IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
The file in include/uapi/linux/ have been cleaned in the previous patches,
so we can now remove these entries from the CONFIG_* ignore-list.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Remove two dated config leak ignore entries from scripts/headers_install.sh:
arch/alpha/include/uapi/asm/setup.h does no more leak any CONFIG_* symbol to
user-space any more since commit 3cb8b1537f ("alpha: Move setup.h out of
uapi").
Same holds for include/uapi/asm-generic/fcntl.h since commit 306f7cc1e9
("uapi: always define F_GETLK64/F_SETLK64/F_SETLKW64 in fcntl.h").
Signed-off-by: Nicolas Schier <nicolas@fjasle.eu>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Pull fdpick coredump update from Al Viro:
"Switches fdpic coredumps away from original aout dumping primitives to
the same kind of regset use as regular elf coredumps do"
* 'work.fdpic' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
[elf-fdpic] switch coredump to regsets
[elf-fdpic] use elf_dump_thread_status() for the dumper thread as well
[elf-fdpic] move allocation of elf_thread_status into elf_dump_thread_status()
[elf-fdpic] coredump: don't bother with cyclic list for per-thread objects
kill elf_fpxregs_t
take fdpic-related parts of elf_prstatus out
unexport linux/elfcore.h
It's unusable from userland - it uses elf_gregset_t, which is not
provided by exported headers. glibc has it in sys/procfs.h, but
the same file defines struct elf_prstatus, so linux/elfcore.h can't
be included once sys/procfs.h has been pulled. Same goes for uclibc
and dietlibc simply doesn't have elf_gregset_t defined anywhere.
IOW, no userland source is including that thing.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
include/uapi/linux/raw.h leaks CONFIG_MAX_RAW_DEVS to userspace.
Userspace programs cannot use MAX_RAW_MINORS since CONFIG_MAX_RAW_DEVS
is not available anyway.
Remove the MAX_RAW_MINORS definition from the exported header, and use
CONFIG_MAX_RAW_DEVS in drivers/char/raw.c
While I was here, I converted printk(KERN_WARNING ...) to pr_warn(...)
and stretched the warning message.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Link: https://lore.kernel.org/r/20200617083313.183184-1-masahiroy@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
sh5 never became a product and has probably never really worked.
Remove it by recursively deleting all associated Kconfig options
and all corresponding files.
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Rich Felker <dalias@libc.org>
Misuse of CONFIG_* in UAPI headers should result in an error. These config
options can be set in userspace by the user application which includes
these headers to control the APIs and structures being used in a kernel
which supports multiple targets.
Signed-off-by: Siddharth Gupta <sidgup@codeaurora.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
scripts/headers_check.pl can detect references to CONFIG options in
exported headers, but it has been disabled for more than a decade.
Reverting commit 7e3fa56141 ("kbuild: drop check for CONFIG_ in
headers_check") would emit the following warnings for headers_check
on x86:
usr/include/mtd/ubi-user.h:283: leaks CONFIG_MTD_UBI_BEB_LIMIT to userspace where it is not valid
usr/include/linux/cm4000_cs.h:26: leaks CONFIG_COMPAT to userspace where it is not valid
usr/include/linux/pkt_cls.h:301: leaks CONFIG_NET_CLS_ACT to userspace where it is not valid
usr/include/linux/videodev2.h:2465: leaks CONFIG_VIDEO_ADV_DEBUG to userspace where it is not valid
usr/include/linux/bpf.h:249: leaks CONFIG_EFFICIENT_UNALIGNED_ACCESS to userspace where it is not valid
usr/include/linux/bpf.h:819: leaks CONFIG_CGROUP_NET_CLASSID to userspace where it is not valid
usr/include/linux/bpf.h:1011: leaks CONFIG_IP_ROUTE_CLASSID to userspace where it is not valid
usr/include/linux/bpf.h:1742: leaks CONFIG_BPF_KPROBE_OVERRIDE to userspace where it is not valid
usr/include/linux/bpf.h:1747: leaks CONFIG_FUNCTION_ERROR_INJECTION to userspace where it is not valid
usr/include/linux/bpf.h:1936: leaks CONFIG_XFRM to userspace where it is not valid
usr/include/linux/bpf.h:2184: leaks CONFIG_BPF_LIRC_MODE2 to userspace where it is not valid
usr/include/linux/bpf.h:2210: leaks CONFIG_BPF_LIRC_MODE2 to userspace where it is not valid
usr/include/linux/bpf.h:2227: leaks CONFIG_SOCK_CGROUP_DATA to userspace where it is not valid
usr/include/linux/bpf.h:2311: leaks CONFIG_NET to userspace where it is not valid
usr/include/linux/bpf.h:2348: leaks CONFIG_NET to userspace where it is not valid
usr/include/linux/bpf.h:2422: leaks CONFIG_BPF_LIRC_MODE2 to userspace where it is not valid
usr/include/linux/bpf.h:2528: leaks CONFIG_NET to userspace where it is not valid
usr/include/linux/pktcdvd.h:37: leaks CONFIG_CDROM_PKTCDVD_WCACHE to userspace where it is not valid
usr/include/linux/hw_breakpoint.h:27: leaks CONFIG_HAVE_MIXED_BREAKPOINTS_REGS to userspace where it is not valid
usr/include/linux/raw.h:17: leaks CONFIG_MAX_RAW_DEVS to userspace where it is not valid
usr/include/linux/elfcore.h:62: leaks CONFIG_BINFMT_ELF_FDPIC to userspace where it is not valid
usr/include/linux/eventpoll.h:82: leaks CONFIG_PM_SLEEP to userspace where it is not valid
usr/include/linux/atmdev.h:104: leaks CONFIG_COMPAT to userspace where it is not valid
usr/include/asm-generic/unistd.h:651: leaks CONFIG_MMU to userspace where it is not valid
usr/include/asm-generic/bitsperlong.h:9: leaks CONFIG_64BIT to userspace where it is not valid
usr/include/asm-generic/fcntl.h:119: leaks CONFIG_64BIT to userspace where it is not valid
usr/include/asm/auxvec.h:14: leaks CONFIG_IA32_EMULATION to userspace where it is not valid
usr/include/asm/e820.h:14: leaks CONFIG_NODES_SHIFT to userspace where it is not valid
usr/include/asm/e820.h:39: leaks CONFIG_X86_PMEM_LEGACY to userspace where it is not valid
usr/include/asm/e820.h:49: leaks CONFIG_INTEL_TXT to userspace where it is not valid
usr/include/asm/mman.h:7: leaks CONFIG_X86_INTEL_MEMORY_PROTECTION_KEYS to userspace where it is not valid
Most of these are false positives because scripts/headers_check.pl
parses comment lines.
It is also false negative. arch/x86/include/uapi/asm/auxvec.h contains
CONFIG_IA32_EMULATION and CONFIG_X86_64, but the only former is reported.
It would be possible to fix scripts/headers_check.pl, of course.
However, we already have some duplicated checks between headers_check
and CONFIG_UAPI_HEADER_TEST. At this moment of time, there are still
dozens of headers excluded from the header test (usr/include/Makefile),
but we might be able to remove headers_check eventually.
I re-implemented it in scripts/headers_install.sh by using sed because
the most of code in scripts/headers_install.sh is written in sed.
This patch works like this:
[1] Run scripts/unifdef first because we need to drop the code
surrounded by #ifdef __KERNEL__ ... #endif
[2] Remove all C style comments. The sed code is somewhat complicated
since we need to deal with both single and multi line comments.
Precisely speaking, a comment block is replaced with a space just
in case.
CONFIG_FOO/* this is a comment */CONFIG_BAR
should be converted into:
CONFIG_FOO CONFIG_BAR
instead of:
CONFIG_FOOCONFIG_BAR
[3] Match CONFIG_... pattern. It correctly matches to all CONFIG
options that appear in a single line.
After this commit, this would detect the following warnings, all of
which are real ones.
warning: include/uapi/linux/pktcdvd.h: leak CONFIG_CDROM_PKTCDVD_WCACHE to user-space
warning: include/uapi/linux/hw_breakpoint.h: leak CONFIG_HAVE_MIXED_BREAKPOINTS_REGS to user-space
warning: include/uapi/linux/raw.h: leak CONFIG_MAX_RAW_DEVS to user-space
warning: include/uapi/linux/elfcore.h: leak CONFIG_BINFMT_ELF_FDPIC to user-space
warning: include/uapi/linux/eventpoll.h: leak CONFIG_PM_SLEEP to user-space
warning: include/uapi/linux/atmdev.h: leak CONFIG_COMPAT to user-space
warning: include/uapi/asm-generic/fcntl.h: leak CONFIG_64BIT to user-space
warning: arch/x86/include/uapi/asm/auxvec.h: leak CONFIG_IA32_EMULATION to user-space
warning: arch/x86/include/uapi/asm/auxvec.h: leak CONFIG_X86_64 to user-space
warning: arch/x86/include/uapi/asm/mman.h: leak CONFIG_X86_INTEL_MEMORY_PROTECTION_KEYS to user-space
However, it is not nice to show them right now. I created a list of
existing leakages. They are not warned, but a new leakage will be
blocked by the 0-day bot.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
UAPI headers licensed under GPL are supposed to have exception
"WITH Linux-syscall-note" so that they can be included into non-GPL
user space application code.
Unfortunately, people often miss to add it. Break 'make headers'
when any of exported headers lacks the exception note so that the
0-day bot can easily catch it.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Now that headers_install.sh is invoked per file, remove the for-loop
in the shell script.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
* Use BREs where EREs aren't necessary.
* Pass -E instead of -r to use EREs. This will be standardized in the
next POSIX revision[0]. GNU sed supports this since 4.2 (May 2009),
and busybox since 1.22.0 (Jan 2014).
* Use the [:space:] character class instead of ` \t` in bracket
expressions. In bracket expressions, POSIX says that <backslash> loses
its special meaning, so a conforming implementation cannot expand \t
to <tab>[1].
* In BREs, use interval expressions (\{n,m\}) instead of non-standard
features like \+ and \?.
* Use a loop instead of -s flag.
There are still plenty of other cases of non-standard sed invocations
(use of ERE features in BREs, in-place editing), but this fixes some
core ones.
[0] http://austingroupbugs.net/view.php?id=528
[1] http://pubs.opengroup.org/onlinepubs/9699919799/basedefs/V1_chap09.html#tag_09_03_05
Signed-off-by: Michael Forney <forney@google.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.
By default all files without license information are under the default
license of the kernel, which is GPL version 2.
Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier. The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.
This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.
How this work was done:
Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
- file had no licensing information it it.
- file was a */uapi/* one with no licensing information in it,
- file was a */uapi/* one with existing licensing information,
Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.
The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne. Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.
The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed. Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.
Criteria used to select files for SPDX license identifier tagging was:
- Files considered eligible had to be source code files.
- Make and config files were included as candidates if they contained >5
lines of source
- File already had some variant of a license header in it (even if <5
lines).
All documentation files were explicitly excluded.
The following heuristics were used to determine which SPDX license
identifiers to apply.
- when both scanners couldn't find any license traces, file was
considered to have no license information in it, and the top level
COPYING file license applied.
For non */uapi/* files that summary was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 11139
and resulted in the first patch in this series.
If that file was a */uapi/* path one, it was "GPL-2.0 WITH
Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 WITH Linux-syscall-note 930
and resulted in the second patch in this series.
- if a file had some form of licensing information in it, and was one
of the */uapi/* ones, it was denoted with the Linux-syscall-note if
any GPL family license was found in the file or had no licensing in
it (per prior point). Results summary:
SPDX license identifier # files
---------------------------------------------------|------
GPL-2.0 WITH Linux-syscall-note 270
GPL-2.0+ WITH Linux-syscall-note 169
((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21
((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17
LGPL-2.1+ WITH Linux-syscall-note 15
GPL-1.0+ WITH Linux-syscall-note 14
((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5
LGPL-2.0+ WITH Linux-syscall-note 4
LGPL-2.1 WITH Linux-syscall-note 3
((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3
((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1
and that resulted in the third patch in this series.
- when the two scanners agreed on the detected license(s), that became
the concluded license(s).
- when there was disagreement between the two scanners (one detected a
license but the other didn't, or they both detected different
licenses) a manual inspection of the file occurred.
- In most cases a manual inspection of the information in the file
resulted in a clear resolution of the license that should apply (and
which scanner probably needed to revisit its heuristics).
- When it was not immediately clear, the license identifier was
confirmed with lawyers working with the Linux Foundation.
- If there was any question as to the appropriate license identifier,
the file was flagged for further research and to be revisited later
in time.
In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.
Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights. The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.
Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.
In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.
Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
- a full scancode scan run, collecting the matched texts, detected
license ids and scores
- reviewing anything where there was a license detected (about 500+
files) to ensure that the applied SPDX license was correct
- reviewing anything where there was no detection but the patch license
was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
SPDX license was correct
This produced a worksheet with 20 files needing minor correction. This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.
These .csv files were then reviewed by Greg. Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected. This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.) Finally Greg ran the script using the .csv files to
generate the patches.
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
linux/compiler.h is included indirectly by linux/types.h via
uapi/linux/types.h -> uapi/linux/posix_types.h -> linux/stddef.h
-> uapi/linux/stddef.h and is needed to provide a proper definition of
offsetof.
Unfortunately, compiler.h requires a definition of
smp_read_barrier_depends() for defining lockless_dereference() and soon
for defining READ_ONCE(), which means that all
users of READ_ONCE() will need to include asm/barrier.h to avoid splats
such as:
In file included from include/uapi/linux/stddef.h:1:0,
from include/linux/stddef.h:4,
from arch/h8300/kernel/asm-offsets.c:11:
include/linux/list.h: In function 'list_empty':
>> include/linux/compiler.h:343:2: error: implicit declaration of function 'smp_read_barrier_depends' [-Werror=implicit-function-declaration]
smp_read_barrier_depends(); /* Enforce dependency ordering from x */ \
^
A better alternative is to include asm/barrier.h in linux/compiler.h,
but this requires a type definition for "bool" on some architectures
(e.g. x86), which is defined later by linux/types.h. Type "bool" is also
used directly in linux/compiler.h, so the whole thing is pretty fragile.
This patch splits compiler.h in two: compiler_types.h contains type
annotations, definitions and the compiler-specific parts, whereas
compiler.h #includes compiler-types.h and additionally defines macros
such as {READ,WRITE.ACCESS}_ONCE().
uapi/linux/stddef.h and linux/linkage.h are then moved over to include
linux/compiler_types.h, which fixes the build for h8 and blackfin.
Signed-off-by: Will Deacon <will.deacon@arm.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1508840570-22169-2-git-send-email-will.deacon@arm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Pull kbuild changes from Michal Marek:
- fix for handling dependencies of *-objs targets by Masahiro Yamada
- lots of cleanups in the kbuild machinery, also by Masahiro
- fixes for the kconfig build to use an UTF-8 capable ncurses library
if possible and to build on not-so-standard installs
- some more minor fixes
* 'kbuild' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild:
kbuild: Do not reference *-n variables in the Makefile
kbuild: simplify build, clean, modbuiltin shorthands
kbuild: arm: Do not define "comma" twice
kbuild: remove obj-n and lib-n handling
kbuild: remove unnecessary variable initializaions
kbuild: remove unnecessary "obj- := dummy.o" trick
kbuild: handle C=... and M=... after entering into build directory
kbuild: use $(Q) for sub-make target
kbuild: fake the "Entering directory ..." message more simply
kconfig/lxdialog: get ncurses CFLAGS with pkg-config
kconfig: nconfig: fix multi-byte UTF handling
kconfig: lxdialog: fix spelling
kbuild: Make scripts executable
kbuild: remove redundant clean-files from scripts/kconfig/Makefile
kbuild: refactor script/kconfig/Makefile
kbuild: handle the dependency of multi-objs hostprogs appropriately
kbuild: handle multi-objs dependency appropriately
- headers_install requires at least two arguments
- missed closing quote
Signed-off-by: Javier Barrio <javier.barrio.mart@gmail.com>
Cc: Michal Marek <mmarek@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The Makefiles call the respective interpreter explicitly, but this makes
it easier to use the scripts manually.
Signed-off-by: Michal Marek <mmarek@suse.cz>
If headers_install is executed from a deep/long directory structure, the
shell's maximum argument length can be execeeded, which breaks the operation
with:
| make[2]: execvp: /bin/sh: Argument list too long
| make[2]: ***
Instead of passing each files name with the entire path, I give only the file
name without the source path and give this path as a new argument to
headers_install.pl.
Because there is three possible paths, I have tree input-files list, one per
path.
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Tested-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
Remove perl from make headers_install by replacing a perl script (doing a
simple regex search and replace) with a smaller, faster, simpler,
POSIX-2008 shell script implementation. The new shell script is a single
for loop calling sed and piping its output through unifdef to produce the
target file.
Same as last time except for minor tweak to deal with code review from
here: http://lkml.indiana.edu/hypermail/linux/kernel/1302.3/00078.html
(Note that this drops the "arch" argument, which isn't used. Kbuild
already points to the right input files on the command line.)
Signed-off-by: Rob Landley <rob@landley.net>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Josh Boyer <jwboyer@redhat.com>
Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
Cc: David Howells <dhowell@redhat.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Michal Marek <mmarek@suse.cz>
