linux

iv/linux

Fork 0

Commit Graph

Author	SHA1	Message	Date
Bartosz Golaszewski	7dd1871e50	gpio: tps65219: don't use CONFIG_DEBUG_GPIO CONFIG_DEBUG_GPIO should only be used to enable debug log messages and for core GPIOLIB debugging. Don't use it to control the execution of potentially buggy code. Just put it under an always-false #if. Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Acked-by: Linus Walleij <linus.walleij@linaro.org>	2023-12-27 15:56:48 +01:00
Jerome Neanne	57e30e00bd	gpio: tps65219: add GPIO support for TPS65219 PMIC Add support for TPS65219 PMICs GPIO interface. 3 GPIO pins: - GPIO0 only is IO but input mode reserved for MULTI_DEVICE_ENABLE usage. - GPIO1 and GPIO2 are Output only and referred as GPO1 and GPO2 in spec. GPIO0 is statically configured as input or output prior to Linux boot. it is used for MULTI_DEVICE_ENABLE function. This setting is statically configured by NVM. GPIO0 can't be used as a generic GPIO (specification Table 8-34). It's either a GPO when MULTI_DEVICE_EN=0 or a GPI when MULTI_DEVICE_EN=1. Datasheet describes specific usage for non standard GPIO. Datasheet: https://www.ti.com/lit/ds/symlink/tps65219.pdf Co-developed-by: Jonathan Cormier <jcormier@criticallink.com> Signed-off-by: Jonathan Cormier <jcormier@criticallink.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Jerome Neanne <jneanne@baylibre.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>	2023-06-13 14:49:56 +02:00

Author

SHA1

Message

Date

Bartosz Golaszewski

7dd1871e50

gpio: tps65219: don't use CONFIG_DEBUG_GPIO

CONFIG_DEBUG_GPIO should only be used to enable debug log messages and
for core GPIOLIB debugging. Don't use it to control the execution of
potentially buggy code. Just put it under an always-false #if.

Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>

2023-12-27 15:56:48 +01:00

Jerome Neanne

57e30e00bd

gpio: tps65219: add GPIO support for TPS65219 PMIC

Add support for TPS65219 PMICs GPIO interface.

3 GPIO pins:
- GPIO0 only is IO but input mode reserved for MULTI_DEVICE_ENABLE usage.
- GPIO1 and GPIO2 are Output only and referred as GPO1 and GPO2 in spec.

GPIO0 is statically configured as input or output prior to Linux boot.
it is used for MULTI_DEVICE_ENABLE function.
This setting is statically configured by NVM.
GPIO0 can't be used as a generic GPIO (specification Table 8-34).
It's either a GPO when MULTI_DEVICE_EN=0 or a GPI when MULTI_DEVICE_EN=1.

Datasheet describes specific usage for non standard GPIO.

Datasheet: https://www.ti.com/lit/ds/symlink/tps65219.pdf
Co-developed-by: Jonathan Cormier <jcormier@criticallink.com>
Signed-off-by: Jonathan Cormier <jcormier@criticallink.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Jerome Neanne <jneanne@baylibre.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>

2023-06-13 14:49:56 +02:00

2 Commits