IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
Xommit ac5637611(genirq: Unmask oneshot irqs when thread was not woken)
fails to unmask when a !IRQ_ONESHOT threaded handler is handled by
handle_level_irq.
This happens because thread_mask is or'ed unconditionally in
irq_wake_thread(), but for !IRQ_ONESHOT interrupts never cleared. So
the check for !desc->thread_active fails and keeps the interrupt
disabled.
Keep the thread_mask zero for !IRQ_ONESHOT interrupts.
Document the thread_mask magic while at it.
Reported-and-tested-by: Sven Joachim <svenjoac@gmx.de>
Reported-and-tested-by: Stefan Lippers-Hollmann <s.l-h@gmx.de>
Cc: stable@vger.kernel.org
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The two invoke_softirq() variants are identical except for a single
line. So move the #ifdef __ARCH_IRQ_EXIT_IRQS_DISABLED inside one of
the functions and get rid of the other one.
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
In 2008, commit 0c5d1eb77a8be ("genirq: record trigger type") modified the
way set_irq_type() handles the 'no trigger' condition. However, this has
an adverse effect on PCMCIA support on Intel StrongARM and probably PXA
platforms.
PCMCIA has several status signals on the socket which can trigger
interrupts; some of these status signals depend on the card's mode
(whether it is configured in memory or IO mode). For example, cards have
a 'Ready/IRQ' signal: in memory mode, this provides an indication to
PCMCIA that the card has finished its power up initialization. In IO
mode, it provides the device interrupt signal. Other status signals
switch between on-board battery status and loud speaker output.
In classical PCMCIA implementations, where you have a specific socket
controller, the controller provides a method to mask interrupts from the
socket, and importantly ignore any state transitions on the pins which
correspond with interrupts once masked. This masking prevents unwanted
events caused by the removal and application of socket power being
forwarded.
However, on platforms where there is no socket controller, the PCMCIA
status and interrupt signals are routed to standard edge-triggered GPIOs.
These GPIOs can be configured to interrupt on rising edge, falling edge,
or never. This is where the problems start.
Edge triggered interrupts are required to record events while disabled via
the usual methods of {free,request,disable,enable}_irq() to prevent
problems with dropped interrupts (eg, the 8390 driver uses disable_irq()
to defer the delivery of interrupts). As a result, these interfaces can
not be used to implement the desired behaviour.
The side effect of this is that if the 'Ready/IRQ' GPIO is disabled via
disable_irq() on suspend, and enabled via enable_irq() after resume, we
will record the state transitions caused by powering events as valid
interrupts, and foward them to the card driver, which may attempt to
access a card which is not powered up.
This leads delays resume while drivers spin in their interrupt handlers,
and complaints from drivers before they realize what's happened.
Moreover, in the case of the 'Ready/IRQ' signal, this is requested and
freed by the card driver itself; the PCMCIA core has no idea whether the
interrupt is requested, and, therefore, whether a call to disable_irq()
would be valid. (We tried this around 2.4.17 / 2.5.1 kernel era, and
ended up throwing it out because of this problem.)
Therefore, it was decided back in around 2002 to disable the edge
triggering instead, resulting in all state transitions on the GPIO being
ignored. That's what we actually need the hardware to do.
The commit above changes this behaviour; it explicitly prevents the 'no
trigger' state being selected.
The reason that request_irq() does not accept the 'no trigger' state is
for compatibility with existing drivers which do not provide their desired
triggering configuration. The set_irq_type() function is 'new' and not
used by non-trigger aware drivers.
Therefore, revert this change, and restore previously working platforms
back to their former state.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Cc: linux@arm.linux.org.uk
Cc: Ingo Molnar <mingo@elte.hu>
Cc: stable@vger.kernel.org
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
check_hung_uninterruptible_tasks()->rcu_lock_break() introduced by
"softlockup: check all tasks in hung_task" commit ce9dbe24 looks
absolutely wrong.
- rcu_lock_break() does put_task_struct(). If the task has exited
it is not safe to even read its ->state, nothing protects this
task_struct.
- The TASK_DEAD checks are wrong too. Contrary to the comment, we
can't use it to check if the task was unhashed. It can be unhashed
without TASK_DEAD, or it can be valid with TASK_DEAD.
For example, an autoreaping task can do release_task(current)
long before it sets TASK_DEAD in do_exit().
Or, a zombie task can have ->state == TASK_DEAD but release_task()
was not called, and in this case we must not break the loop.
Change this code to check pid_alive() instead, and do this before we drop
the reference to the task_struct.
Note: while_each_thread() under rcu_read_lock() is not really safe, it can
livelock. This will be fixed later, but fortunately in this case the
"max_count" logic saves us anyway.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Acked-by: Mandeep Singh Baines <msb@google.com>
Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Previously it was (ab)used by utrace. Then it was wrongly used by the
scheduler code.
Currently it is not used, kill it before it finds the new erroneous user.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Now that CLONE_VFORK is killable, coredump_wait() no longer needs
complete_vfork_done(). zap_threads() should find and kill all tasks with
the same ->mm, this includes our parent if ->vfork_done is set.
mm_release() becomes the only caller, unexport complete_vfork_done().
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Make vfork() killable.
Change do_fork(CLONE_VFORK) to do wait_for_completion_killable(). If it
fails we do not return to the user-mode and never touch the memory shared
with our child.
However, in this case we should clear child->vfork_done before return, we
use task_lock() in do_fork()->wait_for_vfork_done() and
complete_vfork_done() to serialize with each other.
Note: now that we use task_lock() we don't really need completion, we
could turn task->vfork_done into "task_struct *wake_up_me" but this needs
some complications.
NOTE: this and the next patches do not affect in-kernel users of
CLONE_VFORK, kernel threads run with all signals ignored including
SIGKILL/SIGSTOP.
However this is obviously the user-visible change. Not only a fatal
signal can kill the vforking parent, a sub-thread can do execve or
exit_group() and kill the thread sleeping in vfork().
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
No functional changes.
Move the clear-and-complete-vfork_done code into the new trivial helper,
complete_vfork_done().
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
register_kprobe() aborts if the address of the new request falls in a
prohibited area (such as ftrace pouch, __kprobes annotated functions,
non-kernel text addresses, jump label text). We however don't return the
right error on this abort, resulting in a silent failure - incorrect
adding/reporting of kprobes ('perf probe do_fork+18' or 'perf probe
mcount' for instance).
In V2 we are incorporating Masami Hiramatsu's feedback.
This patch fixes it by returning -EINVAL upon failure.
While we are here, rename the label used for exit to be more appropriate.
Signed-off-by: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Signed-off-by: Prashanth K Nageshappa <prashanth@linux.vnet.ibm.com>
Acked-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Jason Baron <jbaron@redhat.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Since commit 04c6862c055f ("kmsg_dump: add kmsg_dump() calls to the
reboot, halt, poweroff and emergency_restart paths"), kmsg_dump() gets
run on normal paths including poweroff and reboot.
This is less than ideal given pstore implementations that can only
represent single backtraces, since a reboot may overwrite a stored oops
before it's been picked up by userspace. In addition, some pstore
backends may have low performance and provide a significant delay in
reboot as a result.
This patch adds a printk.always_kmsg_dump kernel parameter (which can also
be changed from userspace). Without it, the code will only be run on
failure paths rather than on normal paths. The option can be enabled in
environments where there's a desire to attempt to audit whether or not a
reboot was cleanly requested or not.
Signed-off-by: Matthew Garrett <mjg@redhat.com>
Acked-by: Seiji Aguchi <seiji.aguchi@hds.com>
Cc: Seiji Aguchi <seiji.aguchi@hds.com>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Marco Stornelli <marco.stornelli@gmail.com>
Cc: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Vivek Goyal <vgoyal@redhat.com>
Cc: Don Zickus <dzickus@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
With branch stack sampling, it is possible to filter by priv levels.
In system-wide mode, that means it is possible to capture only user
level branches. The builtin SW LBR filter needs to disassemble code
based on LBR captured addresses. For that, it needs to know the task
the addresses are associated with. Because of context switches, the
content of the branch stack buffer may contain addresses from
different tasks.
We need a callback on context switch to either flush the branch stack
or save it. This patch adds a new callback in struct pmu which is called
during context switches. The callback is called only when necessary.
That is when a system-wide context has, at least, one event which
uses PERF_SAMPLE_BRANCH_STACK. The callback is never called for
per-thread context.
In this version, the Intel x86 code simply flushes (resets) the LBR
on context switches (fills it with zeroes). Those zeroed branches are
then filtered out by the SW filter.
Signed-off-by: Stephane Eranian <eranian@google.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1328826068-11713-11-git-send-email-eranian@google.com
Signed-off-by: Ingo Molnar <mingo@elte.hu>
This patch adds the ability to sample taken branches to the
perf_event interface.
The ability to capture taken branches is very useful for all
sorts of analysis. For instance, basic block profiling, call
counts, statistical call graph.
This new capability requires hardware assist and as such may
not be available on all HW platforms. On Intel x86 it is
implemented on top of the Last Branch Record (LBR) facility.
To enable taken branches sampling, the PERF_SAMPLE_BRANCH_STACK
bit must be set in attr->sample_type.
Sampled taken branches may be filtered by type and/or priv
levels.
The patch adds a new field, called branch_sample_type, to the
perf_event_attr structure. It contains a bitmask of filters
to apply to the sampled taken branches.
Filters may be implemented in HW. If the HW filter does not exist
or is not good enough, some arch may also implement a SW filter.
The following generic filters are currently defined:
- PERF_SAMPLE_USER
only branches whose targets are at the user level
- PERF_SAMPLE_KERNEL
only branches whose targets are at the kernel level
- PERF_SAMPLE_HV
only branches whose targets are at the hypervisor level
- PERF_SAMPLE_ANY
any type of branches (subject to priv levels filters)
- PERF_SAMPLE_ANY_CALL
any call branches (may incl. syscall on some arch)
- PERF_SAMPLE_ANY_RET
any return branches (may incl. syscall returns on some arch)
- PERF_SAMPLE_IND_CALL
indirect call branches
Obviously filter may be combined. The priv level bits are optional.
If not provided, the priv level of the associated event are used. It
is possible to collect branches at a priv level different from the
associated event. Use of kernel, hv priv levels is subject to permissions
and availability (hv).
The number of taken branch records present in each sample may vary based
on HW, the type of sampled branches, the executed code. Therefore
each sample contains the number of taken branches it contains.
Signed-off-by: Stephane Eranian <eranian@google.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1328826068-11713-2-git-send-email-eranian@google.com
Signed-off-by: Ingo Molnar <mingo@elte.hu>
This patch removes all the references in the code about the TIF_FREEZE
flag removed by commit a3201227f803ad7fd43180c5195dbe5a2bf998aa
freezer: make freezing() test freeze conditions in effect instead of TIF_FREEZE
There still are some references to TIF_FREEZE in
Documentation/power/freezing-of-tasks.txt, but it looks like that
documentation needs more thorough work to reflect how the new
freezer works, and hence merely removing the references to TIF_FREEZE
won't really help. So I have not touched that part in this patch.
Suggested-by: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com>
Signed-off-by: Marcos Paulo de Souza <marcos.mage@gmail.com>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
If create_basic_memory_bitmaps() fails, usermodehelpers are not re-enabled
before returning. Fix this. And while at it, reword the goto labels so that
they look more meaningful.
Signed-off-by: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com>
Cc: stable@vger.kernel.org
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Pulling latest branches from Ingo:
* 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
memblock: Fix size aligning of memblock_alloc_base_nid()
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf probe: Ensure offset provided is not greater than function length without DWARF info too
perf tools: Ensure comm string is properly terminated
perf probe: Ensure offset provided is not greater than function length
perf evlist: Return first evsel for non-sample event on old kernel
perf/hwbp: Fix a possible memory leak
* 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
CPU hotplug, cpusets, suspend: Don't touch cpusets during suspend/resume
Pass nice as a value to proc_sched_autogroup_set_nice().
No side effect is expected, and the variable err will be overwritten with
the return value.
Signed-off-by: Hiroshi Shimamoto <h-shimamoto@ct.jp.nec.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/4F45FBB7.5090607@ct.jp.nec.com
Signed-off-by: Ingo Molnar <mingo@elte.hu>
This patch (as1519) fixes a bug in the block layer's disk-events
polling. The polling is done by a work routine queued on the
system_nrt_wq workqueue. Since that workqueue isn't freezable, the
polling continues even in the middle of a system sleep transition.
Obviously, polling a suspended drive for media changes and such isn't
a good thing to do; in the case of USB mass-storage devices it can
lead to real problems requiring device resets and even re-enumeration.
The patch fixes things by creating a new system-wide, non-reentrant,
freezable workqueue and using it for disk-events polling.
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
CC: <stable@kernel.org>
Acked-by: Tejun Heo <tj@kernel.org>
Acked-by: Rafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
As ftrace_dump() (called by ftrace_dump_on_oops) disables interrupts
as it dumps its output to the console, it can keep interrupts disabled
for long periods of time. This is likely to trigger the NMI watchdog,
and it can disrupt the output of critical data.
Add a touch_nmi_watchdog() to each event that is written to the screen
to keep the NMI watchdog from affecting the output.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Per cgroup load-balance has numerous problems, chief amongst them that
there is no real sane order in them. So stop pretending it makes sense
and enqueue all tasks on a single list.
This also allows us to more easily fix the fwd progress issue
uncovered by the lock-break stuff. Rotate the list on failure to
migreate and limit the total iterations to nr_running (which with
releasing the lock isn't strictly accurate but close enough).
Also add a filter that skips very light tasks on the first attempt
around the list, this attempts to avoid shooting whole cgroups around
without affecting over balance.
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: pjt@google.com
Link: http://lkml.kernel.org/n/tip-tx8yqydc7eimgq7i4rkc3a4g@git.kernel.org
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Passing large sets of similar arguments all around the load-balancer
gets tiresom when you want to modify something. Stick them all in a
helper structure and pass the structure around.
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: pjt@google.com
Link: http://lkml.kernel.org/n/tip-5slqz0vhsdzewrfk9eza1aon@git.kernel.org
Signed-off-by: Ingo Molnar <mingo@elte.hu>
When we are PI-blocked then we want to get things done ASAP.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/n/tip-vw8et3445km5b8mpihf4trae@git.kernel.org
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Idle task boosting is a nono in general. There is one
exception, when PREEMPT_RT and NOHZ is active:
The idle task calls get_next_timer_interrupt() and holds
the timer wheel base->lock on the CPU and another CPU wants
to access the timer (probably to cancel it). We can safely
ignore the boosting request, as the idle CPU runs this code
with interrupts disabled and will complete the lock
protected section without being interrupted. So there is no
real need to boost.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/n/tip-755rvsosz7sdzot12a3gbha6@git.kernel.org
Signed-off-by: Ingo Molnar <mingo@elte.hu>
For code which protects the waitqueue itself with another lock it
makes no sense to acquire the waitqueue lock for wakeup all. Provide
__wake_up_all_locked().
This is an optimization on the vanilla kernel (to be used by the
PCI code) and an important semantic distinction on -rt.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/n/tip-ux6m4b8jonb9inx8xafh77ds@git.kernel.org
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Create a distinction between scheduler related preempt_enable_no_resched()
calls and the nearly one hundred other places in the kernel that do not
want to reschedule, for one reason or another.
This distinction matters for -rt, where the scheduler and the non-scheduler
preempt models (and checks) are different. For upstream it's purely
documentational.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/n/tip-gs88fvx2mdv5psnzxnv575ke@git.kernel.org
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Add helper to get rid of the ever repeating:
preempt_enable_no_resched();
schedule();
preempt_disable();
patterns.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/n/tip-wxx7btox7coby6ifv5vzhzgp@git.kernel.org
Signed-off-by: Ingo Molnar <mingo@elte.hu>
When a runqueue has rt_runtime_us = 0 then the only way it can
accumulate rt_time is via PI boosting. That causes the runqueue
to be throttled and replenishing does not change anything due to
rt_runtime_us = 0. So avoid that situation by clearing rt_time and
skip the throttling alltogether.
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
[ Changelog ]
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/n/tip-7x70cypsotjb4jvcor3edctk@git.kernel.org
Signed-off-by: Ingo Molnar <mingo@elte.hu>
When a runqueue is throttled we cannot disable the period timer
because that timer is the only way to undo the throttling.
We got stale throttling entries when a rq was throttled and then the
global sysctl was disabled, which stopped the timer.
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
[ Added changelog ]
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/n/tip-nuj34q52p6ro7szapuz84i0v@git.kernel.org
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Different tree maintainers picked up independently generated
trivial compile fixes based on linux-next testing, resulting
in some cases where a file would have got more than one addition
of module.h once everything was all merged together.
Delete any duplicates so includecheck isn't complaining about
anything related to module.h/export.h changes.
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
In the jump label enabled case, calling static_key_enabled()
results in a function call. The function returns the results of
a compare, so it really doesn't need the overhead of a full
function call. Let's make it 'static inline' for both the jump
label enabled and disabled cases.
Signed-off-by: Jason Baron <jbaron@redhat.com>
Cc: a.p.zijlstra@chello.nl
Cc: rostedt@goodmis.org
Cc: mathieu.desnoyers@polymtl.ca
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: http://lkml.kernel.org/r/201202281849.q1SIn1p2023270@int-mx10.intmail.prod.int.phx2.redhat.com
Signed-off-by: Ingo Molnar <mingo@elte.hu>
The major features of this series are:
- making RCU more aggressive about entering dyntick-idle mode in order to
improve energy efficiency
- converting a few more call_rcu()s to kfree_rcu()s
- applying a number of rcutree fixes and cleanups to rcutiny
- removing CONFIG_SMP #ifdefs from treercu
- allowing RCU CPU stall times to be set via sysfs
- adding CPU-stall capability to rcutorture
- adding more RCU-abuse diagnostics
- updating documentation
- fixing yet more issues located by the still-ongoing top-to-bottom
inspection of RCU, this time with a special focus on the
CPU-hotplug code path.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
If kzalloc() for TYPE_DATA failed on a given cpu, previous chunk
of TYPE_INST will be leaked. Fix it.
Thanks to Peter Zijlstra for suggesting this better solution. It
should work as long as the initial value of the region is all
0's and that's the case of static (per-cpu) memory allocation.
Signed-off-by: Namhyung Kim <namhyung.kim@lge.com>
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
Link: http://lkml.kernel.org/r/1330391978-28070-1-git-send-email-namhyung.kim@lge.com
Signed-off-by: Ingo Molnar <mingo@elte.hu>
* 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
genirq: Handle pending irqs in irq_startup()
genirq: Unmask oneshot irqs when thread was not woken
On PowerPC, FUNCTION_TRACER selects FRAME_POINTER, even
though the architecture does not support it.
This causes the following warning:
warning: (LOCKDEP && FAULT_INJECTION_STACKTRACE_FILTER && LATENCYTOP && FUNCTION_TRACER && KMEMCHECK) selects FRAME_POINTER which has unmet direct dependencies (DEBUG_KERNEL && (CRIS || M68K || FRV || UML || AVR32 || SUPERH || BLACKFIN || MN10300) || ARCH_WANT_FRAME_POINTERS)
So remove the warning by adding the extra condition
"if !PPC" to FUNCTION_TRACER for FRAME_POINTER selection
Link: http://lkml.kernel.org/r/1330330101-8618-1-git-send-email-gerlando.falauto@keymile.com
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Signed-off-by: Gerlando Falauto <gerlando.falauto@keymile.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Currently, during CPU hotplug, the cpuset callbacks modify the cpusets
to reflect the state of the system, and this handling is asymmetric.
That is, upon CPU offline, that CPU is removed from all cpusets. However
when it comes back online, it is put back only to the root cpuset.
This gives rise to a significant problem during suspend/resume. During
suspend, we offline all non-boot cpus and during resume we online them back.
Which means, after a resume, all cpusets (except the root cpuset) will be
restricted to just one single CPU (the boot cpu). But the whole point of
suspend/resume is to restore the system to a state which is as close as
possible to how it was before suspend.
So to fix this, don't touch cpusets during suspend/resume. That is, modify
the cpuset-related CPU hotplug callback to just ignore CPU hotplug when it
is initiated as part of the suspend/resume sequence.
Reported-by: Prashanth Nageshappa <prashanth@linux.vnet.ibm.com>
Signed-off-by: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: stable@vger.kernel.org
Link: http://lkml.kernel.org/r/4F460D7B.1020703@linux.vnet.ibm.com
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
This patch is intentionally incomplete to simplify the review.
It ignores ep_unregister_pollwait() which plays with the same wqh.
See the next change.
epoll assumes that the EPOLL_CTL_ADD'ed file controls everything
f_op->poll() needs. In particular it assumes that the wait queue
can't go away until eventpoll_release(). This is not true in case
of signalfd, the task which does EPOLL_CTL_ADD uses its ->sighand
which is not connected to the file.
This patch adds the special event, POLLFREE, currently only for
epoll. It expects that init_poll_funcptr()'ed hook should do the
necessary cleanup. Perhaps it should be defined as EPOLLFREE in
eventpoll.
__cleanup_sighand() is changed to do wake_up_poll(POLLFREE) if
->signalfd_wqh is not empty, we add the new signalfd_cleanup()
helper.
ep_poll_callback(POLLFREE) simply does list_del_init(task_list).
This make this poll entry inconsistent, but we don't care. If you
share epoll fd which contains our sigfd with another process you
should blame yourself. signalfd is "really special". I simply do
not know how we can define the "right" semantics if it used with
epoll.
The main problem is, epoll calls signalfd_poll() once to establish
the connection with the wait queue, after that signalfd_poll(NULL)
returns the different/inconsistent results depending on who does
EPOLL_CTL_MOD/signalfd_read/etc. IOW: apart from sigmask, signalfd
has nothing to do with the file, it works with the current thread.
In short: this patch is the hack which tries to fix the symptoms.
It also assumes that nobody can take tasklist_lock under epoll
locks, this seems to be true.
Note:
- we do not have wake_up_all_poll() but wake_up_poll()
is fine, poll/epoll doesn't use WQ_FLAG_EXCLUSIVE.
- signalfd_cleanup() uses POLLHUP along with POLLFREE,
we need a couple of simple changes in eventpoll.c to
make sure it can't be "lost".
Reported-by: Maxime Bizon <mbizon@freebox.fr>
Cc: <stable@kernel.org>
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This patch makes IRQ_DOMAIN usable on MIPS. It uses an ugly workaround
to preserve current behaviour so that MIPS has time to add irq_domain
registration to the irq controller drivers. The workaround will be
removed in Linux v3.6
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Rob Herring <rob.herring@calxeda.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-mips@linux-mips.org
So here's a boot tested patch on top of Jason's series that does
all the cleanups I talked about and turns jump labels into a
more intuitive to use facility. It should also address the
various misconceptions and confusions that surround jump labels.
Typical usage scenarios:
#include <linux/static_key.h>
struct static_key key = STATIC_KEY_INIT_TRUE;
if (static_key_false(&key))
do unlikely code
else
do likely code
Or:
if (static_key_true(&key))
do likely code
else
do unlikely code
The static key is modified via:
static_key_slow_inc(&key);
...
static_key_slow_dec(&key);
The 'slow' prefix makes it abundantly clear that this is an
expensive operation.
I've updated all in-kernel code to use this everywhere. Note
that I (intentionally) have not pushed through the rename
blindly through to the lowest levels: the actual jump-label
patching arch facility should be named like that, so we want to
decouple jump labels from the static-key facility a bit.
On non-jump-label enabled architectures static keys default to
likely()/unlikely() branches.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Acked-by: Jason Baron <jbaron@redhat.com>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
Cc: a.p.zijlstra@chello.nl
Cc: mathieu.desnoyers@efficios.com
Cc: davem@davemloft.net
Cc: ddaney.cavm@gmail.com
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: http://lkml.kernel.org/r/20120222085809.GA26397@elte.hu
Signed-off-by: Ingo Molnar <mingo@elte.hu>
As the ring-buffer code is being used by other facilities in the
kernel, having tracing_on file disable *all* buffers is not a desired
affect. It should only disable the ftrace buffers that are being used.
Move the code into the trace.c file and use the buffer disabling
for tracing_on() and tracing_off(). This way only the ftrace buffers
will be affected by them and other kernel utilities will not be
confused to why their output suddenly stopped.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Current the initial SCHED_RR timeslice of init_task is HZ, which means
1s, and is not same as the default SCHED_RR timeslice DEF_TIMESLICE.
Change that initial timeslice to the DEF_TIMESLICE.
Signed-off-by: Hiroshi Shimamoto <h-shimamoto@ct.jp.nec.com>
[ s/DEF_TIMESLICE/RR_TIMESLICE/g ]
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/4F3C9995.3010800@ct.jp.nec.com
Signed-off-by: Ingo Molnar <mingo@elte.hu>
select_idle_sibling() is called from select_task_rq_fair(), which
already has the RCU read lock held.
Signed-off-by: Nikunj A. Dadhania <nikunj@linux.vnet.ibm.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/20120217030409.11748.12491.stgit@abhimanyu
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Commit 1ac9bc69 ("sched/tracing: Add a new tracepoint for sleeptime")
added a new sched:sched_stat_sleeptime tracepoint.
It's broken: the first sample we get on a task might be bad because
of a stale sleep_start value that wasn't reset at the last task switch
because the tracepoint was not active.
It also breaks the existing schedstat samples due to the side
effects of:
- se->statistics.sleep_start = 0;
...
- se->statistics.block_start = 0;
Nor do I see means to fix it without adding overhead to the scheduler
fast path, which I'm not willing to for the sake of redundant
instrumentation.
Most importantly, sleep time information can already be constructed
by tracing context switches and wakeups, and taking the timestamp
difference between the schedule-out, the wakeup and the schedule-in.
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Andrew Vagin <avagin@openvz.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Link: http://lkml.kernel.org/n/tip-pc4c9qhl8q6vg3bs4j6k0rbd@git.kernel.org
Signed-off-by: Ingo Molnar <mingo@elte.hu>
