9a737e7f8b
7692 Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
Masami Hiramatsu
|
6014a23638 |
bootconfig: Make the bootconfig.o as a normal object file
Since the APIs defined in the bootconfig.o are not individually used, it is meaningless to build it as library by lib-y. Use obj-y for that. Link: https://lkml.kernel.org/r/164921225875.1090670.15565363126983098971.stgit@devnote2 Cc: Padmanabha Srinivasaiah <treasure4paddy@gmail.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Randy Dunlap <rdunlap@infradead.org> Cc: Nick Desaulniers <ndesaulniers@google.com> Cc: Sami Tolvanen <samitolvanen@google.com> Cc: Nathan Chancellor <nathan@kernel.org> Cc: Linux Kbuild mailing list <linux-kbuild@vger.kernel.org> Reported-by: Masahiro Yamada <masahiroy@kernel.org> Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org> |
||
Russ Weight
|
4a4e975bae |
test_firmware: Error injection for firmware upload
Add error injection capability to the test_firmware module specifically for firmware upload testing. Error injection instructions are transferred as the first part of the firmware payload. The format of an error injection string is similar to the error strings that may be read from the error sysfs node. To inject the error "programming:hw-error", one would use the error injection string "inject:programming:hw-error" as the firmware payload: $ echo 1 > loading $ echo inject:programming:hw-error > data $ echo 0 > loading $ cat status idle $ cat error programming:hw-error The first part of the error string is the progress state of the upload at the time of the error. The progress state would be one of the following: "preparing", "transferring", or "programming". The second part of the error string is one of the following: "hw-error", "timeout", "device-busy", "invalid-file-size", "read-write-error", "flash-wearout", and "user-abort". Note that all of the error strings except "user-abort" will fail without delay. The "user-abort" error will cause the firmware upload to stall at the requested progress state for up to 5 minutes to allow you to echo 1 to the cancel sysfs node. It is this cancellation that causes the 'user-abort" error. If the upload is not cancelled within the 5 minute time period, then the upload will complete without an error. Reviewed-by: Luis Chamberlain <mcgrof@kernel.org> Reviewed-by: Tianfei zhang <tianfei.zhang@intel.com> Tested-by: Matthew Gerlach <matthew.gerlach@linux.intel.com> Signed-off-by: Russ Weight <russell.h.weight@intel.com> Link: https://lore.kernel.org/r/20220421212204.36052-8-russell.h.weight@intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
|
Russ Weight
|
a31ad463b7 |
test_firmware: Add test support for firmware upload
Add support for testing the firmware upload driver. There are four sysfs
nodes added:
upload_register: write-only
Write the name of the firmware device node to be created
upload_unregister: write-only
Write the name of the firmware device node to be destroyed
config_upload_name: read/write
Set the name to be used by upload_read
upload_read: read-only
Read back the data associated with the firmware device node named
in config_upload_name
You can create multiple, concurrent firmware device nodes for firmware
upload testing. Read firmware back and validate it using config_upload_name
and upload_red.
Example:
$ cd /sys/devices/virtual/misc/test_firmware
$ echo -n fw1 > upload_register
$ ls fw1
cancel data device error loading power remaining_size status
subsystem uevent
$ dd if=/dev/urandom of=/tmp/random-firmware.bin bs=512 count=4
4+0 records in
4+0 records out
2048 bytes (2.0 kB, 2.0 KiB) copied, 0.000131959 s, 15.5 MB/s
$ echo 1 > fw1/loading
$ cat /tmp/random-firmware.bin > fw1/data
$ echo 0 > fw1/loading
$ cat fw1/status
idle
$ cat fw1/error
$ echo -n fw1 > config_upload_name
$ cmp /tmp/random-firmware.bin upload_read
$ echo $?
0
$ echo -n fw1 > upload_unregister
Reviewed-by: Luis Chamberlain <mcgrof@kernel.org>
Reviewed-by: Tianfei zhang <tianfei.zhang@intel.com>
Tested-by: Matthew Gerlach <matthew.gerlach@linux.intel.com>
Signed-off-by: Russ Weight <russell.h.weight@intel.com>
Link: https://lore.kernel.org/r/20220421212204.36052-7-russell.h.weight@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
||
Matthew Wilcox (Oracle)
|
63b1898fff |
XArray: Disallow sibling entries of nodes
There is a race between xas_split() and xas_load() which can result in
the wrong page being returned, and thus data corruption. Fortunately,
it's hard to hit (syzbot took three months to find it) and often guarded
with VM_BUG_ON().
The anatomy of this race is:
thread A thread B
order-9 page is stored at index 0x200
lookup of page at index 0x274
page split starts
load of sibling entry at offset 9
stores nodes at offsets 8-15
load of entry at offset 8
The entry at offset 8 turns out to be a node, and so we descend into it,
and load the page at index 0x234 instead of 0x274. This is hard to fix
on the split side; we could replace the entire node that contains the
order-9 page instead of replacing the eight entries. Fixing it on
the lookup side is easier; just disallow sibling entries that point
to nodes. This cannot ever be a useful thing as the descent would not
know the correct offset to use within the new node.
The test suite continues to pass, but I have not added a new test for
this bug.
Reported-by: syzbot+cf4cf13056f85dec2c40@syzkaller.appspotmail.com
Tested-by: syzbot+cf4cf13056f85dec2c40@syzkaller.appspotmail.com
Fixes:
|
||
John Ogness
|
faebd693c5 |
printk: rename cpulock functions
Since the printk cpulock is CPU-reentrant and since it is used
in all contexts, its usage must be carefully considered and
most likely will require programming locklessly. To avoid
mistaking the printk cpulock as a typical lock, rename it to
cpu_sync. The main functions then become:
printk_cpu_sync_get_irqsave(flags);
printk_cpu_sync_put_irqrestore(flags);
Add extra notes of caution in the function description to help
developers understand the requirements for correct usage.
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20220421212250.565456-2-john.ogness@linutronix.de
|
||
Josh Poimboeuf
|
489e355b42 |
objtool: Add HAVE_NOINSTR_VALIDATION
Remove CONFIG_NOINSTR_VALIDATION's dependency on HAVE_OBJTOOL, since other arches might want to implement objtool without it. Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Miroslav Benes <mbenes@suse.cz> Link: https://lkml.kernel.org/r/488e94f69db4df154499bc098573d90e5db1c826.1650300597.git.jpoimboe@redhat.com |
||
|
Josh Poimboeuf
|
0f620cefd7 |
objtool: Rename "VMLINUX_VALIDATION" -> "NOINSTR_VALIDATION"
CONFIG_VMLINUX_VALIDATION is just the validation of the "noinstr" rules. That name is a misnomer, because now objtool actually does vmlinux validation for other reasons. Rename CONFIG_VMLINUX_VALIDATION to CONFIG_NOINSTR_VALIDATION. Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Miroslav Benes <mbenes@suse.cz> Link: https://lkml.kernel.org/r/173f07e2d6d1afc0874aed975a61783207c6a531.1650300597.git.jpoimboe@redhat.com |
||
|
Josh Poimboeuf
|
22102f4559 |
objtool: Make noinstr hacks optional
Objtool has some hacks in place to workaround toolchain limitations which otherwise would break no-instrumentation rules. Make the hacks explicit (and optional for other arches) by turning it into a cmdline option and kernel config option. Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Miroslav Benes <mbenes@suse.cz> Link: https://lkml.kernel.org/r/b326eeb9c33231b9dfbb925f194ed7ee40edcd7c.1650300597.git.jpoimboe@redhat.com |
||
|
Josh Poimboeuf
|
03f16cd020 |
objtool: Add CONFIG_OBJTOOL
Now that stack validation is an optional feature of objtool, add CONFIG_OBJTOOL and replace most usages of CONFIG_STACK_VALIDATION with it. CONFIG_STACK_VALIDATION can now be considered to be frame-pointer specific. CONFIG_UNWINDER_ORC is already inherently valid for live patching, so no need to "validate" it. Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Miroslav Benes <mbenes@suse.cz> Link: https://lkml.kernel.org/r/939bf3d85604b2a126412bf11af6e3bd3b872bcb.1650300597.git.jpoimboe@redhat.com |
||
Peter Zijlstra
|
226d44acf6 |
lib/strn*,objtool: Enforce user_access_begin() rules
Apparently GCC can fail to inline a 'static inline' single caller function: lib/strnlen_user.o: warning: objtool: strnlen_user()+0x33: call to do_strnlen_user() with UACCESS enabled lib/strncpy_from_user.o: warning: objtool: strncpy_from_user()+0x33: call to do_strncpy_from_user() with UACCESS enabled Reported-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Josh Poimboeuf <jpoimboe@redhat.com> Link: https://lore.kernel.org/r/20220408094718.262932488@infradead.org |
||
Paolo Abeni
|
edf45f007a | Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net | ||
Sebastian Andrzej Siewior
|
75d8cce128 |
lib/irq_poll: Prevent softirq pending leak in irq_poll_cpu_dead()
irq_poll_cpu_dead() pulls the blk_cpu_iopoll backlog from the dead CPU and raises the POLL softirq with __raise_softirq_irqoff() on the CPU it is running on. That just sets the bit in the pending softirq mask. This means the handling of the softirq is delayed until the next interrupt or a local_bh_disable/enable() pair. As a consequence the CPU on which this code runs can reach idle with the POLL softirq pending, which triggers a warning in the NOHZ idle code. Add a local_bh_disable/enable() pair around the interrupts disabled section in irq_poll_cpu_dead(). local_bh_enable will handle the pending softirq. [tglx: Massaged changelog and comment] Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lore.kernel.org/r/87k0bxgl27.ffs@tglx |
||
Linus Torvalds
|
33563138ac |
Driver core changes for 5.18-rc2
Here are 2 small driver core changes for 5.18-rc2.
They are the final bits in the removal of the default_attrs field in
struct kobj_type. I had to wait until after 5.18-rc1 for all of the
changes to do this came in through different development trees, and then
one new user snuck in. So this series has 2 changes:
- removal of the default_attrs field in the powerpc/pseries/vas
code. Change has been acked by the PPC maintainers to come
through this tree
- removal of default_attrs from struct kobj_type now that all
in-kernel users are removed. This cleans up the kobject code
a little bit and removes some duplicated functionality that
confused people (now there is only one way to do default
groups.)
All of these have been in linux-next for all of this week with no
reported problems.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCYlLRHg8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+yn+9gCfXN0OvKmw5QD55z8YGp/jIycK0ToAnifJ/OX+
sU2V8ZQfNbV8xw7iXfc2
=L+Uc
-----END PGP SIGNATURE-----
Merge tag 'driver-core-5.18-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core updates from Greg KH:
"Here are two small driver core changes for 5.18-rc2.
They are the final bits in the removal of the default_attrs field in
struct kobj_type. I had to wait until after 5.18-rc1 for all of the
changes to do this came in through different development trees, and
then one new user snuck in. So this series has two changes:
- removal of the default_attrs field in the powerpc/pseries/vas code.
The change has been acked by the PPC maintainers to come through
this tree
- removal of default_attrs from struct kobj_type now that all
in-kernel users are removed.
This cleans up the kobject code a little bit and removes some
duplicated functionality that confused people (now there is only
one way to do default groups)
Both of these have been in linux-next for all of this week with no
reported problems"
* tag 'driver-core-5.18-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
kobject: kobj_type: remove default_attrs
powerpc/pseries/vas: use default_groups in kobj_type
|
||
Guo Xuenan
|
eafc0a0239 |
lz4: fix LZ4_decompress_safe_partial read out of bound
When partialDecoding, it is EOF if we've either filled the output buffer
or can't proceed with reading an offset for following match.
In some extreme corner cases when compressed data is suitably corrupted,
UAF will occur. As reported by KASAN [1], LZ4_decompress_safe_partial
may lead to read out of bound problem during decoding. lz4 upstream has
fixed it [2] and this issue has been disscussed here [3] before.
current decompression routine was ported from lz4 v1.8.3, bumping
lib/lz4 to v1.9.+ is certainly a huge work to be done later, so, we'd
better fix it first.
[1] https://lore.kernel.org/all/000000000000830d1205cf7f0477@google.com/
[2]
|
||
Jakub Kicinski
|
34ba23b44c |
Merge https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Daniel Borkmann says:
====================
pull-request: bpf-next 2022-04-09
We've added 63 non-merge commits during the last 9 day(s) which contain
a total of 68 files changed, 4852 insertions(+), 619 deletions(-).
The main changes are:
1) Add libbpf support for USDT (User Statically-Defined Tracing) probes.
USDTs are an abstraction built on top of uprobes, critical for tracing
and BPF, and widely used in production applications, from Andrii Nakryiko.
2) While Andrii was adding support for x86{-64}-specific logic of parsing
USDT argument specification, Ilya followed-up with USDT support for s390
architecture, from Ilya Leoshkevich.
3) Support name-based attaching for uprobe BPF programs in libbpf. The format
supported is `u[ret]probe/binary_path:[raw_offset|function[+offset]]`, e.g.
attaching to libc malloc can be done in BPF via SEC("uprobe/libc.so.6:malloc")
now, from Alan Maguire.
4) Various load/store optimizations for the arm64 JIT to shrink the image
size by using arm64 str/ldr immediate instructions. Also enable pointer
authentication to verify return address for JITed code, from Xu Kuohai.
5) BPF verifier fixes for write access checks to helper functions, e.g.
rd-only memory from bpf_*_cpu_ptr() must not be passed to helpers that
write into passed buffers, from Kumar Kartikeya Dwivedi.
6) Fix overly excessive stack map allocation for its base map structure and
buckets which slipped-in from cleanups during the rlimit accounting removal
back then, from Yuntao Wang.
7) Extend the unstable CT lookup helpers for XDP and tc/BPF to report netfilter
connection tracking tuple direction, from Lorenzo Bianconi.
8) Improve bpftool dump to show BPF program/link type names, Milan Landaverde.
9) Minor cleanups all over the place from various others.
* https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (63 commits)
bpf: Fix excessive memory allocation in stack_map_alloc()
selftests/bpf: Fix return value checks in perf_event_stackmap test
selftests/bpf: Add CO-RE relos into linked_funcs selftests
libbpf: Use weak hidden modifier for USDT BPF-side API functions
libbpf: Don't error out on CO-RE relos for overriden weak subprogs
samples, bpf: Move routes monitor in xdp_router_ipv4 in a dedicated thread
libbpf: Allow WEAK and GLOBAL bindings during BTF fixup
libbpf: Use strlcpy() in path resolution fallback logic
libbpf: Add s390-specific USDT arg spec parsing logic
libbpf: Make BPF-side of USDT support work on big-endian machines
libbpf: Minor style improvements in USDT code
libbpf: Fix use #ifdef instead of #if to avoid compiler warning
libbpf: Potential NULL dereference in usdt_manager_attach_usdt()
selftests/bpf: Uprobe tests should verify param/return values
libbpf: Improve string parsing for uprobe auto-attach
libbpf: Improve library identification for uprobe binary path resolution
selftests/bpf: Test for writes to map key from BPF helpers
selftests/bpf: Test passing rdonly mem to global func
bpf: Reject writes for PTR_TO_MAP_KEY in check_helper_mem_access
bpf: Check PTR_TO_MEM | MEM_RDONLY in check_helper_mem_access
...
====================
Link: https://lore.kernel.org/r/20220408231741.19116-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
||
Jason A. Donenfeld
|
d2825fa936 |
crypto: sm3,sm4 - move into crypto directory
The lib/crypto libraries live in lib because they are used by various drivers of the kernel. In contrast, the various helper functions in crypto are there because they're used exclusively by the crypto API. The SM3 and SM4 helper functions were erroniously moved into lib/crypto/ instead of crypto/, even though there are no in-kernel users outside of the crypto API of those functions. This commit moves them into crypto/. Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: Tianjia Zhang <tianjia.zhang@linux.alibaba.com> Cc: Eric Biggers <ebiggers@kernel.org> Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> |
||
Oliver Glitta
|
5cf909c553 |
mm/slub: use stackdepot to save stack trace in objects
Many stack traces are similar so there are many similar arrays. Stackdepot saves each unique stack only once. Replace field addrs in struct track with depot_stack_handle_t handle. Use stackdepot to save stack trace. The benefits are smaller memory overhead and possibility to aggregate per-cache statistics in the following patch using the stackdepot handle instead of matching stacks manually. [ vbabka@suse.cz: rebase to 5.17-rc1 and adjust accordingly ] This was initially merged as commit |
||
Vlastimil Babka
|
a5f1783be2 |
lib/stackdepot: allow requesting early initialization dynamically
In a later patch we want to add stackdepot support for object owner tracking in slub caches, which is enabled by slub_debug boot parameter. This creates a bootstrap problem as some caches are created early in boot when slab_is_available() is false and thus stack_depot_init() tries to use memblock. But, as reported by Hyeonggon Yoo [1] we are already beyond memblock_free_all(). Ideally memblock allocation should fail, yet it succeeds, but later the system crashes, which is a separately handled issue. To resolve this boostrap issue in a robust way, this patch adds another way to request stack_depot_early_init(), which happens at a well-defined point of time. In addition to build-time CONFIG_STACKDEPOT_ALWAYS_INIT, code that's e.g. processing boot parameters (which happens early enough) can call a new function stack_depot_want_early_init(), which sets a flag that stack_depot_early_init() will check. In this patch we also convert page_owner to this approach. While it doesn't have the bootstrap issue as slub, it's also a functionality enabled by a boot param and can thus request stack_depot_early_init() with memblock allocation instead of later initialization with kvmalloc(). As suggested by Mike, make stack_depot_early_init() only attempt memblock allocation and stack_depot_init() only attempt kvmalloc(). Also change the latter to kvcalloc(). In both cases we can lose the explicit array zeroing, which the allocations do already. As suggested by Marco, provide empty implementations of the init functions for !CONFIG_STACKDEPOT builds to simplify the callers. [1] https://lore.kernel.org/all/YhnUcqyeMgCrWZbd@ip-172-31-19-208.ap-northeast-1.compute.internal/ Reported-by: Hyeonggon Yoo <42.hyeyoo@gmail.com> Suggested-by: Mike Rapoport <rppt@linux.ibm.com> Suggested-by: Marco Elver <elver@google.com> Signed-off-by: Vlastimil Babka <vbabka@suse.cz> Reviewed-by: Marco Elver <elver@google.com> Reviewed-and-tested-by: Hyeonggon Yoo <42.hyeyoo@gmail.com> Reviewed-by: Mike Rapoport <rppt@linux.ibm.com> Acked-by: David Rientjes <rientjes@google.com> |
||
Hyeonggon Yoo
|
a285909f47 |
mm/slub, kunit: Make slub_kunit unaffected by user specified flags
slub_kunit does not expect other debugging flags to be set when running tests. When SLAB_RED_ZONE flag is set globally, test fails because the flag affects number of errors reported. To make slub_kunit unaffected by user specified debugging flags, introduce SLAB_NO_USER_FLAGS to ignore them. With this flag, only flags specified in the code are used and others are ignored. Suggested-by: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Hyeonggon Yoo <42.hyeyoo@gmail.com> Signed-off-by: Vlastimil Babka <vbabka@suse.cz> Link: https://lore.kernel.org/r/Yk0sY9yoJhFEXWOg@hyeyoo |
||
David Gow
|
59729170af |
kunit: Make kunit_remove_resource() idempotent
The kunit_remove_resource() function is used to unlink a resource from the list of resources in the test, making it no longer show up in kunit_find_resource(). However, this could lead to a race condition if two threads called kunit_remove_resource() on the same resource at the same time: the resource would be removed from the list twice (causing a crash at the second list_del()), and the refcount for the resource would be decremented twice (instead of once, for the reference held by the resource list). Fix both problems, the first by using list_del_init(), and the second by checking if the resource has already been removed using list_empty(), and only decrementing its refcount if it has not. Also add a KUnit test for the kunit_remove_resource() function which tests this behaviour. Reported-by: Daniel Latypov <dlatypov@google.com> Signed-off-by: David Gow <davidgow@google.com> Reviewed-by: Brendan Higgins <brendanhiggins@google.com> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org> |
||
|
David Gow
|
1ff522b6ef |
list: test: Test the hlist structure
Add KUnit tests to the hlist linked-list structure which is used by hashtables. This should give coverage of every function and macro in list.h, as well as (combined with the KUnit tests for the hash functions) get very close to having tests for the hashtable structure. The tests here mirror the existing list tests, and are found in a new suite titled 'hlist'. Signed-off-by: David Gow <davidgow@google.com> Reviewed-by: Brendan Higgins <brendanhiggins@google.com> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org> |
||
Greg Kroah-Hartman
|
cdb4f26a63 |
kobject: kobj_type: remove default_attrs
Now that all in-kernel users of default_attrs for the kobj_type are gone and converted to properly use the default_groups pointer instead, it can be safely removed. There is one standard way to create sysfs files in a kobj_type, and not two like before, causing confusion as to which should be used. Cc: "Rafael J. Wysocki" <rafael@kernel.org> Link: https://lore.kernel.org/r/20220106133151.607703-1-gregkh@linuxfoundation.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
Daniel Latypov
|
cdebea6968 |
kunit: split resource API impl from test.c into new resource.c
We've split out the declarations from include/kunit/test.h into resource.h. This patch splits out the definitions as well for consistency. A side effect of this is git blame won't properly track history by default, users need to run $ git blame -L ,1 -C13 lib/kunit/resource.c Signed-off-by: Daniel Latypov <dlatypov@google.com> Reviewed-by: David Gow <davidgow@google.com> Reviewed-by: Brendan Higgins <brendanhiggins@google.com> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org> |
||
Ricardo Ribalda
|
ccad78f17f |
kasan: test: Use NULL macros
Replace PTR_EQ checks with the more idiomatic and specific NULL macros. Acked-by: Daniel Latypov <dlatypov@google.com> Signed-off-by: Ricardo Ribalda <ribalda@chromium.org> Acked-by: Brendan Higgins <brendanhiggins@google.com> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org> |
||
|
Ricardo Ribalda
|
de82c15dc0 |
kunit: use NULL macros
Replace the NULL checks with the more specific and idiomatic NULL macros. Reviewed-by: Brendan Higgins <brendanhiggins@google.com> Reviewed-by: Daniel Latypov <dlatypov@google.com> Signed-off-by: Ricardo Ribalda <ribalda@chromium.org> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org> |
||
|
Linus Torvalds
|
d589ae0d44 |
for-5.18/block-2022-04-01
-----BEGIN PGP SIGNATURE-----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=QzvG
-----END PGP SIGNATURE-----
Merge tag 'for-5.18/block-2022-04-01' of git://git.kernel.dk/linux-block
Pull block fixes from Jens Axboe:
"Either fixes or a few additions that got missed in the initial merge
window pull. In detail:
- List iterator fix to avoid leaking value post loop (Jakob)
- One-off fix in minor count (Christophe)
- Fix for a regression in how io priority setting works for an
exiting task (Jiri)
- Fix a regression in this merge window with blkg_free() being called
in an inappropriate context (Ming)
- Misc fixes (Ming, Tom)"
* tag 'for-5.18/block-2022-04-01' of git://git.kernel.dk/linux-block:
blk-wbt: remove wbt_track stub
block: use dedicated list iterator variable
block: Fix the maximum minor value is blk_alloc_ext_minor()
block: restore the old set_task_ioprio() behaviour wrt PF_EXITING
block: avoid calling blkg_free() in atomic context
lib/sbitmap: allocate sb->map via kvzalloc_node
|
||
|
Linus Torvalds
|
5a3fe95d76 |
XArray update for 5.18:
- Documentation update - Fix test-suite build after move of bitmap.h - Fix xas_create_range() when a large entry is already present - Fix xas_split() of a shadow entry -----BEGIN PGP SIGNATURE----- iQEzBAABCgAdFiEEejHryeLBw/spnjHrDpNsjXcpgj4FAmJHBfoACgkQDpNsjXcp gj4eGggAlBsHZCBDT1wY45hQjaZA+GlI1Q7M8/x+MkaK3CN6O3FMdNcbUx/KVkMJ YItwoh9X5VywsMD4ASxPqT/3t2lJFV7ldNvwQpLr1eVSP34XsVxprYDgT09a/CXS JEwLoyy18FMCZJTWPdszGvazrtAaQmvEMwcz3Y9km93qVx5o+dvninGsKWfOuu+O b/+VIv0wHG0RfsXVrC10BfzMlqe50YMrLOWVrb66+XDdjtITeZ2M7PXRtsa5iOtG TDFzngSrOl59gqqhvDrhZOHY2S+wJnuCaXiG6w6rBLDRucZ5p2x4WWYeqtZGQlDk nLi6wMAp3fTt6+JlbXPtT01RHWZEyw== =xrXd -----END PGP SIGNATURE----- Merge tag 'xarray-5.18' of git://git.infradead.org/users/willy/xarray Pull XArray updates from Matthew Wilcox: - Documentation update - Fix test-suite build after move of bitmap.h - Fix xas_create_range() when a large entry is already present - Fix xas_split() of a shadow entry * tag 'xarray-5.18' of git://git.infradead.org/users/willy/xarray: XArray: Update the LRU list in xas_split() XArray: Fix xas_create_range() when multi-order entry present XArray: Include bitmap.h from xarray.h XArray: Document the locking requirement for the xa_state |
||
|
Linus Torvalds
|
e8b767f5e0 |
This pull request contains the following changes for UML:
- Devicetree support (for testing) - Various cleanups and fixes: UBD, port_user, uml_mconsole - Maintainer update -----BEGIN PGP SIGNATURE----- iQJKBAABCAA0FiEEdgfidid8lnn52cLTZvlZhesYu8EFAmJFwUMWHHJpY2hhcmRA c2lnbWEtc3Rhci5hdAAKCRBm+VmF6xi7wQqBD/9gLyeiVp2eu1YFVir64IASgVjK lNdlAfUwfebtEsw65JcfY8K64910ahw6TvkjTT2A+QGeJIYaVwmw69bLXJUvQq31 C7ZDsMHptuNiZrHDL9SoA0DfwqRdJx3tgGzDnSkhX+2T7Zs5n1nLRMBmn/NJV9Qy CmxG9fLH1VsU0p6RI76WST3GPLOqWa3jCeHK1vMGZNXI+eo5prHc59lkOcT7lEy7 M4vJRaAV6pCDDYMQdDOYr1PDEeG7/h49EqdKylkOhonDyYB649rL6Lc9nRBvSts3 NXX/qYy1Sj1AlOSR5IOon6QCyk1hap9kr85QoCtz3VMabD/yLlBovZzLOLaF+0S6 dQWgKg806g8QYQGxN03Ph0Pb5cA6hAjr8nVmAuICJDWgmY6Oo74pEvhI8toofFzk NJzwa6G99xNhfggeTcGdG0ddQDT8N3enKspDPkzpN127GzU5cgvI1Z8wnZXB7JDM zLMCxzwehocCSrFlh9aQDFK1XJfEWuP66xEPl5cX46//IMKqsrXEOjNlCTRUmA5F OhU4qqb01OW3K4HPaAkBcGPZ0HhFn6JREUFyNW07dg6s73IWzf0CaNKeYJS7abln tdvfPg3OPNXCjHd3aCW22EzuB9R/K8BNMkva3QQZxtUa+tOjBdBd9JBJ+vHGA1MN 7/k60wl1dt8/N9yHFg== =YsK8 -----END PGP SIGNATURE----- Merge tag 'for-linus-5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/uml Pull UML updates from Richard Weinberger: - Devicetree support (for testing) - Various cleanups and fixes: UBD, port_user, uml_mconsole - Maintainer update * tag 'for-linus-5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/uml: um: run_helper: Write error message to kernel log on exec failure on host um: port_user: Improve error handling when port-helper is not found um: port_user: Allow setting path to port-helper using UML_PORT_HELPER envvar um: port_user: Search for in.telnetd in PATH um: clang: Strip out -mno-global-merge from USER_CFLAGS docs: UML: Mention telnetd for port channel um: Remove unused timeval_to_ns() function um: Fix uml_mconsole stop/go um: Cleanup syscall_handler_t definition/cast, fix warning uml: net: vector: fix const issue um: Fix WRITE_ZEROES in the UBD Driver um: Migrate vector drivers to NAPI um: Fix order of dtb unflatten/early init um: fix and optimize xor select template for CONFIG64 and timetravel mode um: Document dtb command line option lib/logic_iomem: correct fallback config references um: Remove duplicated include in syscalls_64.c MAINTAINERS: Update UserModeLinux entry |
||
Xu Kuohai
|
38608ee7b6 |
bpf, tests: Add load store test case for tail call
Add test case to enusre that the caller and callee's fp offsets are correct during tail call (mainly asserting for arm64 JIT). Tested on both big-endian and little-endian arm64 qemu, result: test_bpf: Summary: 1026 PASSED, 0 FAILED, [1014/1014 JIT'ed] test_bpf: test_tail_calls: Summary: 10 PASSED, 0 FAILED, [10/10 JIT'ed] test_bpf: test_skb_segment: Summary: 2 PASSED, 0 FAILED Signed-off-by: Xu Kuohai <xukuohai@huawei.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20220321152852.2334294-6-xukuohai@huawei.com |
||
|
Xu Kuohai
|
f516420f68 |
bpf, tests: Add tests for BPF_LDX/BPF_STX with different offsets
This patch adds tests to verify the behavior of BPF_LDX/BPF_STX + BPF_B/BPF_H/BPF_W/BPF_DW with negative offset, small positive offset, large positive offset, and misaligned offset. Tested on both big-endian and little-endian arm64 qemu, result: test_bpf: Summary: 1026 PASSED, 0 FAILED, [1014/1014 JIT'ed]'] test_bpf: test_tail_calls: Summary: 8 PASSED, 0 FAILED, [8/8 JIT'ed] test_bpf: test_skb_segment: Summary: 2 PASSED, 0 FAILED Signed-off-by: Xu Kuohai <xukuohai@huawei.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20220321152852.2334294-5-xukuohai@huawei.com |
||
|
Matthew Wilcox (Oracle)
|
3ed4bb7715 |
XArray: Update the LRU list in xas_split()
When splitting a value entry, we may need to add the new nodes to the LRU list and remove the parent node from the LRU list. The WARN_ON checks in shadow_lru_isolate() catch this oversight. This bug was latent until we stopped splitting folios in shrink_page_list() with commit |
||
Dan Carpenter
|
dc0ce6cc4b |
lib/test: use after free in register_test_dev_kmod()
The "test_dev" pointer is freed but then returned to the caller.
Fixes:
|
||
|
Matthew Wilcox (Oracle)
|
3e3c658055 |
XArray: Fix xas_create_range() when multi-order entry present
If there is already an entry present that is of order >= XA_CHUNK_SHIFT
when we call xas_create_range(), xas_create_range() will misinterpret
that entry as a node and dereference xa_node->parent, generally leading
to a crash that looks something like this:
general protection fault, probably for non-canonical address 0xdffffc0000000001:
0000 [#1] PREEMPT SMP KASAN
KASAN: null-ptr-deref in range [0x0000000000000008-0x000000000000000f]
CPU: 0 PID: 32 Comm: khugepaged Not tainted 5.17.0-rc8-syzkaller-00003-g56e337f2cf13 #0
RIP: 0010:xa_parent_locked include/linux/xarray.h:1207 [inline]
RIP: 0010:xas_create_range+0x2d9/0x6e0 lib/xarray.c:725
It's deterministically reproducable once you know what the problem is,
but producing it in a live kernel requires khugepaged to hit a race.
While the problem has been present since xas_create_range() was
introduced, I'm not aware of a way to hit it before the page cache was
converted to use multi-index entries.
Fixes:
|
||
|
Linus Torvalds
|
4be240b18a |
memcpy updates for v5.18-rc1
- Enable strict FORTIFY_SOURCE compile-time validation of memcpy buffers
- Add Clang features needed for FORTIFY_SOURCE support
- Enable FORTIFY_SOURCE for Clang where possible
-----BEGIN PGP SIGNATURE-----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=8qRJ
-----END PGP SIGNATURE-----
Merge tag 'memcpy-v5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull FORTIFY_SOURCE updates from Kees Cook:
"This series consists of two halves:
- strict compile-time buffer size checking under FORTIFY_SOURCE for
the memcpy()-family of functions (for extensive details and
rationale, see the first commit)
- enabling FORTIFY_SOURCE for Clang, which has had many overlapping
bugs that we've finally worked past"
* tag 'memcpy-v5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
fortify: Add Clang support
fortify: Make sure strlen() may still be used as a constant expression
fortify: Use __diagnose_as() for better diagnostic coverage
fortify: Make pointer arguments const
Compiler Attributes: Add __diagnose_as for Clang
Compiler Attributes: Add __overloadable for Clang
Compiler Attributes: Add __pass_object_size for Clang
fortify: Replace open-coded __gnu_inline attribute
fortify: Update compile-time tests for Clang 14
fortify: Detect struct member overflows in memset() at compile-time
fortify: Detect struct member overflows in memmove() at compile-time
fortify: Detect struct member overflows in memcpy() at compile-time
|
||
|
Linus Torvalds
|
3f7282139f |
for-5.18/64bit-pi-2022-03-25
-----BEGIN PGP SIGNATURE----- iQJEBAABCAAuFiEEwPw5LcreJtl1+l5K99NY+ylx4KYFAmI92rYQHGF4Ym9lQGtl cm5lbC5kawAKCRD301j7KXHgpkAJD/9PvRN61YnNRjjAiHgslwMc2fy9lkxwYF4j +DYqFwnhHgiADO/3Y3wsqHxmDJrhq7vxHM3btxUzkKxg2mVoOI/Bm6rhqEPhNkok nlpMWHXR+9Jvl85IO5jHg9GHZ/PZfaDMn9naVXVpHVgycdJ06tr7T1tMtoAtsEzA atEkwpc+r8E2NlxkcTPAQhJzmkrHVdxgtWxlKL/RkmivmBXu3/fj2pLHYyPcvqm1 8LxDn1DIoUHlpce10Qf7r+hf1sXiKNv+nltl9aWxdoSOM8OYHjQcp4K1qe+VYVzC XbXqg3ZWaGKSnieyawN2yXtFkZSzgyCy+TCTHnf8NwGfgYYk86twh2clP5t6lE58 /TC8CmrBHIy8+79BvpSlTh7LlGip0snY3IVbZhR5EHJV3nDVtg/vdDwiSSQ6VdCM FM3tkY7KvZDb42IvKzD/NKmAzKv/XMri1MmQB2f/VvbwN3OK5EQOJT1DYFdiohUQ 1YIb81HiGvlogB783HFXXAcHu/qQNZGDK4EDjNFHThPtmYqtLuOixIo0KG6BJnuV sl/YhtDSe3FRnvcDZ4xki9CpBqHFG7vK85H05NXXdC1ddBdQ+N+yLS1/jONUlkGc vJphI6FPr+DcPX8o/QuapQpNfg+HXY/h4u83jFJ8VRAyraxSarZ/19at0DM2wdvR IhKlNfOHlA== =RAVX -----END PGP SIGNATURE----- Merge tag 'for-5.18/64bit-pi-2022-03-25' of git://git.kernel.dk/linux-block Pull block layer 64-bit data integrity support from Jens Axboe: "This adds support for 64-bit data integrity in the block layer and in NVMe" * tag 'for-5.18/64bit-pi-2022-03-25' of git://git.kernel.dk/linux-block: crypto: fix crc64 testmgr digest byte order nvme: add support for enhanced metadata block: add pi for extended integrity crypto: add rocksoft 64b crc guard tag framework lib: add rocksoft model crc64 linux/kernel: introduce lower_48_bits function asm-generic: introduce be48 unaligned accessors nvme: allow integrity on extended metadata formats block: support pi with extended metadata |
||
|
Linus Torvalds
|
29c8c18363 |
Merge branch 'akpm' (patches from Andrew)
Merge yet more updates from Andrew Morton: "This is the material which was staged after willystuff in linux-next. Subsystems affected by this patch series: mm (debug, selftests, pagecache, thp, rmap, migration, kasan, hugetlb, pagemap, madvise), and selftests" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (113 commits) selftests: kselftest framework: provide "finished" helper mm: madvise: MADV_DONTNEED_LOCKED mm: fix race between MADV_FREE reclaim and blkdev direct IO read mm: generalize ARCH_HAS_FILTER_PGPROT mm: unmap_mapping_range_tree() with i_mmap_rwsem shared mm: warn on deleting redirtied only if accounted mm/huge_memory: remove stale locking logic from __split_huge_pmd() mm/huge_memory: remove stale page_trans_huge_mapcount() mm/swapfile: remove stale reuse_swap_page() mm/khugepaged: remove reuse_swap_page() usage mm/huge_memory: streamline COW logic in do_huge_pmd_wp_page() mm: streamline COW logic in do_swap_page() mm: slightly clarify KSM logic in do_swap_page() mm: optimize do_wp_page() for fresh pages in local LRU pagevecs mm: optimize do_wp_page() for exclusive pages in the swapcache mm/huge_memory: make is_transparent_hugepage() static userfaultfd/selftests: enable hugetlb remap and remove event testing selftests/vm: add hugetlb madvise MADV_DONTNEED MADV_REMOVE test mm: enable MADV_DONTNEED for hugetlb mappings kasan: disable LOCKDEP when printing reports ... |
||
Peter Collingbourne
|
2dfd1bd992 |
kasan: update function name in comments
The function kasan_global_oob was renamed to kasan_global_oob_right, but the comments referring to it were not updated. Do so. Link: https://linux-review.googlesource.com/id/I20faa90126937bbee77d9d44709556c3dd4b40be Link: https://lkml.kernel.org/r/20220219012433.890941-1-pcc@google.com Signed-off-by: Peter Collingbourne <pcc@google.com> Reviewed-by: Miaohe Lin <linmiaohe@huawei.com> Reviewed-by: Marco Elver <elver@google.com> Reviewed-by: Andrey Konovalov <andreyknvl@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
Andrey Konovalov
|
ed6d74446c |
kasan: test: support async (again) and asymm modes for HW_TAGS
Async mode support has already been implemented in commit |
||
|
Andrey Konovalov
|
1a2473f0cb |
kasan: improve vmalloc tests
Update the existing vmalloc_oob() test to account for the specifics of the tag-based modes. Also add a few new checks and comments. Add new vmalloc-related tests: - vmalloc_helpers_tags() to check that exported vmalloc helpers can handle tagged pointers. - vmap_tags() to check that SW_TAGS mode properly tags vmap() mappings. - vm_map_ram_tags() to check that SW_TAGS mode properly tags vm_map_ram() mappings. - vmalloc_percpu() to check that SW_TAGS mode tags regions allocated for __alloc_percpu(). The tagging of per-cpu mappings is best-effort; proper tagging is tracked in [1]. [1] https://bugzilla.kernel.org/show_bug.cgi?id=215019 [sfr@canb.auug.org.au: similar to "kasan: test: fix compatibility with FORTIFY_SOURCE"] Link: https://lkml.kernel.org/r/20220128144801.73f5ced0@canb.auug.org.au Link: https://lkml.kernel.org/r/865c91ba49b90623ab50c7526b79ccb955f544f0.1644950160.git.andreyknvl@google.com [andreyknvl@google.com: set_memory_rw/ro() are not exported to modules] Link: https://lkml.kernel.org/r/019ac41602e0c4a7dfe96dc8158a95097c2b2ebd.1645554036.git.andreyknvl@google.com [akpm@linux-foundation.org: fix build] Cc: Andrey Konovalov <andreyknvl@gmail.com> [andreyknvl@google.com: vmap_tags() and vm_map_ram_tags() pass invalid page array size] Link: https://lkml.kernel.org/r/bbdc1c0501c5275e7f26fdb8e2a7b14a40a9f36b.1643047180.git.andreyknvl@google.com Signed-off-by: Andrey Konovalov <andreyknvl@google.com> Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Acked-by: Marco Elver <elver@google.com> Cc: Alexander Potapenko <glider@google.com> Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Evgenii Stepanov <eugenis@google.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Peter Collingbourne <pcc@google.com> Cc: Vincenzo Frascino <vincenzo.frascino@arm.com> Cc: Will Deacon <will@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Andrey Konovalov
|
fbefb423f8 |
kasan: allow enabling KASAN_VMALLOC and SW/HW_TAGS
Allow enabling CONFIG_KASAN_VMALLOC with SW_TAGS and HW_TAGS KASAN modes. Also adjust CONFIG_KASAN_VMALLOC description: - Mention HW_TAGS support. - Remove unneeded internal details: they have no place in Kconfig description and are already explained in the documentation. Link: https://lkml.kernel.org/r/bfa0fdedfe25f65e5caa4e410f074ddbac7a0b59.1643047180.git.andreyknvl@google.com Signed-off-by: Andrey Konovalov <andreyknvl@google.com> Acked-by: Marco Elver <elver@google.com> Cc: Alexander Potapenko <glider@google.com> Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Evgenii Stepanov <eugenis@google.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Peter Collingbourne <pcc@google.com> Cc: Vincenzo Frascino <vincenzo.frascino@arm.com> Cc: Will Deacon <will@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
Waiman Long
|
ef62c8ff1d |
lib/vsprintf: avoid redundant work with 0 size
Patch series "mm/page_owner: Extend page_owner to show memcg information", v4.
While debugging the constant increase in percpu memory consumption on a
system that spawned large number of containers, it was found that a lot
of offline mem_cgroup structures remained in place without being freed.
Further investigation indicated that those mem_cgroup structures were
pinned by some pages.
In order to find out what those pages are, the existing page_owner
debugging tool is extended to show memory cgroup information and whether
those memcgs are offline or not. With the enhanced page_owner tool, the
following is a typical page that pinned the mem_cgroup structure in my
test case:
Page allocated via order 0, mask 0x1100cca(GFP_HIGHUSER_MOVABLE), pid 162970 (podman), ts 1097761405537 ns, free_ts 1097760838089 ns
PFN 1925700 type Movable Block 3761 type Movable Flags 0x17ffffc00c001c(uptodate|dirty|lru|reclaim|swapbacked|node=0|zone=2|lastcpupid=0x1fffff)
prep_new_page+0xac/0xe0
get_page_from_freelist+0x1327/0x14d0
__alloc_pages+0x191/0x340
alloc_pages_vma+0x84/0x250
shmem_alloc_page+0x3f/0x90
shmem_alloc_and_acct_page+0x76/0x1c0
shmem_getpage_gfp+0x281/0x940
shmem_write_begin+0x36/0xe0
generic_perform_write+0xed/0x1d0
__generic_file_write_iter+0xdc/0x1b0
generic_file_write_iter+0x5d/0xb0
new_sync_write+0x11f/0x1b0
vfs_write+0x1ba/0x2a0
ksys_write+0x59/0xd0
do_syscall_64+0x37/0x80
entry_SYSCALL_64_after_hwframe+0x44/0xae
Charged to offline memcg libpod-conmon-15e4f9c758422306b73b2dd99f9d50a5ea53cbb16b4a13a2c2308a4253cc0ec8.
So the page was not freed because it was part of a shmem segment. That
is useful information that can help users to diagnose similar problems.
With cgroup v1, /proc/cgroups can be read to find out the total number
of memory cgroups (online + offline). With cgroup v2, the cgroup.stat
of the root cgroup can be read to find the number of dying cgroups (most
likely pinned by dying memcgs).
The page_owner feature is not supposed to be enabled for production
system due to its memory overhead. However, if it is suspected that
dying memcgs are increasing over time, a test environment with
page_owner enabled can then be set up with appropriate workload for
further analysis on what may be causing the increasing number of dying
memcgs.
This patch (of 4):
For *scnprintf(), vsnprintf() is always called even if the input size is
0. That is a waste of time, so just return 0 in this case.
Note that vsnprintf() will never return -1 to indicate an error. So
skipping the call to vsnprintf() when size is 0 will have no functional
impact at all.
Link: https://lkml.kernel.org/r/20220202203036.744010-1-longman@redhat.com
Link: https://lkml.kernel.org/r/20220202203036.744010-2-longman@redhat.com
Signed-off-by: Waiman Long <longman@redhat.com>
Acked-by: David Rientjes <rientjes@google.com>
Reviewed-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Acked-by: Roman Gushchin <guro@fb.com>
Acked-by: Rafael Aquini <aquini@redhat.com>
Acked-by: Mike Rapoport <rppt@linux.ibm.com>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Steven Rostedt (Google) <rostedt@goodmis.org>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Cc: Ira Weiny <ira.weiny@intel.com>
Cc: David Rientjes <rientjes@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
||
|
Linus Torvalds
|
b9132c32e0 |
cxl for 5.18
- Add a driver for 'struct cxl_memdev' objects responsible for CXL.mem
operation as distinct from 'cxl_pci' mailbox operations. Its primary
responsibility is enumerating an endpoint 'struct cxl_port' and all the
'struct cxl_port' instances between an endpoint and the CXL platform
root.
- Add a driver for 'struct cxl_port' objects responsible for enumerating
and operating all Host-managed Device Memory (HDM) decoder resources
between the platform-level CXL memory description, all intervening host
bridges / switches, and the HDM resources in endpoints.
- Update the cxl_pci driver to validate CXL.mem operation precursors to
HDM decoder operation like ready-polling, and legacy CXL 1.1 DVSEC
based CXL.mem configuration.
- Add basic lockdep coverage for usage of device_lock() on CXL subsystem
objects similar to what exists for LIBNVDIMM. Include a compile-time
switch for which subsystem to validate at run-time.
- Update cxl_test to emulate a one level switch topology.
- Document a "Theory of Operation" for the subsystem.
- Add 'numa_node' and 'serial' attributes to cxl_memdev sysfs
- Include miscellaneous fixes for spec / QEMU CXL emulation
compatibility and static analysis reports.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQSbo+XnGs+rwLz9XGXfioYZHlFsZwUCYjpX6AAKCRDfioYZHlFs
ZzyxAQCztxAXj7mzkm1Qt5zZz4e7p/6sR49B03jBTfPtrEF9kQEAl9R15WVt6U+o
Ooof1XhRic3kT6e8zS3ZVKHzGduYxwM=
=mR94
-----END PGP SIGNATURE-----
Merge tag 'cxl-for-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl
Pull CXL (Compute Express Link) updates from Dan Williams:
"This development cycle extends the subsystem to discover CXL resources
throughout a CXL/PCIe switch topology and respond to hot add/remove
events anywhere in that topology.
This is more foundational infrastructure in preparation for dynamic
memory region provisioning support. Recall that CXL memory regions, as
the new "Theory of Operation" section of
Documentation/driver-api/cxl/memory-devices.rst describes, bring
storage volume striping semantics to memory.
The hot add/remove behavior is validated with extensions to the
cxl_test unit test environment and this test in the cxl-cli test
suite:
https://github.com/pmem/ndctl/blob/djbw/for-74/cxl/test/cxl-topology.sh
Summary:
- Add a driver for 'struct cxl_memdev' objects responsible for
CXL.mem operation as distinct from 'cxl_pci' mailbox operations.
Its primary responsibility is enumerating an endpoint 'struct
cxl_port' and all the 'struct cxl_port' instances between an
endpoint and the CXL platform root.
- Add a driver for 'struct cxl_port' objects responsible for
enumerating and operating all Host-managed Device Memory (HDM)
decoder resources between the platform-level CXL memory
description, all intervening host bridges / switches, and the HDM
resources in endpoints.
- Update the cxl_pci driver to validate CXL.mem operation precursors
to HDM decoder operation like ready-polling, and legacy CXL 1.1
DVSEC based CXL.mem configuration.
- Add basic lockdep coverage for usage of device_lock() on CXL
subsystem objects similar to what exists for LIBNVDIMM. Include a
compile-time switch for which subsystem to validate at run-time.
- Update cxl_test to emulate a one level switch topology.
- Document a "Theory of Operation" for the subsystem.
- Add 'numa_node' and 'serial' attributes to cxl_memdev sysfs
- Include miscellaneous fixes for spec / QEMU CXL emulation
compatibility and static analysis reports"
* tag 'cxl-for-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl: (48 commits)
cxl/core/port: Fix NULL but dereferenced coccicheck error
cxl/port: Hold port reference until decoder release
cxl/port: Fix endpoint refcount leak
cxl/core: Fix cxl_device_lock() class detection
cxl/core/port: Fix unregister_port() lock assertion
cxl/regs: Fix size of CXL Capability Header Register
cxl/core/port: Handle invalid decoders
cxl/core/port: Fix / relax decoder target enumeration
tools/testing/cxl: Add a physical_node link
tools/testing/cxl: Enumerate mock decoders
tools/testing/cxl: Mock one level of switches
tools/testing/cxl: Fix root port to host bridge assignment
tools/testing/cxl: Mock dvsec_ranges()
cxl/core/port: Add endpoint decoders
cxl/core: Move target_list out of base decoder attributes
cxl/mem: Add the cxl_mem driver
cxl/core/port: Add switch port enumeration
cxl/memdev: Add numa_node attribute
cxl/pci: Emit device serial number
cxl/pci: Implement wait for media active
...
|
||
|
Linus Torvalds
|
52deda9551 |
Merge branch 'akpm' (patches from Andrew)
Merge more updates from Andrew Morton: "Various misc subsystems, before getting into the post-linux-next material. 41 patches. Subsystems affected by this patch series: procfs, misc, core-kernel, lib, checkpatch, init, pipe, minix, fat, cgroups, kexec, kdump, taskstats, panic, kcov, resource, and ubsan" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (41 commits) Revert "ubsan, kcsan: Don't combine sanitizer with kcov on clang" kernel/resource: fix kfree() of bootmem memory again kcov: properly handle subsequent mmap calls kcov: split ioctl handling into locked and unlocked parts panic: move panic_print before kmsg dumpers panic: add option to dump all CPUs backtraces in panic_print docs: sysctl/kernel: add missing bit to panic_print taskstats: remove unneeded dead assignment kasan: no need to unset panic_on_warn in end_report() ubsan: no need to unset panic_on_warn in ubsan_epilogue() panic: unset panic_on_warn inside panic() docs: kdump: add scp example to write out the dump file docs: kdump: update description about sysfs file system support arm64: mm: use IS_ENABLED(CONFIG_KEXEC_CORE) instead of #ifdef x86/setup: use IS_ENABLED(CONFIG_KEXEC_CORE) instead of #ifdef riscv: mm: init: use IS_ENABLED(CONFIG_KEXEC_CORE) instead of #ifdef kexec: make crashk_res, crashk_low_res and crash_notes symbols always visible cgroup: use irqsave in cgroup_rstat_flush_locked(). fat: use pointer to simple type in put_user() minix: fix bug when opening a file with O_DIRECT ... |
||
|
Linus Torvalds
|
169e77764a |
Networking changes for 5.18.
Core
----
- Introduce XDP multi-buffer support, allowing the use of XDP with
jumbo frame MTUs and combination with Rx coalescing offloads (LRO).
- Speed up netns dismantling (5x) and lower the memory cost a little.
Remove unnecessary per-netns sockets. Scope some lists to a netns.
Cut down RCU syncing. Use batch methods. Allow netdev registration
to complete out of order.
- Support distinguishing timestamp types (ingress vs egress) and
maintaining them across packet scrubbing points (e.g. redirect).
- Continue the work of annotating packet drop reasons throughout
the stack.
- Switch netdev error counters from an atomic to dynamically
allocated per-CPU counters.
- Rework a few preempt_disable(), local_irq_save() and busy waiting
sections problematic on PREEMPT_RT.
- Extend the ref_tracker to allow catching use-after-free bugs.
BPF
---
- Introduce "packing allocator" for BPF JIT images. JITed code is
marked read only, and used to be allocated at page granularity.
Custom allocator allows for more efficient memory use, lower
iTLB pressure and prevents identity mapping huge pages from
getting split.
- Make use of BTF type annotations (e.g. __user, __percpu) to enforce
the correct probe read access method, add appropriate helpers.
- Convert the BPF preload to use light skeleton and drop
the user-mode-driver dependency.
- Allow XDP BPF_PROG_RUN test infra to send real packets, enabling
its use as a packet generator.
- Allow local storage memory to be allocated with GFP_KERNEL if called
from a hook allowed to sleep.
- Introduce fprobe (multi kprobe) to speed up mass attachment (arch
bits to come later).
- Add unstable conntrack lookup helpers for BPF by using the BPF
kfunc infra.
- Allow cgroup BPF progs to return custom errors to user space.
- Add support for AF_UNIX iterator batching.
- Allow iterator programs to use sleepable helpers.
- Support JIT of add, and, or, xor and xchg atomic ops on arm64.
- Add BTFGen support to bpftool which allows to use CO-RE in kernels
without BTF info.
- Large number of libbpf API improvements, cleanups and deprecations.
Protocols
---------
- Micro-optimize UDPv6 Tx, gaining up to 5% in test on dummy netdev.
- Adjust TSO packet sizes based on min_rtt, allowing very low latency
links (data centers) to always send full-sized TSO super-frames.
- Make IPv6 flow label changes (AKA hash rethink) more configurable,
via sysctl and setsockopt. Distinguish between server and client
behavior.
- VxLAN support to "collect metadata" devices to terminate only
configured VNIs. This is similar to VLAN filtering in the bridge.
- Support inserting IPv6 IOAM information to a fraction of frames.
- Add protocol attribute to IP addresses to allow identifying where
given address comes from (kernel-generated, DHCP etc.)
- Support setting socket and IPv6 options via cmsg on ping6 sockets.
- Reject mis-use of ECN bits in IP headers as part of DSCP/TOS.
Define dscp_t and stop taking ECN bits into account in fib-rules.
- Add support for locked bridge ports (for 802.1X).
- tun: support NAPI for packets received from batched XDP buffs,
doubling the performance in some scenarios.
- IPv6 extension header handling in Open vSwitch.
- Support IPv6 control message load balancing in bonding, prevent
neighbor solicitation and advertisement from using the wrong port.
Support NS/NA monitor selection similar to existing ARP monitor.
- SMC
- improve performance with TCP_CORK and sendfile()
- support auto-corking
- support TCP_NODELAY
- MCTP (Management Component Transport Protocol)
- add user space tag control interface
- I2C binding driver (as specified by DMTF DSP0237)
- Multi-BSSID beacon handling in AP mode for WiFi.
- Bluetooth:
- handle MSFT Monitor Device Event
- add MGMT Adv Monitor Device Found/Lost events
- Multi-Path TCP:
- add support for the SO_SNDTIMEO socket option
- lots of selftest cleanups and improvements
- Increase the max PDU size in CAN ISOTP to 64 kB.
Driver API
----------
- Add HW counters for SW netdevs, a mechanism for devices which
offload packet forwarding to report packet statistics back to
software interfaces such as tunnels.
- Select the default NIC queue count as a fraction of number of
physical CPU cores, instead of hard-coding to 8.
- Expose devlink instance locks to drivers. Allow device layer of
drivers to use that lock directly instead of creating their own
which always runs into ordering issues in devlink callbacks.
- Add header/data split indication to guide user space enabling
of TCP zero-copy Rx.
- Allow configuring completion queue event size.
- Refactor page_pool to enable fragmenting after allocation.
- Add allocation and page reuse statistics to page_pool.
- Improve Multiple Spanning Trees support in the bridge to allow
reuse of topologies across VLANs, saving HW resources in switches.
- DSA (Distributed Switch Architecture):
- replay and offload of host VLAN entries
- offload of static and local FDB entries on LAG interfaces
- FDB isolation and unicast filtering
New hardware / drivers
----------------------
- Ethernet:
- LAN937x T1 PHYs
- Davicom DM9051 SPI NIC driver
- Realtek RTL8367S, RTL8367RB-VB switch and MDIO
- Microchip ksz8563 switches
- Netronome NFP3800 SmartNICs
- Fungible SmartNICs
- MediaTek MT8195 switches
- WiFi:
- mt76: MediaTek mt7916
- mt76: MediaTek mt7921u USB adapters
- brcmfmac: Broadcom BCM43454/6
- Mobile:
- iosm: Intel M.2 7360 WWAN card
Drivers
-------
- Convert many drivers to the new phylink API built for split PCS
designs but also simplifying other cases.
- Intel Ethernet NICs:
- add TTY for GNSS module for E810T device
- improve AF_XDP performance
- GTP-C and GTP-U filter offload
- QinQ VLAN support
- Mellanox Ethernet NICs (mlx5):
- support xdp->data_meta
- multi-buffer XDP
- offload tc push_eth and pop_eth actions
- Netronome Ethernet NICs (nfp):
- flow-independent tc action hardware offload (police / meter)
- AF_XDP
- Other Ethernet NICs:
- at803x: fiber and SFP support
- xgmac: mdio: preamble suppression and custom MDC frequencies
- r8169: enable ASPM L1.2 if system vendor flags it as safe
- macb/gem: ZynqMP SGMII
- hns3: add TX push mode
- dpaa2-eth: software TSO
- lan743x: multi-queue, mdio, SGMII, PTP
- axienet: NAPI and GRO support
- Mellanox Ethernet switches (mlxsw):
- source and dest IP address rewrites
- RJ45 ports
- Marvell Ethernet switches (prestera):
- basic routing offload
- multi-chain TC ACL offload
- NXP embedded Ethernet switches (ocelot & felix):
- PTP over UDP with the ocelot-8021q DSA tagging protocol
- basic QoS classification on Felix DSA switch using dcbnl
- port mirroring for ocelot switches
- Microchip high-speed industrial Ethernet (sparx5):
- offloading of bridge port flooding flags
- PTP Hardware Clock
- Other embedded switches:
- lan966x: PTP Hardward Clock
- qca8k: mdio read/write operations via crafted Ethernet packets
- Qualcomm 802.11ax WiFi (ath11k):
- add LDPC FEC type and 802.11ax High Efficiency data in radiotap
- enable RX PPDU stats in monitor co-exist mode
- Intel WiFi (iwlwifi):
- UHB TAS enablement via BIOS
- band disablement via BIOS
- channel switch offload
- 32 Rx AMPDU sessions in newer devices
- MediaTek WiFi (mt76):
- background radar detection
- thermal management improvements on mt7915
- SAR support for more mt76 platforms
- MBSSID and 6 GHz band on mt7915
- RealTek WiFi:
- rtw89: AP mode
- rtw89: 160 MHz channels and 6 GHz band
- rtw89: hardware scan
- Bluetooth:
- mt7921s: wake on Bluetooth, SCO over I2S, wide-band-speed (WBS)
- Microchip CAN (mcp251xfd):
- multiple RX-FIFOs and runtime configurable RX/TX rings
- internal PLL, runtime PM handling simplification
- improve chip detection and error handling after wakeup
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=ELpe
-----END PGP SIGNATURE-----
Merge tag 'net-next-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Jakub Kicinski:
"The sprinkling of SPI drivers is because we added a new one and Mark
sent us a SPI driver interface conversion pull request.
Core
----
- Introduce XDP multi-buffer support, allowing the use of XDP with
jumbo frame MTUs and combination with Rx coalescing offloads (LRO).
- Speed up netns dismantling (5x) and lower the memory cost a little.
Remove unnecessary per-netns sockets. Scope some lists to a netns.
Cut down RCU syncing. Use batch methods. Allow netdev registration
to complete out of order.
- Support distinguishing timestamp types (ingress vs egress) and
maintaining them across packet scrubbing points (e.g. redirect).
- Continue the work of annotating packet drop reasons throughout the
stack.
- Switch netdev error counters from an atomic to dynamically
allocated per-CPU counters.
- Rework a few preempt_disable(), local_irq_save() and busy waiting
sections problematic on PREEMPT_RT.
- Extend the ref_tracker to allow catching use-after-free bugs.
BPF
---
- Introduce "packing allocator" for BPF JIT images. JITed code is
marked read only, and used to be allocated at page granularity.
Custom allocator allows for more efficient memory use, lower iTLB
pressure and prevents identity mapping huge pages from getting
split.
- Make use of BTF type annotations (e.g. __user, __percpu) to enforce
the correct probe read access method, add appropriate helpers.
- Convert the BPF preload to use light skeleton and drop the
user-mode-driver dependency.
- Allow XDP BPF_PROG_RUN test infra to send real packets, enabling
its use as a packet generator.
- Allow local storage memory to be allocated with GFP_KERNEL if
called from a hook allowed to sleep.
- Introduce fprobe (multi kprobe) to speed up mass attachment (arch
bits to come later).
- Add unstable conntrack lookup helpers for BPF by using the BPF
kfunc infra.
- Allow cgroup BPF progs to return custom errors to user space.
- Add support for AF_UNIX iterator batching.
- Allow iterator programs to use sleepable helpers.
- Support JIT of add, and, or, xor and xchg atomic ops on arm64.
- Add BTFGen support to bpftool which allows to use CO-RE in kernels
without BTF info.
- Large number of libbpf API improvements, cleanups and deprecations.
Protocols
---------
- Micro-optimize UDPv6 Tx, gaining up to 5% in test on dummy netdev.
- Adjust TSO packet sizes based on min_rtt, allowing very low latency
links (data centers) to always send full-sized TSO super-frames.
- Make IPv6 flow label changes (AKA hash rethink) more configurable,
via sysctl and setsockopt. Distinguish between server and client
behavior.
- VxLAN support to "collect metadata" devices to terminate only
configured VNIs. This is similar to VLAN filtering in the bridge.
- Support inserting IPv6 IOAM information to a fraction of frames.
- Add protocol attribute to IP addresses to allow identifying where
given address comes from (kernel-generated, DHCP etc.)
- Support setting socket and IPv6 options via cmsg on ping6 sockets.
- Reject mis-use of ECN bits in IP headers as part of DSCP/TOS.
Define dscp_t and stop taking ECN bits into account in fib-rules.
- Add support for locked bridge ports (for 802.1X).
- tun: support NAPI for packets received from batched XDP buffs,
doubling the performance in some scenarios.
- IPv6 extension header handling in Open vSwitch.
- Support IPv6 control message load balancing in bonding, prevent
neighbor solicitation and advertisement from using the wrong port.
Support NS/NA monitor selection similar to existing ARP monitor.
- SMC
- improve performance with TCP_CORK and sendfile()
- support auto-corking
- support TCP_NODELAY
- MCTP (Management Component Transport Protocol)
- add user space tag control interface
- I2C binding driver (as specified by DMTF DSP0237)
- Multi-BSSID beacon handling in AP mode for WiFi.
- Bluetooth:
- handle MSFT Monitor Device Event
- add MGMT Adv Monitor Device Found/Lost events
- Multi-Path TCP:
- add support for the SO_SNDTIMEO socket option
- lots of selftest cleanups and improvements
- Increase the max PDU size in CAN ISOTP to 64 kB.
Driver API
----------
- Add HW counters for SW netdevs, a mechanism for devices which
offload packet forwarding to report packet statistics back to
software interfaces such as tunnels.
- Select the default NIC queue count as a fraction of number of
physical CPU cores, instead of hard-coding to 8.
- Expose devlink instance locks to drivers. Allow device layer of
drivers to use that lock directly instead of creating their own
which always runs into ordering issues in devlink callbacks.
- Add header/data split indication to guide user space enabling of
TCP zero-copy Rx.
- Allow configuring completion queue event size.
- Refactor page_pool to enable fragmenting after allocation.
- Add allocation and page reuse statistics to page_pool.
- Improve Multiple Spanning Trees support in the bridge to allow
reuse of topologies across VLANs, saving HW resources in switches.
- DSA (Distributed Switch Architecture):
- replay and offload of host VLAN entries
- offload of static and local FDB entries on LAG interfaces
- FDB isolation and unicast filtering
New hardware / drivers
----------------------
- Ethernet:
- LAN937x T1 PHYs
- Davicom DM9051 SPI NIC driver
- Realtek RTL8367S, RTL8367RB-VB switch and MDIO
- Microchip ksz8563 switches
- Netronome NFP3800 SmartNICs
- Fungible SmartNICs
- MediaTek MT8195 switches
- WiFi:
- mt76: MediaTek mt7916
- mt76: MediaTek mt7921u USB adapters
- brcmfmac: Broadcom BCM43454/6
- Mobile:
- iosm: Intel M.2 7360 WWAN card
Drivers
-------
- Convert many drivers to the new phylink API built for split PCS
designs but also simplifying other cases.
- Intel Ethernet NICs:
- add TTY for GNSS module for E810T device
- improve AF_XDP performance
- GTP-C and GTP-U filter offload
- QinQ VLAN support
- Mellanox Ethernet NICs (mlx5):
- support xdp->data_meta
- multi-buffer XDP
- offload tc push_eth and pop_eth actions
- Netronome Ethernet NICs (nfp):
- flow-independent tc action hardware offload (police / meter)
- AF_XDP
- Other Ethernet NICs:
- at803x: fiber and SFP support
- xgmac: mdio: preamble suppression and custom MDC frequencies
- r8169: enable ASPM L1.2 if system vendor flags it as safe
- macb/gem: ZynqMP SGMII
- hns3: add TX push mode
- dpaa2-eth: software TSO
- lan743x: multi-queue, mdio, SGMII, PTP
- axienet: NAPI and GRO support
- Mellanox Ethernet switches (mlxsw):
- source and dest IP address rewrites
- RJ45 ports
- Marvell Ethernet switches (prestera):
- basic routing offload
- multi-chain TC ACL offload
- NXP embedded Ethernet switches (ocelot & felix):
- PTP over UDP with the ocelot-8021q DSA tagging protocol
- basic QoS classification on Felix DSA switch using dcbnl
- port mirroring for ocelot switches
- Microchip high-speed industrial Ethernet (sparx5):
- offloading of bridge port flooding flags
- PTP Hardware Clock
- Other embedded switches:
- lan966x: PTP Hardward Clock
- qca8k: mdio read/write operations via crafted Ethernet packets
- Qualcomm 802.11ax WiFi (ath11k):
- add LDPC FEC type and 802.11ax High Efficiency data in radiotap
- enable RX PPDU stats in monitor co-exist mode
- Intel WiFi (iwlwifi):
- UHB TAS enablement via BIOS
- band disablement via BIOS
- channel switch offload
- 32 Rx AMPDU sessions in newer devices
- MediaTek WiFi (mt76):
- background radar detection
- thermal management improvements on mt7915
- SAR support for more mt76 platforms
- MBSSID and 6 GHz band on mt7915
- RealTek WiFi:
- rtw89: AP mode
- rtw89: 160 MHz channels and 6 GHz band
- rtw89: hardware scan
- Bluetooth:
- mt7921s: wake on Bluetooth, SCO over I2S, wide-band-speed (WBS)
- Microchip CAN (mcp251xfd):
- multiple RX-FIFOs and runtime configurable RX/TX rings
- internal PLL, runtime PM handling simplification
- improve chip detection and error handling after wakeup"
* tag 'net-next-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2521 commits)
llc: fix netdevice reference leaks in llc_ui_bind()
drivers: ethernet: cpsw: fix panic when interrupt coaleceing is set via ethtool
ice: don't allow to run ice_send_event_to_aux() in atomic ctx
ice: fix 'scheduling while atomic' on aux critical err interrupt
net/sched: fix incorrect vlan_push_eth dest field
net: bridge: mst: Restrict info size queries to bridge ports
net: marvell: prestera: add missing destroy_workqueue() in prestera_module_init()
drivers: net: xgene: Fix regression in CRC stripping
net: geneve: add missing netlink policy and size for IFLA_GENEVE_INNER_PROTO_INHERIT
net: dsa: fix missing host-filtered multicast addresses
net/mlx5e: Fix build warning, detected write beyond size of field
iwlwifi: mvm: Don't fail if PPAG isn't supported
selftests/bpf: Fix kprobe_multi test.
Revert "rethook: x86: Add rethook x86 implementation"
Revert "arm64: rethook: Add arm64 rethook implementation"
Revert "powerpc: Add rethook support"
Revert "ARM: rethook: Add rethook arm implementation"
netdevice: add missing dm_private kdoc
net: bridge: mst: prevent NULL deref in br_mst_info_size()
selftests: forwarding: Use same VRF for port and VLAN upper
...
|
||
Marco Elver
|
b027471ada |
Revert "ubsan, kcsan: Don't combine sanitizer with kcov on clang"
This reverts commit |
||
Tiezhu Yang
|
d83ce027a5 |
ubsan: no need to unset panic_on_warn in ubsan_epilogue()
panic_on_warn is unset inside panic(), so no need to unset it before calling panic() in ubsan_epilogue(). Link: https://lkml.kernel.org/r/1644324666-15947-5-git-send-email-yangtiezhu@loongson.cn Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn> Reviewed-by: Marco Elver <elver@google.com> Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com> Cc: Baoquan He <bhe@redhat.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Xuefeng Li <lixuefeng@loongson.cn> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
Randy Dunlap
|
2699e5143c |
lib: bitmap: fix many kernel-doc warnings
Fix kernel-doc warings in lib/bitmap.c: lib/bitmap.c:498: warning: Function parameter or member 'buf' not described in 'bitmap_print_to_buf' lib/bitmap.c:498: warning: Function parameter or member 'maskp' not described in 'bitmap_print_to_buf' lib/bitmap.c:498: warning: Function parameter or member 'nmaskbits' not described in 'bitmap_print_to_buf' lib/bitmap.c:498: warning: Function parameter or member 'off' not described in 'bitmap_print_to_buf' lib/bitmap.c:498: warning: Function parameter or member 'count' not described in 'bitmap_print_to_buf' lib/bitmap.c:561: warning: contents before sections lib/bitmap.c:606: warning: Function parameter or member 'buf' not described in 'bitmap_print_list_to_buf' lib/bitmap.c:606: warning: Function parameter or member 'maskp' not described in 'bitmap_print_list_to_buf' lib/bitmap.c:606: warning: Function parameter or member 'nmaskbits' not described in 'bitmap_print_list_to_buf' lib/bitmap.c:606: warning: Function parameter or member 'off' not described in 'bitmap_print_list_to_buf' lib/bitmap.c:606: warning: Function parameter or member 'count' not described in 'bitmap_print_list_to_buf' lib/bitmap.c:819: warning: missing initial short description on line: * bitmap_parselist_user() This still leaves 15 warnings for function return values not described, similar to this one: bitmap.c:890: warning: No description found for return value of 'bitmap_parse' Link: https://lkml.kernel.org/r/20220306065823.5153-1-rdunlap@infradead.org Fixes: |
||
Feng Tang
|
1bf18da621 |
lib/Kconfig.debug: add ARCH dependency for FUNCTION_ALIGN option
0Day robots reported there is compiling issue for 'csky' ARCH when
CONFIG_DEBUG_FORCE_DATA_SECTION_ALIGNED is enabled [1]:
All errors (new ones prefixed by >>):
{standard input}: Assembler messages:
>> {standard input}:2277: Error: pcrel offset for branch to .LS000B too far (0x3c)
Which was discussed in [2]. And as there is no solution for csky yet, add
some dependency for this config to limit it to several ARCHs which have no
compiling issue so far.
[1]. https://lore.kernel.org/lkml/202202271612.W32UJAj2-lkp@intel.com/
[2]. https://www.spinics.net/lists/linux-kbuild/msg30298.html
Link: https://lkml.kernel.org/r/20220304021100.GN4548@shbuild999.sh.intel.com
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Feng Tang <feng.tang@intel.com>
Cc: Guo Ren <guoren@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
||
Kees Cook
|
f9b3cd2457 |
Kconfig.debug: make DEBUG_INFO selectable from a choice
Currently it's not possible to enable DEBUG_INFO for an all*config build, since it is marked as "depends on !COMPILE_TEST". This generally makes sense because a debug build of an all*config target ends up taking much longer and the output is much larger. Having this be "default off" makes sense. However, there are cases where enabling DEBUG_INFO for such builds is useful for doing treewide A/B comparisons of build options, etc. Make DEBUG_INFO selectable from any of the DWARF version choice options, with DEBUG_INFO_NONE being the default for COMPILE_TEST. The mutually exclusive relationship between DWARF5 and BTF must be inverted, but the result remains the same. Additionally moves DEBUG_KERNEL and DEBUG_MISC up to the top of the menu because they were enabling features _above_ it, making it weird to navigate menuconfig. [keescook@chromium.org: make DEBUG_INFO always default=n] Link: https://lkml.kernel.org/r/20220128214131.580131-1-keescook@chromium.org Link: https://lore.kernel.org/lkml/YfRY6+CaQxX7O8vF@dev-arch.archlinux-ax161 Link: https://lkml.kernel.org/r/20220125075126.891825-1-keescook@chromium.org Signed-off-by: Kees Cook <keescook@chromium.org> Suggested-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Nathan Chancellor <nathan@kernel.org> Reviewed-by: Nick Desaulniers <ndesaulniers@google.com> Tested-by: Nick Desaulniers <ndesaulniers@google.com> Reviewed-by: Masahiro Yamada <masahiroy@kernel.org> Cc: Nick Desaulniers <ndesaulniers@google.com> Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Linus Torvalds
|
194dfe88d6 |
asm-generic updates for 5.18
There are three sets of updates for 5.18 in the asm-generic tree:
- The set_fs()/get_fs() infrastructure gets removed for good. This
was already gone from all major architectures, but now we can
finally remove it everywhere, which loses some particularly
tricky and error-prone code.
There is a small merge conflict against a parisc cleanup, the
solution is to use their new version.
- The nds32 architecture ends its tenure in the Linux kernel. The
hardware is still used and the code is in reasonable shape, but
the mainline port is not actively maintained any more, as all
remaining users are thought to run vendor kernels that would never
be updated to a future release.
There are some obvious conflicts against changes to the removed
files.
- A series from Masahiro Yamada cleans up some of the uapi header
files to pass the compile-time checks.
-----BEGIN PGP SIGNATURE-----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=vtCN
-----END PGP SIGNATURE-----
Merge tag 'asm-generic-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic
Pull asm-generic updates from Arnd Bergmann:
"There are three sets of updates for 5.18 in the asm-generic tree:
- The set_fs()/get_fs() infrastructure gets removed for good.
This was already gone from all major architectures, but now we can
finally remove it everywhere, which loses some particularly tricky
and error-prone code. There is a small merge conflict against a
parisc cleanup, the solution is to use their new version.
- The nds32 architecture ends its tenure in the Linux kernel.
The hardware is still used and the code is in reasonable shape, but
the mainline port is not actively maintained any more, as all
remaining users are thought to run vendor kernels that would never
be updated to a future release.
- A series from Masahiro Yamada cleans up some of the uapi header
files to pass the compile-time checks"
* tag 'asm-generic-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic: (27 commits)
nds32: Remove the architecture
uaccess: remove CONFIG_SET_FS
ia64: remove CONFIG_SET_FS support
sh: remove CONFIG_SET_FS support
sparc64: remove CONFIG_SET_FS support
lib/test_lockup: fix kernel pointer check for separate address spaces
uaccess: generalize access_ok()
uaccess: fix type mismatch warnings from access_ok()
arm64: simplify access_ok()
m68k: fix access_ok for coldfire
MIPS: use simpler access_ok()
MIPS: Handle address errors for accesses above CPU max virtual user address
uaccess: add generic __{get,put}_kernel_nofault
nios2: drop access_ok() check from __put_user()
x86: use more conventional access_ok() definition
x86: remove __range_not_ok()
sparc64: add __{get,put}_kernel_nofault()
nds32: fix access_ok() checks in get/put_user
uaccess: fix nios2 and microblaze get_user_8()
sparc64: fix building assembly files
...
|
||
|
Linus Torvalds
|
d51b1b33c5 |
linux-kselftest-kunit-5.18-rc1
This KUnit update for Linux 5.18-rc1 consists of: - changes to decrease macro layering string, integer, EQ/NE asserts - remove unused macros - several cleanups and fixes - new list tests for list_del_init_careful(), list_is_head() and list_entry_is_head() -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEPZKym/RZuOCGeA/kCwJExA0NQxwFAmI5KcsACgkQCwJExA0N Qxy37BAA4NKkZHOpIk3P+aHbqE/S+Utg+gHsFOS7srp8wTeM1nSVMCP7MYefBiRs 4+R6RViCAvd5skK5/4UkYp53KePOww4Qo5zZKfN5J+479juMk+8CJtk3QwgY0IAu jaI3nZlvo+WW+2OdIXdYNNScLR5mKHVSxpoLs1KtJZXm62RQgycoGCrIEtiAKYTk w2mMUxG4X0upIF08xTfb5UDQyyMjqWMZJZ0l65xsJr4bgU+It0HoYCmPzqufpGza ZgTWac8Iai1sEzxPXaTMLCM6V3QlbESIaIB6J13BWS+OvKs7cbcIADnG79Nvh7eH v8v9fXTojlS6vSNJUqxA8S0f2kGJ2mVmePg11ZeOh2oqaF6l1bs7iFJQPc3PidRl /dobIMBGlEI2yi9vaRz6/roDp44K56OlbthtSlaEc1NLyI/+nGuG7hzXuXkmoNiX LloMfTmcCtrWGUnZH80K18l03T1swEiKzLuYMlzNvVz7jiIoZhXw4YG8H2FHJrpf 9LOJFEJgVcCp5JmDTk19HwN1OogH8TcbaJkQE0EthxExb2LW5BfO9cXzQ/n+uapl QoN+5ig1x2ozyplVOhz/6VbmKxf7EDEOiYr1F1Kbc5qdSm1kdRQQTrMaWJkQ+KzT bo+yWr/2zkAqrCns5lbUERfhBSx9jZqcnmUPcdcXLd7qse0cnKc= =e1/u -----END PGP SIGNATURE----- Merge tag 'linux-kselftest-kunit-5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest Pull KUnit updates from Shuah Khan: - changes to decrease macro layering string, integer, EQ/NE asserts - remove unused macros - several cleanups and fixes - new list tests for list_del_init_careful(), list_is_head() and list_entry_is_head() * tag 'linux-kselftest-kunit-5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: list: test: Add a test for list_entry_is_head() list: test: Add a test for list_is_head() list: test: Add test for list_del_init_careful() kunit: cleanup assertion macro internal variables kunit: factor out str constants from binary assertion structs kunit: consolidate KUNIT_INIT_BINARY_ASSERT_STRUCT macros kunit: remove va_format from kunit_assert kunit: tool: drop mostly unused KunitResult.result field kunit: decrease macro layering for EQ/NE asserts kunit: decrease macro layering for integer asserts kunit: reduce layering in string assertion macros kunit: drop unused intermediate macros for ptr inequality checks kunit: make KUNIT_EXPECT_EQ() use KUNIT_EXPECT_EQ_MSG(), etc. kunit: drop unused assert_type from kunit_assert and clean up macros kunit: split out part of kunit_assert into a static const kunit: factor out kunit_base_assert_format() call into kunit_fail() kunit: drop unused kunit* field in kunit_assert kunit: move check if assertion passed into the macros kunit: add example test case showing off all the expect macros |
||
|
Linus Torvalds
|
3ef4ea3d84 |
printk changes for 5.18
-----BEGIN PGP SIGNATURE----- iQIzBAABCAAdFiEESH4wyp42V4tXvYsjUqAMR0iAlPIFAmI4ggsACgkQUqAMR0iA lPLrlA//R12HGCGSzdpdyynl+5wByIqcHe8RANHOAj9f9qxBtmYv2ZK69mzSvhHO 6kAGdb3vBtxo1NCHeqxlXpds9GP/zOGEWmEJP2P7pIZ8ci8QtwrXCtQ8XIW9UGhJ WHzXpXkfzcIDsRZs6B1pxN5cRXuW2VVzfgxyu6L+hvNV0o0PPO4A48ptzNBZh8rj URAid+n/aGs9SOXM0h8SRjjBYEqjiB2RZ3gLg5XGZmcATtitBO135LGZnBR2fwnX RZKckbdA/fBzqS4Njsp2rV5Rqldwj7mHzQbcsQm4YDrxSdl8d78XxQdAA5sNyaCD ToDw6/DeegXzgtPJpuBH/ymF9RczIu4l3eawO1FBMCB5EPq56zVHWErxry8qaTgi yQFqhBgifNN5NqfQCn7dyF10usmsvImFczre7ZxJvL7vmzqDsYYqdZG5oouLudR4 iOphFwX71v4X+RsxbOXqEt+mS3AwqEJc1SZl5rrDc4TSUOE1qCd+ncLTAuAf3Wfm 1xaZ+siomahcZAKrgmSw6AcD5bU+JJpr6FktKAddiO7J1+nIdT1lYEbpUsfWZ/p8 Kx8A2M2ula+whJ6CgtnGTsbsacsFi+j/MioMTGZIU+Fubkig3XEeIp3QUO6sEN+9 /sUQ6Wj6c95miWdttff9o6ap8py9NbfuKIw/HMOesfLVKP82rmw= =EUpJ -----END PGP SIGNATURE----- Merge tag 'printk-for-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux Pull printk updates from Petr Mladek: - Make %pK behave the same as %p for kptr_restrict == 0 also with no_hash_pointers parameter - Ignore the default console in the device tree also when console=null or console="" is used on the command line - Document console=null and console="" behavior - Prevent a deadlock and a livelock caused by console_lock in panic() - Make console_lock available for panicking CPU - Fast query for the next to-be-used sequence number - Use the expected return values in printk.devkmsg __setup handler - Use the correct atomic operations in wake_up_klogd() irq_work handler - Avoid possible unaligned access when handling %4cc printing format * tag 'printk-for-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux: printk: fix return value of printk.devkmsg __setup handler vsprintf: Fix %pK with kptr_restrict == 0 printk: make suppress_panic_printk static printk: Set console_set_on_cmdline=1 when __add_preferred_console() is called with user_specified == true Docs: printk: add 'console=null|""' to admin/kernel-parameters printk: use atomic updates for klogd work printk: Drop console_sem during panic printk: Avoid livelock with heavy printk during panic printk: disable optimistic spin during panic printk: Add panic_in_progress helper vsprintf: Move space out of string literals in fourcc_string() vsprintf: Fix potential unaligned access printk: ringbuffer: Improve prb_next_seq() performance |
||
|
Linus Torvalds
|
9030fb0bb9 |
Folio changes for 5.18
- Rewrite how munlock works to massively reduce the contention
on i_mmap_rwsem (Hugh Dickins):
https://lore.kernel.org/linux-mm/8e4356d-9622-a7f0-b2c-f116b5f2efea@google.com/
- Sort out the page refcount mess for ZONE_DEVICE pages (Christoph Hellwig):
https://lore.kernel.org/linux-mm/20220210072828.2930359-1-hch@lst.de/
- Convert GUP to use folios and make pincount available for order-1
pages. (Matthew Wilcox)
- Convert a few more truncation functions to use folios (Matthew Wilcox)
- Convert page_vma_mapped_walk to use PFNs instead of pages (Matthew Wilcox)
- Convert rmap_walk to use folios (Matthew Wilcox)
- Convert most of shrink_page_list() to use a folio (Matthew Wilcox)
- Add support for creating large folios in readahead (Matthew Wilcox)
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEejHryeLBw/spnjHrDpNsjXcpgj4FAmI4ucgACgkQDpNsjXcp
gj69Wgf6AwqwmO5Tmy+fLScDPqWxmXJofbocae1kyoGHf7Ui91OK4U2j6IpvAr+g
P/vLIK+JAAcTQcrSCjymuEkf4HkGZOR03QQn7maPIEe4eLrZRQDEsmHC1L9gpeJp
s/GMvDWiGE0Tnxu0EOzfVi/yT+qjIl/S8VvqtCoJv1HdzxitZ7+1RDuqImaMC5MM
Qi3uHag78vLmCltLXpIOdpgZhdZexCdL2Y/1npf+b6FVkAJRRNUnA0gRbS7YpoVp
CbxEJcmAl9cpJLuj5i5kIfS9trr+/QcvbUlzRxh4ggC58iqnmF2V09l2MJ7YU3XL
v1O/Elq4lRhXninZFQEm9zjrri7LDQ==
=n9Ad
-----END PGP SIGNATURE-----
Merge tag 'folio-5.18c' of git://git.infradead.org/users/willy/pagecache
Pull folio updates from Matthew Wilcox:
- Rewrite how munlock works to massively reduce the contention on
i_mmap_rwsem (Hugh Dickins):
https://lore.kernel.org/linux-mm/8e4356d-9622-a7f0-b2c-f116b5f2efea@google.com/
- Sort out the page refcount mess for ZONE_DEVICE pages (Christoph
Hellwig):
https://lore.kernel.org/linux-mm/20220210072828.2930359-1-hch@lst.de/
- Convert GUP to use folios and make pincount available for order-1
pages. (Matthew Wilcox)
- Convert a few more truncation functions to use folios (Matthew
Wilcox)
- Convert page_vma_mapped_walk to use PFNs instead of pages (Matthew
Wilcox)
- Convert rmap_walk to use folios (Matthew Wilcox)
- Convert most of shrink_page_list() to use a folio (Matthew Wilcox)
- Add support for creating large folios in readahead (Matthew Wilcox)
* tag 'folio-5.18c' of git://git.infradead.org/users/willy/pagecache: (114 commits)
mm/damon: minor cleanup for damon_pa_young
selftests/vm/transhuge-stress: Support file-backed PMD folios
mm/filemap: Support VM_HUGEPAGE for file mappings
mm/readahead: Switch to page_cache_ra_order
mm/readahead: Align file mappings for non-DAX
mm/readahead: Add large folio readahead
mm: Support arbitrary THP sizes
mm: Make large folios depend on THP
mm: Fix READ_ONLY_THP warning
mm/filemap: Allow large folios to be added to the page cache
mm: Turn can_split_huge_page() into can_split_folio()
mm/vmscan: Convert pageout() to take a folio
mm/vmscan: Turn page_check_references() into folio_check_references()
mm/vmscan: Account large folios correctly
mm/vmscan: Optimise shrink_page_list for non-PMD-sized folios
mm/vmscan: Free non-shmem folios without splitting them
mm/rmap: Constify the rmap_walk_control argument
mm/rmap: Convert rmap_walk() to take a folio
mm: Turn page_anon_vma() into folio_anon_vma()
mm/rmap: Turn page_lock_anon_vma_read() into folio_lock_anon_vma_read()
...
|
||
|
Linus Torvalds
|
3bf03b9a08 |
Merge branch 'akpm' (patches from Andrew)
Merge updates from Andrew Morton:
- A few misc subsystems: kthread, scripts, ntfs, ocfs2, block, and vfs
- Most the MM patches which precede the patches in Willy's tree: kasan,
pagecache, gup, swap, shmem, memcg, selftests, pagemap, mremap,
sparsemem, vmalloc, pagealloc, memory-failure, mlock, hugetlb,
userfaultfd, vmscan, compaction, mempolicy, oom-kill, migration, thp,
cma, autonuma, psi, ksm, page-poison, madvise, memory-hotplug, rmap,
zswap, uaccess, ioremap, highmem, cleanups, kfence, hmm, and damon.
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (227 commits)
mm/damon/sysfs: remove repeat container_of() in damon_sysfs_kdamond_release()
Docs/ABI/testing: add DAMON sysfs interface ABI document
Docs/admin-guide/mm/damon/usage: document DAMON sysfs interface
selftests/damon: add a test for DAMON sysfs interface
mm/damon/sysfs: support DAMOS stats
mm/damon/sysfs: support DAMOS watermarks
mm/damon/sysfs: support schemes prioritization
mm/damon/sysfs: support DAMOS quotas
mm/damon/sysfs: support DAMON-based Operation Schemes
mm/damon/sysfs: support the physical address space monitoring
mm/damon/sysfs: link DAMON for virtual address spaces monitoring
mm/damon: implement a minimal stub for sysfs-based DAMON interface
mm/damon/core: add number of each enum type values
mm/damon/core: allow non-exclusive DAMON start/stop
Docs/damon: update outdated term 'regions update interval'
Docs/vm/damon/design: update DAMON-Idle Page Tracking interference handling
Docs/vm/damon: call low level monitoring primitives the operations
mm/damon: remove unnecessary CONFIG_DAMON option
mm/damon/paddr,vaddr: remove damon_{p,v}a_{target_valid,set_operations}()
mm/damon/dbgfs-test: fix is_target_id() change
...
|
||
|
Marco Elver
|
737b6a10ac |
kfence: allow use of a deferrable timer
Allow the use of a deferrable timer, which does not force CPU wake-ups when the system is idle. A consequence is that the sample interval becomes very unpredictable, to the point that it is not guaranteed that the KFENCE KUnit test still passes. Nevertheless, on power-constrained systems this may be preferable, so let's give the user the option should they accept the above trade-off. Link: https://lkml.kernel.org/r/20220308141415.3168078-1-elver@google.com Signed-off-by: Marco Elver <elver@google.com> Reviewed-by: Alexander Potapenko <glider@google.com> Cc: Dmitry Vyukov <dvyukov@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
Peng Liu
|
bdd015f7b7 |
kunit: make kunit_test_timeout compatible with comment
In function kunit_test_timeout, it is declared "300 * MSEC_PER_SEC"
represent 5min. However, it is wrong when dealing with arm64 whose
default HZ = 250, or some other situations. Use msecs_to_jiffies to fix
this, and kunit_test_timeout will work as desired.
Link: https://lkml.kernel.org/r/20220309083753.1561921-3-liupeng256@huawei.com
Fixes:
|
||
|
Peng Liu
|
adf5054570 |
kunit: fix UAF when run kfence test case test_gfpzero
Patch series "kunit: fix a UAF bug and do some optimization", v2. This series is to fix UAF (use after free) when running kfence test case test_gfpzero, which is time costly. This UAF bug can be easily triggered by setting CONFIG_KFENCE_NUM_OBJECTS = 65535. Furthermore, some optimization for kunit tests has been done. This patch (of 3): Kunit will create a new thread to run an actual test case, and the main process will wait for the completion of the actual test thread until overtime. The variable "struct kunit test" has local property in function kunit_try_catch_run, and will be used in the test case thread. Task kunit_try_catch_run will free "struct kunit test" when kunit runs overtime, but the actual test case is still run and an UAF bug will be triggered. The above problem has been both observed in a physical machine and qemu platform when running kfence kunit tests. The problem can be triggered when setting CONFIG_KFENCE_NUM_OBJECTS = 65535. Under this setting, the test case test_gfpzero will cost hours and kunit will run to overtime. The follows show the panic log. BUG: unable to handle page fault for address: ffffffff82d882e9 Call Trace: kunit_log_append+0x58/0xd0 ... test_alloc.constprop.0.cold+0x6b/0x8a [kfence_test] test_gfpzero.cold+0x61/0x8ab [kfence_test] kunit_try_run_case+0x4c/0x70 kunit_generic_run_threadfn_adapter+0x11/0x20 kthread+0x166/0x190 ret_from_fork+0x22/0x30 Kernel panic - not syncing: Fatal exception Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Ubuntu-1.8.2-1ubuntu1 04/01/2014 To solve this problem, the test case thread should be stopped when the kunit frame runs overtime. The stop signal will send in function kunit_try_catch_run, and test_gfpzero will handle it. Link: https://lkml.kernel.org/r/20220309083753.1561921-1-liupeng256@huawei.com Link: https://lkml.kernel.org/r/20220309083753.1561921-2-liupeng256@huawei.com Signed-off-by: Peng Liu <liupeng256@huawei.com> Reviewed-by: Marco Elver <elver@google.com> Reviewed-by: Brendan Higgins <brendanhiggins@google.com> Tested-by: Brendan Higgins <brendanhiggins@google.com> Cc: Alexander Potapenko <glider@google.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Wang Kefeng <wangkefeng.wang@huawei.com> Cc: Daniel Latypov <dlatypov@google.com> Cc: David Gow <davidgow@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
Muchun Song
|
9bbdc0f324 |
xarray: use kmem_cache_alloc_lru to allocate xa_node
The workingset will add the xa_node to the shadow_nodes list. So the allocation of xa_node should be done by kmem_cache_alloc_lru(). Using xas_set_lru() to pass the list_lru which we want to insert xa_node into to set up the xa_node reclaim context correctly. Link: https://lkml.kernel.org/r/20220228122126.37293-9-songmuchun@bytedance.com Signed-off-by: Muchun Song <songmuchun@bytedance.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Acked-by: Roman Gushchin <roman.gushchin@linux.dev> Cc: Alex Shi <alexs@kernel.org> Cc: Anna Schumaker <Anna.Schumaker@Netapp.com> Cc: Chao Yu <chao@kernel.org> Cc: Dave Chinner <david@fromorbit.com> Cc: Fam Zheng <fam.zheng@bytedance.com> Cc: Jaegeuk Kim <jaegeuk@kernel.org> Cc: Kari Argillander <kari.argillander@gmail.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Michal Hocko <mhocko@kernel.org> Cc: Qi Zheng <zhengqi.arch@bytedance.com> Cc: Shakeel Butt <shakeelb@google.com> Cc: Theodore Ts'o <tytso@mit.edu> Cc: Trond Myklebust <trond.myklebust@hammerspace.com> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Wei Yang <richard.weiyang@gmail.com> Cc: Xiongchun Duan <duanxiongchun@bytedance.com> Cc: Yang Shi <shy828301@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Linus Torvalds
|
d0858cbdef |
overflow updates for v5.18-rc1
- Convert overflow selftest to KUnit - Convert stackinit selftest to KUnit - Implement size_t saturating arithmetic helpers - Allow struct_size() to be used in initializers -----BEGIN PGP SIGNATURE----- iQJKBAABCgA0FiEEpcP2jyKd1g9yPm4TiXL039xtwCYFAmI4l80WHGtlZXNjb29r QGNocm9taXVtLm9yZwAKCRCJcvTf3G3AJjsSEACqmwsnvyQXI+fKBr/wsqGRGdTx cURccVT/mhQSaAAJMoYjWqOQZVs63dwtoM9leVA9rZuAFNFyiGKrK5r/KhpOijYu AlIOPJzxDnPDu/jHHtAnDgsUeTHPhDnqLPK5j+oz1gPkyHBLyBFvEqDNrlAiTbvV JLkssdcYPEv8QiLBkqX5ossOexxHksvxixmXts1Vc85I/anyuvtbpq/u7HsUrbcO +f/qj7ekB114VgREPJZu5wc2pB+iJMA8jEGqrNLWCOqRIFXJOWLWky/wmATjwXST Pi1kwzII7XZQMrVlMOK0P4YxepLKv5wnJGxZIi6JwJswd0a6oc8NLDTXrtHEq0jq 5Vqq+nPCyW2+OLWF5sNLYzlArI3G6tIPWQSxJcLfcnXLP/tz1+KiW4aa46V16N+D MBQBCK1xei61kWFixn5qGVydOoaTTXgDhMWenxEk55EuU+S9XmiC1Nwvodsl65dv RVGEYfk/7AlRGGTdasn35+6cmrFaCrElGz8+ZfDTaZZbbr6FfWpXRB4xQYwmqwDh YGoyXNQdqlxtGaH5lutmsK5l+q2NlD0u8qRk6pti07hHMAJEyb0i6o3lNsUyw38T gjoglwZUYOUwGOaWk6IOA7Gc3vCycdzP5t2njjBx/54PrCI9tq1oCN9bE6eAtRcA 4BoHC368qhuPttUaWA== =eRcK -----END PGP SIGNATURE----- Merge tag 'overflow-v5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux Pull overflow updates from Kees Cook: "These changes come in roughly two halves: support of Gustavo A. R. Silva's struct_size() work via additional helpers for catching overflow allocation size calculations, and conversions of selftests to KUnit (which includes some tweaks for UML + Clang): - Convert overflow selftest to KUnit - Convert stackinit selftest to KUnit - Implement size_t saturating arithmetic helpers - Allow struct_size() to be used in initializers" * tag 'overflow-v5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: lib: stackinit: Convert to KUnit um: Allow builds with Clang lib: overflow: Convert to Kunit overflow: Provide constant expression struct_size overflow: Implement size_t saturating arithmetic helpers test_overflow: Regularize test reporting output |
||
Ming Lei
|
863a66cdb4 |
lib/sbitmap: allocate sb->map via kvzalloc_node
sbitmap has been used in scsi for replacing atomic operations on sdev->device_busy, so IOPS on some fast scsi storage can be improved. However, sdev->device_busy can be changed in fast path, so we have to allocate the sb->map statically. sdev->device_busy has been capped to 1024, but some drivers may configure the default depth as < 8, then cause each sbitmap word to hold only one bit. Finally 1024 * 128( sizeof(sbitmap_word)) bytes is needed for sb->map, given it is order 5 allocation, sometimes it may fail. Avoid the issue by using kvzalloc_node() for allocating sb->map. Cc: Ewan D. Milne <emilne@redhat.com> Signed-off-by: Ming Lei <ming.lei@redhat.com> Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com> Link: https://lore.kernel.org/r/20220316012708.354668-1-ming.lei@redhat.com Signed-off-by: Jens Axboe <axboe@kernel.dk> |
||
|
Linus Torvalds
|
69d1dea852 |
for-5.18/drivers-2022-03-18
-----BEGIN PGP SIGNATURE-----
iQJEBAABCAAuFiEEwPw5LcreJtl1+l5K99NY+ylx4KYFAmI0/QUQHGF4Ym9lQGtl
cm5lbC5kawAKCRD301j7KXHgpn8GEACRVxJaJV5qjZfoFAQKoAWJEtquwjeARyB+
0V8ROWHDWHSacdug9wBytayiS1lz2zmUHJ6YXyts2dn0v6CrK4s8yGzk5G/RgH6+
6M3GmBKjj+r1DfE8L3OoQWkDR1JFPuFxXTG/uBd7fBY2Excih1Z0D2lpspMleIRf
w8zBrlWrWH8lZlm6HF3fadjEoiWhOM5F4Ofz3eg/PAQrHuD06z8hjQgMeR0jQVzw
bWF9jrdNIplxRjNWIwCTsQRM+z5KQhUGwDODJjIwdQtVaKSt9D99ZbeKTudlslQ2
zrizsCq8P1RjBPcrA45FV6QnT9DIRRGrYzHD63qC6fDae34rbzdSHUwRMP2XSxo8
+hT1AzGypiBauODTPzHFtTskaQ0KibLznEanChh/ThySmNYcEVAljSx3Z5Vo81J+
IqJYK2m3RESCFruy9w3U/P7qiXZmqYldPfjxAKq8ucg6x1PU3XRAVm7SI/i4l75D
Crk1ujj2LJgsyxL6qMrK3XUavl1SJdzWeFSarcCt3m4m11EWWfYzmG8Yn8OE2CEZ
a2CAyDsRi8CZ3hvkaMwigL4wBJjrrig8vyIgok3VrfCmYlNNqMQqM5Rw7vzjR3v1
cKewI3rQjkFXEaveIXyGPTI/0Da4cT0DOfn/Mws9MDUXNPlFMNEDUZkPuzMywiTB
2SWDLTe77g==
=993h
-----END PGP SIGNATURE-----
Merge tag 'for-5.18/drivers-2022-03-18' of git://git.kernel.dk/linux-block
Pull block driver updates from Jens Axboe:
- NVMe updates via Christoph:
- add vectored-io support for user-passthrough (Kanchan Joshi)
- add verbose error logging (Alan Adamson)
- support buffered I/O on block devices in nvmet (Chaitanya
Kulkarni)
- central discovery controller support (Martin Belanger)
- fix and extended the globally unique idenfier validation
(Christoph)
- move away from the deprecated IDA APIs (Sagi Grimberg)
- misc code cleanup (Keith Busch, Max Gurtovoy, Qinghua Jin,
Chaitanya Kulkarni)
- add lockdep annotations for in-kernel sockets (Chris Leech)
- use vmalloc for ANA log buffer (Hannes Reinecke)
- kerneldoc fixes (Chaitanya Kulkarni)
- cleanups (Guoqing Jiang, Chaitanya Kulkarni, Christoph)
- warn about shared namespaces without multipathing (Christoph)
- MD updates via Song with a set of cleanups (Christoph, Mariusz, Paul,
Erik, Dirk)
- loop cleanups and queue depth configuration (Chaitanya)
- null_blk cleanups and fixes (Chaitanya)
- Use descriptive init/exit names in virtio_blk (Randy)
- Use bvec_kmap_local() in drivers (Christoph)
- bcache fixes (Mingzhe)
- xen blk-front persistent grant speedups (Juergen)
- rnbd fix and cleanup (Gioh)
- Misc fixes (Christophe, Colin)
* tag 'for-5.18/drivers-2022-03-18' of git://git.kernel.dk/linux-block: (76 commits)
virtio_blk: eliminate anonymous module_init & module_exit
nvme: warn about shared namespaces without CONFIG_NVME_MULTIPATH
nvme: remove nvme_alloc_request and nvme_alloc_request_qid
nvme: cleanup how disk->disk_name is assigned
nvmet: move the call to nvmet_ns_changed out of nvmet_ns_revalidate
nvmet: use snprintf() with PAGE_SIZE in configfs
nvmet: don't fold lines
nvmet-rdma: fix kernel-doc warning for nvmet_rdma_device_removal
nvmet-fc: fix kernel-doc warning for nvmet_fc_unregister_targetport
nvmet-fc: fix kernel-doc warning for nvmet_fc_register_targetport
nvme-tcp: lockdep: annotate in-kernel sockets
nvme-tcp: don't fold the line
nvme-tcp: don't initialize ret variable
nvme-multipath: call bio_io_error in nvme_ns_head_submit_bio
nvme-multipath: use vmalloc for ANA log buffer
xen/blkfront: speed up purge_persistent_grants()
raid5: initialize the stripe_head embeeded bios as needed
raid5-cache: statically allocate the recovery ra bio
raid5-cache: fully initialize flush_bio when needed
raid5-ppl: fully initialize the bio in ppl_new_iounit
...
|
||
|
Linus Torvalds
|
616355cc81 |
for-5.18/block-2022-03-18
-----BEGIN PGP SIGNATURE----- iQJEBAABCAAuFiEEwPw5LcreJtl1+l5K99NY+ylx4KYFAmI0+GcQHGF4Ym9lQGtl cm5lbC5kawAKCRD301j7KXHgprUpD/9aTJEnj7VCw7UouSsg098sdjtoy9ilslU3 ew47K8CIXHbCB4CDqLnFyvCwAdG1XGgS+fUmFAxvTr29R9SZeS5d+bXL6sZzEo0C bwxsJy9MM2QRtMvB+giAt1myXbwB8cG+ketMBWXqwXXRHRzPbbQfMZia7FqWMnfY KQanH9IwYHp1oa5U/W6Qcjm4oCnLgBMRwqByzUCtiF3y9qgaLkK+3IgkNwjJQjLA DTeUJ/9CgxGQQbzA+LPktbw2xfTqiUfcKq0mWx6Zt4wwNXn1ClqUDUXX6QSM8/5u 3OimbscSkEPPTIYZbVBPkhFnAlQb4JaJEgOrbXvYKVV2Dh+eZY81XwNeE/E8gdBY TnHOTOCjkN/4sR3hIrWazlJzPLdpPA0eOYrhguCraQsX9mcsYNxlJ9otRv/Ve99g uqL0RZg3+NoK84fm79FCGy/ZmPQJvJttlBT9CKVwylv/Lky42xWe7AdM3OipKluY 2nh+zN5Ai7WxZdTKXQFRhCSWfWQ+1qW51tB3dcGW+BooZr/oox47qKQVcHsEWbq1 RNR45F5a4AuPwYUHF/P36WviLnEuq9AvX7OTTyYOplyVQohKIoDXp9chVzLNzBiZ KBR00W6MLKKKN+8foalQWgNyb2i2PH7Ib4xRXvXj/22Vwxg5UmUoBmSDSas9SZUS +dMo7CtNgA== =DpgP -----END PGP SIGNATURE----- Merge tag 'for-5.18/block-2022-03-18' of git://git.kernel.dk/linux-block Pull block updates from Jens Axboe: - BFQ cleanups and fixes (Yu, Zhang, Yahu, Paolo) - blk-rq-qos completion fix (Tejun) - blk-cgroup merge fix (Tejun) - Add offline error return value to distinguish it from an IO error on the device (Song) - IO stats fixes (Zhang, Christoph) - blkcg refcount fixes (Ming, Yu) - Fix for indefinite dispatch loop softlockup (Shin'ichiro) - blk-mq hardware queue management improvements (Ming) - sbitmap dead code removal (Ming, John) - Plugging merge improvements (me) - Show blk-crypto capabilities in sysfs (Eric) - Multiple delayed queue run improvement (David) - Block throttling fixes (Ming) - Start deprecating auto module loading based on dev_t (Christoph) - bio allocation improvements (Christoph, Chaitanya) - Get rid of bio_devname (Christoph) - bio clone improvements (Christoph) - Block plugging improvements (Christoph) - Get rid of genhd.h header (Christoph) - Ensure drivers use appropriate flush helpers (Christoph) - Refcounting improvements (Christoph) - Queue initialization and teardown improvements (Ming, Christoph) - Misc fixes/improvements (Barry, Chaitanya, Colin, Dan, Jiapeng, Lukas, Nian, Yang, Eric, Chengming) * tag 'for-5.18/block-2022-03-18' of git://git.kernel.dk/linux-block: (127 commits) block: cancel all throttled bios in del_gendisk() block: let blkcg_gq grab request queue's refcnt block: avoid use-after-free on throttle data block: limit request dispatch loop duration block/bfq-iosched: Fix spelling mistake "tenative" -> "tentative" sr: simplify the local variable initialization in sr_block_open() block: don't merge across cgroup boundaries if blkcg is enabled block: fix rq-qos breakage from skipping rq_qos_done_bio() block: flush plug based on hardware and software queue order block: ensure plug merging checks the correct queue at least once block: move rq_qos_exit() into disk_release() block: do more work in elevator_exit block: move blk_exit_queue into disk_release block: move q_usage_counter release into blk_queue_release block: don't remove hctx debugfs dir from blk_mq_exit_queue block: move blkcg initialization/destroy into disk allocation/release handler sr: implement ->free_disk to simplify refcounting sd: implement ->free_disk to simplify refcounting sd: delay calling free_opal_dev sd: call sd_zbc_release_disk before releasing the scsi_device reference ... |
||
|
Linus Torvalds
|
93e220a62d |
Merge branch 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto updates from Herbert Xu: "API: - hwrng core now credits for low-quality RNG devices. Algorithms: - Optimisations for neon aes on arm/arm64. - Add accelerated crc32_be on arm64. - Add ffdheXYZ(dh) templates. - Disallow hmac keys < 112 bits in FIPS mode. - Add AVX assembly implementation for sm3 on x86. Drivers: - Add missing local_bh_disable calls for crypto_engine callback. - Ensure BH is disabled in crypto_engine callback path. - Fix zero length DMA mappings in ccree. - Add synchronization between mailbox accesses in octeontx2. - Add Xilinx SHA3 driver. - Add support for the TDES IP available on sama7g5 SoC in atmel" * 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (137 commits) crypto: xilinx - Turn SHA into a tristate and allow COMPILE_TEST MAINTAINERS: update HPRE/SEC2/TRNG driver maintainers list crypto: dh - Remove the unused function dh_safe_prime_dh_alg() hwrng: nomadik - Change clk_disable to clk_disable_unprepare crypto: arm64 - cleanup comments crypto: qat - fix initialization of pfvf rts_map_msg structures crypto: qat - fix initialization of pfvf cap_msg structures crypto: qat - remove unneeded assignment crypto: qat - disable registration of algorithms crypto: hisilicon/qm - fix memset during queues clearing crypto: xilinx: prevent probing on non-xilinx hardware crypto: marvell/octeontx - Use swap() instead of open coding it crypto: ccree - Fix use after free in cc_cipher_exit() crypto: ccp - ccp_dmaengine_unregister release dma channels crypto: octeontx2 - fix missing unlock hwrng: cavium - fix NULL but dereferenced coccicheck error crypto: cavium/nitrox - don't cast parameter in bit operations crypto: vmx - add missing dependencies MAINTAINERS: Add maintainer for Xilinx ZynqMP SHA3 driver crypto: xilinx - Add Xilinx SHA3 driver ... |
||
|
Linus Torvalds
|
5628b8de12 |
Random number generator changes for Linux 5.18-rc1.
-----BEGIN PGP SIGNATURE-----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=cyDR
-----END PGP SIGNATURE-----
Merge tag 'random-5.18-rc1-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/crng/random
Pull random number generator updates from Jason Donenfeld:
"There have been a few important changes to the RNG's crypto, but the
intent for 5.18 has been to shore up the existing design as much as
possible with modern cryptographic functions and proven constructions,
rather than actually changing up anything fundamental to the RNG's
design.
So it's still the same old RNG at its core as before: it still counts
entropy bits, and collects from the various sources with the same
heuristics as before, and so forth. However, the cryptographic
algorithms that transform that entropic data into safe random numbers
have been modernized.
Just as important, if not more, is that the code has been cleaned up
and re-documented. As one of the first drivers in Linux, going back to
1.3.30, its general style and organization was showing its age and
becoming both a maintenance burden and an auditability impediment.
Hopefully this provides a more solid foundation to build on for the
future. I encourage you to open up the file in full, and maybe you'll
remark, "oh, that's what it's doing," and enjoy reading it. That, at
least, is the eventual goal, which this pull begins working toward.
Here's a summary of the various patches in this pull:
- /dev/urandom and /dev/random now do the same thing, per the patch
we discussed on the list. I think this is worth trying out. If it
does appear problematic, I've made sure to keep it standalone and
revertible without any conflicts.
- Fixes and cleanups for numerous integer type problems, locking
issues, and general code quality concerns.
- The input pool's LFSR has been replaced with a cryptographically
secure hash function, which has security and performance benefits
alike, and consequently allows us to count entropy bits linearly.
- The pre-init injection now uses a real hash function too, instead
of an LFSR or vanilla xor.
- The interrupt handler's fast_mix() function now uses one round of
SipHash, rather than the fake crypto that was there before.
- All additions of RDRAND and RDSEED now go through the input pool's
hash function, in part to mitigate ridiculous hypothetical CPU
backdoors, but more so to have a consistent interface for ingesting
entropy that's easy to analyze, making everything happen one way,
instead of a potpourri of different ways.
- The crng now works on per-cpu data, while also being in accordance
with the actual "fast key erasure RNG" design. This allows us to
fix several boot-time race complications associated with the prior
dynamically allocated model, eliminates much locking, and makes our
backtrack protection more robust.
- Batched entropy now erases doled out values so that it's backtrack
resistant.
- Working closely with Sebastian, the interrupt handler no longer
needs to take any locks at all, as we punt the
synchronized/expensive operations to a workqueue. This is
especially nice for PREEMPT_RT, where taking spinlocks in irq
context is problematic. It also makes the handler faster for the
rest of us.
- Also working with Sebastian, we now do the right thing on CPU
hotplug, so that we don't use stale entropy or fail to accumulate
new entropy when CPUs come back online.
- We handle virtual machines that fork / clone / snapshot, using the
"vmgenid" ACPI specification for retrieving a unique new RNG seed,
which we can use to also make WireGuard (and in the future, other
things) safe across VM forks.
- Around boot time, we now try to reseed more often if enough entropy
is available, before settling on the usual 5 minute schedule.
- Last, but certainly not least, the documentation in the file has
been updated considerably"
* tag 'random-5.18-rc1-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/crng/random: (60 commits)
random: check for signal and try earlier when generating entropy
random: reseed more often immediately after booting
random: make consistent usage of crng_ready()
random: use SipHash as interrupt entropy accumulator
wireguard: device: clear keys on VM fork
random: provide notifier for VM fork
random: replace custom notifier chain with standard one
random: do not export add_vmfork_randomness() unless needed
virt: vmgenid: notify RNG of VM fork and supply generation ID
ACPI: allow longer device IDs
random: add mechanism for VM forks to reinitialize crng
random: don't let 644 read-only sysctls be written to
random: give sysctl_random_min_urandom_seed a more sensible value
random: block in /dev/urandom
random: do crng pre-init loading in worker rather than irq
random: unify cycles_t and jiffies usage and types
random: cleanup UUID handling
random: only wake up writers after zap if threshold was passed
random: round-robin registers as ulong, not u32
random: clear fast pool, crng, and batches in cpuhp bring up
...
|
||
|
Kees Cook
|
02788ebcf5 |
lib: stackinit: Convert to KUnit
Convert stackinit unit tests to KUnit, for better integration
into the kernel self test framework. Includes a rename of
test_stackinit.c to stackinit_kunit.c, and CONFIG_TEST_STACKINIT to
CONFIG_STACKINIT_KUNIT_TEST.
Adjust expected test results based on which stack initialization method
was chosen:
$ CMD="./tools/testing/kunit/kunit.py run stackinit --raw_output \
--arch=x86_64 --kconfig_add"
$ $CMD | grep stackinit:
# stackinit: pass:36 fail:0 skip:29 total:65
$ $CMD CONFIG_GCC_PLUGIN_STRUCTLEAK_USER=y | grep stackinit:
# stackinit: pass:37 fail:0 skip:28 total:65
$ $CMD CONFIG_GCC_PLUGIN_STRUCTLEAK_BYREF=y | grep stackinit:
# stackinit: pass:55 fail:0 skip:10 total:65
$ $CMD CONFIG_GCC_PLUGIN_STRUCTLEAK_BYREF_ALL=y | grep stackinit:
# stackinit: pass:62 fail:0 skip:3 total:65
$ $CMD CONFIG_INIT_STACK_ALL_PATTERN=y --make_option LLVM=1 | grep stackinit:
# stackinit: pass:60 fail:0 skip:5 total:65
$ $CMD CONFIG_INIT_STACK_ALL_ZERO=y --make_option LLVM=1 | grep stackinit:
# stackinit: pass:60 fail:0 skip:5 total:65
Temporarily remove the userspace-build mode, which will be restored in a
later patch.
Expand the size of the pre-case switch variable so it doesn't get
accidentally cleared.
Cc: David Gow <davidgow@google.com>
Cc: Daniel Latypov <dlatypov@google.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Kees Cook <keescook@chromium.org>
---
v1: https://lore.kernel.org/lkml/20220224055145.1853657-1-keescook@chromium.org
v2:
- split "userspace KUnit stub" into separate header and patch (Daniel)
- Improve commit log and comments (David)
- Provide mapping of expected XFAIL tests to CONFIGs (David)
|
||
Petr Mladek
|
0834c6f03b | Merge branch 'for-5.18-vsprintf-fourcc-fixup' into for-linus | ||
Jiri Olsa
|
a0019cd7d4 |
lib/sort: Add priv pointer to swap function
Adding support to have priv pointer in swap callback function.
Following the initial change on cmp callback functions [1]
and adding SWAP_WRAPPER macro to identify sort call of sort_r.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Reviewed-by: Masami Hiramatsu <mhiramat@kernel.org>
Link: https://lore.kernel.org/bpf/20220316122419.933957-2-jolsa@kernel.org
[1]
|
||
|
Masami Hiramatsu
|
f4616fabab |
fprobe: Add a selftest for fprobe
Add a KUnit based selftest for fprobe interface. Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org> Tested-by: Steven Rostedt (Google) <rostedt@goodmis.org> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/164735295554.1084943.18347620679928750960.stgit@devnote2 |
||
|
Jason A. Donenfeld
|
5acd35487d |
random: replace custom notifier chain with standard one
We previously rolled our own randomness readiness notifier, which only has two users in the whole kernel. Replace this with a more standard atomic notifier block that serves the same purpose with less code. Also unexport the symbols, because no modules use it, only unconditional builtins. The only drawback is that it's possible for a notification handler returning the "stop" code to prevent further processing, but given that there are only two users, and that we're unexporting this anyway, that doesn't seem like a significant drawback for the simplification we receive here. Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Theodore Ts'o <tytso@mit.edu> Reviewed-by: Dominik Brodowski <linux@dominikbrodowski.net> Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> |
||
Johannes Berg
|
2a6852cb8f |
lib/logic_iomem: correct fallback config references
Due to some renaming, we ended up with the "indirect iomem"
naming in Kconfig, following INDIRECT_PIO. However, clearly
I missed following through on that in the ifdefs, but so far
INDIRECT_IOMEM_FALLBACK isn't used by any architecture.
Reported-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Fixes:
|
||
Paul Menzel
|
5b401e4e9a |
lib/raid6: Include <asm/ppc-opcode.h> for VPERMXOR
On Ubuntu 21.10 (ppc64le) building raid6test with gcc (Ubuntu
11.2.0-7ubuntu2) 11.2.0 fails with the error below.
gcc -I.. -I ../../../include -g -O2 \
-I../../../arch/powerpc/include -DCONFIG_ALTIVEC \
-c -o vpermxor1.o vpermxor1.c
vpermxor1.c: In function ‘raid6_vpermxor1_gen_syndrome_real’:
vpermxor1.c:64:29: error: expected string literal before ‘VPERMXOR’
64 | asm(VPERMXOR(%0,%1,%2,%3):"=v"(wq0):"v"(gf_high), "v"(gf_low), "v"(wq0));
| ^~~~~~~~
make: *** [Makefile:58: vpermxor1.o] Error 1
So, include the header asm/ppc-opcode.h defining this macro also when
not building the Linux kernel but only this too.
Cc: Matt Brown <matthew.brown.dev@gmail.com>
Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de>
Signed-off-by: Song Liu <song@kernel.org>
|
||
|
Paul Menzel
|
633174a704 |
lib/raid6/test/Makefile: Use $(pound) instead of \# for Make 4.3
Buidling raid6test on Ubuntu 21.10 (ppc64le) with GNU Make 4.3 shows the
errors below:
$ cd lib/raid6/test/
$ make
<stdin>:1:1: error: stray ‘\’ in program
<stdin>:1:2: error: stray ‘#’ in program
<stdin>:1:11: error: expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’ \
before ‘<’ token
[...]
The errors come from the HAS_ALTIVEC test, which fails, and the POWER
optimized versions are not built. That’s also reason nobody noticed on the
other architectures.
GNU Make 4.3 does not remove the backslash anymore. From the 4.3 release
announcment:
> * WARNING: Backward-incompatibility!
> Number signs (#) appearing inside a macro reference or function invocation
> no longer introduce comments and should not be escaped with backslashes:
> thus a call such as:
> foo := $(shell echo '#')
> is legal. Previously the number sign needed to be escaped, for example:
> foo := $(shell echo '\#')
> Now this latter will resolve to "\#". If you want to write makefiles
> portable to both versions, assign the number sign to a variable:
> H := \#
> foo := $(shell echo '$H')
> This was claimed to be fixed in 3.81, but wasn't, for some reason.
> To detect this change search for 'nocomment' in the .FEATURES variable.
So, do the same as commit
|
||
Dirk Müller
|
a5359ddd05 |
lib/raid6/test: fix multiple definition linking error
GCC 10+ defaults to -fno-common, which enforces proper declaration of external references using "extern". without this change a link would fail with: lib/raid6/test/algos.c:28: multiple definition of `raid6_call'; lib/raid6/test/test.c:22: first defined here the pq.h header that is included already includes an extern declaration so we can just remove the redundant one here. Cc: <stable@vger.kernel.org> Signed-off-by: Dirk Müller <dmueller@suse.de> Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de> Signed-off-by: Song Liu <song@kernel.org> |
||
Keith Busch
|
f3813f4b28 |
crypto: add rocksoft 64b crc guard tag framework
Hardware specific features may be able to calculate a crc64, so provide a framework for drivers to register their implementation. If nothing is registered, fallback to the generic table lookup implementation. The implementation is modeled after the crct10dif equivalent. Signed-off-by: Keith Busch <kbusch@kernel.org> Link: https://lore.kernel.org/r/20220303201312.3255347-7-kbusch@kernel.org Signed-off-by: Jens Axboe <axboe@kernel.dk> |
||
|
Keith Busch
|
cbc0a40e17 |
lib: add rocksoft model crc64
The NVM Express specification extended data integrity fields to 64 bits
using the Rocksoft parameters. Add the poly to the crc64 table
generation, and provide a generic library routine implementing the
algorithm.
The Rocksoft 64-bit CRC model parameters are as follows:
Poly: 0xAD93D23594C93659
Initial value: 0xFFFFFFFFFFFFFFFF
Reflected Input: True
Reflected Output: True
Xor Final: 0xFFFFFFFFFFFFFFFF
Since this model used reflected bits, the implementation generates the
reflected table so the result is ordered consistently.
Cc: Christoph Hellwig <hch@lst.de>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Link: https://lore.kernel.org/r/20220303201312.3255347-6-kbusch@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
||
Jens Axboe
|
bc8419944f |
Merge branch 'for-5.18/block' into for-5.18/64bit-pi
* for-5.18/block: (96 commits) block: remove bio_devname ext4: stop using bio_devname raid5-ppl: stop using bio_devname raid1: stop using bio_devname md-multipath: stop using bio_devname dm-integrity: stop using bio_devname dm-crypt: stop using bio_devname pktcdvd: remove a pointless debug check in pkt_submit_bio block: remove handle_bad_sector block: fix and cleanup bio_check_ro bfq: fix use-after-free in bfq_dispatch_request blk-crypto: show crypto capabilities in sysfs block: don't delete queue kobject before its children block: simplify calling convention of elv_unregister_queue() block: remove redundant semicolon block: default BLOCK_LEGACY_AUTOLOAD to y block: update io_ticks when io hang block, bfq: don't move oom_bfqq block, bfq: avoid moving bfqq to it's parent bfqg block, bfq: cleanup bfq_bfqq_to_bfqg() ... |
||
|
Jakub Kicinski
|
6646dc241d |
Merge https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Daniel Borkmann says:
====================
pull-request: bpf-next 2022-03-04
We've added 32 non-merge commits during the last 14 day(s) which contain
a total of 59 files changed, 1038 insertions(+), 473 deletions(-).
The main changes are:
1) Optimize BPF stackmap's build_id retrieval by caching last valid build_id,
as consecutive stack frames are likely to be in the same VMA and therefore
have the same build id, from Hao Luo.
2) Several improvements to arm64 BPF JIT, that is, support for JITing
the atomic[64]_fetch_add, atomic[64]_[fetch_]{and,or,xor} and lastly
atomic[64]_{xchg|cmpxchg}. Also fix the BTF line info dump for JITed
programs, from Hou Tao.
3) Optimize generic BPF map batch deletion by only enforcing synchronize_rcu()
barrier once upon return to user space, from Eric Dumazet.
4) For kernel build parse DWARF and generate BTF through pahole with enabled
multithreading, from Kui-Feng Lee.
5) BPF verifier usability improvements by making log info more concise and
replacing inv with scalar type name, from Mykola Lysenko.
6) Two follow-up fixes for BPF prog JIT pack allocator, from Song Liu.
7) Add a new Kconfig to allow for loading kernel modules with non-matching
BTF type info; their BTF info is then removed on load, from Connor O'Brien.
8) Remove reallocarray() usage from bpftool and switch to libbpf_reallocarray()
in order to fix compilation errors for older glibc, from Mauricio Vásquez.
9) Fix libbpf to error on conflicting name in BTF when type declaration
appears before the definition, from Xu Kuohai.
10) Fix issue in BPF preload for in-kernel light skeleton where loaded BPF
program fds prevent init process from setting up fd 0-2, from Yucong Sun.
11) Fix libbpf reuse of pinned perf RB map when max_entries is auto-determined
by libbpf, from Stijn Tintel.
12) Several cleanups for libbpf and a fix to enforce perf RB map #pages to be
non-zero, from Yuntao Wang.
* https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (32 commits)
bpf: Small BPF verifier log improvements
libbpf: Add a check to ensure that page_cnt is non-zero
bpf, x86: Set header->size properly before freeing it
x86: Disable HAVE_ARCH_HUGE_VMALLOC on 32-bit x86
bpf, test_run: Fix overflow in XDP frags bpf_test_finish
selftests/bpf: Update btf_dump case for conflicting names
libbpf: Skip forward declaration when counting duplicated type names
bpf: Add some description about BPF_JIT_ALWAYS_ON in Kconfig
bpf, docs: Add a missing colon in verifier.rst
bpf: Cache the last valid build_id
libbpf: Fix BPF_MAP_TYPE_PERF_EVENT_ARRAY auto-pinning
bpf, selftests: Use raw_tp program for atomic test
bpf, arm64: Support more atomic operations
bpftool: Remove redundant slashes
bpf: Add config to allow loading modules with BTF mismatches
bpf, arm64: Feed byte-offset into bpf line info
bpf, arm64: Call build_prologue() first in first JIT pass
bpf: Fix issue with bpf preload module taking over stdout/stdin of kernel.
bpftool: Bpf skeletons assert type sizes
bpf: Cleanup comments
...
====================
Link: https://lore.kernel.org/r/20220304164313.31675-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
||
|
Jakub Kicinski
|
80901bff81 |
Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
net/batman-adv/hard-interface.c commit |
||
Christoph Hellwig
|
27674ef6c7 |
mm: remove the extra ZONE_DEVICE struct page refcount
ZONE_DEVICE struct pages have an extra reference count that complicates the code for put_page() and several places in the kernel that need to check the reference count to see that a page is not being used (gup, compaction, migration, etc.). Clean up the code so the reference count doesn't need to be treated specially for ZONE_DEVICE pages. Note that this excludes the special idle page wakeup for fsdax pages, which still happens at refcount 1. This is a separate issue and will be sorted out later. Given that only fsdax pages require the notifiacation when the refcount hits 1 now, the PAGEMAP_OPS Kconfig symbol can go away and be replaced with a FS_DAX check for this hook in the put_page fastpath. Based on an earlier patch from Ralph Campbell <rcampbell@nvidia.com>. Link: https://lkml.kernel.org/r/20220210072828.2930359-8-hch@lst.de Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Logan Gunthorpe <logang@deltatee.com> Reviewed-by: Ralph Campbell <rcampbell@nvidia.com> Reviewed-by: Jason Gunthorpe <jgg@nvidia.com> Reviewed-by: Dan Williams <dan.j.williams@intel.com> Acked-by: Felix Kuehling <Felix.Kuehling@amd.com> Tested-by: "Sierra Guiza, Alejandro (Alex)" <alex.sierra@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: Alistair Popple <apopple@nvidia.com> Cc: Ben Skeggs <bskeggs@redhat.com> Cc: Chaitanya Kulkarni <kch@nvidia.com> Cc: Christian Knig <christian.koenig@amd.com> Cc: Karol Herbst <kherbst@redhat.com> Cc: Lyude Paul <lyude@redhat.com> Cc: Miaohe Lin <linmiaohe@huawei.com> Cc: Muchun Song <songmuchun@bytedance.com> Cc: "Pan, Xinhui" <Xinhui.Pan@amd.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> |
||
|
Christoph Hellwig
|
dc90f0846d |
mm: don't include <linux/memremap.h> in <linux/mm.h>
Move the check for the actual pgmap types that need the free at refcount one behavior into the out of line helper, and thus avoid the need to pull memremap.h into mm.h. Link: https://lkml.kernel.org/r/20220210072828.2930359-7-hch@lst.de Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Logan Gunthorpe <logang@deltatee.com> Reviewed-by: Jason Gunthorpe <jgg@nvidia.com> Reviewed-by: Dan Williams <dan.j.williams@intel.com> Acked-by: Felix Kuehling <Felix.Kuehling@amd.com> Tested-by: "Sierra Guiza, Alejandro (Alex)" <alex.sierra@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: Alistair Popple <apopple@nvidia.com> Cc: Ben Skeggs <bskeggs@redhat.com> Cc: Chaitanya Kulkarni <kch@nvidia.com> Cc: Karol Herbst <kherbst@redhat.com> Cc: Lyude Paul <lyude@redhat.com> Cc: Miaohe Lin <linmiaohe@huawei.com> Cc: Muchun Song <songmuchun@bytedance.com> Cc: "Pan, Xinhui" <Xinhui.Pan@amd.com> Cc: Ralph Campbell <rcampbell@nvidia.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> |
||
|
Christoph Hellwig
|
730ff52194 |
mm: remove pointless includes from <linux/hmm.h>
hmm.h pulls in the world for no good reason at all. Remove the includes and push a few ones into the users instead. Link: https://lkml.kernel.org/r/20220210072828.2930359-4-hch@lst.de Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Logan Gunthorpe <logang@deltatee.com> Reviewed-by: Jason Gunthorpe <jgg@nvidia.com> Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com> Reviewed-by: Muchun Song <songmuchun@bytedance.com> Tested-by: "Sierra Guiza, Alejandro (Alex)" <alex.sierra@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: Alistair Popple <apopple@nvidia.com> Cc: Ben Skeggs <bskeggs@redhat.com> Cc: Christian Knig <christian.koenig@amd.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Felix Kuehling <Felix.Kuehling@amd.com> Cc: Karol Herbst <kherbst@redhat.com> Cc: Lyude Paul <lyude@redhat.com> Cc: Miaohe Lin <linmiaohe@huawei.com> Cc: "Pan, Xinhui" <Xinhui.Pan@amd.com> Cc: Ralph Campbell <rcampbell@nvidia.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> |
||
|
Linus Torvalds
|
7e3d76139b |
ARM further fixes for 5.17-rc:
- Fix kgdb breakpoint for Thumb2 - Fix dependency for BITREVERSE kconfig - Fix nommu early_params and __setup returns -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEuNNh8scc2k/wOAE+9OeQG+StrGQFAmIc4SIACgkQ9OeQG+St rGTlCQ//XQD4xLnvM2LScGFVOOvoQwOmv77H6jOVrfO1xs8dD0W5mBG3LdgaAKkW CnYRb9qF2i+lq1p3ZH9u+5bSX6ttzlRmvwUQB89YM7gkU5AY535gz1nFKScdT932 FNftd1h4FJXvdOsVQM3MnwTNFtp3YodkkkNzKS8PkMxSuvQffMXBMo8cTpkkIF+M Eq/QRGIavreFqsI7UtN24j1FkDlBGYrVT8aGHwfyYRCIiFw6InaCpZ1eElJl0xdH v80h1ihYqIfLgkHH3Bkk8edsNoosJII5B67n1t1ZdkNBKEiPR5tLa5IMmEv2Dy07 ufUvU1dullN5KXLQzD/8H4BZMGR1m0tDKWqCt1x1wcug/a1R0xPuO5QEOKXU0HpW wegV8ueYmGqAN5HN1iRpNctCJSos+qPZYuDDevJMnXjQsDRamUqUy/0V/rgc7qKE yzBfzgKM+Vhn5bKhtXu09Z6xAwVa0wknsJ+NF++EbukAW/WK5m3ck1Z0Ab6e3C1i phlnCIH083yejpxuoQMxDaGDhWwEE+a9R63BUPUxmdBIxrVc2yZLo+BUDJxaDh8n GcsiFnrsziwJIRlL0FsEWh1PbwWd8xhfHCBV7qbRDZ98RfDyjrajJrl9eK9u9pT+ nUZKTC6Y+v6N3qfGJzvTHgjhOAA+crfgHcgDGZthoz3UJ0A1Tk0= =cSgl -----END PGP SIGNATURE----- Merge tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm Pull ARM fixes from Russell King: - Fix kgdb breakpoint for Thumb2 - Fix dependency for BITREVERSE kconfig - Fix nommu early_params and __setup returns * tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm: ARM: 9182/1: mmu: fix returns from early_param() and __setup() functions ARM: 9178/1: fix unmet dependency on BITREVERSE for HAVE_ARCH_BITREVERSE ARM: Fix kgdb breakpoint for Thumb2 |
||
Nicolai Stange
|
81771ff241 |
lib/mpi: export mpi_rshift
A subsequent patch will make the crypto/dh's dh_is_pubkey_valid() to calculate a safe-prime groups Q parameter from P: Q = (P - 1) / 2. For implementing this, mpi_rshift() will be needed. Export it so that it's accessible from crypto/dh. Signed-off-by: Nicolai Stange <nstange@suse.de> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> |
||
Connor O'Brien
|
5e214f2e43 |
bpf: Add config to allow loading modules with BTF mismatches
BTF mismatch can occur for a separately-built module even when the ABI is otherwise compatible and nothing else would prevent successfully loading. Add a new Kconfig to control how mismatches are handled. By default, preserve the current behavior of refusing to load the module. If MODULE_ALLOW_BTF_MISMATCH is enabled, load the module but ignore its BTF information. Suggested-by: Yonghong Song <yhs@fb.com> Suggested-by: Michal Suchánek <msuchanek@suse.de> Signed-off-by: Connor O'Brien <connoro@google.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Shung-Hsi Yu <shung-hsi.yu@suse.com> Acked-by: Song Liu <songliubraving@fb.com> Link: https://lore.kernel.org/bpf/CAADnVQJ+OVPnBz8z3vNu8gKXX42jCUqfuvhWAyCQDu8N_yqqwQ@mail.gmail.com Link: https://lore.kernel.org/bpf/20220223012814.1898677-1-connoro@google.com |
||
|
Kees Cook
|
617f55e207 |
lib: overflow: Convert to Kunit
Convert overflow unit tests to KUnit, for better integration into the kernel self test framework. Includes a rename of test_overflow.c to overflow_kunit.c, and CONFIG_TEST_OVERFLOW to CONFIG_OVERFLOW_KUNIT_TEST. $ ./tools/testing/kunit/kunit.py run overflow ... [14:33:51] Starting KUnit Kernel (1/1)... [14:33:51] ============================================================ [14:33:51] ================== overflow (11 subtests) ================== [14:33:51] [PASSED] u8_overflow_test [14:33:51] [PASSED] s8_overflow_test [14:33:51] [PASSED] u16_overflow_test [14:33:51] [PASSED] s16_overflow_test [14:33:51] [PASSED] u32_overflow_test [14:33:51] [PASSED] s32_overflow_test [14:33:51] [PASSED] u64_overflow_test [14:33:51] [PASSED] s64_overflow_test [14:33:51] [PASSED] overflow_shift_test [14:33:51] [PASSED] overflow_allocation_test [14:33:51] [PASSED] overflow_size_helpers_test [14:33:51] ==================== [PASSED] overflow ===================== [14:33:51] ============================================================ [14:33:51] Testing complete. Passed: 11, Failed: 0, Crashed: 0, Skipped: 0, Errors: 0 [14:33:51] Elapsed time: 12.525s total, 0.001s configuring, 12.402s building, 0.101s running Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk> Cc: Nick Desaulniers <ndesaulniers@google.com> Co-developed-by: Vitor Massaru Iha <vitor@massaru.org> Signed-off-by: Vitor Massaru Iha <vitor@massaru.org> Link: https://lore.kernel.org/lkml/20200720224418.200495-1-vitor@massaru.org/ Co-developed-by: Daniel Latypov <dlatypov@google.com> Signed-off-by: Daniel Latypov <dlatypov@google.com> Link: https://lore.kernel.org/linux-kselftest/20210503211536.1384578-1-dlatypov@google.com/ Acked-by: Nick Desaulniers <ndesaulniers@google.com> Link: https://lore.kernel.org/lkml/CAKwvOdm62iA1dNiC6Q11UJ-MnTqtc4kXkm-ubPaFMK824_k0nw@mail.gmail.com Signed-off-by: Kees Cook <keescook@chromium.org> Reviewed-by: David Gow <davidgow@google.com> Link: https://lore.kernel.org/lkml/CABVgOS=TWVh649_Vjo3wnMu9gZnq66gkV-LtGgsksAWMqc+MSA@mail.gmail.com |
||
|
Andrey Konovalov
|
70effdc375 |
kasan: test: prevent cache merging in kmem_cache_double_destroy
With HW_TAGS KASAN and kasan.stacktrace=off, the cache created in the
kmem_cache_double_destroy() test might get merged with an existing one.
Thus, the first kmem_cache_destroy() call won't actually destroy it but
will only decrease the refcount. This causes the test to fail.
Provide an empty constructor for the created cache to prevent the cache
from getting merged.
Link: https://lkml.kernel.org/r/b597bd434c49591d8af00ee3993a42c609dc9a59.1644346040.git.andreyknvl@google.com
Fixes:
|
||
|
David Gow
|
5debe5bfa0 |
list: test: Add a test for list_entry_is_head()
The list_entry_is_head() macro was added[1] after the list KUnit tests, so wasn't tested. Add a new KUnit test to complete the set. [1]: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=e130816164e244b692921de49771eeb28205152d Signed-off-by: David Gow <davidgow@google.com> Acked-by: Daniel Latypov <dlatypov@google.com> Acked-by: Brendan Higgins <brendanhiggins@google.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org> |
||
|
David Gow
|
37dc573c0a |
list: test: Add a test for list_is_head()
list_is_head() was added recently[1], and didn't have a KUnit test. The implementation is trivial, so it's not a particularly exciting test, but it'd be nice to get back to full coverage of the list functions. [1]: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/include/linux/list.h?id=0425473037db40d9e322631f2d4dc6ef51f97e88 Signed-off-by: David Gow <davidgow@google.com> Acked-by: Daniel Latypov <dlatypov@google.com> Acked-by: Brendan Higgins <brendanhiggins@google.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org> |
||
|
David Gow
|
d7fd696c12 |
list: test: Add test for list_del_init_careful()
The list_del_init_careful() function was added[1] after the list KUnit test. Add a very basic test to cover it. Note that this test only covers the single-threaded behaviour (which matches list_del_init()), as is already the case with the test for list_empty_careful(). [1]: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=c6fe44d96fc1536af5b11cd859686453d1b7bfd1 Signed-off-by: David Gow <davidgow@google.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org> |
||
Arnd Bergmann
|
967747bbc0 |
uaccess: remove CONFIG_SET_FS
There are no remaining callers of set_fs(), so CONFIG_SET_FS can be removed globally, along with the thread_info field and any references to it. This turns access_ok() into a cheaper check against TASK_SIZE_MAX. As CONFIG_SET_FS is now gone, drop all remaining references to set_fs()/get_fs(), mm_segment_t, user_addr_max() and uaccess_kernel(). Acked-by: Sam Ravnborg <sam@ravnborg.org> # for sparc32 changes Acked-by: "Eric W. Biederman" <ebiederm@xmission.com> Tested-by: Sergey Matyukevich <sergey.matyukevich@synopsys.com> # for arc changes Acked-by: Stafford Horne <shorne@gmail.com> # [openrisc, asm-generic] Acked-by: Dinh Nguyen <dinguyen@kernel.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de> |
||
|
Arnd Bergmann
|
5a06fcb15b |
lib/test_lockup: fix kernel pointer check for separate address spaces
test_kernel_ptr() uses access_ok() to figure out if a given address points to user space instead of kernel space. However on architectures that set CONFIG_ALTERNATE_USER_ADDRESS_SPACE, a pointer can be valid for both, and the check always fails because access_ok() returns true. Make the check for user space pointers conditional on the type of address space layout. Signed-off-by: Arnd Bergmann <arnd@arndb.de> |
||
|
Arnd Bergmann
|
23fc539e81 |
uaccess: fix type mismatch warnings from access_ok()
On some architectures, access_ok() does not do any argument type checking, so replacing the definition with a generic one causes a few warnings for harmless issues that were never caught before. Fix the ones that I found either through my own test builds or that were reported by the 0-day bot. Reported-by: kernel test robot <lkp@intel.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Acked-by: Dinh Nguyen <dinguyen@kernel.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de> |
||
|
Jakub Kicinski
|
aaa25a2fa7 |
Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
tools/testing/selftests/net/mptcp/mptcp_join.sh |
||
Christophe Leroy
|
8484291132 |
vsprintf: Fix %pK with kptr_restrict == 0
Although kptr_restrict is set to 0 and the kernel is booted with
no_hash_pointers parameter, the content of /proc/vmallocinfo is
lacking the real addresses.
/ # cat /proc/vmallocinfo
0x(ptrval)-0x(ptrval) 8192 load_module+0xc0c/0x2c0c pages=1 vmalloc
0x(ptrval)-0x(ptrval) 12288 start_kernel+0x4e0/0x690 pages=2 vmalloc
0x(ptrval)-0x(ptrval) 12288 start_kernel+0x4e0/0x690 pages=2 vmalloc
0x(ptrval)-0x(ptrval) 8192 _mpic_map_mmio.constprop.0+0x20/0x44 phys=0x80041000 ioremap
0x(ptrval)-0x(ptrval) 12288 _mpic_map_mmio.constprop.0+0x20/0x44 phys=0x80041000 ioremap
...
According to the documentation for /proc/sys/kernel/, %pK is
equivalent to %p when kptr_restrict is set to 0.
Fixes:
|
||
|
Linus Torvalds
|
917bbdb107 |
Merge branch 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull ITER_PIPE fix from Al Viro: "Fix for old sloppiness in pipe_buffer reuse" * 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: lib/iov_iter: initialize "flags" in new pipe_buffer |
||
|
Jason A. Donenfeld
|
14c174633f |
random: remove unused tracepoints
These explicit tracepoints aren't really used and show sign of aging. It's work to keep these up to date, and before I attempted to keep them up to date, they weren't up to date, which indicates that they're not really used. These days there are better ways of introspecting anyway. Cc: Theodore Ts'o <tytso@mit.edu> Reviewed-by: Dominik Brodowski <linux@dominikbrodowski.net> Reviewed-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> |
||
Max Kellermann
|
9d2231c5d7 |
lib/iov_iter: initialize "flags" in new pipe_buffer
The functions copy_page_to_iter_pipe() and push_pipe() can both
allocate a new pipe_buffer, but the "flags" member initializer is
missing.
Fixes:
|
||
Julian Braha
|
11c57c3ba9 |
ARM: 9178/1: fix unmet dependency on BITREVERSE for HAVE_ARCH_BITREVERSE
Resending this to properly add it to the patch tracker - thanks for letting me know, Arnd :) When ARM is enabled, and BITREVERSE is disabled, Kbuild gives the following warning: WARNING: unmet direct dependencies detected for HAVE_ARCH_BITREVERSE Depends on [n]: BITREVERSE [=n] Selected by [y]: - ARM [=y] && (CPU_32v7M [=n] || CPU_32v7 [=y]) && !CPU_32v6 [=n] This is because ARM selects HAVE_ARCH_BITREVERSE without selecting BITREVERSE, despite HAVE_ARCH_BITREVERSE depending on BITREVERSE. This unmet dependency bug was found by Kismet, a static analysis tool for Kconfig. Please advise if this is not the appropriate solution. Signed-off-by: Julian Braha <julianbraha@gmail.com> Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> |
||
|
Kees Cook
|
230f6fa2c1 |
overflow: Provide constant expression struct_size
There have been cases where struct_size() (or flex_array_size()) needs to be calculated for an initializer, which requires it be a constant expression. This is possible when the "count" argument is a constant expression, so provide this ability for the helpers. Cc: Gustavo A. R. Silva <gustavoars@kernel.org> Cc: Nathan Chancellor <nathan@kernel.org> Cc: Nick Desaulniers <ndesaulniers@google.com> Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk> Signed-off-by: Kees Cook <keescook@chromium.org> Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org> Tested-by: Gustavo A. R. Silva <gustavoars@kernel.org> Link: https://lore.kernel.org/lkml/20220210010407.GA701603@embeddedor |
||
|
Kees Cook
|
e1be43d9b5 |
overflow: Implement size_t saturating arithmetic helpers
In order to perform more open-coded replacements of common allocation
size arithmetic, the kernel needs saturating (SIZE_MAX) helpers for
multiplication, addition, and subtraction. For example, it is common in
allocators, especially on realloc, to add to an existing size:
p = krealloc(map->patch,
sizeof(struct reg_sequence) * (map->patch_regs + num_regs),
GFP_KERNEL);
There is no existing saturating replacement for this calculation, and
just leaving the addition open coded inside array_size() could
potentially overflow as well. For example, an overflow in an expression
for a size_t argument might wrap to zero:
array_size(anything, something_at_size_max + 1) == 0
Introduce size_mul(), size_add(), and size_sub() helpers that
implicitly promote arguments to size_t and saturated calculations for
use in allocations. With these helpers it is also possible to redefine
array_size(), array3_size(), flex_array_size(), and struct_size() in
terms of the new helpers.
As with the check_*_overflow() helpers, the new helpers use __must_check,
though what is really desired is a way to make sure that assignment is
only to a size_t lvalue. Without this, it's still possible to introduce
overflow/underflow via type conversion (i.e. from size_t to int).
Enforcing this will currently need to be left to static analysis or
future use of -Wconversion.
Additionally update the overflow unit tests to force runtime evaluation
for the pathological cases.
Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Cc: Gustavo A. R. Silva <gustavoars@kernel.org>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Leon Romanovsky <leon@kernel.org>
Cc: Keith Busch <kbusch@kernel.org>
Cc: Len Baker <len.baker@gmx.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
|
||
|
Kees Cook
|
28e77cc1c0 |
fortify: Detect struct member overflows in memset() at compile-time
As done for memcpy(), also update memset() to use the same tightened compile-time bounds checking under CONFIG_FORTIFY_SOURCE. Signed-off-by: Kees Cook <keescook@chromium.org> |
||
|
Kees Cook
|
938a000e3f |
fortify: Detect struct member overflows in memmove() at compile-time
As done for memcpy(), also update memmove() to use the same tightened compile-time checks under CONFIG_FORTIFY_SOURCE. Signed-off-by: Kees Cook <keescook@chromium.org> |
||
|
Kees Cook
|
f68f2ff915 |
fortify: Detect struct member overflows in memcpy() at compile-time
memcpy() is dead; long live memcpy()
tl;dr: In order to eliminate a large class of common buffer overflow
flaws that continue to persist in the kernel, have memcpy() (under
CONFIG_FORTIFY_SOURCE) perform bounds checking of the destination struct
member when they have a known size. This would have caught all of the
memcpy()-related buffer write overflow flaws identified in at least the
last three years.
Background and analysis:
While stack-based buffer overflow flaws are largely mitigated by stack
canaries (and similar) features, heap-based buffer overflow flaws continue
to regularly appear in the kernel. Many classes of heap buffer overflows
are mitigated by FORTIFY_SOURCE when using the strcpy() family of
functions, but a significant number remain exposed through the memcpy()
family of functions.
At its core, FORTIFY_SOURCE uses the compiler's __builtin_object_size()
internal[0] to determine the available size at a target address based on
the compile-time known structure layout details. It operates in two
modes: outer bounds (0) and inner bounds (1). In mode 0, the size of the
enclosing structure is used. In mode 1, the size of the specific field
is used. For example:
struct object {
u16 scalar1; /* 2 bytes */
char array[6]; /* 6 bytes */
u64 scalar2; /* 8 bytes */
u32 scalar3; /* 4 bytes */
u32 scalar4; /* 4 bytes */
} instance;
__builtin_object_size(instance.array, 0) == 22, since the remaining size
of the enclosing structure starting from "array" is 22 bytes (6 + 8 +
4 + 4).
__builtin_object_size(instance.array, 1) == 6, since the remaining size
of the specific field "array" is 6 bytes.
The initial implementation of FORTIFY_SOURCE used mode 0 because there
were many cases of both strcpy() and memcpy() functions being used to
write (or read) across multiple fields in a structure. For example,
it would catch this, which is writing 2 bytes beyond the end of
"instance":
memcpy(&instance.array, data, 25);
While this didn't protect against overwriting adjacent fields in a given
structure, it would at least stop overflows from reaching beyond the
end of the structure into neighboring memory, and provided a meaningful
mitigation of a subset of buffer overflow flaws. However, many desirable
targets remain within the enclosing structure (for example function
pointers).
As it happened, there were very few cases of strcpy() family functions
intentionally writing beyond the end of a string buffer. Once all known
cases were removed from the kernel, the strcpy() family was tightened[1]
to use mode 1, providing greater mitigation coverage.
What remains is switching memcpy() to mode 1 as well, but making the
switch is much more difficult because of how frustrating it can be to
find existing "normal" uses of memcpy() that expect to write (or read)
across multiple fields. The root cause of the problem is that the C
language lacks a common pattern to indicate the intent of an author's
use of memcpy(), and is further complicated by the available compile-time
and run-time mitigation behaviors.
The FORTIFY_SOURCE mitigation comes in two halves: the compile-time half,
when both the buffer size _and_ the length of the copy is known, and the
run-time half, when only the buffer size is known. If neither size is
known, there is no bounds checking possible. At compile-time when the
compiler sees that a length will always exceed a known buffer size,
a warning can be deterministically emitted. For the run-time half,
the length is tested against the known size of the buffer, and the
overflowing operation is detected. (The performance overhead for these
tests is virtually zero.)
It is relatively easy to find compile-time false-positives since a warning
is always generated. Fixing the false positives, however, can be very
time-consuming as there are hundreds of instances. While it's possible
some over-read conditions could lead to kernel memory exposures, the bulk
of the risk comes from the run-time flaws where the length of a write
may end up being attacker-controlled and lead to an overflow.
Many of the compile-time false-positives take a form similar to this:
memcpy(&instance.scalar2, data, sizeof(instance.scalar2) +
sizeof(instance.scalar3));
and the run-time ones are similar, but lack a constant expression for the
size of the copy:
memcpy(instance.array, data, length);
The former is meant to cover multiple fields (though its style has been
frowned upon more recently), but has been technically legal. Both lack
any expressivity in the C language about the author's _intent_ in a way
that a compiler can check when the length isn't known at compile time.
A comment doesn't work well because what's needed is something a compiler
can directly reason about. Is a given memcpy() call expected to overflow
into neighbors? Is it not? By using the new struct_group() macro, this
intent can be much more easily encoded.
It is not as easy to find the run-time false-positives since the code path
to exercise a seemingly out-of-bounds condition that is actually expected
may not be trivially reachable. Tightening the restrictions to block an
operation for a false positive will either potentially create a greater
flaw (if a copy is truncated by the mitigation), or destabilize the kernel
(e.g. with a BUG()), making things completely useless for the end user.
As a result, tightening the memcpy() restriction (when there is a
reasonable level of uncertainty of the number of false positives), needs
to first WARN() with no truncation. (Though any sufficiently paranoid
end-user can always opt to set the panic_on_warn=1 sysctl.) Once enough
development time has passed, the mitigation can be further intensified.
(Note that this patch is only the compile-time checking step, which is
a prerequisite to doing run-time checking, which will come in future
patches.)
Given the potential frustrations of weeding out all the false positives
when tightening the run-time checks, it is reasonable to wonder if these
changes would actually add meaningful protection. Looking at just the
last three years, there are 23 identified flaws with a CVE that mention
"buffer overflow", and 11 are memcpy()-related buffer overflows.
(For the remaining 12: 7 are array index overflows that would be
mitigated by systems built with CONFIG_UBSAN_BOUNDS=y: CVE-2019-0145,
CVE-2019-14835, CVE-2019-14896, CVE-2019-14897, CVE-2019-14901,
CVE-2019-17666, CVE-2021-28952. 2 are miscalculated allocation
sizes which could be mitigated with memory tagging: CVE-2019-16746,
CVE-2019-2181. 1 is an iovec buffer bug maybe mitigated by memory tagging:
CVE-2020-10742. 1 is a type confusion bug mitigated by stack canaries:
CVE-2020-10942. 1 is a string handling logic bug with no mitigation I'm
aware of: CVE-2021-28972.)
At my last count on an x86_64 allmodconfig build, there are 35,294
calls to memcpy(). With callers instrumented to report all places
where the buffer size is known but the length remains unknown (i.e. a
run-time bounds check is added), we can count how many new run-time
bounds checks are added when the destination and source arguments of
memcpy() are changed to use "mode 1" bounds checking: 1,276. This means
for the future run-time checking, there is a worst-case upper bounds
of 3.6% false positives to fix. In addition, there were around 150 new
compile-time warnings to evaluate and fix (which have now been fixed).
With this instrumentation it's also possible to compare the places where
the known 11 memcpy() flaw overflows manifested against the resulting
list of potential new run-time bounds checks, as a measure of potential
efficacy of the tightened mitigation. Much to my surprise, horror, and
delight, all 11 flaws would have been detected by the newly added run-time
bounds checks, making this a distinctly clear mitigation improvement: 100%
coverage for known memcpy() flaws, with a possible 2 orders of magnitude
gain in coverage over existing but undiscovered run-time dynamic length
flaws (i.e. 1265 newly covered sites in addition to the 11 known), against
only <4% of all memcpy() callers maybe gaining a false positive run-time
check, with only about 150 new compile-time instances needing evaluation.
Specifically these would have been mitigated:
CVE-2020-24490 https://git.kernel.org/linus/a2ec905d1e160a33b2e210e45ad30445ef26ce0e
CVE-2020-12654 https://git.kernel.org/linus/3a9b153c5591548612c3955c9600a98150c81875
CVE-2020-12653 https://git.kernel.org/linus/b70261a288ea4d2f4ac7cd04be08a9f0f2de4f4d
CVE-2019-14895 https://git.kernel.org/linus/3d94a4a8373bf5f45cf5f939e88b8354dbf2311b
CVE-2019-14816 https://git.kernel.org/linus/7caac62ed598a196d6ddf8d9c121e12e082cac3a
CVE-2019-14815 https://git.kernel.org/linus/7caac62ed598a196d6ddf8d9c121e12e082cac3a
CVE-2019-14814 https://git.kernel.org/linus/7caac62ed598a196d6ddf8d9c121e12e082cac3a
CVE-2019-10126 https://git.kernel.org/linus/69ae4f6aac1578575126319d3f55550e7e440449
CVE-2019-9500 https://git.kernel.org/linus/1b5e2423164b3670e8bc9174e4762d297990deff
no-CVE-yet https://git.kernel.org/linus/130f634da1af649205f4a3dd86cbe5c126b57914
no-CVE-yet https://git.kernel.org/linus/d10a87a3535cce2b890897914f5d0d83df669c63
To accelerate the review of potential run-time false positives, it's
also worth noting that it is possible to partially automate checking
by examining the memcpy() buffer argument to check for the destination
struct member having a neighboring array member. It is reasonable to
expect that the vast majority of run-time false positives would look like
the already evaluated and fixed compile-time false positives, where the
most common pattern is neighboring arrays. (And, FWIW, many of the
compile-time fixes were actual bugs, so it is reasonable to assume we'll
have similar cases of actual bugs getting fixed for run-time checks.)
Implementation:
Tighten the memcpy() destination buffer size checking to use the actual
("mode 1") target buffer size as the bounds check instead of their
enclosing structure's ("mode 0") size. Use a common inline for memcpy()
(and memmove() in a following patch), since all the tests are the
same. All new cross-field memcpy() uses must use the struct_group() macro
or similar to target a specific range of fields, so that FORTIFY_SOURCE
can reason about the size and safety of the copy.
For now, cross-member "mode 1" _read_ detection at compile-time will be
limited to W=1 builds, since it is, unfortunately, very common. As the
priority is solving write overflows, read overflows will be part of a
future phase (and can be fixed in parallel, for anyone wanting to look
at W=1 build output).
For run-time, the "mode 0" size checking and mitigation is left unchanged,
with "mode 1" to be added in stages. In this patch, no new run-time
checks are added. Future patches will first bounds-check writes,
and only perform a WARN() for now. This way any missed run-time false
positives can be flushed out over the coming several development cycles,
but system builders who have tested their workloads to be WARN()-free
can enable the panic_on_warn=1 sysctl to immediately gain a mitigation
against this class of buffer overflows. Once that is under way, run-time
bounds-checking of reads can be similarly enabled.
Related classes of flaws that will remain unmitigated:
- memcpy() with flexible array structures, as the compiler does not
currently have visibility into the size of the trailing flexible
array. These can be fixed in the future by refactoring such cases
to use a new set of flexible array structure helpers to perform the
common serialization/deserialization code patterns doing allocation
and/or copying.
- memcpy() with raw pointers (e.g. void *, char *, etc), or otherwise
having their buffer size unknown at compile time, have no good
mitigation beyond memory tagging (and even that would only protect
against inter-object overflow, not intra-object neighboring field
overflows), or refactoring. Some kind of "fat pointer" solution is
likely needed to gain proper size-of-buffer awareness. (e.g. see
struct membuf)
- type confusion where a higher level type's allocation size does
not match the resulting cast type eventually passed to a deeper
memcpy() call where the compiler cannot see the true type. In
theory, greater static analysis could catch these, and the use
of -Warray-bounds will help find some of these.
[0] https://gcc.gnu.org/onlinedocs/gcc/Object-Size-Checking.html
[1] https://git.kernel.org/linus/6a39e62abbafd1d58d1722f40c7d26ef379c6a2f
Signed-off-by: Kees Cook <keescook@chromium.org>
|
||
|
Jakub Kicinski
|
5b91c5cc0e |
Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
No conflicts. Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
Andy Shevchenko
|
f74a08fc61 |
vsprintf: Move space out of string literals in fourcc_string()
The literals "big-endian" and "little-endian" may be potentially occurred in other places. Dropping space allows linker to merge them by using only a single copy. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Reviewed-by: Petr Mladek <pmladek@suse.com> Signed-off-by: Petr Mladek <pmladek@suse.com> Link: https://lore.kernel.org/r/20220127181233.72910-2-andriy.shevchenko@linux.intel.com |
||
|
Andy Shevchenko
|
d75b26f880 |
vsprintf: Fix potential unaligned access
The %p4cc specifier in some cases might get an unaligned pointer.
Due to this we need to make copy to local variable once to avoid
potential crashes on some architectures due to improper access.
Fixes:
|
||
|
Jakub Kicinski
|
1127170d45 |
Merge https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Daniel Borkmann says:
====================
pull-request: bpf-next 2022-02-09
We've added 126 non-merge commits during the last 16 day(s) which contain
a total of 201 files changed, 4049 insertions(+), 2215 deletions(-).
The main changes are:
1) Add custom BPF allocator for JITs that pack multiple programs into a huge
page to reduce iTLB pressure, from Song Liu.
2) Add __user tagging support in vmlinux BTF and utilize it from BPF
verifier when generating loads, from Yonghong Song.
3) Add per-socket fast path check guarding from cgroup/BPF overhead when
used by only some sockets, from Pavel Begunkov.
4) Continued libbpf deprecation work of APIs/features and removal of their
usage from samples, selftests, libbpf & bpftool, from Andrii Nakryiko
and various others.
5) Improve BPF instruction set documentation by adding byte swap
instructions and cleaning up load/store section, from Christoph Hellwig.
6) Switch BPF preload infra to light skeleton and remove libbpf dependency
from it, from Alexei Starovoitov.
7) Fix architecture-agnostic macros in libbpf for accessing syscall
arguments from BPF progs for non-x86 architectures,
from Ilya Leoshkevich.
8) Rework port members in struct bpf_sk_lookup and struct bpf_sock to be
of 16-bit field with anonymous zero padding, from Jakub Sitnicki.
9) Add new bpf_copy_from_user_task() helper to read memory from a different
task than current. Add ability to create sleepable BPF iterator progs,
from Kenny Yu.
10) Implement XSK batching for ice's zero-copy driver used by AF_XDP and
utilize TX batching API from XSK buffer pool, from Maciej Fijalkowski.
11) Generate temporary netns names for BPF selftests to avoid naming
collisions, from Hangbin Liu.
12) Implement bpf_core_types_are_compat() with limited recursion for
in-kernel usage, from Matteo Croce.
13) Simplify pahole version detection and finally enable CONFIG_DEBUG_INFO_DWARF5
to be selected with CONFIG_DEBUG_INFO_BTF, from Nathan Chancellor.
14) Misc minor fixes to libbpf and selftests from various folks.
* https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (126 commits)
selftests/bpf: Cover 4-byte load from remote_port in bpf_sk_lookup
bpf: Make remote_port field in struct bpf_sk_lookup 16-bit wide
libbpf: Fix compilation warning due to mismatched printf format
selftests/bpf: Test BPF_KPROBE_SYSCALL macro
libbpf: Add BPF_KPROBE_SYSCALL macro
libbpf: Fix accessing the first syscall argument on s390
libbpf: Fix accessing the first syscall argument on arm64
libbpf: Allow overriding PT_REGS_PARM1{_CORE}_SYSCALL
selftests/bpf: Skip test_bpf_syscall_macro's syscall_arg1 on arm64 and s390
libbpf: Fix accessing syscall arguments on riscv
libbpf: Fix riscv register names
libbpf: Fix accessing syscall arguments on powerpc
selftests/bpf: Use PT_REGS_SYSCALL_REGS in bpf_syscall_macro
libbpf: Add PT_REGS_SYSCALL_REGS macro
selftests/bpf: Fix an endianness issue in bpf_syscall_macro test
bpf: Fix bpf_prog_pack build HPAGE_PMD_SIZE
bpf: Fix leftover header->pages in sparc and powerpc code.
libbpf: Fix signedness bug in btf_dump_array_data()
selftests/bpf: Do not export subtest as standalone test
bpf, x86_64: Fail gracefully on bpf_jit_binary_pack_finalize failures
...
====================
Link: https://lore.kernel.org/r/20220209210050.8425-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
||
|
Kees Cook
|
8e7c8ca6b9 |
test_overflow: Regularize test reporting output
Report test run summaries more regularly, so it's easier to understand
the output:
- Remove noisy "ok" reports for shift and allocator tests.
- Reorganize per-type output to the end of each type's tests.
- Replace redundant vmalloc tests with __vmalloc so that __GFP_NO_WARN
can be used to keep the expected failure warnings out of dmesg,
similar to commit
|
||
Dan Williams
|
3c5b903955 |
cxl: Prove CXL locking
When CONFIG_PROVE_LOCKING is enabled the 'struct device' definition gets an additional mutex that is not clobbered by lockdep_set_novalidate_class() like the typical device_lock(). This allows for local annotation of subsystem locks with mutex_lock_nested() per the subsystem's object/lock hierarchy. For CXL, this primarily needs the ability to lock ports by depth and child objects of ports by their parent parent-port lock. Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Reviewed-by: Ben Widawsky <ben.widawsky@intel.com> Link: https://lore.kernel.org/r/164365853422.99383.1052399160445197427.stgit@dwillia2-desk3.amr.corp.intel.com Signed-off-by: Dan Williams <dan.j.williams@intel.com> |
||
John Garry
|
3f607293b7 |
sbitmap: Delete old sbitmap_queue_get_shallow()
Since __sbitmap_queue_get_shallow() was introduced in commit
|
||
|
Ming Lei
|
3301bc5335 |
lib/sbitmap: kill 'depth' from sbitmap_word
Only the last sbitmap_word can have different depth, and all the others must have same depth of 1U << sb->shift, so not necessary to store it in sbitmap_word, and it can be retrieved easily and efficiently by adding one internal helper of __map_depth(sb, index). Remove 'depth' field from sbitmap_word, then the annotation of ____cacheline_aligned_in_smp for 'word' isn't needed any more. Not see performance effect when running high parallel IOPS test on null_blk. This way saves us one cacheline(usually 64 words) per each sbitmap_word. Cc: Martin Wilck <martin.wilck@suse.com> Signed-off-by: Ming Lei <ming.lei@redhat.com> Reviewed-by: Martin Wilck <mwilck@suse.com> Reviewed-by: John Garry <john.garry@huawei.com> Link: https://lore.kernel.org/r/20220110072945.347535-1-ming.lei@redhat.com Signed-off-by: Jens Axboe <axboe@kernel.dk> |
||
Eric Dumazet
|
c2d1e3df4a |
ref_tracker: remove filter_irq_stacks() call
After commit
|
||
|
Eric Dumazet
|
8fd5522f44 |
ref_tracker: add a count of untracked references
We are still chasing a netdev refcount imbalance, and we suspect we have one rogue dev_put() that is consuming a reference taken from a dev_hold_track() To detect this case, allow ref_tracker_alloc() and ref_tracker_free() to be called with a NULL @trackerp parameter, and use a dedicated refcount_t just for them. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> |
||
|
Eric Dumazet
|
e3ececfe66 |
ref_tracker: implement use-after-free detection
Whenever ref_tracker_dir_init() is called, mark the struct ref_tracker_dir as dead. Test the dead status from ref_tracker_alloc() and ref_tracker_free() This should detect buggy dev_put()/dev_hold() happening too late in netdevice dismantle process. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> |
||
|
Jason A. Donenfeld
|
d2a02e3c8b |
lib/crypto: blake2s: avoid indirect calls to compression function for Clang CFI
blake2s_compress_generic is weakly aliased by blake2s_compress. The
current harness for function selection uses a function pointer, which is
ordinarily inlined and resolved at compile time. But when Clang's CFI is
enabled, CFI still triggers when making an indirect call via a weak
symbol. This seems like a bug in Clang's CFI, as though it's bucketing
weak symbols and strong symbols differently. It also only seems to
trigger when "full LTO" mode is used, rather than "thin LTO".
[ 0.000000][ T0] Kernel panic - not syncing: CFI failure (target: blake2s_compress_generic+0x0/0x1444)
[ 0.000000][ T0] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.16.0-mainline-06981-g076c855b846e #1
[ 0.000000][ T0] Hardware name: MT6873 (DT)
[ 0.000000][ T0] Call trace:
[ 0.000000][ T0] dump_backtrace+0xfc/0x1dc
[ 0.000000][ T0] dump_stack_lvl+0xa8/0x11c
[ 0.000000][ T0] panic+0x194/0x464
[ 0.000000][ T0] __cfi_check_fail+0x54/0x58
[ 0.000000][ T0] __cfi_slowpath_diag+0x354/0x4b0
[ 0.000000][ T0] blake2s_update+0x14c/0x178
[ 0.000000][ T0] _extract_entropy+0xf4/0x29c
[ 0.000000][ T0] crng_initialize_primary+0x24/0x94
[ 0.000000][ T0] rand_initialize+0x2c/0x6c
[ 0.000000][ T0] start_kernel+0x2f8/0x65c
[ 0.000000][ T0] __primary_switched+0xc4/0x7be4
[ 0.000000][ T0] Rebooting in 5 seconds..
Nonetheless, the function pointer method isn't so terrific anyway, so
this patch replaces it with a simple boolean, which also gets inlined
away. This successfully works around the Clang bug.
In general, I'm not too keen on all of the indirection involved here; it
clearly does more harm than good. Hopefully the whole thing can get
cleaned up down the road when lib/crypto is overhauled more
comprehensively. But for now, we go with a simple bandaid.
Fixes:
|
||
Nathan Chancellor
|
42d9b379e3 |
lib/Kconfig.debug: Allow BTF + DWARF5 with pahole 1.21+
Commit
|
||
|
Nathan Chancellor
|
6323c81350 |
lib/Kconfig.debug: Use CONFIG_PAHOLE_VERSION
Now that CONFIG_PAHOLE_VERSION exists, use it in the definition of CONFIG_PAHOLE_HAS_SPLIT_BTF and CONFIG_PAHOLE_HAS_BTF_TAG to reduce the amount of duplication across the tree. Signed-off-by: Nathan Chancellor <nathan@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/20220201205624.652313-5-nathan@kernel.org |
||
|
Daniel Latypov
|
2b6861e237 |
kunit: factor out str constants from binary assertion structs
If the compiler doesn't optimize them away, each kunit assertion (use of
KUNIT_EXPECT_EQ, etc.) can use 88 bytes of stack space in the worst and
most common case. This has led to compiler warnings and a suggestion
from Linus to move data from the structs into static const's where
possible [1].
This builds upon [2] which did so for the base struct kunit_assert type.
That only reduced sizeof(struct kunit_binary_assert) from 88 to 64.
Given these are by far the most commonly used asserts, this patch
factors out the textual representations of the operands and comparator
into another static const, saving 16 more bytes.
In detail, KUNIT_EXPECT_EQ(test, 2 + 2, 5) yields the following struct
(struct kunit_binary_assert) {
.assert = <struct kunit_assert>,
.operation = "==",
.left_text = "2 + 2",
.left_value = 4,
.right_text = "5",
.right_value = 5,
}
After this change
static const struct kunit_binary_assert_text __text = {
.operation = "==",
.left_text = "2 + 2",
.right_text = "5",
};
(struct kunit_binary_assert) {
.assert = <struct kunit_assert>,
.text = &__text,
.left_value = 4,
.right_value = 5,
}
This also DRYs the code a bit more since these str fields were repeated
for the string and pointer versions of kunit_binary_assert.
Note: we could name the kunit_binary_assert_text fields left/right
instead of left_text/right_text. But that would require changing the
macros a bit since they have args called "left" and "right" which would
be substituted in `.left = #left` as `.2 + 2 = \"2 + 2\"`.
[1] https://groups.google.com/g/kunit-dev/c/i3fZXgvBrfA/m/VULQg1z6BAAJ
[2] https://lore.kernel.org/linux-kselftest/20220113165931.451305-6-dlatypov@google.com/
Signed-off-by: Daniel Latypov <dlatypov@google.com>
Reviewed-by: David Gow <davidgow@google.com>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
||
|
Daniel Latypov
|
6419abb80e |
kunit: remove va_format from kunit_assert
The concern is that having a lot of redundant fields in kunit_assert can blow up stack usage if the compiler doesn't optimize them away [1]. The comment on this field implies that it was meant to be initialized when the expect/assert was declared, but this only happens when we run kunit_do_failed_assertion(). We don't need to access it outside of that function, so move it out of the struct and make it a local variable there. This change also takes the chance to reduce the number of macros by inlining the now simplified KUNIT_INIT_ASSERT_STRUCT() macro. [1] https://groups.google.com/g/kunit-dev/c/i3fZXgvBrfA/m/VULQg1z6BAAJ Signed-off-by: Daniel Latypov <dlatypov@google.com> Reviewed-by: David Gow <davidgow@google.com> Reviewed-by: Brendan Higgins <brendanhiggins@google.com> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org> |
||
Kevin Bracey
|
1b3dce8b8a |
lib/crc32test: correct printed bytes count
crc32c_le self test had a stray multiply by two inherited from the crc32_le+crc32_be test loop. Signed-off-by: Kevin Bracey <kevin@bracey.fi> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> |
||
|
Kevin Bracey
|
5cb29be47d |
lib/crc32: Make crc32_be weak for arch override
crc32_le and __crc32c_le can be overridden - extend this to crc32_be. Signed-off-by: Kevin Bracey <kevin@bracey.fi> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> |
||
|
Kevin Bracey
|
163a4e7fa7 |
lib/crc32: remove unneeded casts
Casts were added in commit |
||
|
Marco Elver
|
09c6304e38 |
kasan: test: fix compatibility with FORTIFY_SOURCE
With CONFIG_FORTIFY_SOURCE enabled, string functions will also perform dynamic checks using __builtin_object_size(ptr), which when failed will panic the kernel. Because the KASAN test deliberately performs out-of-bounds operations, the kernel panics with FORTIFY_SOURCE, for example: | kernel BUG at lib/string_helpers.c:910! | invalid opcode: 0000 [#1] PREEMPT SMP KASAN PTI | CPU: 1 PID: 137 Comm: kunit_try_catch Tainted: G B 5.16.0-rc3+ #3 | Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.14.0-2 04/01/2014 | RIP: 0010:fortify_panic+0x19/0x1b | ... | Call Trace: | kmalloc_oob_in_memset.cold+0x16/0x16 | ... Fix it by also hiding `ptr` from the optimizer, which will ensure that __builtin_object_size() does not return a valid size, preventing fortified string functions from panicking. Link: https://lkml.kernel.org/r/20220124160744.1244685-1-elver@google.com Signed-off-by: Marco Elver <elver@google.com> Reported-by: Nico Pache <npache@redhat.com> Reviewed-by: Nico Pache <npache@redhat.com> Reviewed-by: Andrey Konovalov <andreyknvl@gmail.com> Reviewed-by: Kees Cook <keescook@chromium.org> Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com> Cc: Alexander Potapenko <glider@google.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Brendan Higgins <brendanhiggins@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
Tianjia Zhang
|
eb90686d5d |
crypto: sm3 - create SM3 stand-alone library
Stand-alone implementation of the SM3 algorithm. It is designed to have as little dependencies as possible. In other cases you should generally use the hash APIs from include/crypto/hash.h. Especially when hashing large amounts of data as those APIs may be hw-accelerated. In the new SM3 stand-alone library, sm3_transform() has also been optimized, instead of simply using the code in sm3_generic. Signed-off-by: Tianjia Zhang <tianjia.zhang@linux.alibaba.com> Reviewed-by: Gilad Ben-Yossef <gilad@benyossef.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> |
||
Yonghong Song
|
7472d5a642 |
compiler_types: define __user as __attribute__((btf_type_tag("user")))
The __user attribute is currently mainly used by sparse for type checking.
The attribute indicates whether a memory access is in user memory address
space or not. Such information is important during tracing kernel
internal functions or data structures as accessing user memory often
has different mechanisms compared to accessing kernel memory. For example,
the perf-probe needs explicit command line specification to indicate a
particular argument or string in user-space memory ([1], [2], [3]).
Currently, vmlinux BTF is available in kernel with many distributions.
If __user attribute information is available in vmlinux BTF, the explicit
user memory access information from users will not be necessary as
the kernel can figure it out by itself with vmlinux BTF.
Besides the above possible use for perf/probe, another use case is
for bpf verifier. Currently, for bpf BPF_PROG_TYPE_TRACING type of bpf
programs, users can write direct code like
p->m1->m2
and "p" could be a function parameter. Without __user information in BTF,
the verifier will assume p->m1 accessing kernel memory and will generate
normal loads. Let us say "p" actually tagged with __user in the source
code. In such cases, p->m1 is actually accessing user memory and direct
load is not right and may produce incorrect result. For such cases,
bpf_probe_read_user() will be the correct way to read p->m1.
To support encoding __user information in BTF, a new attribute
__attribute__((btf_type_tag("<arbitrary_string>")))
is implemented in clang ([4]). For example, if we have
#define __user __attribute__((btf_type_tag("user")))
during kernel compilation, the attribute "user" information will
be preserved in dwarf. After pahole converting dwarf to BTF, __user
information will be available in vmlinux BTF.
The following is an example with latest upstream clang (clang14) and
pahole 1.23:
[$ ~] cat test.c
#define __user __attribute__((btf_type_tag("user")))
int foo(int __user *arg) {
return *arg;
}
[$ ~] clang -O2 -g -c test.c
[$ ~] pahole -JV test.o
...
[1] INT int size=4 nr_bits=32 encoding=SIGNED
[2] TYPE_TAG user type_id=1
[3] PTR (anon) type_id=2
[4] FUNC_PROTO (anon) return=1 args=(3 arg)
[5] FUNC foo type_id=4
[$ ~]
You can see for the function argument "int __user *arg", its type is
described as
PTR -> TYPE_TAG(user) -> INT
The kernel can use this information for bpf verification or other
use cases.
Current btf_type_tag is only supported in clang (>= clang14) and
pahole (>= 1.23). gcc support is also proposed and under development ([5]).
[1] http://lkml.kernel.org/r/155789874562.26965.10836126971405890891.stgit@devnote2
[2] http://lkml.kernel.org/r/155789872187.26965.4468456816590888687.stgit@devnote2
[3] http://lkml.kernel.org/r/155789871009.26965.14167558859557329331.stgit@devnote2
[4] https://reviews.llvm.org/D111199
[5] https://lore.kernel.org/bpf/0cbeb2fb-1a18-f690-e360-24b1c90c2a91@fb.com/
Signed-off-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/r/20220127154600.652613-1-yhs@fb.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
||
Laibin Qiu
|
10825410b9 |
blk-mq: Fix wrong wakeup batch configuration which will cause hang
Commit |
||
|
Daniel Latypov
|
21957f90b2 |
kunit: split out part of kunit_assert into a static const
This is per Linus's suggestion in [1].
The issue there is that every KUNIT_EXPECT/KUNIT_ASSERT puts a
kunit_assert object onto the stack. Normally we rely on compilers to
elide this, but when that doesn't work out, this blows up the stack
usage of kunit test functions.
We can move some data off the stack by making it static.
This change introduces a new `struct kunit_loc` to hold the file and
line number and then just passing assert_type (EXPECT or ASSERT) as an
argument.
In [1], it was suggested to also move out the format string as well, but
users could theoretically craft a format string at runtime, so we can't.
This change leaves a copy of `assert_type` in kunit_assert for now
because cleaning up all the macros to not pass it around is a bit more
involved.
Here's an example of the expanded code for KUNIT_FAIL():
if (__builtin_expect(!!(!(false)), 0)) {
static const struct kunit_loc loc = { .file = ... };
struct kunit_fail_assert __assertion = { .assert = { .type ... };
kunit_do_failed_assertion(test, &loc, KUNIT_EXPECTATION, &__assertion.assert, ...);
};
[1] https://groups.google.com/g/kunit-dev/c/i3fZXgvBrfA/m/VULQg1z6BAAJ
Signed-off-by: Daniel Latypov <dlatypov@google.com>
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Reviewed-by: David Gow <davidgow@google.com>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
||
|
Daniel Latypov
|
dd640d7087 |
kunit: factor out kunit_base_assert_format() call into kunit_fail()
We call this function first thing for all the assertion `format()` functions. This is the part that prints the file and line number and assertion type (EXPECTATION, ASSERTION). Having it as part of the format functions lets us have the flexibility to not print that information (or print it differently) for new assertion types, but I think this we don't need that. And in the future, we'd like to consider factoring that data (file, line#, type) out of the kunit_assert struct and into a `static` variable, as Linus suggested [1], so we'd need to extract it anyways. [1] https://groups.google.com/g/kunit-dev/c/i3fZXgvBrfA/m/VULQg1z6BAAJ Signed-off-by: Daniel Latypov <dlatypov@google.com> Reviewed-by: David Gow <davidgow@google.com> Reviewed-by: Brendan Higgins <brendanhiggins@google.com> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org> |
||
|
Daniel Latypov
|
4fdacef8ac |
kunit: move check if assertion passed into the macros
Currently the code always calls kunit_do_assertion() even though it does nothing when `pass` is true. This change moves the `if(!(pass))` check into the macro instead and renames the function to kunit_do_failed_assertion(). I feel this a bit easier to read and understand. This has the potential upside of avoiding a function call that does nothing most of the time (assuming your tests are passing) but comes with the downside of generating a bit more code and branches. We try to mitigate the branches by tagging them with `unlikely()`. This also means we don't have to initialize structs that we don't need, which will become a tiny bit more expensive if we switch over to using static variables to try and reduce stack usage. (There's runtime code to check if the variable has been initialized yet or not). Signed-off-by: Daniel Latypov <dlatypov@google.com> Reviewed-by: Brendan Higgins <brendanhiggins@google.com> Reviewed-by: David Gow <davidgow@google.com> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org> |
||
|
Daniel Latypov
|
7b3391057f |
kunit: add example test case showing off all the expect macros
Currently, these macros are only really documented near the bottom of https://www.kernel.org/doc/html/latest/dev-tools/kunit/api/test.html#c.KUNIT_FAIL. E.g. it's likely someone might just not realize that KUNIT_EXPECT_STREQ() exists and instead use KUNIT_EXPECT_FALSE(strcmp()) or similar. This can also serve as a basic smoketest that the KUnit assert machinery still works for all the macros. Signed-off-by: Daniel Latypov <dlatypov@google.com> Reviewed-by: Brendan Higgins <brendanhiggins@google.com> Reviewed-by: David Gow <davidgow@google.com> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org> |
||
|
Linus Torvalds
|
3689f9f8b0 |
bitmap patches for 5.17-rc1
-----BEGIN PGP SIGNATURE-----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=RKW4
-----END PGP SIGNATURE-----
Merge tag 'bitmap-5.17-rc1' of git://github.com/norov/linux
Pull bitmap updates from Yury Norov:
- introduce for_each_set_bitrange()
- use find_first_*_bit() instead of find_next_*_bit() where possible
- unify for_each_bit() macros
* tag 'bitmap-5.17-rc1' of git://github.com/norov/linux:
vsprintf: rework bitmap_list_string
lib: bitmap: add performance test for bitmap_print_to_pagebuf
bitmap: unify find_bit operations
mm/percpu: micro-optimize pcpu_is_populated()
Replace for_each_*_bit_from() with for_each_*_bit() where appropriate
find: micro-optimize for_each_{set,clear}_bit()
include/linux: move for_each_bit() macros from bitops.h to find.h
cpumask: replace cpumask_next_* with cpumask_first_* where appropriate
tools: sync tools/bitmap with mother linux
all: replace find_next{,_zero}_bit with find_first{,_zero}_bit where appropriate
cpumask: use find_first_and_bit()
lib: add find_first_and_bit()
arch: remove GENERIC_FIND_FIRST_BIT entirely
include: move find.h from asm_generic to linux
bitops: move find_bit_*_le functions from le.h to find.h
bitops: protect find_first_{,zero}_bit properly
|
||
|
Marco Elver
|
e940066089 |
lib/stackdepot: always do filter_irq_stacks() in stack_depot_save()
The non-interrupt portion of interrupt stack traces before interrupt entry is usually arbitrary. Therefore, saving stack traces of interrupts (that include entries before interrupt entry) to stack depot leads to unbounded stackdepot growth. As such, use of filter_irq_stacks() is a requirement to ensure stackdepot can efficiently deduplicate interrupt stacks. Looking through all current users of stack_depot_save(), none (except KASAN) pass the stack trace through filter_irq_stacks() before passing it on to stack_depot_save(). Rather than adding filter_irq_stacks() to all current users of stack_depot_save(), it became clear that stack_depot_save() should simply do filter_irq_stacks(). Link: https://lkml.kernel.org/r/20211130095727.2378739-1-elver@google.com Signed-off-by: Marco Elver <elver@google.com> Reviewed-by: Alexander Potapenko <glider@google.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Reviewed-by: Andrey Konovalov <andreyknvl@gmail.com> Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Vijayanand Jitta <vjitta@codeaurora.org> Cc: "Gustavo A. R. Silva" <gustavoars@kernel.org> Cc: Imran Khan <imran.f.khan@oracle.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Jani Nikula <jani.nikula@intel.com> Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Vlastimil Babka
|
2dba5eb1c7 |
lib/stackdepot: allow optional init and stack_table allocation by kvmalloc()
Currently, enabling CONFIG_STACKDEPOT means its stack_table will be allocated from memblock, even if stack depot ends up not actually used. The default size of stack_table is 4MB on 32-bit, 8MB on 64-bit. This is fine for use-cases such as KASAN which is also a config option and has overhead on its own. But it's an issue for functionality that has to be actually enabled on boot (page_owner) or depends on hardware (GPU drivers) and thus the memory might be wasted. This was raised as an issue [1] when attempting to add stackdepot support for SLUB's debug object tracking functionality. It's common to build kernels with CONFIG_SLUB_DEBUG and enable slub_debug on boot only when needed, or create only specific kmem caches with debugging for testing purposes. It would thus be more efficient if stackdepot's table was allocated only when actually going to be used. This patch thus makes the allocation (and whole stack_depot_init() call) optional: - Add a CONFIG_STACKDEPOT_ALWAYS_INIT flag to keep using the current well-defined point of allocation as part of mem_init(). Make CONFIG_KASAN select this flag. - Other users have to call stack_depot_init() as part of their own init when it's determined that stack depot will actually be used. This may depend on both config and runtime conditions. Convert current users which are page_owner and several in the DRM subsystem. Same will be done for SLUB later. - Because the init might now be called after the boot-time memblock allocation has given all memory to the buddy allocator, change stack_depot_init() to allocate stack_table with kvmalloc() when memblock is no longer available. Also handle allocation failure by disabling stackdepot (could have theoretically happened even with memblock allocation previously), and don't unnecessarily align the memblock allocation to its own size anymore. [1] https://lore.kernel.org/all/CAMuHMdW=eoVzM1Re5FVoEN87nKfiLmM2+Ah7eNu2KXEhCvbZyA@mail.gmail.com/ Link: https://lkml.kernel.org/r/20211013073005.11351-1-vbabka@suse.cz Signed-off-by: Vlastimil Babka <vbabka@suse.cz> Acked-by: Dmitry Vyukov <dvyukov@google.com> Reviewed-by: Marco Elver <elver@google.com> # stackdepot Cc: Marco Elver <elver@google.com> Cc: Vijayanand Jitta <vjitta@codeaurora.org> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Maxime Ripard <mripard@kernel.org> Cc: Thomas Zimmermann <tzimmermann@suse.de> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com> Cc: Alexander Potapenko <glider@google.com> Cc: Andrey Konovalov <andreyknvl@gmail.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Oliver Glitta <glittao@gmail.com> Cc: Imran Khan <imran.f.khan@oracle.com> From: Colin Ian King <colin.king@canonical.com> Subject: lib/stackdepot: fix spelling mistake and grammar in pr_err message There is a spelling mistake of the work allocation so fix this and re-phrase the message to make it easier to read. Link: https://lkml.kernel.org/r/20211015104159.11282-1-colin.king@canonical.com Signed-off-by: Colin Ian King <colin.king@canonical.com> Cc: Vlastimil Babka <vbabka@suse.cz> From: Vlastimil Babka <vbabka@suse.cz> Subject: lib/stackdepot: allow optional init and stack_table allocation by kvmalloc() - fixup On FLATMEM, we call page_ext_init_flatmem_late() just before kmem_cache_init() which means stack_depot_init() (called by page owner init) will not recognize properly it should use kvmalloc() and not memblock_alloc(). memblock_alloc() will also not issue a warning and return a block memory that can be invalid and cause kernel page fault when saving stacks, as reported by the kernel test robot [1]. Fix this by moving page_ext_init_flatmem_late() below kmem_cache_init() so that slab_is_available() is true during stack_depot_init(). SPARSEMEM doesn't have this issue, as it doesn't do page_ext_init_flatmem_late(), but a different page_ext_init() even later in the boot process. Thanks to Mike Rapoport for pointing out the FLATMEM init ordering issue. While at it, also actually resolve a checkpatch warning in stack_depot_init() from DRM CI, which was supposed to be in the original patch already. [1] https://lore.kernel.org/all/20211014085450.GC18719@xsang-OptiPlex-9020/ Link: https://lkml.kernel.org/r/6abd9213-19a9-6d58-cedc-2414386d2d81@suse.cz Signed-off-by: Vlastimil Babka <vbabka@suse.cz> Reported-by: kernel test robot <oliver.sang@intel.com> Cc: Mike Rapoport <rppt@kernel.org> Cc: Stephen Rothwell <sfr@canb.auug.org.au> From: Vlastimil Babka <vbabka@suse.cz> Subject: lib/stackdepot: allow optional init and stack_table allocation by kvmalloc() - fixup3 Due to |
||
Luis Chamberlain
|
04bc883c98 |
test_sysctl: simplify subdirectory registration with register_sysctl()
There is no need to user boiler plate code to specify a set of base
directories we're going to stuff sysctls under. Simplify this by using
register_sysctl() and specifying the directory path directly.
// pycocci sysctl-subdir-register-sysctl-simplify.cocci lib/test_sysctl.c
@c1@
expression E1;
identifier subdir, sysctls;
@@
static struct ctl_table subdir[] = {
{
.procname = E1,
.maxlen = 0,
.mode = 0555,
.child = sysctls,
},
{ }
};
@c2@
identifier c1.subdir;
expression E2;
identifier base;
@@
static struct ctl_table base[] = {
{
.procname = E2,
.maxlen = 0,
.mode = 0555,
.child = subdir,
},
{ }
};
@c3@
identifier c2.base;
identifier header;
@@
header = register_sysctl_table(base);
@r1 depends on c1 && c2 && c3@
expression c1.E1;
identifier c1.subdir, c1.sysctls;
@@
-static struct ctl_table subdir[] = {
- {
- .procname = E1,
- .maxlen = 0,
- .mode = 0555,
- .child = sysctls,
- },
- { }
-};
@r2 depends on c1 && c2 && c3@
identifier c1.subdir;
expression c2.E2;
identifier c2.base;
@@
-static struct ctl_table base[] = {
- {
- .procname = E2,
- .maxlen = 0,
- .mode = 0555,
- .child = subdir,
- },
- { }
-};
@initialize:python@
@@
def make_my_fresh_expression(s1, s2):
return '"' + s1.strip('"') + "/" + s2.strip('"') + '"'
@r3 depends on c1 && c2 && c3@
expression c1.E1;
identifier c1.sysctls;
expression c2.E2;
identifier c2.base;
identifier c3.header;
fresh identifier E3 = script:python(E2, E1) { make_my_fresh_expression(E2, E1) };
@@
header =
-register_sysctl_table(base);
+register_sysctl(E3, sysctls);
Generated-by: Coccinelle SmPL
Link: https://lkml.kernel.org/r/20211123202422.819032-6-mcgrof@kernel.org
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Amir Goldstein <amir73il@gmail.com>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Antti Palosaari <crope@iki.fi>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Benjamin LaHaise <bcrl@kvack.org>
Cc: Clemens Ladisch <clemens@ladisch.de>
Cc: David Airlie <airlied@linux.ie>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Iurii Zaikin <yzaikin@google.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Julia Lawall <julia.lawall@inria.fr>
Cc: Kees Cook <keescook@chromium.org>
Cc: Lukas Middendorf <kernel@tuxforce.de>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Paul Turner <pjt@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Phillip Potter <phil@philpotter.co.uk>
Cc: Qing Wang <wangqing@vivo.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Sebastian Reichel <sre@kernel.org>
Cc: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: Stephen Kitt <steve@sk2.org>
Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Cc: Xiaoming Ni <nixiaoming@huawei.com>
Cc: Douglas Gilbert <dgilbert@interlog.com>
Cc: James E.J. Bottomley <jejb@linux.ibm.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: John Ogness <john.ogness@linutronix.de>
Cc: Martin K. Petersen <martin.petersen@oracle.com>
Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Cc: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: "Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
||
|
Linus Torvalds
|
3c7c25038b |
block-5.17-2022-01-21
-----BEGIN PGP SIGNATURE----- iQJEBAABCAAuFiEEwPw5LcreJtl1+l5K99NY+ylx4KYFAmHqtecQHGF4Ym9lQGtl cm5lbC5kawAKCRD301j7KXHgph8iD/9nahzCdiPYRE+POHneiZbfaEnBEVFH7cz1 rbEjiAR5EbkLxGZohEkIjbHuZyiF8cP6l8f1D5aEmqiFZfiuib8UOVURk9ZQdEMU lXnOhEuRopQnGGyzSs0yXdx8rZ8xvijmg2UDjwl/VZ4UMgkyD4NjFqNEjdXkmQPP pWWDkg4CQJIJ9jYeIKtfwijfeyi2LMkYniZFuwiYTAf+9Zt8OIrg7LtDkHulhMqk V/c5TSho9p22Hv0q6edQSbWhdm6QZ+MRz71Nsycr9cdvvO1jKoLKlcuXwlhqEB1q BMkwuJI4hhcauqKtwIqNIM+ulNj8HsPqRxP6n9b4RL017dhDLIrbeiOL0qG3PUNi VbC7EGvQIqTNp0zeyeIV3xM9jaBMbh+FpCqtzdT1ZKlPI4jOB89x7lXKpG30ixA2 8nWXOiRE+UxXT96EbP6cLS/ykfvMiPqbVOSXdPl9d78R1j+xQVnBdMQoX2Yp/j1Y qN40Lp2mQgNJjkIiLOZxncx2xSx1/EVTDW1OPEm2Atv/NGxSK5vaN1P+X9DKB3e7 pjpKHhvJuNy6c3yeJs5tyZrBu1zZl1dCMxC3fhK8XNTTWJ3zBiUxicDCsGN7YCwR 5VJ+FbVATrzauBPtT7uQYRFnFePu1RxY5xTCdbg04hgGZmSSIqmJvZSpqp5Nn90s M0NbwyQrLg== =cebW -----END PGP SIGNATURE----- Merge tag 'block-5.17-2022-01-21' of git://git.kernel.dk/linux-block Pull block fixes from Jens Axboe: "Various little minor fixes that should go into this release: - Fix issue with cloned bios and IO accounting (Christoph) - Remove redundant assignments (Colin, GuoYong) - Fix an issue with the mq-deadline async_depth sysfs interface (me) - Fix brd module loading race (Tetsuo) - Shared tag map wakeup fix (Laibin) - End of bdev read fix (OGAWA) - srcu leak fix (Ming)" * tag 'block-5.17-2022-01-21' of git://git.kernel.dk/linux-block: block: fix async_depth sysfs interface for mq-deadline block: Fix wrong offset in bio_truncate() block: assign bi_bdev for cloned bios in blk_rq_prep_clone block: cleanup q->srcu block: Remove unnecessary variable assignment brd: remove brd_devices_mutex mutex aoe: remove redundant assignment on variable n loop: remove redundant initialization of pointer node blk-mq: fix tag_get wait task can't be awakened |
||
|
Linus Torvalds
|
fa2e1ba3e9 |
Networking fixes for 5.17-rc1, including fixes from netfilter, bpf.
Current release - regressions:
- fix memory leaks in the skb free deferral scheme if upper layer
protocols are used, i.e. in-kernel TCP readers like TLS
Current release - new code bugs:
- nf_tables: fix NULL check typo in _clone() functions
- change the default to y for Vertexcom vendor Kconfig
- a couple of fixes to incorrect uses of ref tracking
- two fixes for constifying netdev->dev_addr
Previous releases - regressions:
- bpf:
- various verifier fixes mainly around register offset handling
when passed to helper functions
- fix mount source displayed for bpffs (none -> bpffs)
- bonding:
- fix extraction of ports for connection hash calculation
- fix bond_xmit_broadcast return value when some devices are down
- phy: marvell: add Marvell specific PHY loopback
- sch_api: don't skip qdisc attach on ingress, prevent ref leak
- htb: restore minimal packet size handling in rate control
- sfp: fix high power modules without diagnostic monitoring
- mscc: ocelot:
- don't let phylink re-enable TX PAUSE on the NPI port
- don't dereference NULL pointers with shared tc filters
- smsc95xx: correct reset handling for LAN9514
- cpsw: avoid alignment faults by taking NET_IP_ALIGN into account
- phy: micrel: use kszphy_suspend/_resume for irq aware devices,
avoid races with the interrupt
Previous releases - always broken:
- xdp: check prog type before updating BPF link
- smc: resolve various races around abnormal connection termination
- sit: allow encapsulated IPv6 traffic to be delivered locally
- axienet: fix init/reset handling, add missing barriers,
read the right status words, stop queues correctly
- add missing dev_put() in sock_timestamping_bind_phc()
Misc:
- ipv4: prevent accidentally passing RTO_ONLINK to
ip_route_output_key_hash() by sanitizing flags
- ipv4: avoid quadratic behavior in netns dismantle
- stmmac: dwmac-oxnas: add support for OX810SE
- fsl: xgmac_mdio: add workaround for erratum A-009885
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=XM4Y
-----END PGP SIGNATURE-----
Merge tag 'net-5.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from netfilter, bpf.
Quite a handful of old regression fixes but most of those are
pre-5.16.
Current release - regressions:
- fix memory leaks in the skb free deferral scheme if upper layer
protocols are used, i.e. in-kernel TCP readers like TLS
Current release - new code bugs:
- nf_tables: fix NULL check typo in _clone() functions
- change the default to y for Vertexcom vendor Kconfig
- a couple of fixes to incorrect uses of ref tracking
- two fixes for constifying netdev->dev_addr
Previous releases - regressions:
- bpf:
- various verifier fixes mainly around register offset handling
when passed to helper functions
- fix mount source displayed for bpffs (none -> bpffs)
- bonding:
- fix extraction of ports for connection hash calculation
- fix bond_xmit_broadcast return value when some devices are down
- phy: marvell: add Marvell specific PHY loopback
- sch_api: don't skip qdisc attach on ingress, prevent ref leak
- htb: restore minimal packet size handling in rate control
- sfp: fix high power modules without diagnostic monitoring
- mscc: ocelot:
- don't let phylink re-enable TX PAUSE on the NPI port
- don't dereference NULL pointers with shared tc filters
- smsc95xx: correct reset handling for LAN9514
- cpsw: avoid alignment faults by taking NET_IP_ALIGN into account
- phy: micrel: use kszphy_suspend/_resume for irq aware devices,
avoid races with the interrupt
Previous releases - always broken:
- xdp: check prog type before updating BPF link
- smc: resolve various races around abnormal connection termination
- sit: allow encapsulated IPv6 traffic to be delivered locally
- axienet: fix init/reset handling, add missing barriers, read the
right status words, stop queues correctly
- add missing dev_put() in sock_timestamping_bind_phc()
Misc:
- ipv4: prevent accidentally passing RTO_ONLINK to
ip_route_output_key_hash() by sanitizing flags
- ipv4: avoid quadratic behavior in netns dismantle
- stmmac: dwmac-oxnas: add support for OX810SE
- fsl: xgmac_mdio: add workaround for erratum A-009885"
* tag 'net-5.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (92 commits)
ipv4: add net_hash_mix() dispersion to fib_info_laddrhash keys
ipv4: avoid quadratic behavior in netns dismantle
net/fsl: xgmac_mdio: Fix incorrect iounmap when removing module
powerpc/fsl/dts: Enable WA for erratum A-009885 on fman3l MDIO buses
dt-bindings: net: Document fsl,erratum-a009885
net/fsl: xgmac_mdio: Add workaround for erratum A-009885
net: mscc: ocelot: fix using match before it is set
net: phy: micrel: use kszphy_suspend()/kszphy_resume for irq aware devices
net: cpsw: avoid alignment faults by taking NET_IP_ALIGN into account
nfc: llcp: fix NULL error pointer dereference on sendmsg() after failed bind()
net: axienet: increase default TX ring size to 128
net: axienet: fix for TX busy handling
net: axienet: fix number of TX ring slots for available check
net: axienet: Fix TX ring slot available check
net: axienet: limit minimum TX ring size
net: axienet: add missing memory barriers
net: axienet: reset core on initialization prior to MDIO access
net: axienet: Wait for PhyRstCmplt after core reset
net: axienet: increase reset timeout
bpf, selftests: Add ringbuf memory type confusion test
...
|
||
|
Linus Torvalds
|
f4484d138b |
Merge branch 'akpm' (patches from Andrew)
Merge more updates from Andrew Morton: "55 patches. Subsystems affected by this patch series: percpu, procfs, sysctl, misc, core-kernel, get_maintainer, lib, checkpatch, binfmt, nilfs2, hfs, fat, adfs, panic, delayacct, kconfig, kcov, and ubsan" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (55 commits) lib: remove redundant assignment to variable ret ubsan: remove CONFIG_UBSAN_OBJECT_SIZE kcov: fix generic Kconfig dependencies if ARCH_WANTS_NO_INSTR lib/Kconfig.debug: make TEST_KMOD depend on PAGE_SIZE_LESS_THAN_256KB btrfs: use generic Kconfig option for 256kB page size limit arch/Kconfig: split PAGE_SIZE_LESS_THAN_256KB from PAGE_SIZE_LESS_THAN_64KB configs: introduce debug.config for CI-like setup delayacct: track delays from memory compact Documentation/accounting/delay-accounting.rst: add thrashing page cache and direct compact delayacct: cleanup flags in struct task_delay_info and functions use it delayacct: fix incomplete disable operation when switch enable to disable delayacct: support swapin delay accounting for swapping without blkio panic: remove oops_id panic: use error_report_end tracepoint on warnings fs/adfs: remove unneeded variable make code cleaner FAT: use io_schedule_timeout() instead of congestion_wait() hfsplus: use struct_group_attr() for memcpy() region nilfs2: remove redundant pointer sbufs fs/binfmt_elf: use PT_LOAD p_align values for static PIE const_structs.checkpatch: add frequently used ops structs ... |
||
Colin Ian King
|
b1e78ef3be |
lib: remove redundant assignment to variable ret
The variable ret is being assigned a value that is never read. If the for-loop is entered then ret is immediately re-assigned a new value. If the for-loop is not executed ret is never read. The assignment is redundant and can be removed. Link: https://lkml.kernel.org/r/20211230134557.83633-1-colin.i.king@gmail.com Signed-off-by: Colin Ian King <colin.i.king@gmail.com> Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Kees Cook
|
69d0db01e2 |
ubsan: remove CONFIG_UBSAN_OBJECT_SIZE
The object-size sanitizer is redundant to -Warray-bounds, and inappropriately performs its checks at run-time when all information needed for the evaluation is available at compile-time, making it quite difficult to use: https://bugzilla.kernel.org/show_bug.cgi?id=214861 With -Warray-bounds almost enabled globally, it doesn't make sense to keep this around. Link: https://lkml.kernel.org/r/20211203235346.110809-1-keescook@chromium.org Signed-off-by: Kees Cook <keescook@chromium.org> Reviewed-by: Marco Elver <elver@google.com> Cc: Masahiro Yamada <masahiroy@kernel.org> Cc: Michal Marek <michal.lkml@markovi.net> Cc: Nick Desaulniers <ndesaulniers@google.com> Cc: Nathan Chancellor <nathan@kernel.org> Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com> Cc: "Peter Zijlstra (Intel)" <peterz@infradead.org> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Marco Elver
|
bece04b5b4 |
kcov: fix generic Kconfig dependencies if ARCH_WANTS_NO_INSTR
Until recent versions of GCC and Clang, it was not possible to disable KCOV instrumentation via a function attribute. The relevant function attribute was introduced in |
||
|
Nathan Chancellor
|
bbd2e05fad |
lib/Kconfig.debug: make TEST_KMOD depend on PAGE_SIZE_LESS_THAN_256KB
Commit |
||
|
Andrey Konovalov
|
e073e5ef90 |
lib/test_meminit: destroy cache in kmem_cache_alloc_bulk() test
Make do_kmem_cache_size_bulk() destroy the cache it creates.
Link: https://lkml.kernel.org/r/aced20a94bf04159a139f0846e41d38a1537debb.1640018297.git.andreyknvl@google.com
Fixes:
|
||
Isabella Basso
|
0acc968f35 |
test_hash.c: refactor into kunit
Use KUnit framework to make tests more easily integrable with CIs. Even though these tests are not yet properly written as unit tests this change should help in debugging. Also remove kernel messages (i.e. through pr_info) as KUnit handles all debugging output and let it handle module init and exit details. Link: https://lkml.kernel.org/r/20211208183711.390454-6-isabbasso@riseup.net Reviewed-by: David Gow <davidgow@google.com> Reported-by: kernel test robot <lkp@intel.com> Tested-by: David Gow <davidgow@google.com> Co-developed-by: Augusto Durães Camargo <augusto.duraes33@gmail.com> Signed-off-by: Augusto Durães Camargo <augusto.duraes33@gmail.com> Co-developed-by: Enzo Ferreira <ferreiraenzoa@gmail.com> Signed-off-by: Enzo Ferreira <ferreiraenzoa@gmail.com> Signed-off-by: Isabella Basso <isabbasso@riseup.net> Cc: Brendan Higgins <brendanhiggins@google.com> Cc: Daniel Latypov <dlatypov@google.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Rodrigo Siqueira <rodrigosiqueiramelo@gmail.com> Cc: Shuah Khan <skhan@linuxfoundation.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Isabella Basso
|
88168bf35c |
lib/Kconfig.debug: properly split hash test kernel entries
Split TEST_HASH so that each entry only has one file. Note that there's no stringhash test file, but actually <linux/stringhash.h> tests are performed in lib/test_hash.c. Link: https://lkml.kernel.org/r/20211208183711.390454-5-isabbasso@riseup.net Reviewed-by: David Gow <davidgow@google.com> Tested-by: David Gow <davidgow@google.com> Signed-off-by: Isabella Basso <isabbasso@riseup.net> Cc: Augusto Durães Camargo <augusto.duraes33@gmail.com> Cc: Brendan Higgins <brendanhiggins@google.com> Cc: Daniel Latypov <dlatypov@google.com> Cc: Enzo Ferreira <ferreiraenzoa@gmail.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: kernel test robot <lkp@intel.com> Cc: Rodrigo Siqueira <rodrigosiqueiramelo@gmail.com> Cc: Shuah Khan <skhan@linuxfoundation.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Isabella Basso
|
5427d3d772 |
test_hash.c: split test_hash_init
Split up test_hash_init so that it calls each test more explicitly insofar it is possible without rewriting the entire file. This aims at improving readability. Split tests performed on string_or as they don't interfere with those performed in hash_or. Also separate pr_info calls about skipped tests as they're not part of the tests themselves, but only warn about (un)defined arch-specific hash functions. Link: https://lkml.kernel.org/r/20211208183711.390454-4-isabbasso@riseup.net Reviewed-by: David Gow <davidgow@google.com> Tested-by: David Gow <davidgow@google.com> Signed-off-by: Isabella Basso <isabbasso@riseup.net> Cc: Augusto Durães Camargo <augusto.duraes33@gmail.com> Cc: Brendan Higgins <brendanhiggins@google.com> Cc: Daniel Latypov <dlatypov@google.com> Cc: Enzo Ferreira <ferreiraenzoa@gmail.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: kernel test robot <lkp@intel.com> Cc: Rodrigo Siqueira <rodrigosiqueiramelo@gmail.com> Cc: Shuah Khan <skhan@linuxfoundation.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Isabella Basso
|
ae7880676b |
test_hash.c: split test_int_hash into arch-specific functions
Split the test_int_hash function to keep its mainloop separate from arch-specific chunks, which are only compiled as needed. This aims at improving readability. Link: https://lkml.kernel.org/r/20211208183711.390454-3-isabbasso@riseup.net Reviewed-by: David Gow <davidgow@google.com> Tested-by: David Gow <davidgow@google.com> Signed-off-by: Isabella Basso <isabbasso@riseup.net> Cc: Augusto Durães Camargo <augusto.duraes33@gmail.com> Cc: Brendan Higgins <brendanhiggins@google.com> Cc: Daniel Latypov <dlatypov@google.com> Cc: Enzo Ferreira <ferreiraenzoa@gmail.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: kernel test robot <lkp@intel.com> Cc: Rodrigo Siqueira <rodrigosiqueiramelo@gmail.com> Cc: Shuah Khan <skhan@linuxfoundation.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Isabella Basso
|
fd0a146240 |
hash.h: remove unused define directive
Patch series "test_hash.c: refactor into KUnit", v3. We refactored the lib/test_hash.c file into KUnit as part of the student group LKCAMP [1] introductory hackathon for kernel development. This test was pointed to our group by Daniel Latypov [2], so its full conversion into a pure KUnit test was our goal in this patch series, but we ran into many problems relating to it not being split as unit tests, which complicated matters a bit, as the reasoning behind the original tests is quite cryptic for those unfamiliar with hash implementations. Some interesting developments we'd like to highlight are: - In patch 1/5 we noticed that there was an unused define directive that could be removed. - In patch 4/5 we noticed how stringhash and hash tests are all under the lib/test_hash.c file, which might cause some confusion, and we also broke those kernel config entries up. Overall KUnit developments have been made in the other patches in this series: In patches 2/5, 3/5 and 5/5 we refactored the lib/test_hash.c file so as to make it more compatible with the KUnit style, whilst preserving the original idea of the maintainer who designed it (i.e. George Spelvin), which might be undesirable for unit tests, but we assume it is enough for a first patch. This patch (of 5): Currently, there exist hash_32() and __hash_32() functions, which were introduced in a patch [1] targeting architecture specific optimizations. These functions can be overridden on a per-architecture basis to achieve such optimizations. They must set their corresponding define directive (HAVE_ARCH_HASH_32 and HAVE_ARCH__HASH_32, respectively) so that header files can deal with these overrides properly. As the supported 32-bit architectures that have their own hash function implementation (i.e. m68k, Microblaze, H8/300, pa-risc) have only been making use of the (more general) __hash_32() function (which only lacks a right shift operation when compared to the hash_32() function), remove the define directive corresponding to the arch-specific hash_32() implementation. [1] https://lore.kernel.org/lkml/20160525073311.5600.qmail@ns.sciencehorizons.net/ [akpm@linux-foundation.org: hash_32_generic() becomes hash_32()] Link: https://lkml.kernel.org/r/20211208183711.390454-1-isabbasso@riseup.net Link: https://lkml.kernel.org/r/20211208183711.390454-2-isabbasso@riseup.net Reviewed-by: David Gow <davidgow@google.com> Tested-by: David Gow <davidgow@google.com> Co-developed-by: Augusto Durães Camargo <augusto.duraes33@gmail.com> Signed-off-by: Augusto Durães Camargo <augusto.duraes33@gmail.com> Co-developed-by: Enzo Ferreira <ferreiraenzoa@gmail.com> Signed-off-by: Enzo Ferreira <ferreiraenzoa@gmail.com> Signed-off-by: Isabella Basso <isabbasso@riseup.net> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Brendan Higgins <brendanhiggins@google.com> Cc: Daniel Latypov <dlatypov@google.com> Cc: Shuah Khan <skhan@linuxfoundation.org> Cc: Rodrigo Siqueira <rodrigosiqueiramelo@gmail.com> Cc: kernel test robot <lkp@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
Zhen Lei
|
a31f9336ed |
lib/list_debug.c: print more list debugging context in __list_del_entry_valid()
Currently, the entry->prev and entry->next are considered to be valid as
long as they are not LIST_POISON{1|2}. However, the memory may be
corrupted. The prev->next is invalid probably because 'prev' is
invalid, not because prev->next's content is illegal.
Unfortunately, the printk and its subfunctions will modify the registers
that hold the 'prev' and 'next', and we don't see this valuable
information in the BUG context.
So print the contents of 'entry->prev' and 'entry->next'.
Here's an example:
list_del corruption. prev->next should be c0ecbf74, but was c08410dc
kernel BUG at lib/list_debug.c:53!
... ...
PC is at __list_del_entry_valid+0x58/0x98
LR is at __list_del_entry_valid+0x58/0x98
psr: 60000093
sp : c0ecbf30 ip : 00000000 fp : 00000001
r10: c08410d0 r9 : 00000001 r8 : c0825e0c
r7 : 20000013 r6 : c08410d0 r5 : c0ecbf74 r4 : c0ecbf74
r3 : c0825d08 r2 : 00000000 r1 : df7ce6f4 r0 : 00000044
... ...
Stack: (0xc0ecbf30 to 0xc0ecc000)
bf20: c0ecbf74 c0164fd0 c0ecbf70 c0165170
bf40: c0eca000 c0840c00 c0840c00 c0824500 c0825e0c c0189bbc c088f404 60000013
bf60: 60000013 c0e85100 000004ec 00000000 c0ebcdc0 c0ecbf74 c0ecbf74 c0825d08
bf80: c0e807c0 c018965c 00000000 c013f2a0 c0e807c0 c013f154 00000000 00000000
bfa0: 00000000 00000000 00000000 c01001b0 00000000 00000000 00000000 00000000
bfc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
bfe0: 00000000 00000000 00000000 00000000 00000013 00000000 00000000 00000000
(__list_del_entry_valid) from (__list_del_entry+0xc/0x20)
(__list_del_entry) from (finish_swait+0x60/0x7c)
(finish_swait) from (rcu_gp_kthread+0x560/0xa20)
(rcu_gp_kthread) from (kthread+0x14c/0x15c)
(kthread) from (ret_from_fork+0x14/0x24)
At first, I thought prev->next was overwritten. Later, I carefully
analyzed the RCU code and the disassembly code. The error occurred when
deleting a node from the list rcu_state.gp_wq. The System.map shows
that the address of rcu_state is c0840c00. Then I use gdb to obtain the
offset of rcu_state.gp_wq.task_list.
(gdb) p &((struct rcu_state *)0)->gp_wq.task_list
$1 = (struct list_head *) 0x4dc
Again:
list_del corruption. prev->next should be c0ecbf74, but was c08410dc
c08410dc = c0840c00 + 0x4dc = &rcu_state.gp_wq.task_list
Because rcu_state.gp_wq has at most one node, so I can guess that "prev
= &rcu_state.gp_wq.task_list". But for other scenes, maybe I wasn't so
lucky, I cannot figure out the value of 'prev'.
Link: https://lkml.kernel.org/r/20211207025835.1909-1-thunder.leizhen@huawei.com
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Cc: "Paul E . McKenney" <paulmck@linux.vnet.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
||
Alexey Dobriyan
|
70ac69928e |
kstrtox: uninline everything
I've made a mistake of looking into lib/kstrtox.o code generation. The only function remotely performance critical is _parse_integer() (via /proc/*/map_files/*), everything else is not. Uninline everything, shrink lib/kstrtox.o by ~20 % ! Space savings on x86_64: add/remove: 0/0 grow/shrink: 0/23 up/down: 0/-1269 (-1269 !!!) Function old new delta kstrtoull 16 13 -3 kstrtouint 59 48 -11 kstrtou8 60 49 -11 kstrtou16 61 50 -11 _kstrtoul 46 35 -11 kstrtoull_from_user 95 83 -12 kstrtoul_from_user 95 83 -12 kstrtoll 93 80 -13 kstrtouint_from_user 124 83 -41 kstrtou8_from_user 125 83 -42 kstrtou16_from_user 126 83 -43 kstrtos8 101 50 -51 kstrtos16 102 51 -51 kstrtoint 100 49 -51 _kstrtol 93 35 -58 kstrtobool_from_user 156 75 -81 kstrtoll_from_user 165 83 -82 kstrtol_from_user 165 83 -82 kstrtoint_from_user 172 83 -89 kstrtos8_from_user 173 83 -90 kstrtos16_from_user 174 83 -91 _parse_integer 136 10 -126 _kstrtoull 308 101 -207 Total: Before=3421236, After=3419967, chg -0.04% Link: https://lkml.kernel.org/r/YZDsFDhHst4m2Pnt@localhost.localdomain Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Andy Shevchenko
|
22c033989c |
include/linux/unaligned: replace kernel.h with the necessary inclusions
When kernel.h is used in the headers it adds a lot into dependency hell, especially when there are circular dependencies are involved. Replace kernel.h inclusion with the list of what is really being used. The rest of the changes are induced by the above and may not be split. Link: https://lkml.kernel.org/r/20211209123823.20425-1-andriy.shevchenko@linux.intel.com Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com> [brcmfmac] Acked-by: Kalle Valo <kvalo@kernel.org> Cc: Arend van Spriel <aspriel@gmail.com> Cc: Franky Lin <franky.lin@broadcom.com> Cc: Hante Meuleman <hante.meuleman@broadcom.com> Cc: Chi-hsien Lin <chi-hsien.lin@infineon.com> Cc: Wright Feng <wright.feng@infineon.com> Cc: Chung-hsien Hsu <chung-hsien.hsu@infineon.com> Cc: Kalle Valo <kvalo@codeaurora.org> Cc: David S. Miller <davem@davemloft.net> Cc: Jakub Kicinski <kuba@kernel.org> Cc: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Jason A. Donenfeld
|
9a1536b093 |
lib/crypto: sha1: re-roll loops to reduce code size
With SHA-1 no longer being used for anything performance oriented, and also soon to be phased out entirely, we can make up for the space added by unrolled BLAKE2s by simply re-rolling SHA-1. Since SHA-1 is so much more complex, re-rolling it more or less takes care of the code size added by BLAKE2s. And eventually, hopefully we'll see SHA-1 removed entirely from most small kernel builds. Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: Ard Biesheuvel <ardb@kernel.org> Tested-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> |
||
|
Jason A. Donenfeld
|
d8d83d8ab0 |
lib/crypto: blake2s: move hmac construction into wireguard
Basically nobody should use blake2s in an HMAC construction; it already has a keyed variant. But unfortunately for historical reasons, Noise, used by WireGuard, uses HKDF quite strictly, which means we have to use this. Because this really shouldn't be used by others, this commit moves it into wireguard's noise.c locally, so that kernels that aren't using WireGuard don't get this superfluous code baked in. On m68k systems, this shaves off ~314 bytes. Cc: Herbert Xu <herbert@gondor.apana.org.au> Tested-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> |
||
Justin M. Forbes
|
e56e189855 |
lib/crypto: add prompts back to crypto libraries
Commit |
||
|
Linus Torvalds
|
35ce8ae9ae |
Merge branch 'signal-for-v5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace
Pull signal/exit/ptrace updates from Eric Biederman:
"This set of changes deletes some dead code, makes a lot of cleanups
which hopefully make the code easier to follow, and fixes bugs found
along the way.
The end-game which I have not yet reached yet is for fatal signals
that generate coredumps to be short-circuit deliverable from
complete_signal, for force_siginfo_to_task not to require changing
userspace configured signal delivery state, and for the ptrace stops
to always happen in locations where we can guarantee on all
architectures that the all of the registers are saved and available on
the stack.
Removal of profile_task_ext, profile_munmap, and profile_handoff_task
are the big successes for dead code removal this round.
A bunch of small bug fixes are included, as most of the issues
reported were small enough that they would not affect bisection so I
simply added the fixes and did not fold the fixes into the changes
they were fixing.
There was a bug that broke coredumps piped to systemd-coredump. I
dropped the change that caused that bug and replaced it entirely with
something much more restrained. Unfortunately that required some
rebasing.
Some successes after this set of changes: There are few enough calls
to do_exit to audit in a reasonable amount of time. The lifetime of
struct kthread now matches the lifetime of struct task, and the
pointer to struct kthread is no longer stored in set_child_tid. The
flag SIGNAL_GROUP_COREDUMP is removed. The field group_exit_task is
removed. Issues where task->exit_code was examined with
signal->group_exit_code should been examined were fixed.
There are several loosely related changes included because I am
cleaning up and if I don't include them they will probably get lost.
The original postings of these changes can be found at:
https://lkml.kernel.org/r/87a6ha4zsd.fsf@email.froward.int.ebiederm.org
https://lkml.kernel.org/r/87bl1kunjj.fsf@email.froward.int.ebiederm.org
https://lkml.kernel.org/r/87r19opkx1.fsf_-_@email.froward.int.ebiederm.org
I trimmed back the last set of changes to only the obviously correct
once. Simply because there was less time for review than I had hoped"
* 'signal-for-v5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace: (44 commits)
ptrace/m68k: Stop open coding ptrace_report_syscall
ptrace: Remove unused regs argument from ptrace_report_syscall
ptrace: Remove second setting of PT_SEIZED in ptrace_attach
taskstats: Cleanup the use of task->exit_code
exit: Use the correct exit_code in /proc/<pid>/stat
exit: Fix the exit_code for wait_task_zombie
exit: Coredumps reach do_group_exit
exit: Remove profile_handoff_task
exit: Remove profile_task_exit & profile_munmap
signal: clean up kernel-doc comments
signal: Remove the helper signal_group_exit
signal: Rename group_exit_task group_exec_task
coredump: Stop setting signal->group_exit_task
signal: Remove SIGNAL_GROUP_COREDUMP
signal: During coredumps set SIGNAL_GROUP_EXIT in zap_process
signal: Make coredump handling explicit in complete_signal
signal: Have prepare_signal detect coredumps using signal->core_state
signal: Have the oom killer detect coredumps using signal->core_state
exit: Move force_uaccess back into do_exit
exit: Guarantee make_task_dead leaks the tsk when calling do_task_exit
...
|
||
|
Linus Torvalds
|
f56caedaf9 |
Merge branch 'akpm' (patches from Andrew)
Merge misc updates from Andrew Morton: "146 patches. Subsystems affected by this patch series: kthread, ia64, scripts, ntfs, squashfs, ocfs2, vfs, and mm (slab-generic, slab, kmemleak, dax, kasan, debug, pagecache, gup, shmem, frontswap, memremap, memcg, selftests, pagemap, dma, vmalloc, memory-failure, hugetlb, userfaultfd, vmscan, mempolicy, oom-kill, hugetlbfs, migration, thp, ksm, page-poison, percpu, rmap, zswap, zram, cleanups, hmm, and damon)" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (146 commits) mm/damon: hide kernel pointer from tracepoint event mm/damon/vaddr: hide kernel pointer from damon_va_three_regions() failure log mm/damon/vaddr: use pr_debug() for damon_va_three_regions() failure logging mm/damon/dbgfs: remove an unnecessary variable mm/damon: move the implementation of damon_insert_region to damon.h mm/damon: add access checking for hugetlb pages Docs/admin-guide/mm/damon/usage: update for schemes statistics mm/damon/dbgfs: support all DAMOS stats Docs/admin-guide/mm/damon/reclaim: document statistics parameters mm/damon/reclaim: provide reclamation statistics mm/damon/schemes: account how many times quota limit has exceeded mm/damon/schemes: account scheme actions that successfully applied mm/damon: remove a mistakenly added comment for a future feature Docs/admin-guide/mm/damon/usage: update for kdamond_pid and (mk|rm)_contexts Docs/admin-guide/mm/damon/usage: mention tracepoint at the beginning Docs/admin-guide/mm/damon/usage: remove redundant information Docs/admin-guide/mm/damon/usage: update for scheme quotas and watermarks mm/damon: convert macro functions to static inline functions mm/damon: modify damon_rand() macro to static inline function mm/damon: move damon_rand() definition into damon.h ... |
||
Yury Norov
|
15325b4f76 |
vsprintf: rework bitmap_list_string
bitmap_list_string() is very ineffective when printing bitmaps with long ranges of set bits because it calls find_next_bit for each bit in the bitmap. We can do better by detecting ranges of set bits. In my environment, before/after is 943008/31008 ns. Signed-off-by: Yury Norov <yury.norov@gmail.com> Tested-by: Wolfram Sang <wsa+renesas@sang-engineering.com> |
||
|
Yury Norov
|
db7313005e |
lib: bitmap: add performance test for bitmap_print_to_pagebuf
Functional tests for bitmap_print_to_pagebuf() are provided in lib/test_printf.c. This patch adds performance test for a case of fully set bitmap. Signed-off-by: Yury Norov <yury.norov@gmail.com> Tested-by: Wolfram Sang <wsa+renesas@sang-engineering.com> |
||
|
Yury Norov
|
b5c7e7ec7d |
all: replace find_next{,_zero}_bit with find_first{,_zero}_bit where appropriate
find_first{,_zero}_bit is a more effective analogue of 'next' version if
start == 0. This patch replaces 'next' with 'first' where things look
trivial.
Signed-off-by: Yury Norov <yury.norov@gmail.com>
Tested-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
|
||
|
Yury Norov
|
f68edc9297 |
lib: add find_first_and_bit()
Currently find_first_and_bit() is an alias to find_next_and_bit(). However, it is widely used in cpumask, so it worth to optimize it. This patch adds its own implementation for find_first_and_bit(). On x86_64 find_bit_benchmark says: Before (#define find_first_and_bit(...) find_next_and_bit(..., 0): Start testing find_bit() with random-filled bitmap [ 140.291468] find_first_and_bit: 46890919 ns, 32671 iterations Start testing find_bit() with sparse bitmap [ 140.295028] find_first_and_bit: 7103 ns, 1 iterations After: Start testing find_bit() with random-filled bitmap [ 162.574907] find_first_and_bit: 25045813 ns, 32846 iterations Start testing find_bit() with sparse bitmap [ 162.578458] find_first_and_bit: 4900 ns, 1 iterations (Thanks to Alexey Klimov for thorough testing.) Signed-off-by: Yury Norov <yury.norov@gmail.com> Tested-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Tested-by: Alexey Klimov <aklimov@redhat.com> |
||
|
Yury Norov
|
c126a53c27 |
arch: remove GENERIC_FIND_FIRST_BIT entirely
In 5.12 cycle we enabled GENERIC_FIND_FIRST_BIT config option for ARM64 and MIPS. It increased performance and shrunk .text size; and so far I didn't receive any negative feedback on the change. https://lore.kernel.org/linux-arch/20210225135700.1381396-1-yury.norov@gmail.com/ Now I think it's a good time to switch all architectures to use find_{first,last}_bit() unconditionally, and so remove corresponding config option. The patch does't introduce functioal changes for arc, arm, arm64, mips, m68k, s390 and x86, for other architectures I expect improvement both in performance and .text size. Signed-off-by: Yury Norov <yury.norov@gmail.com> Tested-by: Alexander Lobakin <alobakin@pm.me> (mips) Reviewed-by: Alexander Lobakin <alobakin@pm.me> (mips) Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Will Deacon <will@kernel.org> Tested-by: Wolfram Sang <wsa+renesas@sang-engineering.com> |
||
Alistair Popple
|
87c01d57fa |
mm/hmm.c: allow VM_MIXEDMAP to work with hmm_range_fault
hmm_range_fault() can be used instead of get_user_pages() for devices
which allow faulting however unlike get_user_pages() it will return an
error when used on a VM_MIXEDMAP range.
To make hmm_range_fault() more closely match get_user_pages() remove
this restriction. This requires dealing with the !ARCH_HAS_PTE_SPECIAL
case in hmm_vma_handle_pte(). Rather than replicating the logic of
vm_normal_page() call it directly and do a check for the zero pfn
similar to what get_user_pages() currently does.
Also add a test to hmm selftest to verify functionality.
Link: https://lkml.kernel.org/r/20211104012001.2555676-1-apopple@nvidia.com
Fixes:
|
||
|
Marco Elver
|
f98f966cd7 |
kasan: test: add test case for double-kmem_cache_destroy()
Add a test case for double-kmem_cache_destroy() detection. Link: https://lkml.kernel.org/r/20211119142219.1519617-2-elver@google.com Signed-off-by: Marco Elver <elver@google.com> Reviewed-by: Andrey Konovalov <andreyknvl@gmail.com> Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com> Cc: Alexander Potapenko <glider@google.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Christoph Lameter <cl@linux.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: David Rientjes <rientjes@google.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Marco Elver
|
e5f4728767 |
kasan: test: add globals left-out-of-bounds test
Add a test checking that KASAN generic can also detect out-of-bounds accesses to the left of globals. Unfortunately it seems that GCC doesn't catch this (tested GCC 10, 11). The main difference between GCC's globals redzoning and Clang's is that GCC relies on using increased alignment to producing padding, where Clang's redzoning implementation actually adds real data after the global and doesn't rely on alignment to produce padding. I believe this is the main reason why GCC can't reliably catch globals out-of-bounds in this case. Given this is now a known issue, to avoid failing the whole test suite, skip this test case with GCC. Link: https://lkml.kernel.org/r/20211117130714.135656-1-elver@google.com Signed-off-by: Marco Elver <elver@google.com> Reported-by: Kaiwan N Billimoria <kaiwan.billimoria@gmail.com> Reviewed-by: Andrey Konovalov <andreyknvl@gmail.com> Cc: Alexander Potapenko <glider@google.com> Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Kaiwan N Billimoria <kaiwan.billimoria@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Laibin Qiu
|
180dccb0db |
blk-mq: fix tag_get wait task can't be awakened
In case of shared tags, there might be more than one hctx which
allocates from the same tags, and each hctx is limited to allocate at
most:
hctx_max_depth = max((bt->sb.depth + users - 1) / users, 4U);
tag idle detection is lazy, and may be delayed for 30sec, so there
could be just one real active hctx(queue) but all others are actually
idle and still accounted as active because of the lazy idle detection.
Then if wake_batch is > hctx_max_depth, driver tag allocation may wait
forever on this real active hctx.
Fix this by recalculating wake_batch when inc or dec active_queues.
Fixes:
|
||
|
Linus Torvalds
|
6020c204be |
Convert much of the page cache to use folios
This patchset stops just short of actually enabling large folios. It converts everything that I noticed needs to be converted, but there may still be places I've overlooked which still have page size assumptions. The big change here is using large entries in the page cache XArray instead of many small entries. That only affects shmem for now, but it's a pretty big change for shmem since it changes where memory needs to be allocated (at split time instead of insertion). -----BEGIN PGP SIGNATURE----- iQEzBAABCgAdFiEEejHryeLBw/spnjHrDpNsjXcpgj4FAmHcraoACgkQDpNsjXcp gj7C3wgAl0cjtdVzTpkLmbnInsicW1m3thnbkSXYbpqRccFjpu2kEBGj31PT+oGz dzgXP7SNZ/VkFT+qWtmHSRF/J41B6f9bFojO81B2aQdpRiziU+5QbSbXbfUjwVhE GJF0WGSJtVqySKynXP/iYTEt2zj6BiVperAwIqzhZpPY7gNoyDgeRD34Xy5bQqdD ey6/Uwkh7oFHLEDcgxsEnyF0tUR3q+gpe5XZW1fb79p3crWw44xATc3UvKv8qCLC Rd4oHmKkOj4MvdiUxJEfXI+XxgrkQ8XRO70B+p6ZljhDaoDZYw7ullxA0gvlSpNX 6pnjSQlKA1VQXsi6PMSt+9vf26XxaQ== =KeYZ -----END PGP SIGNATURE----- Merge tag 'folio-5.17' of git://git.infradead.org/users/willy/pagecache Pull folio conversion updates from Matthew Wilcox: "Convert much of the page cache to use folios This stops just short of actually enabling large folios. It converts everything that I noticed needs to be converted, but there may still be places I've overlooked which still have page size assumptions. The big change here is using large entries in the page cache XArray instead of many small entries. That only affects shmem for now, but it's a pretty big change for shmem since it changes where memory needs to be allocated (at split time instead of insertion)" * tag 'folio-5.17' of git://git.infradead.org/users/willy/pagecache: (49 commits) mm: Use multi-index entries in the page cache XArray: Add xas_advance() truncate,shmem: Handle truncates that split large folios truncate: Convert invalidate_inode_pages2_range to folios fs: Convert vfs_dedupe_file_range_compare to folios mm: Remove pagevec_remove_exceptionals() mm: Convert find_lock_entries() to use a folio_batch filemap: Return only folios from find_get_entries() filemap: Convert filemap_get_read_batch() to use a folio_batch filemap: Convert filemap_read() to use a folio truncate: Add invalidate_complete_folio2() truncate: Convert invalidate_inode_pages2_range() to use a folio truncate: Skip known-truncated indices truncate,shmem: Add truncate_inode_folio() shmem: Convert part of shmem_undo_range() to use a folio mm: Add unmap_mapping_folio() truncate: Add truncate_cleanup_folio() filemap: Add filemap_release_folio() filemap: Use a folio in filemap_page_mkwrite filemap: Use a folio in filemap_map_pages ... |
||
|
Linus Torvalds
|
6dc69d3d0d |
driver core changes for 5.17-rc1
Here is the set of changes for the driver core for 5.17-rc1.
Lots of little things here, including:
- kobj_type cleanups
- auxiliary_bus documentation updates
- auxiliary_device conversions for some drivers (relevant
subsystems all have provided acks for these)
- kernfs lock contention reduction for some workloads
- other tiny cleanups and changes.
All of these have been in linux-next for a while with no reported
issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCYd7deA8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ym8ngCgw0ANwrRPE5b1dthEmfU2f8Knk5kAn0pHQv6R
VRZJypgNfU/Pt0ykstZD
=CO9J
-----END PGP SIGNATURE-----
Merge tag 'driver-core-5.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core updates from Greg KH:
"Here is the set of changes for the driver core for 5.17-rc1.
Lots of little things here, including:
- kobj_type cleanups
- auxiliary_bus documentation updates
- auxiliary_device conversions for some drivers (relevant subsystems
all have provided acks for these)
- kernfs lock contention reduction for some workloads
- other tiny cleanups and changes.
All of these have been in linux-next for a while with no reported
issues"
* tag 'driver-core-5.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (43 commits)
kobject documentation: remove default_attrs information
drivers/firmware: Add missing platform_device_put() in sysfb_create_simplefb
debugfs: lockdown: Allow reading debugfs files that are not world readable
driver core: Make bus notifiers in right order in really_probe()
driver core: Move driver_sysfs_remove() after driver_sysfs_add()
firmware: edd: remove empty default_attrs array
firmware: dmi-sysfs: use default_groups in kobj_type
qemu_fw_cfg: use default_groups in kobj_type
firmware: memmap: use default_groups in kobj_type
sh: sq: use default_groups in kobj_type
headers/uninline: Uninline single-use function: kobject_has_children()
devtmpfs: mount with noexec and nosuid
driver core: Simplify async probe test code by using ktime_ms_delta()
nilfs2: use default_groups in kobj_type
kobject: remove kset from struct kset_uevent_ops callbacks
driver core: make kobj_type constant.
driver core: platform: document registration-failure requirement
vdpa/mlx5: Use auxiliary_device driver data helpers
net/mlx5e: Use auxiliary_device driver data helpers
soundwire: intel: Use auxiliary_device driver data helpers
...
|
||
|
Linus Torvalds
|
e3084ed48f |
Pin control bulk changes for the v5.17 kernel cycle
Core changes:
- New standard enumerator and corresponding device tree bindings
for output impedance pin configuration. (Implemented and used
in the Renesas rzg2l driver.)
- Cleanup of Kconfig and Makefile to be somewhat orderly and
alphabetic.
New drivers:
- Samsung Exynos 7885 pin controller.
- Ocelot LAN966x pin controller.
- Qualcomm SDX65 pin controller.
- Qualcomm SM8450 pin controller.
- Qualcomm PM8019, PM8226 and PM2250 pin controllers.
- NXP/Freescale i.MXRT1050 pin controller.
- Intel Thunder Bay pin controller.
Enhancements:
- Introduction of the string library helper function
"kasprintf_strarray()" and subsequent use in Rockchip, ST and
Armada pin control drivers, as well as the GPIO mockup driver.
- The Ocelot pin controller has been extensively rewritten to
use regmap and other modern kernel infrastructure.
- The Microchip SGPIO driver has been converted to use regmap.
- The SPEAr driver had been converted to use regmap.
- Substantial cleanups and janitorial on the Apple pin control
driver that was merged for v5.16.
- Janitorial to remove of_node assignments in the GPIO portions
that anyway get this handled in the GPIO core.
- Minor cleanups and improvements in several pin controllers.
-----BEGIN PGP SIGNATURE-----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=+nxh
-----END PGP SIGNATURE-----
Merge tag 'pinctrl-v5.17-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl
Pull pin control bulk updates from Linus Walleij:
"Core changes:
- New standard enumerator and corresponding device tree bindings for
output impedance pin configuration. (Implemented and used in the
Renesas rzg2l driver.)
- Cleanup of Kconfig and Makefile to be somewhat orderly and
alphabetic.
New drivers:
- Samsung Exynos 7885 pin controller.
- Ocelot LAN966x pin controller.
- Qualcomm SDX65 pin controller.
- Qualcomm SM8450 pin controller.
- Qualcomm PM8019, PM8226 and PM2250 pin controllers.
- NXP/Freescale i.MXRT1050 pin controller.
- Intel Thunder Bay pin controller.
Enhancements:
- Introduction of the string library helper function
"kasprintf_strarray()" and subsequent use in Rockchip, ST and
Armada pin control drivers, as well as the GPIO mockup driver.
- The Ocelot pin controller has been extensively rewritten to use
regmap and other modern kernel infrastructure.
- The Microchip SGPIO driver has been converted to use regmap.
- The SPEAr driver had been converted to use regmap.
- Substantial cleanups and janitorial on the Apple pin control driver
that was merged for v5.16.
- Janitorial to remove of_node assignments in the GPIO portions that
anyway get this handled in the GPIO core.
- Minor cleanups and improvements in several pin controllers"
* tag 'pinctrl-v5.17-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (98 commits)
pinctrl: imx: fix assigning groups names
dt-bindings: pinctrl: mt8195: add wrapping node of pin configurations
pinctrl: bcm: ns: use generic groups & functions helpers
pinctrl: imx: fix allocation result check
pinctrl: samsung: Use platform_get_irq_optional() to get the interrupt
pinctrl: Propagate firmware node from a parent device
dt-bindings: pinctrl: qcom: Add SDX65 pinctrl bindings
pinctrl: add one more "const" for generic function groups
pinctrl: keembay: rework loops looking for groups names
pinctrl: keembay: comment process of building functions a bit
pinctrl: imx: prepare for making "group_names" in "function_desc" const
ARM: dts: gpio-ranges property is now required
pinctrl: aspeed: fix unmet dependencies on MFD_SYSCON for PINCTRL_ASPEED
pinctrl: Get rid of duplicate of_node assignment in the drivers
pinctrl-sunxi: don't call pinctrl_gpio_direction()
pinctrl-bcm2835: don't call pinctrl_gpio_direction()
pinctrl: bcm2835: Silence uninit warning
pinctrl: Sort Kconfig and Makefile entries alphabetically
pinctrl: Add Intel Thunder Bay pinctrl driver
dt-bindings: pinctrl: Add bindings for Intel Thunderbay pinctrl driver
...
|
||
|
Linus Torvalds
|
c9193f48e9 |
for-5.17/drivers-2022-01-11
-----BEGIN PGP SIGNATURE-----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=k0IZ
-----END PGP SIGNATURE-----
Merge tag 'for-5.17/drivers-2022-01-11' of git://git.kernel.dk/linux-block
Pull block driver updates from Jens Axboe:
- mtip32xx pci cleanups (Bjorn)
- mtip32xx conversion to generic power management (Vaibhav)
- rsxx pci powermanagement cleanups (Bjorn)
- Remove the rsxx driver. This hardware never saw much adoption, and
it's been end of lifed for a while. (Christoph)
- MD pull request from Song:
- REQ_NOWAIT support (Vishal Verma)
- raid6 benchmark optimization (Dirk Müller)
- Fix for acct bioset (Xiao Ni)
- Clean up max_queued_requests (Mariusz Tkaczyk)
- PREEMPT_RT optimization (Davidlohr Bueso)
- Use default_groups in kobj_type (Greg Kroah-Hartman)
- Use attribute groups in pktcdvd and rnbd (Greg)
- NVMe pull request from Christoph:
- increment request genctr on completion (Keith Busch, Geliang
Tang)
- add a 'iopolicy' module parameter (Hannes Reinecke)
- print out valid arguments when reading from /dev/nvme-fabrics
(Hannes Reinecke)
- Use struct_group() in drbd (Kees)
- null_blk fixes (Ming)
- Get rid of congestion logic in pktcdvd (Neil)
- Floppy ejection hang fix (Tasos)
- Floppy max user request size fix (Xiongwei)
- Loop locking fix (Tetsuo)
* tag 'for-5.17/drivers-2022-01-11' of git://git.kernel.dk/linux-block: (32 commits)
md: use default_groups in kobj_type
md: Move alloc/free acct bioset in to personality
lib/raid6: Use strict priority ranking for pq gen() benchmarking
lib/raid6: skip benchmark of non-chosen xor_syndrome functions
md: fix spelling of "its"
md: raid456 add nowait support
md: raid10 add nowait support
md: raid1 add nowait support
md: add support for REQ_NOWAIT
md: drop queue limitation for RAID1 and RAID10
md/raid5: play nice with PREEMPT_RT
block/rnbd-clt-sysfs: use default_groups in kobj_type
pktcdvd: convert to use attribute groups
block: null_blk: only set set->nr_maps as 3 if active poll_queues is > 0
nvme: add 'iopolicy' module parameter
nvme: drop unused variable ctrl in nvme_setup_cmd
nvme: increment request genctr on completion
nvme-fabrics: print out valid arguments when reading from /dev/nvme-fabrics
block: remove the rsxx driver
rsxx: Drop PCI legacy power management
...
|
||
|
Eric Dumazet
|
c12837d1bb |
ref_tracker: use __GFP_NOFAIL more carefully
syzbot was able to trigger this warning from new_slab()
/*
* All existing users of the __GFP_NOFAIL are blockable, so warn
* of any new users that actually require GFP_NOWAIT
*/
if (WARN_ON_ONCE(!can_direct_reclaim))
goto fail;
Indeed, we should use __GFP_NOFAIL if direct reclaim is possible.
Hopefully in the future we will be able to use SLAB_NOFAILSLAB
option so that syzbot can benefit from full ref_tracker
even in the presence of memory fault injections.
WARNING: CPU: 0 PID: 13 at mm/page_alloc.c:5081 __alloc_pages_slowpath.constprop.0+0x1b7b/0x20d0 mm/page_alloc.c:5081 mm/page_alloc.c:5081
Modules linked in:
CPU: 0 PID: 13 Comm: ksoftirqd/0 Not tainted 5.16.0-rc5-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
RIP: 0010:__alloc_pages_slowpath.constprop.0+0x1b7b/0x20d0 mm/page_alloc.c:5081 mm/page_alloc.c:5081
Code: 90 08 00 00 48 81 c7 d8 04 00 00 48 89 f8 48 c1 e8 03 42 80 3c 30 00 0f 84 f0 ea ff ff e8 3d 82 09 00 e9 e6 ea ff ff 4d 89 fd <0f> 0b 48 b8 00 00 00 00 00 fc ff df 48 8b 54 24 30 48 c1 ea 03 80
RSP: 0018:ffffc90000d272b8 EFLAGS: 00010246
RAX: 0000000000000000 RBX: ffff88813fffc300 RCX: 0000000000000000
RDX: 0000000000000000 RSI: 0000000000000002 RDI: ffff88813fffc348
RBP: ffff88813fffc300 R08: 00000000000013dc R09: 00000000000013c8
R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000000
R13: ffffc90000d274e8 R14: dffffc0000000000 R15: ffffc90000d274e8
FS: 0000000000000000(0000) GS:ffff8880b9c00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007ffefe6000f8 CR3: 000000001d21e000 CR4: 00000000003506f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
__alloc_pages+0x412/0x500 mm/page_alloc.c:5382 mm/page_alloc.c:5382
alloc_pages+0x1a7/0x300 mm/mempolicy.c:2191 mm/mempolicy.c:2191
alloc_slab_page mm/slub.c:1793 [inline]
allocate_slab mm/slub.c:1938 [inline]
alloc_slab_page mm/slub.c:1793 [inline] mm/slub.c:1993
allocate_slab mm/slub.c:1938 [inline] mm/slub.c:1993
new_slab+0x349/0x4a0 mm/slub.c:1993 mm/slub.c:1993
___slab_alloc+0x918/0xfe0 mm/slub.c:3022 mm/slub.c:3022
__slab_alloc.constprop.0+0x4d/0xa0 mm/slub.c:3109 mm/slub.c:3109
slab_alloc_node mm/slub.c:3200 [inline]
slab_alloc mm/slub.c:3242 [inline]
slab_alloc_node mm/slub.c:3200 [inline] mm/slub.c:3259
slab_alloc mm/slub.c:3242 [inline] mm/slub.c:3259
kmem_cache_alloc_trace+0x289/0x2c0 mm/slub.c:3259 mm/slub.c:3259
kmalloc include/linux/slab.h:590 [inline]
kzalloc include/linux/slab.h:724 [inline]
kmalloc include/linux/slab.h:590 [inline] lib/ref_tracker.c:74
kzalloc include/linux/slab.h:724 [inline] lib/ref_tracker.c:74
ref_tracker_alloc+0xe1/0x430 lib/ref_tracker.c:74 lib/ref_tracker.c:74
netdev_tracker_alloc include/linux/netdevice.h:3855 [inline]
dev_hold_track include/linux/netdevice.h:3872 [inline]
netdev_tracker_alloc include/linux/netdevice.h:3855 [inline] net/core/dst.c:52
dev_hold_track include/linux/netdevice.h:3872 [inline] net/core/dst.c:52
dst_init+0xe0/0x520 net/core/dst.c:52 net/core/dst.c:52
dst_alloc+0x16b/0x1f0 net/core/dst.c:96 net/core/dst.c:96
rt_dst_alloc+0x73/0x450 net/ipv4/route.c:1614 net/ipv4/route.c:1614
ip_route_input_mc net/ipv4/route.c:1720 [inline]
ip_route_input_mc net/ipv4/route.c:1720 [inline] net/ipv4/route.c:2465
ip_route_input_rcu.part.0+0x4fe/0xcc0 net/ipv4/route.c:2465 net/ipv4/route.c:2465
ip_route_input_rcu net/ipv4/route.c:2420 [inline]
ip_route_input_rcu net/ipv4/route.c:2420 [inline] net/ipv4/route.c:2416
ip_route_input_noref+0x1b8/0x2a0 net/ipv4/route.c:2416 net/ipv4/route.c:2416
ip_rcv_finish_core.constprop.0+0x288/0x1e90 net/ipv4/ip_input.c:354 net/ipv4/ip_input.c:354
ip_rcv_finish+0x135/0x2f0 net/ipv4/ip_input.c:427 net/ipv4/ip_input.c:427
NF_HOOK include/linux/netfilter.h:307 [inline]
NF_HOOK include/linux/netfilter.h:301 [inline]
NF_HOOK include/linux/netfilter.h:307 [inline] net/ipv4/ip_input.c:540
NF_HOOK include/linux/netfilter.h:301 [inline] net/ipv4/ip_input.c:540
ip_rcv+0xaa/0xd0 net/ipv4/ip_input.c:540 net/ipv4/ip_input.c:540
__netif_receive_skb_one_core+0x114/0x180 net/core/dev.c:5350 net/core/dev.c:5350
__netif_receive_skb+0x24/0x1b0 net/core/dev.c:5464 net/core/dev.c:5464
process_backlog+0x2a5/0x6c0 net/core/dev.c:5796 net/core/dev.c:5796
__napi_poll+0xaf/0x440 net/core/dev.c:6364 net/core/dev.c:6364
napi_poll net/core/dev.c:6431 [inline]
napi_poll net/core/dev.c:6431 [inline] net/core/dev.c:6518
net_rx_action+0x801/0xb40 net/core/dev.c:6518 net/core/dev.c:6518
__do_softirq+0x29b/0x9c2 kernel/softirq.c:558 kernel/softirq.c:558
run_ksoftirqd kernel/softirq.c:921 [inline]
run_ksoftirqd kernel/softirq.c:921 [inline] kernel/softirq.c:913
run_ksoftirqd+0x2d/0x60 kernel/softirq.c:913 kernel/softirq.c:913
smpboot_thread_fn+0x645/0x9c0 kernel/smpboot.c:164 kernel/smpboot.c:164
kthread+0x405/0x4f0 kernel/kthread.c:327 kernel/kthread.c:327
ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:295 arch/x86/entry/entry_64.S:295
Fixes:
|
||
|
Linus Torvalds
|
daadb3bd0e |
Peter Zijlstra says:
"Lots of cleanups and preparation; highlights:
- futex: Cleanup and remove runtime futex_cmpxchg detection
- rtmutex: Some fixes for the PREEMPT_RT locking infrastructure
- kcsan: Share owner_on_cpu() between mutex,rtmutex and rwsem and
annotate the racy owner->on_cpu access *once*.
- atomic64: Dead-Code-Elemination"
-----BEGIN PGP SIGNATURE-----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=vrYy
-----END PGP SIGNATURE-----
Merge tag 'locking_core_for_v5.17_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull locking updates from Borislav Petkov:
"Lots of cleanups and preparation. Highlights:
- futex: Cleanup and remove runtime futex_cmpxchg detection
- rtmutex: Some fixes for the PREEMPT_RT locking infrastructure
- kcsan: Share owner_on_cpu() between mutex,rtmutex and rwsem and
annotate the racy owner->on_cpu access *once*.
- atomic64: Dead-Code-Elemination"
[ Description above by Peter Zijlstra ]
* tag 'locking_core_for_v5.17_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
locking/atomic: atomic64: Remove unusable atomic ops
futex: Fix additional regressions
locking: Allow to include asm/spinlock_types.h from linux/spinlock_types_raw.h
x86/mm: Include spinlock_t definition in pgtable.
locking: Mark racy reads of owner->on_cpu
locking: Make owner_on_cpu() into <linux/sched.h>
lockdep/selftests: Adapt ww-tests for PREEMPT_RT
lockdep/selftests: Skip the softirq related tests on PREEMPT_RT
lockdep/selftests: Unbalanced migrate_disable() & rcu_read_lock().
lockdep/selftests: Avoid using local_lock_{acquire|release}().
lockdep: Remove softirq accounting on PREEMPT_RT.
locking/rtmutex: Add rt_mutex_lock_nest_lock() and rt_mutex_lock_killable().
locking/rtmutex: Squash self-deadlock check for ww_rt_mutex.
locking: Remove rt_rwlock_is_contended().
sched: Trigger warning if ->migration_disabled counter underflows.
futex: Fix sparc32/m68k/nds32 build regression
futex: Remove futex_cmpxchg detection
futex: Ensure futex_atomic_cmpxchg_inatomic() is present
kernel/locking: Use a pointer in ww_mutex_trylock().
|
||
|
Linus Torvalds
|
f692121142 |
This pull request contains the following changes for UML:
- set_fs removal - Devicetree support - Many cleanups from Al - Various virtio and build related fixes -----BEGIN PGP SIGNATURE----- iQJKBAABCAA0FiEEdgfidid8lnn52cLTZvlZhesYu8EFAmHbPpwWHHJpY2hhcmRA c2lnbWEtc3Rhci5hdAAKCRBm+VmF6xi7wXkcD/9UfDRFqvgtZIlacQ/0IvN24xeq +f4aXoXEVyVsCd02jv9pUk3IAezIQyJf3MGtNJ4D/UFXtYfjEYjK5kJpPDP6umaZ ZDnpTzn29HW2aGlgOxW9gU7a3Yze629QasIRP6x7Ht+Hk5eXrvRYrgcmKtw1mm04 SA5v5ZqP3P5r623fpsFiw4Dvl7l6MhDyFeyA2tabNnmv93HgB76PHDtV2Z+SWrC+ ubjlfBQc87QGHW+eTvce+0qw9APMoJpNFjNN4H8P/9VcDTvw+KL2JqQ02HSMWh4z HeHKsv6hbty+GskBhbaWDW7867fPJ3e08TFAAAjeEiBP/CDBwjOTSr3eOw1eHgzU xdAqC2Bz0e5G3shClmVEzzvcP6R2cgNZjeBze5m3wQ1NKHEddk6N9t5K+4NrOpgp gbNN5Q4FAVOBKeQsZWG81bJKGcu7SbShgiKjlxcaRpMyp6LwyD4naauGjmCzYsbf Pd4ilLO1Yocf7nFs2C4vWxE4iAZ6hfQtukerIxCQfb/Y2BaWT3bcWWYHFRFy6Lq+ hTFGnjf+Ro65QCoa1idaLaUdhwAGi6U9sjjL6G/JdQCCE3ftcXLVA9TJz9CNdMb5 98IGznxhczOZc7rHNXOF4km5+OUrU6N+C0WRp3yOoUWcI+Ms4PXHzqIwC5cde/V7 O/o9O1BAoBP6LE1pPg== =5J6E -----END PGP SIGNATURE----- Merge tag 'for-linus-5.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/uml Pull UML updates from Richard Weinberger: - set_fs removal - Devicetree support - Many cleanups from Al - Various virtio and build related fixes * tag 'for-linus-5.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/uml: (31 commits) um: virtio_uml: Allow probing from devicetree um: Add devicetree support um: Extract load file helper from initrd.c um: remove set_fs hostfs: Fix writeback of dirty pages um: Use swap() to make code cleaner um: header debriding - sigio.h um: header debriding - os.h um: header debriding - net_*.h um: header debriding - mem_user.h um: header debriding - activate_ipi() um: common-offsets.h debriding... um, x86: bury crypto_tfm_ctx_offset um: unexport handle_page_fault() um: remove a dangling extern of syscall_trace() um: kill unused cpu() uml/i386: missing include in barrier.h um: stop polluting the namespace with registers.h contents logic_io instance of iounmap() needs volatile on argument um: move amd64 variant of mmap(2) to arch/x86/um/syscalls_64.c ... |
||
|
Linus Torvalds
|
dabd40ecaf |
tpmdd updates for Linux v5.17
-----BEGIN PGP SIGNATURE----- iIgEABYIADAWIQRE6pSOnaBC00OEHEIaerohdGur0gUCYdzf7hIcamFya2tvQGtl cm5lbC5vcmcACgkQGnq6IXRrq9IA/AEA2sX9fNNYSYnUwvi/Ju+Y8BgW4pA+GvA0 L8iSuUkWdssA/iQFdQ3vyDK0CI56G1jerKMyT7o8QEuJmUYogTRV7+oA =7q7g -----END PGP SIGNATURE----- Merge tag 'tpmdd-next-v5.17-fixed' of git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd Pull TPM updates from Jarkko Sakkinen: "Other than bug fixes for TPM, this includes a patch for asymmetric keys to allow to look up and verify with self-signed certificates (keys without so called AKID - Authority Key Identifier) using a new "dn:" prefix in the query" * tag 'tpmdd-next-v5.17-fixed' of git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd: lib: remove redundant assignment to variable ret tpm: fix NPE on probe for missing device tpm: fix potential NULL pointer access in tpm_del_char_device tpm: Add Upgrade/Reduced mode support for TPM2 modules char: tpm: cr50: Set TPM_FIRMWARE_POWER_MANAGED based on device property keys: X.509 public key issuer lookup without AKID tpm_tis: Fix an error handling path in 'tpm_tis_core_init()' tpm: tpm_tis_spi_cr50: Add default RNG quality tpm/st33zp24: drop unneeded over-commenting tpm: add request_locality before write TPM_INT_ENABLE |
||
|
Linus Torvalds
|
5c947d0dba |
Merge branch 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto updates from Herbert Xu: "Algorithms: - Drop alignment requirement for data in aesni - Use synchronous seeding from the /dev/random in DRBG - Reseed nopr DRBGs every 5 minutes from /dev/random - Add KDF algorithms currently used by security/DH - Fix lack of entropy on some AMD CPUs with jitter RNG Drivers: - Add support for the D1 variant in sun8i-ce - Add SEV_INIT_EX support in ccp - PFVF support for GEN4 host driver in qat - Compression support for GEN4 devices in qat - Add cn10k random number generator support" * 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (145 commits) crypto: af_alg - rewrite NULL pointer check lib/mpi: Add the return value check of kcalloc() crypto: qat - fix definition of ring reset results crypto: hisilicon - cleanup warning in qm_get_qos_value() crypto: kdf - select SHA-256 required for self-test crypto: x86/aesni - don't require alignment of data crypto: ccp - remove unneeded semicolon crypto: stm32/crc32 - Fix kernel BUG triggered in probe() crypto: s390/sha512 - Use macros instead of direct IV numbers crypto: sparc/sha - remove duplicate hash init function crypto: powerpc/sha - remove duplicate hash init function crypto: mips/sha - remove duplicate hash init function crypto: sha256 - remove duplicate generic hash init function crypto: jitter - add oversampling of noise source MAINTAINERS: update SEC2 driver maintainers list crypto: ux500 - Use platform_get_irq() to get the interrupt crypto: hisilicon/qm - disable qm clock-gating crypto: omap-aes - Fix broken pm_runtime_and_get() usage MAINTAINERS: update caam crypto driver maintainers list crypto: octeontx2 - prevent underflow in get_cores_bmap() ... |
||
|
Linus Torvalds
|
1be5bdf8cd |
KCSAN updates for v5.17
This series provides KCSAN fixes and also the ability to take memory barriers into account for weakly-ordered systems. This last can increase the probability of detecting certain types of data races. -----BEGIN PGP SIGNATURE----- iQJHBAABCgAxFiEEbK7UrM+RBIrCoViJnr8S83LZ+4wFAmHbuRwTHHBhdWxtY2tA a2VybmVsLm9yZwAKCRCevxLzctn7jKDPEACWuzYnd/u/02AHyRd3PIF3Px9uFKlK TFwaXX95oYSFCXcrmO42YtDUlZm4QcbwNb85KMCu1DvckRtIsNw0rkBU7BGyqv3Z ZoJEfMNpmC0x9+IFBOeseBHySPVT0x7GmYus05MSh0OLfkbCfyImmxRzgoKJGL+A ADF9EQb4z2feWjmVEoN8uRaarCAD4f77rSXiX6oTCNDuKrHarqMld/TmoXFrJbu2 QtfwHeyvraKBnZdUoYfVbGVenyKb1vMv4bUlvrOcuJEgIi/J/th4FupR3XCGYulI aWJTl2TQTGnMoE8VnFHgI27I841w3k5PVL+Y1hr/S4uN1/rIoQQuBzCtlnFeCksa BiBXsHIchN8N0Dwh8zD8NMd2uxV4t3fmpxXTDAwaOm7vs5hA8AJ0XNu6Sz94Lyjv wk2CxX41WWUNJVo3gh6SrS4mL6lC8+VvHF1hbIap++jrevj58gj1jAR1fdx4ANlT e2qA00EeoMngEogDNZH42/Fxs3H9zxrBta2ZbkPkwzIqTHH+4pIQDCy2xO3T3oxc twdGPYpjYdkf79EGsG4I4R/VA/IfcS09VIWTce8xSDeSnqkgFhcG37r1orJe8hTB tH+ODkNOsz5HaEoa8OoAL4ko2l0fL99p2AtMPpuQfHjRj7aorF+dJIrqCizASxwx 37PjQgOmHeDHgQ== =Q5fg -----END PGP SIGNATURE----- Merge tag 'kcsan.2022.01.09a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu Pull KCSAN updates from Paul McKenney: "This provides KCSAN fixes and also the ability to take memory barriers into account for weakly-ordered systems. This last can increase the probability of detecting certain types of data races" * tag 'kcsan.2022.01.09a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu: (29 commits) kcsan: Only test clear_bit_unlock_is_negative_byte if arch defines it kcsan: Avoid nested contexts reading inconsistent reorder_access kcsan: Turn barrier instrumentation into macros kcsan: Make barrier tests compatible with lockdep kcsan: Support WEAK_MEMORY with Clang where no objtool support exists compiler_attributes.h: Add __disable_sanitizer_instrumentation objtool, kcsan: Remove memory barrier instrumentation from noinstr objtool, kcsan: Add memory barrier instrumentation to whitelist sched, kcsan: Enable memory barrier instrumentation mm, kcsan: Enable barrier instrumentation x86/qspinlock, kcsan: Instrument barrier of pv_queued_spin_unlock() x86/barriers, kcsan: Use generic instrumentation for non-smp barriers asm-generic/bitops, kcsan: Add instrumentation for barriers locking/atomics, kcsan: Add instrumentation for barriers locking/barriers, kcsan: Support generic instrumentation locking/barriers, kcsan: Add instrumentation for barriers kcsan: selftest: Add test case to check memory barrier instrumentation kcsan: Ignore GCC 11+ warnings about TSan runtime support kcsan: test: Add test cases for memory barrier instrumentation kcsan: test: Match reordered or normal accesses ... |
||
|
Linus Torvalds
|
a229327733 |
printk changes for 5.17
-----BEGIN PGP SIGNATURE----- iQIzBAABCAAdFiEESH4wyp42V4tXvYsjUqAMR0iAlPIFAmHcFXQACgkQUqAMR0iA lPIYCw/7BbaC04tqwwznlL97rDW5LpbxJp/9bheJ3tE9mjsIVm2ExU/RLwXaeAhM K+aT0FB9s6u03OXOV3Dc2aFzwTXUamhHwgjp4uPs3+Colin1zGW1GMNTaSxGVm8Y zJfdrasjhJeucxNda+VtuGBkKwzs3dZjlNOUi1RzhJNGJvQtLDAZp04P9gAv6RDD gA/59YOx1q8m/Mig04PVWzKwiRl/zQLgGaXrgMYID2VrR2d/ZXSVY+itpq1GVOr7 JWycMveIhAle8aoupbacfZofX5vHShaigfkJRI6MtVHBq7dVyfpTWElqdnjOJaZy AxwyTbcm0USfCK2K1Yl3L6TcU1DMaryGWJpJH/HvlR7yqEa8RVIeP2rLIlBTNHlP Caouz0Hrvy1pbLsdd39NXZohnY50DWgml4I0wwhf03IaVU9XaGtdAaKdXL45NefI ghHTNLCO9e4X1/lQT39EJp33/nZmSoN5vr6+0PQqlWXNgcUbMUAnA/K01jl3NKXP fBcb7WigIW0CEReMqB7WyJ42at0uk8Px4JEuYGmxpDSQIj+HqaQAiruUjEP9tQ6K b+LwRKgE7c2eNsHMBPNQ7txjen7rN6D8tVUEgF3Vp45uCm/wdp2kIZ27nOYWYRt3 BVY/6GOIQZ7wJQPztIIaYfd1+3m9DIoq6YsqYniknz88oU4KN5k= =k1A+ -----END PGP SIGNATURE----- Merge tag 'printk-for-5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux Pull printk updates from Petr Mladek: - Remove some twists in the console registration code. It does not change the existing behavior except for one corner case. The proper default console (with tty binding) will be registered again even when it has been removed in the meantime. It is actually a bug fix. Anyway, this modified behavior requires some manual interaction. - Optimize gdb extension for huge ring buffers. - Do not use atomic operations for a local bitmap variable. - Update git links in MAINTAINERS. * tag 'printk-for-5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux: MAINTAIERS/printk: Add link to printk git MAINTAINERS/vsprintf: Update link to printk git tree scripts/gdb: lx-dmesg: read records individually printk/console: Clean up boot console handling in register_console() printk/console: Remove need_default_console variable printk/console: Remove unnecessary need_default_console manipulation printk/console: Rename has_preferred_console to need_default_console printk/console: Split out code that enables default console vsprintf: Use non-atomic bitmap API when applicable |
||
|
Linus Torvalds
|
8efd0d9c31 |
Networking changes for 5.17.
Core
----
- Defer freeing TCP skbs to the BH handler, whenever possible,
or at least perform the freeing outside of the socket lock section
to decrease cross-CPU allocator work and improve latency.
- Add netdevice refcount tracking to locate sources of netdevice
and net namespace refcount leaks.
- Make Tx watchdog less intrusive - avoid pausing Tx and restarting
all queues from a single CPU removing latency spikes.
- Various small optimizations throughout the stack from Eric Dumazet.
- Make netdev->dev_addr[] constant, force modifications to go via
appropriate helpers to allow us to keep addresses in ordered data
structures.
- Replace unix_table_lock with per-hash locks, improving performance
of bind() calls.
- Extend skb drop tracepoint with a drop reason.
- Allow SO_MARK and SO_PRIORITY setsockopt under CAP_NET_RAW.
BPF
---
- New helpers:
- bpf_find_vma(), find and inspect VMAs for profiling use cases
- bpf_loop(), runtime-bounded loop helper trading some execution
time for much faster (if at all converging) verification
- bpf_strncmp(), improve performance, avoid compiler flakiness
- bpf_get_func_arg(), bpf_get_func_ret(), bpf_get_func_arg_cnt()
for tracing programs, all inlined by the verifier
- Support BPF relocations (CO-RE) in the kernel loader.
- Further the support for BTF_TYPE_TAG annotations.
- Allow access to local storage in sleepable helpers.
- Convert verifier argument types to a composable form with different
attributes which can be shared across types (ro, maybe-null).
- Prepare libbpf for upcoming v1.0 release by cleaning up APIs,
creating new, extensible ones where missing and deprecating those
to be removed.
Protocols
---------
- WiFi (mac80211/cfg80211):
- notify user space about long "come back in N" AP responses,
allow it to react to such temporary rejections
- allow non-standard VHT MCS 10/11 rates
- use coarse time in airtime fairness code to save CPU cycles
- Bluetooth:
- rework of HCI command execution serialization to use a common
queue and work struct, and improve handling errors reported
in the middle of a batch of commands
- rework HCI event handling to use skb_pull_data, avoiding packet
parsing pitfalls
- support AOSP Bluetooth Quality Report
- SMC:
- support net namespaces, following the RDMA model
- improve connection establishment latency by pre-clearing buffers
- introduce TCP ULP for automatic redirection to SMC
- Multi-Path TCP:
- support ioctls: SIOCINQ, OUTQ, and OUTQNSD
- support socket options: IP_TOS, IP_FREEBIND, IP_TRANSPARENT,
IPV6_FREEBIND, and IPV6_TRANSPARENT, TCP_CORK and TCP_NODELAY
- support cmsgs: TCP_INQ
- improvements in the data scheduler (assigning data to subflows)
- support fastclose option (quick shutdown of the full MPTCP
connection, similar to TCP RST in regular TCP)
- MCTP (Management Component Transport) over serial, as defined by
DMTF spec DSP0253 - "MCTP Serial Transport Binding".
Driver API
----------
- Support timestamping on bond interfaces in active/passive mode.
- Introduce generic phylink link mode validation for drivers which
don't have any quirks and where MAC capability bits fully express
what's supported. Allow PCS layer to participate in the validation.
Convert a number of drivers.
- Add support to set/get size of buffers on the Rx rings and size of
the tx copybreak buffer via ethtool.
- Support offloading TC actions as first-class citizens rather than
only as attributes of filters, improve sharing and device resource
utilization.
- WiFi (mac80211/cfg80211):
- support forwarding offload (ndo_fill_forward_path)
- support for background radar detection hardware
- SA Query Procedures offload on the AP side
New hardware / drivers
----------------------
- tsnep - FPGA based TSN endpoint Ethernet MAC used in PLCs with
real-time requirements for isochronous communication with protocols
like OPC UA Pub/Sub.
- Qualcomm BAM-DMUX WWAN - driver for data channels of modems
integrated into many older Qualcomm SoCs, e.g. MSM8916 or
MSM8974 (qcom_bam_dmux).
- Microchip LAN966x multi-port Gigabit AVB/TSN Ethernet Switch
driver with support for bridging, VLANs and multicast forwarding
(lan966x).
- iwlmei driver for co-operating between Intel's WiFi driver and
Intel's Active Management Technology (AMT) devices.
- mse102x - Vertexcom MSE102x Homeplug GreenPHY chips
- Bluetooth:
- MediaTek MT7921 SDIO devices
- Foxconn MT7922A
- Realtek RTL8852AE
Drivers
-------
- Significantly improve performance in the datapaths of:
lan78xx, ax88179_178a, lantiq_xrx200, bnxt.
- Intel Ethernet NICs:
- igb: support PTP/time PEROUT and EXTTS SDP functions on
82580/i354/i350 adapters
- ixgbevf: new PF -> VF mailbox API which avoids the risk of
mailbox corruption with ESXi
- iavf: support configuration of VLAN features of finer granularity,
stacked tags and filtering
- ice: PTP support for new E822 devices with sub-ns precision
- ice: support firmware activation without reboot
- Mellanox Ethernet NICs (mlx5):
- expose control over IRQ coalescing mode (CQE vs EQE) via ethtool
- support TC forwarding when tunnel encap and decap happen between
two ports of the same NIC
- dynamically size and allow disabling various features to save
resources for running in embedded / SmartNIC scenarios
- Broadcom Ethernet NICs (bnxt):
- use page frag allocator to improve Rx performance
- expose control over IRQ coalescing mode (CQE vs EQE) via ethtool
- Other Ethernet NICs:
- amd-xgbe: add Ryzen 6000 (Yellow Carp) Ethernet support
- Microsoft cloud/virtual NIC (mana):
- add XDP support (PASS, DROP, TX)
- Mellanox Ethernet switches (mlxsw):
- initial support for Spectrum-4 ASICs
- VxLAN with IPv6 underlay
- Marvell Ethernet switches (prestera):
- support flower flow templates
- add basic IP forwarding support
- NXP embedded Ethernet switches (ocelot & felix):
- support Per-Stream Filtering and Policing (PSFP)
- enable cut-through forwarding between ports by default
- support FDMA to improve packet Rx/Tx to CPU
- Other embedded switches:
- hellcreek: improve trapping management (STP and PTP) packets
- qca8k: support link aggregation and port mirroring
- Qualcomm 802.11ax WiFi (ath11k):
- qca6390, wcn6855: enable 802.11 power save mode in station mode
- BSS color change support
- WCN6855 hw2.1 support
- 11d scan offload support
- scan MAC address randomization support
- full monitor mode, only supported on QCN9074
- qca6390/wcn6855: report signal and tx bitrate
- qca6390: rfkill support
- qca6390/wcn6855: regdb.bin support
- Intel WiFi (iwlwifi):
- support SAR GEO Offset Mapping (SGOM) and Time-Aware-SAR (TAS)
in cooperation with the BIOS
- support for Optimized Connectivity Experience (OCE) scan
- support firmware API version 68
- lots of preparatory work for the upcoming Bz device family
- MediaTek WiFi (mt76):
- Specific Absorption Rate (SAR) support
- mt7921: 160 MHz channel support
- RealTek WiFi (rtw88):
- Specific Absorption Rate (SAR) support
- scan offload
- Other WiFi NICs
- ath10k: support fetching (pre-)calibration data from nvmem
- brcmfmac: configure keep-alive packet on suspend
- wcn36xx: beacon filter support
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----
iQIzBAABCAAdFiEE6jPA+I1ugmIBA4hXMUZtbf5SIrsFAmHbkZAACgkQMUZtbf5S
IruYkQ//XX7BggcwBfukPK83j0dONolClijqKcKR08g4vB5L8GXvv6OErKIWrh4k
h8JanCH352ZkbCSw3MvFdm825UYQv8vPMd6Qks/LJ4aSKqCuy4MIlAo+yOw4Km3O
i7++lRfma6DqHHI59wvLjWoxZSPu8lL+rI8UsZ5qMOlnNlGAOXsNrzRjaqQ3FddY
AMxZeBUtrPqUCCQZFq3U8apkYzUp7CA/3XR9zRcja3uPbrtOV2G+4whRF90qGNWz
Tm/QvJ9F/Ab292cbhxR4KuaQ3hUhaCQyDjbZk3+FZzZpAVhYTVqcNjny6+yXmbiP
NXRtwemnl1NlWKMnJM8lEeY48u626tRIkxA/Wtd61uoO5uKUSxfGP+UpUi+DfXbF
yIw50VQ7L2bpxXP/HjtmhVgZDaWKYyh22Zw4Hp/muMJz0hgUB0KODY3tf2jUWbjJ
0oEgocWyzhhwMQKqupTDCIaRgIs2ewYr4ZrFDhI3HnHC/vv1VjoPRUPIyxwppD2N
cXvZb3B1sWK8iX5gCbISGzyU4bB7I0rvJSTU42ueti7n6NqRFZ79qHQpYnnY+JdO
z1qOwY/d/yWfBoXVKRtRg2qz6CdEt5BQklwAgVEBgrFpf58gp694EwGMb1htY14J
r/k9bVpmyIFpUnBH2CPMRfBVA3tUTqzyzzFV4AMw40NYLKmhLdo=
=KLm3
-----END PGP SIGNATURE-----
Merge tag '5.17-net-next' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Jakub Kicinski:
"Core
----
- Defer freeing TCP skbs to the BH handler, whenever possible, or at
least perform the freeing outside of the socket lock section to
decrease cross-CPU allocator work and improve latency.
- Add netdevice refcount tracking to locate sources of netdevice and
net namespace refcount leaks.
- Make Tx watchdog less intrusive - avoid pausing Tx and restarting
all queues from a single CPU removing latency spikes.
- Various small optimizations throughout the stack from Eric Dumazet.
- Make netdev->dev_addr[] constant, force modifications to go via
appropriate helpers to allow us to keep addresses in ordered data
structures.
- Replace unix_table_lock with per-hash locks, improving performance
of bind() calls.
- Extend skb drop tracepoint with a drop reason.
- Allow SO_MARK and SO_PRIORITY setsockopt under CAP_NET_RAW.
BPF
---
- New helpers:
- bpf_find_vma(), find and inspect VMAs for profiling use cases
- bpf_loop(), runtime-bounded loop helper trading some execution
time for much faster (if at all converging) verification
- bpf_strncmp(), improve performance, avoid compiler flakiness
- bpf_get_func_arg(), bpf_get_func_ret(), bpf_get_func_arg_cnt()
for tracing programs, all inlined by the verifier
- Support BPF relocations (CO-RE) in the kernel loader.
- Further the support for BTF_TYPE_TAG annotations.
- Allow access to local storage in sleepable helpers.
- Convert verifier argument types to a composable form with different
attributes which can be shared across types (ro, maybe-null).
- Prepare libbpf for upcoming v1.0 release by cleaning up APIs,
creating new, extensible ones where missing and deprecating those
to be removed.
Protocols
---------
- WiFi (mac80211/cfg80211):
- notify user space about long "come back in N" AP responses,
allow it to react to such temporary rejections
- allow non-standard VHT MCS 10/11 rates
- use coarse time in airtime fairness code to save CPU cycles
- Bluetooth:
- rework of HCI command execution serialization to use a common
queue and work struct, and improve handling errors reported in
the middle of a batch of commands
- rework HCI event handling to use skb_pull_data, avoiding packet
parsing pitfalls
- support AOSP Bluetooth Quality Report
- SMC:
- support net namespaces, following the RDMA model
- improve connection establishment latency by pre-clearing buffers
- introduce TCP ULP for automatic redirection to SMC
- Multi-Path TCP:
- support ioctls: SIOCINQ, OUTQ, and OUTQNSD
- support socket options: IP_TOS, IP_FREEBIND, IP_TRANSPARENT,
IPV6_FREEBIND, and IPV6_TRANSPARENT, TCP_CORK and TCP_NODELAY
- support cmsgs: TCP_INQ
- improvements in the data scheduler (assigning data to subflows)
- support fastclose option (quick shutdown of the full MPTCP
connection, similar to TCP RST in regular TCP)
- MCTP (Management Component Transport) over serial, as defined by
DMTF spec DSP0253 - "MCTP Serial Transport Binding".
Driver API
----------
- Support timestamping on bond interfaces in active/passive mode.
- Introduce generic phylink link mode validation for drivers which
don't have any quirks and where MAC capability bits fully express
what's supported. Allow PCS layer to participate in the validation.
Convert a number of drivers.
- Add support to set/get size of buffers on the Rx rings and size of
the tx copybreak buffer via ethtool.
- Support offloading TC actions as first-class citizens rather than
only as attributes of filters, improve sharing and device resource
utilization.
- WiFi (mac80211/cfg80211):
- support forwarding offload (ndo_fill_forward_path)
- support for background radar detection hardware
- SA Query Procedures offload on the AP side
New hardware / drivers
----------------------
- tsnep - FPGA based TSN endpoint Ethernet MAC used in PLCs with
real-time requirements for isochronous communication with protocols
like OPC UA Pub/Sub.
- Qualcomm BAM-DMUX WWAN - driver for data channels of modems
integrated into many older Qualcomm SoCs, e.g. MSM8916 or MSM8974
(qcom_bam_dmux).
- Microchip LAN966x multi-port Gigabit AVB/TSN Ethernet Switch driver
with support for bridging, VLANs and multicast forwarding
(lan966x).
- iwlmei driver for co-operating between Intel's WiFi driver and
Intel's Active Management Technology (AMT) devices.
- mse102x - Vertexcom MSE102x Homeplug GreenPHY chips
- Bluetooth:
- MediaTek MT7921 SDIO devices
- Foxconn MT7922A
- Realtek RTL8852AE
Drivers
-------
- Significantly improve performance in the datapaths of: lan78xx,
ax88179_178a, lantiq_xrx200, bnxt.
- Intel Ethernet NICs:
- igb: support PTP/time PEROUT and EXTTS SDP functions on
82580/i354/i350 adapters
- ixgbevf: new PF -> VF mailbox API which avoids the risk of
mailbox corruption with ESXi
- iavf: support configuration of VLAN features of finer
granularity, stacked tags and filtering
- ice: PTP support for new E822 devices with sub-ns precision
- ice: support firmware activation without reboot
- Mellanox Ethernet NICs (mlx5):
- expose control over IRQ coalescing mode (CQE vs EQE) via ethtool
- support TC forwarding when tunnel encap and decap happen between
two ports of the same NIC
- dynamically size and allow disabling various features to save
resources for running in embedded / SmartNIC scenarios
- Broadcom Ethernet NICs (bnxt):
- use page frag allocator to improve Rx performance
- expose control over IRQ coalescing mode (CQE vs EQE) via ethtool
- Other Ethernet NICs:
- amd-xgbe: add Ryzen 6000 (Yellow Carp) Ethernet support
- Microsoft cloud/virtual NIC (mana):
- add XDP support (PASS, DROP, TX)
- Mellanox Ethernet switches (mlxsw):
- initial support for Spectrum-4 ASICs
- VxLAN with IPv6 underlay
- Marvell Ethernet switches (prestera):
- support flower flow templates
- add basic IP forwarding support
- NXP embedded Ethernet switches (ocelot & felix):
- support Per-Stream Filtering and Policing (PSFP)
- enable cut-through forwarding between ports by default
- support FDMA to improve packet Rx/Tx to CPU
- Other embedded switches:
- hellcreek: improve trapping management (STP and PTP) packets
- qca8k: support link aggregation and port mirroring
- Qualcomm 802.11ax WiFi (ath11k):
- qca6390, wcn6855: enable 802.11 power save mode in station mode
- BSS color change support
- WCN6855 hw2.1 support
- 11d scan offload support
- scan MAC address randomization support
- full monitor mode, only supported on QCN9074
- qca6390/wcn6855: report signal and tx bitrate
- qca6390: rfkill support
- qca6390/wcn6855: regdb.bin support
- Intel WiFi (iwlwifi):
- support SAR GEO Offset Mapping (SGOM) and Time-Aware-SAR (TAS)
in cooperation with the BIOS
- support for Optimized Connectivity Experience (OCE) scan
- support firmware API version 68
- lots of preparatory work for the upcoming Bz device family
- MediaTek WiFi (mt76):
- Specific Absorption Rate (SAR) support
- mt7921: 160 MHz channel support
- RealTek WiFi (rtw88):
- Specific Absorption Rate (SAR) support
- scan offload
- Other WiFi NICs
- ath10k: support fetching (pre-)calibration data from nvmem
- brcmfmac: configure keep-alive packet on suspend
- wcn36xx: beacon filter support"
* tag '5.17-net-next' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2048 commits)
tcp: tcp_send_challenge_ack delete useless param `skb`
net/qla3xxx: Remove useless DMA-32 fallback configuration
rocker: Remove useless DMA-32 fallback configuration
hinic: Remove useless DMA-32 fallback configuration
lan743x: Remove useless DMA-32 fallback configuration
net: enetc: Remove useless DMA-32 fallback configuration
cxgb4vf: Remove useless DMA-32 fallback configuration
cxgb4: Remove useless DMA-32 fallback configuration
cxgb3: Remove useless DMA-32 fallback configuration
bnx2x: Remove useless DMA-32 fallback configuration
et131x: Remove useless DMA-32 fallback configuration
be2net: Remove useless DMA-32 fallback configuration
vmxnet3: Remove useless DMA-32 fallback configuration
bna: Simplify DMA setting
net: alteon: Simplify DMA setting
myri10ge: Simplify DMA setting
qlcnic: Simplify DMA setting
net: allwinner: Fix print format
page_pool: remove spinlock in page_pool_refill_alloc_cache()
amt: fix wrong return type of amt_send_membership_update()
...
|
||
|
Linus Torvalds
|
bf4eebf8cf |
linux-kselftest-kunit-5.17-rc1
This KUnit update for Linux 5.17-rc1 consists of several fixes and enhancements. A few highlights: - Option --kconfig_add option allows easily tweaking kunitconfigs - make build subcommand can reconfigure if needed - doesn't error on tests without test plans - doesn't crash if no parameters are generated - defaults --jobs to # of cups - reports test parameter results as (K)TAP subtests -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEPZKym/RZuOCGeA/kCwJExA0NQxwFAmHY3T4ACgkQCwJExA0N QxwpSA//ZuAuMvAjedj0lgCBU5ocBQAHs7RsTmo6n3ORdTgZ/hjWF9dyyAgvIcb1 x+BW2M0KXVvpsl5UEuyWz1jQAc1aT4DCMJp/vUYeuwDXqtPxioZhJ9XeGtT+pBDy L6GoJeZYQXIGGnRigF0QDY9gQsmvGMQFSJ/NIADeU7XUqlyZlLMgWWa2fO3OKYw+ 33nUBFgObyElGwikyvjACiG+jSZgq9a0eWW1mdZ06sLa7Z+cZvsAyBa4bSdvoQt3 9s+3JAEHzQEDBwwRt2na6p18m3AA5vi8xyeu7Xz/0agv17TSPuKofx0L7F60sIQW oAyHQkHSj9X9s67kjCobu3TlswwsOaB4TEIOolHoqHjrwRPrQGcE4gddyVPGvs52 3Iu8lAgiCUjNbXKMcEismjrqWe8o4ICk+uVRnAOWjGT4zF/XmAtXnwM4ddZmoFZM mS/UmJscoTSV8wxN0QHcZw6TADvX+QNmdOMe3AlQMhhsIklmaWFg5Pf91QafbjST yBkXPoqbFlfpKUJ7oCzK3MvvmFzhBOTMIO2lWTSlMPR5xIw/wUR9Go0rKBCm29rf YPgwvM1RPkyY+37ZTbPqgpX0oIw5VTRteYdMJTDUzyO4nqSWCp8QYeIKUT/4YJqc mY7+wNdqhuXHdvVbsPvObeWqw7DDYZySVf2QJeta7dycBcMYKcE= =vGqB -----END PGP SIGNATURE----- Merge tag 'linux-kselftest-kunit-5.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest Pull KUnit updates from Shuah Khan: "This consists of several fixes and enhancements. A few highlights: - Option --kconfig_add option allows easily tweaking kunitconfigs - make build subcommand can reconfigure if needed - doesn't error on tests without test plans - doesn't crash if no parameters are generated - defaults --jobs to # of cups - reports test parameter results as (K)TAP subtests" * tag 'linux-kselftest-kunit-5.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: kunit: tool: Default --jobs to number of CPUs kunit: tool: fix newly introduced typechecker errors kunit: tool: make `build` subcommand also reconfigure if needed kunit: tool: delete kunit_parser.TestResult type kunit: tool: use dataclass instead of collections.namedtuple kunit: tool: suggest using decode_stacktrace.sh on kernel crash kunit: tool: reconfigure when the used kunitconfig changes kunit: tool: revamp message for invalid kunitconfig kunit: tool: add --kconfig_add to allow easily tweaking kunitconfigs kunit: tool: move Kconfig read_from_file/parse_from_string to package-level kunit: tool: print parsed test results fully incrementally kunit: Report test parameter results as (K)TAP subtests kunit: Don't crash if no parameters are generated kunit: tool: Report an error if any test has no subtests kunit: tool: Do not error on tests without test plans kunit: add run_checks.py script to validate kunit changes Documentation: kunit: remove claims that kunit is a mocking framework kunit: tool: fix --json output for skipped tests |
||
|
Colin Ian King
|
d99a8af48a |
lib: remove redundant assignment to variable ret
Variable ret is being assigned a value that is never read. If the for-loop is entered then ret is immediately re-assigned a new value. If the for-loop is not executed ret is never read. The assignment is redundant and can be removed. Signed-off-by: Colin Ian King <colin.i.king@gmail.com> Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org> Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org> |
||
|
Matthew Wilcox (Oracle)
|
25a8de7f8d |
XArray: Add xas_advance()
Add a new helper function to help iterate over multi-index entries. Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: William Kucharski <william.kucharski@oracle.com> |
||
Zizhuang Deng
|
dd827abe29 |
lib/mpi: Add the return value check of kcalloc()
Add the return value check of kcalloc() to avoid potential
NULL ptr dereference.
Fixes:
|
||
|
Jason A. Donenfeld
|
6048fdcc5f |
lib/crypto: blake2s: include as built-in
In preparation for using blake2s in the RNG, we change the way that it is wired-in to the build system. Instead of using ifdefs to select the right symbol, we use weak symbols. And because ARM doesn't need the generic implementation, we make the generic one default only if an arch library doesn't need it already, and then have arch libraries that do need it opt-in. So that the arch libraries can remain tristate rather than bool, we then split the shash part from the glue code. Acked-by: Herbert Xu <herbert@gondor.apana.org.au> Acked-by: Ard Biesheuvel <ardb@kernel.org> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Masahiro Yamada <masahiroy@kernel.org> Cc: linux-kbuild@vger.kernel.org Cc: linux-crypto@vger.kernel.org Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> |
||
|
Dirk Müller
|
36dacddbf0 |
lib/raid6: Use strict priority ranking for pq gen() benchmarking
On x86_64, currently 3 variants of AVX512, 3 variants of AVX2 and 3 variants of SSE2 are benchmarked on initialization, taking between 144-153 jiffies. Testing across a hardware pool of various generations of intel cpus I could not find a single case where SSE2 won over AVX2 or AVX512. There are cases where AVX2 wins over AVX512 however. Change "prefer" into an integer priority field (similar to how recov selection works) to have more than one ranking level available, which is backwards compatible with existing behavior. Give AVX2/512 variants higher priority over SSE2 in order to skip SSE testing when AVX is available. in a AVX2/x86_64/HZ=250 case this saves in the order of 200ms of initialization time. Signed-off-by: Dirk Müller <dmueller@suse.de> Acked-by: Paul Menzel <pmenzel@molgen.mpg.de> Signed-off-by: Song Liu <song@kernel.org> |
||
|
Dirk Müller
|
38640c4809 |
lib/raid6: skip benchmark of non-chosen xor_syndrome functions
In commit
|
||
|
Matthew Wilcox (Oracle)
|
821979f509 |
iov_iter: Convert iter_xarray to use folios
Take advantage of how kmap_local_folio() works to simplify the loop. Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: William Kucharski <william.kucharski@oracle.com> |
||
|
Greg Kroah-Hartman
|
cf6299b610 |
kobject: remove kset from struct kset_uevent_ops callbacks
There is no need to pass the pointer to the kset in the struct kset_uevent_ops callbacks as no one uses it, so just remove that pointer entirely. Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by: Wedson Almeida Filho <wedsonaf@google.com> Link: https://lore.kernel.org/r/20211227163924.3970661-1-gregkh@linuxfoundation.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
Wedson Almeida Filho
|
ee6d3dd4ed |
driver core: make kobj_type constant.
This way instances of kobj_type (which contain function pointers) can be stored in .rodata, which means that they cannot be [easily/accidentally] modified at runtime. Signed-off-by: Wedson Almeida Filho <wedsonaf@google.com> Link: https://lore.kernel.org/r/20211224231345.777370-1-wedsonaf@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
Christophe JAILLET
|
7c63f26cb5 |
lib: objagg: Use the bitmap API when applicable
Use 'bitmap_zalloc()' to simplify code, improve the semantic and reduce some open-coded arithmetic in allocator arguments. Also change the corresponding 'kfree()' into 'bitmap_free()' to keep consistency. Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Link: https://lore.kernel.org/r/f9541b085ec68e573004e1be200c11c9c901181a.1640295165.git.christophe.jaillet@wanadoo.fr Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
Al Viro
|
5f174ec3c1 |
logic_io instance of iounmap() needs volatile on argument
... same as the rest of implementations Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Richard Weinberger <richard@nod.at> |
||
|
Johannes Berg
|
4e8a5edac5 |
lib/logic_iomem: Fix operation on 32-bit
On 32-bit, the first entry might be at 0/NULL, but that's
strange and leads to issues, e.g. where we check "if (ret)".
Use a IOREMAP_BIAS/IOREMAP_MASK of 0x80000000UL to avoid
this. This then requires reducing the number of areas (via
MAX_AREAS), but we still have 128 areas, which is enough.
Fixes:
|
||
|
Johannes Berg
|
4e84139e14 |
lib/logic_iomem: Fix 32-bit build
On a 32-bit build, the (unsigned long long) casts throw warnings
(or errors) due to being to a different integer size. Cast to
uintptr_t first (with the __force for sparse) and then further
to get the consistent print on 32 and 64-bit.
Fixes:
|
||
|
David Gow
|
44b7da5fcd |
kunit: Report test parameter results as (K)TAP subtests
Currently, the results for individial parameters in a parameterised test are simply output as (K)TAP diagnostic lines. As kunit_tool now supports nested subtests, report each parameter as its own subtest. For example, here's what the output now looks like: # Subtest: inode_test_xtimestamp_decoding ok 1 - 1901-12-13 Lower bound of 32bit < 0 timestamp, no extra bits ok 2 - 1969-12-31 Upper bound of 32bit < 0 timestamp, no extra bits ok 3 - 1970-01-01 Lower bound of 32bit >=0 timestamp, no extra bits ok 4 - 2038-01-19 Upper bound of 32bit >=0 timestamp, no extra bits ok 5 - 2038-01-19 Lower bound of 32bit <0 timestamp, lo extra sec bit on ok 6 - 2106-02-07 Upper bound of 32bit <0 timestamp, lo extra sec bit on ok 7 - 2106-02-07 Lower bound of 32bit >=0 timestamp, lo extra sec bit on ok 8 - 2174-02-25 Upper bound of 32bit >=0 timestamp, lo extra sec bit on ok 9 - 2174-02-25 Lower bound of 32bit <0 timestamp, hi extra sec bit on ok 10 - 2242-03-16 Upper bound of 32bit <0 timestamp, hi extra sec bit on ok 11 - 2242-03-16 Lower bound of 32bit >=0 timestamp, hi extra sec bit on ok 12 - 2310-04-04 Upper bound of 32bit >=0 timestamp, hi extra sec bit on ok 13 - 2310-04-04 Upper bound of 32bit>=0 timestamp, hi extra sec bit 1. 1 ns ok 14 - 2378-04-22 Lower bound of 32bit>= timestamp. Extra sec bits 1. Max ns ok 15 - 2378-04-22 Lower bound of 32bit >=0 timestamp. All extra sec bits on ok 16 - 2446-05-10 Upper bound of 32bit >=0 timestamp. All extra sec bits on # inode_test_xtimestamp_decoding: pass:16 fail:0 skip:0 total:16 ok 1 - inode_test_xtimestamp_decoding Signed-off-by: David Gow <davidgow@google.com> Reviewed-by: Daniel Latypov <dlatypov@google.com> Reviewed-by: Brendan Higgins <brendanhiggins@google.com> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org> |
||
|
David Gow
|
37dbb4c7c7 |
kunit: Don't crash if no parameters are generated
It's possible that a parameterised test could end up with zero parameters. At the moment, the test function will nevertheless be called with NULL as the parameter. Instead, don't try to run the test code, and just mark the test as SKIPped. Reported-by: Daniel Latypov <dlatypov@google.com> Signed-off-by: David Gow <davidgow@google.com> Reviewed-by: Daniel Latypov <dlatypov@google.com> Reviewed-by: Brendan Higgins <brendanhiggins@google.com> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org> |
||
Eric W. Biederman
|
cead185526 |
exit: Rename complete_and_exit to kthread_complete_and_exit
Update complete_and_exit to call kthread_exit instead of do_exit. Change the name to reflect this change in functionality. All of the users of complete_and_exit are causing the current kthread to exit so this change makes it clear what is happening. Move the implementation of kthread_complete_and_exit from kernel/exit.c to to kernel/kthread.c. As this function is kthread specific it makes most sense to live with the kthread functions. There are no functional change. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com> |
||
Mark Rutland
|
5fb6e8cf53 |
locking/atomic: atomic64: Remove unusable atomic ops
The generic atomic64 implementation provides:
* atomic64_and_return()
* atomic64_or_return()
* atomic64_xor_return()
... but none of these exist in the standard atomic64 API as described by
scripts/atomic/atomics.tbl, and none of these have prototypes exposed by
<asm-generic/atomic64.h>.
The lkp kernel test robot noted this results in warnings when building with
W=1:
lib/atomic64.c:82:5: warning: no previous prototype for 'generic_atomic64_and_return' [-Wmissing-prototypes]
lib/atomic64.c:82:5: warning: no previous prototype for 'generic_atomic64_or_return' [-Wmissing-prototypes]
lib/atomic64.c:82:5: warning: no previous prototype for 'generic_atomic64_xor_return' [-Wmissing-prototypes]
This appears to have been a thinko in commit:
|
||
Ingo Molnar
|
6773cc31a9 |
Linux 5.16-rc5
-----BEGIN PGP SIGNATURE----- iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmG2fU0eHHRvcnZhbGRz QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGC7EH/3R7Rt+OD8Wn8Ss3 w8V+dBxVwa2u2oMTyUHPxaeOXZ7bi38XlUdLFPOK/76bGwO0a5TmYZqsWdRbGyT0 HfcYjHsQ0lbJXk/nh2oM47oJxJXVpThIHXJEk0FZ0Y5t+DYjIYlNHzqZymUyhLem St74zgWcyT+MXuqY34vB827FJDUnOxhhhi85tObeunaSPAomy9aiYidSC1ARREnz iz2VUntP/QnRnKVvL2nUZNzcz1xL5vfCRSKsRGRSv3qW1Y/1M71ylt6JVmSftWq+ VmMdFxFhdrb1OK/1ct/930Un/UP2NG9EJsWxote2XYlnVSZHzDqH7lUhbqgdCcLz 1m2tVNY= =7wRd -----END PGP SIGNATURE----- Merge tag 'v5.16-rc5' into locking/core, to pick up fixes Signed-off-by: Ingo Molnar <mingo@kernel.org> |
||
|
Jakub Kicinski
|
be3158290d |
Merge https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Andrii Nakryiko says:
====================
bpf-next 2021-12-10 v2
We've added 115 non-merge commits during the last 26 day(s) which contain
a total of 182 files changed, 5747 insertions(+), 2564 deletions(-).
The main changes are:
1) Various samples fixes, from Alexander Lobakin.
2) BPF CO-RE support in kernel and light skeleton, from Alexei Starovoitov.
3) A batch of new unified APIs for libbpf, logging improvements, version
querying, etc. Also a batch of old deprecations for old APIs and various
bug fixes, in preparation for libbpf 1.0, from Andrii Nakryiko.
4) BPF documentation reorganization and improvements, from Christoph Hellwig
and Dave Tucker.
5) Support for declarative initialization of BPF_MAP_TYPE_PROG_ARRAY in
libbpf, from Hengqi Chen.
6) Verifier log fixes, from Hou Tao.
7) Runtime-bounded loops support with bpf_loop() helper, from Joanne Koong.
8) Extend branch record capturing to all platforms that support it,
from Kajol Jain.
9) Light skeleton codegen improvements, from Kumar Kartikeya Dwivedi.
10) bpftool doc-generating script improvements, from Quentin Monnet.
11) Two libbpf v0.6 bug fixes, from Shuyi Cheng and Vincent Minet.
12) Deprecation warning fix for perf/bpf_counter, from Song Liu.
13) MAX_TAIL_CALL_CNT unification and MIPS build fix for libbpf,
from Tiezhu Yang.
14) BTF_KING_TYPE_TAG follow-up fixes, from Yonghong Song.
15) Selftests fixes and improvements, from Ilya Leoshkevich, Jean-Philippe
Brucker, Jiri Olsa, Maxim Mikityanskiy, Tirthendu Sarkar, Yucong Sun,
and others.
* https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (115 commits)
libbpf: Add "bool skipped" to struct bpf_map
libbpf: Fix typo in btf__dedup@LIBBPF_0.0.2 definition
bpftool: Switch bpf_object__load_xattr() to bpf_object__load()
selftests/bpf: Remove the only use of deprecated bpf_object__load_xattr()
selftests/bpf: Add test for libbpf's custom log_buf behavior
selftests/bpf: Replace all uses of bpf_load_btf() with bpf_btf_load()
libbpf: Deprecate bpf_object__load_xattr()
libbpf: Add per-program log buffer setter and getter
libbpf: Preserve kernel error code and remove kprobe prog type guessing
libbpf: Improve logging around BPF program loading
libbpf: Allow passing user log setting through bpf_object_open_opts
libbpf: Allow passing preallocated log_buf when loading BTF into kernel
libbpf: Add OPTS-based bpf_btf_load() API
libbpf: Fix bpf_prog_load() log_buf logic for log_level 0
samples/bpf: Remove unneeded variable
bpf: Remove redundant assignment to pointer t
selftests/bpf: Fix a compilation warning
perf/bpf_counter: Use bpf_map_create instead of bpf_create_map
samples: bpf: Fix 'unknown warning group' build warning on Clang
samples: bpf: Fix xdp_sample_user.o linking with Clang
...
====================
Link: https://lore.kernel.org/r/20211210234746.2100561-1-andrii@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
||
|
Marco Elver
|
bd3d5bd1a0 |
kcsan: Support WEAK_MEMORY with Clang where no objtool support exists
Clang and GCC behave a little differently when it comes to the
__no_sanitize_thread attribute, which has valid reasons, and depending
on context either one could be right.
Traditionally, user space ThreadSanitizer [1] still expects instrumented
builtin atomics (to avoid false positives) and __tsan_func_{entry,exit}
(to generate meaningful stack traces), even if the function has the
attribute no_sanitize("thread").
[1] https://clang.llvm.org/docs/ThreadSanitizer.html#attribute-no-sanitize-thread
GCC doesn't follow the same policy (for better or worse), and removes
all kinds of instrumentation if no_sanitize is added. Arguably, since
this may be a problem for user space ThreadSanitizer, we expect this may
change in future.
Since KCSAN != ThreadSanitizer, the likelihood of false positives even
without barrier instrumentation everywhere, is much lower by design.
At least for Clang, however, to fully remove all sanitizer
instrumentation, we must add the disable_sanitizer_instrumentation
attribute, which is available since Clang 14.0.
Signed-off-by: Marco Elver <elver@google.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
||
|
Marco Elver
|
69562e4983 |
kcsan: Add core support for a subset of weak memory modeling
Add support for modeling a subset of weak memory, which will enable detection of a subset of data races due to missing memory barriers. KCSAN's approach to detecting missing memory barriers is based on modeling access reordering, and enabled if `CONFIG_KCSAN_WEAK_MEMORY=y`, which depends on `CONFIG_KCSAN_STRICT=y`. The feature can be enabled or disabled at boot and runtime via the `kcsan.weak_memory` boot parameter. Each memory access for which a watchpoint is set up, is also selected for simulated reordering within the scope of its function (at most 1 in-flight access). We are limited to modeling the effects of "buffering" (delaying the access), since the runtime cannot "prefetch" accesses (therefore no acquire modeling). Once an access has been selected for reordering, it is checked along every other access until the end of the function scope. If an appropriate memory barrier is encountered, the access will no longer be considered for reordering. When the result of a memory operation should be ordered by a barrier, KCSAN can then detect data races where the conflict only occurs as a result of a missing barrier due to reordering accesses. Suggested-by: Dmitry Vyukov <dvyukov@google.com> Signed-off-by: Marco Elver <elver@google.com> Signed-off-by: Paul E. McKenney <paulmck@kernel.org> |
||
|
Jakub Kicinski
|
3150a73366 |
Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
No conflicts. Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
|
Jakub Kicinski
|
6efcdadc15 |
Merge https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf
Daniel Borkmann says: ==================== bpf 2021-12-08 We've added 12 non-merge commits during the last 22 day(s) which contain a total of 29 files changed, 659 insertions(+), 80 deletions(-). The main changes are: 1) Fix an off-by-two error in packet range markings and also add a batch of new tests for coverage of these corner cases, from Maxim Mikityanskiy. 2) Fix a compilation issue on MIPS JIT for R10000 CPUs, from Johan Almbladh. 3) Fix two functional regressions and a build warning related to BTF kfunc for modules, from Kumar Kartikeya Dwivedi. 4) Fix outdated code and docs regarding BPF's migrate_disable() use on non- PREEMPT_RT kernels, from Sebastian Andrzej Siewior. 5) Add missing includes in order to be able to detangle cgroup vs bpf header dependencies, from Jakub Kicinski. 6) Fix regression in BPF sockmap tests caused by missing detachment of progs from sockets when they are removed from the map, from John Fastabend. 7) Fix a missing "no previous prototype" warning in x86 JIT caused by BPF dispatcher, from Björn Töpel. * https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf: bpf: Add selftests to cover packet access corner cases bpf: Fix the off-by-two error in range markings treewide: Add missing includes masked by cgroup -> bpf dependency tools/resolve_btfids: Skip unresolved symbol warning for empty BTF sets bpf: Fix bpf_check_mod_kfunc_call for built-in modules bpf: Make CONFIG_DEBUG_INFO_BTF depend upon CONFIG_BPF_SYSCALL mips, bpf: Fix reference to non-existing Kconfig symbol bpf: Make sure bpf_disable_instrumentation() is safe vs preemption. Documentation/locking/locktypes: Update migrate_disable() bits. bpf, sockmap: Re-evaluate proto ops when psock is removed from sockmap bpf, sockmap: Attach map progs to psock early for feature probes bpf, x86: Fix "no previous prototype" warning ==================== Link: https://lore.kernel.org/r/20211208155125.11826-1-daniel@iogearbox.net Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
|
Eric Dumazet
|
4d92b95ff2 |
net: add net device refcount tracker infrastructure
net device are refcounted. Over the years we had numerous bugs caused by imbalanced dev_hold() and dev_put() calls. The general idea is to be able to precisely pair each decrement with a corresponding prior increment. Both share a cookie, basically a pointer to private data storing stack traces. This patch adds dev_hold_track() and dev_put_track(). To use these helpers, each data structure owning a refcount should also use a "netdevice_tracker" to pair the hold and put. netdevice_tracker dev_tracker; ... dev_hold_track(dev, &dev_tracker, GFP_ATOMIC); ... dev_put_track(dev, &dev_tracker); Whenever a leak happens, we will get precise stack traces of the point dev_hold_track() happened, at device dismantle phase. We will also get a stack trace if too many dev_put_track() for the same netdevice_tracker are attempted. This is guarded by CONFIG_NET_DEV_REFCNT_TRACKER option. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
|
Eric Dumazet
|
914a7b5000 |
lib: add tests for reference tracker
This module uses reference tracker, forcing two issues. 1) Double free of a tracker 2) leak of two trackers, one being allocated from softirq context. "modprobe test_ref_tracker" would emit the following traces. (Use scripts/decode_stacktrace.sh if necessary) [ 171.648681] reference already released. [ 171.653213] allocated in: [ 171.656523] alloctest_ref_tracker_alloc2+0x1c/0x20 [test_ref_tracker] [ 171.656526] init_module+0x86/0x1000 [test_ref_tracker] [ 171.656528] do_one_initcall+0x9c/0x220 [ 171.656532] do_init_module+0x60/0x240 [ 171.656536] load_module+0x32b5/0x3610 [ 171.656538] __do_sys_init_module+0x148/0x1a0 [ 171.656540] __x64_sys_init_module+0x1d/0x20 [ 171.656542] do_syscall_64+0x4a/0xb0 [ 171.656546] entry_SYSCALL_64_after_hwframe+0x44/0xae [ 171.656549] freed in: [ 171.659520] alloctest_ref_tracker_free+0x13/0x20 [test_ref_tracker] [ 171.659522] init_module+0xec/0x1000 [test_ref_tracker] [ 171.659523] do_one_initcall+0x9c/0x220 [ 171.659525] do_init_module+0x60/0x240 [ 171.659527] load_module+0x32b5/0x3610 [ 171.659529] __do_sys_init_module+0x148/0x1a0 [ 171.659532] __x64_sys_init_module+0x1d/0x20 [ 171.659534] do_syscall_64+0x4a/0xb0 [ 171.659536] entry_SYSCALL_64_after_hwframe+0x44/0xae [ 171.659575] ------------[ cut here ]------------ [ 171.659576] WARNING: CPU: 5 PID: 13016 at lib/ref_tracker.c:112 ref_tracker_free+0x224/0x270 [ 171.659581] Modules linked in: test_ref_tracker(+) [ 171.659591] CPU: 5 PID: 13016 Comm: modprobe Tainted: G S 5.16.0-smp-DEV #290 [ 171.659595] RIP: 0010:ref_tracker_free+0x224/0x270 [ 171.659599] Code: 5e 41 5f 5d c3 48 c7 c7 04 9c 74 a6 31 c0 e8 62 ee 67 00 83 7b 14 00 75 1a 83 7b 18 00 75 30 4c 89 ff 4c 89 f6 e8 9c 00 69 00 <0f> 0b bb ea ff ff ff eb ae 48 c7 c7 3a 0a 77 a6 31 c0 e8 34 ee 67 [ 171.659601] RSP: 0018:ffff89058ba0bbd0 EFLAGS: 00010286 [ 171.659603] RAX: 0000000000000029 RBX: ffff890586b19780 RCX: 08895bff57c7d100 [ 171.659604] RDX: c0000000ffff7fff RSI: 0000000000000282 RDI: ffffffffc0407000 [ 171.659606] RBP: ffff89058ba0bc88 R08: 0000000000000000 R09: ffffffffa6f342e0 [ 171.659607] R10: 00000000ffff7fff R11: 0000000000000000 R12: 000000008f000000 [ 171.659608] R13: 0000000000000014 R14: 0000000000000282 R15: ffffffffc0407000 [ 171.659609] FS: 00007f97ea29d740(0000) GS:ffff8923ff940000(0000) knlGS:0000000000000000 [ 171.659611] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 171.659613] CR2: 00007f97ea299000 CR3: 0000000186b4a004 CR4: 00000000001706e0 [ 171.659614] Call Trace: [ 171.659615] <TASK> [ 171.659631] ? alloctest_ref_tracker_free+0x13/0x20 [test_ref_tracker] [ 171.659633] ? init_module+0x105/0x1000 [test_ref_tracker] [ 171.659636] ? do_one_initcall+0x9c/0x220 [ 171.659638] ? do_init_module+0x60/0x240 [ 171.659641] ? load_module+0x32b5/0x3610 [ 171.659644] ? __do_sys_init_module+0x148/0x1a0 [ 171.659646] ? __x64_sys_init_module+0x1d/0x20 [ 171.659649] ? do_syscall_64+0x4a/0xb0 [ 171.659652] ? entry_SYSCALL_64_after_hwframe+0x44/0xae [ 171.659656] ? 0xffffffffc040a000 [ 171.659658] alloctest_ref_tracker_free+0x13/0x20 [test_ref_tracker] [ 171.659660] init_module+0x105/0x1000 [test_ref_tracker] [ 171.659663] do_one_initcall+0x9c/0x220 [ 171.659666] do_init_module+0x60/0x240 [ 171.659669] load_module+0x32b5/0x3610 [ 171.659672] __do_sys_init_module+0x148/0x1a0 [ 171.659676] __x64_sys_init_module+0x1d/0x20 [ 171.659678] do_syscall_64+0x4a/0xb0 [ 171.659694] ? exc_page_fault+0x6e/0x140 [ 171.659696] entry_SYSCALL_64_after_hwframe+0x44/0xae [ 171.659698] RIP: 0033:0x7f97ea3dbe7a [ 171.659700] Code: 48 8b 0d 61 8d 06 00 f7 d8 64 89 01 48 83 c8 ff c3 cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc 49 89 ca b8 af 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 2e 8d 06 00 f7 d8 64 89 01 48 [ 171.659701] RSP: 002b:00007ffea67ce608 EFLAGS: 00000246 ORIG_RAX: 00000000000000af [ 171.659703] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f97ea3dbe7a [ 171.659704] RDX: 00000000013a0ba0 RSI: 0000000000002808 RDI: 00007f97ea299000 [ 171.659705] RBP: 00007ffea67ce670 R08: 0000000000000003 R09: 0000000000000000 [ 171.659706] R10: 0000000000000000 R11: 0000000000000246 R12: 00000000013a1048 [ 171.659707] R13: 00000000013a0ba0 R14: 0000000001399930 R15: 00000000013a1030 [ 171.659709] </TASK> [ 171.659710] ---[ end trace f5dbd6afa41e60a9 ]--- [ 171.659712] leaked reference. [ 171.663393] alloctest_ref_tracker_alloc0+0x1c/0x20 [test_ref_tracker] [ 171.663395] test_ref_tracker_timer_func+0x9/0x20 [test_ref_tracker] [ 171.663397] call_timer_fn+0x31/0x140 [ 171.663401] expire_timers+0x46/0x110 [ 171.663403] __run_timers+0x16f/0x1b0 [ 171.663404] run_timer_softirq+0x1d/0x40 [ 171.663406] __do_softirq+0x148/0x2d3 [ 171.663408] leaked reference. [ 171.667101] alloctest_ref_tracker_alloc1+0x1c/0x20 [test_ref_tracker] [ 171.667103] init_module+0x81/0x1000 [test_ref_tracker] [ 171.667104] do_one_initcall+0x9c/0x220 [ 171.667106] do_init_module+0x60/0x240 [ 171.667108] load_module+0x32b5/0x3610 [ 171.667111] __do_sys_init_module+0x148/0x1a0 [ 171.667113] __x64_sys_init_module+0x1d/0x20 [ 171.667115] do_syscall_64+0x4a/0xb0 [ 171.667117] entry_SYSCALL_64_after_hwframe+0x44/0xae [ 171.667131] ------------[ cut here ]------------ [ 171.667132] WARNING: CPU: 5 PID: 13016 at lib/ref_tracker.c:30 ref_tracker_dir_exit+0x104/0x130 [ 171.667136] Modules linked in: test_ref_tracker(+) [ 171.667144] CPU: 5 PID: 13016 Comm: modprobe Tainted: G S W 5.16.0-smp-DEV #290 [ 171.667147] RIP: 0010:ref_tracker_dir_exit+0x104/0x130 [ 171.667150] Code: 01 00 00 00 00 ad de 48 89 03 4c 89 63 08 48 89 df e8 20 a0 d5 ff 4c 89 f3 4d 39 ee 75 a8 4c 89 ff 48 8b 75 d0 e8 7c 05 69 00 <0f> 0b eb 0c 4c 89 ff 48 8b 75 d0 e8 6c 05 69 00 41 8b 47 08 83 f8 [ 171.667151] RSP: 0018:ffff89058ba0bc68 EFLAGS: 00010286 [ 171.667154] RAX: 08895bff57c7d100 RBX: ffffffffc0407010 RCX: 000000000000003b [ 171.667156] RDX: 000000000000003c RSI: 0000000000000282 RDI: ffffffffc0407000 [ 171.667157] RBP: ffff89058ba0bc98 R08: 0000000000000000 R09: ffffffffa6f342e0 [ 171.667159] R10: 00000000ffff7fff R11: 0000000000000000 R12: dead000000000122 [ 171.667160] R13: ffffffffc0407010 R14: ffffffffc0407010 R15: ffffffffc0407000 [ 171.667162] FS: 00007f97ea29d740(0000) GS:ffff8923ff940000(0000) knlGS:0000000000000000 [ 171.667164] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 171.667166] CR2: 00007f97ea299000 CR3: 0000000186b4a004 CR4: 00000000001706e0 [ 171.667169] Call Trace: [ 171.667170] <TASK> [ 171.667171] ? 0xffffffffc040a000 [ 171.667173] init_module+0x126/0x1000 [test_ref_tracker] [ 171.667175] do_one_initcall+0x9c/0x220 [ 171.667179] do_init_module+0x60/0x240 [ 171.667182] load_module+0x32b5/0x3610 [ 171.667186] __do_sys_init_module+0x148/0x1a0 [ 171.667189] __x64_sys_init_module+0x1d/0x20 [ 171.667192] do_syscall_64+0x4a/0xb0 [ 171.667194] ? exc_page_fault+0x6e/0x140 [ 171.667196] entry_SYSCALL_64_after_hwframe+0x44/0xae [ 171.667199] RIP: 0033:0x7f97ea3dbe7a [ 171.667200] Code: 48 8b 0d 61 8d 06 00 f7 d8 64 89 01 48 83 c8 ff c3 cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc 49 89 ca b8 af 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 2e 8d 06 00 f7 d8 64 89 01 48 [ 171.667201] RSP: 002b:00007ffea67ce608 EFLAGS: 00000246 ORIG_RAX: 00000000000000af [ 171.667203] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f97ea3dbe7a [ 171.667204] RDX: 00000000013a0ba0 RSI: 0000000000002808 RDI: 00007f97ea299000 [ 171.667205] RBP: 00007ffea67ce670 R08: 0000000000000003 R09: 0000000000000000 [ 171.667206] R10: 0000000000000000 R11: 0000000000000246 R12: 00000000013a1048 [ 171.667207] R13: 00000000013a0ba0 R14: 0000000001399930 R15: 00000000013a1030 [ 171.667209] </TASK> [ 171.667210] ---[ end trace f5dbd6afa41e60aa ]--- Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
|
Eric Dumazet
|
4e66934eaa |
lib: add reference counting tracking infrastructure
It can be hard to track where references are taken and released. In networking, we have annoying issues at device or netns dismantles, and we had various proposals to ease root causing them. This patch adds new infrastructure pairing refcount increases and decreases. This will self document code, because programmers will have to associate increments/decrements. This is controled by CONFIG_REF_TRACKER which can be selected by users of this feature. This adds both cpu and memory costs, and thus should probably be used with care. Signed-off-by: Eric Dumazet <edumazet@google.com> Reviewed-by: Dmitry Vyukov <dvyukov@google.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
|
Christophe JAILLET
|
52e68cd60d |
vsprintf: Use non-atomic bitmap API when applicable
The 'set' bitmap is local to this function. No concurrent access to it is possible. So prefer the non-atomic '__[set|clear]_bit()' function to save a few cycles. Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Reviewed-by: Petr Mladek <pmladek@suse.com> Signed-off-by: Petr Mladek <pmladek@suse.com> Link: https://lore.kernel.org/r/1abf81a5e509d372393bd22041eed4ebc07ef9f7.1638023178.git.christophe.jaillet@wanadoo.fr |
||
|
Sebastian Andrzej Siewior
|
9a75bd0c52 |
lockdep/selftests: Adapt ww-tests for PREEMPT_RT
The ww-mutex selftest operates directly on ww_mutex::base and assumes its type is struct mutex. This isn't true on PREEMPT_RT which turns the mutex into a rtmutex. Add a ww_mutex_base_ abstraction which maps to the relevant mutex_ or rt_mutex_ function. Change the CONFIG_DEBUG_MUTEXES ifdef to DEBUG_WW_MUTEXES. The latter is true for the MUTEX and RTMUTEX implementation of WW-MUTEX. The assignment is required in order to pass the tests. Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lore.kernel.org/r/20211129174654.668506-10-bigeasy@linutronix.de |
||
|
Sebastian Andrzej Siewior
|
a529f8db89 |
lockdep/selftests: Skip the softirq related tests on PREEMPT_RT
The softirq context on PREEMPT_RT is different compared to !PREEMPT_RT. As such lockdep_softirq_enter() is a nop and the all the "softirq safe" tests fail on PREEMPT_RT because there is no difference. Skip the softirq context tests on PREEMPT_RT. Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lore.kernel.org/r/20211129174654.668506-9-bigeasy@linutronix.de |
||
|
Sebastian Andrzej Siewior
|
512bf713cb |
lockdep/selftests: Unbalanced migrate_disable() & rcu_read_lock().
The tests with unbalanced lock() + unlock() operation leave a modified preemption counter behind which is then reset to its original value after the test. The spin_lock() function on PREEMPT_RT does not include a preempt_disable() statement but migrate_disable() and read_rcu_lock(). As a consequence both counter never get back to their original value and the system explodes later after the selftest. In the double-unlock case on PREEMPT_RT, the migrate_disable() and RCU code will trigger a warning which should be avoided. These counter should not be decremented below their initial value. Save both counters and bring them back to their original value after the test. In the double-unlock case, increment both counter in advance to they become balanced after the double unlock. Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lore.kernel.org/r/20211129174654.668506-8-bigeasy@linutronix.de |
||
|
Sebastian Andrzej Siewior
|
fc78dd08e6 |
lockdep/selftests: Avoid using local_lock_{acquire|release}().
The local_lock related functions local_lock_acquire() local_lock_release() are part of the internal implementation and should be avoided. Define the lock as DEFINE_PER_CPU so the normal local_lock() function can be used. Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lore.kernel.org/r/20211129174654.668506-7-bigeasy@linutronix.de |
||
Kumar Kartikeya Dwivedi
|
d9847eb8be |
bpf: Make CONFIG_DEBUG_INFO_BTF depend upon CONFIG_BPF_SYSCALL
Vinicius Costa Gomes reported [0] that build fails when
CONFIG_DEBUG_INFO_BTF is enabled and CONFIG_BPF_SYSCALL is disabled.
This leads to btf.c not being compiled, and then no symbol being present
in vmlinux for the declarations in btf.h. Since BTF is not useful
without enabling BPF subsystem, disallow this combination.
However, theoretically disabling both now could still fail, as the
symbol for kfunc_btf_id_list variables is not available. This isn't a
problem as the compiler usually optimizes the whole register/unregister
call, but at lower optimization levels it can fail the build in linking
stage.
Fix that by adding dummy variables so that modules taking address of
them still work, but the whole thing is a noop.
[0]: https://lore.kernel.org/bpf/20211110205418.332403-1-vinicius.gomes@intel.com
Fixes:
|
||
|
Arnd Bergmann
|
f7e5b9bfa6 |
siphash: use _unaligned version by default
On ARM v6 and later, we define CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS
because the ordinary load/store instructions (ldr, ldrh, ldrb) can
tolerate any misalignment of the memory address. However, load/store
double and load/store multiple instructions (ldrd, ldm) may still only
be used on memory addresses that are 32-bit aligned, and so we have to
use the CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS macro with care, or we
may end up with a severe performance hit due to alignment traps that
require fixups by the kernel. Testing shows that this currently happens
with clang-13 but not gcc-11. In theory, any compiler version can
produce this bug or other problems, as we are dealing with undefined
behavior in C99 even on architectures that support this in hardware,
see also https://gcc.gnu.org/bugzilla/show_bug.cgi?id=100363.
Fortunately, the get_unaligned() accessors do the right thing: when
building for ARMv6 or later, the compiler will emit unaligned accesses
using the ordinary load/store instructions (but avoid the ones that
require 32-bit alignment). When building for older ARM, those accessors
will emit the appropriate sequence of ldrb/mov/orr instructions. And on
architectures that can truly tolerate any kind of misalignment, the
get_unaligned() accessors resolve to the leXX_to_cpup accessors that
operate on aligned addresses.
Since the compiler will in fact emit ldrd or ldm instructions when
building this code for ARM v6 or later, the solution is to use the
unaligned accessors unconditionally on architectures where this is
known to be fast. The _aligned version of the hash function is
however still needed to get the best performance on architectures
that cannot do any unaligned access in hardware.
This new version avoids the undefined behavior and should produce
the fastest hash on all architectures we support.
Link: https://lore.kernel.org/linux-arm-kernel/20181008211554.5355-4-ard.biesheuvel@linaro.org/
Link: https://lore.kernel.org/linux-crypto/CAK8P3a2KfmmGDbVHULWevB0hv71P2oi2ZCHEAqT=8dQfa0=cqQ@mail.gmail.com/
Reported-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Fixes:
|
||
Linus Walleij
|
2448eab440 |
Linux 5.16-rc2
-----BEGIN PGP SIGNATURE----- iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmGavnseHHRvcnZhbGRz QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGcl4H/jyFVlHDSa+utMA5 7PEQX0AarkBtSvKUgK/SivZxX06nYp2UU5L4Jn70O/mccXWo0ru82eDVO3nSImDR Mi668IqzbYfGqVL6CMztDku+XbyT3Yr/i9QILFbLWV5DhCM422GXXN8PFBibDHdI 6Oyt1WoUh404yjVIHOCNwprfLObxREV6ARhFsIsmCRa8Hf+RkKOY5Twua6j5emm5 aamiq6SYLtf2H5+DwkR5TnPkie6I2o8oLtA7JYiJpKh5KK75qjlpzFd3S3OWsi1H 0g752g12r7tLh4ac3Xfgwf36pQ2CdiZ7NUOkJhZWT4aHPqPh+MVheQfpR41f5Sgc pvFslTo= =QdMf -----END PGP SIGNATURE----- Merge tag 'v5.16-rc2' into devel Linux 5.16-rc2 is needed because nonurgent fixes headed for next are strongly textually dependent on a fix that was applied for rc2. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> |
||
Helge Deller
|
8d192bec53 |
parisc: Increase FRAME_WARN to 2048 bytes on parisc
PA-RISC uses a much bigger frame size for functions than other architectures. So increase it to 2048 for 32- and 64-bit kernels. This fixes e.g. a warning in lib/xxhash.c. Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Helge Deller <deller@gmx.de> |
||
|
Kees Cook
|
cab71f7495 |
kasan: test: silence intentional read overflow warnings
As done in commit |
||
|
Linus Torvalds
|
4c388a8e74 |
zstd fixes for v5.16-rc1
Fix stack usage on parisc & improve code size bloat
This PR contains 3 commits:
1. Fixes a minor unused variable warning reported by Kernel test robot [0].
2. Improves the reported code bloat (-88KB / 374KB) [1] by outlining
some functions that are unlikely to be used in performance sensitive
workloads.
3. Fixes the reported excess stack usage on parisc [2] by removing -O3
from zstd's compilation flags. -O3 triggered bugs in the hppa-linux-gnu
gcc-8 compiler. -O2 performance is acceptable: neutral compression,
about -1% decompression speed. We also reduce code bloat
(-105KB / 374KB).
After this commit our code bloat is cut from 374KB to 105KB with gcc-11.
If we wanted to cut the remaining 105KB we'd likely have to trade
signicant performance, so I want to say that this is enough for now.
We should be able to get further gains without sacrificing speed, but
that will take some significant optimization effort, and isn't suitable
for a quick fix. I've opened an upstream issue [3] to track the code size,
and try to avoid future regressions, and improve it in the long term.
[0] https://lore.kernel.org/linux-mm/202111120312.833wII4i-lkp@intel.com/T/
[1] https://lkml.org/lkml/2021/11/15/710
[2] https://lkml.org/lkml/2021/11/14/189
[3] https://github.com/facebook/zstd/issues/2867
Link: https://lore.kernel.org/r/20211117014949.1169186-1-nickrterrell@gmail.com/
Link: https://lore.kernel.org/r/20211117201459.1194876-1-nickrterrell@gmail.com/
Signed-off-by: Nick Terrell <terrelln@fb.com>
-----BEGIN PGP SIGNATURE-----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=kBgl
-----END PGP SIGNATURE-----
Merge tag 'zstd-for-linus-5.16-rc1' of git://github.com/terrelln/linux
Pull zstd fixes from Nick Terrell:
"Fix stack usage on parisc & improve code size bloat
This contains three commits:
1. Fixes a minor unused variable warning reported by Kernel test
robot [0].
2. Improves the reported code bloat (-88KB / 374KB) [1] by outlining
some functions that are unlikely to be used in performance
sensitive workloads.
3. Fixes the reported excess stack usage on parisc [2] by removing
-O3 from zstd's compilation flags. -O3 triggered bugs in the
hppa-linux-gnu gcc-8 compiler. -O2 performance is acceptable:
neutral compression, about -1% decompression speed. We also reduce
code bloat (-105KB / 374KB).
After this our code bloat is cut from 374KB to 105KB with gcc-11. If
we wanted to cut the remaining 105KB we'd likely have to trade
signicant performance, so I want to say that this is enough for now.
We should be able to get further gains without sacrificing speed, but
that will take some significant optimization effort, and isn't
suitable for a quick fix. I've opened an upstream issue [3] to track
the code size, and try to avoid future regressions, and improve it in
the long term"
Link: https://lore.kernel.org/linux-mm/202111120312.833wII4i-lkp@intel.com/T/ [0]
Link: https://lkml.org/lkml/2021/11/15/710 [1]
Link: https://lkml.org/lkml/2021/11/14/189 [2]
Link: https://github.com/facebook/zstd/issues/2867 [3]
Link: https://lore.kernel.org/r/20211117014949.1169186-1-nickrterrell@gmail.com/
Link: https://lore.kernel.org/r/20211117201459.1194876-1-nickrterrell@gmail.com/
* tag 'zstd-for-linus-5.16-rc1' of git://github.com/terrelln/linux:
lib: zstd: Don't add -O3 to cflags
lib: zstd: Don't inline functions in zstd_opt.c
lib: zstd: Fix unused variable warning
|
||
Nick Terrell
|
7416cdc9b9 |
lib: zstd: Don't add -O3 to cflags
After the update to zstd-1.4.10 passing -O3 is no longer necessary to get good performance from zstd. Using the default optimization level -O2 is sufficient to get good performance. I've measured no significant change to compression speed, and a ~1% decompression speed loss, which is acceptable. This fixes the reported parisc -Wframe-larger-than=1536 errors [0]. The gcc-8-hppa-linux-gnu compiler performed very poorly with -O3, generating stacks that are ~3KB. With -O2 these same functions generate stacks in the < 100B, completely fixing the problem. Function size deltas are listed below: ZSTD_compressBlock_fast_extDict_generic: 3800 -> 68 ZSTD_compressBlock_fast: 2216 -> 40 ZSTD_compressBlock_fast_dictMatchState: 1848 -> 64 ZSTD_compressBlock_doubleFast_extDict_generic: 3744 -> 76 ZSTD_fillDoubleHashTable: 3252 -> 0 ZSTD_compressBlock_doubleFast: 5856 -> 36 ZSTD_compressBlock_doubleFast_dictMatchState: 5380 -> 84 ZSTD_copmressBlock_lazy2: 2420 -> 72 Additionally, this improves the reported code bloat [1]. With gcc-11 bloat-o-meter shows an 80KB code size improvement: ``` > ../scripts/bloat-o-meter vmlinux.old vmlinux add/remove: 31/8 grow/shrink: 24/155 up/down: 25734/-107924 (-82190) Total: Before=6418562, After=6336372, chg -1.28% ``` Compared to before the zstd-1.4.10 update we see a total code size regression of 105KB, down from 374KB at v5.16-rc1: ``` > ../scripts/bloat-o-meter vmlinux.old vmlinux add/remove: 292/62 grow/shrink: 56/88 up/down: 235009/-127487 (107522) Total: Before=6228850, After=6336372, chg +1.73% ``` [0] https://lkml.org/lkml/2021/11/15/710 [1] https://lkml.org/lkml/2021/11/14/189 Link: https://lore.kernel.org/r/20211117014949.1169186-4-nickrterrell@gmail.com/ Link: https://lore.kernel.org/r/20211117201459.1194876-4-nickrterrell@gmail.com/ Reported-by: Geert Uytterhoeven <geert@linux-m68k.org> Tested-by: Geert Uytterhoeven <geert@linux-m68k.org> Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Nick Terrell <terrelln@fb.com> |
||
|
Nick Terrell
|
1974990cca |
lib: zstd: Don't inline functions in zstd_opt.c
`zstd_opt.c` contains the match finder for the highest compression levels. These levels are already very slow, and are unlikely to be used in the kernel. If they are used, they shouldn't be used in latency sensitive workloads, so slowing them down shouldn't be a big deal. This saves 188 KB of the 288 KB regression reported by Geert Uytterhoeven [0]. I've also opened an issue upstream [1] so that we can properly tackle the code size issue in `zstd_opt.c` for all users, and can hopefully remove this hack in the next zstd version we import. Bloat-o-meter output on x86-64: ``` > ../scripts/bloat-o-meter vmlinux.old vmlinux add/remove: 6/5 grow/shrink: 1/9 up/down: 16673/-209939 (-193266) Function old new delta ZSTD_compressBlock_opt_generic.constprop - 7559 +7559 ZSTD_insertBtAndGetAllMatches - 6304 +6304 ZSTD_insertBt1 - 1731 +1731 ZSTD_storeSeq - 693 +693 ZSTD_BtGetAllMatches - 255 +255 ZSTD_updateRep - 128 +128 ZSTD_updateTree 96 99 +3 ZSTD_insertAndFindFirstIndexHash3 81 - -81 ZSTD_setBasePrices.constprop 98 - -98 ZSTD_litLengthPrice.constprop 138 - -138 ZSTD_count 362 181 -181 ZSTD_count_2segments 1407 938 -469 ZSTD_insertBt1.constprop 2689 - -2689 ZSTD_compressBlock_btultra2 19990 423 -19567 ZSTD_compressBlock_btultra 19633 15 -19618 ZSTD_initStats_ultra 19825 - -19825 ZSTD_compressBlock_btopt 20374 12 -20362 ZSTD_compressBlock_btopt_extDict 29984 12 -29972 ZSTD_compressBlock_btultra_extDict 30718 15 -30703 ZSTD_compressBlock_btopt_dictMatchState 32689 12 -32677 ZSTD_compressBlock_btultra_dictMatchState 33574 15 -33559 Total: Before=6611828, After=6418562, chg -2.92% ``` [0] https://lkml.org/lkml/2021/11/14/189 [1] https://github.com/facebook/zstd/issues/2862 Link: https://lore.kernel.org/r/20211117014949.1169186-3-nickrterrell@gmail.com/ Link: https://lore.kernel.org/r/20211117201459.1194876-3-nickrterrell@gmail.com/ Reported-by: Geert Uytterhoeven <geert@linux-m68k.org> Tested-by: Geert Uytterhoeven <geert@linux-m68k.org> Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Nick Terrell <terrelln@fb.com> |
||
|
Nick Terrell
|
ae8d67b211 |
lib: zstd: Fix unused variable warning
The variable `litLengthSum` is only used by an `assert()`, so when asserts are disabled the compiler doesn't see any usage and warns. This issue is already fixed upstream by PR #2838 [0]. It was reported by the Kernel test robot in [1]. Another approach would be to change zstd's disabled `assert()` definition to use the argument in a disabled branch, instead of ignoring the argument. I've avoided this approach because there are some small changes necessary to get zstd to build, and I would want to thoroughly re-test for performance, since that is slightly changing the code in every function in zstd. It seems like a trivial change, but some functions are pretty sensitive to small changes. However, I think it is a valid approach that I would like to see upstream take, so I've opened Issue #2868 to attempt this upstream. Lastly, I've chosen not to use __maybe_unused because all code in lib/zstd/ must eventually be upstreamed. Upstream zstd can't use __maybe_unused because it isn't portable across all compilers. [0] https://github.com/facebook/zstd/pull/2838 [1] https://lore.kernel.org/linux-mm/202111120312.833wII4i-lkp@intel.com/T/ [2] https://github.com/facebook/zstd/issues/2868 Link: https://lore.kernel.org/r/20211117014949.1169186-2-nickrterrell@gmail.com/ Link: https://lore.kernel.org/r/20211117201459.1194876-2-nickrterrell@gmail.com/ Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Nick Terrell <terrelln@fb.com> |
||
|
Linus Torvalds
|
7d5775d49e |
printk fixup for 5.16
-----BEGIN PGP SIGNATURE----- iQIzBAABCAAdFiEESH4wyp42V4tXvYsjUqAMR0iAlPIFAmGWF6YACgkQUqAMR0iA lPJJ+RAAm9pi/EElKKl+lOlBl+ehJlKuNLnPQWFmmaRc9xd0ruUipp1nsaktLJ8f R/PkSwR/YWpBWlF8P4o+x9sOFyTNyLasoHtqsinEcAJI4lb7d1KOrPliTXyr15Ai A303djwJmwCw5KxAPOjkG/nMBlpMIAQRee9GDWs1ykfSlIsI4jp7isVbCFNCQNVF auHYq1bfJ5MJYPjxIDZUt+NF7kg7dD4k4g+VCVjaH1u8pGeaCUCtnNjMFOk1XfU8 yFQnaDcrAu4zJPq3d74z4eN9Bk+su8+DhnfrAEFjuFxGTgYc2MyRt0gGFeiUtNs4 rvST/eHBO4zeuL18S8G+fLcig/9ZYE73xzjdOCzRzLDjn0VQr9t06ez1QqJOb4D6 A4SSufwek5NIqYKMlhV/az2EceQYK8Wv3KAz8w98KDfwvVVhUSgE23MbTCO0hvQU PWF35d3hQ+9oH0ZGYRumb8OpXtKJ+2KmzyN8Z0xhivHFBIKlcW6IBGhWRANclJO8 jNAM3jiwi8fRDVM2wI1fmgeEmMhG+WuTI3dJVu3tu4vI923FW5GdY6ev5EvH0Ts0 khTwIjtmCHUJGSeWajy3Gi9irdyhPyPNRMqgal4GS+gGpVU2mMMKTG+NzxxtCRKR BUgfCjFDoDJWrNWIzzOwNqgF0Y+V9GgCZOkb73u/y+xVx0Rmc6U= =wbBy -----END PGP SIGNATURE----- Merge tag 'printk-for-5.16-fixup' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux Pull printk fixes from Petr Mladek: - Try to flush backtraces from other CPUs also on the local one. This was a regression caused by printk_safe buffers removal. - Remove header dependency warning. * tag 'printk-for-5.16-fixup' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux: printk: Remove printk.h inclusion in percpu.h printk: restore flushing of NMI buffers on remote CPUs after NMI backtraces |
||
|
Andy Shevchenko
|
acdb89b6c8 |
lib/string_helpers: Introduce managed variant of kasprintf_strarray()
Some of the users want to have easy way to allocate array of strings that will be automatically cleaned when associated device is gone. Introduce managed variant of kasprintf_strarray() for such use cases. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> |
||
|
Andy Shevchenko
|
418e0a3551 |
lib/string_helpers: Introduce kasprintf_strarray()
We have a few users already that basically want to have array of sequential strings to be allocated and filled. Provide a helper for them (basically adjusted version from gpio-mockup.c). Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> |
||
|
Petr Mladek
|
bf6d0d1e1a | Merge branch 'rework/printk_safe-removal' into for-linus | ||
|
Tiezhu Yang
|
ebf7f6f0a6 |
bpf: Change value of MAX_TAIL_CALL_CNT from 32 to 33
In the current code, the actual max tail call count is 33 which is greater than MAX_TAIL_CALL_CNT (defined as 32). The actual limit is not consistent with the meaning of MAX_TAIL_CALL_CNT and thus confusing at first glance. We can see the historical evolution from commit |
||
|
Linus Torvalds
|
c8c109546a |
Update to zstd-1.4.10
This PR includes 5 commits that update the zstd library version:
1. Adds a new kernel-style wrapper around zstd. This wrapper API
is functionally equivalent to the subset of the current zstd API that is
currently used. The wrapper API changes to be kernel style so that the symbols
don't collide with zstd's symbols. The update to zstd-1.4.10 maintains the same
API and preserves the semantics, so that none of the callers need to be
updated. All callers are updated in the commit, because there are zero
functional changes.
2. Adds an indirection for `lib/decompress_unzstd.c` so it
doesn't depend on the layout of `lib/zstd/` to include every source file.
This allows the next patch to be automatically generated.
3. Imports the zstd-1.4.10 source code. This commit is automatically generated
from upstream zstd (https://github.com/facebook/zstd).
4. Adds me (terrelln@fb.com) as the maintainer of `lib/zstd`.
5. Fixes a newly added build warning for clang.
The discussion around this patchset has been pretty long, so I've included a
FAQ-style summary of the history of the patchset, and why we are taking this
approach.
Why do we need to update?
-------------------------
The zstd version in the kernel is based off of zstd-1.3.1, which is was released
August 20, 2017. Since then zstd has seen many bug fixes and performance
improvements. And, importantly, upstream zstd is continuously fuzzed by OSS-Fuzz,
and bug fixes aren't backported to older versions. So the only way to sanely get
these fixes is to keep up to date with upstream zstd. There are no known security
issues that affect the kernel, but we need to be able to update in case there
are. And while there are no known security issues, there are relevant bug fixes.
For example the problem with large kernel decompression has been fixed upstream
for over 2 years https://lkml.org/lkml/2020/9/29/27.
Additionally the performance improvements for kernel use cases are significant.
Measured for x86_64 on my Intel i9-9900k @ 3.6 GHz:
- BtrFS zstd compression at levels 1 and 3 is 5% faster
- BtrFS zstd decompression+read is 15% faster
- SquashFS zstd decompression+read is 15% faster
- F2FS zstd compression+write at level 3 is 8% faster
- F2FS zstd decompression+read is 20% faster
- ZRAM decompression+read is 30% faster
- Kernel zstd decompression is 35% faster
- Initramfs zstd decompression+build is 5% faster
On top of this, there are significant performance improvements coming down the
line in the next zstd release, and the new automated update patch generation
will allow us to pull them easily.
How is the update patch generated?
----------------------------------
The first two patches are preparation for updating the zstd version. Then the
3rd patch in the series imports upstream zstd into the kernel. This patch is
automatically generated from upstream. A script makes the necessary changes and
imports it into the kernel. The changes are:
- Replace all libc dependencies with kernel replacements and rewrite includes.
- Remove unncessary portability macros like: #if defined(_MSC_VER).
- Use the kernel xxhash instead of bundling it.
This automation gets tested every commit by upstream's continuous integration.
When we cut a new zstd release, we will submit a patch to the kernel to update
the zstd version in the kernel.
The automated process makes it easy to keep the kernel version of zstd up to
date. The current zstd in the kernel shares the guts of the code, but has a lot
of API and minor changes to work in the kernel. This is because at the time
upstream zstd was not ready to be used in the kernel envrionment as-is. But,
since then upstream zstd has evolved to support being used in the kernel as-is.
Why are we updating in one big patch?
-------------------------------------
The 3rd patch in the series is very large. This is because it is restructuring
the code, so it both deletes the existing zstd, and re-adds the new structure.
Future updates will be directly proportional to the changes in upstream zstd
since the last import. They will admittidly be large, as zstd is an actively
developed project, and has hundreds of commits between every release. However,
there is no other great alternative.
One option ruled out is to replay every upstream zstd commit. This is not feasible
for several reasons:
- There are over 3500 upstream commits since the zstd version in the kernel.
- The automation to automatically generate the kernel update was only added recently,
so older commits cannot easily be imported.
- Not every upstream zstd commit builds.
- Only zstd releases are "supported", and individual commits may have bugs that were
fixed before a release.
Another option to reduce the patch size would be to first reorganize to the new
file structure, and then apply the patch. However, the current kernel zstd is formatted
with clang-format to be more "kernel-like". But, the new method imports zstd as-is,
without additional formatting, to allow for closer correlation with upstream, and
easier debugging. So the patch wouldn't be any smaller.
It also doesn't make sense to import upstream zstd commit by commit going
forward. Upstream zstd doesn't support production use cases running of the
development branch. We have a lot of post-commit fuzzing that catches many bugs,
so indiviudal commits may be buggy, but fixed before a release. So going forward,
I intend to import every (important) zstd release into the Kernel.
So, while it isn't ideal, updating in one big patch is the only patch I see forward.
Who is responsible for this code?
---------------------------------
I am. This patchset adds me as the maintainer for zstd. Previously, there was no tree
for zstd patches. Because of that, there were several patches that either got ignored,
or took a long time to merge, since it wasn't clear which tree should pick them up.
I'm officially stepping up as maintainer, and setting up my tree as the path through
which zstd patches get merged. I'll make sure that patches to the kernel zstd get
ported upstream, so they aren't erased when the next version update happens.
How is this code tested?
------------------------
I tested every caller of zstd on x86_64 (BtrFS, ZRAM, SquashFS, F2FS, Kernel,
InitRAMFS). I also tested Kernel & InitRAMFS on i386 and aarch64. I checked both
performance and correctness.
Also, thanks to many people in the community who have tested these patches locally.
If you have tested the patches, please reply with a Tested-By so I can collect them
for the PR I will send to Linus.
Lastly, this code will bake in linux-next before being merged into v5.16.
Why update to zstd-1.4.10 when zstd-1.5.0 has been released?
------------------------------------------------------------
This patchset has been outstanding since 2020, and zstd-1.4.10 was the latest
release when it was created. Since the update patch is automatically generated
from upstream, I could generate it from zstd-1.5.0. However, there were some
large stack usage regressions in zstd-1.5.0, and are only fixed in the latest
development branch. And the latest development branch contains some new code that
needs to bake in the fuzzer before I would feel comfortable releasing to the
kernel.
Once this patchset has been merged, and we've released zstd-1.5.1, we can update
the kernel to zstd-1.5.1, and exercise the update process.
You may notice that zstd-1.4.10 doesn't exist upstream. This release is an
artifical release based off of zstd-1.4.9, with some fixes for the kernel
backported from the development branch. I will tag the zstd-1.4.10 release after
this patchset is merged, so the Linux Kernel is running a known version of zstd
that can be debugged upstream.
Why was a wrapper API added?
----------------------------
The first versions of this patchset migrated the kernel to the upstream zstd
API. It first added a shim API that supported the new upstream API with the old
code, then updated callers to use the new shim API, then transitioned to the
new code and deleted the shim API. However, Cristoph Hellwig suggested that we
transition to a kernel style API, and hide zstd's upstream API behind that.
This is because zstd's upstream API is supports many other use cases, and does
not follow the kernel style guide, while the kernel API is focused on the
kernel's use cases, and follows the kernel style guide.
Where is the previous discussion?
---------------------------------
Links for the discussions of the previous versions of the patch set.
The largest changes in the design of the patchset are driven by the discussions
in V11, V5, and V1. Sorry for the mix of links, I couldn't find most of the the
threads on lkml.org.
V12: https://www.spinics.net/lists/linux-crypto/msg58189.html
V11: https://lore.kernel.org/linux-btrfs/20210430013157.747152-1-nickrterrell@gmail.com/
V10: https://lore.kernel.org/lkml/20210426234621.870684-2-nickrterrell@gmail.com/
V9: https://lore.kernel.org/linux-btrfs/20210330225112.496213-1-nickrterrell@gmail.com/
V8: https://lore.kernel.org/linux-f2fs-devel/20210326191859.1542272-1-nickrterrell@gmail.com/
V7: https://lkml.org/lkml/2020/12/3/1195
V6: https://lkml.org/lkml/2020/12/2/1245
V5: https://lore.kernel.org/linux-btrfs/20200916034307.2092020-1-nickrterrell@gmail.com/
V4: https://www.spinics.net/lists/linux-btrfs/msg105783.html
V3: https://lkml.org/lkml/2020/9/23/1074
V2: https://www.spinics.net/lists/linux-btrfs/msg105505.html
V1: https://lore.kernel.org/linux-btrfs/20200916034307.2092020-1-nickrterrell@gmail.com/
Signed-off-by: Nick Terrell <terrelln@fb.com>
Tested By: Paul Jones <paul@pauljones.id.au>
Tested-by: Oleksandr Natalenko <oleksandr@natalenko.name>
Tested-by: Sedat Dilek <sedat.dilek@gmail.com> # LLVM/Clang v13.0.0 on x86-64
Tested-by: Jean-Denis Girard <jd.girard@sysnux.pf>
-----BEGIN PGP SIGNATURE-----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=Xb18
-----END PGP SIGNATURE-----
Merge tag 'zstd-for-linus-v5.16' of git://github.com/terrelln/linux
Pull zstd update from Nick Terrell:
"Update to zstd-1.4.10.
Add myself as the maintainer of zstd and update the zstd version in
the kernel, which is now 4 years out of date, to a much more recent
zstd release. This includes bug fixes, much more extensive fuzzing,
and performance improvements. And generates the kernel zstd
automatically from upstream zstd, so it is easier to keep the zstd
verison up to date, and we don't fall so far out of date again.
This includes 5 commits that update the zstd library version:
- Adds a new kernel-style wrapper around zstd.
This wrapper API is functionally equivalent to the subset of the
current zstd API that is currently used. The wrapper API changes to
be kernel style so that the symbols don't collide with zstd's
symbols. The update to zstd-1.4.10 maintains the same API and
preserves the semantics, so that none of the callers need to be
updated. All callers are updated in the commit, because there are
zero functional changes.
- Adds an indirection for `lib/decompress_unzstd.c` so it doesn't
depend on the layout of `lib/zstd/` to include every source file.
This allows the next patch to be automatically generated.
- Imports the zstd-1.4.10 source code. This commit is automatically
generated from upstream zstd (https://github.com/facebook/zstd).
- Adds me (terrelln@fb.com) as the maintainer of `lib/zstd`.
- Fixes a newly added build warning for clang.
The discussion around this patchset has been pretty long, so I've
included a FAQ-style summary of the history of the patchset, and why
we are taking this approach.
Why do we need to update?
-------------------------
The zstd version in the kernel is based off of zstd-1.3.1, which is
was released August 20, 2017. Since then zstd has seen many bug fixes
and performance improvements. And, importantly, upstream zstd is
continuously fuzzed by OSS-Fuzz, and bug fixes aren't backported to
older versions. So the only way to sanely get these fixes is to keep
up to date with upstream zstd.
There are no known security issues that affect the kernel, but we need
to be able to update in case there are. And while there are no known
security issues, there are relevant bug fixes. For example the problem
with large kernel decompression has been fixed upstream for over 2
years [1]
Additionally the performance improvements for kernel use cases are
significant. Measured for x86_64 on my Intel i9-9900k @ 3.6 GHz:
- BtrFS zstd compression at levels 1 and 3 is 5% faster
- BtrFS zstd decompression+read is 15% faster
- SquashFS zstd decompression+read is 15% faster
- F2FS zstd compression+write at level 3 is 8% faster
- F2FS zstd decompression+read is 20% faster
- ZRAM decompression+read is 30% faster
- Kernel zstd decompression is 35% faster
- Initramfs zstd decompression+build is 5% faster
On top of this, there are significant performance improvements coming
down the line in the next zstd release, and the new automated update
patch generation will allow us to pull them easily.
How is the update patch generated?
----------------------------------
The first two patches are preparation for updating the zstd version.
Then the 3rd patch in the series imports upstream zstd into the
kernel. This patch is automatically generated from upstream. A script
makes the necessary changes and imports it into the kernel. The
changes are:
- Replace all libc dependencies with kernel replacements and rewrite
includes.
- Remove unncessary portability macros like: #if defined(_MSC_VER).
- Use the kernel xxhash instead of bundling it.
This automation gets tested every commit by upstream's continuous
integration. When we cut a new zstd release, we will submit a patch to
the kernel to update the zstd version in the kernel.
The automated process makes it easy to keep the kernel version of zstd
up to date. The current zstd in the kernel shares the guts of the
code, but has a lot of API and minor changes to work in the kernel.
This is because at the time upstream zstd was not ready to be used in
the kernel envrionment as-is. But, since then upstream zstd has
evolved to support being used in the kernel as-is.
Why are we updating in one big patch?
-------------------------------------
The 3rd patch in the series is very large. This is because it is
restructuring the code, so it both deletes the existing zstd, and
re-adds the new structure. Future updates will be directly
proportional to the changes in upstream zstd since the last import.
They will admittidly be large, as zstd is an actively developed
project, and has hundreds of commits between every release. However,
there is no other great alternative.
One option ruled out is to replay every upstream zstd commit. This is
not feasible for several reasons:
- There are over 3500 upstream commits since the zstd version in the
kernel.
- The automation to automatically generate the kernel update was only
added recently, so older commits cannot easily be imported.
- Not every upstream zstd commit builds.
- Only zstd releases are "supported", and individual commits may have
bugs that were fixed before a release.
Another option to reduce the patch size would be to first reorganize
to the new file structure, and then apply the patch. However, the
current kernel zstd is formatted with clang-format to be more
"kernel-like". But, the new method imports zstd as-is, without
additional formatting, to allow for closer correlation with upstream,
and easier debugging. So the patch wouldn't be any smaller.
It also doesn't make sense to import upstream zstd commit by commit
going forward. Upstream zstd doesn't support production use cases
running of the development branch. We have a lot of post-commit
fuzzing that catches many bugs, so indiviudal commits may be buggy,
but fixed before a release. So going forward, I intend to import every
(important) zstd release into the Kernel.
So, while it isn't ideal, updating in one big patch is the only patch
I see forward.
Who is responsible for this code?
---------------------------------
I am. This patchset adds me as the maintainer for zstd. Previously,
there was no tree for zstd patches. Because of that, there were
several patches that either got ignored, or took a long time to merge,
since it wasn't clear which tree should pick them up. I'm officially
stepping up as maintainer, and setting up my tree as the path through
which zstd patches get merged. I'll make sure that patches to the
kernel zstd get ported upstream, so they aren't erased when the next
version update happens.
How is this code tested?
------------------------
I tested every caller of zstd on x86_64 (BtrFS, ZRAM, SquashFS, F2FS,
Kernel, InitRAMFS). I also tested Kernel & InitRAMFS on i386 and
aarch64. I checked both performance and correctness.
Also, thanks to many people in the community who have tested these
patches locally.
Lastly, this code will bake in linux-next before being merged into
v5.16.
Why update to zstd-1.4.10 when zstd-1.5.0 has been released?
------------------------------------------------------------
This patchset has been outstanding since 2020, and zstd-1.4.10 was the
latest release when it was created. Since the update patch is
automatically generated from upstream, I could generate it from
zstd-1.5.0.
However, there were some large stack usage regressions in zstd-1.5.0,
and are only fixed in the latest development branch. And the latest
development branch contains some new code that needs to bake in the
fuzzer before I would feel comfortable releasing to the kernel.
Once this patchset has been merged, and we've released zstd-1.5.1, we
can update the kernel to zstd-1.5.1, and exercise the update process.
You may notice that zstd-1.4.10 doesn't exist upstream. This release
is an artifical release based off of zstd-1.4.9, with some fixes for
the kernel backported from the development branch. I will tag the
zstd-1.4.10 release after this patchset is merged, so the Linux Kernel
is running a known version of zstd that can be debugged upstream.
Why was a wrapper API added?
----------------------------
The first versions of this patchset migrated the kernel to the
upstream zstd API. It first added a shim API that supported the new
upstream API with the old code, then updated callers to use the new
shim API, then transitioned to the new code and deleted the shim API.
However, Cristoph Hellwig suggested that we transition to a kernel
style API, and hide zstd's upstream API behind that. This is because
zstd's upstream API is supports many other use cases, and does not
follow the kernel style guide, while the kernel API is focused on the
kernel's use cases, and follows the kernel style guide.
Where is the previous discussion?
---------------------------------
Links for the discussions of the previous versions of the patch set
below. The largest changes in the design of the patchset are driven by
the discussions in v11, v5, and v1. Sorry for the mix of links, I
couldn't find most of the the threads on lkml.org"
Link: https://lkml.org/lkml/2020/9/29/27 [1]
Link: https://www.spinics.net/lists/linux-crypto/msg58189.html [v12]
Link: https://lore.kernel.org/linux-btrfs/20210430013157.747152-1-nickrterrell@gmail.com/ [v11]
Link: https://lore.kernel.org/lkml/20210426234621.870684-2-nickrterrell@gmail.com/ [v10]
Link: https://lore.kernel.org/linux-btrfs/20210330225112.496213-1-nickrterrell@gmail.com/ [v9]
Link: https://lore.kernel.org/linux-f2fs-devel/20210326191859.1542272-1-nickrterrell@gmail.com/ [v8]
Link: https://lkml.org/lkml/2020/12/3/1195 [v7]
Link: https://lkml.org/lkml/2020/12/2/1245 [v6]
Link: https://lore.kernel.org/linux-btrfs/20200916034307.2092020-1-nickrterrell@gmail.com/ [v5]
Link: https://www.spinics.net/lists/linux-btrfs/msg105783.html [v4]
Link: https://lkml.org/lkml/2020/9/23/1074 [v3]
Link: https://www.spinics.net/lists/linux-btrfs/msg105505.html [v2]
Link: https://lore.kernel.org/linux-btrfs/20200916034307.2092020-1-nickrterrell@gmail.com/ [v1]
Signed-off-by: Nick Terrell <terrelln@fb.com>
Tested By: Paul Jones <paul@pauljones.id.au>
Tested-by: Oleksandr Natalenko <oleksandr@natalenko.name>
Tested-by: Sedat Dilek <sedat.dilek@gmail.com> # LLVM/Clang v13.0.0 on x86-64
Tested-by: Jean-Denis Girard <jd.girard@sysnux.pf>
* tag 'zstd-for-linus-v5.16' of git://github.com/terrelln/linux:
lib: zstd: Add cast to silence clang's -Wbitwise-instead-of-logical
MAINTAINERS: Add maintainer entry for zstd
lib: zstd: Upgrade to latest upstream zstd version 1.4.10
lib: zstd: Add decompress_sources.h for decompress_unzstd
lib: zstd: Add kernel-specific API
|
||
|
Alistair Popple
|
ab09243aa9 |
mm/migrate.c: remove MIGRATE_PFN_LOCKED
MIGRATE_PFN_LOCKED is used to indicate to migrate_vma_prepare() that a source page was already locked during migrate_vma_collect(). If it wasn't then the a second attempt is made to lock the page. However if the first attempt failed it's unlikely a second attempt will succeed, and the retry adds complexity. So clean this up by removing the retry and MIGRATE_PFN_LOCKED flag. Destination pages are also meant to have the MIGRATE_PFN_LOCKED flag set, but nothing actually checks that. Link: https://lkml.kernel.org/r/20211025041608.289017-1-apopple@nvidia.com Signed-off-by: Alistair Popple <apopple@nvidia.com> Reviewed-by: Ralph Campbell <rcampbell@nvidia.com> Acked-by: Felix Kuehling <Felix.Kuehling@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: Jerome Glisse <jglisse@redhat.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Zi Yan <ziy@nvidia.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Ben Skeggs <bskeggs@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
Nicholas Piggin
|
5d5e4522a7 |
printk: restore flushing of NMI buffers on remote CPUs after NMI backtraces
printk from NMI context relies on irq work being raised on the local CPU
to print to console. This can be a problem if the NMI was raised by a
lockup detector to print lockup stack and regs, because the CPU may not
enable irqs (because it is locked up).
Introduce printk_trigger_flush() that can be called another CPU to try
to get those messages to the console, call that where printk_safe_flush
was previously called.
Fixes:
|
||
|
Linus Torvalds
|
59a2ceeef6 |
Merge branch 'akpm' (patches from Andrew)
Merge more updates from Andrew Morton: "87 patches. Subsystems affected by this patch series: mm (pagecache and hugetlb), procfs, misc, MAINTAINERS, lib, checkpatch, binfmt, kallsyms, ramfs, init, codafs, nilfs2, hfs, crash_dump, signals, seq_file, fork, sysvfs, kcov, gdb, resource, selftests, and ipc" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (87 commits) ipc/ipc_sysctl.c: remove fallback for !CONFIG_PROC_SYSCTL ipc: check checkpoint_restore_ns_capable() to modify C/R proc files selftests/kselftest/runner/run_one(): allow running non-executable files virtio-mem: disallow mapping virtio-mem memory via /dev/mem kernel/resource: disallow access to exclusive system RAM regions kernel/resource: clean up and optimize iomem_is_exclusive() scripts/gdb: handle split debug for vmlinux kcov: replace local_irq_save() with a local_lock_t kcov: avoid enable+disable interrupts if !in_task() kcov: allocate per-CPU memory on the relevant node Documentation/kcov: define `ip' in the example Documentation/kcov: include types.h in the example sysv: use BUILD_BUG_ON instead of runtime check kernel/fork.c: unshare(): use swap() to make code cleaner seq_file: fix passing wrong private data seq_file: move seq_escape() to a header signal: remove duplicate include in signal.h crash_dump: remove duplicate include in crash_dump.h crash_dump: fix boolreturn.cocci warning hfs/hfsplus: use WARN_ON for sanity check ... |
||
Thomas Gleixner
|
723aca2085 |
mm/scatterlist: replace the !preemptible warning in sg_miter_stop()
sg_miter_stop() checks for disabled preemption before unmapping a page via kunmap_atomic(). The kernel doc mentions under context that preemption must be disabled if SG_MITER_ATOMIC is set. There is no active requirement for the caller to have preemption disabled before invoking sg_mitter_stop(). The sg_mitter_*() implementation itself has no such requirement. In fact, preemption is disabled by kmap_atomic() as part of sg_miter_next() and remains disabled as long as there is an active SG_MITER_ATOMIC mapping. This is a consequence of kmap_atomic() and not a requirement for sg_mitter_*() itself. The user chooses SG_MITER_ATOMIC because it uses the API in a context where blocking is not possible or blocking is possible but he chooses a lower weight mapping which is not available on all CPUs and so it might need less overhead to setup at a price that now preemption will be disabled. The kmap_atomic() implementation on PREEMPT_RT does not disable preemption. It simply disables CPU migration to ensure that the task remains on the same CPU while the caller remains preemptible. This in turn triggers the warning in sg_miter_stop() because preemption is allowed. The PREEMPT_RT and !PREEMPT_RT implementation of kmap_atomic() disable pagefaults as a requirement. It is sufficient to check for this instead of disabled preemption. Check for disabled pagefault handler in the SG_MITER_ATOMIC case. Remove the "preemption disabled" part from the kernel doc as the sg_milter*() implementation does not care. [bigeasy@linutronix.de: commit description] Link: https://lkml.kernel.org/r/20211015211409.cqopacv3pxdwn2ty@linutronix.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Alexey Dobriyan
|
839b395eb9 |
lib: uninline simple_strntoull() as well
Codegen become bloated again after simple_strntoull() introduction add/remove: 0/0 grow/shrink: 0/4 up/down: 0/-224 (-224) Function old new delta simple_strtoul 5 2 -3 simple_strtol 23 20 -3 simple_strtoull 119 15 -104 simple_strtoll 155 41 -114 Link: https://lkml.kernel.org/r/YVmlB9yY4lvbNKYt@localhost.localdomain Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Cc: Richard Fitzgerald <rf@opensource.cirrus.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
Imran Khan
|
0f68d45ef4 |
lib, stackdepot: add helper to print stack entries into buffer
To print stack entries into a buffer, users of stackdepot, first get a list of stack entries using stack_depot_fetch and then print this list into a buffer using stack_trace_snprint. Provide a helper in stackdepot for this purpose. Also change above mentioned users to use this helper. [imran.f.khan@oracle.com: fix build error] Link: https://lkml.kernel.org/r/20210915175321.3472770-4-imran.f.khan@oracle.com [imran.f.khan@oracle.com: export stack_depot_snprint() to modules] Link: https://lkml.kernel.org/r/20210916133535.3592491-4-imran.f.khan@oracle.com Link: https://lkml.kernel.org/r/20210915014806.3206938-4-imran.f.khan@oracle.com Signed-off-by: Imran Khan <imran.f.khan@oracle.com> Suggested-by: Vlastimil Babka <vbabka@suse.cz> Acked-by: Vlastimil Babka <vbabka@suse.cz> Acked-by: Jani Nikula <jani.nikula@intel.com> [i915] Cc: Alexander Potapenko <glider@google.com> Cc: Andrey Konovalov <andreyknvl@gmail.com> Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: David Airlie <airlied@linux.ie> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Maxime Ripard <mripard@kernel.org> Cc: Thomas Zimmermann <tzimmermann@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Imran Khan
|
505be48165 |
lib, stackdepot: add helper to print stack entries
To print a stack entries, users of stackdepot, first use stack_depot_fetch to get a list of stack entries and then use stack_trace_print to print this list. Provide a helper in stackdepot to print stack entries based on stackdepot handle. Also change above mentioned users to use this helper. Link: https://lkml.kernel.org/r/20210915014806.3206938-3-imran.f.khan@oracle.com Signed-off-by: Imran Khan <imran.f.khan@oracle.com> Suggested-by: Vlastimil Babka <vbabka@suse.cz> Acked-by: Vlastimil Babka <vbabka@suse.cz> Reviewed-by: Alexander Potapenko <glider@google.com> Cc: Andrey Konovalov <andreyknvl@gmail.com> Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: David Airlie <airlied@linux.ie> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Maxime Ripard <mripard@kernel.org> Cc: Thomas Zimmermann <tzimmermann@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Imran Khan
|
4d4712c1a4 |
lib, stackdepot: check stackdepot handle before accessing slabs
Patch series "lib, stackdepot: check stackdepot handle before accessing slabs", v2. PATCH-1: Checks validity of a stackdepot handle before proceeding to access stackdepot slab/objects. PATCH-2: Adds a helper in stackdepot, to allow users to print stack entries just by specifying the stackdepot handle. It also changes such users to use this new interface. PATCH-3: Adds a helper in stackdepot, to allow users to print stack entries into buffers just by specifying the stackdepot handle and destination buffer. It also changes such users to use this new interface. This patch (of 3): stack_depot_save allocates slabs that will be used for storing objects in future.If this slab allocation fails we may get to a situation where space allocation for a new stack_record fails, causing stack_depot_save to return 0 as handle. If user of this handle ends up invoking stack_depot_fetch with this handle value, current implementation of stack_depot_fetch will end up using slab from wrong index. To avoid this check handle value at the beginning. Link: https://lkml.kernel.org/r/20210915175321.3472770-1-imran.f.khan@oracle.com Link: https://lkml.kernel.org/r/20210915014806.3206938-1-imran.f.khan@oracle.com Link: https://lkml.kernel.org/r/20210915014806.3206938-2-imran.f.khan@oracle.com Signed-off-by: Imran Khan <imran.f.khan@oracle.com> Suggested-by: Vlastimil Babka <vbabka@suse.cz> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com> Cc: Alexander Potapenko <glider@google.com> Cc: Andrey Konovalov <andreyknvl@gmail.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Maxime Ripard <mripard@kernel.org> Cc: Thomas Zimmermann <tzimmermann@suse.de> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Nathan Chancellor
|
0a8ea23583 |
lib: zstd: Add cast to silence clang's -Wbitwise-instead-of-logical
A new warning in clang warns that there is an instance where boolean
expressions are being used with bitwise operators instead of logical
ones:
lib/zstd/decompress/huf_decompress.c:890:25: warning: use of bitwise '&' with boolean operands [-Wbitwise-instead-of-logical]
(BIT_reloadDStreamFast(&bitD1) == BIT_DStream_unfinished)
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
zstd does this frequently to help with performance, as logical operators
have branches whereas bitwise ones do not.
To fix this warning in other cases, the expressions were placed on
separate lines with the '&=' operator; however, this particular instance
was moved away from that so that it could be surrounded by LIKELY, which
is a macro for __builtin_expect(), to help with a performance
regression, according to upstream zstd pull #1973.
Aside from switching to logical operators, which is likely undesirable
in this instance, or disabling the warning outright, the solution is
casting one of the expressions to an integer type to make it clear to
clang that the author knows what they are doing. Add a cast to U32 to
silence the warning. The first U32 cast is to silence an instance of
-Wshorten-64-to-32 because __builtin_expect() returns long so it cannot
be moved.
Link: https://github.com/ClangBuiltLinux/linux/issues/1486
Link: https://github.com/facebook/zstd/pull/1973
Reported-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Nick Terrell <terrelln@fb.com>
|
||
|
Nick Terrell
|
e0c1b49f5b |
lib: zstd: Upgrade to latest upstream zstd version 1.4.10
Upgrade to the latest upstream zstd version 1.4.10. This patch is 100% generated from upstream zstd commit 20821a46f412 [0]. This patch is very large because it is transitioning from the custom kernel zstd to using upstream directly. The new zstd follows upstreams file structure which is different. Future update patches will be much smaller because they will only contain the changes from one upstream zstd release. As an aid for review I've created a commit [1] that shows the diff between upstream zstd as-is (which doesn't compile), and the zstd code imported in this patch. The verion of zstd in this patch is generated from upstream with changes applied by automation to replace upstreams libc dependencies, remove unnecessary portability macros, replace `/**` comments with `/*` comments, and use the kernel's xxhash instead of bundling it. The benefits of this patch are as follows: 1. Using upstream directly with automated script to generate kernel code. This allows us to update the kernel every upstream release, so the kernel gets the latest bug fixes and performance improvements, and doesn't get 3 years out of date again. The automation and the translated code are tested every upstream commit to ensure it continues to work. 2. Upgrades from a custom zstd based on 1.3.1 to 1.4.10, getting 3 years of performance improvements and bug fixes. On x86_64 I've measured 15% faster BtrFS and SquashFS decompression+read speeds, 35% faster kernel decompression, and 30% faster ZRAM decompression+read speeds. 3. Zstd-1.4.10 supports negative compression levels, which allow zstd to match or subsume lzo's performance. 4. Maintains the same kernel-specific wrapper API, so no callers have to be modified with zstd version updates. One concern that was brought up was stack usage. Upstream zstd had already removed most of its heavy stack usage functions, but I just removed the last functions that allocate arrays on the stack. I've measured the high water mark for both compression and decompression before and after this patch. Decompression is approximately neutral, using about 1.2KB of stack space. Compression levels up to 3 regressed from 1.4KB -> 1.6KB, and higher compression levels regressed from 1.5KB -> 2KB. We've added unit tests upstream to prevent further regression. I believe that this is a reasonable increase, and if it does end up causing problems, this commit can be cleanly reverted, because it only touches zstd. I chose the bulk update instead of replaying upstream commits because there have been ~3500 upstream commits since the 1.3.1 release, zstd wasn't ready to be used in the kernel as-is before a month ago, and not all upstream zstd commits build. The bulk update preserves bisectablity because bugs can be bisected to the zstd version update. At that point the update can be reverted, and we can work with upstream to find and fix the bug. Note that upstream zstd release 1.4.10 doesn't exist yet. I have cut a staging branch at 20821a46f412 [0] and will apply any changes requested to the staging branch. Once we're ready to merge this update I will cut a zstd release at the commit we merge, so we have a known zstd release in the kernel. The implementation of the kernel API is contained in zstd_compress_module.c and zstd_decompress_module.c. [0] |
||
|
Nick Terrell
|
2479b52389 |
lib: zstd: Add decompress_sources.h for decompress_unzstd
Adds decompress_sources.h which includes every .c file necessary for zstd decompression. This is used in decompress_unzstd.c so the internal structure of the library isn't exposed. This allows us to upgrade the zstd library version without modifying any callers. Instead we just need to update decompress_sources.h. Signed-off-by: Nick Terrell <terrelln@fb.com> Tested By: Paul Jones <paul@pauljones.id.au> Tested-by: Oleksandr Natalenko <oleksandr@natalenko.name> Tested-by: Sedat Dilek <sedat.dilek@gmail.com> # LLVM/Clang v13.0.0 on x86-64 Tested-by: Jean-Denis Girard <jd.girard@sysnux.pf> |
||
|
Nick Terrell
|
cf30f6a5f0 |
lib: zstd: Add kernel-specific API
This patch: - Moves `include/linux/zstd.h` -> `include/linux/zstd_lib.h` - Updates modified zstd headers to yearless copyright - Adds a new API in `include/linux/zstd.h` that is functionally equivalent to the in-use subset of the current API. Functions are renamed to avoid symbol collisions with zstd, to make it clear it is not the upstream zstd API, and to follow the kernel style guide. - Updates all callers to use the new API. There are no functional changes in this patch. Since there are no functional change, I felt it was okay to update all the callers in a single patch. Once the API is approved, the callers are mechanically changed. This patch is preparing for the 3rd patch in this series, which updates zstd to version 1.4.10. Since the upstream zstd API is no longer exposed to callers, the update can happen transparently. Signed-off-by: Nick Terrell <terrelln@fb.com> Tested By: Paul Jones <paul@pauljones.id.au> Tested-by: Oleksandr Natalenko <oleksandr@natalenko.name> Tested-by: Sedat Dilek <sedat.dilek@gmail.com> # LLVM/Clang v13.0.0 on x86-64 Tested-by: Jean-Denis Girard <jd.girard@sysnux.pf> |
||
|
Linus Torvalds
|
1e9ed9360f |
Kbuild updates for v5.16
- Remove the global -isystem compiler flag, which was made possible by
the introduction of <linux/stdarg.h>
- Improve the Kconfig help to print the location in the top menu level
- Fix "FORCE prerequisite is missing" build warning for sparc
- Add new build targets, tarzst-pkg and perf-tarzst-src-pkg, which generate
a zstd-compressed tarball
- Prevent gen_init_cpio tool from generating a corrupted cpio when
KBUILD_BUILD_TIMESTAMP is set to 2106-02-07 or later
- Misc cleanups
-----BEGIN PGP SIGNATURE-----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=ATFN
-----END PGP SIGNATURE-----
Merge tag 'kbuild-v5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild updates from Masahiro Yamada:
- Remove the global -isystem compiler flag, which was made possible by
the introduction of <linux/stdarg.h>
- Improve the Kconfig help to print the location in the top menu level
- Fix "FORCE prerequisite is missing" build warning for sparc
- Add new build targets, tarzst-pkg and perf-tarzst-src-pkg, which
generate a zstd-compressed tarball
- Prevent gen_init_cpio tool from generating a corrupted cpio when
KBUILD_BUILD_TIMESTAMP is set to 2106-02-07 or later
- Misc cleanups
* tag 'kbuild-v5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (28 commits)
kbuild: use more subdir- for visiting subdirectories while cleaning
sh: remove meaningless archclean line
initramfs: Check timestamp to prevent broken cpio archive
kbuild: split DEBUG_CFLAGS out to scripts/Makefile.debug
gen_init_cpio: add static const qualifiers
kbuild: Add make tarzst-pkg build option
scripts: update the comments of kallsyms support
sparc: Add missing "FORCE" target when using if_changed
kconfig: refactor conf_touch_dep()
kconfig: refactor conf_write_dep()
kconfig: refactor conf_write_autoconf()
kconfig: add conf_get_autoheader_name()
kconfig: move sym_escape_string_value() to confdata.c
kconfig: refactor listnewconfig code
kconfig: refactor conf_write_symbol()
kconfig: refactor conf_write_heading()
kconfig: remove 'const' from the return type of sym_escape_string_value()
kconfig: rename a variable in the lexer to a clearer name
kconfig: narrow the scope of variables in the lexer
kconfig: Create links to main menu items in search
...
|
||
|
Linus Torvalds
|
512b7931ad |
Merge branch 'akpm' (patches from Andrew)
Merge misc updates from Andrew Morton: "257 patches. Subsystems affected by this patch series: scripts, ocfs2, vfs, and mm (slab-generic, slab, slub, kconfig, dax, kasan, debug, pagecache, gup, swap, memcg, pagemap, mprotect, mremap, iomap, tracing, vmalloc, pagealloc, memory-failure, hugetlb, userfaultfd, vmscan, tools, memblock, oom-kill, hugetlbfs, migration, thp, readahead, nommu, ksm, vmstat, madvise, memory-hotplug, rmap, zsmalloc, highmem, zram, cleanups, kfence, and damon)" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (257 commits) mm/damon: remove return value from before_terminate callback mm/damon: fix a few spelling mistakes in comments and a pr_debug message mm/damon: simplify stop mechanism Docs/admin-guide/mm/pagemap: wordsmith page flags descriptions Docs/admin-guide/mm/damon/start: simplify the content Docs/admin-guide/mm/damon/start: fix a wrong link Docs/admin-guide/mm/damon/start: fix wrong example commands mm/damon/dbgfs: add adaptive_targets list check before enable monitor_on mm/damon: remove unnecessary variable initialization Documentation/admin-guide/mm/damon: add a document for DAMON_RECLAIM mm/damon: introduce DAMON-based Reclamation (DAMON_RECLAIM) selftests/damon: support watermarks mm/damon/dbgfs: support watermarks mm/damon/schemes: activate schemes based on a watermarks mechanism tools/selftests/damon: update for regions prioritization of schemes mm/damon/dbgfs: support prioritization weights mm/damon/vaddr,paddr: support pageout prioritization mm/damon/schemes: prioritize regions within the quotas mm/damon/selftests: support schemes quotas mm/damon/dbgfs: support quotas of schemes ... |
||
|
Marco Elver
|
4f612ed3f7 |
kfence: default to dynamic branch instead of static keys mode
We have observed that on very large machines with newer CPUs, the static key/branch switching delay is on the order of milliseconds. This is due to the required broadcast IPIs, which simply does not scale well to hundreds of CPUs (cores). If done too frequently, this can adversely affect tail latencies of various workloads. One workaround is to increase the sample interval to several seconds, while decreasing sampled allocation coverage, but the problem still exists and could still increase tail latencies. As already noted in the Kconfig help text, there are trade-offs: at lower sample intervals the dynamic branch results in better performance; however, at very large sample intervals, the static keys mode can result in better performance -- careful benchmarking is recommended. Our initial benchmarking showed that with large enough sample intervals and workloads stressing the allocator, the static keys mode was slightly better. Evaluating and observing the possible system-wide side-effects of the static-key-switching induced broadcast IPIs, however, was a blind spot (in particular on large machines with 100s of cores). Therefore, a major downside of the static keys mode is, unfortunately, that it is hard to predict performance on new system architectures and topologies, but also making conclusions about performance of new workloads based on a limited set of benchmarks. Most distributions will simply select the defaults, while targeting a large variety of different workloads and system architectures. As such, the better default is CONFIG_KFENCE_STATIC_KEYS=n, and re-enabling it is only recommended after careful evaluation. For reference, on x86-64 the condition in kfence_alloc() generates exactly 2 instructions in the kmem_cache_alloc() fast-path: | ... | cmpl $0x0,0x1a8021c(%rip) # ffffffff82d560d0 <kfence_allocation_gate> | je ffffffff812d6003 <kmem_cache_alloc+0x243> | ... which, given kfence_allocation_gate is infrequently modified, should be well predicted by most CPUs. Link: https://lkml.kernel.org/r/20211019102524.2807208-2-elver@google.com Signed-off-by: Marco Elver <elver@google.com> Cc: Alexander Potapenko <glider@google.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Jann Horn <jannh@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Marco Elver
|
f39f21b3dd |
stacktrace: move filter_irq_stacks() to kernel/stacktrace.c
filter_irq_stacks() has little to do with the stackdepot implementation, except that it is usually used by users (such as KASAN) of stackdepot to reduce the stack trace. However, filter_irq_stacks() itself is not useful without a stack trace as obtained by stack_trace_save() and friends. Therefore, move filter_irq_stacks() to kernel/stacktrace.c, so that new users of filter_irq_stacks() do not have to start depending on STACKDEPOT only for filter_irq_stacks(). Link: https://lkml.kernel.org/r/20210923104803.2620285-1-elver@google.com Signed-off-by: Marco Elver <elver@google.com> Acked-by: Dmitry Vyukov <dvyukov@google.com> Cc: Alexander Potapenko <glider@google.com> Cc: Jann Horn <jannh@google.com> Cc: Aleksandr Nogikh <nogikh@google.com> Cc: Taras Madan <tarasmadan@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
David Hildenbrand
|
50f9481ed9 |
mm/memory_hotplug: remove CONFIG_MEMORY_HOTPLUG_SPARSE
CONFIG_MEMORY_HOTPLUG depends on CONFIG_SPARSEMEM, so there is no need for CONFIG_MEMORY_HOTPLUG_SPARSE anymore; adjust all instances to use CONFIG_MEMORY_HOTPLUG and remove CONFIG_MEMORY_HOTPLUG_SPARSE. Link: https://lkml.kernel.org/r/20210929143600.49379-3-david@redhat.com Signed-off-by: David Hildenbrand <david@redhat.com> Acked-by: Shuah Khan <skhan@linuxfoundation.org> [kselftest] Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Oscar Salvador <osalvador@suse.de> Cc: Alex Shi <alexs@kernel.org> Cc: Andy Lutomirski <luto@kernel.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jason Wang <jasowang@redhat.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Mike Rapoport <rppt@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: "Rafael J. Wysocki" <rafael@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
Mike Rapoport
|
4421cca0a3 |
memblock: use memblock_free for freeing virtual pointers
Rename memblock_free_ptr() to memblock_free() and use memblock_free()
when freeing a virtual pointer so that memblock_free() will be a
counterpart of memblock_alloc()
The callers are updated with the below semantic patch and manual
addition of (void *) casting to pointers that are represented by
unsigned long variables.
@@
identifier vaddr;
expression size;
@@
(
- memblock_phys_free(__pa(vaddr), size);
+ memblock_free(vaddr, size);
|
- memblock_free_ptr(vaddr, size);
+ memblock_free(vaddr, size);
)
[sfr@canb.auug.org.au: fixup]
Link: https://lkml.kernel.org/r/20211018192940.3d1d532f@canb.auug.org.au
Link: https://lkml.kernel.org/r/20210930185031.18648-7-rppt@kernel.org
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Juergen Gross <jgross@suse.com>
Cc: Shahab Vahedi <Shahab.Vahedi@synopsys.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
||
|
Mike Rapoport
|
3ecc68349b |
memblock: rename memblock_free to memblock_phys_free
Since memblock_free() operates on a physical range, make its name
reflect it and rename it to memblock_phys_free(), so it will be a
logical counterpart to memblock_phys_alloc().
The callers are updated with the below semantic patch:
@@
expression addr;
expression size;
@@
- memblock_free(addr, size);
+ memblock_phys_free(addr, size);
Link: https://lkml.kernel.org/r/20210930185031.18648-6-rppt@kernel.org
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Juergen Gross <jgross@suse.com>
Cc: Shahab Vahedi <Shahab.Vahedi@synopsys.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
||
|
Mike Rapoport
|
fa27717110 |
memblock: drop memblock_free_early_nid() and memblock_free_early()
memblock_free_early_nid() is unused and memblock_free_early() is an alias for memblock_free(). Replace calls to memblock_free_early() with calls to memblock_free() and remove memblock_free_early() and memblock_free_early_nid(). Link: https://lkml.kernel.org/r/20210930185031.18648-4-rppt@kernel.org Signed-off-by: Mike Rapoport <rppt@linux.ibm.com> Cc: Christophe Leroy <christophe.leroy@csgroup.eu> Cc: Juergen Gross <jgross@suse.com> Cc: Shahab Vahedi <Shahab.Vahedi@synopsys.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
Changcheng Deng
|
34b46efd6e |
lib/test_vmalloc.c: use swap() to make code cleaner
Use swap() in order to make code cleaner. Issue found by coccinelle. Link: https://lkml.kernel.org/r/20211028111443.15744-1-deng.changcheng@zte.com.cn Signed-off-by: Changcheng Deng <deng.changcheng@zte.com.cn> Reported-by: Zeal Robot <zealci@zte.com.cn> Reviewed-by: Uladzislau Rezki (Sony) <urezki@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Kees Cook
|
d73dad4eb5 |
kasan: test: bypass __alloc_size checks
Intentional overflows, as performed by the KASAN tests, are detected at compile time[1] (instead of only at run-time) with the addition of __alloc_size. Fix this by forcing the compiler into not being able to trust the size used following the kmalloc()s. [1] https://lore.kernel.org/lkml/20211005184717.65c6d8eb39350395e387b71f@linux-foundation.org Link: https://lkml.kernel.org/r/20211006181544.1670992-1-keescook@chromium.org Signed-off-by: Kees Cook <keescook@chromium.org> Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com> Cc: Alexander Potapenko <glider@google.com> Cc: Andrey Konovalov <andreyknvl@gmail.com> Cc: Dmitry Vyukov <dvyukov@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Peter Collingbourne
|
758cabae31 |
kasan: test: add memcpy test that avoids out-of-bounds write
With HW tag-based KASAN, error checks are performed implicitly by the load and store instructions in the memcpy implementation. A failed check results in tag checks being disabled and execution will keep going. As a result, under HW tag-based KASAN, prior to commit |
||
|
Marco Elver
|
11ac25c62c |
lib/stackdepot: introduce __stack_depot_save()
Add __stack_depot_save(), which provides more fine-grained control over stackdepot's memory allocation behaviour, in case stackdepot runs out of "stack slabs". Normally stackdepot uses alloc_pages() in case it runs out of space; passing can_alloc==false to __stack_depot_save() prohibits this, at the cost of more likely failure to record a stack trace. Link: https://lkml.kernel.org/r/20210913112609.2651084-4-elver@google.com Signed-off-by: Marco Elver <elver@google.com> Tested-by: Shuah Khan <skhan@linuxfoundation.org> Acked-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Reviewed-by: Andrey Konovalov <andreyknvl@gmail.com> Cc: Alexander Potapenko <glider@google.com> Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: "Gustavo A. R. Silva" <gustavoars@kernel.org> Cc: Lai Jiangshan <jiangshanlai@gmail.com> Cc: Taras Madan <tarasmadan@google.com> Cc: Tejun Heo <tj@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vijayanand Jitta <vjitta@codeaurora.org> Cc: Vinayak Menon <vinmenon@codeaurora.org> Cc: Walter Wu <walter-zh.wu@mediatek.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Marco Elver
|
7f2b8818ea |
lib/stackdepot: remove unused function argument
alloc_flags in depot_alloc_stack() is no longer used; remove it. Link: https://lkml.kernel.org/r/20210913112609.2651084-3-elver@google.com Signed-off-by: Marco Elver <elver@google.com> Tested-by: Shuah Khan <skhan@linuxfoundation.org> Acked-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Reviewed-by: Andrey Konovalov <andreyknvl@gmail.com> Cc: Alexander Potapenko <glider@google.com> Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: "Gustavo A. R. Silva" <gustavoars@kernel.org> Cc: Lai Jiangshan <jiangshanlai@gmail.com> Cc: Taras Madan <tarasmadan@google.com> Cc: Tejun Heo <tj@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vijayanand Jitta <vjitta@codeaurora.org> Cc: Vinayak Menon <vinmenon@codeaurora.org> Cc: Walter Wu <walter-zh.wu@mediatek.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Linus Torvalds
|
95faf6ba65 |
Driver core changes for 5.16-rc1
Here is the big set of driver core changes for 5.16-rc1.
All of these have been in linux-next for a while now with no reported
problems.
Included in here are:
- big update and cleanup of the sysfs abi documentation files
and scripts from Mauro. We are almost at the place where we
can properly check that the running kernel's sysfs abi is
documented fully.
- firmware loader updates
- dyndbg updates
- kernfs cleanups and fixes from Christoph
- device property updates
- component fix
- other minor driver core cleanups and fixes
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCYYPbjQ8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ync9gCfXKMUI1GAnCfJWAwTdTcd18q5akoAoMw32/AH
0yh5TjAWFyFd7xz5d7qs
=itsC
-----END PGP SIGNATURE-----
Merge tag 'driver-core-5.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core updates from Greg KH:
"Here is the big set of driver core changes for 5.16-rc1.
All of these have been in linux-next for a while now with no reported
problems.
Included in here are:
- big update and cleanup of the sysfs abi documentation files and
scripts from Mauro. We are almost at the place where we can
properly check that the running kernel's sysfs abi is documented
fully.
- firmware loader updates
- dyndbg updates
- kernfs cleanups and fixes from Christoph
- device property updates
- component fix
- other minor driver core cleanups and fixes"
* tag 'driver-core-5.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (122 commits)
device property: Drop redundant NULL checks
x86/build: Tuck away built-in firmware under FW_LOADER
vmlinux.lds.h: wrap built-in firmware support under FW_LOADER
firmware_loader: move struct builtin_fw to the only place used
x86/microcode: Use the firmware_loader built-in API
firmware_loader: remove old DECLARE_BUILTIN_FIRMWARE()
firmware_loader: formalize built-in firmware API
component: do not leave master devres group open after bind
dyndbg: refine verbosity 1-4 summary-detail
gpiolib: acpi: Replace custom code with device_match_acpi_handle()
i2c: acpi: Replace custom function with device_match_acpi_handle()
driver core: Provide device_match_acpi_handle() helper
dyndbg: fix spurious vNpr_info change
dyndbg: no vpr-info on empty queries
dyndbg: vpr-info on remove-module complete, not starting
device property: Add missed header in fwnode.h
Documentation: dyndbg: Improve cli param examples
dyndbg: Remove support for ddebug_query param
dyndbg: make dyndbg a known cli param
dyndbg: show module in vpr-info in dd-exec-queries
...
|
||
Guenter Roeck
|
5c4e0a21fa |
string: uninline memcpy_and_pad
When building m68k:allmodconfig, recent versions of gcc generate the
following error if the length of UTS_RELEASE is less than 8 bytes.
In function 'memcpy_and_pad',
inlined from 'nvmet_execute_disc_identify' at
drivers/nvme/target/discovery.c:268:2: arch/m68k/include/asm/string.h:72:25: error:
'__builtin_memcpy' reading 8 bytes from a region of size 7
Discussions around the problem suggest that this only happens if an
architecture does not provide strlen(), if -ffreestanding is provided as
compiler option, and if CONFIG_FORTIFY_SOURCE=n. All of this is the case
for m68k. The exact reasons are unknown, but seem to be related to the
ability of the compiler to evaluate the return value of strlen() and
the resulting execution flow in memcpy_and_pad(). It would be possible
to work around the problem by using sizeof(UTS_RELEASE) instead of
strlen(UTS_RELEASE), but that would only postpone the problem until the
function is called in a similar way. Uninline memcpy_and_pad() instead
to solve the problem for good.
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|