IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
commit f8fbcdfb06 upstream.
Asus Zenbook 14 UM431D has two speaker pins and a headphone pin, and
the auto-parser ends up assigning the bass to the third DAC 0x06.
Although the tone comes out, it's inconvenient because this DAC has no
volume control unlike two other DACs.
For obtaining the volume control for the bass speaker, this patch
enforces the mapping to let both front and bass speaker pins sharing
the same DAC. It's not ideal but a little bit of improvement.
Since we've already applied the same workaround for another ASUS
machine, we just need to hook the chain to the existing quirk.
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=212547
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210620065952.18948-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 434591b2a7 upstream.
On HP Spectre x360 15-df0xxx, after system boot with plugged headset, the
headset mic are not detected.
Moving pincfg and DAC's config to single fixup function fix this.
[ The actual bug in the original code was that it used a chain to
ALC286_FIXUP_SPEAKER2_TO_DAC1, and it contains not only the DAC1
route fix but also another chain to ALC269_FIXUP_THINKPAD_ACPI.
I thought the latter one is harmless for non-Thinkpad, but it
doesn't seem so; it contains again yet another chain to
ALC269_FIXUP_SKI_IGNORE, and this might be bad for some machines,
including this HP machine. -- tiwai ]
Signed-off-by: Elia Devito <eliadevito@gmail.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210619204105.5682-1-eliadevito@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 57c9e21a49 upstream.
There are 2 issues on this machine, the 1st one is mic's plug/unplug
can't be detected, that is because the mic is set to manual detecting
mode, need to apply ALC255_FIXUP_XIAOMI_HEADSET_MIC to set it to auto
detecting mode. The other one is headphone's plug/unplug can't be
detected by pulseaudio, that is because the pulseaudio will use
ucm2/sof-hda-dsp on this machine, and the ucm2 only handle
'Headphone Jack', but on this machine the headphone's pincfg sets the
location to Front, then the alsa mixer name is "Front Headphone Jack"
instead of "Headphone Jack", so override the pincfg to change location
to Left.
BugLink: http://bugs.launchpad.net/bugs/1930188
Cc: <stable@vger.kernel.org>
Signed-off-by: Hui Wang <hui.wang@canonical.com>
Link: https://lore.kernel.org/r/20210608024600.6198-1-hui.wang@canonical.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b8b90c1760 upstream.
The patch_realtek.c needs to check if the power_state.event equals
PM_EVENT_SUSPEND, after using the direct-complete, the suspend() and
resume() will be skipped if the codec is already rt_suspended, in this
case, the patch_realtek.c will always get PM_EVENT_ON even the system
is really resumed from S3.
We could set power_state to PMSG_SUSPEND in the prepare(), if other
PM functions are called before complete(), those functions will
override power_state; if no other PM functions are called before
complete(), we could know the suspend() and resume() are skipped since
only S3 pm functions could be skipped by direct-complete, in this case
set power_state to PMSG_RESUME in the complete(). This could guarantee
the first time of calling hda_codec_runtime_resume() after complete()
has the correct power_state.
Fixes: 215a22ed31 ("ALSA: hda: Refactor codec PM to use direct-complete optimization")
Cc: <stable@vger.kernel.org>
Signed-off-by: Hui Wang <hui.wang@canonical.com>
Link: https://lore.kernel.org/r/20210602145424.3132-1-hui.wang@canonical.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 119b75c150 upstream.
On some ASUS and MSI machines, the audio codec is alc1220 and the
Headphone is connected to audio mixer 0xf and DAC 0x5, in theory
the Headphone volume is controlled by DAC 0x5 (Heapdhone Playback
Volume), but somehow it is controlled by DAC 0x2 (Front Playback
Volume), maybe this is a defect on the codec alc1220.
Because of this issue, the PA couldn't switch the headphone and
Lineout correctly, If we apply the quirk CLEVO_P950 to those machines,
the Lineout and Headphone will share the audio mixer 0xc and DAC 0x2,
and generate Headphone+LO mixer, then PA could handle them when
switching between them.
BugLink: https://gitlab.freedesktop.org/pipewire/pipewire/-/issues/1206
Cc: <stable@vger.kernel.org>
Signed-off-by: Hui Wang <hui.wang@canonical.com>
Link: https://lore.kernel.org/r/20210522034741.13415-1-hui.wang@canonical.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 8822702f6e upstream.
Ubuntu users reported an audio bug on the Lenovo Yoga Slim 7 14IIL05,
he installed dual OS (Windows + Linux), if he booted to the Linux
from Windows, the Speaker can't work well, it has crackling noise,
if he poweroff the machine first after Windows, the Speaker worked
well.
Before rebooting or shutdown from Windows, the Windows changes the
codec eapd coeff value, but the BIOS doesn't re-initialize its value,
when booting into the Linux from Windows, the eapd coeff value is not
correct. To fix it, set the codec default value to that coeff register
in the alsa driver.
BugLink: http://bugs.launchpad.net/bugs/1925057
Suggested-by: Kailang Yang <kailang@realtek.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Hui Wang <hui.wang@canonical.com>
Link: https://lore.kernel.org/r/20210507024452.8300-1-hui.wang@canonical.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c1f0616124 upstream.
The interrupt handler of intel8x0 calls snd_intel8x0_update() whenever
the hardware sets the corresponding status bit for each stream. This
works fine for most cases as long as the hardware behaves properly.
But when the hardware gives a wrong bit set, this leads to a zero-
division Oops, and reportedly, this seems what happened on a VM.
For fixing the crash, this patch adds a internal flag indicating that
the stream is ready to be updated, and check it (as well as the flag
being in suspended) to ignore such spurious update.
Cc: <stable@vger.kernel.org>
Reported-and-tested-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Link: https://lore.kernel.org/r/s5h5yzi7uh0.wl-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit f48652bbe3 ]
Without this change, the DAC ctl's name could be changed only when
the machine has both Speaker and Headphone, but we met some machines
which only has Lineout and Headhpone, and the Lineout and Headphone
share the Audio Mixer0 and DAC0, the ctl's name is set to "Front".
On most of machines, the "Front" is used for Speaker only or Lineout
only, but on this machine it is shared by Lineout and Headphone,
This introduces an issue in the pipewire and pulseaudio, suppose users
want the Headphone to be on and the Speaker/Lineout to be off, they
could turn off the "Front", this works on most of the machines, but on
this machine, the "Front" couldn't be turned off otherwise the
headphone will be off too. Here we do some change to let the ctl's
name change to "Headphone+LO" on this machine, and pipewire and
pulseaudio already could handle "Headphone+LO" and "Speaker+LO".
(https://gitlab.freedesktop.org/pipewire/pipewire/-/issues/747)
BugLink: http://bugs.launchpad.net/bugs/804178
Signed-off-by: Hui Wang <hui.wang@canonical.com>
Link: https://lore.kernel.org/r/20210504073917.22406-1-hui.wang@canonical.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0c37e2eb6b ]
When snd-hda-codec-hdmi is used with ASoC HDA controller like SOF (acomp
used for ELD notifications), display connection change done during suspend,
can be lost due to following sequence of events:
1. system in S3 suspend
2. DP/HDMI receiver connected
3. system resumed
4. HDA controller resumed, but card->deferred_resume_work not complete
5. acomp eld_notify callback
6. eld_notify ignored as power state is not CTL_POWER_D0
7. HDA resume deferred work completed, power state set to CTL_POWER_D0
This results in losing the notification, and the jack state reported to
user-space is not correct.
The check on step 6 was added in commit 8ae743e82f ("ALSA: hda - Skip
ELD notification during system suspend"). It would seem with the deferred
resume logic in ASoC core, this check is not safe.
Fix the issue by modifying the check to use "dev.power.power_state.event"
instead of ALSA specific card power state variable.
BugLink: https://github.com/thesofproject/linux/issues/2825
Suggested-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20210416131157.1881366-1-kai.vehmanen@linux.intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 622464c893 upstream.
HP Envy AiO 32-a12xxx has an external amp that is controlled via GPIO
bit 0x04. However, unlike other devices, this amp seems to shut down
itself after the certain period, hence the OS needs to up/down the bit
dynamically only during the actual playback.
This patch adds the control of the GPIO bit via the existing pcm_hook
mechanism. Ideally it should be triggered at the actual stream start,
but we have only the state change at prepare/cleanup, so use those for
switching the GPIO bit on/off. This should be good enough for the
purpose, and was actually confirmed to work fine.
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=212873
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210504091802.13200-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 266fd994b2 upstream.
In 9bbb94e57d ("ALSA: hda/realtek: fix static noise on ALC285 Lenovo
laptops") an existing Lenovo quirk was made more generic by removing a
0x12 pin requirement from the entry. This made the second chance table
Thinkpad jack entry unreachable as the pin configurations became
identical.
Revert the 0x12 pin requirement removal and move Thinkpad jack pin quirk
back to the primary pin table as they can co-exist when more specific
configurations come first.
Add a more targeted pin quirk for Lenovo devices that have 0x12 as
0x40000000.
Tested on Yoga 6 (AMD) laptop.
[ Corrected the commit ID -- tiwai ]
Fixes: 9bbb94e57d ("ALSA: hda/realtek: fix static noise on ALC285 Lenovo laptops")
Signed-off-by: Sami Loone <sami@loone.fi>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/YI0oefvTYn8URYDb@yoga
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit defce244b0 upstream.
The quirk entry for Uniwill ECS M31EI is with the PCI SSID device 0,
which means matching with all. That is, it's essentially equivalent
with SND_PCI_QUIRK_VENDOR(0x1584), which also matches with the
previous entry for Haier W18 applying the very same quirk.
Let's unify them with the single vendor-quirk entry.
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210428112704.23967-13-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 45461e3b55 upstream.
Just re-order the alc269_fixup_tbl[] entries for HP devices for
avoiding the oversight of the duplicated or unapplied item in future.
No functional changes.
Formerly, some entries were grouped for the actual codec, but this
doesn't seem reasonable to keep in that way. So now we simply keep
the PCI SSID order for the whole.
Also Cc-to-stable for the further patch applications.
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210428112704.23967-5-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
