IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
This reverts commit 8ff60eb052.
The kernel test robot reports a huge performance regression due to the
commit, and the reason seems fairly straightforward: when there is
contention on the page list (which is what causes acquire_slab() to
fail), we do _not_ want to just loop and try again, because that will
transfer the contention to the 'n->list_lock' spinlock we hold, and
just make things even worse.
This is admittedly likely a problem only on big machines - the kernel
test robot report comes from a 96-thread dual socket Intel Xeon Gold
6252 setup, but the regression there really is quite noticeable:
-47.9% regression of stress-ng.rawpkt.ops_per_sec
and the commit that was marked as being fixed (7ced371971: "slub:
Acquire_slab() avoid loop") actually did the loop exit early very
intentionally (the hint being that "avoid loop" part of that commit
message), exactly to avoid this issue.
The correct thing to do may be to pick some kind of reasonable middle
ground: instead of breaking out of the loop on the very first sign of
contention, or trying over and over and over again, the right thing may
be to re-try _once_, and then give up on the second failure (or pick
your favorite value for "once"..).
Reported-by: kernel test robot <oliver.sang@intel.com>
Link: https://lore.kernel.org/lkml/20210301080404.GF12822@xsang-OptiPlex-9020/
Cc: Jann Horn <jannh@google.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Acked-by: Christoph Lameter <cl@linux.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCYEiQUgAKCRCRxhvAZXjc
omY/AQDEn45Gx6YxDOiWXxyreS3JYx8jVNyy85uDDFRwR0qK+QEAgsmdOxOJoFfe
zzNA8dKmXx2t+upuK8htmqtQTrGV/wg=
=9MKn
-----END PGP SIGNATURE-----
Merge tag 'for-linus-2021-03-10' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux
Pull detached mounts fix from Christian Brauner:
"Creating a series of detached mounts, attaching them to the
filesystem, and unmounting them can be used to trigger an integer
overflow in ns->mounts causing the kernel to block any new mounts in
count_mounts() and returning ENOSPC because it falsely assumes that
the maximum number of mounts in the mount namespace has been reached,
i.e. it thinks it can't fit the new mounts into the mount namespace
anymore.
Without this fix heavy use of the new mount API with move_mount() will
cause the host to become unuseable and thus blocks some xfstest
patches I want to resend.
Depending on the number of mounts in your system, this can be
reproduced on any kernel that supportes open_tree() and move_mount().
A reproducer has been sent for inclusion with xfstests. It takes care
to do this in another mount namespace, not in the host's mount
namespace so there shouldn't be any risk in running it but if one did
run it on the host it would require a reboot in order to be able to
mount again. See
https://lore.kernel.org/fstests/20210309121041.753359-1-christian.brauner@ubuntu.com
The root cause of this is that detached mounts aren't handled
correctly when source and target mount are identical and reside on a
shared mount causing a broken mount tree where the detached source
itself is propagated which propagation prevents for regular
bind-mounts and new mounts.
This ultimately leads to a miscalculation of the number of mounts in
the mount namespace.
Detached mounts created via 'open_tree(fd, path, OPEN_TREE_CLONE)' are
essentially like an unattached bind-mount. They can then later on be
attached to the filesystem via move_mount() which calls into
attach_recursive_mount().
Part of attaching it to the filesystem is making sure that mounts get
correctly propagated in case the destination mountpoint is MS_SHARED,
i.e. is a shared mountpoint. This is done by calling into
propagate_mnt() which walks the list of peers calling propagate_one()
on each mount in this list making sure it receives the propagation
event. The propagate_one() function thereby skips both new mounts and
bind mounts to not propagate them "into themselves". Both are
identified by checking whether the mount is already attached to any
mount namespace in mnt->mnt_ns. The is what the IS_MNT_NEW() helper is
responsible for.
However, detached mounts have an anonymous mount namespace attached to
them stashed in mnt->mnt_ns which means that IS_MNT_NEW() doesn't
realize they need to be skipped causing the mount to propagate "into
itself" breaking the mount table and causing a disconnect between the
number of mounts recorded as being beneath or reachable from the
target mountpoint and the number of mounts actually recorded/counted
in ns->mounts ultimately causing an overflow which in turn prevents
any new mounts via the ENOSPC issue.
So teach propagation to handle detached mounts by making it aware of
them. I've been tracking this issue down for the last couple of days
and then verifying that the fix is correct by unmounting everything in
my current mount table leaving only /proc and /sys mounted and running
the reproducer above overnight verifying the number of mounts counted
in ns->mounts. With this fix the counts are correct and the ENOSPC
issue can't be reproduced.
This change will only have an effect on mounts created with the new
mount API since detached mounts cannot be created with the old mount
API so regressions are extremely unlikely.
Here's an illustration:
#### mount():
ubuntu@f1-vm:~$ sudo mount --bind /mnt/ /mnt/
ubuntu@f1-vm:~$ findmnt | grep -i mnt
├─/mnt /dev/sda2[/mnt] ext4 rw,relatime
#### open_tree(OPEN_TREE_CLONE) + move_mount() with bug:
ubuntu@f1-vm:~$ sudo ./mount-new /mnt/ /mnt/
ubuntu@f1-vm:~$ findmnt | grep -i mnt
├─/mnt /dev/sda2[/mnt] ext4 rw,relatime
│ └─/mnt /dev/sda2[/mnt] ext4 rw,relatime
#### open_tree(OPEN_TREE_CLONE) + move_mount() with the fix:
ubuntu@f1-vm:~$ sudo ./mount-new /mnt /mnt
ubuntu@f1-vm:~$ findmnt | grep -i mnt
└─/mnt /dev/sda2[/mnt] ext4 rw,relatime"
* tag 'for-linus-2021-03-10' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux:
mount: fix mounting of detached mounts onto targets that reside on shared mounts
-----BEGIN PGP SIGNATURE-----
iQGzBAABCgAdFiEE6fsu8pdIjtWE/DpLiiy9cAdyT1EFAmBIMv0ACgkQiiy9cAdy
T1HNFwwAsXZ2JUK6TO2SGbNiW5uBDcIbRjfSH7rgmVQ/q1Csnszrpyz8iLEToUGP
GH3g04n7GeM5zDB267QHifX44aA2Yy3GbE/goJUhdacAsmkMMDcHmHoJL6OoDvK4
PUlfLaWHOK1E3MWxpf0idftfNKlcequjxLOpcLTQQg83TC6peYvkMncbjCQVgldw
4npV40b3qXVZ0TagglR4POQ4gCJt6GXrLwEPIoUbzAPuTZtJfa4LEPa5cJ0gYbSI
SJ6Ri8KcZu//O/FAEUTJOg3ggkmVy13H7dSf29rRsjVcLYI3lQ8zcMHlCBKw00YF
Jc3m95Xyn0xsjELKAg5kHd/1yz4vFvitYn9NyVhYUAWtCbMs/2MEYSQJnuLxF1Vm
RpLRLDQFpewkoEGFNMTfZyNY3A6hq1gQJYcqmmgVru+hAcozvs3+YHhNKWwEMWAP
weTSpoa/ERUfAn5XcNP5gELcEQALLOHsACJtJ+00T+A+DD7XgWjTX1ynMDa58MfG
UySTW3iY
=zEnL
-----END PGP SIGNATURE-----
Merge tag '5.12-rc2-smb3' of git://git.samba.org/sfrench/cifs-2.6
Pull cifs fixes from Steve French:
"Six cifs/smb3 fixes, three of them for stable, including some
important mulitchannel crediting fixes, and a fix for statfs error
handling"
* tag '5.12-rc2-smb3' of git://git.samba.org/sfrench/cifs-2.6:
cifs: do not send close in compound create+close requests
cifs: return proper error code in statfs(2)
cifs: change noisy error message to FYI
cifs: print MIDs in decimal notation
cifs: ask for more credit on async read/write code paths
cifs: fix credit accounting for extra channel
Export the module FDT device table to ensure the FDT compatible strings
are listed in the module alias. This help the pvpanic driver can be
loaded on boot automatically not only the ACPI device, but also the FDT
device.
Fixes: 46f934c9a1 ("misc/pvpanic: add support to get pvpanic device info FDT")
Signed-off-by: Shile Zhang <shile.zhang@linux.alibaba.com>
Link: https://lore.kernel.org/r/20210218123116.207751-1-shile.zhang@linux.alibaba.com
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Verify that user applications are not using the kernel RPC message
handle to restrict them from directly attaching to guest OS on the
remote subsystem. This is a port of CVE-2019-2308 fix.
Fixes: c68cfb718c ("misc: fastrpc: Add support for context Invoke method")
Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Cc: Jonathan Marek <jonathan@marek.ca>
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20210212192658.3476137-1-dmitry.baryshkov@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Initialize x86_pmu.guest_get_msrs to return 0/NULL to handle the "nop"
case. Patching in perf_guest_get_msrs_nop() during setup does not work
if there is no PMU, as setup bails before updating the static calls,
leaving x86_pmu.guest_get_msrs NULL and thus a complete nop. Ultimately,
this causes VMX abort on VM-Exit due to KVM putting random garbage from
the stack into the MSR load list.
Add a comment in KVM to note that nr_msrs is valid if and only if the
return value is non-NULL.
Fixes: abd562df94 ("x86/perf: Use static_call for x86_pmu.guest_get_msrs")
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Reported-by: syzbot+cce9ef2dd25246f815ee@syzkaller.appspotmail.com
Suggested-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20210309171019.1125243-1-seanjc@google.com
When create_singlethread_workqueue returns NULL to card->event_wq, no
error return code of rsxx_pci_probe() is assigned.
To fix this bug, st is assigned with -ENOMEM in this case.
Fixes: 8722ff8cdb ("block: IBM RamSan 70/80 device driver")
Reported-by: TOTE Robot <oslab@tsinghua.edu.cn>
Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com>
Link: https://lore.kernel.org/r/20210310033017.4023-1-baijiaju1990@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Similarly to a single zone reset operation (REQ_OP_ZONE_RESET), execute
REQ_OP_ZONE_RESET_ALL operations with REQ_SYNC set.
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We use ->ctx_new_list to notify sqo about new ctx pending, then sqo
should stop and splice it to its sqd->ctx_list, paired with
->sq_thread_comp.
The last one is broken because nobody reinitialises it, and trying to
fix it would only add more complexity and bugs. And the first isn't
really needed as is done under park(), that protects from races well.
Add ctx into sqd->ctx_list directly (under park()), it's much simpler
and allows to kill both, ctx_new_list and sq_thread_comp.
note: apparently there is no real problem at the moment, because
sq_thread_comp is used only by io_sq_thread_finish() followed by
parking, where list_del(&ctx->sqd_list) removes it well regardless
whether it's in the new or the active list.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We have to set ctx->sq_thread_idle before adding a ring to an SQ task,
otherwise sqd races for seeing zero and accounting it as such.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The io-wq threads were already marked as no-freeze, but the manager was
not. On resume, we perpetually have signal_pending() being true, and
hence the manager will loop and spin 100% of the time.
Just mark the tasks created by create_io_thread() as PF_NOFREEZE by
default, and remove any knowledge of it in io-wq and io_uring.
Reported-by: Kevin Locke <kevin@kevinlocke.name>
Tested-by: Kevin Locke <kevin@kevinlocke.name>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We have a tiny race where io_put_sq_data() calls io_sq_thead_stop()
and finds the thread gone, but the thread has indeed not fully
exited or called complete() yet. Close it up by always having
io_sq_thread_stop() wait on completion of the exit event.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Fix the following coccicheck warning:
./fs/io_uring.c:8984:5-8: Unneeded variable: "ret". Return "0" on line
8998
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Link: https://lore.kernel.org/r/1615271441-33649-1-git-send-email-yang.lee@linux.alibaba.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
If we hit an error path in the function, make sure that the io_kiocb is
fully initialized at that point so that freeing the request always sees
a valid state.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
do_work such as io_wq_submit_work that cancel the work may leave a ref of
req as 1 if we have links. Fix it by call io_run_cancel.
Fixes: 4fb6ac3262 ("io-wq: improve manager/worker handling over exec")
Signed-off-by: yangerkun <yangerkun@huawei.com>
Link: https://lore.kernel.org/r/20210309030410.3294078-1-yangerkun@huawei.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Calling io_queue_next() after spin_unlock in io_req_complete_post()
races with the other side extracting and reusing this request. Hand
coded parts of io_req_find_next() considering that io_disarm_next()
and io_req_task_queue() have (and safe) to be called with
completion_lock held.
It already does io_commit_cqring() and io_cqring_ev_posted(), so just
reuse it for post io_disarm_next().
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/5672a62f3150ee7c55849f40c0037655c4f2840f.1615250156.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
A preparation patch placing all preparations before extracting a next
request into a separate helper io_disarm_next().
Also, don't spuriously do ev_posted in a rare case where REQ_F_FAIL_LINK
is set but there are no requests linked (i.e. after cancelling a linked
timeout or setting IOSQE_IO_LINK on a last request of a submission
batch).
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/44ecff68d6b47e1c4e6b891bdde1ddc08cfc3590.1615250156.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Don't set IO_SQ_THREAD_SHOULD_STOP when io_sq_offload_create() has
failed on io_uring_alloc_task_context() but leave everything to
io_sq_thread_finish(), because currently io_sq_thread_finish()
hangs on trying to park it. That's great it stalls there, because
otherwise the following io_sq_thread_stop() would be skipped on
IO_SQ_THREAD_SHOULD_STOP check and the sqo would race for sqd with
freeing ctx.
A simple error injection gives something like this.
[ 245.463955] INFO: task sqpoll-test-hang:523 blocked for more than 122 seconds.
[ 245.463983] Call Trace:
[ 245.463990] __schedule+0x36b/0x950
[ 245.464005] schedule+0x68/0xe0
[ 245.464013] schedule_timeout+0x209/0x2a0
[ 245.464032] wait_for_completion+0x8b/0xf0
[ 245.464043] io_sq_thread_finish+0x44/0x1a0
[ 245.464049] io_uring_setup+0x9ea/0xc80
[ 245.464058] __x64_sys_io_uring_setup+0x16/0x20
[ 245.464064] do_syscall_64+0x38/0x50
[ 245.464073] entry_SYSCALL_64_after_hwframe+0x44/0xae
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
You can't call idr_remove() from within a idr_for_each() callback,
but you can call xa_erase() from an xa_for_each() loop, so switch the
entire personality_idr from the IDR to the XArray. This manifests as a
use-after-free as idr_for_each() attempts to walk the rest of the node
after removing the last entry from it.
Fixes: 071698e13a ("io_uring: allow registering credentials")
Cc: stable@vger.kernel.org # 5.6+
Reported-by: yangerkun <yangerkun@huawei.com>
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
[Pavel: rebased (creds load was moved into io_init_req())]
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/7ccff36e1375f2b0ebf73d957f037b43becc0dde.1615212806.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
There are enough of problems with IORING_SETUP_R_DISABLED, including the
burden of checking and kicking off the SQO task all over the codebase --
for exit/cancel/etc.
Rework it, always start the thread but don't do submit unless the flag
is gone, that's much easier.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
io-wq now is per-task, so cancellations now should match against
request's ctx.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We keep running into weird dependency issues between the sqd lock and
the parking state. Disentangle the SQPOLL thread from the last bits of
the kthread parking inheritance, and just replace the parking state,
and two associated locks, with a single rw mutex. The SQPOLL thread
keeps the mutex for read all the time, except if someone has marked us
needing to park. Then we drop/re-acquire and try again.
This greatly simplifies the parking state machine (by just getting rid
of it), and makes it a lot more obvious how it works - if you need to
modify the ctx list, then you simply park the thread which will grab
the lock for writing.
Fold in fix from Hillf Danton on not setting STOP on a fatal signal.
Fixes: e54945ae94 ("io_uring: SQPOLL stop error handling fixes")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The function device_add_software_node() was meant to
register the node supplied to it, but only if that node
wasn't already registered. Right now the function attempts
to always register the node. That will cause a failure with
nodes that are already registered.
Fixing that by incrementing the reference count of the nodes
that have already been registered, and only registering the
new nodes. Also, clarifying the behaviour in the function
documentation.
Fixes: e68d0119e3 ("software node: Introduce device_add_software_node()")
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Tested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Software node can not be registered before its parent.
Fixes: 80488a6b1d ("software node: Add support for static node descriptors")
Cc: 5.10+ <stable@vger.kernel.org> # 5.10+
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Tested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
When creating a new event channel with 2-level events the affinity
needs to be reset initially in order to avoid using an old affinity
from earlier usage of the event channel port. So when tearing an event
channel down reset all affinity bits.
The same applies to the affinity when onlining a vcpu: all old
affinity settings for this vcpu must be reset. As percpu events get
initialized before the percpu event channel hook is called,
resetting of the affinities happens after offlining a vcpu (this is
working, as initial percpu memory is zeroed out).
Cc: stable@vger.kernel.org
Reported-by: Julien Grall <julien@xen.org>
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Julien Grall <jgrall@amazon.com>
Link: https://lore.kernel.org/r/20210306161833.4552-2-jgross@suse.com
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
In case of error, the function dev_get_regmap() returns NULL
pointer not ERR_PTR(). The IS_ERR() test in the return value
check should be replaced with NULL test.
Fixes: 9351ab8b0c ("regulator: rt4831: Adds support for Richtek RT4831 DSV regulator")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Link: https://lore.kernel.org/r/20210305034930.3236099-1-weiyongjun1@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The driver uses the DVS registers PCA9450_REG_BUCKxOUT_DVS0 to set the
voltage for the buck regulators 1, 2 and 3. This has no effect as the
PRESET_EN bit is set by default and therefore the preset values are used
instead, which are set to 850 mV.
To fix this we clear the PRESET_EN bit at time of initialization.
Fixes: 0935ff5f1f ("regulator: pca9450: add pca9450 pmic driver")
Cc: <stable@vger.kernel.org>
Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Link: https://lore.kernel.org/r/20210222115229.166620-1-frieder.schrempf@kontron.de
Signed-off-by: Mark Brown <broonie@kernel.org>
This fixes the return value of pca9450_i2c_probe() to use the correct
error code when getting the sd-vsel GPIO fails.
Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Link: https://lore.kernel.org/r/20210222150809.208942-1-frieder.schrempf@kontron.de
Signed-off-by: Mark Brown <broonie@kernel.org>
The per_pin->work might be still floating at the suspend, and this may
hit the access to the hardware at an unexpected timing. Cancel the
work properly at the suspend callback for avoiding the buggy access.
Note that the bug doesn't trigger easily in the recent kernels since
the work is queued only when the repoll count is set, and usually it's
only at the resume callback, but it's still possible to hit in
theory.
BugLink: https://bugzilla.suse.com/show_bug.cgi?id=1182377
Reported-and-tested-by: Abhishek Sahu <abhsahu@nvidia.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210310112809.9215-4-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
When HD-audio bus receives unsolicited events during its system
suspend/resume (S3 and S4) phase, the controller driver may still try
to process events although the codec chips are already (or yet)
powered down. This might screw up the codec communication, resulting
in CORB/RIRB errors. Such events should be rather skipped, as the
codec chip status such as the jack status will be fully refreshed at
the system resume time.
Since we're tracking the system suspend/resume state in codec
power.power_state field, let's add the check in the common unsol event
handler entry point to filter out such events.
BugLink: https://bugzilla.suse.com/show_bug.cgi?id=1182377
Tested-by: Abhishek Sahu <abhsahu@nvidia.com>
Cc: <stable@vger.kernel.org> # 183ab39eb0: ALSA: hda: Initialize power_state
Link: https://lore.kernel.org/r/20210310112809.9215-3-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The HD-audio controller driver processes the unsolicited events via
its work asynchronously, and this might be pending when the system
goes to suspend. When a lengthy event handling like ELD byte reads is
running, this might trigger unexpected accesses among suspend/resume
procedure, typically seen with Nvidia driver that still requires the
handling via unsolicited event verbs for ELD updates.
This patch adds the flush of unsol_work to assure that pending events
are processed before going into suspend.
Buglink: https://bugzilla.suse.com/show_bug.cgi?id=1182377
Reported-and-tested-by: Abhishek Sahu <abhsahu@nvidia.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210310112809.9215-2-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Commit 0fdf1bb759 ("arm64: perf: Avoid PMXEV* indirection") changed
armv8pmu_read_evcntr() to return a u32 instead of u64. The result is
silent truncation of the event counter when using 64-bit counters. Given
the offending commit appears to have passed thru several folks, it seems
likely this was a bad rebase after v8.5 PMU 64-bit counters landed.
Cc: Alexandru Elisei <alexandru.elisei@arm.com>
Cc: Julien Thierry <julien.thierry.kdev@gmail.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: <stable@vger.kernel.org>
Fixes: 0fdf1bb759 ("arm64: perf: Avoid PMXEV* indirection")
Signed-off-by: Rob Herring <robh@kernel.org>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Alexandru Elisei <alexandru.elisei@arm.com>
Link: https://lore.kernel.org/r/20210310004412.1450128-1-robh@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
As per ARM ARM DDI 0487G.a, when FEAT_LPA2 is implemented, ID_AA64MMFR0_EL1
might contain a range of values to describe supported translation granules
(4K and 16K pages sizes in particular) instead of just enabled or disabled
values. This changes __enable_mmu() function to handle complete acceptable
range of values (depending on whether the field is signed or unsigned) now
represented with ID_AA64MMFR0_TGRAN_SUPPORTED_[MIN..MAX] pair. While here,
also fix similar situations in EFI stub and KVM as well.
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Marc Zyngier <maz@kernel.org>
Cc: James Morse <james.morse@arm.com>
Cc: Suzuki K Poulose <suzuki.poulose@arm.com>
Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: kvmarm@lists.cs.columbia.edu
Cc: linux-efi@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Acked-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com>
Link: https://lore.kernel.org/r/1615355590-21102-1-git-send-email-anshuman.khandual@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
We track if sve-ptrace encountered a failure in a variable but don't
actually use that value when we exit the program, do so.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20210309190304.39169-1-broonie@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
In a system supporting MTE, the linear map must allow reading/writing
allocation tags by setting the memory type as Normal Tagged. Currently,
this is only handled for memory present at boot. Hotplugged memory uses
Normal non-Tagged memory.
Introduce pgprot_mhp() for hotplugged memory and use it in
add_memory_resource(). The arm64 code maps pgprot_mhp() to
pgprot_tagged().
Note that ZONE_DEVICE memory should not be mapped as Tagged and
therefore setting the memory type in arch_add_memory() is not feasible.
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Fixes: 0178dc7613 ("arm64: mte: Use Normal Tagged attributes for the linear map")
Reported-by: Patrick Daly <pdaly@codeaurora.org>
Tested-by: Patrick Daly <pdaly@codeaurora.org>
Link: https://lore.kernel.org/r/1614745263-27827-1-git-send-email-pdaly@codeaurora.org
Cc: <stable@vger.kernel.org> # 5.10.x
Cc: Will Deacon <will@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Vincenzo Frascino <vincenzo.frascino@arm.com>
Cc: David Hildenbrand <david@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Link: https://lore.kernel.org/r/20210309122601.5543-1-catalin.marinas@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
seqcount_init() must be a macro in order to preserve the static
variable that is used for the lockdep key. Don't then wrap it in an
inline function, which destroys that.
Luckily there aren't many users of this function, but fix it before it
becomes a problem.
Fixes: 80793c3471 ("seqlock: Introduce seqcount_latch_t")
Reported-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/YEeFEbNUVkZaXDp4@hirez.programming.kicks-ass.net
Jakub reported that:
static struct net_device *rtl8139_init_board(struct pci_dev *pdev)
{
...
u64_stats_init(&tp->rx_stats.syncp);
u64_stats_init(&tp->tx_stats.syncp);
...
}
results in lockdep getting confused between the RX and TX stats lock.
This is because u64_stats_init() is an inline calling seqcount_init(),
which is a macro using a static variable to generate a lockdep class.
By wrapping that in an inline, we negate the effect of the macro and
fold the static key variable, hence the confusion.
Fix by also making u64_stats_init() a macro for the case where it
matters, leaving the other case an inline for argument validation
etc.
Reported-by: Jakub Kicinski <kuba@kernel.org>
Debugged-by: "Ahmed S. Darwish" <a.darwish@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: "Erhard F." <erhard_f@mailbox.org>
Link: https://lkml.kernel.org/r/YEXicy6+9MksdLZh@hirez.programming.kicks-ass.net
This fixes the following sparse warning:
"sparse warnings: (new ones prefixed by >>)"
>> drivers/virt/acrn/irqfd.c:163:13: sparse: sparse: restricted __poll_t
degrades to integer
Fixes: dcf9625f2a ("virt: acrn: Use vfs_poll() instead of f_op->poll()")
Reported-by: kernel test robot <lkp@intel.com>
Acked-by: Shuo Liu <shuo.a.liu@intel.com>
Signed-off-by: Yejune Deng <yejune.deng@gmail.com>
Link: https://lore.kernel.org/r/20210310074901.7486-1-yejune.deng@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
of_get_child_by_name() increments the reference counter of the OF node it
managed to find. So after the code is done using the device node, the
refcount must be decremented. Add missing of_node_put() invocation then
to the dwc3_qcom_of_register_core() method, since DWC3 OF node is being
used only there.
Fixes: a4333c3a6b ("usb: dwc3: Add Qualcomm DWC3 glue driver")
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Link: https://lore.kernel.org/r/20210212205521.14280-1-Sergey.Semin@baikalelectronics.ru
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Apparently an application that opens a device and calls select()
on it, will hang if the decice is disconnected. It's a little
surprising that we had this bug for 15 years, but apparently
nobody ever uses select() with a printer: only write() and read(),
and those work fine. Well, you can also select() with a timeout.
The fix is modeled after devio.c. A few other drivers check the
condition first, then do not add the wait queue in case the
device is disconnected. We doubt that's completely race-free.
So, this patch adds the process first, then locks properly
and checks for the disconnect.
Reviewed-by: Zqiang <qiang.zhang@windriver.com>
Signed-off-by: Pete Zaitcev <zaitcev@redhat.com>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210303221053.1cf3313e@suzdal.zaitcev.lan
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In case of error, the function devm_platform_ioremap_resource()
returns ERR_PTR() and never returns NULL. The NULL test in the
return value check should be replaced with IS_ERR().
Fixes: 188db4435a ("usb: gadget: s3c: use platform resources")
Cc: stable <stable@vger.kernel.org>
Reported-by: Hulk Robot <hulkci@huawei.com>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Link: https://lore.kernel.org/r/20210305034927.3232386-1-weiyongjun1@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
According to the datasheet, this controller has a restriction
which "set an endpoint number so that combinations of the DIR bit and
the EPNUM bits do not overlap.". However, since the udc core driver is
possible to assign a bulk pipe as an interrupt endpoint, an endpoint
number may not match the pipe number. After that, when user rebinds
another gadget driver, this driver broke the restriction because
the driver didn't clear any configuration in usb_ep_disable().
Example:
# modprobe g_ncm
Then, EP3 = pipe 3, EP4 = pipe 4, EP5 = pipe 6
# rmmod g_ncm
# modprobe g_hid
Then, EP3 = pipe 6, EP4 = pipe 7.
So, pipe 3 and pipe 6 are set as EP3.
So, clear PIPECFG register in usbhs_pipe_free().
Fixes: dfb87b8bfe ("usb: renesas_usbhs: gadget: fix re-enabling pipe without re-connecting")
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Link: https://lore.kernel.org/r/1615168538-26101-1-git-send-email-yoshihiro.shimoda.uh@renesas.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The dwc3-qcom currently enables wakeup interrupts unconditionally
when suspending, however this should not be done when wakeup is
disabled (e.g. through the sysfs attribute power/wakeup). Only
enable wakeup interrupts when device_may_wakeup() returns true.
Fixes: a4333c3a6b ("usb: dwc3: Add Qualcomm DWC3 glue driver")
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Matthias Kaehlcke <mka@chromium.org>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210302103659.v2.1.I44954d9e1169f2cf5c44e6454d357c75ddfa99a2@changeid
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There is missing playback stop/cleanup in case of
gadget's ->disable callback that happens on
events like USB host resetting or gadget disconnection
Fixes: 0591bc2360 ("usb: gadget: add f_uac1 variant based on a new u_audio api")
Cc: <stable@vger.kernel.org> # 4.13+
Signed-off-by: Ruslan Bilovol <ruslan.bilovol@gmail.com>
Link: https://lore.kernel.org/r/1614599375-8803-3-git-send-email-ruslan.bilovol@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
As per UAC2 Audio Data Formats spec (2.3.1.1 USB Packets),
if the sampling rate is a constant, the allowable variation
of number of audio slots per virtual frame is +/- 1 audio slot.
It means that endpoint should be able to accept/send +1 audio
slot.
Previous endpoint max_packet_size calculation code
was adding sometimes +1 audio slot due to DIV_ROUND_UP
behaviour which was rounding up to closest integer.
However this doesn't work if the numbers are divisible.
It had no any impact with Linux hosts which ignore
this issue, but in case of more strict Windows it
caused rejected enumeration
Thus always add +1 audio slot to endpoint's max packet size
Fixes: 913e4a90b6 ("usb: gadget: f_uac2: finalize wMaxPacketSize according to bandwidth")
Cc: Peter Chen <peter.chen@freescale.com>
Cc: <stable@vger.kernel.org> #v4.3+
Signed-off-by: Ruslan Bilovol <ruslan.bilovol@gmail.com>
Link: https://lore.kernel.org/r/1614599375-8803-2-git-send-email-ruslan.bilovol@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
