IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
Initialize err local variable to return -EAGAIN if the asid cannot be
found thus avoiding returning uninitialized value.
Fixes: 8fcd20c307 ("vdpa/mlx5: Support different address spaces for control and data")
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Eli Cohen <elic@nvidia.com>
Message-Id: <20220811134010.952291-1-elic@nvidia.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Expose VIRTIO_BLK_F_DISCARD and VIRTIO_BLK_F_WRITE_ZEROES features
to the drivers and handle VIRTIO_BLK_T_DISCARD and
VIRTIO_BLK_T_WRITE_ZEROES requests checking ranges and flags.
The simulator behaves like a ramdisk, so for VIRTIO_BLK_F_DISCARD
does nothing, while for VIRTIO_BLK_T_WRITE_ZEROES sets to 0 the
specified region.
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Message-Id: <20220811083632.77525-5-sgarzare@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The simulator behaves like a ramdisk, so we don't have to do
anything when a VIRTIO_BLK_T_FLUSH request is received, but it
could be useful to test driver behavior.
Let's expose the VIRTIO_BLK_F_FLUSH feature to inform the driver
that we support the flush command.
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Message-Id: <20220811083632.77525-4-sgarzare@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Next patches will add handling of other requests, where will be
useful to reuse vdpasim_blk_check_range().
So let's make it more generic by adding the `max_sectors` parameter,
since different requests allow different numbers of maximum sectors.
Let's also print the messages directly in vdpasim_blk_check_range()
to avoid duplicate prints.
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Message-Id: <20220811083632.77525-3-sgarzare@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
VIRTIO spec states: "The sector number indicates the offset
(multiplied by 512) where the read or write is to occur. This field is
unused and set to 0 for commands other than read or write."
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Message-Id: <20220811083632.77525-2-sgarzare@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Implement suspend operation for vdpa_sim devices, so vhost-vdpa will
offer that backend feature and userspace can effectively suspend the
device.
This is a must before get virtqueue indexes (base) for live migration,
since the device could modify them after userland gets them. There are
individual ways to perform that action for some devices
(VHOST_NET_SET_BACKEND, VHOST_VSOCK_SET_RUNNING, ...) but there was no
way to perform it for any vhost device (and, in particular, vhost-vdpa).
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Message-Id: <20220810171512.2343333-5-eperezma@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This commit fixes spars warnings: cast to restricted __le16
in function vdpa_dev_net_config_fill() and
vdpa_fill_stats_rec()
Signed-off-by: Zhu Lingshan <lingshan.zhu@intel.com>
Reviewed-by: Parav Pandit <parav@nvidia.com>
Message-Id: <20220722115309.82746-7-lingshan.zhu@intel.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Users may want to query the config space of a vDPA device,
to choose a appropriate one for a certain guest. This means the
users need to read the config space before FEATURES_OK, and
the existence of config space contents does not depend on
FEATURES_OK.
The spec says:
The device MUST allow reading of any device-specific configuration
field before FEATURES_OK is set by the driver. This includes
fields which are conditional on feature bits, as long as those
feature bits are offered by the device.
Signed-off-by: Zhu Lingshan <lingshan.zhu@intel.com>
Message-Id: <20220722115309.82746-5-lingshan.zhu@intel.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Adapting to current netlink interfaces, this commit allows userspace
to query feature bits and MQ capability of a management device.
Currently both the vDPA device and the management device are the VF itself,
thus this ifcvf should initialize the virtio capabilities in probe() before
setting up the struct vdpa_mgmt_dev.
Signed-off-by: Zhu Lingshan <lingshan.zhu@intel.com>
Message-Id: <20220722115309.82746-3-lingshan.zhu@intel.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Drivers must not access a BAR outside the capability length,
and for a virtio device, ifcvf driver should not report any non-standard
capability contents to the upper layers.
Function ifcvf_get_config_size() is introduced here to return a safe value
of the device config capability size.
Signed-off-by: Zhu Lingshan <lingshan.zhu@intel.com>
Message-Id: <20220722115309.82746-2-lingshan.zhu@intel.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Partition virtqueues to two different address spaces: one for control
virtqueue which is implemented in software, and one for data virtqueues.
Based-on: <20220526124338.36247-1-eperezma@redhat.com>
Signed-off-by: Eli Cohen <elic@nvidia.com>
Message-Id: <20220714113927.85729-3-elic@nvidia.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Implement the suspend callback allowing to suspend the virtqueues so
they stop processing descriptors. This is required to allow to query a
consistent state of the virtqueue while live migration is taking place.
Signed-off-by: Eli Cohen <elic@nvidia.com>
Message-Id: <20220714113927.85729-2-elic@nvidia.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This introduces a new ioctl: VDUSE_IOTLB_GET_INFO to
support querying some information of IOVA regions.
Now it can be used to query whether the IOVA region
supports userspace memory registration.
Signed-off-by: Xie Yongji <xieyongji@bytedance.com>
Message-Id: <20220803045523.23851-6-xieyongji@bytedance.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Introduce two ioctls: VDUSE_IOTLB_REG_UMEM and
VDUSE_IOTLB_DEREG_UMEM to support registering
and de-registering userspace memory for IOVA
regions.
Now it only supports registering userspace memory
for bounce buffer region in virtio-vdpa case.
Signed-off-by: Xie Yongji <xieyongji@bytedance.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20220803045523.23851-5-xieyongji@bytedance.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Introduce two APIs: vduse_domain_add_user_bounce_pages()
and vduse_domain_remove_user_bounce_pages() to support
adding and removing userspace pages for bounce buffers.
During adding and removing, the DMA data would be copied
from the kernel bounce pages to the userspace bounce pages
and back.
Signed-off-by: Xie Yongji <xieyongji@bytedance.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20220803045523.23851-4-xieyongji@bytedance.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
kmap_atomic() is being deprecated in favor of kmap_local_page().
The use of kmap_atomic() in do_bounce() is all thread local therefore
kmap_local_page() is a sufficient replacement.
Convert to kmap_local_page() but, instead of open coding it,
use the helpers memcpy_to_page() and memcpy_from_page().
Signed-off-by: Xie Yongji <xieyongji@bytedance.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Muchun Song <songmuchun@bytedance.com>
Message-Id: <20220803045523.23851-3-xieyongji@bytedance.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Now we use domain->iotlb_lock to protect two different
variables: domain->bounce_maps->bounce_page and
domain->iotlb. But for domain->bounce_maps->bounce_page,
we actually don't need any synchronization between
vduse_domain_get_bounce_page() and vduse_domain_free_bounce_pages()
since vduse_domain_get_bounce_page() will only be called in
page fault handler and vduse_domain_free_bounce_pages() will
be called during file release.
So let's remove the unnecessary spin lock protection in
vduse_domain_get_bounce_page(). Then the usage of
domain->iotlb_lock could be more clear: the lock will be
only used to protect the domain->iotlb.
Signed-off-by: Xie Yongji <xieyongji@bytedance.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20220803045523.23851-2-xieyongji@bytedance.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The assignment to pointer cfg is duplicated, the second assignment
is redundant and can be removed.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Message-Id: <20220704190456.593464-1-colin.i.king@gmail.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
There is a typo(does't) in comments.
It maybe 'doesn't' instead of 'does't'.
Signed-off-by: Zhang Jiaming <jiaming@nfschina.com>
Message-Id: <20220704024104.15535-1-jiaming@nfschina.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Using eth_broadcast_addr() to assign broadcast address instead
of memset().
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Xu Qiang <xuqiang36@huawei.com>
Message-Id: <20220704021405.64545-1-xuqiang36@huawei.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Commit bda324fd03 ("vdpasim: control virtqueue support") changed
the allocation of iotlbs calling vhost_iotlb_init() for each address
space, instead of vhost_iotlb_alloc().
With this change we forgot to use the limit we had introduced with
the `max_iotlb_entries` module parameter.
Fixes: bda324fd03 ("vdpasim: control virtqueue support")
Cc: gautam.dawar@xilinx.com
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Message-Id: <20220621151208.189959-1-sgarzare@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Eugenio Pérez <eperezma@redhat.com>
Commit bda324fd03 ("vdpasim: control virtqueue support") added two
new fields (nas, ngroups) to vdpasim_dev_attr, but we forgot to
initialize them for vdpa_sim_blk.
When creating a new vdpa_sim_blk device this causes the kernel
to panic in this way:
$ vdpa dev add mgmtdev vdpasim_blk name blk0
BUG: kernel NULL pointer dereference, address: 0000000000000030
...
RIP: 0010:vhost_iotlb_add_range_ctx+0x41/0x220 [vhost_iotlb]
...
Call Trace:
<TASK>
vhost_iotlb_add_range+0x11/0x800 [vhost_iotlb]
vdpasim_map_range+0x91/0xd0 [vdpa_sim]
vdpasim_alloc_coherent+0x56/0x90 [vdpa_sim]
...
This happens because vdpasim->iommu[0] is not initialized when
dev_attr.nas is 0.
Let's fix this issue by initializing both (nas, ngroups) to 1 for
vdpa_sim_blk.
Fixes: bda324fd03 ("vdpasim: control virtqueue support")
Cc: gautam.dawar@xilinx.com
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Message-Id: <20220621151323.190431-1-sgarzare@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Eugenio Pérez <eperezma@redhat.com>
Call vringh_complete_iotlb() even when we encounter a serious error
that prevents us from writing the status in the "in" header
(e.g. the header length is incorrect, etc.).
The guest is misbehaving, so maybe the ring is in a bad state, but
let's avoid making things worse.
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Message-Id: <20220630153221.83371-4-sgarzare@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Limit the number of requests (4 per queue as for vdpa_sim_net) handled
in a batch to prevent the worker from using the CPU for too long.
Suggested-by: Eugenio Pérez <eperezma@redhat.com>
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Message-Id: <20220630153221.83371-3-sgarzare@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Use dev_dbg() instead of dev_err()/dev_warn() to avoid flooding the
host with prints, when the guest driver is misbehaving.
In this way, prints can be dynamically enabled when the vDPA block
simulator is used to validate a driver.
Suggested-by: Jason Wang <jasowang@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Message-Id: <20220630153221.83371-2-sgarzare@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
vduse devices are not backed by any real devices such as PCI. Hence it
doesn't have any parent device linked to it.
Kernel driver model in [1] suggests to avoid an empty device
release callback.
Hence tie the mgmtdevice object's life cycle to an allocate dummy struct
device instead of static one.
[1] https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/Documentation/core-api/kobject.rst?h=v5.18-rc7#n284
Signed-off-by: Parav Pandit <parav@nvidia.com>
Message-Id: <20220613195223.473966-1-parav@nvidia.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Xie Yongji <xieyongji@bytedance.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Currently, CVQ vringh is initialized inside setup_virtqueues() which is
called every time a memory update is done. This is undesirable since it
resets all the context of the vring, including the available and used
indices.
Move the initialization to mlx5_vdpa_set_status() when
VIRTIO_CONFIG_S_DRIVER_OK is set.
Signed-off-by: Eli Cohen <elic@nvidia.com>
Message-Id: <20220613075958.511064-2-elic@nvidia.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Acked-by: Eugenio Pérez <eperezma@redhat.com>
The control VQ specific information is stored in the dedicated struct
mlx5_control_vq. When the callback is updated through
mlx5_vdpa_set_vq_cb(), make sure to update the control VQ struct.
Fixes: 5262912ef3 ("vdpa/mlx5: Add support for control VQ and MAC setting")
Signed-off-by: Eli Cohen <elic@nvidia.com>
Message-Id: <20220613075958.511064-1-elic@nvidia.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com)
These lines were supposed to be indented.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Message-Id: <Yp71IYMP+QfuCJ8t@kili>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Eli Cohen <elic@nvidia.com>
Acked-by: Si-Wei Liu <si-wei.liu@oracle.com>
Return success if we were able to delete a vlan. The current code
always returns failure.
Fixes: baf2ad3f6a ("vdpa/mlx5: Add RX MAC VLAN filter support")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Message-Id: <Yp709f1g9NcMBCHg@kili>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Eli Cohen <elic@nvidia.com>
Acked-by: Si-Wei Liu <si-wei.liu@oracle.com>
Delete the redundant word 'is'.
Signed-off-by: Xiang wangx <wangxiang@cdjrlc.com>
Message-Id: <20220604143858.16073-1-wangxiang@cdjrlc.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Here is the set of driver core changes for 5.19-rc1.
Note, I'm not really happy with this pull request as-is, see below for
details, but overall this is all good for everything but a small set of
systems, which we have a fix for already.
Lots of tiny driver core changes and cleanups happened this cycle,
but the two major things were:
- firmware_loader reorganization and additions including the
ability to have XZ compressed firmware images and the ability
for userspace to initiate the firmware load when it needs to,
instead of being always initiated by the kernel. FPGA devices
specifically want this ability to have their firmware changed
over the lifetime of the system boot, and this allows them to
work without having to come up with yet-another-custom-uapi
interface for loading firmware for them.
- physical location support added to sysfs so that devices that
know this information, can tell userspace where they are
located in a common way. Some ACPI devices already support
this today, and more bus types should support this in the
future.
Smaller changes included:
- driver_override api cleanups and fixes
- error path cleanups and fixes
- get_abi script fixes
- deferred probe timeout changes.
It's that last change that I'm the most worried about. It has been
reported to cause boot problems for a number of systems, and I have a
tested patch series that resolves this issue. But I didn't get it
merged into my tree before 5.18-final came out, so it has not gotten any
linux-next testing.
I'll send the fixup patches (there are 2) as a follow-on series to this
pull request if you want to take them directly, _OR_ I can just revert
the probe timeout changes and they can wait for the next -rc1 merge
cycle. Given that the fixes are tested, and pretty simple, I'm leaning
toward that choice. Sorry this all came at the end of the merge window,
I should have resolved this all 2 weeks ago, that's my fault as it was
in the middle of some travel for me.
All have been tested in linux-next for weeks, with no reported issues
other than the above-mentioned boot time outs.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCYpnv/A8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+yk/fACgvmenbo5HipqyHnOmTQlT50xQ9EYAn2eTq6ai
GkjLXBGNWOPBa5cU52qf
=yEi/
-----END PGP SIGNATURE-----
Merge tag 'driver-core-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core updates from Greg KH:
"Here is the set of driver core changes for 5.19-rc1.
Lots of tiny driver core changes and cleanups happened this cycle, but
the two major things are:
- firmware_loader reorganization and additions including the ability
to have XZ compressed firmware images and the ability for userspace
to initiate the firmware load when it needs to, instead of being
always initiated by the kernel. FPGA devices specifically want this
ability to have their firmware changed over the lifetime of the
system boot, and this allows them to work without having to come up
with yet-another-custom-uapi interface for loading firmware for
them.
- physical location support added to sysfs so that devices that know
this information, can tell userspace where they are located in a
common way. Some ACPI devices already support this today, and more
bus types should support this in the future.
Smaller changes include:
- driver_override api cleanups and fixes
- error path cleanups and fixes
- get_abi script fixes
- deferred probe timeout changes.
It's that last change that I'm the most worried about. It has been
reported to cause boot problems for a number of systems, and I have a
tested patch series that resolves this issue. But I didn't get it
merged into my tree before 5.18-final came out, so it has not gotten
any linux-next testing.
I'll send the fixup patches (there are 2) as a follow-on series to this
pull request.
All have been tested in linux-next for weeks, with no reported issues
other than the above-mentioned boot time-outs"
* tag 'driver-core-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (55 commits)
driver core: fix deadlock in __device_attach
kernfs: Separate kernfs_pr_cont_buf and rename_lock.
topology: Remove unused cpu_cluster_mask()
driver core: Extend deferred probe timeout on driver registration
MAINTAINERS: add Russ Weight as a firmware loader maintainer
driver: base: fix UAF when driver_attach failed
test_firmware: fix end of loop test in upload_read_show()
driver core: location: Add "back" as a possible output for panel
driver core: location: Free struct acpi_pld_info *pld
driver core: Add "*" wildcard support to driver_async_probe cmdline param
driver core: location: Check for allocations failure
arch_topology: Trace the update thermal pressure
kernfs: Rename kernfs_put_open_node to kernfs_unlink_open_file.
export: fix string handling of namespace in EXPORT_SYMBOL_NS
rpmsg: use local 'dev' variable
rpmsg: Fix calling device_lock() on non-initialized device
firmware_loader: describe 'module' parameter of firmware_upload_register()
firmware_loader: Move definitions from sysfs_upload.h to sysfs.h
firmware_loader: Fix configs for sysfs split
selftests: firmware: Add firmware upload selftests
...
We should set the pci driver data in probe instead of the vdpa device
adding callback. Otherwise if no vDPA device is created we will lose
the pointer to the management device.
Fixes: 6b5df347c6 ("vDPA/ifcvf: implement management netlink framework for ifcvf")
Tested-by: Zheyu Ma <zheyuma97@gmail.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20220524055557.1938-1-jasowang@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Support HW offloaded filtering of MAC/VLAN packets.
To allow that, we add a handler to handle VLAN configurations coming
through the control VQ. Two operations are supported.
1. Adding VLAN - in this case, an entry will be added to the RX flow
table that will allow the combination of the MAC/VLAN to be
forwarded to the TIR.
2. Removing VLAN - will remove the entry from the flow table,
effectively blocking such packets from going through.
Currently the control VQ does not propagate changes to the MAC of the
VLAN device so we always use the MAC of the parent device.
Examples:
1. Create vlan device:
$ ip link add link ens1 name ens1.8 type vlan id 8
Signed-off-by: Eli Cohen <elic@nvidia.com>
Message-Id: <20220411122942.225717-4-elic@nvidia.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
The flow counter has been introduced in early versions of the driver to
aid in debugging. It is no longer needed and can harm performance.
Remove it.
Signed-off-by: Eli Cohen <elic@nvidia.com>
Message-Id: <20220411122942.225717-2-elic@nvidia.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The > comparison needs to be >= to prevent an out of bounds access
of the vdpasim->iommu[] array. The vdpasim->iommu[] is allocated in
vdpasim_create() and it has vdpasim->dev_attr.nas elements.
Fixes: 87e5afeac247 ("vdpasim: control virtqueue support")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Message-Id: <YotGQU1q224RKZR8@kili>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Code must be resilient to enable a queue many times.
At the moment the queue is resetting so it's definitely not the expected
behavior.
v2: set vq->ready = 0 at disable.
Fixes: 2c53d0f64c ("vdpasim: vDPA device simulator")
Cc: stable@vger.kernel.org
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Message-Id: <20220519145919.772896-1-eperezma@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Static checkers are not informed that config_vector is controlled
by vf->msix_vector_status, which can only be
MSIX_VECTOR_SHARED_VQ_AND_CONFIG, MSIX_VECTOR_SHARED_VQ_AND_CONFIG
and MSIX_VECTOR_DEV_SHARED.
This commit uses an "if...elseif...else" code block to tell the
checkers that it is a complete set, and config_vector can be
initialized anyway
Signed-off-by: Zhu Lingshan <lingshan.zhu@intel.com>
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Message-Id: <20220424072806.1083189-1-lingshan.zhu@intel.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
this patch is to add the support for vdpa tool in vp_vdpa
here is the example steps
modprobe vp_vdpa
modprobe vhost_vdpa
echo 0000:00:06.0>/sys/bus/pci/drivers/virtio-pci/unbind
echo 1af4 1041 > /sys/bus/pci/drivers/vp-vdpa/new_id
vdpa dev add name vdpa1 mgmtdev pci/0000:00:06.0
Signed-off-by: Cindy Lu <lulu@redhat.com>
Message-Id: <20220429091030.547434-1-lulu@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
This patch introduces the control virtqueue support for vDPA
simulator. This is a requirement for supporting advanced features like
multiqueue.
A requirement for control virtqueue is to isolate its memory access
from the rx/tx virtqueues. This is because when using vDPA device
for VM, the control virqueue is not directly assigned to VM. Userspace
(Qemu) will present a shadow control virtqueue to control for
recording the device states.
The isolation is done via the virtqueue groups and ASID support in
vDPA through vhost-vdpa. The simulator is extended to have:
1) three virtqueues: RXVQ, TXVQ and CVQ (control virtqueue)
2) two virtqueue groups: group 0 contains RXVQ and TXVQ; group 1
contains CVQ
3) two address spaces and the simulator simply implements the address
spaces by mapping it 1:1 to IOTLB.
For the VM use cases, userspace(Qemu) may set AS 0 to group 0 and AS 1
to group 1. So we have:
1) The IOTLB for virtqueue group 0 contains the mappings of guest, so
RX and TX can be assigned to guest directly.
2) The IOTLB for virtqueue group 1 contains the mappings of CVQ which
is the buffers that allocated and managed by VMM only. So CVQ of
vhost-vdpa is visible to VMM only. And Guest can not access the CVQ
of vhost-vdpa.
For the other use cases, since AS 0 is associated to all virtqueue
groups by default. All virtqueues share the same mapping by default.
To demonstrate the function, VIRITO_NET_F_CTRL_MACADDR is
implemented in the simulator for the driver to set mac address.
Signed-off-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Gautam Dawar <gdawar@xilinx.com>
Message-Id: <20220330180436.24644-20-gdawar@xilinx.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This patch implements a simple unicast filter for vDPA simulator.
Signed-off-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Gautam Dawar <gdawar@xilinx.com>
Message-Id: <20220330180436.24644-19-gdawar@xilinx.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Wrap up common buffer completion logic in to vdpasim_net_complete
Signed-off-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Gautam Dawar <gdawar@xilinx.com>
Message-Id: <20220330180436.24644-18-gdawar@xilinx.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
We've already reported maximum mtu via config space, so let's
advertise the feature.
Signed-off-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Gautam Dawar <gdawar@xilinx.com>
Message-Id: <20220330180436.24644-17-gdawar@xilinx.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This patches introduces the multiple address spaces support for vDPA
device. This idea is to identify a specific address space via an
dedicated identifier - ASID.
During vDPA device allocation, vDPA device driver needs to report the
number of address spaces supported by the device then the DMA mapping
ops of the vDPA device needs to be extended to support ASID.
This helps to isolate the environments for the virtqueue that will not
be assigned directly. E.g in the case of virtio-net, the control
virtqueue will not be assigned directly to guest.
As a start, simply claim 1 virtqueue groups and 1 address spaces for
all vDPA devices. And vhost-vDPA will simply reject the device with
more than 1 virtqueue groups or address spaces.
Signed-off-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Gautam Dawar <gdawar@xilinx.com>
Message-Id: <20220330180436.24644-7-gdawar@xilinx.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This patch introduces virtqueue groups to vDPA device. The virtqueue
group is the minimal set of virtqueues that must share an address
space. And the address space identifier could only be attached to
a specific virtqueue group.
Signed-off-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Gautam Dawar <gdawar@xilinx.com>
Message-Id: <20220330180436.24644-6-gdawar@xilinx.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reading statistics could be done intensively and by several processes
concurrently. Reader's lock is sufficient in this case.
Change reslock from mutex to a rwsem.
Suggested-by: Si-Wei Liu <si-wei.liu@oracle.com>
Signed-off-by: Eli Cohen <elic@nvidia.com>
Message-Id: <20220518133804.1075129-7-elic@nvidia.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Implement the get_vq_stats calback of vdpa_config_ops to return the
statistics for a virtqueue.
The statistics are provided as vendor specific statistics where the
driver provides a pair of attribute name and attribute value.
Currently supported are received descriptors and completed descriptors.
Signed-off-by: Eli Cohen <elic@nvidia.com>
Message-Id: <20220518133804.1075129-6-elic@nvidia.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Replace cf_mutex with rw_semaphore to reflect the fact that some calls
could be called concurrently but can suffice with read lock.
Suggested-by: Si-Wei Liu <si-wei.liu@oracle.com>
Signed-off-by: Eli Cohen <elic@nvidia.com>
Message-Id: <20220518133804.1075129-5-elic@nvidia.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Use rw_semaphore instead of mutex to control access to vdpa devices.
This can be especially beneficial in case processes poll on statistics
information.
Suggested-by: Si-Wei Liu <si-wei.liu@oracle.com>
Reviewed-by: Si-Wei Liu <si-wei.liu@oracle.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Eli Cohen <elic@nvidia.com>
Message-Id: <20220518133804.1075129-4-elic@nvidia.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
