IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
Update driver version to 8.4.1.0.0.
Signed-off-by: Ranjan Kumar <ranjan.kumar@broadcom.com>
Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com>
Link: https://lore.kernel.org/r/20230316110209.60145-9-ranjan.kumar@broadcom.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Update copyright year from 2022 to 2023.
Signed-off-by: Ranjan Kumar <ranjan.kumar@broadcom.com>
Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com>
Link: https://lore.kernel.org/r/20230316110209.60145-8-ranjan.kumar@broadcom.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Modify Message Unit Reset timeout value to 120 seconds from the previous
value of 30 seconds.
Signed-off-by: Ranjan Kumar <ranjan.kumar@broadcom.com>
Signed-off-by: Sreekant Reddy <sreekanth.reddy@broadcom.com>
Link: https://lore.kernel.org/r/20230316110209.60145-4-ranjan.kumar@broadcom.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Upon Virtual disk removal, firmware sends device status change event
(Virtual disk remove event) and expects the driver to start device remove
handshake (by sending target reset and IOU control command to firmware).
However, the driver does not initiate the device remove handshake which
leads to the firmware fault.
Signed-off-by: Ranjan Kumar <ranjan.kumar@broadcom.com>
Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com>
Link: https://lore.kernel.org/r/20230316110209.60145-2-ranjan.kumar@broadcom.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Add a missing resource clean up in .remove.
Fixes: e22bae30667a ("scsi: mpi3mr: Add expander devices to STL")
Signed-off-by: Tomas Henzl <thenzl@redhat.com>
Link: https://lore.kernel.org/r/20230302234336.25456-7-thenzl@redhat.com
Acked-by: Sathya Prakash Veerichetty <sathya.prakash@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
As part of Task Management handling, the driver will disable and enable the
MSIx index zero which belongs to the Admin reply queue. During this
transition the driver loses some interrupts and this leads to Admin request
and ioctl timeouts.
After enabling the interrupts, poll the Admin reply queue to avoid
timeouts.
Signed-off-by: Ranjan Kumar <ranjan.kumar@broadcom.com>
Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com>
Link: https://lore.kernel.org/r/20230228140835.4075-2-ranjan.kumar@broadcom.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
To allocate bitmaps, the mpi3mr driver calculates sizes of bitmaps using
byte as unit. However, bitmap helper functions assume that bitmaps are
allocated using unsigned long as unit. This gap causes memory access beyond
the bitmap sizes and results in "BUG: KASAN: slab-out-of-bounds". The BUG
was observed at firmware download to eHBA-9600. Call trace indicated that
the out-of-bounds access happened in find_first_zero_bit() called from
mpi3mr_send_event_ack() for miroc->evtack_cmds_bitmap.
To fix the BUG, do not use bytes to manage bitmap sizes. Instead, use
number of bits, and call bitmap helper functions which take number of bits
as arguments. For memory allocation, call bitmap_zalloc() instead of
kzalloc() and krealloc(). For memory free, call bitmap_free() instead of
kfree(). For zero clear, call bitmap_clear() instead of memset().
Remove three fields for bitmap byte sizes in struct scmd_priv which are no
longer required. Replace the field dev_handle_bitmap_sz with
dev_handle_bitmap_bits to keep number of bits of removepend_bitmap across
resize.
Link: https://lore.kernel.org/r/20230214005019.1897251-4-shinichiro.kawasaki@wdc.com
Fixes: c5758fc72b92 ("scsi: mpi3mr: Gracefully handle online FW update operation")
Fixes: e844adb1fbdc ("scsi: mpi3mr: Implement SCSI error handler hooks")
Fixes: c1af985d27da ("scsi: mpi3mr: Add Event acknowledgment logic")
Fixes: 824a156633df ("scsi: mpi3mr: Base driver code")
Signed-off-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com>
Acked-by: Sathya Prakash Veerichetty <sathya.prakash@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Fix 'scheduling while atomic' type bug, which is observed when
pci_irq_vector() is called from interrupt context.
Link: https://lore.kernel.org/r/20220912135742.11764-9-sreekanth.reddy@broadcom.com
Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Scan the target devices during system resume time and add or remove the
target device with the SML if the corresponding target device is newly
added or removed respectively.
Link: https://lore.kernel.org/r/20220912135742.11764-8-sreekanth.reddy@broadcom.com
Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Free the enclosure device objects during driver unload and before
rescanning the target devices during controller reset.
Link: https://lore.kernel.org/r/20220912135742.11764-7-sreekanth.reddy@broadcom.com
Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Implement graceful handling of surprise or orderly removal of PCIe HBA:
- Detect a hot removal of the controller at certain critical places in the
driver. Early detection will help to reduce the time taken for cleaning
up the hot-removed controller at the driver level.
- Poll the status of the port enable issued after reset once every 5
seconds to avoid a long delay in detecting unavailable controller.
Link: https://lore.kernel.org/r/20220912135742.11764-5-sreekanth.reddy@broadcom.com
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Update the host's SAS ports if there is change in port id or phys. If the
port id is changed, then the driver updates it. If some phys are
enabled/disabled during reset, then driver updates them in STL.
Check for the responding expander devices and update the device handle if
it got changed. Register the expander with STL if it got added during reset
and unregister the expander device if it got removed during reset.
[mkp: include fix for zeroday warning]
Link: https://lore.kernel.org/r/20220804131226.16653-15-sreekanth.reddy@broadcom.com
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Add support for the following SAS transport class callbacks:
- get_linkerrors
- get_enclosure_identifier
- get_bay_identifier
- phy_reset
- phy_enable
- set_phy_speed
- smp_handler
Link: https://lore.kernel.org/r/20220804131226.16653-14-sreekanth.reddy@broadcom.com
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Add framework to issue MPT transport commands to controllers. Also issue
the MPT transport commands to get the manufacturing info of SAS expander
device.
Link: https://lore.kernel.org/r/20220804131226.16653-13-sreekanth.reddy@broadcom.com
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Register/unregister the SAS, SATA devices to SCSI Transport Layer(STL)
whenever the corresponding device is added/removed from topology.
Link: https://lore.kernel.org/r/20220804131226.16653-12-sreekanth.reddy@broadcom.com
Reported-by: kernel test robot <lkp@intel.com>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
When device is registered with the STL then get the corresponding device's
target object using the rphy in below callback functions:
- mpi3mr_target_alloc()
- mpi3mr_slave_alloc()
- mpi3mr_slave_configure()
- mpi3mr_slave_destroy()
Link: https://lore.kernel.org/r/20220804131226.16653-11-sreekanth.reddy@broadcom.com
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Register/unregister the expander devices to SCSI Transport Layer(STL)
whenever the corresponding expander is added/removed from topology.
Link: https://lore.kernel.org/r/20220804131226.16653-10-sreekanth.reddy@broadcom.com
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Register the SAS, SATA devices to SCSI Transport Layer (STL) only if
multipath capability is disabled in the controller's firmware.
Link: https://lore.kernel.org/r/20220804131226.16653-9-sreekanth.reddy@broadcom.com
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Add the following helper functions:
- Update the host phys with STL
- Remove the device's SAS port with STL
Link: https://lore.kernel.org/r/20220804131226.16653-8-sreekanth.reddy@broadcom.com
Reviewed-by: Himanshu Madhani <himanshu.madani@oracle.com>
Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Add the following helper functions:
- Get the device's sas address by reading corresponding device's Device
page0
- Get the expander object from expander list based on expander's handle
- Get the target device object from target device list based on device's
sas address
- Get the expander device object from expander list based on expanders's
sas address
- Get hba port object from hba port table list based on port's port id
Link: https://lore.kernel.org/r/20220804131226.16653-7-sreekanth.reddy@broadcom.com
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Add framework to register and unregister the host and expander phys with
SCSI Transport Layer (STL).
Link: https://lore.kernel.org/r/20220804131226.16653-6-sreekanth.reddy@broadcom.com
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Enable and process the Enclosure device add event.
Link: https://lore.kernel.org/r/20220804131226.16653-5-sreekanth.reddy@broadcom.com
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Add helper functions to retrieve below controller's config pages:
- SAS IOUnit Page0
- SAS IOUnit Page1
- Driver Page1
- Device Page0
- SAS Phy Page0
- SAS Phy Page1
- SAS Expander Page0
- SAS Expander Page1
- Enclosure Page0
Also add the helper function to set SAS IOUnit Page1.
Link: https://lore.kernel.org/r/20220804131226.16653-4-sreekanth.reddy@broadcom.com
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Reduce the VD queue depth on detecting the throttling condition.
[mkp: incorporate fix for pointer cast issue reported by the test
robot and Guenter Roeck]
Link: https://lore.kernel.org/r/20220708195020.8323-3-sreekanth.reddy@broadcom.com
Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Update driver to track cumulative pending large data size at the controller
level and at the throttle group level. When one of the values meet or
exceed the controller's firmware-determined high threshold value, then the
driver will divert future selective I/O to the firmware. Once both
controller level and at the throttle group level cumulative pending large
data size reach controller's firmware determined low threshold value, then
the driver will stop diverting I/Os to the firmware.
Link: https://lore.kernel.org/r/20220708195020.8323-2-sreekanth.reddy@broadcom.com
Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
During driver unload, mrioc->bsg_device reference count becomes
negative. Also, as reported in [1], the driver's bsg_device model had few
more bugs. Fix all these up.
[1] https://marc.info/?l=linux-scsi&m=165183971411991&w=2
Link: https://lore.kernel.org/r/20220526170157.58274-1-sumit.saxena@broadcom.com
Fixes: 4268fa751365 ("scsi: mpi3mr: Add bsg device support")
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Tested-by: Tomas Henzl <thenzl@redhat.com>
Signed-off-by: Sumit Saxena <sumit.saxena@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Add sysfs attributes for exposing target device details such as SAS
address, firmware device handle, and persistent ID for the
controller-attached devices and RAID volumes.
Link: https://lore.kernel.org/r/20220517115310.13062-3-sreekanth.reddy@broadcom.com
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Add support for management applications to send an MPI3 Encapsulated NVMe
passthru command to the NVMe devices attached to an Avenger controller.
Since the NVMe drives are exposed as SCSI devices by the controller, the
standard NVMe applications cannot be used to interact with the drives and
the command sets supported are also limited by the controller firmware.
Special handling is required for MPI3 Encapsulated NVMe passthru commands
for PRP/SGL setup in the commands.
Link: https://lore.kernel.org/r/20220429211641.642010-8-sumit.saxena@broadcom.com
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Sumit Saxena <sumit.saxena@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Implement driver support for management applications to enable persistent
event log (PEL) notifications. Upon receipt of events, the driver will
increment a sysfs variable named event_counter. The management application
will poll for event_counter value changes and signal the application about
events.
Link: https://lore.kernel.org/r/20220429211641.642010-6-sumit.saxena@broadcom.com
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Sumit Saxena <sumit.saxena@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
There are certain management commands which require firmware intervention.
These commands are termed MPT commands. Add support for them.
Link: https://lore.kernel.org/r/20220429211641.642010-5-sumit.saxena@broadcom.com
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Sumit Saxena <sumit.saxena@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
This patch moves the data structures/definitions which are used by
userspace applications from MPI headers to uapi/scsi/scsi_bsg_mpi3mr.h
Link: https://lore.kernel.org/r/20220429211641.642010-4-sumit.saxena@broadcom.com
Reported by: Stephen Rothwell <sfr@canb.auug.org.au>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Sumit Saxena <sumit.saxena@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
There are certain bsg commands which need to be completed by the driver
without involving firmware. These requests are termed driver commands. Add
support for these.
Link: https://lore.kernel.org/r/20220429211641.642010-3-sumit.saxena@broadcom.com
Reported by: Stephen Rothwell <sfr@canb.auug.org.au>
Reported-by: kernel test robot <lkp@intel.com>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Sumit Saxena <sumit.saxena@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Create bsg device per controller for controller management purposes.
bsg device nodes will be named /dev/bsg/mpi3mrctl0, /dev/bsg/mpi3mrctl1,
etc.
Link: https://lore.kernel.org/r/20220429211641.642010-2-sumit.saxena@broadcom.com
Reported-by: kernel test robot <lkp@intel.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Sumit Saxena <sumit.saxena@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
This series consists of the usual driver updates (qla2xxx, pm8001,
libsas, smartpqi, scsi_debug, lpfc, iscsi, mpi3mr) plus minor updates
and bug fixes. The high blast radius core update is the removal of
write same, which affects block and several non-SCSI devices. The
other big change, which is more local, is the removal of the SCSI
pointer.
Signed-off-by: James E.J. Bottomley <jejb@linux.ibm.com>
-----BEGIN PGP SIGNATURE-----
iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCYjzDQyYcamFtZXMuYm90
dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishQMYAQDEWUGV
6U0+736AHVtOfiMNfiRN79B1HfXVoHvemnPcTwD/UlndwFfy/3GGOtoZmqEpc73J
Ec1HDuUCE18H1H2QAh0=
=/Ty9
-----END PGP SIGNATURE-----
Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI updates from James Bottomley:
"This series consists of the usual driver updates (qla2xxx, pm8001,
libsas, smartpqi, scsi_debug, lpfc, iscsi, mpi3mr) plus minor updates
and bug fixes.
The high blast radius core update is the removal of write same, which
affects block and several non-SCSI devices. The other big change,
which is more local, is the removal of the SCSI pointer"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (281 commits)
scsi: scsi_ioctl: Drop needless assignment in sg_io()
scsi: bsg: Drop needless assignment in scsi_bsg_sg_io_fn()
scsi: lpfc: Copyright updates for 14.2.0.0 patches
scsi: lpfc: Update lpfc version to 14.2.0.0
scsi: lpfc: SLI path split: Refactor BSG paths
scsi: lpfc: SLI path split: Refactor Abort paths
scsi: lpfc: SLI path split: Refactor SCSI paths
scsi: lpfc: SLI path split: Refactor CT paths
scsi: lpfc: SLI path split: Refactor misc ELS paths
scsi: lpfc: SLI path split: Refactor VMID paths
scsi: lpfc: SLI path split: Refactor FDISC paths
scsi: lpfc: SLI path split: Refactor LS_RJT paths
scsi: lpfc: SLI path split: Refactor LS_ACC paths
scsi: lpfc: SLI path split: Refactor the RSCN/SCR/RDF/EDC/FARPR paths
scsi: lpfc: SLI path split: Refactor PLOGI/PRLI/ADISC/LOGO paths
scsi: lpfc: SLI path split: Refactor base ELS paths and the FLOGI path
scsi: lpfc: SLI path split: Introduce lpfc_prep_wqe
scsi: lpfc: SLI path split: Refactor fast and slow paths to native SLI4
scsi: lpfc: SLI path split: Refactor lpfc_iocbq
scsi: lpfc: Use kcalloc()
...
There is a regular need in the kernel to provide a way to declare
having a dynamically sized set of trailing elements in a structure.
Kernel code should always use “flexible array members”[1] for these
cases. The older style of one-element or zero-length arrays should
no longer be used[2].
This code was transformed with the help of Coccinelle:
(next-20220214$ spatch --jobs $(getconf _NPROCESSORS_ONLN) --sp-file script.cocci --include-headers --dir . > output.patch)
@@
identifier S, member, array;
type T1, T2;
@@
struct S {
...
T1 member;
T2 array[
- 0
];
};
UAPI and wireless changes were intentionally excluded from this patch
and will be sent out separately.
[1] https://en.wikipedia.org/wiki/Flexible_array_member
[2] https://www.kernel.org/doc/html/v5.16/process/deprecated.html#zero-length-and-one-element-arrays
Link: https://github.com/KSPP/linux/issues/78
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
During controller reset, the driver tries to flush all the pending firmware
event works from worker queue that are queued prior to the reset. However,
if any work is waiting for device addition/removal operation to be
completed at the SML, then a deadlock is observed. This is due to the
controller reset waiting for the device addition/removal to be completed
and the device/addition removal is waiting for the controller reset to be
completed.
To limit this deadlock, continue with the controller reset handling without
canceling the work which is waiting for device addition/removal operation
to complete at SML.
Link: https://lore.kernel.org/r/20220210095817.22828-2-sreekanth.reddy@broadcom.com
Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Set reply queue depth of 1K for B0 and 4K for A0.
While freeing the segmented request queues use the actual queue depth that
is used while creating them.
Link: https://lore.kernel.org/r/20211220141159.16117-25-sreekanth.reddy@broadcom.com
Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Enhance driver to consider MPI3_IOCSTATUS_SCSI_IOC_TERMINATED as a success
for TMs issued by it and check the pending I/Os to decide the success or
failure of the task management requests instead of just considering the
MPI3_IOCSTATUS_SCSI_IOC_TERMINATED as a failure of the task management
request.
Link: https://lore.kernel.org/r/20211220141159.16117-24-sreekanth.reddy@broadcom.com
Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
