IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
Add ipip6 and ip6ip decap support for bpf_skb_adjust_room().
Main use case is for using cls_bpf on ingress hook to decapsulate
IPv4 over IPv6 and IPv6 over IPv4 tunnel packets.
Add two new flags BPF_F_ADJ_ROOM_DECAP_L3_IPV{4,6} to indicate the
new IP header version after decapsulating the outer IP header.
Suggested-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Ziyang Xuan <william.xuanziyang@huawei.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://lore.kernel.org/r/b268ec7f0ff9431f4f43b1b40ab856ebb28cb4e1.1673574419.git.william.xuanziyang@huawei.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
If CONFIG_DEFERRED_STRUCT_PAGE_INIT is enabled, memblock_free_pages()
only releases pages to the buddy allocator if they are not in the
deferred range. This is correct for free pages (as defined by
for_each_free_mem_pfn_range_in_zone()) because free pages in the
deferred range will be initialized and released as part of the deferred
init process. memblock_free_pages() is called by memblock_free_late(),
which is used to free reserved ranges after memblock_free_all() has
run. All pages in reserved ranges have been initialized at that point,
and accordingly, those pages are not touched by the deferred init
process. This means that currently, if the pages that
memblock_free_late() intends to release are in the deferred range, they
will never be released to the buddy allocator. They will forever be
reserved.
In addition, memblock_free_pages() calls kmsan_memblock_free_pages(),
which is also correct for free pages but is not correct for reserved
pages. KMSAN metadata for reserved pages is initialized by
kmsan_init_shadow(), which runs shortly before memblock_free_all().
For both of these reasons, memblock_free_pages() should only be called
for free pages, and memblock_free_late() should call __free_pages_core()
directly instead.
One case where this issue can occur in the wild is EFI boot on
x86_64. The x86 EFI code reserves all EFI boot services memory ranges
via memblock_reserve() and frees them later via memblock_free_late()
(efi_reserve_boot_services() and efi_free_boot_services(),
respectively). If any of those ranges happens to fall within the
deferred init range, the pages will not be released and that memory will
be unavailable.
For example, on an Amazon EC2 t3.micro VM (1 GB) booting via EFI:
v6.2-rc2:
Node 0, zone DMA
spanned 4095
present 3999
managed 3840
Node 0, zone DMA32
spanned 246652
present 245868
managed 178867
v6.2-rc2 + patch:
Node 0, zone DMA
spanned 4095
present 3999
managed 3840
Node 0, zone DMA32
spanned 246652
present 245868
managed 222816 # +43,949 pages
-----BEGIN PGP SIGNATURE-----
iQFEBAABCgAuFiEEeOVYVaWZL5900a/pOQOGJssO/ZEFAmPCrI8QHHJwcHRAa2Vy
bmVsLm9yZwAKCRA5A4Ymyw79kT1lB/wPbLpePLzZfDGyV/NR9gi4FuJiaRfhlklV
rbxnJce050GERbSQoF/r4zrxn2pzvIWGMh1xWZBGi/q8mT2rOIYtVqUahY9YuL/Z
7+xqdCOALIxEj+cXqYocqp8/NFgUWLGuMoomc9lWvEkUs+zOvkD8Z/bRecfPYvOa
BftPALmtXgx46Ecce0gZvvh4YULpVLNdDPPiwZTabV+47Cl8+cJ0Y+iEHsUfOesU
hQG0unWJH77O3IU4QxiirLekLP/6a5O5f0W7u3PZmNNv7N+UdwE+De+QF0aamfgA
LZDO1qOakflegFZvK0JchCzS4hc6dtRKqIvNM3cCBMXLvV4REHKP
=geNh
-----END PGP SIGNATURE-----
Merge tag 'fixes-2023-01-14' of git://git.kernel.org/pub/scm/linux/kernel/git/rppt/memblock
Pull memblock fix from Mike Rapoport:
"memblock: always release pages to the buddy allocator in
memblock_free_late()
If CONFIG_DEFERRED_STRUCT_PAGE_INIT is enabled, memblock_free_pages()
only releases pages to the buddy allocator if they are not in the
deferred range. This is correct for free pages (as defined by
for_each_free_mem_pfn_range_in_zone()) because free pages in the
deferred range will be initialized and released as part of the
deferred init process.
memblock_free_pages() is called by memblock_free_late(), which is used
to free reserved ranges after memblock_free_all() has run. All pages
in reserved ranges have been initialized at that point, and
accordingly, those pages are not touched by the deferred init process.
This means that currently, if the pages that memblock_free_late()
intends to release are in the deferred range, they will never be
released to the buddy allocator. They will forever be reserved.
In addition, memblock_free_pages() calls kmsan_memblock_free_pages(),
which is also correct for free pages but is not correct for reserved
pages. KMSAN metadata for reserved pages is initialized by
kmsan_init_shadow(), which runs shortly before memblock_free_all().
For both of these reasons, memblock_free_pages() should only be called
for free pages, and memblock_free_late() should call
__free_pages_core() directly instead.
One case where this issue can occur in the wild is EFI boot on x86_64.
The x86 EFI code reserves all EFI boot services memory ranges via
memblock_reserve() and frees them later via memblock_free_late()
(efi_reserve_boot_services() and efi_free_boot_services(),
respectively).
If any of those ranges happens to fall within the deferred init range,
the pages will not be released and that memory will be unavailable.
For example, on an Amazon EC2 t3.micro VM (1 GB) booting via EFI:
v6.2-rc2:
Node 0, zone DMA
spanned 4095
present 3999
managed 3840
Node 0, zone DMA32
spanned 246652
present 245868
managed 178867
v6.2-rc2 + patch:
Node 0, zone DMA
spanned 4095
present 3999
managed 3840
Node 0, zone DMA32
spanned 246652
present 245868
managed 222816 # +43,949 pages"
* tag 'fixes-2023-01-14' of git://git.kernel.org/pub/scm/linux/kernel/git/rppt/memblock:
mm: Always release pages to the buddy allocator in memblock_free_late().
MPTCP protocol supports having subflows in both IPv4 and IPv6. In Linux,
it is possible to have that if the MPTCP socket has been created with
AF_INET6 family without the IPV6_V6ONLY option.
Here, a new IPv4 subflow is being added to the initial IPv6 connection,
then being removed using Netlink commands.
Cc: stable@vger.kernel.org # v5.19+
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add the missing space after 'dest' variable assignment.
This change will resolve the following checkpatch.pl
script error:
ERROR: spaces required around that '+=' (ctx:VxW)
Signed-off-by: Roberto Valenzuela <valenzuelarober@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20230113180257.39769-1-valenzuelarober@gmail.com
'.' is not allowed in the event name of kprobe. Therefore, we will get a
EINVAL if the kernel function name has a '.' in legacy kprobe attach
case, such as 'icmp_reply.constprop.0'.
In order to adapt this case, we need to replace the '.' with other char
in gen_kprobe_legacy_event_name(). And I use '_' for this propose.
Signed-off-by: Menglong Dong <imagedong@tencent.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Reviewed-by: Alan Maguire <alan.maguire@oracle.com>
Link: https://lore.kernel.org/bpf/20230113093427.1666466-1-imagedong@tencent.com
When the clang toolchain has stack protection enabled in order to be
consistent with gcc - which just happens to be the case on Gentoo -
the bpftool build fails:
[...]
clang \
-I. \
-I/tmp/portage/dev-util/bpftool-6.0.12/work/linux-6.0/tools/include/uapi/ \
-I/tmp/portage/dev-util/bpftool-6.0.12/work/linux-6.0/tools/bpf/bpftool/bootstrap/libbpf/include \
-g -O2 -Wall -target bpf -c skeleton/pid_iter.bpf.c -o pid_iter.bpf.o
clang \
-I. \
-I/tmp/portage/dev-util/bpftool-6.0.12/work/linux-6.0/tools/include/uapi/ \
-I/tmp/portage/dev-util/bpftool-6.0.12/work/linux-6.0/tools/bpf/bpftool/bootstrap/libbpf/include \
-g -O2 -Wall -target bpf -c skeleton/profiler.bpf.c -o profiler.bpf.o
skeleton/profiler.bpf.c:40:14: error: A call to built-in function '__stack_chk_fail' is not supported.
int BPF_PROG(fentry_XXX)
^
skeleton/profiler.bpf.c:94:14: error: A call to built-in function '__stack_chk_fail' is not supported.
int BPF_PROG(fexit_XXX)
^
2 errors generated.
[...]
Since stack-protector makes no sense for the BPF bits just unconditionally
disable it.
Bug: https://bugs.gentoo.org/890638
Signed-off-by: Holger Hoffstätte <holger@applied-asynchrony.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Quentin Monnet <quentin@isovalent.com>
Link: https://lore.kernel.org/bpf/74cd9d2e-6052-312a-241e-2b514a75c92c@applied-asynchrony.com
drivers/net/usb/r8152.c
be53771c87f4 ("r8152: add vendor/device ID pair for Microsoft Devkit")
ec51fbd1b8a2 ("r8152: add USB device driver for config selection")
https://lore.kernel.org/all/20230113113339.658c4723@canb.auug.org.au/
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Current release - regressions:
- rxrpc:
- only disconnect calls in the I/O thread
- move client call connection to the I/O thread
- fix incoming call setup race
- eth: mlx5:
- restore pkt rate policing support
- fix memory leak on updating vport counters
Previous releases - regressions:
- gro: take care of DODGY packets
- ipv6: deduct extension header length in rawv6_push_pending_frames
- tipc: fix unexpected link reset due to discovery messages
Previous releases - always broken:
- sched: disallow noqueue for qdisc classes
- eth: ice: fix potential memory leak in ice_gnss_tty_write()
- eth: ixgbe: fix pci device refcount leak
- eth: mlx5:
- fix command stats access after free
- fix macsec possible null dereference when updating MAC security entity (SecY)
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQJGBAABCAAwFiEEg1AjqC77wbdLX2LbKSR5jcyPE6QFAmPAGskSHHBhYmVuaUBy
ZWRoYXQuY29tAAoJECkkeY3MjxOk9aQQAInUtOfTi0EwR5oveTMWOcDc8P1rGFru
Yfid6d4gVRKDm9tosW8HSlnMVCDIGrvhmwVfMevkLjgQtgRXYecXM7MYMVH+6f6e
yIF0azu5z2PEQvfTLTuTN++bQ3lgyfYXOB3mScCOtBE9BFXwjtL111Qby1QlvHTg
sPIH5kCxpDfg3i2rge1BiyoQ4BWc4c6Us86CriKDX1vl7lilJccpWYxKFY8hyRzl
PF3OVJlMph7jny4zKOa2chWUnDj5ycK289/x2rOla4EOX7R8IHDyL+sAAAvdm7/q
FDuuetC3M+eo8/NTLiZkjTipw1nO+G0c1VtzAZ/wX1QkomwmN0yyPx47EllVH+ez
YQ80UrXOF3f7xYXHZIhwCrIVSaHpLyZHSfDBW1r+vTokIRSJ+5TOIH/YAUUKSR0U
kE4r+eHU3AdcBsDV0pZXtE0mUxROwRatOt5u+XQ3WYdORDyKo0HYu8QskIurgqUv
Cnr554zogmC4Bt/uY7j5u9NvhUH/Xyp5RVXtaQnwz+hcncgVFASDDpblejHE2Lcu
8fb1NrwB7AsPnMDGUSjnG0BbQaTo6ccacBrIrhWxRbEBAQmZEbO507yoYz21EBM5
5XKWd1bTq1YG5oPYl9WR3FI9hSQN7vKsUoW4SXsuh5j65ENhCAwBK8i3liy1j+dS
sf5xUgCg6KyH
=4ANJ
-----END PGP SIGNATURE-----
Merge tag 'net-6.2-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from rxrpc.
The rxrpc changes are noticeable large: to address a recent regression
has been necessary completing the threaded refactor.
Current release - regressions:
- rxrpc:
- only disconnect calls in the I/O thread
- move client call connection to the I/O thread
- fix incoming call setup race
- eth: mlx5:
- restore pkt rate policing support
- fix memory leak on updating vport counters
Previous releases - regressions:
- gro: take care of DODGY packets
- ipv6: deduct extension header length in rawv6_push_pending_frames
- tipc: fix unexpected link reset due to discovery messages
Previous releases - always broken:
- sched: disallow noqueue for qdisc classes
- eth: ice: fix potential memory leak in ice_gnss_tty_write()
- eth: ixgbe: fix pci device refcount leak
- eth: mlx5:
- fix command stats access after free
- fix macsec possible null dereference when updating MAC security
entity (SecY)"
* tag 'net-6.2-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (64 commits)
r8152: add vendor/device ID pair for Microsoft Devkit
net: stmmac: add aux timestamps fifo clearance wait
bnxt: make sure we return pages to the pool
net: hns3: fix wrong use of rss size during VF rss config
ipv6: raw: Deduct extension header length in rawv6_push_pending_frames
net: lan966x: check for ptp to be enabled in lan966x_ptp_deinit()
net: sched: disallow noqueue for qdisc classes
iavf/iavf_main: actually log ->src mask when talking about it
igc: Fix PPS delta between two synchronized end-points
ixgbe: fix pci device refcount leak
octeontx2-pf: Fix resource leakage in VF driver unbind
selftests/net: l2_tos_ttl_inherit.sh: Ensure environment cleanup on failure.
selftests/net: l2_tos_ttl_inherit.sh: Run tests in their own netns.
selftests/net: l2_tos_ttl_inherit.sh: Set IPv6 addresses with "nodad".
net/mlx5e: Fix macsec possible null dereference when updating MAC security entity (SecY)
net/mlx5e: Fix macsec ssci attribute handling in offload path
net/mlx5: E-switch, Coverity: overlapping copy
net/mlx5e: Don't support encap rules with gbp option
net/mlx5: Fix ptp max frequency adjustment range
net/mlx5e: Fix memory leak on updating vport counters
...
that uses non-function symbols in executable sections.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=bMbY
-----END PGP SIGNATURE-----
Merge tag 'core-urgent-2023-01-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull objtool fix from Ingo Molnar:
- Fix objtool to be more permissive with hand-written assembly that
uses non-function symbols in executable sections.
* tag 'core-urgent-2023-01-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
objtool: Tolerate STT_NOTYPE symbols at end of section
This series addresses the following bugs:
o The fd_set structure was incorrectly defined as arrays of u32
instead of long, which breaks BE64. Fix courtesy of Sven Schnelle.
o S_ISxxx macros were incorrectly testing the bits after applying
them instead of bitwise ANDing S_FMT with the value. Fix from
Warner Losh.
o The mips code was randomly broken due to an unprotected
"noreorder" directive in the _start code that could prevent the
assembler from filling delayed slots. This in turn resulted
in random other instructions being placed into those slots.
Fix courtesy of Willy Tarreau.
o The current nolibc header layout refrains from including files
that are not explicitly included by the code using nolibc.
Unfortunately, this causes build failures when such files
contain definitions that are used (for example) by libgcc.
Example definitions include raise() and memset(), which are called
by some architectures, but only at certain optimization levels.
Fix courtesy of Willy Tarreau.
o gcc 11.3 in ARM thumb2 mode at -O2 recognized a memset()
construction inside the memset() definition. The compiler
replaced this construction with a call to... memset(). Userland
cannot be forced to build with -ffreestanding, so an empty asm()
statement was introduced into the loop the loop in order to
prevent the compiler from making this unproductive transformation.
Fix courtesy of Willy Tarreau.
o Most of the O_* macros were wrong on RISCV because their
octal values were coded as hexadecimal. This resulted in the
getdents64() selftest failing. Fix courtesy of Willy Tarreau.
The series was tested on x86_64, i386, armv5, armv7, thumb1, thumb2,
mips and riscv, all at -O0, -Os and -O3.
-----BEGIN PGP SIGNATURE-----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=bR/q
-----END PGP SIGNATURE-----
Merge tag 'urgent-nolibc.2023.01.09a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu
Pull nolibc fixes from Paul McKenney:
- The fd_set structure was incorrectly defined as arrays of u32 instead
of long, which breaks BE64. Fix courtesy of Sven Schnelle.
- S_ISxxx macros were incorrectly testing the bits after applying them
instead of bitwise ANDing S_FMT with the value. Fix from Warner Losh.
- The mips code was randomly broken due to an unprotected "noreorder"
directive in the _start code that could prevent the assembler from
filling delayed slots. This in turn resulted in random other
instructions being placed into those slots. Fix courtesy of Willy
Tarreau.
- The current nolibc header layout refrains from including files that
are not explicitly included by the code using nolibc. Unfortunately,
this causes build failures when such files contain definitions that
are used (for example) by libgcc. Example definitions include raise()
and memset(), which are called by some architectures, but only at
certain optimization levels. Fix courtesy of Willy Tarreau.
- gcc 11.3 in ARM thumb2 mode at -O2 recognized a memset() construction
inside the memset() definition. The compiler replaced this
construction with a call to... memset(). Userland cannot be forced to
build with -ffreestanding, so an empty asm() statement was introduced
into the loop the loop in order to prevent the compiler from making
this unproductive transformation. Fix courtesy of Willy Tarreau.
- Most of the O_* macros were wrong on RISCV because their octal values
were coded as hexadecimal. This resulted in the getdents64() selftest
failing. Fix courtesy of Willy Tarreau.
This was tested on x86_64, i386, armv5, armv7, thumb1, thumb2, mips and
riscv, all at -O0, -Os and -O3.
* tag 'urgent-nolibc.2023.01.09a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu:
tools/nolibc: fix the O_* fcntl/open macro definitions for riscv
tools/nolibc: prevent gcc from making memset() loop over itself
tools/nolibc: fix missing includes causing build issues at -O0
tools/nolibc: restore mips branch ordering in the _start block
tools/nolibc: Fix S_ISxxx macros
nolibc: fix fd_set type
We are missing a ) when we attempt to complain about not having enough
configuration for clang, resulting in the rather inscrutable error:
../lib.mk:23: *** unterminated call to function 'error': missing ')'. Stop.
Add the required ) so we print the message we were trying to print.
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
This adds test for sending message, bigger than peer's buffer size.
For SOCK_SEQPACKET socket it must fail, as this type of socket has
message size limit.
Signed-off-by: Arseniy Krasnov <AVKrasnov@sberdevices.ru>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
This updates message bound test making it more complex. Instead of
sending 1 bytes messages with one MSG_EOR bit, it sends messages of
random length(one half of messages are smaller than page size, second
half are bigger) with random number of MSG_EOR bits set. Receiver
also don't know total number of messages.
Signed-off-by: Arseniy Krasnov <AVKrasnov@sberdevices.ru>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Implement automatic switching of XDP programs and execution modes if
needed by a test. This makes it much simpler to write a test as it
only has to say what XDP program it needs if it is not the default
one. This also makes it possible to remove the initial explicit
attachment of the XDP program as well as the explicit mode switch in
the code. These are now handled by the same code that just checks if a
switch is necessary, so no special cases are needed.
The default XDP program for all tests is one that sends all packets to
the AF_XDP socket. If you need another one, please use the new
function test_spec_set_xdp_prog() to specify what XDP programs and
maps to use for this test.
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Acked-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Link: https://lore.kernel.org/r/20230111093526.11682-16-magnus.karlsson@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Automatically restore the default packet stream if needed at the end
of each test. This so that test writers do not forget to do this.
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Acked-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Link: https://lore.kernel.org/r/20230111093526.11682-15-magnus.karlsson@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Make the thread dispatching code common by unifying the dual and
single thread dispatcher code. This so we do not have to add code in
two places in upcoming commits.
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Acked-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Link: https://lore.kernel.org/r/20230111093526.11682-14-magnus.karlsson@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Add a new test where some of the packets are not passed to the AF_XDP
socket and instead get a XDP_DROP verdict. This is important as it
tests the recycling mechanism of the buffer pool. If a packet is not
sent to the AF_XDP socket, the buffer the packet resides in is instead
recycled so it can be used again without the round-trip to user
space. The test introduces a new XDP program that drops every other
packet.
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Acked-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Link: https://lore.kernel.org/r/20230111093526.11682-13-magnus.karlsson@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Get rid of the built-in XDP program that was part of the old libbpf
code in xsk.c and replace it with an eBPF program build using the
framework by all the other bpf selftests. This will form the base for
adding more programs in later commits.
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Acked-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Link: https://lore.kernel.org/r/20230111093526.11682-12-magnus.karlsson@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Remove unnecessary code in the control path. This is located in the
file xsk.c that was moved from libbpf when the xsk support there was
deprecated. Some of the code there is not needed anymore as the
selftests are only guaranteed to run on the kernel it is shipped
with. Therefore, all the code that has to deal with compatibility of
older kernels can be dropped and also any other function that is not
of any use for the tests.
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Acked-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Link: https://lore.kernel.org/r/20230111093526.11682-11-magnus.karlsson@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Load and attach the XDP program only once per XDP mode that is being
executed. Today, the XDP program is loaded and attached for every
test, then unloaded, which takes a long time on real NICs, since they
have to reconfigure their HW, in contrast to veth. The test suite now
completes in 21 seconds, instead of 207 seconds previously on my
machine. This is a speed-up of around 10x.
This is accomplished by moving the XDP loading from the worker threads
to the main thread and replacing the XDP loading interfaces of xsk.c
that was taken from the xsk support in libbpf, with something more
explicit that is more useful for these tests. Instead, the relevant
file descriptors and ifindexes are just passed down to the new
functions.
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Acked-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Link: https://lore.kernel.org/r/20230111093526.11682-10-magnus.karlsson@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Remove the namespaces used as they fill no function. This will
simplify the code for speeding up the tests in the following commits.
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Acked-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Link: https://lore.kernel.org/r/20230111093526.11682-9-magnus.karlsson@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Replace our own homegrown assembly store/release and load/acquire
implementations with the HW agnositic atomic APIs C11 offers. This to
make the code more portable, easier to read, and reduce the
maintenance burden.
The original code used load-acquire and store-release barriers
hand-coded in assembly. Since C11, these kind of operations are
offered as built-ins in gcc and llvm. The load-acquire operation
prevents hoisting of non-atomic memory operations to before this
operation and it corresponds to the __ATOMIC_ACQUIRE operation in the
built-in atomics. The store-release operation prevents hoisting of
non-atomic memory operations to after this operation and it
corresponds to the __ATOMIC_RELEASE operation in the built-in atomics.
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Acked-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Link: https://lore.kernel.org/r/20230111093526.11682-8-magnus.karlsson@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Add a new option to the test_xsk.sh script that only creates the two
veth netdevs and the extra namespace, then exits without running any
tests. The failed test can then be executed in the debugger without
having to create the netdevs and namespace manually. For ease-of-use,
the veth netdevs to use are printed so they can be copied into the
debugger.
Here is an example how to use it:
> sudo ./test_xsk.sh -d
veth10 veth11
> gdb xskxceiver
In gdb:
run -i veth10 -i veth11
And now the test cases can be debugged with gdb.
If you want to debug the test suite on a real NIC in loopback mode,
there is no need to use this feature as you already know the netdev of
your NIC.
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Acked-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Link: https://lore.kernel.org/r/20230111093526.11682-7-magnus.karlsson@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Print the correct error codes when exiting the test suite due to some
terminal error. Some of these had a switched sign and some of them
printed zero instead of errno.
Fixes: facb7cb2e909 ("selftests/bpf: Xsk selftests - SKB POLL, NOPOLL")
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Acked-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Link: https://lore.kernel.org/r/20230111093526.11682-5-magnus.karlsson@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Submit the correct number of frames in the function
xsk_populate_fill_ring(). For the tests that set the flag
use_addr_for_fill, uninitialized buffers were sent to the fill ring
following the correct ones. This has no impact on the tests, since
they only use the ones that were initialized. But for correctness,
this should be fixed.
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Acked-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Link: https://lore.kernel.org/r/20230111093526.11682-4-magnus.karlsson@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Do not close descriptors that have never been used. File descriptor
fields that are not in use are erroneously marked with the number 0,
which is a valid fd. Mark unused fds with -1 instead and do not close
these when deleting the socket.
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Acked-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Link: https://lore.kernel.org/r/20230111093526.11682-3-magnus.karlsson@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Print the correct payload when the packet dump option is selected. The
network to host conversion was forgotten and the payload was
erronously declared to be an int instead of an unsigned int.
Fixes: facb7cb2e909 ("selftests/bpf: Xsk selftests - SKB POLL, NOPOLL")
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Acked-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Link: https://lore.kernel.org/r/20230111093526.11682-2-magnus.karlsson@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
vsyscall detection code uses direct call to the beginning of
the vsyscall page:
asm ("call %P0" :: "i" (0xffffffffff600000))
It generates "call rel32" instruction but it is not relocated if binary
is PIE, so binary segfaults into random userspace address and vsyscall
page status is detected incorrectly.
Do more direct:
asm ("call *%rax")
which doesn't do need any relocaltions.
Mark g_vsyscall as volatile for a good measure, I didn't find instruction
setting it to 0. Now the code is obviously correct:
xor eax, eax
mov rdi, rbp
mov rsi, rbp
mov DWORD PTR [rip+0x2d15], eax # g_vsyscall = 0
mov rax, 0xffffffffff600000
call rax
mov DWORD PTR [rip+0x2d02], 1 # g_vsyscall = 1
mov eax, DWORD PTR ds:0xffffffffff600000
mov DWORD PTR [rip+0x2cf1], 2 # g_vsyscall = 2
mov edi, [rip+0x2ceb] # exit(g_vsyscall)
call exit
Note: fixed proc-empty-vm test oopses 5.19.0-28-generic kernel
but this is separate story.
Link: https://lkml.kernel.org/r/Y7h2xvzKLg36DSq8@p183
Fixes: 5bc73bb3451b9 ("proc: test how it holds up with mapping'less process")
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Reported-by: Mirsad Goran Todorovac <mirsad.todorovac@alu.unizg.hr>
Tested-by: Mirsad Goran Todorovac <mirsad.todorovac@alu.unizg.hr>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The kselftest framework uses a default timeout of 45 seconds for
all test scripts.
Increase the timeout to two minutes for the netfilter tests, this
should hopefully be enough,
Make sure that, should the script be canceled, the net namespace and
the spawned ping instances are removed.
Fixes: 25d8bcedbf43 ("selftests: add script to stress-test nft packet path vs. control plane")
Reported-by: Mirsad Goran Todorovac <mirsad.todorovac@alu.unizg.hr>
Signed-off-by: Florian Westphal <fw@strlen.de>
Tested-by: Mirsad Goran Todorovac <mirsad.todorovac@alu.unizg.hr>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
When a match has been made to the nth duplicate symbol, return
success not error.
Example:
Before:
$ cat file.c
cat: file.c: No such file or directory
$ cat file1.c
#include <stdio.h>
static void func(void)
{
printf("First func\n");
}
void other(void);
int main()
{
func();
other();
return 0;
}
$ cat file2.c
#include <stdio.h>
static void func(void)
{
printf("Second func\n");
}
void other(void)
{
func();
}
$ gcc -Wall -Wextra -o test file1.c file2.c
$ perf record -e intel_pt//u --filter 'filter func @ ./test' -- ./test
Multiple symbols with name 'func'
#1 0x1149 l func
which is near main
#2 0x1179 l func
which is near other
Disambiguate symbol name by inserting #n after the name e.g. func #2
Or select a global symbol by inserting #0 or #g or #G
Failed to parse address filter: 'filter func @ ./test'
Filter format is: filter|start|stop|tracestop <start symbol or address> [/ <end symbol or size>] [@<file name>]
Where multiple filters are separated by space or comma.
$ perf record -e intel_pt//u --filter 'filter func #2 @ ./test' -- ./test
Failed to parse address filter: 'filter func #2 @ ./test'
Filter format is: filter|start|stop|tracestop <start symbol or address> [/ <end symbol or size>] [@<file name>]
Where multiple filters are separated by space or comma.
After:
$ perf record -e intel_pt//u --filter 'filter func #2 @ ./test' -- ./test
First func
Second func
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.016 MB perf.data ]
$ perf script --itrace=b -Ftime,flags,ip,sym,addr --ns
1231062.526977619: tr strt 0 [unknown] => 558495708179 func
1231062.526977619: tr end call 558495708188 func => 558495708050 _init
1231062.526979286: tr strt 0 [unknown] => 55849570818d func
1231062.526979286: tr end return 55849570818f func => 55849570819d other
Fixes: 1b36c03e356936d6 ("perf record: Add support for using symbols in address filters")
Reported-by: Dmitrii Dolgov <9erthalion6@gmail.com>
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Tested-by: Dmitry Dolgov <9erthalion6@gmail.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20230110185659.15979-1-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
As BPF_F_MMAPABLE flag is now conditionnaly set (by map_is_mmapable),
it should not be toggled but disabled if not supported by kernel.
Fixes: 4fcac46c7e10 ("libbpf: only add BPF_F_MMAPABLE flag for data maps with global vars")
Signed-off-by: Ludovic L'Hours <ludovic.lhours@gmail.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/r/20230108182018.24433-1-ludovic.lhours@gmail.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
When bpftool feature does not find kernel config
files under default path or wrong format,
do not output CONFIG_XYZ is not set.
Skip kernel config check and continue.
Signed-off-by: Chethan Suresh <chethan.suresh@sony.com>
Signed-off-by: Kenta Tada <Kenta.Tada@sony.com>
Acked-by: Quentin Monnet <quentin@isovalent.com>
Link: https://lore.kernel.org/r/20230109023742.29657-1-chethan.suresh@sony.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
When passing compiler variables like CC=$(HOSTCC) to a submake
we must ensure the variable is quoted in order to handle cases
where $(HOSTCC) may be multiple binaries.
For example when using ccache $HOSTCC may be:
"/usr/bin/ccache /usr/bin/gcc"
If we pass CC without quotes like CC=$(HOSTCC) only the first
"/usr/bin/ccache" part will be assigned to the CC variable which
will cause an error due to dropping the "/usr/bin/gcc" part of
the variable in the submake invocation.
This fixes errors such as:
/usr/bin/ccache: invalid option -- 'd'
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Quentin Monnet <quentin@isovalent.com>
Link: https://lore.kernel.org/bpf/20230110014504.3120711-1-james.hilliard1@gmail.com
In 746bd29e348f99b4 ("perf build: Use tools/lib headers from install
path") we stopped having the tools/lib/ directory from the kernel
sources in the header include path unconditionally, which breaks the
build on systems with older versions of libbpf-devel, in this case 0.7.0
as some of the structures and function declarations present in the newer
version of libbpf included in the kernel sources (tools/lib/bpf) are not
anymore used, just the ones in the system libbpf.
So instead of trying to provide alternative functions when the
libbpf-bpf_program__set_insns feature test fails, fail a
LIBBPF_DYNAMIC=1 build (requesting the use of the system's libbpf) and
emit this build error message:
$ make LIBBPF_DYNAMIC=1 -C tools/perf
Makefile.config:593: *** Error: libbpf devel library needs to be >= 0.8.0 to build with LIBBPF_DYNAMIC, update or build statically with the version that comes with the kernel sources. Stop.
$
For v6.3 these tests will be revamped and we'll require libbpf 1.0 as a
minimal version for using LIBBPF_DYNAMIC=1, most distros should have it
by now or at v6.3 time.
Fixes: 746bd29e348f99b4 ("perf build: Use tools/lib headers from install path")
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/CAP-5=fVa51_URGsdDFVTzpyGmdDRj_Dj2EKPuDHNQ0BYgMSzUA@mail.gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The $(LIBBPF) target should only be a dependency of prepare if the
static version of libbpf is needed. Add a new LIBBPF_STATIC variable
that is set by Makefile.config. Use LIBBPF_STATIC to determine whether
the CFLAGS, etc. need updating and for adding $(LIBBPF) as a prepare
dependency.
As Makefile.config isn't loaded for "clean" as a target, always set
LIBBPF_OUTPUT regardless of whether it is needed for $(LIBBPF). This
is done to minimize conditional logic for $(LIBBPF)-clean.
This issue and an original fix was reported by Mike Leach in:
https://lore.kernel.org/lkml/20230105172243.7238-1-mike.leach@linaro.org/
Fixes: 746bd29e348f99b4 ("perf build: Use tools/lib headers from install path")
Reported-by: Mike Leach <mike.leach@linaro.org>
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: bpf@vger.kernel.org
Cc: Ian Rogers <irogers@google.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20230106151320.619514-2-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
While doing 'make -C tools/perf build-test' one can notice error
messages while trying to install libtraceevent plugins, stop doing that
as libtraceevent isn't anymore a homie.
These are the warnings dealt with:
make_install_prefix_slash_O: make install prefix=/tmp/krava/
failed to find: /tmp/krava/etc/bash_completion.d/perf
failed to find: /tmp/krava/lib64/traceevent/plugins/plugin_cfg80211.so
failed to find: /tmp/krava/lib64/traceevent/plugins/plugin_scsi.so
failed to find: /tmp/krava/lib64/traceevent/plugins/plugin_xen.so
failed to find: /tmp/krava/lib64/traceevent/plugins/plugin_function.so
failed to find: /tmp/krava/lib64/traceevent/plugins/plugin_sched_switch.so
failed to find: /tmp/krava/lib64/traceevent/plugins/plugin_mac80211.so
failed to find: /tmp/krava/lib64/traceevent/plugins/plugin_kvm.so
failed to find: /tmp/krava/lib64/traceevent/plugins/plugin_kmem.so
failed to find: /tmp/krava/lib64/traceevent/plugins/plugin_hrtimer.so
failed to find: /tmp/krava/lib64/traceevent/plugins/plugin_jbd2.so
Fixes: 4171925aa9f3f7bf ("tools lib traceevent: Remove libtraceevent")
Acked-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lore.kernel.org/lkml/Y7xXz+TSpiCbQGjw@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Commit 11e9734bcb6a7361 ("mm/slab_common: unify NUMA and UMA version of
tracepoints") adds the field "node" into the tracepoints 'kmalloc' and
'kmem_cache_alloc', so this patch modifies the event process function to
support the field "node".
If field "node" is detected by checking function evsel__field(), it
stats the cross allocation.
When the "node" value is NUMA_NO_NODE (-1), it means the memory can be
allocated from any memory node, in this case, we don't account it as a
cross allocation.
Fixes: 11e9734bcb6a7361 ("mm/slab_common: unify NUMA and UMA version of tracepoints")
Reported-by: Ravi Bangoria <ravi.bangoria@amd.com>
Reviewed-by: James Clark <james.clark@arm.com>
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Link: https://lore.kernel.org/r/20230108062400.250690-2-leo.yan@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Commit 11e9734bcb6a7361 ("mm/slab_common: unify NUMA and UMA version of
tracepoints") removed tracepoints 'kmalloc_node' and
'kmem_cache_alloc_node', we need to consider the tool should be backward
compatible.
If it detect the tracepoint "kmem:kmalloc_node", this patch enables the
legacy tracepoints, otherwise, it will ignore them.
Fixes: 11e9734bcb6a7361 ("mm/slab_common: unify NUMA and UMA version of tracepoints")
Reported-by: Ravi Bangoria <ravi.bangoria@amd.com>
Reviewed-by: James Clark <james.clark@arm.com>
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Link: https://lore.kernel.org/r/20230108062400.250690-1-leo.yan@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Including libbpf header files should be guarded by HAVE_LIBBPF_SUPPORT.
In bpf_counter.h, move the skeleton utilities under HAVE_BPF_SKEL.
Fixes: d6a735ef3277c45f ("perf bpf_counter: Move common functions to bpf_counter.h")
Reported-by: Mike Leach <mike.leach@linaro.org>
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Tested-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Mike Leach <mike.leach@linaro.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20230105172243.7238-1-mike.leach@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Use 'set -e' and an exit handler to stop the script if a command fails
and ensure the test environment is cleaned up in any case. Also, handle
the case where the script is interrupted by SIGINT.
The only command that's expected to fail is 'wait $ping_pid', since
it's killed by the script. Handle this case with '|| true' to make it
play well with 'set -e'.
Finally, return the Kselftest SKIP code (4) when the script breaks
because of an environment problem or a command line failure. The 0 and
1 return codes should now reliably indicate that all tests have been
run (0: all tests run and passed, 1: all tests run but at least one
failed, 4: test script didn't run completely).
Fixes: b690842d12fd ("selftests/net: test l2 tunnel TOS/TTL inheriting")
Reported-by: Mirsad Goran Todorovac <mirsad.todorovac@alu.unizg.hr>
Tested-by: Mirsad Goran Todorovac <mirsad.todorovac@alu.unizg.hr>
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
This selftest currently runs half in the current namespace and half in
a netns of its own. Therefore, the test can fail if the current
namespace is already configured with incompatible parameters (for
example if it already has a veth0 interface).
Adapt the script to put both ends of the veth pair in their own netns.
Now veth0 is created in NS0 instead of the current namespace, while
veth1 is set up in NS1 (instead of the 'testing' netns).
The user visible netns names are randomised to minimise the risk of
conflicts with already existing namespaces. The cleanup() function
doesn't need to remove the virtual interface anymore: deleting NS0 and
NS1 automatically removes the virtual interfaces they contained.
We can remove $ns, which was only used to run ip commands in the
'testing' netns (let's use the builtin "-netns" option instead).
However, we still need a similar functionality as ping and tcpdump
now need to run in NS0. So we now have $RUN_NS0 for that.
Fixes: b690842d12fd ("selftests/net: test l2 tunnel TOS/TTL inheriting")
Reported-by: Mirsad Goran Todorovac <mirsad.todorovac@alu.unizg.hr>
Tested-by: Mirsad Goran Todorovac <mirsad.todorovac@alu.unizg.hr>
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The ping command can run before DAD completes. In that case, ping may
fail and break the selftest.
We don't need DAD here since we're working on isolated device pairs.
Fixes: b690842d12fd ("selftests/net: test l2 tunnel TOS/TTL inheriting")
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
When RISCV port was imported in 5.2, the O_* macros were taken with
their octal value and written as-is in hex, resulting in the getdents64()
to fail in nolibc-test.
Fixes: 582e84f7b779 ("tool headers nolibc: add RISCV support") #5.2
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
When building on ARM in thumb mode with gcc-11.3 at -O2 or -O3,
nolibc-test segfaults during the select() tests. It turns out that at
this level, gcc recognizes an opportunity for using memset() to zero
the fd_set, but it miscompiles it because it also recognizes a memset
pattern as well, and decides to call memset() from the memset() code:
000122bc <memset>:
122bc: b510 push {r4, lr}
122be: 0004 movs r4, r0
122c0: 2a00 cmp r2, #0
122c2: d003 beq.n 122cc <memset+0x10>
122c4: 23ff movs r3, #255 ; 0xff
122c6: 4019 ands r1, r3
122c8: f7ff fff8 bl 122bc <memset>
122cc: 0020 movs r0, r4
122ce: bd10 pop {r4, pc}
Simply placing an empty asm() statement inside the loop suffices to
avoid this.
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
After the nolibc includes were split to facilitate portability from
standard libcs, programs that include only what they need may miss
some symbols which are needed by libgcc. This is the case for raise()
which is needed by the divide by zero code in some architectures for
example.
Regardless, being able to include only the apparently needed files is
convenient.
Instead of trying to move all exported definitions to a single file,
since this can change over time, this patch takes another approach
consisting in including the nolibc header at the end of all standard
include files. This way their types and functions are already known
at the moment of inclusion, and including any single one of them is
sufficient to bring all the required ones.
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Depending on the compiler used and the optimization options, the sbrk()
test was crashing, both on real hardware (mips-24kc) and in qemu. One
such example is kernel.org toolchain in version 11.3 optimizing at -Os.
Inspecting the sys_brk() call shows the following code:
0040047c <sys_brk>:
40047c: 24020fcd li v0,4045
400480: 27bdffe0 addiu sp,sp,-32
400484: 0000000c syscall
400488: 27bd0020 addiu sp,sp,32
40048c: 10e00001 beqz a3,400494 <sys_brk+0x18>
400490: 00021023 negu v0,v0
400494: 03e00008 jr ra
It is obviously wrong, the "negu" instruction is placed in beqz's
delayed slot, and worse, there's no nop nor instruction after the
return, so the next function's first instruction (addiu sip,sip,-32)
will also be executed as part of the delayed slot that follows the
return.
This is caused by the ".set noreorder" directive in the _start block,
that applies to the whole program. The compiler emits code without the
delayed slots and relies on the compiler to swap instructions when this
option is not set. Removing the option would require to change the
startup code in a way that wouldn't make it look like the resulting
code, which would not be easy to debug. Instead let's just save the
default ordering before changing it, and restore it at the end of the
_start block. Now the code is correct:
0040047c <sys_brk>:
40047c: 24020fcd li v0,4045
400480: 27bdffe0 addiu sp,sp,-32
400484: 0000000c syscall
400488: 10e00002 beqz a3,400494 <sys_brk+0x18>
40048c: 27bd0020 addiu sp,sp,32
400490: 00021023 negu v0,v0
400494: 03e00008 jr ra
400498: 00000000 nop
Fixes: 66b6f755ad45 ("rcutorture: Import a copy of nolibc") #5.0
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
The mode field has the type encoded as an value in a field, not as a bit
mask. Mask the mode with S_IFMT instead of each type to test. Otherwise,
false positives are possible: eg S_ISDIR will return true for block
devices because S_IFDIR = 0040000 and S_IFBLK = 0060000 since mode is
masked with S_IFDIR instead of S_IFMT. These macros now match the
similar definitions in tools/include/uapi/linux/stat.h.
Signed-off-by: Warner Losh <imp@bsdimp.com>
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
The kernel uses unsigned long for the fd_set bitmap,
but nolibc use u32. This works fine on little endian
machines, but fails on big endian. Convert to unsigned
long to fix this.
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
