IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
- move the length calculation from dlc to real length (using canfd_frame)
- allow to switch the driver between CAN and CAN FD (change of MTU)
Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
- update sanity checks
- add DLC to length conversion helpers
- can_dlc2len() - get data length from can_dlc with sanitized can_dlc
- can_len2dlc() - map the sanitized data length to an appropriate DLC
Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
- introduce a new sockopt CAN_RAW_FD_FRAMES to allow CAN FD frames
- handle CAN frames and CAN FD frames simultaneously when enabled
Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
- handle ETH_P_CAN and ETH_P_CANFD skbuffs
- update sanity checks for CAN and CAN FD
- make sure the CAN frame can pass the selected CAN netdevice on send
- bump core version and abi version to indicate the new CAN FD support
Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
- add new struct canfd_frame
- check identical element offsets in struct can_frame and struct canfd_frame
- new ETH_P_CANFD definition to tag CAN FD skbs correctly
- add CAN_MTU and CANFD_MTU definitions for easy frame and mode detection
- add CAN[FD]_MAX_[DLC|DLEN] helper constants to remove hard coded values
- update existing struct can_frame with helper constants and comments
Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
add_virtual_intf() needs to return an ERR_PTR(), instead of NULL,
on errors, otherwise cfg80211 will crash.
Reported-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: Bing Zhao <bzhao@marvell.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
"qual" used to be declared on the stack, but then in 998a5a7d6a ("airo:
reduce stack memory footprint") we made it dynamically allocated.
Unfortunately the memcpy() here was missed and it's still copying stack
memory instead of the data that we want. In other words, "&qual" should
be "qual".
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
When running heavy traffic we stop the tx queue if the pending
packet count reaches certain threshold. Later, the tx queue should
be woken up as soon as the packet count falls below the threshold.
Current code wakes TX queue up on STA interface only. Removing the
check for STA interface will allow both STA and AP interfaces to
resume transmit when tx_pending count becomes low.
Signed-off-by: Avinash Patil <patila@marvell.com>
Signed-off-by: Bing Zhao <bzhao@marvell.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
spin_unlock_bh(&txq->lock) already disables softirqs so we don't want
to do it here. Fixes smatch warnings:
drivers/net/wireless/ath/ath5k/base.c:1048 ath5k_drain_tx_buffs() error: double lock 'bottom_half:'
drivers/net/wireless/ath/ath5k/base.c:1056 ath5k_drain_tx_buffs() error: double unlock 'bottom_half:'
Reported-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Bob Copeland <me@bobcopeland.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
After setup_frame_info has been called, only info->control.rates is still
valid, other control fields have been overwritten by the ath_frame_info
data. Move the access to info->control.vif for checking short preamble
to setup_frame_info before it gets overwritten.
This regression was introduced in commit d47a61aa
"ath9k: Fix multi-VIF BSS handling"
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Reported-by: Thomas Hühn <thomas@net.t-labs.tu-berlin.de>
Acked-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Cc: stable@vger.kernel.org [3.4]
Signed-off-by: John W. Linville <linville@tuxdriver.com>
The rate pointer variable for a rate series is used in a loop before it is
initialized. This went unnoticed because it was used earlier for the RTS/CTS
rate. This bug can lead to the wrong PHY type being passed to the
duration calculation function.
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Cc: stable@kernel.org
Signed-off-by: John W. Linville <linville@tuxdriver.com>
On a freescale imx6q platform, a hardware phy chip KSZ9021 is
recognized as a KS8001 chip by the current driver like this:
eth0: Freescale FEC PHY driver [Micrel KS8001 or KS8721]
KSZ9021 has phy_id 0x00221610, while KSZ8001 has phy_id
0x0022161a, the current phy_id_mask (0x00fffff0/0x00ffff10) can't
distinguish them. So change phy_id_mask to resolve this problem.
Although the micrel datasheet says that the 4 LSB of phyid2 register
contains the chip revision number and the current driver is designed
to follow this rule, in reality the chip implementation doesn't follow
it.
Cc: David J. Choi <david.choi@micrel.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com>
Signed-off-by: Hui Wang <jason77.wang@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch removes some nowadays superfluous definitions (one unused define and
an obsolete function forward declaration) and corrects a netdev_err() to
netdev_dbg().
Signed-off-by: Roland Stigge <stigge@antcom.de>
Signed-off-by: Alexandre Pereira da Silva <aletes.xgr@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
net/sctp/protocol.c: In function ‘sctp_addr_wq_timeout_handler’:
net/sctp/protocol.c:676: warning: label ‘free_next’ defined but not used
Signed-off-by: Daniel Halperin <dhalperi@cs.washington.edu>
Signed-off-by: David S. Miller <davem@davemloft.net>
ERROR: "nfqnl_ct_parse" [net/netfilter/nfnetlink_queue.ko] undefined!
ERROR: "nfqnl_ct_seq_adjust" [net/netfilter/nfnetlink_queue.ko] undefined!
ERROR: "nfqnl_ct_put" [net/netfilter/nfnetlink_queue.ko] undefined!
ERROR: "nfqnl_ct_get" [net/netfilter/nfnetlink_queue.ko] undefined!
We have to use CONFIG_NETFILTER_NETLINK_QUEUE_CT in
include/net/netfilter/nfnetlink_queue.h, not CONFIG_NF_CONNTRACK.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pablo says:
====================
The following patchset provides fixes for issues that were recently introduced
by my new cthelper infrastructure. They have been spotted by Randy Dunlap,
Andrew Morton and Dan Carpenter.
The patches provide:
* compilation fixes if CONFIG_NF_CONNTRACK is disabled: I moved all the
conntrack code from nfnetlink_queue.c to nfnetlink_queue_ct.c to avoid
peppering the entire code with lots of ifdefs. I needed to rename
nfnetlink_queue.c to nfnetlink_queue_core.c to get it working with the
Makefile tweaks I've added.
* fix NULL pointer dereference via ctnetlink while trying to change the helper
for an existing conntrack entry. I don't find any reasonable use case for
changing the helper from one to another in run-time. Thus, now ctnetlink
returns -EOPNOTSUPP for this operation.
* fix possible out-of-bound zeroing of the conntrack extension area due to
the helper automatic assignation routine.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Vendor-specific events shall be processed in driver and not sent
to bluetooth stack where they screw up HCI command countings.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
In "9cb0176 netfilter: add glue code to integrate nfnetlink_queue and ctnetlink"
the compilation with NF_CONNTRACK disabled is broken. This patch fixes this
issue.
I have moved the conntrack part into nfnetlink_queue_ct.c to avoid
peppering the entire nfnetlink_queue.c code with ifdefs.
I also needed to rename nfnetlink_queue.c to nfnetlink_queue_pkt.c
to update the net/netfilter/Makefile to support conditional compilation
of the conntrack integration.
This patch also adds CONFIG_NETFILTER_QUEUE_CT in case you want to explicitly
disable the integration between nf_conntrack and nfnetlink_queue.
Reported-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
/proc/net/ipv6_route reflects the contents of fib_table_hash. The proc
handler is installed in ip6_route_net_init() whereas fib_table_hash is
allocated in fib6_net_init() _after_ the proc handler has been installed.
This opens up a short time frame to access fib_table_hash with its pants
down.
Move the registration of the proc files to a later point in the init
order to avoid the race.
Tested :-)
Signed-off-by: Thomas Graf <tgraf@suug.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch fixes the compilation of net/netfilter/nfnetlink_cthelper.c
if CONFIG_NF_CONNTRACK is not set.
This patch also moves the definition of the cthelper infrastructure to
the scope of NF_CONNTRACK things.
I have also renamed NETFILTER_NETLINK_CTHELPER by NF_CT_NETLINK_HELPER,
to use similar names to other nf_conntrack_netlink extensions. Better now
that this has been only for two days in David's tree.
Two new dependencies have been added:
* NF_CT_NETLINK
* NETFILTER_NETLINK_QUEUE
Since these infrastructure requires both ctnetlink and nfqueue.
Reported-by: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
This patch modifies __nf_ct_try_assign_helper in a way that invalidates support
for the following scenario:
1) attach the helper A for first time when the conntrack is created
2) attach new (different) helper B due to changes the reply tuple caused by NAT
eg. port redirection from TCP/21 to TCP/5060 with both FTP and SIP helpers
loaded, which seems to be a quite unorthodox scenario.
I can provide a more elaborated patch to support this scenario but explicit
helper attachment provides a better solution for this since now the use can
attach the helpers consistently, without relying on the automatic helper
lookup magic.
This patch fixes a possible out of bound zeroing of the conntrack helper
extension if the helper B uses more memory for its private data than
helper A.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
The patch 1afc56794e03: "netfilter: nf_ct_helper: implement variable
length helper private data" from Jun 7, 2012, leads to the following
Smatch complaint:
net/netfilter/nf_conntrack_netlink.c:1231 ctnetlink_change_helper()
error: we previously assumed 'help->helper' could be null (see line 1228)
This NULL dereference can be triggered with the following sequence:
1) attach the helper for first time when the conntrack is created.
2) remove the helper module or detach the helper from the conntrack
via ctnetlink.
3) attach helper again (the same or different one, no matter) to the
that existing conntrack again via ctnetlink.
This patch fixes the problem by removing the use case that allows you
to re-assign again a helper for one conntrack entry via ctnetlink since
I cannot find any practical use for it.
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
To ensure an entry isn't added twice all comparisons have to be protected by the
hash line write spinlock. This doesn't really hurt as the case that it is tried
to add an element already present to the hash shouldn't occur very often, so in
most cases the lock would have have to be taken anyways.
Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
Acked-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Each time a new log level is added the developer must change either the DBG_ALL
enum definition and the hard coded value in the bat_sysfs.c for the log_level
attribute max value. This is extremely error prone.
With this patch the code directly uses DBG_ALL in the sysfs definition
Signed-off-by: Antonio Quartulli <ordex@autistici.org>
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Prior to this patch the translation table code made assumptions about how
the routing protocol works and where its buffers are stored (to directly
modify them).
Each protocol now calls the tt code with the relevant pointers, thereby
abstracting the code.
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
Acked-by: Antonio Quartulli <ordex@autistici.org>
Signed-off-by: Sven Eckelmann <sven@narfation.org>
The primary entry and the corresponding secondary entries are missing when there
are no neighbors on the primary interface. This also causes the TT entries to
miss and makes nodes with multiply secondary interface fall apart since there
is no way to see they are related without a primary entry.
Fix this by always emitting a primary entry.
Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
Signed-off-by: Sven Eckelmann <sven@narfation.org>
just keep it net-endian all along
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
[lindner_marek@yahoo.de: fix checkpatch warnings]
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
Signed-off-by: Sven Eckelmann <sven@narfation.org>
memcpy() arguments are void *, precisely to avoid that kind of pointless
casts.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
Acked-by: Antonio Quartulli <ordex@autistici.org>
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Added additional counters in a bat_stats structure, which are exported
through the ethtool api. The counters are specific to batman-adv and
includes:
forwarded packets and bytes
management packets and bytes (aggregated OGMs at this point)
translation table packets
New counters are added by extending "enum bat_counters" in types.h and
adding corresponding descriptive string(s) to bat_counters_strings in
soft-iface.c.
Counters are increased by calling batadv_add_counter() and incremented
by one by calling batadv_inc_counter().
Signed-off-by: Martin Hundebøll <martin@hundeboll.net>
Signed-off-by: Sven Eckelmann <sven@narfation.org>
In the code we neever need to atomically check and set the bat_priv->tt_crc
field value. It is simply set and read once in different pieces of the code.
Therefore this field can be safely be converted from atomic_t to uint16_t.
Reported-by: Al Viro <viro@ZenIV.linux.org.uk>
Signed-off-by: Antonio Quartulli <ordex@autistici.org>
Signed-off-by: Sven Eckelmann <sven@narfation.org>
The hash for claim and backbone hash in the bridge loop avoidance code receive
the same key because they are getting initialized by hash_new with the same
key. Lockdep will create a backtrace when they are used recursively. This can
be avoided by reinitializing the key directly after the hash_new.
Signed-off-by: Sven Eckelmann <sven@narfation.org>
skb_linearize(skb) possibly rearranges the skb internal data and then changes
the skb->data pointer value. For this reason any other pointer in the code that
was assigned skb->data before invoking skb_linearise(skb) must be re-assigned.
In the current tt_query message handling code this is not done and therefore, in
case of skb linearization, the pointer used to handle the packet header ends up
in pointing to poisoned memory. The packet is then dropped but the
translation-table mechanism is corrupted.
Signed-off-by: Antonio Quartulli <ordex@autistici.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Sven Eckelmann <sven@narfation.org>
It makes no sense to execute this limit test every time we create a
routing cache entry.
We can't simply error out on these things since we've silently
accepted and truncated them forever.
Signed-off-by: David S. Miller <davem@davemloft.net>
Transmitted skbs can be freed immediately in lpc_eth_hard_start_xmit()
instead of at TX completion, since driver copies the frames in DMA area.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Tested-by: Roland Stigge <stigge@antcom.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
