IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
But we don't need to call it from outside the btree iterator code
anymore, since it's called by bch2_trans_begin() and
bch2_btree_path_traverse().
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
It shouldn't be necessary when we're only using a single iterator and
not doing updates, but that's harder to debug at the moment.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Now that peek_node()/next_node() are converted to return errors
directly, we don't need bch2_trans_exit() to return errors - it's
cleaner this way and wasn't used much anymore.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
This changes for_each_btree_node() to work like for_each_btree_key(),
and to that end bch2_btree_iter_peek_node() and next_node() also return
error ptrs.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
When force-removing a device, we were silently dropping extents that we
no longer had pointers for - we should have been switching them to
KEY_TYPE_error, so that reads for data that was lost return errors.
This patch adds the logic for switching a key to KEY_TYPE_error to
bch2_bkey_drop_ptr(), and improves the logic somewhat.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
It was switching off of the key type incorrectly - this code must've
been quite old, and not rereplicating anything that wasn't a
btree_ptr_v1 or a plain old extent.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
The data move path operates on existing extents, and not within a
subvolume as the regular IO paths do. It needs to change because it may
cause existing extents to be split, and when splitting an existing
extent in an ancestor snapshot we need to make sure the new split has
the same visibility in child snapshots as the existing extent.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
To implement snapshots, we need every filesystem btree operation (every
btree operation without a subvolume) to start by looking up the
subvolume and getting the current snapshot ID, with
bch2_subvolume_get_snapshot() - then, that snapshot ID is used for doing
btree lookups in BTREE_ITER_FILTER_SNAPSHOTS mode.
This patch adds those bch2_subvolume_get_snapshot() calls, and also
switches to passing around a subvol_inum instead of just an inode
number.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
This splits btree_iter into two components: btree_iter is now the
externally visible componont, and it points to a btree_path which is now
reference counted.
This means we no longer have to clone iterators up front if they might
be mutated - btree_path can be shared by multiple iterators, and cloned
if an iterator would mutate a shared btree_path. This will help us use
iterators more efficiently, as well as slimming down the main long lived
state in btree_trans, and significantly cleans up the logic for iterator
lifetimes.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
If an extent ends up with a replica that is encrypted an a replica that
isn't encrypted (due the user changing options), and then
copygc/rebalance moves one of the replicas by reading from the
unencrypted replica, we had a bug where we wouldn't correctly initialize
op->nonce - for each crc field in an extent, crc.offset + crc.nonce must
be equal.
This patch fixes that by moving op.nonce initialization to
bch2_migrate_write_init.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
BTREE_ITER_SET_POS_AFTER_COMMIT is used internally to automagically
advance extent btree iterators on sucessful commit.
But with the upcomnig btree_path patch it's getting more awkward to
support, and it adds overhead to core data structures that's only used
in a few places, and can be easily done by the caller instead.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
This adds progress stats to sysfs for copygc, rebalance, recovery, and the
cmd_job ioctls.
Signed-off-by: Brett Holman <bholman.devel@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Upcoming patch will require that a transaction restart is always
immediately followed by bch2_trans_begin().
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
On transaction restart iterators won't be locked anymore - make sure
we're always checking for errors.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
btree_trans should always be passed when we have one - iter->trans is
disfavoured. This mainly updates old code in btree_update_interior.c,
some of which predates btree_trans.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Internal btree code really wants a POS_MAX with all fields ~0; external
code more likely wants the snapshot field to be 0, because when we're
passing it to bch2_trans_get_iter() it's used for the snapshot we're
operating in, which should be 0 for most btrees that don't use
snapshots.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Upcoming refactoring is going to change bch2_trans_update() to start
returning transaction restarts.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
We already had op->end_io as an alternative mechanism to op->cl.parent
for delivering write completions; this switches all code paths to using
op->end_io.
Two reasons:
- op->end_io is more efficient, due to fewer atomic ops, this completes
the conversion that was originally only done for the direct IO path.
- We'll be restructing the write path to use a different mechanism for
punting to process context, refactoring to not use op->cl will make
that easier.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
This deletes bch_write_op.index_update_fn: indirect function calls have
gotten considerably more expensive post spectre/meltdown, and we only
have two different index_update_fns - this patch adds a flag to specify
which one to use (normal vs. data move path).
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
This will help avoid transaction restarts.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Since move.c isn't aware of what subvolume we're in, we can't use the
standard inode lookup code - fortunately, we're just using it for
reading IO options.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
The way btree iterators work internally has been changing, particularly
with the iter->real_pos changes, and bch2_btree_iter_next() is no longer
hyper optimized - it's just advance followed by peek, so it's more
efficient to just call advance where we're not using the return value of
bch2_btree_iter_next().
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
We keep running into occasional bugs with btree transaction iterators
overflowing - this will make those bugs more visible.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
In the read path, for retry of indirect extents to work we need to
differentiate between the location in the btree the read was for, vs.
the location where we found the data. This patch adds that plumbing to
bch_read_bio.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
This is to generate strings for them, so that we can print them out.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Having a packed format that can represent a field larger than the
unpacked type breaks bkey_packed_successor() assertions - we need to fix this to start using the snapshot filed.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
We dropped support for !BTREE_NODE_NEW_EXTENT_OVERWRITE but it turned
out there were people who still had filesystems with btree nodes in that
format in the wild. This adds a new compat feature that indicates we've
scanned for and rewritten nodes in the old format, and does that scan at
mount time if the option isn't set.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
This adds a new data job type to scan for btree nodes in the old extent
format, and rewrite them.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
With various newer key types - stripe keys, inline data extents - the
old approach of calculating the maximum size of the value is becoming
more and more error prone. Better to switch to bkey_on_stack, which can
dynamically allocate if necessary to handle any size bkey.
In particular we also want to get rid of BKEY_EXTENT_VAL_U64s_MAX.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Originally, we'd check for -ENOSPC when getting a disk reservation
whenever the new extent took up more space on disk than the old extent.
Erasure coding screwed this up, because with erasure coding writes are
initially replicated, and then in the background the extra replicas are
dropped when the stripe is created. This means that with erasure coding
enabled, writes will always take up more space on disk than the data
they're overwriting - but, according to posix, overwrites aren't
supposed to return ENOSPC.
So, in this patch we fudge things: if the new extent has more replicas
than the _effective_ replicas of the old extent, or if the old extent is
compressed and the new one isn't, we check for ENOSPC when getting the
disk reservation - otherwise, we don't.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Previously, we were using BTREE_INSERT_RESERVE in a lot of places where
it no longer makes sense.
- we now have more open_buckets than we used to, and the reserves work
better, so we shouldn't need to use BTREE_INSERT_RESERVE just because
we're holding open_buckets pinned anymore.
- We have the btree key cache for updates to the alloc btree, meaning
we no longer need the btree reserve to ensure the allocator can make
forward progress.
This means that we should only need a reserve for btree updates to
ensure that copygc can make forward progress.
Since it's now just for copygc, we can also fold RESERVE_BTREE into
RESERVE_MOVINGGC (the allocator's freelist reserve).
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
The move path was calling bch2_bucket_io_time_reset() for cached
pointers (which it shouldn't have been), and then not calling
bch2_trans_reset() when it got -EINTR (indicating transaction restart).
Oops.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
With the btree key cache code, we don't need to update the alloc btree
lazily - and this will mean we can remove the bch2_alloc_write() call in
the shutdown path.
Future work: we really need to expend the bucket IO clocks from 16 to 64
bits, so that we don't have to rescale them.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
The check for when we need to get a disk reservation was wrong.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
This no longer makes any sense, since copygc is now one thread per
filesystem, not per device, with a single write point.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
This will help narrow down which code is at fault when this happens.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
We now update the alloc info (bucket sector counts) atomically with
journalling the update to the interior btree nodes, and we also set new
btree roots atomically with the journalled part of the btree update.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
peek_slot() shouldn't return -EINTR when there's only a single live
iterator, but that's tricky to guarantee - we seem to be returning
-EINTR when we shouldn't, but it's easy enough to handle in the caller.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
This fixes the background_compression option: wihout some way of marking
data as incompressible, rebalance will keep rewriting incompressible
data over and over.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
The trigger flags really belong with individual btree_insert_entries,
not the transaction commit flags - this splits out those flags and
unifies them with the BCH_BUCKET_MARK flags. Todo - split out
btree_trigger.c from buckets.c
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
