IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
Legacy Display Unit (LDU) fb dirty support used a custom fb dirty callback. Latter
handled only the DIRTYFB IOCTL presentation path but not the ADDFB2/PAGE_FLIP/RMFB
IOCTL path, common for Wayland compositors.
Get rid of the custom callback in favor of drm_atomic_helper_dirtyfb and unify the
handling of the presentation paths inside of vmw_ldu_primary_plane_atomic_update.
This also homogenizes the fb dirty callbacks across all DUs: LDU, SOU and STDU.
Signed-off-by: Martin Krastev <krastevm@vmware.com>
Reviewed-by: Maaz Mombasawala <mombasawalam@vmware.com>
Fixes: 2f5544ff0300 ("drm/vmwgfx: Use atomic helper function for dirty fb IOCTL")
Cc: <stable@vger.kernel.org> # v5.0+
Signed-off-by: Zack Rusin <zackr@vmware.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230321020949.335012-3-zack@kde.org
Remove the flag prefer_shadow_fbdev from struct drm_mode_config.
Drivers set this flag to enable shadow buffering in the generic
fbdev emulation. Such shadow buffering is now mandatory, so the
flag is unused.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Zack Rusin <zackr@vmware.com>
Tested-by: Sui Jingfeng <suijingfeng@loongson.cn>
Link: https://patchwork.freedesktop.org/patch/msgid/20230320150751.20399-3-tzimmermann@suse.de
v3: Fix vmw_user_bo_lookup which was also dropping the gem reference
before the kernel was done with buffer depending on userspace doing
the right thing. Same bug, different spot.
It is possible for userspace to predict the next buffer handle and
to destroy the buffer while it's still used by the kernel. Delay
dropping the internal reference on the buffers until kernel is done
with them.
Instead of immediately dropping the gem reference in vmw_user_bo_lookup
and vmw_gem_object_create_with_handle let the callers decide when they're
ready give the control back to userspace.
Also fixes the second usage of vmw_gem_object_create_with_handle in
vmwgfx_surface.c which wasn't grabbing an explicit reference
to the gem object which could have been destroyed by the userspace
on the owning surface at any point.
Signed-off-by: Zack Rusin <zackr@vmware.com>
Fixes: 8afa13a0583f ("drm/vmwgfx: Implement DRIVER_GEM")
Reviewed-by: Martin Krastev <krastevm@vmware.com>
Reviewed-by: Maaz Mombasawala <mombasawalam@vmware.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230211050514.2431155-1-zack@kde.org
Various bits of the driver used raw ttm_buffer_object instead of the
driver specific vmw_bo object. All those places used to duplicate
the mapped bo caching policy of vmw_bo.
Instead of duplicating all of that code and special casing various
functions to work both with vmw_bo and raw ttm_buffer_object's unify
the buffer object handling code.
As part of that work fix the naming of bo's, e.g. insted of generic
backup use 'guest_memory' because that's what it really is.
All of it makes the driver easier to maintain and the code easier to
read. Saves 100+ loc as well.
Signed-off-by: Zack Rusin <zackr@vmware.com>
Reviewed-by: Martin Krastev <krastevm@vmware.com>
Reviewed-by: Maaz Mombasawala <mombasawalam@vmware.com>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20230131033542.953249-9-zack@kde.org
Problem with explicit placement selection in vmwgfx is that by the time
the buffer object needs to be validated the information about which
placement was supposed to be used is lost. To workaround this the driver
had a bunch of state in various places e.g. as_mob or cpu_blit to
somehow convey the information on which placement was intended.
Fix it properly by allowing the buffer objects to hold their preferred
placement so it can be reused whenever needed. This makes the entire
validation pipeline a lot easier both to understand and maintain.
Signed-off-by: Zack Rusin <zackr@vmware.com>
Reviewed-by: Martin Krastev <krastevm@vmware.com>
Reviewed-by: Maaz Mombasawala <mombasawalam@vmware.com>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20230131033542.953249-8-zack@kde.org
Rename dummy to is_iomem because that's what it is even if we're not
activelly using it. Makes the code easier to read.
Signed-off-by: Zack Rusin <zackr@vmware.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Martin Krastev <krastevm@vmware.com>
Reviewed-by: Maaz Mombasawala <mombasawalam@vmware.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230131033542.953249-7-zack@kde.org
Base mapped count is useless because the ttm unmap functions handle
null maps just fine so completely remove all the code related to it.
Signed-off-by: Zack Rusin <zackr@vmware.com>
Reviewed-by: Martin Krastev <krastevm@vmware.com>
Reviewed-by: Maaz Mombasawala <mombasawalam@vmware.com>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20230131033542.953249-6-zack@kde.org
Only the legacy display unit requires pinning of the fb memory in vram.
Both the screen objects and screen targets can present from any buffer.
That makes the pinning abstraction pointless. Simplify all of the code
and move it to the legacy display unit, the only place that needs it.
Signed-off-by: Zack Rusin <zackr@vmware.com>
Reviewed-by: Martin Krastev <krastevm@vmware.com>
Reviewed-by: Maaz Mombasawala <mombasawalam@vmware.com>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20230131033542.953249-5-zack@kde.org
The rest of the drivers which are using ttm have mostly standardized on
driver_prefix_bo as the name for subclasses of the TTM buffer object.
Make vmwgfx match the rest of the drivers and follow the same naming
semantics.
This is especially clear given that the name of the file in which the
object was defined is vmw_bo.c.
Signed-off-by: Zack Rusin <zackr@vmware.com>
Reviewed-by: Martin Krastev <krastevm@vmware.com>
Reviewed-by: Maaz Mombasawala <mombasawalam@vmware.com>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20230131033542.953249-4-zack@kde.org
Cursor snooping depended on implicit size and format which made debugging
quite difficult. Make the code easier to following by making everything
explicit and instead of using magic numbers predefine all the
parameters the code depends on.
Also fixes incorrectly computed pitches for non-aligned cursor snoops.
Fix which has no practical effect because non-aligned cursor snoops
are not used by the X11 driver and Wayland cursors will go through
mob cursors, instead of surface dma's.
Signed-off-by: Zack Rusin <zackr@vmware.com>
Reviewed-by: Michael Banack <banackm@vmware.com>
Reviewed-by: Martin Krastev <krastevm@vmware.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221026031936.1004280-2-zack@kde.org
Invalid userspace dma surface copies could potentially overflow
the memcpy from the surface to the snooped image leading to crashes.
To fix it the dimensions of the copybox have to be validated
against the expected size of the snooped cursor.
Signed-off-by: Zack Rusin <zackr@vmware.com>
Fixes: 2ac863719e51 ("vmwgfx: Snoop DMA transfers with non-covering sizes")
Cc: <stable@vger.kernel.org> # v3.2+
Reviewed-by: Michael Banack <banackm@vmware.com>
Reviewed-by: Martin Krastev <krastevm@vmware.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221026031936.1004280-1-zack@kde.org
The explicit vblank handling was never finished. The driver never had
the full implementation of vblank and what was there is emulated
by DRM when the driver doesn't pretend to be implementing it itself.
Let DRM handle the vblank emulation and stop pretending the driver is
doing anything special with vblank. In the future it would make sense
to implement helpers for full vblank handling because vkms and
amdgpu_vkms already have that code. Exporting it to common helpers and
having all three drivers share it would make sense (that would be largely
just to allow more of igt to run).
Signed-off-by: Zack Rusin <zackr@vmware.com>
Reviewed-by: Maaz Mombasawala <mombasawalam@vmware.com>
Reviewed-by: Martin Krastev <krastevm@vmware.com>
Reviewed-by: Michael Banack <banackm@vmware.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221022040236.616490-15-zack@kde.org
Instead of using vmwgfx specific framebuffer implementation use the drm
fb helpers. There's no change in functionality, the only difference
is a reduction in the amount of code inside the vmwgfx module.
drm fb helpers do not deal correctly with changes in crtc preferred mode
at runtime, but the old fb code wasn't dealing with it either.
Same situation applies to high-res fb consoles - the old code was
limited to 1176x885 because it was checking for legacy/deprecated
memory limites, the drm fb helpers are limited to the initial resolution
set on fb due to first problem (drm fb helpers being unable to handle
hotplug crtc preferred mode changes).
This also removes the kernel config for disabling fb support which hasn't
been used or supported in a very long time.
Signed-off-by: Zack Rusin <zackr@vmware.com>
Reviewed-by: Maaz Mombasawala <mombasawalam@vmware.com>
Reviewed-by: Martin Krastev <krastevm@vmware.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20221022040236.616490-14-zack@kde.org
Clean up the cursor mob path by moving ownership of the mobs into the
plane_state, and just leaving a cache of unused mobs in the plane
itself.
Signed-off-by: Michael Banack <banackm@vmware.com>
Signed-off-by: Zack Rusin <zackr@vmware.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221022040236.616490-7-zack@kde.org
The macro DRM_PLANE_HELPER_NO_SCALING is only useful with the interfaces
in drm_atomic_helper.h, but defined in drm_plane_helper.h. So half of
DRM includes the latter header file for using this macro. Move the macro
and remove the include statements.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220720083058.15371-3-tzimmermann@suse.de
Stop using the 'TRUE' define. This ultimately gets defined by
acpi/actypes.h that gets included here via a convoluted chain of
other headers. drm_crtc.h is part of that chain, and I'm trying
to eliminate all unnecessary includes from it to avoid pointless
rebuilds.
v2: Split out from the bigger patch
Cc: Zack Rusin <zackr@vmware.com>
Cc: VMware Graphics Reviewers <linux-graphics-maintainer@vmware.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220630195114.17407-2-ville.syrjala@linux.intel.com
Reviewed-by: Zack Rusin <zackr@vmware.com<mailto:zackr@vmware.com>>
The kms code wasn't validating the modifiers and was letting through
unsupported formats. rgb8 was never properly supported and has no
matching svga screen target format so remove it.
This fixes format/modifier failures in kms_addfb_basic from IGT.
Signed-off-by: Zack Rusin <zackr@vmware.com>
Reviewed-by: Martin Krastev <krastevm@vmware.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220318174332.440068-4-zack@kde.org
Writes to SVGA_REG_CURSOR_MOBID did not wait for the buffers to be fully
populated. This sometimes results in the device not being aware of
the buffer when the cursor mob register was written.
Properly wait for the buffer to be fully populated before setting it
as a cursor mob.
Signed-off-by: Zack Rusin <zackr@vmware.com>
Fixes: 485d98d472d5 ("drm/vmwgfx: Add support for CursorMob and CursorBypass 4")
Reviewed-by: Martin Krastev <krastevm@vmware.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220318174332.440068-3-zack@kde.org
Port of the vmwgfx to SVGAv3 lacked support for fencing. SVGAv3 removed
FIFO's and replaced them with command buffers and extra registers.
The initial version of SVGAv3 lacked support for most advanced features
(e.g. 3D) which made fences unnecessary. That is no longer the case,
especially as 3D support is being turned on.
Switch from FIFO commands and capabilities to command buffers and extra
registers to enable fences on SVGAv3.
Fixes: 2cd80dbd3551 ("drm/vmwgfx: Add basic support for SVGA3")
Signed-off-by: Zack Rusin <zackr@vmware.com>
Reviewed-by: Martin Krastev <krastevm@vmware.com>
Reviewed-by: Maaz Mombasawala <mombasawalam@vmware.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220302152426.885214-5-zack@kde.org
* Add support for CursorMob
* Add support for CursorBypass 4
* Refactor vmw_du_cursor_plane_atomic_update to be kms-helper-atomic
-- move BO mappings to vmw_du_cursor_plane_prepare_fb
-- move BO unmappings to vmw_du_cursor_plane_cleanup_fb
Cursor mobs are a new svga feature which enables support for large
cursors, e.g. large accessibility cursor on platforms with vmwgfx. It
also cleans up the cursor code and makes it more uniform with the rest
of modern guest backed objects support.
Signed-off-by: Martin Krastev <krastevm@vmware.com>
Reviewed-by: Zack Rusin <zackr@vmware.com>
Reviewed-by: Maaz Mombasawala <mombasawalam@vmware.com>
Signed-off-by: Zack Rusin <zackr@vmware.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220302152426.885214-2-zack@kde.org
A failing usercopy of the fence_rep object will lead to a stale entry in
the file descriptor table as put_unused_fd() won't release it. This
enables userland to refer to a dangling 'file' object through that still
valid file descriptor, leading to all kinds of use-after-free
exploitation scenarios.
Fix this by deferring the call to fd_install() until after the usercopy
has succeeded.
Fixes: c906965dee22 ("drm/vmwgfx: Add export fence to file descriptor support")
Signed-off-by: Mathias Krause <minipli@grsecurity.net>
Signed-off-by: Zack Rusin <zackr@vmware.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The fb handle code assumes it deals with GEM objects. Because vmwgfx
buffer objects were not actually GEM objects we were not able to
implement that interface. Now that vmwgfx supports GEM buffer objects
we can trivially implement create_handle for buffer object backed
framebuffers.
Among others this gets IGT's kms_getfb test passing.
Signed-off-by: Zack Rusin <zackr@vmware.com>
Reviewed-by: Martin Krastev <krastevm@vmware.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211206172620.3139754-6-zack@kde.org
This is initial change adding support for DRIVER_GEM to vmwgfx. vmwgfx
was written before GEM and has always used TTM. Over the years the
TTM buffers started inherting from GEM objects but vmwgfx never
implemented GEM making it quite awkward. We were directly setting
variables in GEM objects to not make DRM crash.
This change brings vmwgfx inline with other DRM drivers and allows us
to use a lot of DRM helpers which have depended on drivers with GEM
support.
Due to historical reasons vmwgfx splits the idea of a buffer and surface
which makes it a littly tricky since either one can be used in most
of our ioctl's which take user space handles. For now our BO's are
GEM objects and our surfaces are opaque objects which are backed by
GEM objects. In the future I'd like to combine those into a single
BO but we don't want to break any of our existing ioctl's so it will
take time to do it in a non-destructive way.
Signed-off-by: Zack Rusin <zackr@vmware.com>
Reviewed-by: Martin Krastev <krastevm@vmware.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211206172620.3139754-5-zack@kde.org
vmwgfx shared very elaborate memory accounting with ttm. It was moved
from ttm to vmwgfx in change
f07069da6b4c ("drm/ttm: move memory accounting into vmwgfx v4")
but because of complexity it was hard to maintain. Some parts of the code
weren't freeing memory correctly and some were missing accounting all
together. While those would be fairly easy to fix the fundamental reason
for memory accounting in the driver was the ability to invoke shrinker
which is part of TTM code as well (with support for unified memory
hopefully coming soon).
That meant that vmwgfx had a lot of code that was either unused or
duplicating code from TTM. Removing this code also prevents excessive
calls to global swapout which were common during memory pressure
because both vmwgfx and TTM would invoke the shrinker when memory
usage reached half of RAM.
Fixes: f07069da6b4c ("drm/ttm: move memory accounting into vmwgfx v4")
Signed-off-by: Zack Rusin <zackr@vmware.com>
Reviewed-by: Martin Krastev <krastevm@vmware.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211206172620.3139754-2-zack@kde.org
This reverts commit 6b92e77156c5adf6606c8ad825c71404417d88af.
This patchset breaks on intel platforms and was previously NACK'd by
Ville.
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Fernando Ramos <greenfoo@u92.eu>
Acked-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20211002154542.15800-12-sean@poorly.run
As requested in Documentation/gpu/todo.rst, replace driver calls to
drm_modeset_lock_all() with DRM_MODESET_LOCK_ALL_BEGIN() and
DRM_MODESET_LOCK_ALL_END()
Signed-off-by: Fernando Ramos <greenfoo@u92.eu>
Reviewed-by: Sean Paul <sean@poorly.run>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210924064324.229457-6-greenfoo@u92.eu
The code was using the old DRM logging functions, which made it
hard to figure out what was coming from vmwgfx. The newer logging
helpers include the driver name in the logs and make it explicit
which driver they're coming from. This allows us to standardize
our logging a bit and clean it up in the process.
vmwgfx is a little special because technically the hardware it's
running on can be anything from the last 12 years or so which is
why we need to include capabilities in the logs in the first
place or otherwise we'd have no way of knowing what were
the capabilities of the platform the guest was running in.
Signed-off-by: Zack Rusin <zackr@vmware.com>
Reviewed-by: Martin Krastev <krastevm@vmware.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210723165153.113198-2-zackr@vmware.com
Historically our device headers have been forked versions of the
internal device headers, this has made maintaining them a bit
of a burden. To fix the situation, going forward, the device headers
will be verbatim copies of the internal headers.
To do that the driver code has to be adapted to use pristine
device headers. This will make future update to the device
headers trivial and automatic.
Signed-off-by: Zack Rusin <zackr@vmware.com>
Reviewed-by: Martin Krastev <krastevm@vmware.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210615182336.995192-2-zackr@vmware.com
SVGA3 is the next version of our PCI device. Some of the changes
include using MMIO for register accesses instead of ioports,
deprecating the FIFO MMIO and removing a lot of the old and
legacy functionality. SVGA3 doesn't support guest backed
objects right now so everything except 3D is working.
v2: Fixes all the static analyzer warnings
Signed-off-by: Zack Rusin <zackr@vmware.com>
Cc: Martin Krastev <krastevm@vmware.com>
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210505191007.305872-1-zackr@vmware.com
Now since Christian reworked TTM to always keep objects on the LRU
list unless they are pinned we shouldn't need the reservation
semaphore. It makes the driver code a lot cleaner, especially
because it was a little hard to reason when and where the
reservation semaphore needed to be held.
Signed-off-by: Zack Rusin <zackr@vmware.com>
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210505035740.286923-5-zackr@vmware.com
The current atomic helpers have either their object state being passed as
an argument or the full atomic state.
The former is the pattern that was done at first, before switching to the
latter for new hooks or when it was needed.
Let's convert all the remaining helpers to provide a consistent
interface, starting with the planes atomic_check.
The conversion was done using the coccinelle script below plus some
manual changes for vmwgfx, built tested on all the drivers.
@@
identifier plane, plane_state;
symbol state;
@@
struct drm_plane_helper_funcs {
...
int (*atomic_check)(struct drm_plane *plane,
- struct drm_plane_state *plane_state);
+ struct drm_atomic_state *state);
...
}
@ plane_atomic_func @
identifier helpers;
identifier func;
@@
static const struct drm_plane_helper_funcs helpers = {
...,
.atomic_check = func,
...,
};
@@
struct drm_plane_helper_funcs *FUNCS;
identifier f;
identifier dev;
identifier plane, plane_state, state;
@@
f(struct drm_device *dev, struct drm_atomic_state *state)
{
<+...
- FUNCS->atomic_check(plane, plane_state)
+ FUNCS->atomic_check(plane, state)
...+>
}
@ ignores_new_state @
identifier plane_atomic_func.func;
identifier plane, new_plane_state;
@@
func(struct drm_plane *plane, struct drm_plane_state *new_plane_state)
{
... when != new_plane_state
}
@ adds_new_state depends on plane_atomic_func && !ignores_new_state @
identifier plane_atomic_func.func;
identifier plane, new_plane_state;
@@
func(struct drm_plane *plane, struct drm_plane_state *new_plane_state)
{
+ struct drm_plane_state *new_plane_state = drm_atomic_get_new_plane_state(state, plane);
...
}
@ depends on plane_atomic_func @
identifier plane_atomic_func.func;
identifier plane, new_plane_state;
@@
func(struct drm_plane *plane,
- struct drm_plane_state *new_plane_state
+ struct drm_atomic_state *state
)
{ ... }
@ include depends on adds_new_state @
@@
#include <drm/drm_atomic.h>
@ no_include depends on !include && adds_new_state @
@@
+ #include <drm/drm_atomic.h>
#include <drm/...>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20210219120032.260676-4-maxime@cerno.tech
Switch DRM drivers from drm_get_format_name() to %p4cc. This gets rid of a
large number of temporary variables at the same time.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20210216155723.17109-4-sakari.ailus@linux.intel.com
There's no need to check for the presence of the hotplug
property just to return because this is the end of the function
so we're returning either way.
Signed-off-by: Zack Rusin <zackr@vmware.com>
Reviewed-by: Martin Krastev <krastevm@vmware.com>
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210209161700.335611-2-zackr@vmware.com
Our sysfs "modes" entries were broken because our preffered mode
never had its name set correctly. This resulted in the first
entry simply being called "preferred" followed by a list of
other resolutions. Lets fix it by actually setting the name of
mode (which is its resolution). This allows one to quickly
validate the modes set by the open-vm-tools.
Signed-off-by: Zack Rusin <zackr@vmware.com>
Reviewed-by: Martin Krastev <krastevm@vmware.com>
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210209161700.335611-1-zackr@vmware.com
The default list was old and in particular lacking all common 16:9
resolutions, as well as some newer 16:10 ones.
This makes them selectable in resolution change lists, which can be
quite useful (for instance in case auto-fit isn't enabled).
Signed-off-by: Roland Scheidegger <sroland@vmware.com>
Reviewed-by: Martin Krastev <krastevm@vmware.com>
Reviewed-by: Zack Rusin <zackr@vmware.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210205010446.26559-1-sroland@vmware.com
Fixes the following W=1 kernel build warning(s):
In file included from drivers/gpu/drm/vmwgfx/vmwgfx_kms.c:37:
drivers/gpu/drm/vmwgfx/vmwgfx_kms.c:483: warning: Function parameter or member 'new_state' not described in 'vmw_du_cursor_plane_atomic_check'
drivers/gpu/drm/vmwgfx/vmwgfx_kms.c:483: warning: Excess function parameter 'state' description in 'vmw_du_cursor_plane_atomic_check'
drivers/gpu/drm/vmwgfx/vmwgfx_kms.c:1069: warning: Function parameter or member 'vfb' not described in 'vmw_framebuffer_pin'
drivers/gpu/drm/vmwgfx/vmwgfx_kms.c:1281: warning: Function parameter or member 'dev_priv' not described in 'vmw_kms_srf_ok'
drivers/gpu/drm/vmwgfx/vmwgfx_kms.c:1907: warning: Function parameter or member 'crtc' not described in 'vmw_get_vblank_counter'
drivers/gpu/drm/vmwgfx/vmwgfx_kms.c:1915: warning: Function parameter or member 'crtc' not described in 'vmw_enable_vblank'
drivers/gpu/drm/vmwgfx/vmwgfx_kms.c:1923: warning: Function parameter or member 'crtc' not described in 'vmw_disable_vblank'
drivers/gpu/drm/vmwgfx/vmwgfx_kms.c:2131: warning: Function parameter or member 'mode' not described in 'vmw_guess_mode_timing'
Cc: VMware Graphics <linux-graphics-maintainer@vmware.com>
Cc: Roland Scheidegger <sroland@vmware.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Zack Rusin <zackr@vmware.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210115181313.3431493-21-lee.jones@linaro.org
Fixes the following W=1 kernel build warning(s):
drivers/gpu/drm/vmwgfx/vmwgfx_kms.c: In function ‘vmw_du_primary_plane_atomic_check’:
drivers/gpu/drm/vmwgfx/vmwgfx_kms.c:460:31: warning: variable ‘vcs’ set but not used [-Wunused-but-set-variable]
Cc: VMware Graphics <linux-graphics-maintainer@vmware.com>
Cc: Roland Scheidegger <sroland@vmware.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Zack Rusin <zackr@vmware.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210115181313.3431493-5-lee.jones@linaro.org
We can't be setting the display_id register to an invalid value
because that makes our device reset the fb which causes nasty
flicker (due to destruction and creation of a new fb).
Also we can't be using the BITS_PER_PIXEL register if the
8BIT_EMULATION is not supported.
Signed-off-by: Zack Rusin <zackr@vmware.com>
Reviewed-by: Martin Krastev <krastevm@vmware.com>
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
Link: https://patchwork.freedesktop.org/patch/414041/?series=85516&rev=2
Lets try to cleanup the usage of the term FIFO which we used for
both our MMIO based cmd queue processing and for general
command processing which could have been using command buffers
interface. We're going to rename the functions which are processing
commands (and work either via MMIO or command buffers) as _cmd_
and functions which operate on the MMIO based commands as FIFO
to match the SVGA device naming.
Signed-off-by: Zack Rusin <zackr@vmware.com>
Reviewed-by: Martin Krastev <krastevm@vmware.com>
Link: https://patchwork.freedesktop.org/patch/414044/?series=85516&rev=2
Going forward the svga device might reuse mmio for general
register accesses, in order to prepare for that we need to
cleanup our naming and handling of fifo specific mmio reads
and writes. As part of this work lets switch to managed
mapping of the fifo mmio to make the error handling cleaner.
Signed-off-by: Zack Rusin <zackr@vmware.com>
Reviewed-by: Martin Krastev <krastevm@vmware.com>
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
Link: https://patchwork.freedesktop.org/patch/414045/?series=85516&rev=2
