig PATA_PLATFORM and PATA_OF_PLATFORM options
(from Lukas).
* Cleanups of ata dt-bindings and improvements of libahci_platform, ahci
and libahci code (from Serge)
* New driver for Synopsys AHCI SATA controllers, based of the generic
ahci code (from Serge). One compilation warning fix is added for this
driver (from me).
* Several fixes to macros used to discover a drive capabilities to be
consistent with the ACS specifications (from Niklas).
* A couple of simplifcations to some libata functions, removing
unnecessary arguments (from Niklas).
* An improvements to libata-eh code to avoid unnecessary link reset when
revalidating a drive after a failed command. In practice, this extra,
unneeded reset, reset does not cause any arm beyond slightly slowing
down error recovery (from Niklas).
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQSRPv8tYSvhwAzJdzjdoc3SxdoYdgUCYz0asgAKCRDdoc3SxdoY
drHoAQCJhb6MuQHzbN/wR5cTGAfWXQJWBJx2mJr7oKJCrB34PwD/RzphcsuaXDta
kwbTGlpitegByZTDKt9eMRLWmKgyngw=
=CnJj
-----END PGP SIGNATURE-----
Merge tag 'ata-6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata
Pull ata updates from Damien Le Moal:
- Print the timeout value for internal command failures due to a
timeout (from Tomas)
- Improve parameter names in ata_dev_set_feature() to clarify this
function use (from Niklas)
- Improve the ahci driver low power mode setting initialization to
allow more flexibility for the user (from Rafael)
- Several patches to remove redundant variables in libata-core,
libata-eh and the pata_macio driver and to fix typos in comments
(from Jinpeng, Shaomin, Ye)
- Some code simplifications and macro renaming (for clarity) in various
functions of libata-core (from me)
- Add a missing check for a potential failure of sata_scr_read() in
sata_print_link_status() (from Li)
- Cleanup of libata Kconfig PATA_PLATFORM and PATA_OF_PLATFORM options
(from Lukas)
- Cleanups of ata dt-bindings and improvements of libahci_platform,
ahci and libahci code (from Serge)
- New driver for Synopsys AHCI SATA controllers, based of the generic
ahci code (from Serge). One compilation warning fix is added for this
driver (from me)
- Several fixes to macros used to discover a drive capabilities to be
consistent with the ACS specifications (from Niklas)
- A couple of simplifcations to some libata functions, removing
unnecessary arguments (from Niklas)
- An improvements to libata-eh code to avoid unnecessary link reset
when revalidating a drive after a failed command. In practice, this
extra, unneeded reset, reset does not cause any arm beyond slightly
slowing down error recovery (from Niklas)
* tag 'ata-6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata: (45 commits)
ata: libata-eh: avoid needless hard reset when revalidating link
ata: libata: drop superfluous ata_eh_analyze_tf() parameter
ata: libata: drop superfluous ata_eh_request_sense() parameter
ata: fix ata_id_has_dipm()
ata: fix ata_id_has_ncq_autosense()
ata: fix ata_id_has_devslp()
ata: fix ata_id_sense_reporting_enabled() and ata_id_has_sense_reporting()
ata: libata-eh: Remove the unneeded result variable
ata: ahci_st: Enable compile test
ata: ahci_st: Fix compilation warning
MAINTAINERS: Add maintainers for DWC AHCI SATA driver
ata: ahci-dwc: Add Baikal-T1 AHCI SATA interface support
ata: ahci-dwc: Add platform-specific quirks support
dt-bindings: ata: ahci: Add Baikal-T1 AHCI SATA controller DT schema
ata: ahci: Add DWC AHCI SATA controller support
ata: libahci_platform: Add function returning a clock-handle by id
dt-bindings: ata: ahci: Add DWC AHCI SATA controller DT schema
ata: ahci: Introduce firmware-specific caps initialization
ata: ahci: Convert __ahci_port_base to accepting hpriv as arguments
ata: libahci: Don't read AHCI version twice in the save-config method
...
Commit 1527f69204fe ("ata: ahci: Add Green Sardine vendor ID as
board_ahci_mobile") added an explicit entry for AMD Green Sardine
AHCI controller using the board_ahci_mobile configuration (this
configuration has later been renamed to board_ahci_low_power).
The board_ahci_low_power configuration enables support for low power
modes.
This explicit entry takes precedence over the generic AHCI controller
entry, which does not enable support for low power modes.
Therefore, when commit 1527f69204fe ("ata: ahci: Add Green Sardine
vendor ID as board_ahci_mobile") was backported to stable kernels,
it make some Pioneer optical drives, which was working perfectly fine
before the commit was backported, stop working.
The real problem is that the Pioneer optical drives do not handle low
power modes correctly. If these optical drives would have been tested
on another AHCI controller using the board_ahci_low_power configuration,
this issue would have been detected earlier.
Unfortunately, the board_ahci_low_power configuration is only used in
less than 15% of the total AHCI controller entries, so many devices
have never been tested with an AHCI controller with low power modes.
Fixes: 1527f69204fe ("ata: ahci: Add Green Sardine vendor ID as board_ahci_mobile")
Cc: stable@vger.kernel.org
Reported-by: Jaap Berkhout <j.j.berkhout@staalenberk.nl>
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
sata_scr_read() could return negative error code on failure. Check the
return value when reading the control register.
Signed-off-by: Li Zhong <floridsleeves@gmail.com>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Since ata_build_rw_tf() is only called from ata_scsi_rw_xlat() with the
tf, dev and tag arguments obtained from the queued command structure,
we can simplify the interface of ata_build_rw_tf() by passing directly
the qc structure as argument.
Furthermore, since ata_scsi_rw_xlat() is never used for internal
commands, we can also remove the internal tag check for the NCQ case.
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Rename ATA_DFLAG_NCQ_PRIO_ENABLE to ATA_DFLAG_NCQ_PRIO_ENABLED to match
the fact that this flags indicates if NCQ priority use is enabled by the
user.
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Return value from ata_exec_internal() directly instead of
taking this in another redundant variable.
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: Jinpeng Cui <cui.jinpeng2@zte.com.cn>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
ata_dev_set_feature() is currently used for enabling/disabling any ATA
feature, e.g. SETFEATURES_SPINUP and SETFEATURE_SENSE_DATA, i.e. it is
not only used to enable/disable SATA specific features.
For most features, the enable/disable bit is specified in the subcommand
specific field "count".
It is only for the specific subcommands "Enable SATA feature" (0x10) and
"Disable SATA feature" (0x90) where the field "count" is used to specify
a feature instead of enable/disable. The parameter names for this
function are thus quite misleading.
Rename the parameter names to be more generic and in line with ACS-5,
and remove the references to "SATA FEATURES" in the kernel-doc.
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Printing the timeout value may help in troubleshooting failures.
Signed-off-by: David Milburn <dmilburn@redhat.com>
Signed-off-by: Tomas Henzl <thenzl@redhat.com>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Make the 'timeout' parameter to ata_exec_internal_sg() *unsigned int* as
msecs_to_jiffies() that it calls takes just *unsigned int* for the time in
milliseconds. Then follow the suit with ata_exec_internal(), its only
caller; also fix up ata_dev_set_feature(), the only ata_exec_internal()'s
caller that explicitly passes *unsigned long* variable for timeout...
Found by Linux Verification Center (linuxtesting.org) with the SVACE static
analysis tool.
Signed-off-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
ata_exec_internal_sg() is only called by ata_exec_internal() further in
the same file, so we can make it *static* and remove its prototype from
drivers/ata/libata.h...
Suggested-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Signed-off-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
The packed transfer mode masks and also the {pio|mwdma|udma}_mask fields
of *struct*s ata_device and ata_port_info are declared as *unsigned long*
(which is a 64-bit type on 64-bit architectures) but actually the packed
masks occupy only 20 bits (7 PIO modes, 5 MWDMA modes, and 8 UDMA modes)
and the PIO/MWDMA/UDMA masks easily fit into just 8 bits each, so we can
safely use (always 32-bit) *unsigned int* variables instead. This saves
745 bytes of object code in libata-core.o alone, not to mention LLDDs...
Signed-off-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Using *else* after *return* doesn't make much sense -- getting rid of such
*else* branches reduces the indentation levels and thus reduces # of LoC...
Signed-off-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
The code multiplying the # of cylinders/heads/sectors in ata_id_n_sectors()
to get a disk capacity implicitly uses the *int* type for that calculation
and casting the result to 'u64' before returning ensues a sign extension.
Explicitly casting the 'u16' typed multipliers to 'u32' results in avoiding
a sign extension instruction and so in a more compact code...
Found by Linux Verification Center (linuxtesting.org) with the SVACE static
analysis tool.
Signed-off-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
The concurrent positioning ranges log is not a fixed size and may depend
on how many ranges are supported by the device. This patch uses the size
reported in the GPL directory to determine the number of pages supported
by the device before attempting to read this log page.
This resolves this error from the dmesg output:
ata6.00: Read log 0x47 page 0x00 failed, Emask 0x1
Cc: stable@vger.kernel.org
Fixes: fe22e1c2f705 ("libata: support concurrent positioning ranges log")
Signed-off-by: Tyler Erickson <tyler.erickson@seagate.com>
Reviewed-by: Muhammad Ahmad <muhammad.ahmad@seagate.com>
Tested-by: Michael English <michael.english@seagate.com>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
In an unlikely (and probably wrong?) case that the 'ppi' parameter of
ata_host_alloc_pinfo() points to an array starting with a NULL pointer,
there's going to be a kernel oops as the 'pi' local variable won't get
reassigned from the initial value of NULL. Initialize 'pi' instead to
'&ata_dummy_port_info' to fix the possible kernel oops for good...
Found by Linux Verification Center (linuxtesting.org) with the SVACE static
analysis tool.
Signed-off-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
To facilitate debugging of drive issues in the field without kernel
changes (e.g. temporary test patches), add an entry for most horkage
flags in the force_tbl array to allow controlling these horkage
settings with the libata.force kernel boot parameter.
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Similarly to the horkage flags, introduce the force_lflag_onoff() macro
to define struct ata_force_param entries of the force_tbl array that
allow turning on or off a link flag using the libata.force boot
parameter. To be consistent with naming, the macro force_lflag() is
renamed to force_lflag_on().
Using force_lflag_onoff(), define a new force_tbl entry for the
ATA_LFLAG_NO_DEBOUNCE_DELAY link flag, thus allowing testing if an
adapter requires a link debounce delay or not.
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Introduce the macro definitions force_cbl(), force_spd_limit(),
force_xfer(), force_lflag(), force_horkage_on() and
force_horkage_onoff() to define with a more compact syntax the struct
ata_force_param entries in the force_tbl array defined in the function
ata_parse_force_one().
To reduce the indentation of the array declaration, force_tbl definition
is also moved out of the ata_parse_force_one() function. The entries are
also reordered to group them by type of the quirck that is applied.
Finally, fix a comment in ata_parse_force_param() incorrectly
referencing force_tbl instead of ata_force_tbl.
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Remove the unneeded comma after the last field of the array entries.
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Reviewed-by: Hannes Reinecke <hare@suse.de>
and "isn't" with "is not". The former fixes the typo while the latter
just uses the same formal language.
Signed-off-by: Diego Viola <diego.viola@gmail.com>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
The data transfer mode that corresponds to the 'xfer_mode' parameter for
ata_xfer_mode2shift() is a 8-bit *unsigned* value. Using *unsigned long*
to declare the parameter leads to a problematic implicit *int* to *unsigned
long* cast and was most probably a result of a copy/paste mistake -- use
the 'u8' type instead, as in ata_xfer_mode2mask()...
Found by Linux Verification Center (linuxtesting.org) with the SVACE static
analysis tool.
Signed-off-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Improve ATA queued command allocation as follows:
- For attaining a qc tag for a SAS host we need to allocate a bit in
ata_port.sas_tag_allocated bitmap.
However we already have a unique tag per device in range
[0, ATA_MAX_QUEUE -1] in the scsi cmnd budget token, so just use that
instead.
- It is a bit pointless to have ata_qc_new_init() in libata-core.c since it
pokes scsi internals, so inline it in ata_scsi_qc_new() (in
libata-scsi.c). Also update Doc accordingly.
- Use standard SCSI helpers set_host_byte() and set_status_byte() in
ata_scsi_qc_new().
Christoph Hellwig originally contributed the change to inline
ata_qc_new_init().
Signed-off-by: John Garry <john.garry@huawei.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Samsung' 840 EVO with the latest firmware (EXT0DB6Q) locks up with
the a message: "READ LOG DMA EXT failed, trying PIO" during boot.
Initially this was discovered because it caused a crash
with the sata_dwc_460ex controller on a WD MyBook Live DUO.
The reporter "Tice Rex" which has the unique opportunity that he
has two Samsung 840 EVO SSD! One with the older firmware "EXT0BB0Q"
which booted fine and didn't expose "READ LOG DMA EXT". But the
newer/latest firmware "EXT0DB6Q" caused the headaches.
BugLink: https://github.com/openwrt/openwrt/issues/9505
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
For this cycle, no big change but many small fixes and code cleanup to
libata, the ahci driver and various pata drivers. In more details:
* Code simplification in pata_platform using platform_get_mem_or_io(),
from Lad.
* Fix read-only arrays declarations as const in pata_atiixp and
pata_pdc202xx_old, from Colin.
* Various cleanups and code simplification in libata-scsi, from me.
* Remove dead code in libata-acpi, from Sergey.
* Skip device scan deboune delay for Marvell 88SE9235 adapters (ahci) to
speedup boot, from Paul.
* Simplify functions declaration and use for functions always returning
0 in libata-core, from Sergey.
* Non-fatal error fixes and in the pata_hpt366 and pata_hpt3x2n drivers,
from Sergey.
* Various code cleanup in the pata_artop, pata_hpt37x, pata_hpt366,
pata_hpt3x2n, pata_samsung_cf and sata_rcar drivers, from Sergey.
* Some libata-sff and libata-scsi code cleanup (e.g. change functions
to return "bool"), from Sergey.
* Renae ahci_board_mobile to board_ahci_low_power to be more descriptive
of the feature as that is also used on PC and server AHCI adapters,
from Mario.
* Cleanup of OF match tables, from Geert.
* Simplify the pata_pxa driver initialization using platform_get_irq(),
from Minghao.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQSRPv8tYSvhwAzJdzjdoc3SxdoYdgUCYjlsYwAKCRDdoc3SxdoY
dn35AP43C5aPtM1JDd+uGZ6JC5QsFPsHYtsX3S7UsO5QhtFeXgD/d+XVYt+pD7wk
WEaUpH9bB0jRuEFp9yISZeqJzxeuzw8=
=nxBY
-----END PGP SIGNATURE-----
Merge tag 'ata-5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata
Pull ata updates from Damien Le Moal:
"For this cycle, no big change but many small fixes and code cleanup to
libata, the ahci driver and various pata drivers. In more details:
- Code simplification in pata_platform using
platform_get_mem_or_io(), from Lad.
- Fix read-only arrays declarations as const in pata_atiixp and
pata_pdc202xx_old, from Colin.
- Various cleanups and code simplification in libata-scsi, from me.
- Remove dead code in libata-acpi, from Sergey.
- Skip device scan deboune delay for Marvell 88SE9235 adapters (ahci)
to speedup boot, from Paul.
- Simplify functions declaration and use for functions always
returning 0 in libata-core, from Sergey.
- Non-fatal error fixes and in the pata_hpt366 and pata_hpt3x2n
drivers, from Sergey.
- Various code cleanup in the pata_artop, pata_hpt37x, pata_hpt366,
pata_hpt3x2n, pata_samsung_cf and sata_rcar drivers, from Sergey.
- Some libata-sff and libata-scsi code cleanup (e.g. change functions
to return "bool"), from Sergey.
- Renae ahci_board_mobile to board_ahci_low_power to be more
descriptive of the feature as that is also used on PC and server
AHCI adapters, from Mario.
- Cleanup of OF match tables, from Geert.
- Simplify the pata_pxa driver initialization using
platform_get_irq(), from Minghao"
* tag 'ata-5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata: (38 commits)
ata: pata_pxa: Use platform_get_irq() to get the interrupt
ata: Drop commas after OF match table sentinels
ata: ahci: Rename CONFIG_SATA_LPM_MOBILE_POLICY configuration item
ata: ahci: Rename `AHCI_HFLAG_IS_MOBILE`
ata: ahci: Rename board_ahci_mobile
ata: pata_hpt37x: merge transfer mode setting methods
ata: libata-sff: use *switch* statement in ata_sff_dev_classify()
ata: add/use ata_taskfile::{error|status} fields
ata: Kconfig: fix sata gemini compile test condition
ata: libata-scsi: use *switch* statements to check SCSI command codes
ata: libata-sff: refactor ata_sff_altstatus()
ata: libata-sff: refactor ata_sff_set_devctl()
ata: libata-sff: make ata_resources_present() return 'bool'
ata: pata_hpt3x2n: disable fast interrupts in prereset() method
ata: pata_hpt37x: disable fast interrupts in prereset() method
ata: pata_hpt366: disable fast interrupts in prereset() method
ata: pata_mpc52xx: use GFP_KERNEL
ata: sata_rcar: drop unused #define's
ata: pata_hpt366: check channel enable bits
ata: sata_rcar: make sata_rcar_ata_devchk() return 'bool'
...
Add the explicit error and status register fields to 'struct ata_taskfile'
using the anonymous *union*s ('struct ide_taskfile' had that for ages!) and
update the libata taskfile code accordingly. There should be no object code
changes resulting from that...
Signed-off-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
ata_host_suspend() always returns 0, so the result checks in many drivers
look pointless. Let's make this function return *void* instead of *int*.
Found by Linux Verification Center (linuxtesting.org) with the SVACE static
analysis tool.
Signed-off-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
This device is a CF card, or possibly an SSD in CF form factor.
It supports NCQ and high speed DMA.
While it also advertises TRIM support, I/O errors are reported
when the discard mount option fstrim is used. TRIM also fails
when disabling NCQ and not just as an NCQ command.
TRIM must be disabled for this device.
Signed-off-by: Zoltán Böszörményi <zboszor@gmail.com>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
The concurrent positioning ranges log page 47h is a general purpose log
page and not a subpage of the indentify device log. Using
ata_identify_page_supported() to test for concurrent positioning ranges
support is thus wrong. ata_log_supported() must be used.
Furthermore, unlike other advanced ATA features (e.g. NCQ priority),
accesses to the concurrent positioning ranges log page are not gated by
a feature bit from the device IDENTIFY data. Since many older drives
react badly to the READ LOG EXT and/or READ LOG DMA EXT commands isued
to read device log pages, avoid problems with older drives by limiting
the concurrent positioning ranges support detection to drives
implementing at least the ACS-4 ATA standard (major version 11). This
additional condition effectively turns ata_dev_config_cpr() into a nop
for older drives, avoiding problems in the field.
Fixes: fe22e1c2f705 ("libata: support concurrent positioning ranges log")
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=215519
Cc: stable@vger.kernel.org
Reviewed-by: Hannes Reinecke <hare@suse.de>
Tested-by: Abderraouf Adjal <adjal.arf@gmail.com>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
06f6c4c6c3e8 ("ata: libata: add missing ata_identify_page_supported() calls")
introduced additional calls to ata_identify_page_supported(), thus also
adding indirectly accesses to the device log directory log page through
ata_log_supported(). Reading this log page causes SATADOM-ML 3ME devices
to lock up.
Introduce the horkage flag ATA_HORKAGE_NO_LOG_DIR to prevent accesses to
the log directory in ata_log_supported() and add a blacklist entry
with this flag for "SATADOM-ML 3ME" devices.
Fixes: 636f6e2af4fb ("libata: add horkage for missing Identify Device log")
Cc: stable@vger.kernel.org # v5.10+
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
ata_std_prereset() always returns 0, hence the check in ata_sff_prereset()
is pointless and thus it also can return only 0 (however, we cannot change
the prototypes of ata_{sff|std}_prereset() as they implement the driver's
prereset() method).
Found by Linux Verification Center (linuxtesting.org) with the SVACE static
analysis tool.
Signed-off-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Drivers that need to tweak a device IDENTIFY data implement the
read_id() port operation. The IDENTIFY data buffer is passed as an
argument to the read_id() operation for drivers to use. However, when
this operation is called, the IDENTIFY data is not yet converted to CPU
endian and contains le16 words.
Change the interface of the read_id operation to pass a __le16 * pointer
to the IDENTIFY data buffer to clarify the buffer endianness. Fix the
pata_netcell, pata_it821x, ahci_xgene, ahci_ceva and ahci_brcm drivers
implementation of this operation and modify the code to corretly deal
with identify data words manipulation to avoid sparse warnings such as:
drivers/ata/ahci_xgene.c:262:33: warning: invalid assignment: &=
drivers/ata/ahci_xgene.c:262:33: left side has type unsigned short
drivers/ata/ahci_xgene.c:262:33: right side has type restricted __le16
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Callers are already protected by ata_dev_print_info(), so no need
to have an additional configuration parameter here.
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Convert the sole caller to ata_dev_dbg() and remove the definition.
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
All callsites have been converted to dynamic debugging.
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
The WARN level was always enabled, so drop ata_msg_warn().
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
The one caller have been converted to dynamic debugging.
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Most of the information is already covered by tracepoints
(if not downright pointless), so remove the VPRINTK() calls.
And while we're at it, remove ata_scsi_dump_cdb(), too,
as this information can be retrieved from scsi tracing.
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Replace all DPRINTK calls with ata_dev_dbg().
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Use standard pr_{debug,info,notice,warn,err} macros instead of the
hand-crafted printk helpers.
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Add tracepoints for bus-master DMA and taskfile related functions.
That allows us to drop the relevant DPRINTK() calls.
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Convert the existing ata_qc_issue() tracepoint into a template,
and add tracepoints for ata_qc_prep() and ata_qc_issue() based
on that template.
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
To follow the flow of control we should be using tracepoints, as
they will tie in with the actual I/O flow and deliver a better
overview about what it happening.
This patch adds tracepoints for hard reset, soft reset, and postreset
and adds them in the libata-eh control flow.
With that we can drop the reset DPRINTK calls in the various drivers.
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
With moving ata_dev_dbg() over to dynamic debugging ATA_HORKAGE_DUMP_ID
will now print out the raw IDENTIFY data without a header unless
explicitly enable via dyndebug.
So move the logging level up to INFO and have the header printed
always.
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Use ata_dev_dbg() to print out the information in ata_dump_id()
and remove the ata_msg_probe() conditional.
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Add an ata_port_classify() helper to print out the results from
the device classification and remove the debugging statements
from ata_dev_classify().
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
