IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
This will work similar to the syscall args, we'll allocate an array
of 'struct syscall_arg_fmt' for the tracepoint args and then init them
using the same algorithm used for the defaults for syscall args, i.e.
using its types and sometimes names as hints to find the right scnprintf
routine to beautify them from numbers into strings.
Next step is to stop using libtracevent to printf tracepoints, as we'll
have more beautifiers than int provides, modulo perhaps some plugins.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Luis Cláudio Gonçalves <lclaudio@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-dcl135relxvf6ljisjg13aqg@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We set the default scnprint routines for the syscall args based on its
type or on heuristics based on its names, now we'll use this for
tracepoints as well, so move it out of syscall__set_arg_fmts() and into
a routine that receive just an array of syscall_arg_fmt entries + the
tracepoint format fields list.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Luis Cláudio Gonçalves <lclaudio@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-xs3x0zzyes06c7scdsjn01ty@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The original --reltime patch forbid --time with --reltime.
But it turns out --time doesn't really care about --reltime, because the
relative time is only used at final output, while the time filtering
always works earlier on absolute time.
So just remove the check and allow combining the two options.
Fixes: 90b10f47c0ee ("perf script: Support relative time")
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: http://lore.kernel.org/lkml/20191002164642.1719-1-andi@firstfloor.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
For users of perf-sys.h outside perf, e.g. samples/bpf/bpf_load.c, it's
convenient not to depend on test_attr__*.
After commit 91854f9a077e ("perf tools: Move everything related to
sys_perf_event_open() to perf-sys.h"), all users of perf-sys.h will
depend on test_attr__enabled and test_attr__open.
This commit enables a user to define HAVE_ATTR_TEST to zero in order
to omit the test dependency.
Fixes: 91854f9a077e ("perf tools: Move everything related to sys_perf_event_open() to perf-sys.h")
Signed-off-by: Björn Töpel <bjorn.topel@intel.com>
Acked-by: Song Liu <songliubraving@fb.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: bpf@vger.kernel.org
Cc: netdev@vger.kernel.org
Link: http://lore.kernel.org/lkml/20191001113307.27796-2-bjorn.topel@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add a time chart based on context switch information.
Context switch information was added to the database export fairly
recently, so the chart menu option will only appear if context switch
information is in the database.
Refer to the Exported SQL Viewer Help option for more information about
the chart.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lore.kernel.org/lkml/20190821083216.1340-7-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Record call_time on tree nodes and re-name the misnamed "count" parameter.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lore.kernel.org/lkml/20190821083216.1340-5-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add calculations to determine a time range that encompasses all data.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lore.kernel.org/lkml/20190821083216.1340-4-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add LookupModel() to find a model in the model cache without creating it.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lore.kernel.org/lkml/20190821083216.1340-2-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When not using augmented syscalls, i.e. not passing thru the command
line a eBPF source or object file event that provides the
__augmented_syscalls__ BPF_MAP_TYPE_PERF_EVENT_ARRAY, etc, as with:
perf trace -e tools/perf/examples/bpf/augmented_raw_syscalls.c
or passing that augmented eBPF source/object via the trace.add_events in
.perfconfig file, we were assuming that syscalls were asked for,
differing from when not using augmented syscalls at all.
This is confusing when using .perfconfig to hide the fact we're using
the augmenter, i.e. using:
# perf trace -e sched:* sleep 1
Will show both the scheduler tracepoints and the syscalls, where what we
want is to show just the scheduler tracepoints.
To see the scheduler tracepoints and some specific syscall strace-like
formatting, one has to use:
# perf trace -e sched:*,nanosleep sleep 1
Or, if wanting all the syscalls:
# perf trace -e sched:* --syscalls sleep 1
This way 'perf trace' can be used to trace just a set of tracepoints
while allowing for mixing with strace-like when desired, by simply
adding to the mix the name of the syscalls to show in addition to the
tracepoints.
Fix it so that the behaviour using the eBPF based syscall augmenter is
the same as when not using one.
Testing:
Before this patch, with this ~/.perfconfig:
# egrep -B1 ^[[:space:]]+add_events ~/.perfconfig
[trace]
add_events = /home/acme/git/perf/tools/perf/examples/bpf/augmented_raw_syscalls.o
#
That points to this pre-compiled eBPF syscall augmenter:
# file /home/acme/git/perf/tools/perf/examples/bpf/augmented_raw_syscalls.o
/home/acme/git/perf/tools/perf/examples/bpf/augmented_raw_syscalls.o: ELF 64-bit LSB relocatable, eBPF, version 1 (SYSV), with debug_info, not stripped
And when asking for _only_ sched:sched_switch and sched:sched_wakeup we
were unconditionally getting all the syscalls formatted strace-like:
# perf trace -e sched:*switch,sched:*wakeup sleep 1 |& tail
0.633 fstat(3, 0x7fe11d030ac0) = 0
0.635 mmap(NULL, 217750512, PROT_READ, MAP_PRIVATE, 3, 0) = 0x7fe10fec5000
0.643 close(3) = 0
0.668 nanosleep(0x7fff649a3a90, NULL) ...
0.672 sched:sched_switch:prev_comm=sleep prev_pid=4417 prev_prio=120 prev_state=S ==> next_comm=swapper/6 next_pid=0 next_prio=120
1000.822 sched:sched_wakeup:comm=sleep pid=4417 prio=120 target_cpu=006
0.668 ... [continued]: nanosleep()) = 0
1000.923 close(1) = 0
1000.941 close(2) = 0
1000.974 exit_group(0) = ?
#
After the patch:
# perf trace -e sched:*switch,sched:*wakeup sleep 1
0.000 sched:sched_wakeup:comm=perf pid=5529 prio=120 target_cpu=005
1.186 sched:sched_switch:prev_comm=sleep prev_pid=5529 prev_prio=120 prev_state=S ==> next_comm=swapper/5 next_pid=0 next_prio=120
1001.573 sched:sched_wakeup:comm=sleep pid=5529 prio=120 target_cpu=005
#
If we add the "open*" syscalls to the mix then the eBPF augmented _will_
be used and these syscalls will be traced together with the specified
sched tracepoints:
# cd /sys/kernel/debug/tracing/events/syscalls/
# ls -1d sys_enter_open*
sys_enter_open
sys_enter_openat
sys_enter_open_by_handle_at
sys_enter_open_tree
#
# perf trace -e open*,sched:*switch,sched:*wakeup sleep 1
0.000 sched:sched_wakeup:comm=perf pid=5580 prio=120 target_cpu=005
0.590 openat(AT_FDCWD, "/etc/ld.so.cache", O_RDONLY|O_CLOEXEC) = 3
0.616 openat(AT_FDCWD, "/lib64/libc.so.6", O_RDONLY|O_CLOEXEC) = 3
0.846 openat(AT_FDCWD, "/usr/lib/locale/locale-archive", O_RDONLY|O_CLOEXEC) = 3
0.891 sched:sched_switch:prev_comm=sleep prev_pid=5580 prev_prio=120 prev_state=S ==> next_comm=swapper/5 next_pid=0 next_prio=120
1001.005 sched:sched_wakeup:comm=sleep pid=5580 prio=120 target_cpu=005
#
And as we can see, the pathnames were collected via the eBPF augmenters.
If we don't specify anything it'll trace all syscalls:
# perf trace sleep 1 |& tail
0.299 brk(0x5597543a3000) = 0x5597543a3000
0.302 brk(NULL) = 0x5597543a3000
0.307 openat(AT_FDCWD, "/usr/lib/locale/locale-archive", O_RDONLY|O_CLOEXEC) = 3
0.313 fstat(3, 0x7feece50cac0) = 0
0.315 mmap(NULL, 217750512, PROT_READ, MAP_PRIVATE, 3, 0) = 0x7feec13a1000
0.323 close(3) = 0
0.354 nanosleep(0x7ffe338856e0, NULL) = 0
1000.641 close(1) = 0
1000.655 close(2) = 0
1000.673 exit_group(0) = ?
#
Ditto if we don't use .perfconfig's trace.add_events but instead pass
just the augmenter as a command line event:
# vim ~/.perfconfig
# egrep -B1 ^[[:space:]]+add_events ~/.perfconfig
# perf trace -e /home/acme/git/perf/tools/perf/examples/bpf/augmented_raw_syscalls.o sleep 1 |& tail
0.294 brk(0x55ae08ec3000) = 0x55ae08ec3000
0.297 brk(NULL) = 0x55ae08ec3000
0.302 openat(AT_FDCWD, "/usr/lib/locale/locale-archive", O_RDONLY|O_CLOEXEC) = 3
0.309 fstat(3, 0x7f726488fac0) = 0
0.311 mmap(NULL, 217750512, PROT_READ, MAP_PRIVATE, 3, 0) = 0x7f7257724000
0.319 close(3) = 0
0.347 nanosleep(0x7ffe23643a70, NULL) = 0
1000.560 close(1) = 0
1000.575 close(2) = 0
1000.593 exit_group(0) = ?
#
As well as that + some syscall names for strace-like formatting:
# perf trace -e socket,connect,/home/acme/git/perf/tools/perf/examples/bpf/augmented_raw_syscalls.o ssh localhost
0.000 socket(PF_LOCAL, SOCK_STREAM|CLOEXEC|NONBLOCK, 0) = 3
0.021 connect(3, { .family: PF_LOCAL, path: /var/run/nscd/socket }, 110) = -1 ENOENT (No such file or directory)
0.034 socket(PF_LOCAL, SOCK_STREAM|CLOEXEC|NONBLOCK, 0) = 3
0.041 connect(3, { .family: PF_LOCAL, path: /var/run/nscd/socket }, 110) = -1 ENOENT (No such file or directory)
0.163 socket(PF_LOCAL, SOCK_STREAM, 0) = 4
0.185 connect(4, { .family: PF_LOCAL, path: /var/lib/sss/pipes/nss }, 110) = 0
0.670 socket(PF_LOCAL, SOCK_STREAM|CLOEXEC|NONBLOCK, 0) = 7
0.684 connect(7, { .family: PF_LOCAL, path: /var/run/nscd/socket }, 110) = -1 ENOENT (No such file or directory)
0.694 socket(PF_LOCAL, SOCK_STREAM|CLOEXEC|NONBLOCK, 0) = 7
0.701 connect(7, { .family: PF_LOCAL, path: /var/run/nscd/socket }, 110) = -1 ENOENT (No such file or directory)
0.994 socket(PF_LOCAL, SOCK_STREAM|CLOEXEC|NONBLOCK, 0) = 5
1.006 connect(5, { .family: PF_LOCAL, path: /var/run/nscd/socket }, 110) = -1 ENOENT (No such file or directory)
1.014 socket(PF_LOCAL, SOCK_STREAM|CLOEXEC|NONBLOCK, 0) = 5
1.022 connect(5, { .family: PF_LOCAL, path: /var/run/nscd/socket }, 110) = -1 ENOENT (No such file or directory)
1.068 socket(PF_INET, SOCK_STREAM, IPPROTO_TCP) = 5
1.087 connect(5, { .family: PF_INET, port: 22, addr: 127.0.0.1 }, 16) = 0
24.299 socket(PF_LOCAL, SOCK_STREAM, 0) = 6
24.337 connect(6, { .family: PF_LOCAL, path: /var/run/.heim_org.h5l.kcm-socket }, 110) = 0
28.441 socket(PF_LOCAL, SOCK_STREAM, 0) = 6
28.516 connect(6, { .family: PF_LOCAL, path: /var/run/.heim_org.h5l.kcm-socket }, 110) = 0
root@localhost's password:^C
#
Everything works without augmenters:
# egrep -B1 ^[[:space:]]+add_events ~/.perfconfig
# perf trace sleep 1 |& tail
0.261 brk(0x5635068ac000) = 0x5635068ac000
0.264 brk(NULL) = 0x5635068ac000
0.268 openat(AT_FDCWD, 0xdce642a0, O_RDONLY|O_CLOEXEC) = 3
0.275 fstat(3, 0x7f3fdce97ac0) = 0
0.277 mmap(NULL, 217750512, PROT_READ, MAP_PRIVATE, 3, 0) = 0x7f3fcfd2c000
0.284 close(3) = 0
0.310 nanosleep(0x7ffdaea6ecd0, NULL) = 0
1000.552 close(1) = 0
1000.565 close(2) = 0
1000.580 exit_group(0) = ?
#
# perf trace -e connect ssh localhost
0.000 connect(3, 0x58266930, 110) = -1 ENOENT (No such file or directory)
0.022 connect(3, 0x58266af0, 110) = -1 ENOENT (No such file or directory)
0.150 connect(4, 0x58266b00, 110) = 0
0.490 connect(7, 0x58264150, 110) = -1 ENOENT (No such file or directory)
0.505 connect(7, 0x58264300, 110) = -1 ENOENT (No such file or directory)
0.832 connect(5, 0x58266220, 110) = -1 ENOENT (No such file or directory)
0.847 connect(5, 0x582663e0, 110) = -1 ENOENT (No such file or directory)
0.899 connect(5, 0x95ba0630, 16) = 0
25.619 connect(6, 0x58266360, 110) = 0
40.564 connect(6, 0x58266330, 110) = 0
root@localhost's password: ^C
#
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Luis Cláudio Gonçalves <lclaudio@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-624f6jxic04031tnt40va4dd@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When we add events via the '[trace]' section in perfconfig the command
line options are not yet processed, so when something goes wrong with
parsing those events and using --verbose is advised, we end up not
getting any more verbosity by doing so.
So just copy the trace.add_events string for later processing, after we
processed --verbose and the other command line options.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Luis Cláudio Gonçalves <lclaudio@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-d6wbnz85ftqljdll6ynjyjd8@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To allow them to be used with other stuff, such as tracepoints.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Luis Cláudio Gonçalves <lclaudio@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-od3gzg77ppqgnnrxqv40fvgx@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
As this has all the things needed to format tracepoints events, not just
syscalls, that, after all, are just tracepoints with a set in stone ABI,
i.e. order and number of parameters.
For tracepoints we'll create a
static struct syscall_fmt tracepoint_fmts[]
array and will fill the ->arg[] entries with the beautifier for each
positional argument and record the name, then, when we need it, we'll
just check that the position has the same name, maybe even type, so that
we can do some check that the tracepoint hasn't changed, if it has, we
can even reorder things.
Keep calling it syscall_fmt but use it as well for tracepoints, do it
this way to minimize changes and reuse what is in place for syscalls,
we'll see.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Luis Cláudio Gonçalves <lclaudio@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-2x1jgiev13zt4njaanlnne0d@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Renaming it to evlist__set_default_evsel_handler(), to better reflect
what we want to do, which is to set a default handler for events we
still haven't set a custom handler, like the ones for "msr:write_msr",
etc that are coming soon.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-e1bit7upnpmtsayh8039kfuw@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
It all operates on the evsels in the session's evlist, so move it to the
evlist layer to make it useful to tools not using perf_session, just
evlists, like 'perf trace' in live mode.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-9oc53gnfi53vg82fvolkm85g@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Just read it so that later on the per arch init routine can use it,
e.g. x86__annotate_init().
When using a perf.data file this is obtained from a header that was put
there by 'perf record', and then it may be for another machine, another
arch.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-4t4n3o8l8s0tc2b1pq53hyr4@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
In 'perf top' we use that cpuid when initializing the per arch
annotation init routines (e.g. x86__annotate_init()) and in that case
(live mode, 'perf top') we need to obtain it from the running machine,
not from a perf.data file header.
Provide a means to do that. Will be used by 'perf top' in a followup
patch.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-h2wb3sx7u7znx6lqfezrh7ca@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Return errno when open_memstream() fails and add two new speciall error
codes for when an invalid, non BPF file or one without BTF is passed to
symbol__disassemble_bpf(), so that its callers can rely on
symbol__strerror_disassemble() to convert that to a human readable error
message that can help figure out what is wrong, with hints even.
Cc: Russell King - ARM Linux admin <linux@armlinux.org.uk>
Cc: Song Liu <songliubraving@fb.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>,
Cc: Will Deacon <will@kernel.org>
Link: https://lkml.kernel.org/n/tip-usevw9r2gcipfcrbpaueurw0@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We should return errno or the annotation extra range understood by
symbol__strerror_disassemble() instead of -1, fix it, returning ENOMEM
instead.
Reported-by: Russell King - ARM Linux admin <linux@armlinux.org.uk>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>,
Cc: Will Deacon <will@kernel.org>
Link: https://lkml.kernel.org/n/tip-8of1cmj3rz0mppfcshc9bbqq@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
They are called from symbol__annotate() and to propagate errors that can
help understand the problem make them return what
symbol__strerror_disassemble() known, i.e. errno codes and other
annotation specific errors in a special, out of errnos, range.
Reported-by: Russell King - ARM Linux admin <linux@armlinux.org.uk>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>,
Cc: Will Deacon <will@kernel.org>
Link: https://lkml.kernel.org/n/tip-pqx7srcv7tixgid251aeboj6@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We were just returning -1 in symbol__annotate() when symbol__annotate()
failed, propagate its error as it is used later to pass to
symbol__strerror_disassemble() to present a error message to the user,
that in some cases were getting:
"Invalid -1 error code"
Fix it to propagate the error.
Reported-by: Russell King - ARM Linux admin <linux@armlinux.org.uk>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>,
Cc: Will Deacon <will@kernel.org>
Link: https://lkml.kernel.org/n/tip-0tj89rs9g7nbcyd5skadlvuu@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Callers of symbol__annotate() expect a errno value or some other
extended error value range in symbol__strerror_disassemble() to
convert to a proper error string, fix it when propagating a failure to
find the arch specific annotation routines via arch__find(arch_name).
Reported-by: Russell King - ARM Linux admin <linux@armlinux.org.uk>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>,
Cc: Will Deacon <will@kernel.org>
Link: https://lkml.kernel.org/n/tip-o0k6dw7cas0vvmjjvgsyvu1i@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The callers of symbol__annotate2() use symbol__strerror_disassemble() to
convert its failure returns into a human readable string, so
propagate error values from functions it calls, starting with
perf_env__arch() that when fails the right thing to do is to look at
'errno' to see why its possible call to uname() failed.
Reported-by: Russell King - ARM Linux admin <linux@armlinux.org.uk>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>,
Cc: Will Deacon <will@kernel.org>
Link: https://lkml.kernel.org/n/tip-it5d83kyusfhb1q1b0l4pxzs@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
I.e. if evsel->evlist or evsel->evlist->env isn't set, return the
environment for the running machine, as that would be set if reading
from a perf.data file.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-uqq4grmhbi12rwb0lfpo6lfu@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
For consistency, propagate the exact cause for get_cpuid() to have
failed.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-9ig269f7ktnhh99g4l15vpu2@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The Intel fixed counters use a special table to override the JSON
information.
During this override the period information from the JSON file got
dropped, which results in inst_retired.any and similar running with
frequency mode instead of a period.
Just specify the expected period in the table.
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Link: http://lore.kernel.org/lkml/20190927233546.11533-2-andi@firstfloor.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When the LBR data and the instructions in a binary do not match the loop
printing instructions could get confused and print a long stream of
bogus <bad> instructions.
The problem was that if the instruction decoder cannot decode an
instruction it ilen wasn't initialized, so the loop going through the
basic block would continue with the previous value.
Harden the code to avoid such problems:
- Make sure ilen is always freshly initialized and is 0 for bad
instructions.
- Do not overrun the code buffer while printing instructions
- Print a warning message if the final jump is not on an instruction
boundary.
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Link: http://lore.kernel.org/lkml/20190927233546.11533-1-andi@firstfloor.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Specification claims latest version of jitdump file format is 2. Current
jit dump reading code treats 1 as the latest version.
Correct spec to match code.
The original language made it unclear the value to be written in the
magic field.
Revise language that the writer always writes the same value. Specify
that the reader uses the value to detect endian mismatches.
Signed-off-by: Steve MacLean <Steve.MacLean@Microsoft.com>
Acked-by: Stephane Eranian <eranian@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Brian Robbins <brianrob@microsoft.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Eric Saint-Etienne <eric.saint.etienne@oracle.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: John Keeping <john@metanate.com>
Cc: John Salem <josalem@microsoft.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Song Liu <songliubraving@fb.com>
Cc: Tom McDonald <thomas.mcdonald@microsoft.com>
Link: http://lore.kernel.org/lkml/BN8PR21MB1362F63CDE7AC69736FC7F9EF7800@BN8PR21MB1362.namprd21.prod.outlook.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
During perf inject --jit, JIT_CODE_MOVE records were injecting MMAP records
with an incorrect filename. Specifically it was missing the ".so" suffix.
Further the JIT_CODE_LOAD record were silently truncating the
jr->load.code_index field to 32 bits before generating the filename.
Make both records emit the same filename based on the full 64 bit
code_index field.
Fixes: 9b07e27f88b9 ("perf inject: Add jitdump mmap injection support")
Cc: stable@vger.kernel.org # v4.6+
Signed-off-by: Steve MacLean <Steve.MacLean@Microsoft.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Brian Robbins <brianrob@microsoft.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Eric Saint-Etienne <eric.saint.etienne@oracle.com>
Cc: John Keeping <john@metanate.com>
Cc: John Salem <josalem@microsoft.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Song Liu <songliubraving@fb.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom McDonald <thomas.mcdonald@microsoft.com>
Link: http://lore.kernel.org/lkml/BN8PR21MB1362FF8F127B31DBF4121528F7800@BN8PR21MB1362.namprd21.prod.outlook.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Whenever an mmap/mmap2 event occurs, the map tree must be updated to add a new
entry. If a new map overlaps a previous map, the overlapped section of the
previous map is effectively unmapped, but the non-overlapping sections are
still valid.
maps__fixup_overlappings() is responsible for creating any new map entries from
the previously overlapped map. It optionally creates a before and an after map.
When creating the after map the existing code failed to adjust the map.pgoff.
This meant the new after map would incorrectly calculate the file offset
for the ip. This results in incorrect symbol name resolution for any ip in the
after region.
Make maps__fixup_overlappings() correctly populate map.pgoff.
Add an assert that new mapping matches old mapping at the beginning of
the after map.
Committer-testing:
Validated correct parsing of libcoreclr.so symbols from .NET Core 3.0 preview9
(which didn't strip symbols).
Preparation:
~/dotnet3.0-preview9/dotnet new webapi -o perfSymbol
cd perfSymbol
~/dotnet3.0-preview9/dotnet publish
perf record ~/dotnet3.0-preview9/dotnet \
bin/Debug/netcoreapp3.0/publish/perfSymbol.dll
^C
Before:
perf script --show-mmap-events 2>&1 | grep -e MMAP -e unknown |\
grep libcoreclr.so | head -n 4
dotnet 1907 373352.698780: PERF_RECORD_MMAP2 1907/1907: \
[0x7fe615726000(0x768000) @ 0 08:02 5510620 765057155]: \
r-xp .../3.0.0-preview9-19423-09/libcoreclr.so
dotnet 1907 373352.701091: PERF_RECORD_MMAP2 1907/1907: \
[0x7fe615974000(0x1000) @ 0x24e000 08:02 5510620 765057155]: \
rwxp .../3.0.0-preview9-19423-09/libcoreclr.so
dotnet 1907 373352.701241: PERF_RECORD_MMAP2 1907/1907: \
[0x7fe615c42000(0x1000) @ 0x51c000 08:02 5510620 765057155]: \
rwxp .../3.0.0-preview9-19423-09/libcoreclr.so
dotnet 1907 373352.705249: 250000 cpu-clock: \
7fe6159a1f99 [unknown] \
(.../3.0.0-preview9-19423-09/libcoreclr.so)
After:
perf script --show-mmap-events 2>&1 | grep -e MMAP -e unknown |\
grep libcoreclr.so | head -n 4
dotnet 1907 373352.698780: PERF_RECORD_MMAP2 1907/1907: \
[0x7fe615726000(0x768000) @ 0 08:02 5510620 765057155]: \
r-xp .../3.0.0-preview9-19423-09/libcoreclr.so
dotnet 1907 373352.701091: PERF_RECORD_MMAP2 1907/1907: \
[0x7fe615974000(0x1000) @ 0x24e000 08:02 5510620 765057155]: \
rwxp .../3.0.0-preview9-19423-09/libcoreclr.so
dotnet 1907 373352.701241: PERF_RECORD_MMAP2 1907/1907: \
[0x7fe615c42000(0x1000) @ 0x51c000 08:02 5510620 765057155]: \
rwxp .../3.0.0-preview9-19423-09/libcoreclr.so
All the [unknown] symbols were resolved.
Signed-off-by: Steve MacLean <Steve.MacLean@Microsoft.com>
Tested-by: Brian Robbins <brianrob@microsoft.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Eric Saint-Etienne <eric.saint.etienne@oracle.com>
Cc: John Keeping <john@metanate.com>
Cc: John Salem <josalem@microsoft.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Song Liu <songliubraving@fb.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom McDonald <thomas.mcdonald@microsoft.com>
Link: http://lore.kernel.org/lkml/BN8PR21MB136270949F22A6A02335C238F7800@BN8PR21MB1362.namprd21.prod.outlook.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
In the pmu-events directory for JSON file definitions use the
official machine name IBM z15 instead of machine type number
8561. This is consistent with previous machines.
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Link: http://lore.kernel.org/lkml/20190927081147.18345-2-tmricht@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add s390 transaction counter definition for machine 8561. This is the
same file as for the predecessor machine.
Fixes: 6e67d77d673d ("perf vendor events s390: Add JSON files for machine type 8561")
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Link: http://lore.kernel.org/lkml/20190927081147.18345-1-tmricht@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The 'test_dir' variable is assigned to the 'release' array which is
out-of-scope 3 lines later.
Extend the scope of the 'release' array so that an out-of-scope array
isn't accessed.
Bug detected by clang's address sanitizer.
Fixes: 07bc5c699a3d ("perf tools: Make fetch_kernel_version() publicly available")
Cc: stable@vger.kernel.org # v4.4+
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lore.kernel.org/lkml/20190926220018.25402-1-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To pick the changes from:
78a1b96bcf7a ("fscrypt: add FS_IOC_REMOVE_ENCRYPTION_KEY_ALL_USERS ioctl")
23c688b54016 ("fscrypt: allow unprivileged users to add/remove keys for v2 policies")
5dae460c2292 ("fscrypt: v2 encryption policy support")
5a7e29924dac ("fscrypt: add FS_IOC_GET_ENCRYPTION_KEY_STATUS ioctl")
b1c0ec3599f4 ("fscrypt: add FS_IOC_REMOVE_ENCRYPTION_KEY ioctl")
22d94f493bfb ("fscrypt: add FS_IOC_ADD_ENCRYPTION_KEY ioctl")
3b6df59bc4d2 ("fscrypt: use FSCRYPT_* definitions, not FS_*")
2336d0deb2d4 ("fscrypt: use FSCRYPT_ prefix for uapi constants")
7af0ab0d3aab ("fs, fscrypt: move uapi definitions to new header <linux/fscrypt.h>")
That don't trigger any changes in tooling, as it so far is used only
for:
$ grep -l 'fs\.h' tools/perf/trace/beauty/*.sh | xargs grep regex=
tools/perf/trace/beauty/rename_flags.sh:regex='^[[:space:]]*#[[:space:]]*define[[:space:]]+RENAME_([[:alnum:]_]+)[[:space:]]+\(1[[:space:]]*<<[[:space:]]*([[:xdigit:]]+)[[:space:]]*\)[[:space:]]*.*'
tools/perf/trace/beauty/sync_file_range.sh:regex='^[[:space:]]*#[[:space:]]*define[[:space:]]+SYNC_FILE_RANGE_([[:alnum:]_]+)[[:space:]]+([[:xdigit:]]+)[[:space:]]*.*'
tools/perf/trace/beauty/usbdevfs_ioctl.sh:regex="^#[[:space:]]*define[[:space:]]+USBDEVFS_(\w+)(\(\w+\))?[[:space:]]+_IO[CWR]{0,2}\([[:space:]]*(_IOC_\w+,[[:space:]]*)?'U'[[:space:]]*,[[:space:]]*([[:digit:]]+).*"
tools/perf/trace/beauty/usbdevfs_ioctl.sh:regex="^#[[:space:]]*define[[:space:]]+USBDEVFS_(\w+)[[:space:]]+_IO[WR]{0,2}\([[:space:]]*'U'[[:space:]]*,[[:space:]]*([[:digit:]]+).*"
$
This silences this perf build warning:
Warning: Kernel ABI header at 'tools/include/uapi/linux/fs.h' differs from latest version at 'include/uapi/linux/fs.h'
diff -u tools/include/uapi/linux/fs.h include/uapi/linux/fs.h
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Eric Biggers <ebiggers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-44g48exl9br9ba0t64chqb4i@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
With this change if a perf_date parameter is provided to asciidoc then
it will override the default date written to the man page metadata.
Without this change, or if the perf_date isn't specified, then the
current date is written to the metadata.
Having this parameter allows the metadata to be constant if builds
happen on different dates.
The name of the parameter is intended to be consistent with the existing
perf_version parameter.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lore.kernel.org/lkml/20190921041327.155054-1-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
An optimized build such as:
make -C tools/perf CLANG=1 CC=clang EXTRA_CFLAGS="-O3
will turn the dereference operation into a ud2 instruction, raising a
SIGILL rather than a SIGSEGV. Use raise(..) for correctness and clarity.
Similar issues were addressed in Numfor Mbiziwo-Tiapo's patch:
https://lkml.org/lkml/2019/7/8/1234
Committer testing:
Before:
[root@quaco ~]# perf test hooks
55: perf hooks : Ok
[root@quaco ~]# perf test -v hooks
55: perf hooks :
--- start ---
test child forked, pid 17092
SIGSEGV is observed as expected, try to recover.
Fatal error (SEGFAULT) in perf hook 'test'
test child finished with 0
---- end ----
perf hooks: Ok
[root@quaco ~]#
After:
[root@quaco ~]# perf test hooks
55: perf hooks : Ok
[root@quaco ~]# perf test -v hooks
55: perf hooks :
--- start ---
test child forked, pid 17909
SIGSEGV is observed as expected, try to recover.
Fatal error (SEGFAULT) in perf hook 'test'
test child finished with 0
---- end ----
perf hooks: Ok
[root@quaco ~]#
Fixes: a074865e60ed ("perf tools: Introduce perf hooks")
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lore.kernel.org/lkml/20190925195924.152834-2-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Naresh Kamboju reported, that on the i386 build pr_err()
doesn't get defined properly due to header ordering:
perf-in.o: In function `libunwind__x86_reg_id':
tools/perf/util/libunwind/../../arch/x86/util/unwind-libunwind.c:109:
undefined reference to `pr_err'
Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
They go on accumulating there like the debug.h one, that was introduced
here:
f23610245c1a ("perf list: Add debug support for outputing alias string")
But then, when that need is removed via:
2073ad3326b7 ("perf tools: Factor out PMU matching in parser")
The thing stays there, so continue the house cleaning spree...
list.h not needed, no macros from there are used, and 'struct
list_head' is in linux/types.h, ditto for util.h, no need for that as
well.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-zkxr3mf6inun8m5mbnil4u0d@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
With Java 11 there is no seperate JRE anymore.
Details:
https://coderanch.com/t/701603/java/JRE-JDK
Therefore the detection of the JRE needs to be adapted.
This change works for s390 and x86. I have not tested other platforms.
Committer testing:
Continues to work with the OpenJDK 8:
$ rm -f ~acme/lib64/libperf-jvmti.so
$ rpm -qa | grep jdk-devel
java-1.8.0-openjdk-devel-1.8.0.222.b10-0.fc30.x86_64
$ git log --oneline -1
a51937170f33 (HEAD -> perf/core) perf build: Add detection of java-11-openjdk-devel package
$ rm -rf /tmp/build/perf ; mkdir -p /tmp/build/perf ; make -C tools/perf O=/tmp/build/perf install > /dev/null 2>1
$ ls -la ~acme/lib64/libperf-jvmti.so
-rwxr-xr-x. 1 acme acme 230744 Sep 24 16:46 /home/acme/lib64/libperf-jvmti.so
$
Suggested-by: Andreas Krebbel <krebbel@linux.ibm.com>
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Hendrik Brueckner <brueckner@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Link: http://lore.kernel.org/lkml/20190909114116.50469-4-tmricht@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This patch is to remove following hardware events
from JSON file which are not supported on POWER8.
pm_l3_p0_grp_pump
pm_l3_p0_lco_data
pm_l3_p0_lco_no_data
pm_l3_p0_lco_rty
Note: Unfortunately power8 event list is not publicly available.
Fixes: c3b4d5c4afb0 ("perf vendor events: Remove P8 HW events which are not supported")
Signed-off-by: Mamatha Inamdar <mamatha4@linux.vnet.ibm.com>
Acked-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20190909065624.11956.3992.stgit@localhost.localdomain
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
I'm not fully sure if this is the correct fix, but without this I get
crashes on more complex perf stat metric usages. The problem is that
part of the state gets freed when a weak group fails, but then is later
still used. Just don't free the ids, we're going to reuse them anyways
on the weak group retry.
For example:
% perf stat -M IpB,IpCall,IpTB,IPC,Retiring_SMT,Frontend_Bound_SMT,Kernel_Utilization,CPU_Utilization --metric-only -a -I 1000 sleep 2
crashes and gives in valgrind:
=21527== Invalid write of size 8
==21527== at 0x4EE582: hlist_add_head (list.h:644)
==21527== by 0x4EFD3C: perf_evlist__id_hash (evlist.c:477)
==21527== by 0x4EFD99: perf_evlist__id_add (evlist.c:483)
==21527== by 0x4EFF15: perf_evlist__id_add_fd (evlist.c:524)
==21527== by 0x4FC693: store_evsel_ids (evsel.c:2969)
==21527== by 0x4FC76C: perf_evsel__store_ids (evsel.c:2986)
==21527== by 0x450DA7: __run_perf_stat (builtin-stat.c:519)
==21527== by 0x451285: run_perf_stat (builtin-stat.c:636)
==21527== by 0x454619: cmd_stat (builtin-stat.c:1966)
==21527== by 0x4D557D: run_builtin (perf.c:310)
==21527== by 0x4D57EA: handle_internal_command (perf.c:362)
==21527== by 0x4D5931: run_argv (perf.c:406)
==21527== Address 0x12e3f008 is 104 bytes inside a block of size 2,056 free'd
==21527== at 0x4839A0C: free (vg_replace_malloc.c:540)
==21527== by 0x627139: xyarray__delete (xyarray.c:32)
==21527== by 0x4F6BE4: perf_evsel__free_id (evsel.c:1253)
==21527== by 0x4FA11F: evsel__close (evsel.c:1994)
==21527== by 0x4F30A3: perf_evlist__reset_weak_group (evlist.c:1783)
==21527== by 0x450B47: __run_perf_stat (builtin-stat.c:466)
==21527== by 0x451285: run_perf_stat (builtin-stat.c:636)
==21527== by 0x454619: cmd_stat (builtin-stat.c:1966)
==21527== by 0x4D557D: run_builtin (perf.c:310)
==21527== by 0x4D57EA: handle_internal_command (perf.c:362)
==21527== by 0x4D5931: run_argv (perf.c:406)
==21527== by 0x4D5CAE: main (perf.c:531)
==21527== Block was alloc'd at
==21527== at 0x483AB1A: calloc (vg_replace_malloc.c:762)
==21527== by 0x627024: zalloc (zalloc.c:8)
==21527== by 0x627088: xyarray__new (xyarray.c:10)
==21527== by 0x4F6B20: perf_evsel__alloc_id (evsel.c:1237)
==21527== by 0x4FC74E: perf_evsel__store_ids (evsel.c:2983)
==21527== by 0x450DA7: __run_perf_stat (builtin-stat.c:519)
==21527== by 0x451285: run_perf_stat (builtin-stat.c:636)
==21527== by 0x454619: cmd_stat (builtin-stat.c:1966)
==21527== by 0x4D557D: run_builtin (perf.c:310)
==21527== by 0x4D57EA: handle_internal_command (perf.c:362)
==21527== by 0x4D5931: run_argv (perf.c:406)
==21527== by 0x4D5CAE: main (perf.c:531)
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Link: http://lore.kernel.org/lkml/20190923233339.25326-1-andi@firstfloor.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Make sure to not free the name passed in by the caller, but free all the
allocated ids when parsing expressions.
The loop at the end knows that the first entry shouldn't be freed, so
make sure the caller name is the first entry.
Fixes
% perf stat -M IpB,IpCall,IpTB,IPC,Retiring_SMT,Frontend_Bound_SMT,Kernel_Utilization,CPU_Utilization --metric-only -a -I 1000 sleep 2
valgrind:
1.009943231 ==21527== Invalid read of size 1
==21527== at 0x483CB74: strcmp (vg_replace_strmem.c:849)
==21527== by 0x582CF8: collect_all_aliases (stat-display.c:554)
==21527== by 0x582EB3: collect_data (stat-display.c:577)
==21527== by 0x583A32: print_counter_aggr (stat-display.c:806)
==21527== by 0x584FAD: perf_evlist__print_counters (stat-display.c:1200)
==21527== by 0x45133A: print_counters (builtin-stat.c:655)
==21527== by 0x450629: process_interval (builtin-stat.c:353)
==21527== by 0x450FBD: __run_perf_stat (builtin-stat.c:564)
==21527== by 0x451285: run_perf_stat (builtin-stat.c:636)
==21527== by 0x454619: cmd_stat (builtin-stat.c:1966)
==21527== by 0x4D557D: run_builtin (perf.c:310)
==21527== by 0x4D57EA: handle_internal_command (perf.c:362)
==21527== Address 0x12826cd0 is 0 bytes inside a block of size 25 free'd
==21527== at 0x4839A0C: free (vg_replace_malloc.c:540)
==21527== by 0x627041: __zfree (zalloc.c:13)
==21527== by 0x57F66A: generic_metric (stat-shadow.c:814)
==21527== by 0x580B21: perf_stat__print_shadow_stats (stat-shadow.c:1057)
==21527== by 0x58418E: print_metric_headers (stat-display.c:943)
==21527== by 0x5844BC: print_interval (stat-display.c:1004)
==21527== by 0x584DEB: perf_evlist__print_counters (stat-display.c:1172)
==21527== by 0x45133A: print_counters (builtin-stat.c:655)
==21527== by 0x450629: process_interval (builtin-stat.c:353)
==21527== by 0x450FBD: __run_perf_stat (builtin-stat.c:564)
==21527== by 0x451285: run_perf_stat (builtin-stat.c:636)
==21527== by 0x454619: cmd_stat (builtin-stat.c:1966)
==21527== Block was alloc'd at
==21527== at 0x483880B: malloc (vg_replace_malloc.c:309)
==21527== by 0x51677DE: strdup (in /usr/lib64/libc-2.29.so)
==21527== by 0x506457: parse_events_name (parse-events.c:1754)
==21527== by 0x5550BB: parse_events_parse (parse-events.y:214)
==21527== by 0x50694D: parse_events__scanner (parse-events.c:1887)
==21527== by 0x506AEF: parse_events (parse-events.c:1927)
==21527== by 0x521D8B: metricgroup__parse_groups (metricgroup.c:527)
==21527== by 0x45156F: parse_metric_groups (builtin-stat.c:721)
==21527== by 0x6228A9: get_value (parse-options.c:243)
==21527== by 0x62363F: parse_short_opt (parse-options.c:348)
==21527== by 0x62363F: parse_options_step (parse-options.c:536)
==21527== by 0x62363F: parse_options_subcommand (parse-options.c:651)
==21527== by 0x453C1D: cmd_stat (builtin-stat.c:1718)
==21527== by 0x4D557D: run_builtin (perf.c:310)
and also a leak report.
Committer testing:
Before:
# perf stat -M IpB,IpCall,IpTB,IPC,Retiring_SMT,Frontend_Bound_SMT,Kernel_Utilization,CPU_Utilization --metric-only -a -I 1000 sleep 2
# time CPU_Utilization
1.000470810 free(): double free detected in tcache 2
Aborted (core dumped)
#
After:
# perf stat -M IpB,IpCall,IpTB,IPC,Retiring_SMT,Frontend_Bound_SMT,Kernel_Utilization,CPU_Utilization --metric-only -a -I 1000 sleep 2
# time CPU_Utilization
1.000494752 0.1
2.001105112 0.1
#
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Link: http://lore.kernel.org/lkml/20190923233339.25326-3-andi@firstfloor.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The perf_sample struct definition and the event_attr_init() are in
util/event.h, but some places were getting it thru an otherwise needless
util/mmap.h header, fix it by including util/event.h directly.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-p1anwyjdbbvghrkl9dlxv7h5@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Further reducing the size of util/evsel.h.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-20zr7di9eynm0272mtjfdhfc@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Ditch it, noone is using it, one more stdio.h include in a hot header.
Fix the fallout in parse-events.y, where we end up using a FILE pointer,
I think due to YYDEBUG being set and in some places, like Amazon Linux 1
we don't get stdio.h included by luck, like in most other places, add a
explicit stdio.h include directive.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-37k5q0lhdbo2hvvfbnnzn7og@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We already had evsel_fprintf.c, add its counterpart, so that we can
reduce evsel.h a bit more.
We needed a new perf_event_attr_fprintf.c file so as to have a separate
object to link with the python binding in tools/perf/util/python-ext-sources
and not drag symbol_conf, etc into the python binding.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-06bdmt1062d9unzgqmxwlv88@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
So that we an later link it to the python binding without having to
drag the symbol object files.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-8823tveyasocnuoelq4qopwf@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Further reducing the util.c hodgepodge files.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-0i62zh7ok25znibyebgq0qs4@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
