IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
Remove the redundant check of (tg3_asic_rev(tp) == ASIC_REV_5705) after
it is checked to be true.
Signed-off-by: Jean Sacren <sakiwit@gmail.com>
Reviewed-by: Michael Chan <michael.chan@broadcom.com>
Link: https://lore.kernel.org/r/20211008063147.1421-1-sakiwit@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This patch fixes below compliation error in case CONFIG_QED_SRIOV not
defined.
drivers/net/ethernet/qlogic/qed/qed_dev.c: In function
‘qed_fw_err_handler’:
drivers/net/ethernet/qlogic/qed/qed_dev.c:2390:3: error: implicit
declaration of function ‘qed_sriov_vfpf_malicious’; did you mean
‘qed_iov_vf_task’? [-Werror=implicit-function-declaration]
qed_sriov_vfpf_malicious(p_hwfn, &data->err_data);
^~~~~~~~~~~~~~~~~~~~~~~~
qed_iov_vf_task
drivers/net/ethernet/qlogic/qed/qed_dev.c: In function
‘qed_common_eqe_event’:
drivers/net/ethernet/qlogic/qed/qed_dev.c:2410:10: error: implicit
declaration of function ‘qed_sriov_eqe_event’; did you mean
‘qed_common_eqe_event’? [-Werror=implicit-function-declaration]
return qed_sriov_eqe_event(p_hwfn, opcode, echo, data,
^~~~~~~~~~~~~~~~~~~
qed_common_eqe_event
Fixes: fe40a830dcde ("qed: Update qed_hsi.h for fw 8.59.1.0")
Reported-by: Linux Kernel Functional Testing <lkft@linaro.org>
Cc: Naresh Kamboju <naresh.kamboju@linaro.org>
Signed-off-by: Ariel Elior <aelior@marvell.com>
Signed-off-by: Shai Malin <smalin@marvell.com>
Signed-off-by: Omkar Kulkarni <okulkarni@marvell.com>
Signed-off-by: Prabhakar Kushwaha <pkushwaha@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Micrel KSZ9131 PHY LED behavior is not correct when configured in
Individual Mode, LED1 (Activity LED) is in the ON state when there is
no-link.
Workaround this by setting bit 9 of register 0x1e after verifying that
the LED configuration is Individual Mode.
This issue is described in KSZ9131RNX Silicon Errata DS80000693B [*]
and according to that it will not be corrected in a future silicon
revision.
[*] https://ww1.microchip.com/downloads/en/DeviceDoc/KSZ9131RNX-Silicon-Errata-and-Data-Sheet-Clarification-80000863B.pdf
Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Reviewed-by: Philippe Schenker <philippe.schenker@toradex.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Antoine Tenart says:
====================
net: introduce a function to check if a netdev name is in use
This was initially part of an RFC series[1] but has value on its own;
hence the standalone report. (It will also help in not having a series
too large).
From patch 1:
"""
__dev_get_by_name is currently used to either retrieve a net device
reference using its name or to check if a name is already used by a
registered net device (per ns). In the later case there is no need to
return a reference to a net device.
Introduce a new helper, netdev_name_in_use, to check if a name is
currently used by a registered net device without leaking a reference
the corresponding net device. This helper uses netdev_name_node_lookup
instead of __dev_get_by_name as we don't need the extra logic retrieving
a reference to the corresponding net device.
"""
Two uses[2] of __dev_get_by_name weren't converted to this new function,
as they are really looking for a net device, not only checking if a net
device name is in use. While checking one or the other currently has
the same result, that might change if the initial RFC series moves
forward. I'll convert them later depending on the outcome of the initial
series.
Thanks,
Antoine
[1] https://lore.kernel.org/all/20210928125500.167943-1-atenart@kernel.org/
[2] drivers/net/Space.c:130 & drivers/nvme/host/tcp.c:2550
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
A new helper to detect if a net device name is in use was added. Use it
here as the return reference from __dev_get_by_name was discarded.
Signed-off-by: Antoine Tenart <atenart@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
A new helper to detect if a net device name is in use was added. Use it
here as the return reference from __dev_get_by_name was discarded.
Signed-off-by: Antoine Tenart <atenart@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
__dev_get_by_name is currently used to either retrieve a net device
reference using its name or to check if a name is already used by a
registered net device (per ns). In the later case there is no need to
return a reference to a net device.
Introduce a new helper, netdev_name_in_use, to check if a name is
currently used by a registered net device without leaking a reference
the corresponding net device. This helper uses netdev_name_node_lookup
instead of __dev_get_by_name as we don't need the extra logic retrieving
a reference to the corresponding net device.
Signed-off-by: Antoine Tenart <atenart@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ioana Ciornei says:
====================
net: enetc: add support for software TSO
This series adds support for driver level TSO in the enetc driver.
Ever since the ENETC MDIO erratum workaround is in place, the Tx path is
incurring a penalty (enetc_lock_mdio/enetc_unlock_mdio) for each skb to
be sent out. On top of this, ENETC does not support Tx checksum
offloading. This means that software TSO would help performance just by
the fact that one single mdio lock/unlock sequence would cover multiple
packets sent. On the other hand, checksum needs to be computed in
software since the controller cannot handle it.
This is why, beside using the usual tso_build_hdr()/tso_build_data()
this specific implementation also has to compute the checksum, both IP
and L4, for each resulted segment.
Even with that, the performance improvement of a TCP flow running on a
single A72@1.3GHz of the LS1028A SoC (2.5Gbit/s port) is the following:
before: 1.63 Gbits/sec
after: 2.34 Gbits/sec
Changes in v2:
- declare NETIF_F_HW_CSUM instead of NETIF_F_IP_CSUM in 1/2
- add support for TSO over IPv6 (NETIF_F_TSO6 and csum compute) in 2/2
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch adds support for driver level TSO in the enetc driver using
the TSO API.
Beside using the usual tso_build_hdr(), tso_build_data() this specific
implementation also has to compute the checksum, both IP and L4, for
each resulted segment. This is because the ENETC controller does not
support Tx checksum offload which is needed in order to take advantage
of TSO.
With the workaround for the ENETC MDIO erratum in place the Tx path of
the driver is forced to lock/unlock for each skb sent. This is why, even
though we are computing the checksum by hand we see the following
improvement in TCP termination on the LS1028A SoC, on a single A72 core
running at 1.3GHz:
before: 1.63 Gbits/sec
after: 2.34 Gbits/sec
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Reviewed-by: Claudiu Manoil <claudiu.manoil@nxp.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This is just a preparation patch for software TSO in the enetc driver.
Unfortunately, ENETC does not support Tx checksum offload which would
normally render TSO, even software, impossible.
Declare NETIF_F_HW_CSUM as part of the feature set and do it at driver
level using skb_csum_hwoffload_help() so that we can move forward and
also add support for TSO in the next patch.
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ido Schimmel says:
====================
selftests: forwarding: Add ip6gre tests
This patchset adds forwarding selftests for ip6gre. The tests can be run
with veth pairs or with physical loopbacks.
Patch #1 adds a new config option to determine if 'skip_sw' / 'skip_hw'
flags are used when installing tc filters. By default, it is not set
which means the flags are not used. 'skip_sw' is useful to ensure
traffic is forwarded by the hardware data path.
Patch #2 adds a new helper function.
Patches #3-#4 add the forwarding selftests.
Patch #5 adds a mlxsw-specific selftest to validate correct behavior of
the 'decap_error' trap with IPv6 underlay.
Patches #6-#8 align the corresponding IPv4 underlay test to the IPv6
one.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
As part of adding same test for GRE tunnel with IPv6 underlay, missing
bytes for key were found.
mausezahn does not fill zeros between two colons, so send them
explicitly. For example, use "00:00:00:E9:" instead of ":E9:"
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
As part of adding same test for GRE tunnel with IPv6 underlay, an
optional improvement was found - call ipip_payload_get from
ecn_payload_get, so do not duplicate the code which creates the payload.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
As part of adding same test for GRE tunnel with IPv6 underlay, wrong
alignments were found, fix them.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
IPv6 underlay support was added, add test to check that "decap_error" trap
is triggered under the right conditions and that devlink counters increase.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add tests that check IPv6-in-IPv6, IPv4-in-IPv6 and MTU change of GRE
tunnel. The tests use hierarchical model - the tunnel is bound to a device
in a different VRF.
These tests can be run with TC_FLAG=skip_sw, so then they will verify
that packets go through hardware as part of enacp and decap phases.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add tests that check IPv6-in-IPv6, IPv4-in-IPv6 and MTU change of GRE
tunnel. The tests use flat model - overlay and underlay share the same VRF.
These tests can be run with TC_FLAG=skip_sw, so then they will verify
that packets go through hardware as part of enacp and decap phases.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add function that checks that at least X packets hit the tc rule.
There are cases that it is not possible to catch only the interesting
packets, so then, it is possible to send many packets and verify that at
least this amount of packets hit the rule.
This function will be used in the next patch for general tc rule that
can be used to test both software and hardware.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add TC_FLAG value to tests topology.
This flag supposed to be skip_sw/skip_hw which means do not filter by
software/hardware.
This can be useful for adding tests to forwarding directory, and be able
to verify that packets go through the hardware.
When the flag is not set or set to 'skip_hw', tests can still be executed
with veth pairs.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Reuse the timeval compat code from core/sock to handle 32-bit and
64-bit timeval structures. Also introduce a new socket option define
to allow using y2038 safe timeval under 32-bit.
The existing behavior of sock_set_timeout and vsock's timeout setter
differ when the time value is out of bounds. vsocks current behavior
is retained at the expense of not being able to share the full
implementation.
This allows the LTP test vsock01 to pass under 32-bit compat mode.
Fixes: fe0c72f3db11 ("socket: move compat timeout handling into sock.c")
Signed-off-by: Richard Palethorpe <rpalethorpe@suse.com>
Cc: Richard Palethorpe <rpalethorpe@richiejp.com>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
In preparation for sharing the implementation of sock_get_timeout.
Signed-off-by: Richard Palethorpe <rpalethorpe@suse.com>
Cc: Richard Palethorpe <rpalethorpe@richiejp.com>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Stephen reported that ath11k was failing to build on m68k and xtensa:
In file included from <command-line>:0:0:
In function 'ath11k_peer_assoc_h_smps',
inlined from 'ath11k_peer_assoc_prepare' at drivers/net/wireless/ath/ath11k/mac.c:2362:2:
include/linux/compiler_types.h:317:38: error: call to '__compiletime_assert_650' declared with attribute error: FIELD_GET: type of reg too small for mask
_compiletime_assert(condition, msg, __compiletime_assert_, __COUNTER__)
^
include/linux/compiler_types.h:298:4: note: in definition of macro '__compiletime_assert'
prefix ## suffix(); \
^
include/linux/compiler_types.h:317:2: note: in expansion of macro '_compiletime_assert'
_compiletime_assert(condition, msg, __compiletime_assert_, __COUNTER__)
^
include/linux/build_bug.h:39:37: note: in expansion of macro 'compiletime_assert'
#define BUILD_BUG_ON_MSG(cond, msg) compiletime_assert(!(cond), msg)
^
include/linux/bitfield.h:52:3: note: in expansion of macro 'BUILD_BUG_ON_MSG'
BUILD_BUG_ON_MSG((_mask) > (typeof(_reg))~0ull, \
^
include/linux/bitfield.h:108:3: note: in expansion of macro '__BF_FIELD_CHECK'
__BF_FIELD_CHECK(_mask, _reg, 0U, "FIELD_GET: "); \
^
drivers/net/wireless/ath/ath11k/mac.c:2079:10: note: in expansion of macro 'FIELD_GET'
smps = FIELD_GET(IEEE80211_HE_6GHZ_CAP_SM_PS,
Fix the issue by using le16_get_bits() to specify the size explicitly.
Fixes: 6f4d70308e5e ("ath11k: support SMPS configuration for 6 GHz")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Tested-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Due to deadlocks in the networking subsystem spotted 12 years ago[1],
a workaround was put in place[2] to avoid taking the rtnl lock when it
was not available and restarting the syscall (back to VFS, letting
userspace spin). The following construction is found a lot in the net
sysfs and sysctl code:
if (!rtnl_trylock())
return restart_syscall();
This can be problematic when multiple userspace threads use such
interfaces in a short period, making them to spin a lot. This happens
for example when adding and moving virtual interfaces: userspace
programs listening on events, such as systemd-udevd and NetworkManager,
do trigger actions reading files in sysfs. It gets worse when a lot of
virtual interfaces are created concurrently, say when creating
containers at boot time.
Returning early without hitting the above pattern when the syscall will
fail eventually does make things better. While it is not a fix for the
issue, it does ease things.
[1] https://lore.kernel.org/netdev/49A4D5D5.5090602@trash.net/https://lore.kernel.org/netdev/m14oyhis31.fsf@fess.ebiederm.org/
and https://lore.kernel.org/netdev/20090226084924.16cb3e08@nehalam/
[2] Rightfully, those deadlocks are *hard* to solve.
Signed-off-by: Antoine Tenart <atenart@kernel.org>
Reviewed-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
PHYLIB device drivers must match by either numerical PHY ID or by their
.match_phy_device method. Matching by DT is not permitted.
Link: https://lore.kernel.org/r/2b1dc053-8c9a-e3e4-b450-eecdfca3fe16@gmail.com
Tested-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
On the MDIO bus, we have PHYLIB devices and drivers, and we have non-
PHYLIB devices and drivers. PHYLIB devices are MDIO devices that are
wrapped with a struct phy_device.
Trying to bind a MDIO device with a PHYLIB driver results in out-of-
bounds accesses as we attempt to access struct phy_device members. So,
let's prevent this by ensuring that the type of the MDIO device
(indicated by the MDIO_DEVICE_FLAG_PHY flag) matches the type of the
MDIO driver (indicated by the MDIO_DEVICE_IS_PHY flag.)
Link: https://lore.kernel.org/r/2b1dc053-8c9a-e3e4-b450-eecdfca3fe16@gmail.com
Tested-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
leaf classes of ETS qdiscs are served in strict priority or deficit round
robin (DRR), depending on the value of 'nstrict'. Since this value can be
changed while traffic is running, we need to be sure that the active list
of DRR classes can be updated at any time, so:
1) call INIT_LIST_HEAD(&alist) on all leaf classes in .init(), before the
first packet hits any of them.
2) ensure that 'alist' is not overwritten with zeros when a leaf class is
no more strict priority nor DRR (i.e. array elements beyond 'nbands').
Link: https://lore.kernel.org/netdev/YS%2FoZ+f0Nr8eQkzH@dcaratti.users.ipa.redhat.com
Suggested-by: Cong Wang <cong.wang@bytedance.com>
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Eliminate the following coccicheck warning:
./drivers/net/dsa/rtl8366rb.c:1348:2-3: Unneeded semicolon
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jakub Kicinski says:
====================
net: add a helpers for loading netdev->dev_addr from platform
Similarly to recently added device_get_ethdev_address()
and of_get_ethdev_address() create a helper for drivers
loading mac addr from platform data.
nvmem_get_mac_address() does not have driver callers
so instead of adding a helper there unexport it.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Use the new platform_get_ethdev_address() helper for the cases
where dev->dev_addr is passed in directly as the destination.
@@
expression dev, net;
@@
- eth_platform_get_mac_address(dev, net->dev_addr)
+ platform_get_ethdev_address(dev, net)
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Commit 406f42fa0d3c ("net-next: When a bond have a massive amount
of VLANs...") introduced a rbtree for faster Ethernet address look
up. To maintain netdev->dev_addr in this tree we need to make all
the writes to it got through appropriate helpers.
There is a handful of drivers which pass netdev->dev_addr as
the destination buffer to eth_platform_get_mac_address().
Add a helper which takes a dev pointer instead, so it can call
an appropriate helper.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
nvmem_get_mac_address() is only called from of_net.c
we don't need the export.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Tony Nguyen says:
====================
100GbE Intel Wired LAN Driver Updates 2021-10-07
Michal Swiatkowski says:
The following patch series introduces basic switchdev model
support in ice driver. Implement the following blocks of
switchdev framework:
- VF port representors creation
- control plane VSI definition
- exception path (a. k. a. "slow-path") - to allow a virtual
switch or linux bridge to receive any packet that doesn't match
any hw filter
- link state management of virtual ports
- query virtual port statistics
Hardware offload support in switchdev mode is out of scope of
this patchset. Devlink interface is used to toggle between
switchdev and legacy (the default) modes of the driver.
---
Note: This series includes the use enum ice_status, however, we have
patches in our queue to remove it from the driver [1]. We are working
through the patches that precede the removal series.
[1] https://patchwork.ozlabs.org/project/intel-wired-lan/list/?series=265957
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
This is a larger than normal update for Arm SoC specific code, most
of it in device trees, but also drivers and the omap and at91/sama7
platforms:
- There are four new entries to the MAINTAINERS file: Sven Peter and
Alyssa Rosenzweig for Apple M1, Romain Perier for Mstar/sigmastar,
and Vignesh Raghavendra for TI K3
- Build fixes to address randconfig warnings in sharpsl, dove, omap1,
and qcom platforms as well as the scmi and op-tee subsystems
- Regression fixes for missing CONFIG_FB and other options for several
defconfigs
- Several bug fixes for the newly added Microchip SAMA7 platform,
mostly regarding power management
- Missing SMP barriers to protect accesses to SCMI virtio device
- Regression fixes for TI OMAP, including a boot-time hang on am335x.
- Lots of bug fixes for NXP i.MX, mostly addressing incorrect settings
in devicetree files, and one revert for broken suspend.
- Fixes for ARM Juno/Vexpress devicetree files, addressing a couple
of schema warnings.
- Regression fixes for qualcomm SoC specific drivers and devicetree
files, reverting an mdt_loader change and at least pastially
reverting some of the 5.15 DTS changes, plus some minor bugfixes
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
-----BEGIN PGP SIGNATURE-----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=Mrh2
-----END PGP SIGNATURE-----
Merge tag 'armsoc-fixes-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC fixes from Arnd Bergmann:
"This is a larger than normal update for Arm SoC specific code, most of
it in device trees, but also drivers and the omap and at91/sama7
platforms:
- There are four new entries to the MAINTAINERS file: Sven Peter and
Alyssa Rosenzweig for Apple M1, Romain Perier for Mstar/sigmastar,
and Vignesh Raghavendra for TI K3
- Build fixes to address randconfig warnings in sharpsl, dove, omap1,
and qcom platforms as well as the scmi and op-tee subsystems
- Regression fixes for missing CONFIG_FB and other options for
several defconfigs
- Several bug fixes for the newly added Microchip SAMA7 platform,
mostly regarding power management
- Missing SMP barriers to protect accesses to SCMI virtio device
- Regression fixes for TI OMAP, including a boot-time hang on am335x.
- Lots of bug fixes for NXP i.MX, mostly addressing incorrect
settings in devicetree files, and one revert for broken suspend.
- Fixes for ARM Juno/Vexpress devicetree files, addressing a couple
of schema warnings.
- Regression fixes for qualcomm SoC specific drivers and devicetree
files, reverting an mdt_loader change and at least pastially
reverting some of the 5.15 DTS changes, plus some minor bugfixes"
* tag 'armsoc-fixes-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (64 commits)
MAINTAINERS: Add Sven Peter as ARM/APPLE MACHINE maintainer
MAINTAINERS: Add Alyssa Rosenzweig as M1 reviewer
firmware: arm_scmi: Add proper barriers to scmi virtio device
firmware: arm_scmi: Simplify spinlocks in virtio transport
ARM: dts: omap3430-sdp: Fix NAND device node
bus: ti-sysc: Use CLKDM_NOAUTO for dra7 dcan1 for errata i893
ARM: sharpsl_param: work around -Wstringop-overread warning
ARM: defconfig: gemini: Restore framebuffer
ARM: dove: mark 'putc' as inline
ARM: omap1: move omap15xx local bus handling to usb.c
MAINTAINERS: Add Vignesh to TI K3 platform maintainership
arm64: dts: imx8m*-venice-gw7902: fix M2_RST# gpio
ARM: imx6: disable the GIC CPU interface before calling stby-poweroff sequence
arm64: dts: ls1028a: fix eSDHC2 node
arm64: dts: imx8mm-kontron-n801x-som: do not allow to switch off buck2
ARM: dts: at91: sama7g5ek: to not touch slew-rate for SDMMC pins
ARM: dts: at91: sama7g5ek: use proper slew-rate settings for GMACs
ARM: at91: pm: preload base address of controllers in tlb
ARM: at91: pm: group constants and addresses loading
ARM: dts: at91: sama7g5ek: add suspend voltage for ddr3l rail
...
Few regression fixes for omaps for the v5.15-rc cycle. There is a fix
for boot time hangs that can happen on some am335x devices that started
when the pruss devicetree nodes were added. The other fixes are less
critical:
- Fix compiler warning for sysc_init_soc() that got recently introduced
- Fix external abort for am335x pruss as otherwise some am335x will hang
- Use CLKDM_NOAUTO quirk also for dra7 dcan1
- Fix older NAND device node regression for omap3-sdp
-----BEGIN PGP SIGNATURE-----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=2z/N
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=fI0x
-----END PGP SIGNATURE-----
Merge tag 'omap-for-v5.15/fixes-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/fixes
Fixes for omaps for v5.15
Few regression fixes for omaps for the v5.15-rc cycle. There is a fix
for boot time hangs that can happen on some am335x devices that started
when the pruss devicetree nodes were added. The other fixes are less
critical:
- Fix compiler warning for sysc_init_soc() that got recently introduced
- Fix external abort for am335x pruss as otherwise some am335x will hang
- Use CLKDM_NOAUTO quirk also for dra7 dcan1
- Fix older NAND device node regression for omap3-sdp
* tag 'omap-for-v5.15/fixes-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: dts: omap3430-sdp: Fix NAND device node
bus: ti-sysc: Use CLKDM_NOAUTO for dra7 dcan1 for errata i893
soc: ti: omap-prm: Fix external abort for am335x pruss
bus: ti-sysc: Add break in switch statement in sysc_init_soc()
Link: https://lore.kernel.org/r/pull-1633609552-789682@atomide.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
-----BEGIN PGP SIGNATURE-----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=X7mM
-----END PGP SIGNATURE-----
Merge tag 'misc-fixes-20211007' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs
Pull netfslib, cachefiles and afs fixes from David Howells:
- Fix another couple of oopses in cachefiles tracing stemming from the
possibility of passing in a NULL object pointer
- Fix netfs_clear_unread() to set READ on the iov_iter so that source
it is passed to doesn't do the wrong thing (some drivers look at the
flag on iov_iter rather than other available information to determine
the direction)
- Fix afs_launder_page() to write back at the correct file position on
the server so as not to corrupt data
* tag 'misc-fixes-20211007' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs:
afs: Fix afs_launder_page() to set correct start file position
netfs: Fix READ/WRITE confusion when calling iov_iter_xarray()
cachefiles: Fix oops with cachefiles_cull() due to NULL object
- Fix plugin static linking with libopencsd on ARM and ARM64.
- Add missing -lstdc++ when linking with libopencsd.
- Add missing topdown metrics events to 'perf test attr'.
- Plug leak sys_event_tables list after processing JSON vendor events entries.
- Sync sound/asound.h copy with the kernel sources.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQR2GiIUctdOfX2qHhGyPKLppCJ+JwUCYV8V0gAKCRCyPKLppCJ+
JwEKAQCqrmoaUcX3hsrb1GqRNVgVpxztL+GmfK8dL9IEWZxSfgEA6ekSZzSx8bn/
i7t3ccKYYuDKA0nqtB5hcaXFArqVTQA=
=AIE3
-----END PGP SIGNATURE-----
Merge tag 'perf-tools-fixes-for-v5.15-2021-10-07' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux
Pull perf tools fixes from Arnaldo Carvalho de Melo:
- Fix plugin static linking with libopencsd on ARM and ARM64
- Add missing -lstdc++ when linking with libopencsd
- Add missing topdown metrics events to 'perf test attr'
- Plug leak sys_event_tables list after processing JSON vendor events
entries
- Sync sound/asound.h copy with the kernel sources
* tag 'perf-tools-fixes-for-v5.15-2021-10-07' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux:
perf tests attr: Add missing topdown metrics events
tools include UAPI: Sync sound/asound.h copy with the kernel sources
perf build: Fix plugin static linking with libopencsd on ARM and ARM64
perf build: Add missing -lstdc++ when linking with libopencsd
perf jevents: Free the sys_event_tables list after processing entries
Introduce the following ethtool operations for VF's representor:
-get_drvinfo
-get_strings
-get_ethtool_stats
-get_sset_count
-get_link
In all cases, existing operations were used with minor
changes which allow us to detect if ethtool op was called for
representor. Only VF VSI stats will be available for representor.
Implement ndo_get_stats64 for port representor. This will update
VF VSI stats and read them.
Signed-off-by: Wojciech Drewek <wojciech.drewek@intel.com>
Tested-by: Sandeep Penigalapati <sandeep.penigalapati@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Slow path means allowing packet to go from uplink to representor
and from representor to correct VF on Rx site and from VF to
representor and to uplink on Tx site.
To accomplish this driver, has to set correct Tx descriptor. When
packet is sent from representor to VF, destination should be
set to VF VSI. When packet is sent from uplink port destination
should be uplink to bypass switch infrastructure and send packet
outside.
On Rx site driver should check source VSI field from Rx descriptor
and based on that forward packed to correct netdev. To allow
this there is a target netdevs table in control plane VSI
struct.
Co-developed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Signed-off-by: Grzegorz Nitka <grzegorz.nitka@intel.com>
Tested-by: Sandeep Penigalapati <sandeep.penigalapati@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
As resetting all VFs behaves mostly like creating new VFs also
eswitch infrastructure has to be recreated. The easiest way to
do that is to rebuild eswitch after resetting VFs.
Implement helper functions to start and stop all representors
queues. This is used to disable traffic on port representors.
In rebuild path:
- NAPI has to be disabled
- eswitch environment has to be set up
- new port representors have to be created, because the old
one had pointer to not existing VFs
- new control plane VSI ring should be remapped
- NAPI hast to be enabled
- rxdid has to be set to FLEX_NIC_2, because this descriptor id
support source_vsi, which is needed on control plane VSI queues
- port representors queues have to be started
Signed-off-by: Grzegorz Nitka <grzegorz.nitka@intel.com>
Tested-by: Sandeep Penigalapati <sandeep.penigalapati@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Only way to enable switchdev is to create VFs when the eswitch
mode is set to switchdev. Check if correct mode is set and
enable switchdev in function which creating VFs.
Disable switchdev when user change number of VFs to 0. Changing
eswitch mode back to legacy when VFs are created in switchdev
mode isn't allowed.
As switchdev takes care of managing filter rules, adding new
rules on VF is blocked.
In case of resetting VF driver has to update pointer in ice_repr
struct, because after reset VSI related things can change.
Co-developed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Signed-off-by: Wojciech Drewek <wojciech.drewek@intel.com>
Signed-off-by: Grzegorz Nitka <grzegorz.nitka@intel.com>
Tested-by: Sandeep Penigalapati <sandeep.penigalapati@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
New type of VSI has to be defined for switchdev control plane
VSI. Number of allocated Tx and Rx queue has to be equal to
amount of VFs, because each port representor should have one
Tx and Rx queue.
Also to not increase number of used irqs too much, control plane
VSI uses only one q_vector and handle all queues in one irq.
To allow handling all queues in one irq , new function to clean
msix for eswitch was introduced. This function will schedule napi
for each representor instead of scheduling it only for one like in
normal clean irq function.
Only one additional msix has to be requested. Always try to request
it in ice_ena_msix_range function.
Signed-off-by: Grzegorz Nitka <grzegorz.nitka@intel.com>
Tested-by: Sandeep Penigalapati <sandeep.penigalapati@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Switchdev environment has to be set up when user create VFs
and eswitch mode is switchdev. Release is done when user
delete all VFs.
Data path in this implementation is based on control plane VSI.
This VSI is used to pass traffic from port representors to
corresponding VFs and vice versa. Default TX rule has to be
added to forward packet to control plane VSI. This will redirect
packets from VFs which don't match other rules to control plane
VSI.
On RX side default rule is added on uplink VSI to receive all
traffic that doesn't match other rules. When setting switchdev
environment all other rules from VFs should be removed. Packet to
VFs will be forwarded by control plane VSI.
As VF without any mac rules can't send any packet because of
antispoof mechanism, VSI antispoof should be turned off on each VFs.
To send packet from representor to correct VSI, destination VSI
field in TX descriptor will have to be filled. Allow that by
setting destination override bit in control plane VSI security config.
Packet from VFs will be received on control plane VSI. Driver
should decide to which netdev forward the packet. Decision is
made based on src_vsi field from descriptor. There is a target
netdev list in control plane VSI struct which choose netdev
based on src_vsi number.
Co-developed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Signed-off-by: Grzegorz Nitka <grzegorz.nitka@intel.com>
Tested-by: Sandeep Penigalapati <sandeep.penigalapati@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
There is no way to change default lan_en and lb_en flags while
adding new rule. Add function that allows changing these flags
on ICE_SW_LKUP_DFLT recipe and any rule id.
lan_en allows packet to go outside if rule is matched. Clearing
this bit will block packet from sending it outside.
lb_en allows packet to be forwarded to other VSI. Clearing
this bit will block packet from forwarding it to other VSI.
Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Tested-by: Sandeep Penigalapati <sandeep.penigalapati@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Implement functions to make setting VSI security config easier.
Main function ice_update_security fills security section field and
checks against error in updating VSI. Reset functions are responsible
for correct filling config according to user expectations.
This helper is needed because destination override is located in
this section. Driver has to set this bit to allow strering Tx packet
on VSI based on value in Tx descriptors.
Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Tested-by: Sandeep Penigalapati <sandeep.penigalapati@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
In switchdev driver shouldn't add MAC, VLAN and promisc
filters on iavf demand but should return success to not
break normal iavf flow.
Achieve that by creating table of functions pointer with
default functions used to parse iavf command. While parse
iavf command, call correct function from table instead of
calling function direct.
When port representors are being created change functions
in table to new one that behaves correctly for switchdev
puprose (ignoring new filters).
Change back to default ops when representors are being
removed.
Co-developed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Signed-off-by: Wojciech Drewek <wojciech.drewek@intel.com>
Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Tested-by: Sandeep Penigalapati <sandeep.penigalapati@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
