IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
Andy Chiu <andy.chiu@sifive.com> says:
This is the v21 patch series for adding Vector extension support in
Linux. Please refer to [1] for the introduction of the patchset. The
v21 patch series was aimed to solve build issues from v19, provide usage
guideline for the prctl interface, and address review comments on v20.
Thank every one who has been reviewing, suggesting on the topic. Hope
this get a step closer to the final merge.
* b4-shazam-merge: (27 commits)
selftests: add .gitignore file for RISC-V hwprobe
selftests: Test RISC-V Vector prctl interface
riscv: Add documentation for Vector
riscv: Enable Vector code to be built
riscv: detect assembler support for .option arch
riscv: Add sysctl to set the default vector rule for new processes
riscv: Add prctl controls for userspace vector management
riscv: hwcap: change ELF_HWCAP to a function
riscv: KVM: Add vector lazy save/restore support
riscv: kvm: Add V extension to KVM ISA
riscv: prevent stack corruption by reserving task_pt_regs(p) early
riscv: signal: validate altstack to reflect Vector
riscv: signal: Report signal frame size to userspace via auxv
riscv: signal: Add sigcontext save/restore for vector
riscv: signal: check fp-reserved words unconditionally
riscv: Add ptrace vector support
riscv: Allocate user's vector context in the first-use trap
riscv: Add task switch support for vector
riscv: Introduce struct/helpers to save/restore per-task Vector state
riscv: Introduce riscv_v_vsize to record size of Vector context
...
Link: https://lore.kernel.org/r/20230605110724.21391-1-andy.chiu@sifive.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
To support Vector extension, the series exports variable-length vector
registers on the signal frame. However, this potentially breaks abi if
processing vector registers is required in the signal handler for old
binaries. For example, there is such need if user-level context switch
is triggerred via signals[1].
For this reason, it is best to leave a decision to distro maintainers,
where the enablement of userspace Vector for new launching programs can
be controlled. Developers may also need the switch to experiment with.
The parameter is configurable through sysctl interface so a distro may
turn off Vector early at init script if the break really happens in the
wild.
The switch will only take effects on new execve() calls once set. This
will not effect existing processes that do not call execve(), nor
processes which has been set with a non-default vstate_ctrl by making
explicit PR_RISCV_V_SET_CONTROL prctl() calls.
Link: https://lore.kernel.org/all/87cz4048rp.fsf@all.your.base.are.belong.to.us/
Signed-off-by: Andy Chiu <andy.chiu@sifive.com>
Reviewed-by: Greentime Hu <greentime.hu@sifive.com>
Reviewed-by: Vincent Chen <vincent.chen@sifive.com>
Reviewed-by: Björn Töpel <bjorn@rivosinc.com>
Link: https://lore.kernel.org/r/20230605110724.21391-23-andy.chiu@sifive.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
This patch add two riscv-specific prctls, to allow usespace control the
use of vector unit:
* PR_RISCV_V_SET_CONTROL: control the permission to use Vector at next,
or all following execve for a thread. Turning off a thread's Vector
live is not possible since libraries may have registered ifunc that
may execute Vector instructions.
* PR_RISCV_V_GET_CONTROL: get the same permission setting for the
current thread, and the setting for following execve(s).
Signed-off-by: Andy Chiu <andy.chiu@sifive.com>
Reviewed-by: Greentime Hu <greentime.hu@sifive.com>
Reviewed-by: Vincent Chen <vincent.chen@sifive.com>
Link: https://lore.kernel.org/r/20230605110724.21391-22-andy.chiu@sifive.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Using a function is flexible to represent ELF_HWCAP. So the kernel may
encode hwcap reflecting supported hardware features just at the moment of
the start of each program.
This will be helpful when we introduce prctl/sysctl interface to control
per-process availability of Vector extension in following patches.
Programs started with V disabled should see V masked off in theirs
ELF_HWCAP.
Signed-off-by: Andy Chiu <andy.chiu@sifive.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20230605110724.21391-21-andy.chiu@sifive.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Early function calls, such as setup_vm(), relocate_enable_mmu(),
soc_early_init() etc, are free to operate on stack. However,
PT_SIZE_ON_STACK bytes at the head of the kernel stack are purposedly
reserved for the placement of per-task register context pointed by
task_pt_regs(p). Those functions may corrupt task_pt_regs if we overlap
the $sp with it. In fact, we had accidentally corrupted sstatus.VS in some
tests, treating the kernel to save V context before V was actually
allocated, resulting in a kernel panic.
Thus, we should skip PT_SIZE_ON_STACK for $sp before making C function
calls from the top-level assembly.
Co-developed-by: ShihPo Hung <shihpo.hung@sifive.com>
Signed-off-by: ShihPo Hung <shihpo.hung@sifive.com>
Co-developed-by: Vincent Chen <vincent.chen@sifive.com>
Signed-off-by: Vincent Chen <vincent.chen@sifive.com>
Signed-off-by: Greentime Hu <greentime.hu@sifive.com>
Signed-off-by: Andy Chiu <andy.chiu@sifive.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Heiko Stuebner <heiko.stuebner@vrull.eu>
Tested-by: Heiko Stuebner <heiko.stuebner@vrull.eu>
Link: https://lore.kernel.org/r/20230605110724.21391-18-andy.chiu@sifive.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Some extensions, such as Vector, dynamically change footprint on a
signal frame, so MINSIGSTKSZ is no longer accurate. For example, an
RV64V implementation with vlen = 512 may occupy 2K + 40 + 12 Bytes of a
signal frame with the upcoming support. And processes that do not
execute any vector instructions do not need to reserve the extra
sigframe. So we need a way to guard the allocation size of the sigframe
at process runtime according to current status of V.
Thus, provide the function sigaltstack_size_valid() to validate its size
based on current allocation status of supported extensions.
Signed-off-by: Andy Chiu <andy.chiu@sifive.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Heiko Stuebner <heiko.stuebner@vrull.eu>
Tested-by: Heiko Stuebner <heiko.stuebner@vrull.eu>
Link: https://lore.kernel.org/r/20230605110724.21391-17-andy.chiu@sifive.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
The vector register belongs to the signal context. They need to be stored
and restored as entering and leaving the signal handler. According to the
V-extension specification, the maximum length of the vector registers can
be 2^16. Hence, if userspace refers to the MINSIGSTKSZ to create a
sigframe, it may not be enough. To resolve this problem, this patch refers
to the commit 94b07c1f8c39c
("arm64: signal: Report signal frame size to userspace via auxv") to enable
userspace to know the minimum required sigframe size through the auxiliary
vector and use it to allocate enough memory for signal context.
Note that auxv always reports size of the sigframe as if V exists for
all starting processes, whenever the kernel has CONFIG_RISCV_ISA_V. The
reason is that users usually reference this value to allocate an
alternative signal stack, and the user may use V anytime. So the user
must reserve a space for V-context in sigframe in case that the signal
handler invokes after the kernel allocating V.
Signed-off-by: Greentime Hu <greentime.hu@sifive.com>
Signed-off-by: Vincent Chen <vincent.chen@sifive.com>
Signed-off-by: Andy Chiu <andy.chiu@sifive.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Björn Töpel <bjorn@rivosinc.com>
Reviewed-by: Guo Ren <guoren@kernel.org>
Reviewed-by: Heiko Stuebner <heiko.stuebner@vrull.eu>
Tested-by: Heiko Stuebner <heiko.stuebner@vrull.eu>
Link: https://lore.kernel.org/r/20230605110724.21391-16-andy.chiu@sifive.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
This patch facilitates the existing fp-reserved words for placement of
the first extension's context header on the user's sigframe. A context
header consists of a distinct magic word and the size, including the
header itself, of an extension on the stack. Then, the frame is followed
by the context of that extension, and then a header + context body for
another extension if exists. If there is no more extension to come, then
the frame must be ended with a null context header. A special case is
rv64gc, where the kernel support no extensions requiring to expose
additional regfile to the user. In such case the kernel would place the
null context header right after the first reserved word of
__riscv_q_ext_state when saving sigframe. And the kernel would check if
all reserved words are zeros when a signal handler returns.
__riscv_q_ext_state---->| |<-__riscv_extra_ext_header
~ ~
.reserved[0]--->|0 |<- .reserved
<-------|magic |<- .hdr
| |size |_______ end of sc_fpregs
| |ext-bdy|
| ~ ~
+)size ------->|magic |<- another context header
|size |
|ext-bdy|
~ ~
|magic:0|<- null context header
|size:0 |
The vector registers will be saved in datap pointer. The datap pointer
will be allocated dynamically when the task needs in kernel space. On
the other hand, datap pointer on the sigframe will be set right after
the __riscv_v_ext_state data structure.
Co-developed-by: Vincent Chen <vincent.chen@sifive.com>
Signed-off-by: Vincent Chen <vincent.chen@sifive.com>
Signed-off-by: Greentime Hu <greentime.hu@sifive.com>
Suggested-by: Vineet Gupta <vineetg@rivosinc.com>
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Co-developed-by: Andy Chiu <andy.chiu@sifive.com>
Signed-off-by: Andy Chiu <andy.chiu@sifive.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Acked-by: Heiko Stuebner <heiko.stuebner@vrull.eu>
Tested-by: Heiko Stuebner <heiko.stuebner@vrull.eu>
Link: https://lore.kernel.org/r/20230605110724.21391-15-andy.chiu@sifive.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
In order to let kernel/user locate and identify an extension context on
the existing sigframe, we are going to utilize reserved space of fp and
encode the information there. And since the sigcontext has already
preserved a space for fp context w or w/o CONFIG_FPU, we move those
reserved words checking/setting routine back into generic code.
This commit also undone an additional logical change carried by the
refactor commit 007f5c3589578
("Refactor FPU code in signal setup/return procedures"). Originally we
did not restore fp context if restoring of gpr have failed. And it was
fine on the other side. In such way the kernel could keep the regfiles
intact, and potentially react at the failing point of restore.
Signed-off-by: Andy Chiu <andy.chiu@sifive.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Acked-by: Heiko Stuebner <heiko.stuebner@vrull.eu>
Tested-by: Heiko Stuebner <heiko.stuebner@vrull.eu>
Link: https://lore.kernel.org/r/20230605110724.21391-14-andy.chiu@sifive.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
This patch adds ptrace support for riscv vector. The vector registers will
be saved in datap pointer of __riscv_v_ext_state. This pointer will be set
right after the __riscv_v_ext_state data structure then it will be put in
ubuf for ptrace system call to get or set. It will check if the datap got
from ubuf is set to the correct address or not when the ptrace system call
is trying to set the vector registers.
Co-developed-by: Vincent Chen <vincent.chen@sifive.com>
Signed-off-by: Vincent Chen <vincent.chen@sifive.com>
Signed-off-by: Greentime Hu <greentime.hu@sifive.com>
Signed-off-by: Andy Chiu <andy.chiu@sifive.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Palmer Dabbelt <palmer@rivosinc.com>
Link: https://lore.kernel.org/r/20230605110724.21391-13-andy.chiu@sifive.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Vector unit is disabled by default for all user processes. Thus, a
process will take a trap (illegal instruction) into kernel at the first
time when it uses Vector. Only after then, the kernel allocates V
context and starts take care of the context for that user process.
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Link: https://lore.kernel.org/r/3923eeee-e4dc-0911-40bf-84c34aee962d@linaro.org
Signed-off-by: Andy Chiu <andy.chiu@sifive.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20230605110724.21391-12-andy.chiu@sifive.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
This patch is used to detect the size of CPU vector registers and use
riscv_v_vsize to save the size of all the vector registers. It assumes all
harts has the same capabilities in a SMP system. If a core detects VLENB
that is different from the boot core, then it warns and turns off V
support for user space.
Co-developed-by: Guo Ren <guoren@linux.alibaba.com>
Signed-off-by: Guo Ren <guoren@linux.alibaba.com>
Co-developed-by: Vincent Chen <vincent.chen@sifive.com>
Signed-off-by: Vincent Chen <vincent.chen@sifive.com>
Signed-off-by: Greentime Hu <greentime.hu@sifive.com>
Signed-off-by: Andy Chiu <andy.chiu@sifive.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Heiko Stuebner <heiko.stuebner@vrull.eu>
Tested-by: Heiko Stuebner <heiko.stuebner@vrull.eu>
Reviewed-by: Palmer Dabbelt <palmer@rivosinc.com>
Link: https://lore.kernel.org/r/20230605110724.21391-9-andy.chiu@sifive.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Disable vector instructions execution for kernel mode at its entrances.
This helps find illegal uses of vector in the kernel space, which is
similar to the fpu.
Signed-off-by: Guo Ren <guoren@linux.alibaba.com>
Co-developed-by: Vincent Chen <vincent.chen@sifive.com>
Signed-off-by: Vincent Chen <vincent.chen@sifive.com>
Co-developed-by: Han-Kuan Chen <hankuan.chen@sifive.com>
Signed-off-by: Han-Kuan Chen <hankuan.chen@sifive.com>
Co-developed-by: Greentime Hu <greentime.hu@sifive.com>
Signed-off-by: Greentime Hu <greentime.hu@sifive.com>
Signed-off-by: Vineet Gupta <vineetg@rivosinc.com>
Signed-off-by: Andy Chiu <andy.chiu@sifive.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Heiko Stuebner <heiko.stuebner@vrull.eu>
Tested-by: Heiko Stuebner <heiko.stuebner@vrull.eu>
Reviewed-by: Palmer Dabbelt <palmer@rivosinc.com>
Link: https://lore.kernel.org/r/20230605110724.21391-7-andy.chiu@sifive.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Probing kernel support for Vector extension is available now. This only
add detection for V only. Extenions like Zvfh, Zk are not in this scope.
Signed-off-by: Andy Chiu <andy.chiu@sifive.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Evan Green <evan@rivosinc.com>
Reviewed-by: Palmer Dabbelt <palmer@rivosinc.com>
Link: https://lore.kernel.org/r/20230605110724.21391-4-andy.chiu@sifive.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Yangyu Chen <cyy@cyyself.name> says:
This patchset allows case-insensitive ISA string parsing, which is
needed in the ACPI environment. As the RISC-V Hart Capabilities Table
(RHCT) description in UEFI Forum ECR[1] shows the format of the ISA
string is defined in the RISC-V unprivileged specification[2]. However,
the RISC-V unprivileged specification defines the ISA naming strings are
case-insensitive while the current ISA string parser in the kernel only
accepts lowercase letters. In this case, the kernel should allow
case-insensitive ISA string parsing. Moreover, this reason has been
discussed in Conor's patch[3]. And I have also checked the current ISA
string parsing in the recent ACPI support patch[4] will also call
`riscv_fill_hwcap` function as DT we use now.
The original motivation for my patch v1[5] is that some SoC generators
will provide generated DT with illegal ISA string in dt-binding such as
rocket-chip, which will even cause kernel panic in some cases as I
mentioned in v1[5]. Now, the rocket-chip has been fixed in PR #3333[6].
However, when using some specific version of rocket-chip with
illegal ISA string in DT, this patchset will also work for parsing
uppercase letters correctly in DT, thus will have better compatibility.
In summary, this patch not only works for case-insensitive ISA string
parsing to meet the requirements in ECR[1] but also can be a workaround
for some specific versions of rocket-chip.
* b4-shazam-merge:
dt-bindings: riscv: drop invalid comment about riscv,isa lower-case reasoning
riscv: allow case-insensitive ISA string parsing
Link: https://lore.kernel.org/r/tencent_E6911C8D71F5624E432A1AFDF86804C3B509@qq.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
According to RISC-V Hart Capabilities Table (RHCT) description in UEFI
Forum ECR, the format of the ISA string is defined in the RISC-V
unprivileged specification which is case-insensitive. However, the
current ISA string parser in the kernel does not support ISA strings
with uppercase letters.
This patch modifies the ISA string parser in the kernel to support
case-insensitive ISA string parsing.
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Yangyu Chen <cyy@cyyself.name>
Link: https://lore.kernel.org/r/tencent_B30EED51C7235CA1988890E5C658BE35C107@qq.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
* A build warning fix for BUILTIN_DTB=y.
* Hibernation support is hidden behind NONPORTABLE, as it depends on
some undocumented early boot behavior and breaks on most platforms.
* A fix for relocatable kernels on systems with early boot errata.
* A fix to properly handle perf callchains for kernel tracepoints.
* A pair of fixes for NAPOT to avoid inconsistencies between PTEs and
handle hardware that sets arbitrary A/D bits.
-----BEGIN PGP SIGNATURE-----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=G1H6
-----END PGP SIGNATURE-----
Merge tag 'riscv-for-linus-6.4-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V fixes from Palmer Dabbelt:
- A build warning fix for BUILTIN_DTB=y
- Hibernation support is hidden behind NONPORTABLE, as it depends on
some undocumented early boot behavior and breaks on most platforms
- A fix for relocatable kernels on systems with early boot errata
- A fix to properly handle perf callchains for kernel tracepoints
- A pair of fixes for NAPOT to avoid inconsistencies between PTEs and
handle hardware that sets arbitrary A/D bits
* tag 'riscv-for-linus-6.4-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
riscv: Implement missing huge_ptep_get
riscv: Fix huge_ptep_set_wrprotect when PTE is a NAPOT
riscv: perf: Fix callchain parse error with kernel tracepoint events
riscv: Fix relocatable kernels with early alternatives using -fno-pie
RISC-V: mark hibernation as nonportable
riscv: Fix unused variable warning when BUILTIN_DTB is set
On ACPI based platforms, timer related information is
available in RHCT. Add ACPI based probe support to the
timer initialization.
Signed-off-by: Sunil V L <sunilvl@ventanamicro.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20230515054928.2079268-20-sunilvl@ventanamicro.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
On ACPI based platforms, few details like ISA need to be read
from the ACPI table. Enable cpuinfo on ACPI based systems.
ACPI has nothing similar to DT compatible property for each CPU.
Hence, cpuinfo will not print "uarch".
Signed-off-by: Sunil V L <sunilvl@ventanamicro.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20230515054928.2079268-16-sunilvl@ventanamicro.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
On ACPI based systems, the information about the hart
like ISA is provided by the RISC-V Hart Capabilities Table (RHCT).
Enable filling up hwcap structure based on the information in RHCT.
Signed-off-by: Sunil V L <sunilvl@ventanamicro.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20230515054928.2079268-15-sunilvl@ventanamicro.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
During boot we call riscv_of_processor_hartid() for each hart that we
add to the possible cpus list. Repeating the call again here is not
required, if we iterate over the list of possible CPUs, rather than the
list of all CPUs.
The call to of_property_read_string() for "riscv,isa" cannot fail
either, as it has previously succeeded in riscv_of_processor_hartid(),
but leaving in the error checking makes the operation of the loop more
obvious & provides leeway for future refactoring of
riscv_of_processor_hartid().
Signed-off-by: Sunil V L <sunilvl@ventanamicro.com>
Co-developed-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Link: https://lore.kernel.org/r/20230515054928.2079268-14-sunilvl@ventanamicro.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Enable SMP boot on ACPI based platforms by using the RINTC
structures in the MADT table.
Signed-off-by: Sunil V L <sunilvl@ventanamicro.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Link: https://lore.kernel.org/r/20230515054928.2079268-13-sunilvl@ventanamicro.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
setup_smp() currently assumes DT-based platforms. To enable ACPI,
first make this a wrapper function and move existing code to
a separate DT-specific function.
Signed-off-by: Sunil V L <sunilvl@ventanamicro.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Palmer Dabbelt <palmer@rivosinc.com>
Link: https://lore.kernel.org/r/20230515054928.2079268-12-sunilvl@ventanamicro.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
RINTC structures in the MADT provide mapping between the hartid
and the CPU. This is required many times even at run time like
cpuinfo. So, instead of parsing the ACPI table every time, cache
the RINTC structures and provide a function to get the correct
RINTC structure for a given cpu.
Signed-off-by: Sunil V L <sunilvl@ventanamicro.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Link: https://lore.kernel.org/r/20230515054928.2079268-10-sunilvl@ventanamicro.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Initialize the ACPI core for RISC-V during boot.
ACPI tables and interpreter are initialized based on
the information passed from the firmware and the value of
the kernel parameter 'acpi'.
With ACPI support added for RISC-V, the kernel parameter 'acpi'
is also supported on RISC-V. Hence, update the documentation.
Signed-off-by: Sunil V L <sunilvl@ventanamicro.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20230515054928.2079268-9-sunilvl@ventanamicro.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Enable ACPI core for RISC-V after adding architecture-specific
interfaces and header files required to build the ACPI core.
1) Couple of header files are required unconditionally by the ACPI
core. Add empty acenv.h and cpu.h header files.
2) If CONFIG_PCI is enabled, a few PCI related interfaces need to
be provided by the architecture. Define dummy interfaces for now
so that build succeeds. Actual implementation will be added when
PCI support is added for ACPI along with external interrupt
controller support.
3) A few globals and memory mapping related functions specific
to the architecture need to be provided.
Signed-off-by: Sunil V L <sunilvl@ventanamicro.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Palmer Dabbelt <palmer@rivosinc.com>
Link: https://lore.kernel.org/r/20230515054928.2079268-7-sunilvl@ventanamicro.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Early alternatives are called with the mmu disabled, and then should not
access any global symbols through the GOT since it requires relocations,
relocations that we do before but *virtually*. So only use medany code
model for this early code.
Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Tested-by: Conor Dooley <conor.dooley@microchip.com> # booted on nezha & unmatched
Fixes: 39b33072941f ("riscv: Introduce CONFIG_RELOCATABLE")
Link: https://lore.kernel.org/r/20230526154630.289374-1-alexghiti@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
- Initialize 'ret' local variables on fprobe_handler() to fix the smatch
warning. With this, fprobe function exit handler is not working
randomly.
- Fix to use preempt_enable/disable_notrace for rethook handler to
prevent recursive call of fprobe exit handler (which is based on
rethook)
- Fix recursive call issue on fprobe_kprobe_handler().
- Fix to detect recursive call on fprobe_exit_handler().
- Fix to make all arch-dependent rethook code notrace.
(the arch-independent code is already notrace)
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEh7BulGwFlgAOi5DV2/sHvwUrPxsFAmRmKgQACgkQ2/sHvwUr
PxvlCgf+OJk5O9IJlTgqDV6JNPsTzFS7qqyAyQmZW9Bj8STfWAIRxa0zeGbZE58K
5LwgzAj+SqzYRwIvzzZ3xsA5j7f1Wj7wG0TQgmpnIW+hprwDrLsUhoZ5s1D/Ojel
A4rAnqCrgnh5m5SenU2QCUngGKn004j4RASaZvRELDyvyIkBSqNhswCH8ZWGPror
KuCu5AmEnFagYl0lmNL3H2aCITAg3QEK+fE6iR+lYsqfR3xbs4YAcqiylHBdY0wX
ssK7LVdRmv7O6TxSj4P2ohDvLJP3eL9bVirsJpg0OVbqWJCs65T2rJJjXiKojYXf
vSVWFJFK5oV98ZHfXTG9R7x0DEwc+g==
=jO68
-----END PGP SIGNATURE-----
Merge tag 'probes-fixes-v6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull probes fixes from Masami Hiramatsu:
- Initialize 'ret' local variables on fprobe_handler() to fix the
smatch warning. With this, fprobe function exit handler is not
working randomly.
- Fix to use preempt_enable/disable_notrace for rethook handler to
prevent recursive call of fprobe exit handler (which is based on
rethook)
- Fix recursive call issue on fprobe_kprobe_handler()
- Fix to detect recursive call on fprobe_exit_handler()
- Fix to make all arch-dependent rethook code notrace (the
arch-independent code is already notrace)"
* tag 'probes-fixes-v6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
rethook, fprobe: do not trace rethook related functions
fprobe: add recursion detection in fprobe_exit_handler
fprobe: make fprobe_kprobe_handler recursion free
rethook: use preempt_{disable, enable}_notrace in rethook_trampoline_handler
tracing: fprobe: Initialize ret valiable to fix smatch error
These functions are already marked as NOKPROBE to prevent recursion and
we have the same reason to blacklist them if rethook is used with fprobe,
since they are beyond the recursion-free region ftrace can guard.
Link: https://lore.kernel.org/all/20230517034510.15639-5-zegao@tencent.com/
Fixes: f3a112c0c40d ("x86,rethook,kprobes: Replace kretprobe with rethook on x86")
Signed-off-by: Ze Gao <zegao@tencent.com>
Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Cc: stable@vger.kernel.org
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
kernel/pi gives rise to a lot of new sections that end up orphans: the
first attempt to fix that tried to enumerate them all in the linker
script, but kernel test robot with a random config keeps finding more of
them.
So prefix all those sections with .init.pi instead of only .init in
order to be able to easily catch them all in the linker script.
Reported-by: kernel test robot <lkp@intel.com>
Link: https://lore.kernel.org/oe-kbuild-all/202304301606.Cgp113Ha-lkp@intel.com/
Fixes: 26e7aacb83df ("riscv: Allow to downgrade paging mode from the command line")
Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Link: https://lore.kernel.org/r/20230504120759.18730-1-alexghiti@rivosinc.com
Cc: stable@vger.kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
* Support for hibernation.
* .rela.dyn has been moved to init.
* A fix for the SBI probing to allow for implementation-defined
behavior.
* Various other fixes and cleanups throughout the tree.
-----BEGIN PGP SIGNATURE-----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=xoqj
-----END PGP SIGNATURE-----
Merge tag 'riscv-for-linus-6.4-mw2' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull more RISC-V updates from Palmer Dabbelt:
- Support for hibernation
- The .rela.dyn section has been moved to the init area
- A fix for the SBI probing to allow for implementation-defined
behavior
- Various other fixes and cleanups throughout the tree
* tag 'riscv-for-linus-6.4-mw2' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
RISC-V: include cpufeature.h in cpufeature.c
riscv: Move .rela.dyn to the init sections
dt-bindings: riscv: explicitly mention assumption of Zicsr & Zifencei support
riscv: compat_syscall_table: Fixup compile warning
RISC-V: fixup in-flight collision with ARCH_WANT_OPTIMIZE_VMEMMAP rename
RISC-V: fix sifive and thead section mismatches in errata
RISC-V: Align SBI probe implementation with spec
riscv: mm: remove redundant parameter of create_fdt_early_page_table
riscv: Adjust dependencies of HAVE_DYNAMIC_FTRACE selection
RISC-V: Add arch functions to support hibernation/suspend-to-disk
RISC-V: mm: Enable huge page support to kernel_page_present() function
RISC-V: Factor out common code of __cpu_resume_enter()
RISC-V: Change suspend_save_csrs and suspend_restore_csrs to public function
Automation complains:
warning: symbol '__pcpu_scope_misaligned_access_speed' was not declared. Should it be static?
cpufeature.c doesn't actually include the header of the same name, as it
had not previously used anything from it.
The per-cpu variable is declared there, so include it to silence the
complaints.
Fixes: 62a31d6e38bd ("RISC-V: hwprobe: Support probing of misaligned access performance")
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Evan Green <evan@rivosinc.com>
Link: https://lore.kernel.org/r/20230420-wound-gizzard-2b2b589d9bea@spud
Cc: stable@vger.kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
The recent introduction of relocatable kernels prepared the move of
.rela.dyn to the init section, but actually forgot to do so, so do it
here.
Before this patch: "Freeing unused kernel image (initmem) memory: 2592K"
After this patch: "Freeing unused kernel image (initmem) memory: 6288K"
The difference corresponds to the size of the .rela.dyn section:
"[42] .rela.dyn RELA ffffffff8197e798 0127f798
000000000039c660 0000000000000018 A 47 0 8"
Fixes: 559d1e45a16d ("riscv: Use --emit-relocs in order to move .rela.dyn in init")
Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Link: https://lore.kernel.org/r/20230428120932.22735-1-alexghiti@rivosinc.com
Cc: stable@vger.kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
sbi_probe_extension() is specified with "Returns 0 if the given SBI
extension ID (EID) is not available, or 1 if it is available unless
defined as any other non-zero value by the implementation."
Additionally, sbiret.value is a long. Fix the implementation to
ensure any nonzero long value is considered a success, rather
than only positive int values.
Fixes: b9dcd9e41587 ("RISC-V: Add basic support for SBI v0.2")
Signed-off-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20230427163626.101042-1-ajones@ventanamicro.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Sia Jee Heng <jeeheng.sia@starfivetech.com> says:
This series adds RISC-V Hibernation/suspend to disk support.
Low level Arch functions were created to support hibernation.
swsusp_arch_suspend() relies code from __cpu_suspend_enter() to write
cpu state onto the stack, then calling swsusp_save() to save the memory
image.
Arch specific hibernation header is implemented and is utilized by the
arch_hibernation_header_restore() and arch_hibernation_header_save()
functions. The arch specific hibernation header consists of satp, hartid,
and the cpu_resume address. The kernel built version is also need to be
saved into the hibernation image header to making sure only the same
kernel is restore when resume.
swsusp_arch_resume() creates a temporary page table that covering only
the linear map. It copies the restore code to a 'safe' page, then start to
restore the memory image. Once completed, it restores the original
kernel's page table. It then calls into __hibernate_cpu_resume()
to restore the CPU context. Finally, it follows the normal hibernation
path back to the hibernation core.
To enable hibernation/suspend to disk into RISCV, the below config
need to be enabled:
- CONFIG_HIBERNATION
- CONFIG_ARCH_HIBERNATION_HEADER
- CONFIG_ARCH_HIBERNATION_POSSIBLE
At high-level, this series includes the following changes:
1) Change suspend_save_csrs() and suspend_restore_csrs()
to public function as these functions are common to
suspend/hibernation. (patch 1)
2) Refactor the common code in the __cpu_resume_enter() function and
__hibernate_cpu_resume() function. The common code are used by
hibernation and suspend. (patch 2)
3) Enhance kernel_page_present() function to support huge page. (patch 3)
4) Add arch/riscv low level functions to support
hibernation/suspend to disk. (patch 4)
* b4-shazam-merge:
RISC-V: Add arch functions to support hibernation/suspend-to-disk
RISC-V: mm: Enable huge page support to kernel_page_present() function
RISC-V: Factor out common code of __cpu_resume_enter()
RISC-V: Change suspend_save_csrs and suspend_restore_csrs to public function
Link: https://lore.kernel.org/r/20230330064321.1008373-1-jeeheng.sia@starfivetech.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Low level Arch functions were created to support hibernation.
swsusp_arch_suspend() relies code from __cpu_suspend_enter() to write
cpu state onto the stack, then calling swsusp_save() to save the memory
image.
Arch specific hibernation header is implemented and is utilized by the
arch_hibernation_header_restore() and arch_hibernation_header_save()
functions. The arch specific hibernation header consists of satp, hartid,
and the cpu_resume address. The kernel built version is also need to be
saved into the hibernation image header to making sure only the same
kernel is restore when resume.
swsusp_arch_resume() creates a temporary page table that covering only
the linear map. It copies the restore code to a 'safe' page, then start
to restore the memory image. Once completed, it restores the original
kernel's page table. It then calls into __hibernate_cpu_resume()
to restore the CPU context. Finally, it follows the normal hibernation
path back to the hibernation core.
To enable hibernation/suspend to disk into RISCV, the below config
need to be enabled:
- CONFIG_HIBERNATION
- CONFIG_ARCH_HIBERNATION_HEADER
- CONFIG_ARCH_HIBERNATION_POSSIBLE
Signed-off-by: Sia Jee Heng <jeeheng.sia@starfivetech.com>
Reviewed-by: Ley Foon Tan <leyfoon.tan@starfivetech.com>
Reviewed-by: Mason Huo <mason.huo@starfivetech.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Link: https://lore.kernel.org/r/20230330064321.1008373-5-jeeheng.sia@starfivetech.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
The cpu_resume() function is very similar for the suspend to disk and
suspend to ram cases. Factor out the common code into suspend_restore_csrs
macro and suspend_restore_regs macro.
Signed-off-by: Sia Jee Heng <jeeheng.sia@starfivetech.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20230330064321.1008373-3-jeeheng.sia@starfivetech.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Currently suspend_save_csrs() and suspend_restore_csrs() functions are
statically defined in the suspend.c. Change the function's attribute
to public so that the functions can be used by hibernation as well.
Signed-off-by: Sia Jee Heng <jeeheng.sia@starfivetech.com>
Reviewed-by: Ley Foon Tan <leyfoon.tan@starfivetech.com>
Reviewed-by: Mason Huo <mason.huo@starfivetech.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Link: https://lore.kernel.org/r/20230330064321.1008373-2-jeeheng.sia@starfivetech.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
* Support for runtime detection of the Svnapot extension.
* Support for Zicboz when clearing pages.
* We've moved to GENERIC_ENTRY.
* Support for !MMU on rv32 systems.
* The linear region is now mapped via huge pages.
* Support for building relocatable kernels.
* Support for the hwprobe interface.
* Various fixes and cleanups throughout the tree.
-----BEGIN PGP SIGNATURE-----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=oxQd
-----END PGP SIGNATURE-----
Merge tag 'riscv-for-linus-6.4-mw1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V updates from Palmer Dabbelt:
- Support for runtime detection of the Svnapot extension
- Support for Zicboz when clearing pages
- We've moved to GENERIC_ENTRY
- Support for !MMU on rv32 systems
- The linear region is now mapped via huge pages
- Support for building relocatable kernels
- Support for the hwprobe interface
- Various fixes and cleanups throughout the tree
* tag 'riscv-for-linus-6.4-mw1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (57 commits)
RISC-V: hwprobe: Explicity check for -1 in vdso init
RISC-V: hwprobe: There can only be one first
riscv: Allow to downgrade paging mode from the command line
dt-bindings: riscv: add sv57 mmu-type
RISC-V: hwprobe: Remove __init on probe_vendor_features()
riscv: Use --emit-relocs in order to move .rela.dyn in init
riscv: Check relocations at compile time
powerpc: Move script to check relocations at compile time in scripts/
riscv: Introduce CONFIG_RELOCATABLE
riscv: Move .rela.dyn outside of init to avoid empty relocations
riscv: Prepare EFI header for relocatable kernels
riscv: Unconditionnally select KASAN_VMALLOC if KASAN
riscv: Fix ptdump when KASAN is enabled
riscv: Fix EFI stub usage of KASAN instrumented strcmp function
riscv: Move DTB_EARLY_BASE_VA to the kernel address space
riscv: Rework kasan population functions
riscv: Split early and final KASAN population functions
riscv: Use PUD/P4D/PGD pages for the linear mapping
riscv: Move the linear mapping creation in its own function
riscv: Get rid of riscv_pfn_base variable
...
- Remove diagnostics and adjust config for CSD lock diagnostics
- Add a generic IPI-sending tracepoint, as currently there's no easy
way to instrument IPI origins: it's arch dependent and for some
major architectures it's not even consistently available.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=Wp7f
-----END PGP SIGNATURE-----
Merge tag 'smp-core-2023-04-27' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull SMP cross-CPU function-call updates from Ingo Molnar:
- Remove diagnostics and adjust config for CSD lock diagnostics
- Add a generic IPI-sending tracepoint, as currently there's no easy
way to instrument IPI origins: it's arch dependent and for some major
architectures it's not even consistently available.
* tag 'smp-core-2023-04-27' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
trace,smp: Trace all smp_function_call*() invocations
trace: Add trace_ipi_send_cpu()
sched, smp: Trace smp callback causing an IPI
smp: reword smp call IPI comment
treewide: Trace IPIs sent via smp_send_reschedule()
irq_work: Trace self-IPIs sent via arch_irq_work_raise()
smp: Trace IPIs sent via arch_send_call_function_ipi_mask()
sched, smp: Trace IPIs sent via send_call_function_single_ipi()
trace: Add trace_ipi_send_cpumask()
kernel/smp: Make csdlock_debug= resettable
locking/csd_lock: Remove per-CPU data indirection from CSD lock debugging
locking/csd_lock: Remove added data from CSD lock debugging
locking/csd_lock: Add Kconfig option for csd_debug default
- Mark arch_cpu_idle_dead() __noreturn, make all architectures & drivers that did
this inconsistently follow this new, common convention, and fix all the fallout
that objtool can now detect statically.
- Fix/improve the ORC unwinder becoming unreliable due to UNWIND_HINT_EMPTY ambiguity,
split it into UNWIND_HINT_END_OF_STACK and UNWIND_HINT_UNDEFINED to resolve it.
- Fix noinstr violations in the KCSAN code and the lkdtm/stackleak code.
- Generate ORC data for __pfx code
- Add more __noreturn annotations to various kernel startup/shutdown/panic functions.
- Misc improvements & fixes.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=NwEV
-----END PGP SIGNATURE-----
Merge tag 'objtool-core-2023-04-27' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull objtool updates from Ingo Molnar:
- Mark arch_cpu_idle_dead() __noreturn, make all architectures &
drivers that did this inconsistently follow this new, common
convention, and fix all the fallout that objtool can now detect
statically
- Fix/improve the ORC unwinder becoming unreliable due to
UNWIND_HINT_EMPTY ambiguity, split it into UNWIND_HINT_END_OF_STACK
and UNWIND_HINT_UNDEFINED to resolve it
- Fix noinstr violations in the KCSAN code and the lkdtm/stackleak code
- Generate ORC data for __pfx code
- Add more __noreturn annotations to various kernel startup/shutdown
and panic functions
- Misc improvements & fixes
* tag 'objtool-core-2023-04-27' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (52 commits)
x86/hyperv: Mark hv_ghcb_terminate() as noreturn
scsi: message: fusion: Mark mpt_halt_firmware() __noreturn
x86/cpu: Mark {hlt,resume}_play_dead() __noreturn
btrfs: Mark btrfs_assertfail() __noreturn
objtool: Include weak functions in global_noreturns check
cpu: Mark nmi_panic_self_stop() __noreturn
cpu: Mark panic_smp_self_stop() __noreturn
arm64/cpu: Mark cpu_park_loop() and friends __noreturn
x86/head: Mark *_start_kernel() __noreturn
init: Mark start_kernel() __noreturn
init: Mark [arch_call_]rest_init() __noreturn
objtool: Generate ORC data for __pfx code
x86/linkage: Fix padding for typed functions
objtool: Separate prefix code from stack validation code
objtool: Remove superfluous dead_end_function() check
objtool: Add symbol iteration helpers
objtool: Add WARN_INSN()
scripts/objdump-func: Support multiple functions
context_tracking: Fix KCSAN noinstr violation
objtool: Add stackleak instrumentation to uaccess safe list
...
- First part of DT header detangling dropping cpu.h from of_device.h
and replacing some includes with forward declarations. A handful of
drivers needed some adjustment to their includes as a result.
- Refactor of_device.h to be used by bus drivers rather than various
device drivers. This moves non-bus related functions out of
of_device.h. The end goal is for of_platform.h and of_device.h to stop
including each other.
- Refactor open coded parsing of "ranges" in some bus drivers to use DT
address parsing functions
- Add some new address parsing functions of_property_read_reg(),
of_range_count(), and of_range_to_resource() in preparation to convert
more open coded parsing of DT addresses to use them.
- Treewide clean-ups to use of_property_read_bool() and
of_property_present() as appropriate. The ones here are the ones
that didn't get picked up elsewhere.
-----BEGIN PGP SIGNATURE-----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=89Zj
-----END PGP SIGNATURE-----
Merge tag 'devicetree-for-6.4-2' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull more devicetree updates from Rob Herring:
- First part of DT header detangling dropping cpu.h from of_device.h
and replacing some includes with forward declarations. A handful of
drivers needed some adjustment to their includes as a result.
- Refactor of_device.h to be used by bus drivers rather than various
device drivers. This moves non-bus related functions out of
of_device.h. The end goal is for of_platform.h and of_device.h to
stop including each other.
- Refactor open coded parsing of "ranges" in some bus drivers to use DT
address parsing functions
- Add some new address parsing functions of_property_read_reg(),
of_range_count(), and of_range_to_resource() in preparation to
convert more open coded parsing of DT addresses to use them.
- Treewide clean-ups to use of_property_read_bool() and
of_property_present() as appropriate. The ones here are the ones that
didn't get picked up elsewhere.
* tag 'devicetree-for-6.4-2' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (34 commits)
bus: tegra-gmi: Replace of_platform.h with explicit includes
hte: Use of_property_present() for testing DT property presence
w1: w1-gpio: Use of_property_read_bool() for boolean properties
virt: fsl: Use of_property_present() for testing DT property presence
soc: fsl: Use of_property_present() for testing DT property presence
sbus: display7seg: Use of_property_read_bool() for boolean properties
sparc: Use of_property_read_bool() for boolean properties
sparc: Use of_property_present() for testing DT property presence
bus: mvebu-mbus: Remove open coded "ranges" parsing
of/address: Add of_property_read_reg() helper
of/address: Add of_range_count() helper
of/address: Add support for 3 address cell bus
of/address: Add of_range_to_resource() helper
of: unittest: Add bus address range parsing tests
of: Drop cpu.h include from of_device.h
OPP: Adjust includes to remove of_device.h
irqchip: loongson-eiointc: Add explicit include for cpuhotplug.h
cpuidle: Adjust includes to remove of_device.h
cpufreq: sun50i: Add explicit include for cpu.h
cpufreq: Adjust includes to remove of_device.h
...
id_bitsmash is unsigned. We need to explicitly check for -1, rather
than use > 0.
Fixes: aa5af0aa90ba ("RISC-V: Add hwprobe vDSO function and data")
Signed-off-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Evan Green <evan@rivosinc.com>
Link: https://lore.kernel.org/r/20230426141333.10063-3-ajones@ventanamicro.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
