Commit Graph

19 Commits

Author SHA1 Message Date
Joe Perches
f58e1f53de arch/x86/kernel/microcode*: Use pr_fmt() and remove duplicated KERN_ERR prefix
- Use #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
- Remove "microcode: " prefix from each pr_<level>
- Fix duplicated KERN_ERR prefix
- Coalesce pr_<level> format strings
- Add a space after an exclamation point

No other change in output.

Signed-off-by: Joe Perches <joe@perches.com>
Cc: Andy Whitcroft <apw@canonical.com>
Cc: Andreas Herrmann <herrmann.der.user@googlemail.com>
LKML-Reference: <1260340250.27677.191.camel@Joe-Laptop.home>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-12-09 08:25:57 +01:00
Dmitry Adamushko
871b72dd1e x86: microcode: use smp_call_function_single instead of set_cpus_allowed, cleanup of synchronization logic
* Solve issues described in 6f66cbc630
  in a way that doesn't resort to set_cpus_allowed();

* in fact, only collect_cpu_info and apply_microcode callbacks
  must run on a target cpu, others will do just fine on any other.
  smp_call_function_single() (as suggested by Ingo) is used to run
  these callbacks on a target cpu.

* cleanup of synchronization logic of the 'microcode_core' part

  The generic 'microcode_core' part guarantees that only a single cpu
  (be it a full-fledged cpu, one of the cores or HT)
  is being updated at any particular moment of time.

  In general, there is no need for any additional sync. mechanism in
  arch-specific parts (the patch removes existing spinlocks).

  See also the "Synchronization" section in microcode_core.c.

* return -EINVAL instead of -1 (which is translated into -EPERM) in
  microcode_write(), reload_cpu() and mc_sysdev_add(). Other suggestions
  for an error code?

* use 'enum ucode_state' as return value of request_microcode_{fw, user}
  to gain more flexibility by distinguishing between real error cases
  and situations when an appropriate ucode was not found (which is not an
  error per-se).

* some minor cleanups

Thanks a lot to Hugh Dickins for review/suggestions/testing!

   Reference: http://marc.info/?l=linux-kernel&m=124025889012541&w=2

[ Impact: refactor and clean up microcode driver locking code ]

Signed-off-by: Dmitry Adamushko <dmitry.adamushko@gmail.com>
Acked-by: Hugh Dickins <hugh@veritas.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Andreas Herrmann <andreas.herrmann3@amd.com>
Cc: Peter Oruba <peter.oruba@amd.com>
Cc: Arjan van de Ven <arjan@infradead.org>
LKML-Reference: <1242078507.5560.9.camel@earth>
[ did some more cleanups ]
Signed-off-by: Ingo Molnar <mingo@elte.hu>
 arch/x86/include/asm/microcode.h  |   25 ++
 arch/x86/kernel/microcode_amd.c   |   58 ++----
 arch/x86/kernel/microcode_core.c  |  326 +++++++++++++++++++++-----------------
 arch/x86/kernel/microcode_intel.c |   92 +++-------
 4 files changed, 261 insertions(+), 240 deletions(-)

(~20 new comment lines)
2009-05-12 10:36:44 +02:00
Ingo Molnar
4bae196735 x86: microcode: cleanup
Impact: cleanup

Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Dmitry Adamushko <dmitry.adamushko@gmail.com>
Cc: Peter Oruba <peter.oruba@amd.com>
LKML-Reference: <200903111632.37279.rusty@rustcorp.com.au>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-03-18 13:51:17 +01:00
Jaswinder Singh Rajput
dd3feda774 x86: microcode_intel.c fix style problems
Impact: cleanup

Fix:

 WARNING: Use #include <linux/uaccess.h> instead of <asm/uaccess.h>
 ERROR: trailing whitespace
 ERROR: "(foo*)" should be "(foo *)"

 total: 3 errors, 1 warnings

Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-12 11:22:40 +01:00
Ingo Molnar
fa623d1b02 Merge branches 'x86/apic', 'x86/cleanups', 'x86/cpufeature', 'x86/crashdump', 'x86/debug', 'x86/defconfig', 'x86/detect-hyper', 'x86/doc', 'x86/dumpstack', 'x86/early-printk', 'x86/fpu', 'x86/idle', 'x86/io', 'x86/memory-corruption-check', 'x86/microcode', 'x86/mm', 'x86/mtrr', 'x86/nmi-watchdog', 'x86/pat2', 'x86/pci-ioapic-boot-irq-quirks', 'x86/ptrace', 'x86/quirks', 'x86/reboot', 'x86/setup-memory', 'x86/signal', 'x86/sparse-fixes', 'x86/time', 'x86/uv' and 'x86/xen' into x86/core 2008-12-23 16:27:23 +01:00
Dmitry Adamushko
280a9ca5d0 x86: fix resume (S2R) broken by Intel microcode module, on A110L
Impact: fix deadlock

This is in response to the following bug report:

Bug-Entry       : http://bugzilla.kernel.org/show_bug.cgi?id=12100
Subject         : resume (S2R) broken by Intel microcode module, on A110L
Submitter       : Andreas Mohr <andi@lisas.de>
Date            : 2008-11-25 08:48 (19 days old)
Handled-By      : Dmitry Adamushko <dmitry.adamushko@gmail.com>

[ The deadlock scenario has been discovered by Andreas Mohr ]

I think I might have a logical explanation why the system:

  (http://bugzilla.kernel.org/show_bug.cgi?id=12100)

might hang upon resuming, OTOH it should have likely hanged each and every time.

(1) possible deadlock in microcode_resume_cpu() if either 'if' section is
taken;

(2) now, I don't see it in spec. and can't experimentally verify it (newer
ucodes don't seem to be available for my Core2duo)... but logically-wise, I'd
think that when read upon resuming, the 'microcode revision' (MSR 0x8B) should
be back to its original one (we need to reload ucode anyway so it doesn't seem
logical if a cpu doesn't drop the version)... if so, the comparison with
memcmp() for the full 'struct cpu_signature' is wrong... and that's how one of
the aforementioned 'if' sections might have been triggered - leading to a
deadlock.

Obviously, in my tests I simulated loading/resuming with the ucode of the same
version (just to see that the file is loaded/re-loaded upon resuming) so this
issue has never popped up.

I'd appreciate if someone with an appropriate system might give a try to the
2nd patch (titled "fix a comparison && deadlock...").

In any case, the deadlock situation is a must-have fix.

Reported-by: Andreas Mohr <andi@lisas.de>
Signed-off-by: Dmitry Adamushko <dmitry.adamushko@gmail.com>
Tested-by: Andreas Mohr <andi@lisas.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Cc: <stable@kernel.org>

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-12-20 14:29:20 +01:00
Hannes Eder
4db646b1af x86: microcode: fix sparse warnings
Impact: make global variables and a function static

Fix following sparse warnings:

  arch/x86/kernel/microcode_core.c:102:22: warning: symbol
  'microcode_ops' was not declared. Should it be static?
  arch/x86/kernel/microcode_core.c:206:24: warning: symbol
  'microcode_pdev' was not declared. Should it be static?
  arch/x86/kernel/microcode_core.c:322:6: warning: symbol
  'microcode_update_cpu' was not declared. Should it be static?
  arch/x86/kernel/microcode_intel.c:468:22: warning: symbol
  'microcode_intel_ops' was not declared. Should it be static?

Signed-off-by: Hannes Eder <hannes@hanneseder.net>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-11-26 08:49:19 +01:00
Dmitry Adamushko
18dbc91605 x86: moved microcode.c to microcode_intel.c
Combine both generic and arch-specific parts of microcode into a
single module (arch-specific parts are config-dependent).

Also while we are at it, move arch-specific parts from microcode.h
into their respective arch-specific .c files.

Signed-off-by: Dmitry Adamushko <dmitry.adamushko@gmail.com>
Cc: "Peter Oruba" <peter.oruba@amd.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-09-23 12:21:42 +02:00
Ingo Molnar
a1c75cc501 x86, microcode rework, v2, fix
based on patch from Dmitry Adamushko.

- add missing vfree()
- update debug printks

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-09-14 14:53:00 +02:00
Dmitry Adamushko
a0a29b62a9 x86, microcode rework, v2
this is a rework of the microcode splitup in tip/x86/microcode

(1) I think this new interface is cleaner (look at the changes
    in 'struct microcode_ops' in microcode.h);

(2) it's -64 lines of code;

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-09-12 12:20:27 +02:00
Dmitry Adamushko
d45de40934 x86-microcode: generic interface refactoring
This is the 1st patch in the series. Here the aim was to avoid any
significant changes, logically-wise.

So it's mainly about generic interface refactoring: e.g. make
microcode_{intel,amd}.c more about arch-specific details and less
about policies like make-sure-we-run-on-a-target-cpu
(no more set_cpus_allowed_ptr() here) and generic synchronization (no
more microcode_mutex here).

All in all, more line have been deleted than added.

4 files changed, 145 insertions(+), 198 deletions(-)

Signed-off-by: Dmitry Adamushko <dmitry.adamushko@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-08-20 12:18:57 +02:00
Dmitry Adamushko
8343ef2437 x86-microcode: fix unbalanced use of get_cpu()
Don't use get_cpu() at all. Resort to checking a boot-up CPU (#0) in
microcode_{intel,amd}_module_init().

Signed-off-by: Dmitry Adamushko <dmitry.adamushko@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-08-20 12:18:55 +02:00
David Woodhouse
34a1b9fc49 Fix date output in x86 microcode driver.
The microcode stores its date in a uint32_t in some weird order
approximating pdp-endian. Rather than printing it like that, print it
properly in ISO standard form.

Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Cc: Shaohua Li <shaohua.li@intel.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-08-13 18:54:56 +02:00
Peter Oruba
f516526feb x86: Intel microcode patch loader style corrections
Signed-off-by: Peter Oruba <peter.oruba@amd.com>
Cc: Tigran Aivazian <tigran@aivazian.fsnet.co.uk>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-31 23:26:16 +02:00
Ingo Molnar
3825c9e8d0 Merge commit 'v2.6.27-rc1' into x86/microcode
Conflicts:

	arch/x86/kernel/microcode.c

Manual resolutions:

	arch/x86/kernel/microcode_amd.c
	arch/x86/kernel/microcode_intel.c

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-29 11:54:24 +02:00
Peter Oruba
8d86f390d9 x86: major refactoring
Refactored code by introducing a two-module solution.

There is one general module in which vendor specific modules can hook into.
However, that is exclusive, there is only one vendor specific module
allowed at a time. A CPU vendor check makes sure only the correct
module for the underlying system gets called.

Functinally in terms of patch loading itself there are no changes. This
refactoring provides a basis for future implementations of other vendors'
patch loaders.

Signed-off-by: Peter Oruba <peter.oruba@amd.com>
Cc: Tigran Aivazian <tigran@aivazian.fsnet.co.uk>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-28 19:57:57 +02:00
Peter Oruba
d4ee366868 x86: structure declaration renaming
Renamed common structures to vendor specific naming scheme
so other vendors will be able to use the same naming
convention.

Signed-off-by: Peter Oruba <peter.oruba@amd.com>
Cc: Tigran Aivazian <tigran@aivazian.fsnet.co.uk>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-28 19:57:55 +02:00
Peter Oruba
3e135d887c x86: code split to two parts
Split off existing code into two seperate files. One file holds general
code, the other file vendor specific parts.

No functional changes, only refactoring.

Temporarily Introduced a new module name 'ucode' for result,
due to already taken name 'microcode'.

Signed-off-by: Peter Oruba <peter.oruba@amd.com>
Cc: Tigran Aivazian <tigran@aivazian.fsnet.co.uk>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-28 19:57:55 +02:00
Peter Oruba
1abae31096 x86: move microcode.c to microcode_intel.c
Signed-off-by: Peter Oruba <peter.oruba@amd.com>
Cc: Tigran Aivazian <tigran@aivazian.fsnet.co.uk>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-28 19:57:54 +02:00