IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
Qualcomm SM8650 audio, compute and modem remoteproc are added. Qualcomm
X1 Elite audio and compute remoteprocs are added, after support for
shutting down the bootloader-loaded firmware loaded into the audio DSP..
A dozen drivers in the subsystem are transitioned to use devres helpers
for remoteproc and memory allocations.
It makes it possible to acquire in-kernel handle to individual
remoteproc instances in a cluster.
The release of DMA memory for remoteproc virtio is corrected to ensure
that restarting due to a watchdog bite doesn't attempt to allocate the
memory again without first freeing it.
Last, but not least, a couple of DeviceTree binding cleanups.
-----BEGIN PGP SIGNATURE-----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=na/C
-----END PGP SIGNATURE-----
Merge tag 'rproc-v6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux
Pull remoteproc updates from Bjorn Andersson:
"Qualcomm SM8650 audio, compute and modem remoteproc are added.
Qualcomm X1 Elite audio and compute remoteprocs are added, after
support for shutting down the bootloader-loaded firmware loaded into
the audio DSP..
A dozen drivers in the subsystem are transitioned to use devres
helpers for remoteproc and memory allocations - this makes it possible
to acquire in-kernel handle to individual remoteproc instances in a
cluster.
The release of DMA memory for remoteproc virtio is corrected to ensure
that restarting due to a watchdog bite doesn't attempt to allocate the
memory again without first freeing it.
Last, but not least, a couple of DeviceTree binding cleanups"
* tag 'rproc-v6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux: (30 commits)
remoteproc: qcom_q6v5_pas: Unload lite firmware on ADSP
remoteproc: qcom_q6v5_pas: Add support for X1E80100 ADSP/CDSP
dt-bindings: remoteproc: qcom,sm8550-pas: document the X1E80100 aDSP & cDSP
remoteproc: qcom_wcnss: Use devm_rproc_alloc() helper
remoteproc: qcom_q6v5_wcss: Use devm_rproc_alloc() helper
remoteproc: qcom_q6v5_pas: Use devm_rproc_alloc() helper
remoteproc: qcom_q6v5_mss: Use devm_rproc_alloc() helper
remoteproc: qcom_q6v5_adsp: Use devm_rproc_alloc() helper
dt-bindings: remoteproc: do not override firmware-name $ref
dt-bindings: remoteproc: qcom,glink-rpm-edge: drop redundant type from label
remoteproc: qcom: pas: correct data indentation
remoteproc: Make rproc_get_by_phandle() work for clusters
remoteproc: qcom: pas: Add SM8650 remoteproc support
remoteproc: qcom: pas: make region assign more generic
dt-bindings: remoteproc: qcom,sm8550-pas: document the SM8650 PAS
remoteproc: k3-dsp: Use devm_rproc_add() helper
remoteproc: k3-dsp: Use devm_ioremap_wc() helper
remoteproc: k3-dsp: Add devm action to release tsp
remoteproc: k3-dsp: Use devm_kzalloc() helper
remoteproc: k3-dsp: Use devm_ti_sci_get_by_phandle() helper
...
Use the device lifecycle managed allocation function. This helps prevent
mistakes like freeing out of order in cleanup functions and forgetting to
free on error paths.
Signed-off-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20240123184632.725054-1-afd@ti.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Add the .find_loaded_rsc_table operation for i.MX DSP.
We need it for inter-process communication between DSP
and main core.
This callback is used to find the resource table (defined
in remote processor linker script) where the address of the
vrings along with the other allocated resources (carveouts etc)
are stored.
If this is not found, the vrings are not allocated and
the IPC between cores will not work.
Signed-off-by: Iuliana Prodan <iuliana.prodan@nxp.com>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Link: https://lore.kernel.org/r/20231013152731.23471-2-iuliana.prodan@oss.nxp.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
The DT of_device.h and of_platform.h date back to the separate
of_platform_bus_type before it as merged into the regular platform bus.
As part of that merge prepping Arm DT support 13 years ago, they
"temporarily" include each other. They also include platform_device.h
and of.h. As a result, there's a pretty much random mix of those include
files used throughout the tree. In order to detangle these headers and
replace the implicit includes with struct declarations, users need to
explicitly include the correct includes.
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20230714174935.4063513-1-robh@kernel.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Without CONFIG_PM, the driver warns about unused functions:
drivers/remoteproc/imx_dsp_rproc.c:1210:12: error: 'imx_dsp_runtime_suspend' defined but not used [-Werror=unused-function]
1210 | static int imx_dsp_runtime_suspend(struct device *dev)
| ^~~~~~~~~~~~~~~~~~~~~~~
drivers/remoteproc/imx_dsp_rproc.c:1178:12: error: 'imx_dsp_runtime_resume' defined but not used [-Werror=unused-function]
1178 | static int imx_dsp_runtime_resume(struct device *dev)
| ^~~~~~~~~~~~~~~~~~~~~~
Change the old SET_SYSTEM_SLEEP_PM_OPS()/SET_RUNTIME_PM_OPS()
helpers to their modern replacements that avoid the warning,
and remove the now unnecessary __maybe_unused annotations
on the other PM helper functions.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Mukesh Ojha <quic_mojha@quicinc.com>
Reviewed-by: Iuliana Prodan <iuliana.prodan@nxp.com>
Link: https://lore.kernel.org/r/20230420213610.2219080-1-arnd@kernel.org
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Iuliana Prodan <iuliana.prodan@nxp.com>
Link: https://lore.kernel.org/r/20230504194453.1150368-3-u.kleine-koenig@pengutronix.de
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
The label “err_out” was used to jump to another pointer check
despite of the detail in the implementation of the function
“imx_dsp_rproc_mbox_alloc” that it was determined already
that the corresponding variable contained an error pointer
because of a failed call of the function “mbox_request_channel_byname”.
Thus perform the following adjustments:
1. Return directly after a call of the function
“mbox_request_channel_byname” failed for the input parameter “tx”.
2. Use more appropriate labels instead.
3. Reorder jump targets at the end.
4. Omit a function call and three extra checks.
This issue was detected by using the Coccinelle software.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Link: https://lore.kernel.org/r/d0e18bb1-afc4-8b6f-bb1c-b74b3bad908e@web.de
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Function of_phandle_iterator_next() calls of_node_put() on the last
device_node it iterated over, but when the loop exits prematurely it has
to be called explicitly.
Fixes: ec0e5549f358 ("remoteproc: imx_dsp_rproc: Add remoteproc driver for DSP on i.MX")
Cc: stable@vger.kernel.org
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Acked-by: Shengjiu Wang <shengjiu.wang@gmail.com>
Link: https://lore.kernel.org/r/20230320221826.2728078-6-mathieu.poirier@linaro.org
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
The IRAM is part of the HiFi DSP.
According to hardware specification only 32-bits write are allowed
otherwise we get a Kernel panic.
Therefore add a custom memory copy and memset functions to deal with
the above restriction.
Signed-off-by: Iuliana Prodan <iuliana.prodan@nxp.com>
Link: https://lore.kernel.org/r/20230221170356.27923-1-iuliana.prodan@oss.nxp.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
There are cases when we want to test a simple "hello world"
application on the DSP and we don't have IPC between the cores.
Therefore, do not wait for a confirmation from the remote processor
at start.
Added "no_mailboxes" flag while inserting the module to not initialize
any mailboxes, and so ignore remote processor reply after start.
By default, this is off - do not ignore reply from rproc.
Signed-off-by: Iuliana Prodan <iuliana.prodan@nxp.com>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Link: https://lore.kernel.org/r/20230217094124.9440-1-iuliana.prodan@oss.nxp.com
[Fixed checkpatch warning]
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
The workqueue may execute late even after remoteproc is stopped or
stopping, some resources (rpmsg device and endpoint) have been
released in rproc_stop_subdevices(), then rproc_vq_interrupt()
accessing these resources will cause kennel dump.
Call trace:
virtqueue_add_split+0x1ac/0x560
virtqueue_add_inbuf+0x4c/0x60
rpmsg_recv_done+0x15c/0x294
vring_interrupt+0x6c/0xa4
rproc_vq_interrupt+0x30/0x50
imx_dsp_rproc_vq_work+0x24/0x40 [imx_dsp_rproc]
process_one_work+0x1d0/0x354
worker_thread+0x13c/0x470
kthread+0x154/0x160
ret_from_fork+0x10/0x20
Add mutex protection in imx_dsp_rproc_vq_work(), if the state is
not running, then just skip calling rproc_vq_interrupt().
Also the flush workqueue operation can't be added in rproc stop
for the same reason. The call sequence is
rproc_shutdown
-> rproc_stop
->rproc_stop_subdevices
->rproc->ops->stop()
->imx_dsp_rproc_stop
->flush_work
-> rproc_vq_interrupt
The resource needed by rproc_vq_interrupt has been released in
rproc_stop_subdevices, so flush_work is not safe to be called in
imx_dsp_rproc_stop.
Fixes: ec0e5549f358 ("remoteproc: imx_dsp_rproc: Add remoteproc driver for DSP on i.MX")
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/1664524216-19949-1-git-send-email-shengjiu.wang@nxp.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
There are cases when we want to test a simple "hello world"
app on the DSP and we do not need a resource table.
remoteproc core allows us having an optional rsc_table.
Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
Acked-by: Shengjiu Wang <shengjiu.wang@gmail.com>
Link: https://lore.kernel.org/r/20220331103237.340796-1-daniel.baluta@oss.nxp.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
remoteproc elf loader supports the specific case that segments
have PT_LOAD and memsz/filesz set to zero, so no duplicate
code.
Acked-by: Daniel Baluta <daniel.baluta@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Link: https://lore.kernel.org/r/20220413033038.1715945-3-peng.fan@oss.nxp.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
When CONFIG_PM_SLEEP is disabled, we get a harmless warning:
drivers/remoteproc/imx_dsp_rproc.c:1145:12: error: 'imx_dsp_resume' defined but not used [-Werror=unused-function]
1145 | static int imx_dsp_resume(struct device *dev)
| ^~~~~~~~~~~~~~
drivers/remoteproc/imx_dsp_rproc.c:1110:12: error: 'imx_dsp_suspend' defined but not used [-Werror=unused-function]
1110 | static int imx_dsp_suspend(struct device *dev)
| ^~~~~~~~~~~~~~~
Mark these as __maybe_unused to get a clean build.
Fixes: ec0e5549f358 ("remoteproc: imx_dsp_rproc: Add remoteproc driver for DSP on i.MX")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20211014075239.3714694-1-arnd@kernel.org
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Provide a basic driver to control DSP processor found on NXP i.MX8QM,
i.MX8QXP, i.MX8MP and i.MX8ULP.
Currently it is able to resolve addresses between DSP and main CPU,
start and stop the processor, suspend and resume.
The communication between DSP and main CPU is based on mailbox, there
are three mailbox channels (tx, rx, rxdb).
This driver was tested on NXP i.MX8QM, i.MX8QXP, i.MX8MP and i.MX8ULP.
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Link: https://lore.kernel.org/r/1633944015-789-4-git-send-email-shengjiu.wang@nxp.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
