IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
The array is hardcoded to 8 in atomfirmware.h, but firmware provides
a bigger one sometimes. Deferencing the larger array causes an out
of bounds error.
commit 4fc1ba4aa589 ("drm/amd/display: fix array index out of bound error
in bios parser") fixed some of this, but there are two other cases
not covered by it. Fix those as well.
Reported-by: erhard_f@mailbox.org
Link: https://bugzilla.kernel.org/show_bug.cgi?id=214853
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2473
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
New sequence for transparent mode DP1.x link training was provided by LTTPR
vendor
[HOW]
Implement new FIXED_VS sequence, increase LT retry count to minimize
any potential intermittent lightup failures
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Michael Strauss <michael.strauss@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
based on dscclk instance offset check conditiona program dscclk
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Charlene Liu <Charlene.Liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Description]
- On init if a display is connected, we need to maintain the DISPCLK
frequency
- Even though DPG_EN=1, the display still requires the correct
timing or it could cause audio corruption (if DISPCLK freq
is reduced)
- Read the current DISPCLK freq and request the same value to ensure
the timing is valid and unchanged
- However, add option to do a full pipe power down (including link)
which will also avoid audio related issues
- Disabled for the time being on dcn32
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Description]
- When determining FPO support, include FPO + VActive support
- Support FPO + VActive if one display meets regular requirements
for FPO and the second display is able to switch in VACTIVE with
a given amount of margin
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
In 2560x1600@240p eDP panel, driver use lowest voltage level
to play 1080p video cause underflow. According to HW SPEC,
the senario should use high voltage level.
[How]
ChromaPre value is zero when bandwidth validation.
Correct ChromaPre calculation.
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Paul Hsieh <Paul.Hsieh@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
To enable root clock optimizations, we need a number of
register writes and need to account for the difference
in DPSTREAMCLK between DCN31 and DCN314. To prevent
issues, add a number of register writes to
DCCG_MASK_SH_LIST_DCN314_COMMON(), and define dccg314_init()
which is mostly in alignment with dccg31_init() but
accounts for the new DPSTREAMCLK sequence.
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
It will introduce the extra warnning log on some asic
that doesn't register
[HOW]
Add the register on dcn32
Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Zhikai Zhai <zhikai.zhai@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Description]
- If we find that applying FAMS doesn't reduce the voltage level,
we will not use it
- Ensure to clear the stream flags indicating FAMS if we hit this
case
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Compiling AMD GPU drivers displays a warning:
drivers/gpu/drm/amd/amdgpu/../display/dc/dcn30/dcn30_optc.c:294:6: warning: no previous prototype for ‘optc3_wait_drr_doublebuffer_pending_clear’ [-Wmissing-prototypes]
Get rid of it by marking the function as static
Signed-off-by: Caio Novais <caionovais@usp.br>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Compiling AMD GPU drivers displays a warning:
drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dcn314/display_rq_dlg_calc_314.c: In function ‘dml_rq_dlg_get_dlg_params’:
drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dcn314/display_rq_dlg_calc_314.c:991:14: warning: variable ‘scl_enable’ set but not used [-Wunused-but-set-variable]
Get rid of it by removing the variable 'scl_enable'.
Signed-off-by: Caio Novais <caionovais@usp.br>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This DC version brings along:
- Enable FPO optimization
- Support for 6.75 GBps link rate
- Fixes to underflow, black screen and more
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Description]
Assign the correct info now that FW headers are promoted
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Some dock and mst monitor don't like to receive CLEAR_PAYLOAD_ID_TABLE
when mst_en is set to 0. It doesn't make sense to do so in source
side, either.
[How]
Don't send CLEAR_PAYLOAD_ID_TABLE if mst_en is 0
Reviewed-by: George Shen <George.Shen@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Peichen Huang <PeiChen.Huang@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Description]
Enable optimization for preferring FPO if it achieves
a lower voltage level
Reviewed-by: George Shen <George.Shen@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Description]
If transitioning from an FPO config -> FPO config, we want
to keep cursor P-State force disallowed. Any other transition
from FPO config -> non FPO config should unforce the cursor
P-State disallow
Reviewed-by: Wesley Chalmers <Wesley.Chalmers@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
The 6.75 GBps link rate is part of the new eDP specification
version 1.5 is going to be supported in the future.
Since this standard is very new and there are no existing 6.75 GBps
panels on the market yet, we should put a condition in the driver
on enabling this feature until we can validate it with real hardware.
[How]
- Add boolean flag support_eDP1_5 in struct dc_debug_options.
- Enable the 6.75 link rate in reduce_link_rate(...) only when
the flag is true.
Reviewed-by: Charlene Liu <Charlene.Liu@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Artem Grishin <Artem.Grishin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
The latest eDP spec version 1.5 defines a new generic link
rate of 6.75 Gbps/Lane, which needs to be supported in the driver.
[How]
Added new element to the dc_link_rate enum
Reviewed-by: Charlene Liu <Charlene.Liu@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Artem Grishin <Artem.Grishin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Observing underflow on dcn30+ system config at 4k144hz
[How]
We set the UCLK hardmax on AC/DC switch if softmax is enabled
and also on boot. While booting up the UCLK Hardmax is set
to softmax before the init sequence and the init sequence
resets the hardmax to UCLK max which enables P-state switching.
Just added a conditional check to avoid setting hardmax on init.
Reviewed-by: Alvin Lee <Alvin.Lee2@amd.com>
Reviewed-by: Martin Leung <Martin.Leung@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Ayush Gupta <ayugupta@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Description]
* Pass in pipe index for FPO cmd to DMCUB
- This change will pass in the pipe index for each stream
that is using FPO
- This change is in preparation to enable FPO + VActive
* Use per pipe P-State force for FPO
- For FPO, instead of using max watermarks value for P-State disallow,
use per pipe p-state force instead
- This is in preparation to enable FPO + VActive
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
As part of the FAMS work, we need code infrastructure in DC.
dcn30_fpu.c changes went missing during previous upstream
activity.
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
Needed to get certain EDID to light up during TMDS compliance.
Reviewed-by: Charlene Liu <Charlene.Liu@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Taimur Hassan <Syed.Hassan@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
HW delta follow up
Reviewed-by: Chris Park <Chris.Park@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Reviewed-by: Jerry Zuo <Jerry.Zuo@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Charlene Liu <Charlene.Liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
when trying to fix a nullptr dereference on VMs,
accidentally doubly allocated memory for the non VM
case. removed the extra link_srv creation since
dc_construct_ctx is called in both VM and non VM cases
Also added a proper fail check for if kzalloc fails
Cc: stable@vger.kernel.org
Cc: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Leo Ma <Hanghong.Ma@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Martin Leung <Martin.Leung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
DPP Root clock optimization when combined with 4to1 MPC combine results
in the screen turning black.
This is because the DPPCLK is stopped during the middle of an
optimize_bandwidth sequence during commit_minimal_transition without
going through plane power down/power up.
[How]
The intent of a 0Hz DPP clock through update_clocks is to disable the
DTO. This differs from the behavior of stopping the DPPCLK entirely
(utilizing a 0Hz clock on some ASIC) so it's better to move this logic
to reside next to plane power up/power down where we gate the HUBP/DPP
DOMAIN.
The new sequence should be:
Power down: PG enabled -> RCO on
Power up: RCO off -> PG disabled
Rename power_on_plane to power_on_plane_resources to reflect the
actual operation that's occurring.
Cc: stable@vger.kernel.org
Cc: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Descrtipion]
- Driver hardcoded FCLK P-State latency was incorrect
- Use the value provided by PMFW header instead
Reviewed-by: Nevenko Stupar <Nevenko.Stupar@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Description]
- On high refresh rate DRR displays that support VBLANK naturally,
UCLK could be idling at DPM1 instead of DPM0 since it doesn't use
FPO
- To achieve DPM0, enable FPO on these configs even though it can
support P-State without FPO
- Default disable for now, have debug option to enable
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
While scanning the top_pipe connections we can run into a case where
the bottom pipe is still connected to a top_pipe but with a NULL
plane_state.
[How]
Treat a NULL plane_state the same as the plane being invisible for
pipe cursor disable logic.
Cc: stable@vger.kernel.org
Cc: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Charlene Liu <Charlene.Liu@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmQgu8QeHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiG2fAH/0+pSM+u9ZiTCRcc
9cxpHqRu4J16oDJVroxD5c95C8t6pqq8emla7OcPjEbt+2jijEmTVda6i4IpAscc
e8c3t4zonzIjxWQxukZ2iPb7rUAsDYjom9Y5NpHB5J4eJMEvrgiDo7MIBtvwECYp
SejOpecquUcpFF1JTsDqqUUKgt56A/F/9jNyC/3p31doHbUfQWwTAiEA60gXwjiV
DtFFwUlKivLgkTOgigL0MUCrKLpwKXfpBOAbbp5h+zkV/6yjBmkx/OViovsJfrwX
kauOPOA/bSLXby4YyHkIB3nUY7mu7KDJfkpy2KMvZkRnJkYYW1Gt3urf714KVo5G
dnjfrA8=
=q5sO
-----END PGP SIGNATURE-----
Merge v6.3-rc4 into drm-next
I just landed the fence deadline PR from Rob that a bunch of drivers
want/need to apply driver-specific patches. Backmerge -rc4 so that
they don't have to be stuck on -rc2 for no reason at all.
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Variable dppclk_delay_subtotal is not effectively used, so delete it.
drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dcn314/display_rq_dlg_calc_314.c:1004:15: warning: variable 'dppclk_delay_subtotal' set but not used.
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Link: https://bugzilla.openanolis.cn/show_bug.cgi?id=4584
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
seamless_odm set was not picked up while
merging commit 2d017189e2b3 ("drm/amd/display:
Blank eDP on enable drv if odm enabled")
Fixes: 2d017189e2b3 ("drm/amd/display: Blank eDP on enable drv if odm enabled")
Reviewed-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Hersen Wu <hersenxs.wu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This DC version brings along:
- Power down eDP if eDP not present
- Set MPC_SPLIT_DYNAMIC for DCN10 and DCN301
- Initialize link_srv in virtual env
- Code cleanup and alignment
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
seamless_odm set was not picked up while
merging commit 2d017189e2b3 ("drm/amd/display:
Blank eDP on enable drv if odm enabled")
Fixes: 2d017189e2b3 ("drm/amd/display: Blank eDP on enable drv if odm enabled")
Reviewed-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Hersen Wu <hersenxs.wu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
Due to historic issues, commit_planes_for_stream() has grown differently
compared to latest dc code. Apply missed changes to make it aligned.
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Hersen Wu <hersenxs.wu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This reverts commit bcfab8e35ce81e2fd3230c1575024bfde0d28c8b.
Hopefully this is fixed by the previous patch to enable
TEMP_DEPENDENT_VMIN for navi1x or otherwise and we can re-enable
MPC_SPLIT_DYNAMIC for DCN 2.0 for better power savings.
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Since DC version 3.2.226, DC started to use a new internal commit
sequence that better deals with hardware limitations. Usually, DC adopts
split pipe dynamics to improve the display bandwidth and, in some cases,
to save power. This commit sets MPC_SPLIT_DYNAMIC for DCN301, improving
the bandwidth and fixing the cursor bug on KDE when it tries hardware
rotation.
Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/2247
Cc: Melissa Wen <mwen@igalia.com>
Cc: Xaver Hugl <xaver.hugl@gmail.com>
Reviewed-by: Melissa Wen <mwen@igalia.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Since DC version 3.2.226, DC started to use a new internal commit
sequence that better deals with multiple hardware constraints. One of
the improvements is a more reliable sequence for pipe split. Due to the
transition made in version 3.2.226, it should be more reliable to use
the pipe policy as MPC_SPLIT_DYNAMIC, and this commit makes this change.
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
missing change when port to these two dcn version.
Reviewed-by: Chris Park <Chris.Park@amd.com>
Reviewed-by: Leo Ma <hanghong.ma@amd.com>
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Charlene Liu <Charlene.Liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
- Add CRC for test support
- Add params to allow control into to DMUB.
Reviewed-by: Chris Park <Chris.Park@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Charlene Liu <Charlene.Liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
In order to follow the new protocol of calling link functions
[HOW]
Add the function pointer to the link_srv
Reviewed-by: Kshitij Bhardwaj <kshitij.bhardwaj1@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Mustapha Ghaddar <mghaddar@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
when refactoring to link_srv, we did not include the
virtual environment case where dc_construct_ctx gets
called instead of dc_construct
[how]
add initialize link_srv to dc_construct_ctx as well
Reviewed-by: Leo Ma <hanghong.ma@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Martin Leung <Martin.Leung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
When init, driver will power up eDP to check eDP
present or not. If eDP not present, driver doesn't
power off eDP VDD cause power consumption.
[How]
If eDP is not present when detection, power off eDP
VDD.
Reviewed-by: Wenjing Liu <Wenjing.Liu@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Paul Hsieh <Paul.Hsieh@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
Processing rate of the DP encoder, must be programmed to be the same as
DIG_FIFO_OUTPUT_ PROCESSING_MODE in DP mode
0: 1 pixel per cycle
1: 2 pixel per cycle
Reviewed-by: Alvin Lee <Alvin.Lee2@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Charlene Liu <Charlene.Liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
There is no need to wait vblank in the vupdate locked
region at a full type update
[HOW]
skip wait vblank when global sync change
Reviewed-by: Alvin Lee <Alvin.Lee2@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Zhikai Zhai <zhikai.zhai@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
When calling the dc_link_bw_kbps_from_raw_frl_link_rate_data from
amdgpu_dm, GCC highlighted the following issue:
In function ‘get_conv_frl_bw’:
error: passing argument 1 of
‘dc_link_bw_kbps_from_raw_frl_link_rate_data’ discards ‘const’ qualifier
from pointer target type [-Werror=discarded-qualifiers]
997 | aconnector->dc_link->dc,
This commit fix this issue by making DC a constant variable since we
only use it to invoke the function
bw_kbps_from_raw_frl_link_rate_data().
Reviewed-by: Chris Park <Chris.Park@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
Make DCN32 3dlut function non-static and thus
available for future DCNs.
Reviewed-by: Chris Park <Chris.Park@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Wesley Chalmers <Wesley.Chalmers@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
