IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
Only book3s/64 has scv. No need to check the 0x7ff0 trap on 32 or 64e.
For that, add a helper trap_is_unsupported_scv() similar to
trap_is_scv().
And ignore the scv parameter in syscall_exit_prepare (Save 14 cycles
346 => 332 cycles)
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/fb87b205ae8eb8c623f33bb316801acf95a831e6.1612898425.git.christophe.leroy@csgroup.eu
global_dbcr0 has two parts, 4 bytes to save/restore the
value of SPRN_DBCR0, and 4 bytes that are incremented/decremented
everytime something is saving/loading the above value.
This counter is only incremented/decremented, its value is never
used and never read.
Remove the counter and devide the size of global_dbcr0 by 2.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/7e381dc58b3f583556cfab37ba5d813bfd5cce1e.1612796617.git.christophe.leroy@csgroup.eu
In preparation for porting syscall entry/exit to C, inconditionally
save non volatile general purpose registers.
Commit 965dd3ad3076 ("powerpc/64/syscall: Remove non-volatile GPR save
optimisation") provides detailed explanation.
This increases the number of cycles by 24 cycles on 8xx with
null_syscall benchmark (280 => 304 cycles)
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/21c08162b83655195fe9ead78ff2cfd28508d023.1612796617.git.christophe.leroy@csgroup.eu
To allow building interrupt.c on PPC32, ifdef out specific PPC64
code or use helpers which are available on both PP32 and PPC64
Modify Makefile to always build interrupt.o
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/ba073ad67bd971a88ce331b65d6655523b54c794.1612796617.git.christophe.leroy@csgroup.eu
In preparation of porting PPC32 to C syscall entry/exit,
rewrite the following helpers as static inline functions and
add support for PPC32 in them:
__hard_irq_enable()
__hard_irq_disable()
__hard_EE_RI_disable()
__hard_RI_enable()
Then use them in PPC32 version of arch_local_irq_disable()
and arch_local_irq_enable() to avoid code duplication.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/0e290372a0e7dc2ae657b4a01aec85f8de7fdf77.1612796617.git.christophe.leroy@csgroup.eu
Now that we are using rfi instead of mtmsr to reactivate MMU, it is
possible to reorder instructions and avoid the need to use CTR for
stashing SRR0.
null_syscall on 8xx is reduced by 3 cycles (283 => 280 cycles).
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/8fa13a59f73647e058c95fc7e1c7a98f316bd20a.1612796617.git.christophe.leroy@csgroup.eu
On 40x and 8xx, kernel text is pinned.
On book3s/32, kernel text is mapped by BATs.
Enable instruction translation at the same time as data translation, it
makes things simpler.
MSR_RI can also be set at the same time because srr0/srr1 are already
saved and r1 is set properly.
On booke, translation is always on, so at the end all PPC32
have translation on early.
This reduces null_syscall benchmark by 13 cycles on 8xx
(296 ==> 283 cycles).
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/3fe8891c814103a3549efc1d4e7ffc828bba5993.1612796617.git.christophe.leroy@csgroup.eu
If the code can use a stack in vm area, it can also use a
stack in linear space.
Simplify code by removing old non VMAP stack code on PPC32 in syscall.
That means the data translation is now re-enabled early in
syscall entry in all cases, not only when using VMAP stacks.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/412c6c1786922d991bbb89c2ad2e82cffe8ab112.1612796617.git.christophe.leroy@csgroup.eu
Userspace Execution protection and fast syscall entry were implemented
independently from each other and were both merged in kernel 5.2,
leading to syscall entry missing userspace execution protection.
On syscall entry, execution of user space memory must be
locked in the same way as on exception entry.
Fixes: b86fb88855ea ("powerpc/32: implement fast entry for syscalls on non BOOKE")
Cc: stable@vger.kernel.org
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/c65e105b63aaf74f91a14f845bc77192350b84a6.1612796617.git.christophe.leroy@csgroup.eu
Swap upper/lower 32 bits for 64-bit compat syscalls, conditioned on
endianness. This is modeled after the same functionality in
arch/mips/kernel/linux32.c.
This fixes compat_sys on ppc64le, when called by 32-bit little-endian
processes.
Tested with `file /bin/bash` (pread64) and `truncate -s 5G test`
(ftruncate64).
Signed-off-by: Will Springer <skirmisher@protonmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/2765111.e9J7NaK4W3@sheen
This mirrors the behavior in handle_rt_signal32, to obey kernel endianness
rather than assume a 32-bit process is big-endian. Without this change,
any 32-bit little-endian process will SIGILL immediately upon handling a
signal.
Signed-off-by: Joseph J Allen <eerykitty@gmail.com>
Signed-off-by: Will Springer <skirmisher@protonmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/2058876.irdbgypaU6@sheen
On systems with large amount of memory, loading kdump kernel through
kexec_file_load syscall may fail with the below error:
"Failed to update fdt with linux,drconf-usable-memory property"
This happens because the size estimation for kdump kernel's FDT does
not account for the additional space needed to setup usable memory
properties. Fix it by accounting for the space needed to include
linux,usable-memory & linux,drconf-usable-memory properties while
estimating kdump kernel's FDT size.
Fixes: 6ecd0163d360 ("powerpc/kexec_file: Add appropriate regions for memory reserve map")
Cc: stable@vger.kernel.org # v5.9+
Signed-off-by: Hari Bathini <hbathini@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/161243826811.119001.14083048209224609814.stgit@hbathini
We added dcache flush on memory add/remove in commit
fb5924fddf9e ("powerpc/mm: Flush cache on memory hot(un)plug") to
handle crashes on GPU hotplug. Instead of adding dcache flush in
generic memory add/remove routine which is used even for regular
memory, we should handle these devices specific flush in the device
driver code.
memtrace did handle this in the driver and that was removed by commit
7fd6641de28f ("powerpc/powernv/memtrace: Let the arch hotunplug code
flush cache"). This patch reverts that commit.
The dcache flush in memory add was removed by commit
ea458effa88e ("powerpc: Don't flush caches when adding memory") which
I don't think is correct. The reason why we require dcache flush in
memtrace is to make sure we don't have a dirty cache when we remap a
pfn to cache inhibited. We should do that when the memtrace module
removes the memory and make the pfn available for HTM traces to map it
as cache inhibited.
The other device mentioned in commit fb5924fddf9e ("powerpc/mm: Flush
cache on memory hot(un)plug") is nvlink device with coherent memory.
The support for that was removed in commit
7eb3cf761927 ("powerpc/powernv: remove unused NPU DMA code") and
commit 25b2995a35b6 ("mm: remove MEMORY_DEVICE_PUBLIC support")
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210203045812.234439-3-aneesh.kumar@linux.ibm.com
THP config results in compound pages. Make sure the kernel enables
the PageCompound() check with CONFIG_HUGETLB_PAGE disabled and
CONFIG_TRANSPARENT_HUGEPAGE enabled.
This makes sure we correctly flush the icache with THP pages.
flush_dcache_icache_page only matter for platforms that don't support
COHERENT_ICACHE.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210203045812.234439-1-aneesh.kumar@linux.ibm.com
Fix the following coccicheck warnings:
./arch/powerpc/kvm/book3s_xive.c:1856:2-17: WARNING: Assignment of 0/1
to bool variable.
./arch/powerpc/kvm/book3s_xive.c:1854:2-17: WARNING: Assignment of 0/1
to bool variable.
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/1612680192-43116-1-git-send-email-jiapeng.chong@linux.alibaba.com
THREAD_ALIGN_SHIFT = THREAD_SHIFT + 1 = PAGE_SHIFT + 1
Maximum PAGE_SHIFT is 18 for 256k pages so
THREAD_ALIGN_SHIFT is 19 at the maximum.
No need to clobber cr1, it can be preserved when moving r1
into CR when we check stack overflow.
This reduces the number of instructions in Machine Check Exception
prolog and fixes a build failure reported by the kernel test robot
on v5.10 stable when building with RTAS + VMAP_STACK + KVM. That
build failure is due to too many instructions in the prolog hence
not fitting between 0x200 and 0x300. Allthough the problem doesn't
show up in mainline, it is still worth the change.
Fixes: 98bf2d3f4970 ("powerpc/32s: Fix RTAS machine check with VMAP stack")
Cc: stable@vger.kernel.org
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/5ae4d545e3ac58e133d2599e0deb88843cb494fc.1612768623.git.christophe.leroy@csgroup.eu
SLB faults should not be taken while the PACA save areas are live, all
memory accesses should be fetches from the kernel text, and access to
PACA and the current stack, before C code is called or any other
accesses are made.
All of these have pinned SLBs so will not take a SLB fault. Therefore
EXSLB is not be required.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210208063406.331655-1-npiggin@gmail.com
Have the real mode system call entry handler branch to the kernel
0xc000... address and then use mtmsrd to enable the MMU, rather than use
SRRs and rfid.
Commit 8729c26e675c ("powerpc/64s/exception: Move real to virt switch
into the common handler") implemented this style of real mode entry for
other interrupt handlers, so this brings system calls into line with
them, which is the main motivcation for the change.
This tends to be slightly faster due to avoiding the mtsprs, and it also
does not clobber the SRR registers, which becomes important in a
subsequent change. The real mode entry points don't tend to be too
important for performance these days, but it is possible for a
hypervisor to run guests in AIL=0 mode for certian reasons.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210208063326.331502-1-npiggin@gmail.com
Since de78a9c42a79 ("powerpc: Add a framework for Kernel Userspace
Access Protection"), user access helpers call user_{read|write}_access_{begin|end}
when user space access is allowed.
Commit 890274c2dc4c ("powerpc/64s: Implement KUAP for Radix MMU") made
the mentioned helpers program a AMR special register to allow such
access for a short period of time, most of the time AMR is expected to
block user memory access by the kernel.
Since the code accesses the user space memory, unsafe_get_user() calls
might_fault() which calls arch_local_irq_restore() if either
CONFIG_PROVE_LOCKING or CONFIG_DEBUG_ATOMIC_SLEEP is enabled.
arch_local_irq_restore() then attempts to replay pending soft
interrupts as KUAP regions have hardware interrupts enabled.
If a pending interrupt happens to do user access (performance
interrupts do that), it enables access for a short period of time so
after returning from the replay, the user access state remains blocked
and if a user page fault happens - "Bug: Read fault blocked by AMR!"
appears and SIGSEGV is sent.
An example trace:
Bug: Read fault blocked by AMR!
WARNING: CPU: 0 PID: 1603 at /home/aik/p/kernel/arch/powerpc/include/asm/book3s/64/kup-radix.h:145
CPU: 0 PID: 1603 Comm: amr Not tainted 5.10.0-rc6_v5.10-rc6_a+fstn1 #24
NIP: c00000000009ece8 LR: c00000000009ece4 CTR: 0000000000000000
REGS: c00000000dc63560 TRAP: 0700 Not tainted (5.10.0-rc6_v5.10-rc6_a+fstn1)
MSR: 8000000000021033 <SF,ME,IR,DR,RI,LE> CR: 28002888 XER: 20040000
CFAR: c0000000001fa928 IRQMASK: 1
GPR00: c00000000009ece4 c00000000dc637f0 c000000002397600 000000000000001f
GPR04: c0000000020eb318 0000000000000000 c00000000dc63494 0000000000000027
GPR08: c00000007fe4de68 c00000000dfe9180 0000000000000000 0000000000000001
GPR12: 0000000000002000 c0000000030a0000 0000000000000000 0000000000000000
GPR16: 0000000000000000 0000000000000000 0000000000000000 bfffffffffffffff
GPR20: 0000000000000000 c0000000134a4020 c0000000019c2218 0000000000000fe0
GPR24: 0000000000000000 0000000000000000 c00000000d106200 0000000040000000
GPR28: 0000000000000000 0000000000000300 c00000000dc63910 c000000001946730
NIP __do_page_fault+0xb38/0xde0
LR __do_page_fault+0xb34/0xde0
Call Trace:
__do_page_fault+0xb34/0xde0 (unreliable)
handle_page_fault+0x10/0x2c
--- interrupt: 300 at strncpy_from_user+0x290/0x440
LR = strncpy_from_user+0x284/0x440
strncpy_from_user+0x2f0/0x440 (unreliable)
getname_flags+0x88/0x2c0
do_sys_openat2+0x2d4/0x5f0
do_sys_open+0xcc/0x140
system_call_exception+0x160/0x240
system_call_common+0xf0/0x27c
To fix it save/restore the AMR when replaying interrupts, and also
add a check if AMR was not blocked prior to replaying interrupts.
Originally found by syzkaller.
Fixes: 890274c2dc4c ("powerpc/64s: Implement KUAP for Radix MMU")
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
[mpe: Use normal commit citation format and add full oops log to
change log, move kuap_check_amr() into the restore routine to
avoid warnings about unreconciled IRQ state]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210202091541.36499-1-aik@ozlabs.ru
The amount of code executed with enabled user space access (unlocked
KUAP) should be minimal. However with CONFIG_PROVE_LOCKING or
CONFIG_DEBUG_ATOMIC_SLEEP enabled, might_fault() calls into various
parts of the kernel, and may even end up replaying interrupts which in
turn may access user space and forget to restore the KUAP state.
The problem places are:
1. strncpy_from_user (and similar) which unlock KUAP and call
unsafe_get_user -> __get_user_allowed -> __get_user_nocheck()
with do_allow=false to skip KUAP as the caller took care of it.
2. __unsafe_put_user_goto() which is called with unlocked KUAP.
eg:
WARNING: CPU: 30 PID: 1 at arch/powerpc/include/asm/book3s/64/kup.h:324 arch_local_irq_restore+0x160/0x190
NIP arch_local_irq_restore+0x160/0x190
LR lock_is_held_type+0x140/0x200
Call Trace:
0xc00000007f392ff8 (unreliable)
___might_sleep+0x180/0x320
__might_fault+0x50/0xe0
filldir64+0x2d0/0x5d0
call_filldir+0xc8/0x180
ext4_readdir+0x948/0xb40
iterate_dir+0x1ec/0x240
sys_getdents64+0x80/0x290
system_call_exception+0x160/0x280
system_call_common+0xf0/0x27c
Change __get_user_nocheck() to look at `do_allow` to decide whether to
skip might_fault(). Since strncpy_from_user/etc call might_fault()
anyway before unlocking KUAP, there should be no visible change.
Drop might_fault() in __unsafe_put_user_goto() as it is only called
from unsafe_put_user(), which already has KUAP unlocked.
Since keeping might_fault() is still desirable for debugging, add
calls to it in user_[read|write]_access_begin(). That also allows us
to drop the is_kernel_addr() test, because there should be no code
using user_[read|write]_access_begin() in order to access a kernel
address.
Fixes: de78a9c42a79 ("powerpc: Add a framework for Kernel Userspace Access Protection")
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
[mpe: Combine with related patch from myself, merge change logs]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210204121612.32721-1-aik@ozlabs.ru
Currently unsafe_put_user() expands to __put_user_goto(), which
expands to __put_user_nocheck_goto().
There are no other uses of __put_user_nocheck_goto(), and although
there are some other uses of __put_user_goto() those could just use
unsafe_put_user().
Every layer of indirection introduces the possibility that some code
is calling that layer, and makes keeping track of the required
semantics at each point more complicated.
So drop __put_user_goto(), and rename __put_user_nocheck_goto() to
__unsafe_put_user_goto(). The "nocheck" is implied by "unsafe".
Replace the few uses of __put_user_goto() with unsafe_put_user().
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210208135717.2618798-1-mpe@ellerman.id.au
It's only used in setup.c, so make it static.
Fixes: 053d58c87029 ("powerpc/amigaone: Move PHB discovery")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210210130804.3190952-3-mpe@ellerman.id.au
As reported by lkp:
arch/powerpc/mm/book3s64/radix_tlb.c:646:6: warning: no previous
prototype for function 'exit_lazy_flush_tlb'
Fix it by moving the prototype into the existing header.
Fixes: 032b7f08932c ("powerpc/64s/radix: serialize_against_pte_lookup IPIs trim mm_cpumask")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210210130804.3190952-2-mpe@ellerman.id.au
As reported by lkp:
arch/powerpc/platforms/83xx/km83xx.c:183:19: error: 'mpc83xx_setup_pci' undeclared here (not in a function)
183 | .discover_phbs = mpc83xx_setup_pci,
| ^~~~~~~~~~~~~~~~~
| mpc83xx_setup_arch
There is a stub defined for the CONFIG_PCI=n case, but now that
mpc83xx_setup_pci() is being assigned to discover_phbs the correct
empty value is NULL.
Fixes: 83f84041ff1c ("powerpc/83xx: Move PHB discovery")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210210130804.3190952-1-mpe@ellerman.id.au
The allyesconfig ppc64 kernel fails to link with relocations unable to
fit after commit 3a96570ffceb ("powerpc: convert interrupt handlers to
use wrappers"), which is due to the interrupt handler functions being
put into the .noinstr.text section, which the linker script places on
the opposite side of the main .text section from the interrupt entry
asm code which calls the handlers.
This results in a lot of linker stubs that overwhelm the 252-byte sized
space we allow for them, or in the case of BE a .opd relocation link
error for some reason.
It's not required to put interrupt handlers in the .noinstr section,
previously they used NOKPROBE_SYMBOL, so take them out and replace
with a NOKPROBE_SYMBOL in the wrapper macro. Remove the explicit
NOKPROBE_SYMBOL macros in the interrupt handler functions. This makes
a number of interrupt handlers nokprobe that were not prior to the
interrupt wrappers commit, but since that commit they were made
nokprobe due to being in .noinstr.text, so this fix does not change
that.
The fixes tag is different to the commit that first exposes the problem
because it is where the wrapper macros were introduced.
Fixes: 8d41fc618ab8 ("powerpc: interrupt handler wrapper functions")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
[mpe: Slightly fix up comment wording]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210211063636.236420-1-npiggin@gmail.com
As part of commit fbbefb320214 ("powerpc/pci: Move PHB discovery for
PCI_DN using platforms"), I switched some allocations from
memblock_alloc() to kmalloc(), otherwise memblock would warn that it
was being called after slab init.
However I missed that the code relied on the allocations being zeroed,
without which we could end up crashing:
pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to ff
BUG: Unable to handle kernel data access on read at 0x6b6b6b6b6b6b6af7
Faulting instruction address: 0xc0000000000dbc90
Oops: Kernel access of bad area, sig: 11 [#1]
LE PAGE_SIZE=64K MMU=Hash SMP NR_CPUS=2048 NUMA PowerNV
...
NIP pnv_ioda_get_pe_state+0xe0/0x1d0
LR pnv_ioda_get_pe_state+0xb4/0x1d0
Call Trace:
pnv_ioda_get_pe_state+0xb4/0x1d0 (unreliable)
pnv_pci_config_check_eeh.isra.9+0x78/0x270
pnv_pci_read_config+0xf8/0x160
pci_bus_read_config_dword+0xa4/0x120
pci_bus_generic_read_dev_vendor_id+0x54/0x270
pci_scan_single_device+0xb8/0x140
pci_scan_slot+0x80/0x1b0
pci_scan_child_bus_extend+0x94/0x490
pcibios_scan_phb+0x1f8/0x3c0
pcibios_init+0x8c/0x12c
do_one_initcall+0x94/0x510
kernel_init_freeable+0x35c/0x3fc
kernel_init+0x2c/0x168
ret_from_kernel_thread+0x5c/0x70
Switch them to kzalloc().
Fixes: fbbefb320214 ("powerpc/pci: Move PHB discovery for PCI_DN using platforms")
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210211112749.3410771-1-mpe@ellerman.id.au
Commit 68ad28a4cdd4 ("KVM: PPC: Book3S HV: Fix radix guest SLB side
channel") incorrectly removed the radix host instruction patch to skip
re-loading the host SLB entries when exiting from a hash
guest. Restore it.
Fixes: 68ad28a4cdd4 ("KVM: PPC: Book3S HV: Fix radix guest SLB side channel")
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
Commit 68ad28a4cdd4 ("KVM: PPC: Book3S HV: Fix radix guest SLB side
channel") changed the older guest entry path, with the side effect
that vcpu->arch.slb_max no longer gets cleared for a radix guest.
This means that a HPT guest which loads some SLB entries, switches to
radix mode, runs the guest using the old guest entry path (e.g.,
because the indep_threads_mode module parameter has been set to
false), and then switches back to HPT mode would now see the old SLB
entries being present, whereas previously it would have seen no SLB
entries.
To avoid changing guest-visible behaviour, this adds a store
instruction to clear vcpu->arch.slb_max for a radix guest using the
old guest entry path.
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
To avoid include recursion hell move the do_softirq_own_stack() related
content into a generic asm header and include it from all places in arch/
which need the prototype.
This allows architectures to provide an inline implementation of
do_softirq_own_stack() without introducing a lot of #ifdeffery all over the
place.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20210210002513.289960691@linutronix.de
To prepare for inlining do_softirq_own_stack() replace
__ARCH_HAS_DO_SOFTIRQ with a Kconfig switch and select it in the affected
architectures.
This allows in the next step to move the function prototype and the inline
stub into a seperate asm-generic header file which is required to avoid
include recursion.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20210210002513.181713427@linutronix.de
Eliminate the following coccicheck warning:
./arch/powerpc/crypto/sha256-spe-glue.c:132:2-3: Unneeded
semicolon
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
These machines don't support running both MMU types at the same time,
so remove the KVM_CAP_PPC_MMU_HASH_V3 capability when the host is
using Radix MMU.
[paulus@ozlabs.org - added defensive check on
kvmppc_hv_ops->hash_v3_possible]
Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
The Facility Status and Control Register is a privileged SPR that
defines the availability of some features in problem state. Since it
can be written by the guest, we must restore it to the previous host
value after guest exit.
This restoration is currently done by taking the value from
current->thread.fscr, which in the P9 path is not enough anymore
because the guest could context switch the QEMU thread, causing the
guest-current value to be saved into the thread struct.
The above situation manifested when running a QEMU linked against a
libc with System Call Vectored support, which causes scv
instructions to be run by QEMU early during the guest boot (during
SLOF), at which point the FSCR is 0 due to guest entry. After a few
scv calls (1 to a couple hundred), the context switching happens and
the QEMU thread runs with the guest value, resulting in a Facility
Unavailable interrupt.
This patch saves and restores the host value of FSCR in the inner
guest entry loop in a way independent of current->thread.fscr. The old
way of doing it is still kept in place because it works for the old
entry path.
Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
Eliminate the following coccicheck warning:
./arch/powerpc/kvm/booke.c:701:2-3: Unneeded semicolon
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
IH=6 may preserve hypervisor real-mode ERAT entries and is the
recommended SLBIA hint for switching partitions.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
The slbmte instruction is legal in radix mode, including radix guest
mode. This means radix guests can load the SLB with arbitrary data.
KVM host does not clear the SLB when exiting a guest if it was a
radix guest, which would allow a rogue radix guest to use the SLB as
a side channel to communicate with other guests.
Fix this by ensuring the SLB is cleared when coming out of a radix
guest. Only the first 4 entries are a concern, because radix guests
always run with LPCR[UPRT]=1, which limits the reach of slbmte. slbia
is not used (except in a non-performance-critical path) because it
can clear cached translations.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Fabiano Rosas <farosas@linux.ibm.com>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
This reverts much of commit c01015091a770 ("KVM: PPC: Book3S HV: Run HPT
guests on POWER9 radix hosts"), which was required to run HPT guests on
RPT hosts on early POWER9 CPUs without support for "mixed mode", which
meant the host could not run with MMU on while guests were running.
This code has some corner case bugs, e.g., when the guest hits a machine
check or HMI the primary locks up waiting for secondaries to switch LPCR
to host, which they never do. This could all be fixed in software, but
most CPUs in production have mixed mode support, and those that don't
are believed to be all in installations that don't use this capability.
So simplify things and remove support.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Tested-by: Fabiano Rosas <farosas@linux.ibm.com>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
Introduce KVM_CAP_PPC_DAWR1 which can be used by QEMU to query whether
KVM supports 2nd DAWR or not. The capability is by default disabled
even when the underlying CPU supports 2nd DAWR. QEMU needs to check
and enable it manually to use the feature.
Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
