a049a30fc2
794 Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
Linus Torvalds
|
59a2ceeef6 |
Merge branch 'akpm' (patches from Andrew)
Merge more updates from Andrew Morton: "87 patches. Subsystems affected by this patch series: mm (pagecache and hugetlb), procfs, misc, MAINTAINERS, lib, checkpatch, binfmt, kallsyms, ramfs, init, codafs, nilfs2, hfs, crash_dump, signals, seq_file, fork, sysvfs, kcov, gdb, resource, selftests, and ipc" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (87 commits) ipc/ipc_sysctl.c: remove fallback for !CONFIG_PROC_SYSCTL ipc: check checkpoint_restore_ns_capable() to modify C/R proc files selftests/kselftest/runner/run_one(): allow running non-executable files virtio-mem: disallow mapping virtio-mem memory via /dev/mem kernel/resource: disallow access to exclusive system RAM regions kernel/resource: clean up and optimize iomem_is_exclusive() scripts/gdb: handle split debug for vmlinux kcov: replace local_irq_save() with a local_lock_t kcov: avoid enable+disable interrupts if !in_task() kcov: allocate per-CPU memory on the relevant node Documentation/kcov: define `ip' in the example Documentation/kcov: include types.h in the example sysv: use BUILD_BUG_ON instead of runtime check kernel/fork.c: unshare(): use swap() to make code cleaner seq_file: fix passing wrong private data seq_file: move seq_escape() to a header signal: remove duplicate include in signal.h crash_dump: remove duplicate include in crash_dump.h crash_dump: fix boolreturn.cocci warning hfs/hfsplus: use WARN_ON for sanity check ... |
||
Johannes Weiner
|
51b8c1fe25 |
vfs: keep inodes with page cache off the inode shrinker LRU
Historically (pre-2.5), the inode shrinker used to reclaim only empty inodes and skip over those that still contained page cache. This caused problems on highmem hosts: struct inode could put fill lowmem zones before the cache was getting reclaimed in the highmem zones. To address this, the inode shrinker started to strip page cache to facilitate reclaiming lowmem. However, this comes with its own set of problems: the shrinkers may drop actively used page cache just because the inodes are not currently open or dirty - think working with a large git tree. It further doesn't respect cgroup memory protection settings and can cause priority inversions between containers. Nowadays, the page cache also holds non-resident info for evicted cache pages in order to detect refaults. We've come to rely heavily on this data inside reclaim for protecting the cache workingset and driving swap behavior. We also use it to quantify and report workload health through psi. The latter in turn is used for fleet health monitoring, as well as driving automated memory sizing of workloads and containers, proactive reclaim and memory offloading schemes. The consequences of dropping page cache prematurely is that we're seeing subtle and not-so-subtle failures in all of the above-mentioned scenarios, with the workload generally entering unexpected thrashing states while losing the ability to reliably detect it. To fix this on non-highmem systems at least, going back to rotating inodes on the LRU isn't feasible. We've tried (commit |
||
|
Linus Torvalds
|
512b7931ad |
Merge branch 'akpm' (patches from Andrew)
Merge misc updates from Andrew Morton: "257 patches. Subsystems affected by this patch series: scripts, ocfs2, vfs, and mm (slab-generic, slab, slub, kconfig, dax, kasan, debug, pagecache, gup, swap, memcg, pagemap, mprotect, mremap, iomap, tracing, vmalloc, pagealloc, memory-failure, hugetlb, userfaultfd, vmscan, tools, memblock, oom-kill, hugetlbfs, migration, thp, readahead, nommu, ksm, vmstat, madvise, memory-hotplug, rmap, zsmalloc, highmem, zram, cleanups, kfence, and damon)" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (257 commits) mm/damon: remove return value from before_terminate callback mm/damon: fix a few spelling mistakes in comments and a pr_debug message mm/damon: simplify stop mechanism Docs/admin-guide/mm/pagemap: wordsmith page flags descriptions Docs/admin-guide/mm/damon/start: simplify the content Docs/admin-guide/mm/damon/start: fix a wrong link Docs/admin-guide/mm/damon/start: fix wrong example commands mm/damon/dbgfs: add adaptive_targets list check before enable monitor_on mm/damon: remove unnecessary variable initialization Documentation/admin-guide/mm/damon: add a document for DAMON_RECLAIM mm/damon: introduce DAMON-based Reclamation (DAMON_RECLAIM) selftests/damon: support watermarks mm/damon/dbgfs: support watermarks mm/damon/schemes: activate schemes based on a watermarks mechanism tools/selftests/damon: update for regions prioritization of schemes mm/damon/dbgfs: support prioritization weights mm/damon/vaddr,paddr: support pageout prioritization mm/damon/schemes: prioritize regions within the quotas mm/damon/selftests: support schemes quotas mm/damon/dbgfs: support quotas of schemes ... |
||
Mel Gorman
|
8cd7c588de |
mm/vmscan: throttle reclaim until some writeback completes if congested
Patch series "Remove dependency on congestion_wait in mm/", v5.
This series that removes all calls to congestion_wait in mm/ and deletes
wait_iff_congested. It's not a clever implementation but
congestion_wait has been broken for a long time [1].
Even if congestion throttling worked, it was never a great idea. While
excessive dirty/writeback pages at the tail of the LRU is one
possibility that reclaim may be slow, there is also the problem of too
many pages being isolated and reclaim failing for other reasons
(elevated references, too many pages isolated, excessive LRU contention
etc).
This series replaces the "congestion" throttling with 3 different types.
- If there are too many dirty/writeback pages, sleep until a timeout or
enough pages get cleaned
- If too many pages are isolated, sleep until enough isolated pages are
either reclaimed or put back on the LRU
- If no progress is being made, direct reclaim tasks sleep until
another task makes progress with acceptable efficiency.
This was initially tested with a mix of workloads that used to trigger
corner cases that no longer work. A new test case was created called
"stutterp" (pagereclaim-stutterp-noreaders in mmtests) using a freshly
created XFS filesystem. Note that it may be necessary to increase the
timeout of ssh if executing remotely as ssh itself can get throttled and
the connection may timeout.
stutterp varies the number of "worker" processes from 4 up to NR_CPUS*4
to check the impact as the number of direct reclaimers increase. It has
four types of worker.
- One "anon latency" worker creates small mappings with mmap() and
times how long it takes to fault the mapping reading it 4K at a time
- X file writers which is fio randomly writing X files where the total
size of the files add up to the allowed dirty_ratio. fio is allowed
to run for a warmup period to allow some file-backed pages to
accumulate. The duration of the warmup is based on the best-case
linear write speed of the storage.
- Y file readers which is fio randomly reading small files
- Z anon memory hogs which continually map (100-dirty_ratio)% of memory
- Total estimated WSS = (100+dirty_ration) percentage of memory
X+Y+Z+1 == NR_WORKERS varying from 4 up to NR_CPUS*4
The intent is to maximise the total WSS with a mix of file and anon
memory where some anonymous memory must be swapped and there is a high
likelihood of dirty/writeback pages reaching the end of the LRU.
The test can be configured to have no background readers to stress
dirty/writeback pages. The results below are based on having zero
readers.
The short summary of the results is that the series works and stalls
until some event occurs but the timeouts may need adjustment.
The test results are not broken down by patch as the series should be
treated as one block that replaces a broken throttling mechanism with a
working one.
Finally, three machines were tested but I'm reporting the worst set of
results. The other two machines had much better latencies for example.
First the results of the "anon latency" latency
stutterp
5.15.0-rc1 5.15.0-rc1
vanilla mm-reclaimcongest-v5r4
Amean mmap-4 31.4003 ( 0.00%) 2661.0198 (-8374.52%)
Amean mmap-7 38.1641 ( 0.00%) 149.2891 (-291.18%)
Amean mmap-12 60.0981 ( 0.00%) 187.8105 (-212.51%)
Amean mmap-21 161.2699 ( 0.00%) 213.9107 ( -32.64%)
Amean mmap-30 174.5589 ( 0.00%) 377.7548 (-116.41%)
Amean mmap-48 8106.8160 ( 0.00%) 1070.5616 ( 86.79%)
Stddev mmap-4 41.3455 ( 0.00%) 27573.9676 (-66591.66%)
Stddev mmap-7 53.5556 ( 0.00%) 4608.5860 (-8505.23%)
Stddev mmap-12 171.3897 ( 0.00%) 5559.4542 (-3143.75%)
Stddev mmap-21 1506.6752 ( 0.00%) 5746.2507 (-281.39%)
Stddev mmap-30 557.5806 ( 0.00%) 7678.1624 (-1277.05%)
Stddev mmap-48 61681.5718 ( 0.00%) 14507.2830 ( 76.48%)
Max-90 mmap-4 31.4243 ( 0.00%) 83.1457 (-164.59%)
Max-90 mmap-7 41.0410 ( 0.00%) 41.0720 ( -0.08%)
Max-90 mmap-12 66.5255 ( 0.00%) 53.9073 ( 18.97%)
Max-90 mmap-21 146.7479 ( 0.00%) 105.9540 ( 27.80%)
Max-90 mmap-30 193.9513 ( 0.00%) 64.3067 ( 66.84%)
Max-90 mmap-48 277.9137 ( 0.00%) 591.0594 (-112.68%)
Max mmap-4 1913.8009 ( 0.00%) 299623.9695 (-15555.96%)
Max mmap-7 2423.9665 ( 0.00%) 204453.1708 (-8334.65%)
Max mmap-12 6845.6573 ( 0.00%) 221090.3366 (-3129.64%)
Max mmap-21 56278.6508 ( 0.00%) 213877.3496 (-280.03%)
Max mmap-30 19716.2990 ( 0.00%) 216287.6229 (-997.00%)
Max mmap-48 477923.9400 ( 0.00%) 245414.8238 ( 48.65%)
For most thread counts, the time to mmap() is unfortunately increased.
In earlier versions of the series, this was lower but a large number of
throttling events were reaching their timeout increasing the amount of
inefficient scanning of the LRU. There is no prioritisation of reclaim
tasks making progress based on each tasks rate of page allocation versus
progress of reclaim. The variance is also impacted for high worker
counts but in all cases, the differences in latency are not
statistically significant due to very large maximum outliers. Max-90
shows that 90% of the stalls are comparable but the Max results show the
massive outliers which are increased to to stalling.
It is expected that this will be very machine dependant. Due to the
test design, reclaim is difficult so allocations stall and there are
variances depending on whether THPs can be allocated or not. The amount
of memory will affect exactly how bad the corner cases are and how often
they trigger. The warmup period calculation is not ideal as it's based
on linear writes where as fio is randomly writing multiple files from
multiple tasks so the start state of the test is variable. For example,
these are the latencies on a single-socket machine that had more memory
Amean mmap-4 42.2287 ( 0.00%) 49.6838 * -17.65%*
Amean mmap-7 216.4326 ( 0.00%) 47.4451 * 78.08%*
Amean mmap-12 2412.0588 ( 0.00%) 51.7497 ( 97.85%)
Amean mmap-21 5546.2548 ( 0.00%) 51.8862 ( 99.06%)
Amean mmap-30 1085.3121 ( 0.00%) 72.1004 ( 93.36%)
The overall system CPU usage and elapsed time is as follows
5.15.0-rc3 5.15.0-rc3
vanilla mm-reclaimcongest-v5r4
Duration User 6989.03 983.42
Duration System 7308.12 799.68
Duration Elapsed 2277.67 2092.98
The patches reduce system CPU usage by 89% as the vanilla kernel is rarely
stalling.
The high-level /proc/vmstats show
5.15.0-rc1 5.15.0-rc1
vanilla mm-reclaimcongest-v5r2
Ops Direct pages scanned 1056608451.00 503594991.00
Ops Kswapd pages scanned 109795048.00 147289810.00
Ops Kswapd pages reclaimed 63269243.00 31036005.00
Ops Direct pages reclaimed 10803973.00 6328887.00
Ops Kswapd efficiency % 57.62 21.07
Ops Kswapd velocity 48204.98 57572.86
Ops Direct efficiency % 1.02 1.26
Ops Direct velocity 463898.83 196845.97
Kswapd scanned less pages but the detailed pattern is different. The
vanilla kernel scans slowly over time where as the patches exhibits
burst patterns of scan activity. Direct reclaim scanning is reduced by
52% due to stalling.
The pattern for stealing pages is also slightly different. Both kernels
exhibit spikes but the vanilla kernel when reclaiming shows pages being
reclaimed over a period of time where as the patches tend to reclaim in
spikes. The difference is that vanilla is not throttling and instead
scanning constantly finding some pages over time where as the patched
kernel throttles and reclaims in spikes.
Ops Percentage direct scans 90.59 77.37
For direct reclaim, vanilla scanned 90.59% of pages where as with the
patches, 77.37% were direct reclaim due to throttling
Ops Page writes by reclaim 2613590.00 1687131.00
Page writes from reclaim context are reduced.
Ops Page writes anon 2932752.00 1917048.00
And there is less swapping.
Ops Page reclaim immediate 996248528.00 107664764.00
The number of pages encountered at the tail of the LRU tagged for
immediate reclaim but still dirty/writeback is reduced by 89%.
Ops Slabs scanned 164284.00 153608.00
Slab scan activity is similar.
ftrace was used to gather stall activity
Vanilla
-------
1 writeback_wait_iff_congested: usec_timeout=100000 usec_delayed=16000
2 writeback_wait_iff_congested: usec_timeout=100000 usec_delayed=12000
8 writeback_wait_iff_congested: usec_timeout=100000 usec_delayed=8000
29 writeback_wait_iff_congested: usec_timeout=100000 usec_delayed=4000
82394 writeback_wait_iff_congested: usec_timeout=100000 usec_delayed=0
The fast majority of wait_iff_congested calls do not stall at all. What
is likely happening is that cond_resched() reschedules the task for a
short period when the BDI is not registering congestion (which it never
will in this test setup).
1 writeback_congestion_wait: usec_timeout=100000 usec_delayed=120000
2 writeback_congestion_wait: usec_timeout=100000 usec_delayed=132000
4 writeback_congestion_wait: usec_timeout=100000 usec_delayed=112000
380 writeback_congestion_wait: usec_timeout=100000 usec_delayed=108000
778 writeback_congestion_wait: usec_timeout=100000 usec_delayed=104000
congestion_wait if called always exceeds the timeout as there is no
trigger to wake it up.
Bottom line: Vanilla will throttle but it's not effective.
Patch series
------------
Kswapd throttle activity was always due to scanning pages tagged for
immediate reclaim at the tail of the LRU
1 usec_timeout=100000 usect_delayed=72000 reason=VMSCAN_THROTTLE_WRITEBACK
4 usec_timeout=100000 usect_delayed=20000 reason=VMSCAN_THROTTLE_WRITEBACK
5 usec_timeout=100000 usect_delayed=12000 reason=VMSCAN_THROTTLE_WRITEBACK
6 usec_timeout=100000 usect_delayed=16000 reason=VMSCAN_THROTTLE_WRITEBACK
11 usec_timeout=100000 usect_delayed=100000 reason=VMSCAN_THROTTLE_WRITEBACK
11 usec_timeout=100000 usect_delayed=8000 reason=VMSCAN_THROTTLE_WRITEBACK
94 usec_timeout=100000 usect_delayed=0 reason=VMSCAN_THROTTLE_WRITEBACK
112 usec_timeout=100000 usect_delayed=4000 reason=VMSCAN_THROTTLE_WRITEBACK
The majority of events did not stall or stalled for a short period.
Roughly 16% of stalls reached the timeout before expiry. For direct
reclaim, the number of times stalled for each reason were
6624 reason=VMSCAN_THROTTLE_ISOLATED
93246 reason=VMSCAN_THROTTLE_NOPROGRESS
96934 reason=VMSCAN_THROTTLE_WRITEBACK
The most common reason to stall was due to excessive pages tagged for
immediate reclaim at the tail of the LRU followed by a failure to make
forward. A relatively small number were due to too many pages isolated
from the LRU by parallel threads
For VMSCAN_THROTTLE_ISOLATED, the breakdown of delays was
9 usec_timeout=20000 usect_delayed=4000 reason=VMSCAN_THROTTLE_ISOLATED
12 usec_timeout=20000 usect_delayed=16000 reason=VMSCAN_THROTTLE_ISOLATED
83 usec_timeout=20000 usect_delayed=20000 reason=VMSCAN_THROTTLE_ISOLATED
6520 usec_timeout=20000 usect_delayed=0 reason=VMSCAN_THROTTLE_ISOLATED
Most did not stall at all. A small number reached the timeout.
For VMSCAN_THROTTLE_NOPROGRESS, the breakdown of stalls were all over
the map
1 usec_timeout=500000 usect_delayed=324000 reason=VMSCAN_THROTTLE_NOPROGRESS
1 usec_timeout=500000 usect_delayed=332000 reason=VMSCAN_THROTTLE_NOPROGRESS
1 usec_timeout=500000 usect_delayed=348000 reason=VMSCAN_THROTTLE_NOPROGRESS
1 usec_timeout=500000 usect_delayed=360000 reason=VMSCAN_THROTTLE_NOPROGRESS
2 usec_timeout=500000 usect_delayed=228000 reason=VMSCAN_THROTTLE_NOPROGRESS
2 usec_timeout=500000 usect_delayed=260000 reason=VMSCAN_THROTTLE_NOPROGRESS
2 usec_timeout=500000 usect_delayed=340000 reason=VMSCAN_THROTTLE_NOPROGRESS
2 usec_timeout=500000 usect_delayed=364000 reason=VMSCAN_THROTTLE_NOPROGRESS
2 usec_timeout=500000 usect_delayed=372000 reason=VMSCAN_THROTTLE_NOPROGRESS
2 usec_timeout=500000 usect_delayed=428000 reason=VMSCAN_THROTTLE_NOPROGRESS
2 usec_timeout=500000 usect_delayed=460000 reason=VMSCAN_THROTTLE_NOPROGRESS
2 usec_timeout=500000 usect_delayed=464000 reason=VMSCAN_THROTTLE_NOPROGRESS
3 usec_timeout=500000 usect_delayed=244000 reason=VMSCAN_THROTTLE_NOPROGRESS
3 usec_timeout=500000 usect_delayed=252000 reason=VMSCAN_THROTTLE_NOPROGRESS
3 usec_timeout=500000 usect_delayed=272000 reason=VMSCAN_THROTTLE_NOPROGRESS
4 usec_timeout=500000 usect_delayed=188000 reason=VMSCAN_THROTTLE_NOPROGRESS
4 usec_timeout=500000 usect_delayed=268000 reason=VMSCAN_THROTTLE_NOPROGRESS
4 usec_timeout=500000 usect_delayed=328000 reason=VMSCAN_THROTTLE_NOPROGRESS
4 usec_timeout=500000 usect_delayed=380000 reason=VMSCAN_THROTTLE_NOPROGRESS
4 usec_timeout=500000 usect_delayed=392000 reason=VMSCAN_THROTTLE_NOPROGRESS
4 usec_timeout=500000 usect_delayed=432000 reason=VMSCAN_THROTTLE_NOPROGRESS
5 usec_timeout=500000 usect_delayed=204000 reason=VMSCAN_THROTTLE_NOPROGRESS
5 usec_timeout=500000 usect_delayed=220000 reason=VMSCAN_THROTTLE_NOPROGRESS
5 usec_timeout=500000 usect_delayed=412000 reason=VMSCAN_THROTTLE_NOPROGRESS
5 usec_timeout=500000 usect_delayed=436000 reason=VMSCAN_THROTTLE_NOPROGRESS
6 usec_timeout=500000 usect_delayed=488000 reason=VMSCAN_THROTTLE_NOPROGRESS
7 usec_timeout=500000 usect_delayed=212000 reason=VMSCAN_THROTTLE_NOPROGRESS
7 usec_timeout=500000 usect_delayed=300000 reason=VMSCAN_THROTTLE_NOPROGRESS
7 usec_timeout=500000 usect_delayed=316000 reason=VMSCAN_THROTTLE_NOPROGRESS
7 usec_timeout=500000 usect_delayed=472000 reason=VMSCAN_THROTTLE_NOPROGRESS
8 usec_timeout=500000 usect_delayed=248000 reason=VMSCAN_THROTTLE_NOPROGRESS
8 usec_timeout=500000 usect_delayed=356000 reason=VMSCAN_THROTTLE_NOPROGRESS
8 usec_timeout=500000 usect_delayed=456000 reason=VMSCAN_THROTTLE_NOPROGRESS
9 usec_timeout=500000 usect_delayed=124000 reason=VMSCAN_THROTTLE_NOPROGRESS
9 usec_timeout=500000 usect_delayed=376000 reason=VMSCAN_THROTTLE_NOPROGRESS
9 usec_timeout=500000 usect_delayed=484000 reason=VMSCAN_THROTTLE_NOPROGRESS
10 usec_timeout=500000 usect_delayed=172000 reason=VMSCAN_THROTTLE_NOPROGRESS
10 usec_timeout=500000 usect_delayed=420000 reason=VMSCAN_THROTTLE_NOPROGRESS
10 usec_timeout=500000 usect_delayed=452000 reason=VMSCAN_THROTTLE_NOPROGRESS
11 usec_timeout=500000 usect_delayed=256000 reason=VMSCAN_THROTTLE_NOPROGRESS
12 usec_timeout=500000 usect_delayed=112000 reason=VMSCAN_THROTTLE_NOPROGRESS
12 usec_timeout=500000 usect_delayed=116000 reason=VMSCAN_THROTTLE_NOPROGRESS
12 usec_timeout=500000 usect_delayed=144000 reason=VMSCAN_THROTTLE_NOPROGRESS
12 usec_timeout=500000 usect_delayed=152000 reason=VMSCAN_THROTTLE_NOPROGRESS
12 usec_timeout=500000 usect_delayed=264000 reason=VMSCAN_THROTTLE_NOPROGRESS
12 usec_timeout=500000 usect_delayed=384000 reason=VMSCAN_THROTTLE_NOPROGRESS
12 usec_timeout=500000 usect_delayed=424000 reason=VMSCAN_THROTTLE_NOPROGRESS
12 usec_timeout=500000 usect_delayed=492000 reason=VMSCAN_THROTTLE_NOPROGRESS
13 usec_timeout=500000 usect_delayed=184000 reason=VMSCAN_THROTTLE_NOPROGRESS
13 usec_timeout=500000 usect_delayed=444000 reason=VMSCAN_THROTTLE_NOPROGRESS
14 usec_timeout=500000 usect_delayed=308000 reason=VMSCAN_THROTTLE_NOPROGRESS
14 usec_timeout=500000 usect_delayed=440000 reason=VMSCAN_THROTTLE_NOPROGRESS
14 usec_timeout=500000 usect_delayed=476000 reason=VMSCAN_THROTTLE_NOPROGRESS
16 usec_timeout=500000 usect_delayed=140000 reason=VMSCAN_THROTTLE_NOPROGRESS
17 usec_timeout=500000 usect_delayed=232000 reason=VMSCAN_THROTTLE_NOPROGRESS
17 usec_timeout=500000 usect_delayed=240000 reason=VMSCAN_THROTTLE_NOPROGRESS
17 usec_timeout=500000 usect_delayed=280000 reason=VMSCAN_THROTTLE_NOPROGRESS
18 usec_timeout=500000 usect_delayed=404000 reason=VMSCAN_THROTTLE_NOPROGRESS
20 usec_timeout=500000 usect_delayed=148000 reason=VMSCAN_THROTTLE_NOPROGRESS
20 usec_timeout=500000 usect_delayed=216000 reason=VMSCAN_THROTTLE_NOPROGRESS
20 usec_timeout=500000 usect_delayed=468000 reason=VMSCAN_THROTTLE_NOPROGRESS
21 usec_timeout=500000 usect_delayed=448000 reason=VMSCAN_THROTTLE_NOPROGRESS
23 usec_timeout=500000 usect_delayed=168000 reason=VMSCAN_THROTTLE_NOPROGRESS
23 usec_timeout=500000 usect_delayed=296000 reason=VMSCAN_THROTTLE_NOPROGRESS
25 usec_timeout=500000 usect_delayed=132000 reason=VMSCAN_THROTTLE_NOPROGRESS
25 usec_timeout=500000 usect_delayed=352000 reason=VMSCAN_THROTTLE_NOPROGRESS
26 usec_timeout=500000 usect_delayed=180000 reason=VMSCAN_THROTTLE_NOPROGRESS
27 usec_timeout=500000 usect_delayed=284000 reason=VMSCAN_THROTTLE_NOPROGRESS
28 usec_timeout=500000 usect_delayed=164000 reason=VMSCAN_THROTTLE_NOPROGRESS
29 usec_timeout=500000 usect_delayed=136000 reason=VMSCAN_THROTTLE_NOPROGRESS
30 usec_timeout=500000 usect_delayed=200000 reason=VMSCAN_THROTTLE_NOPROGRESS
30 usec_timeout=500000 usect_delayed=400000 reason=VMSCAN_THROTTLE_NOPROGRESS
31 usec_timeout=500000 usect_delayed=196000 reason=VMSCAN_THROTTLE_NOPROGRESS
32 usec_timeout=500000 usect_delayed=156000 reason=VMSCAN_THROTTLE_NOPROGRESS
33 usec_timeout=500000 usect_delayed=224000 reason=VMSCAN_THROTTLE_NOPROGRESS
35 usec_timeout=500000 usect_delayed=128000 reason=VMSCAN_THROTTLE_NOPROGRESS
35 usec_timeout=500000 usect_delayed=176000 reason=VMSCAN_THROTTLE_NOPROGRESS
36 usec_timeout=500000 usect_delayed=368000 reason=VMSCAN_THROTTLE_NOPROGRESS
36 usec_timeout=500000 usect_delayed=496000 reason=VMSCAN_THROTTLE_NOPROGRESS
37 usec_timeout=500000 usect_delayed=312000 reason=VMSCAN_THROTTLE_NOPROGRESS
38 usec_timeout=500000 usect_delayed=304000 reason=VMSCAN_THROTTLE_NOPROGRESS
40 usec_timeout=500000 usect_delayed=288000 reason=VMSCAN_THROTTLE_NOPROGRESS
43 usec_timeout=500000 usect_delayed=408000 reason=VMSCAN_THROTTLE_NOPROGRESS
55 usec_timeout=500000 usect_delayed=416000 reason=VMSCAN_THROTTLE_NOPROGRESS
56 usec_timeout=500000 usect_delayed=76000 reason=VMSCAN_THROTTLE_NOPROGRESS
58 usec_timeout=500000 usect_delayed=120000 reason=VMSCAN_THROTTLE_NOPROGRESS
59 usec_timeout=500000 usect_delayed=208000 reason=VMSCAN_THROTTLE_NOPROGRESS
61 usec_timeout=500000 usect_delayed=68000 reason=VMSCAN_THROTTLE_NOPROGRESS
71 usec_timeout=500000 usect_delayed=192000 reason=VMSCAN_THROTTLE_NOPROGRESS
71 usec_timeout=500000 usect_delayed=480000 reason=VMSCAN_THROTTLE_NOPROGRESS
79 usec_timeout=500000 usect_delayed=60000 reason=VMSCAN_THROTTLE_NOPROGRESS
82 usec_timeout=500000 usect_delayed=320000 reason=VMSCAN_THROTTLE_NOPROGRESS
82 usec_timeout=500000 usect_delayed=92000 reason=VMSCAN_THROTTLE_NOPROGRESS
85 usec_timeout=500000 usect_delayed=64000 reason=VMSCAN_THROTTLE_NOPROGRESS
85 usec_timeout=500000 usect_delayed=80000 reason=VMSCAN_THROTTLE_NOPROGRESS
88 usec_timeout=500000 usect_delayed=84000 reason=VMSCAN_THROTTLE_NOPROGRESS
90 usec_timeout=500000 usect_delayed=160000 reason=VMSCAN_THROTTLE_NOPROGRESS
90 usec_timeout=500000 usect_delayed=292000 reason=VMSCAN_THROTTLE_NOPROGRESS
94 usec_timeout=500000 usect_delayed=56000 reason=VMSCAN_THROTTLE_NOPROGRESS
118 usec_timeout=500000 usect_delayed=88000 reason=VMSCAN_THROTTLE_NOPROGRESS
119 usec_timeout=500000 usect_delayed=72000 reason=VMSCAN_THROTTLE_NOPROGRESS
126 usec_timeout=500000 usect_delayed=108000 reason=VMSCAN_THROTTLE_NOPROGRESS
146 usec_timeout=500000 usect_delayed=52000 reason=VMSCAN_THROTTLE_NOPROGRESS
148 usec_timeout=500000 usect_delayed=36000 reason=VMSCAN_THROTTLE_NOPROGRESS
148 usec_timeout=500000 usect_delayed=48000 reason=VMSCAN_THROTTLE_NOPROGRESS
159 usec_timeout=500000 usect_delayed=28000 reason=VMSCAN_THROTTLE_NOPROGRESS
178 usec_timeout=500000 usect_delayed=44000 reason=VMSCAN_THROTTLE_NOPROGRESS
183 usec_timeout=500000 usect_delayed=40000 reason=VMSCAN_THROTTLE_NOPROGRESS
237 usec_timeout=500000 usect_delayed=100000 reason=VMSCAN_THROTTLE_NOPROGRESS
266 usec_timeout=500000 usect_delayed=32000 reason=VMSCAN_THROTTLE_NOPROGRESS
313 usec_timeout=500000 usect_delayed=24000 reason=VMSCAN_THROTTLE_NOPROGRESS
347 usec_timeout=500000 usect_delayed=96000 reason=VMSCAN_THROTTLE_NOPROGRESS
470 usec_timeout=500000 usect_delayed=20000 reason=VMSCAN_THROTTLE_NOPROGRESS
559 usec_timeout=500000 usect_delayed=16000 reason=VMSCAN_THROTTLE_NOPROGRESS
964 usec_timeout=500000 usect_delayed=12000 reason=VMSCAN_THROTTLE_NOPROGRESS
2001 usec_timeout=500000 usect_delayed=104000 reason=VMSCAN_THROTTLE_NOPROGRESS
2447 usec_timeout=500000 usect_delayed=8000 reason=VMSCAN_THROTTLE_NOPROGRESS
7888 usec_timeout=500000 usect_delayed=4000 reason=VMSCAN_THROTTLE_NOPROGRESS
22727 usec_timeout=500000 usect_delayed=0 reason=VMSCAN_THROTTLE_NOPROGRESS
51305 usec_timeout=500000 usect_delayed=500000 reason=VMSCAN_THROTTLE_NOPROGRESS
The full timeout is often hit but a large number also do not stall at
all. The remainder slept a little allowing other reclaim tasks to make
progress.
While this timeout could be further increased, it could also negatively
impact worst-case behaviour when there is no prioritisation of what task
should make progress.
For VMSCAN_THROTTLE_WRITEBACK, the breakdown was
1 usec_timeout=100000 usect_delayed=44000 reason=VMSCAN_THROTTLE_WRITEBACK
2 usec_timeout=100000 usect_delayed=76000 reason=VMSCAN_THROTTLE_WRITEBACK
3 usec_timeout=100000 usect_delayed=80000 reason=VMSCAN_THROTTLE_WRITEBACK
5 usec_timeout=100000 usect_delayed=48000 reason=VMSCAN_THROTTLE_WRITEBACK
5 usec_timeout=100000 usect_delayed=84000 reason=VMSCAN_THROTTLE_WRITEBACK
6 usec_timeout=100000 usect_delayed=72000 reason=VMSCAN_THROTTLE_WRITEBACK
7 usec_timeout=100000 usect_delayed=88000 reason=VMSCAN_THROTTLE_WRITEBACK
11 usec_timeout=100000 usect_delayed=56000 reason=VMSCAN_THROTTLE_WRITEBACK
12 usec_timeout=100000 usect_delayed=64000 reason=VMSCAN_THROTTLE_WRITEBACK
16 usec_timeout=100000 usect_delayed=92000 reason=VMSCAN_THROTTLE_WRITEBACK
24 usec_timeout=100000 usect_delayed=68000 reason=VMSCAN_THROTTLE_WRITEBACK
28 usec_timeout=100000 usect_delayed=32000 reason=VMSCAN_THROTTLE_WRITEBACK
30 usec_timeout=100000 usect_delayed=60000 reason=VMSCAN_THROTTLE_WRITEBACK
30 usec_timeout=100000 usect_delayed=96000 reason=VMSCAN_THROTTLE_WRITEBACK
32 usec_timeout=100000 usect_delayed=52000 reason=VMSCAN_THROTTLE_WRITEBACK
42 usec_timeout=100000 usect_delayed=40000 reason=VMSCAN_THROTTLE_WRITEBACK
77 usec_timeout=100000 usect_delayed=28000 reason=VMSCAN_THROTTLE_WRITEBACK
99 usec_timeout=100000 usect_delayed=36000 reason=VMSCAN_THROTTLE_WRITEBACK
137 usec_timeout=100000 usect_delayed=24000 reason=VMSCAN_THROTTLE_WRITEBACK
190 usec_timeout=100000 usect_delayed=20000 reason=VMSCAN_THROTTLE_WRITEBACK
339 usec_timeout=100000 usect_delayed=16000 reason=VMSCAN_THROTTLE_WRITEBACK
518 usec_timeout=100000 usect_delayed=12000 reason=VMSCAN_THROTTLE_WRITEBACK
852 usec_timeout=100000 usect_delayed=8000 reason=VMSCAN_THROTTLE_WRITEBACK
3359 usec_timeout=100000 usect_delayed=4000 reason=VMSCAN_THROTTLE_WRITEBACK
7147 usec_timeout=100000 usect_delayed=0 reason=VMSCAN_THROTTLE_WRITEBACK
83962 usec_timeout=100000 usect_delayed=100000 reason=VMSCAN_THROTTLE_WRITEBACK
The majority hit the timeout in direct reclaim context although a
sizable number did not stall at all. This is very different to kswapd
where only a tiny percentage of stalls due to writeback reached the
timeout.
Bottom line, the throttling appears to work and the wakeup events may
limit worst case stalls. There might be some grounds for adjusting
timeouts but it's likely futile as the worst-case scenarios depend on
the workload, memory size and the speed of the storage. A better
approach to improve the series further would be to prioritise tasks
based on their rate of allocation with the caveat that it may be very
expensive to track.
This patch (of 5):
Page reclaim throttles on wait_iff_congested under the following
conditions:
- kswapd is encountering pages under writeback and marked for immediate
reclaim implying that pages are cycling through the LRU faster than
pages can be cleaned.
- Direct reclaim will stall if all dirty pages are backed by congested
inodes.
wait_iff_congested is almost completely broken with few exceptions.
This patch adds a new node-based workqueue and tracks the number of
throttled tasks and pages written back since throttling started. If
enough pages belonging to the node are written back then the throttled
tasks will wake early. If not, the throttled tasks sleeps until the
timeout expires.
[neilb@suse.de: Uninterruptible sleep and simpler wakeups]
[hdanton@sina.com: Avoid race when reclaim starts]
[vbabka@suse.cz: vmstat irq-safe api, clarifications]
Link: https://lore.kernel.org/linux-mm/45d8b7a6-8548-65f5-cccf-9f451d4ae3d4@kernel.dk/ [1]
Link: https://lkml.kernel.org/r/20211022144651.19914-1-mgorman@techsingularity.net
Link: https://lkml.kernel.org/r/20211022144651.19914-2-mgorman@techsingularity.net
Signed-off-by: Mel Gorman <mgorman@techsingularity.net>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: NeilBrown <neilb@suse.de>
Cc: "Theodore Ts'o" <tytso@mit.edu>
Cc: Andreas Dilger <adilger.kernel@dilger.ca>
Cc: "Darrick J . Wong" <djwong@kernel.org>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Rik van Riel <riel@surriel.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
||
Yang Shi
|
e0f43fa506 |
mm: filemap: coding style cleanup for filemap_map_pmd()
Patch series "Solve silent data loss caused by poisoned page cache (shmem/tmpfs)", v5.
When discussing the patch that splits page cache THP in order to offline
the poisoned page, Noaya mentioned there is a bigger problem [1] that
prevents this from working since the page cache page will be truncated
if uncorrectable errors happen. By looking this deeper it turns out
this approach (truncating poisoned page) may incur silent data loss for
all non-readonly filesystems if the page is dirty. It may be worse for
in-memory filesystem, e.g. shmem/tmpfs since the data blocks are
actually gone.
To solve this problem we could keep the poisoned dirty page in page
cache then notify the users on any later access, e.g. page fault,
read/write, etc. The clean page could be truncated as is since they can
be reread from disk later on.
The consequence is the filesystems may find poisoned page and manipulate
it as healthy page since all the filesystems actually don't check if the
page is poisoned or not in all the relevant paths except page fault. In
general, we need make the filesystems be aware of poisoned page before
we could keep the poisoned page in page cache in order to solve the data
loss problem.
To make filesystems be aware of poisoned page we should consider:
- The page should be not written back: clearing dirty flag could
prevent from writeback.
- The page should not be dropped (it shows as a clean page) by drop
caches or other callers: the refcount pin from hwpoison could prevent
from invalidating (called by cache drop, inode cache shrinking, etc),
but it doesn't avoid invalidation in DIO path.
- The page should be able to get truncated/hole punched/unlinked: it
works as it is.
- Notify users when the page is accessed, e.g. read/write, page fault
and other paths (compression, encryption, etc).
The scope of the last one is huge since almost all filesystems need do
it once a page is returned from page cache lookup. There are a couple
of options to do it:
1. Check hwpoison flag for every path, the most straightforward way.
2. Return NULL for poisoned page from page cache lookup, the most
callsites check if NULL is returned, this should have least work I
think. But the error handling in filesystems just return -ENOMEM,
the error code will incur confusion to the users obviously.
3. To improve #2, we could return error pointer, e.g. ERR_PTR(-EIO),
but this will involve significant amount of code change as well
since all the paths need check if the pointer is ERR or not just
like option #1.
I did prototypes for both #1 and #3, but it seems #3 may require more
changes than #1. For #3 ERR_PTR will be returned so all the callers
need to check the return value otherwise invalid pointer may be
dereferenced, but not all callers really care about the content of the
page, for example, partial truncate which just sets the truncated range
in one page to 0. So for such paths it needs additional modification if
ERR_PTR is returned. And if the callers have their own way to handle
the problematic pages we need to add a new FGP flag to tell FGP
functions to return the pointer to the page.
It may happen very rarely, but once it happens the consequence (data
corruption) could be very bad and it is very hard to debug. It seems
this problem had been slightly discussed before, but seems no action was
taken at that time. [2]
As the aforementioned investigation, it needs huge amount of work to
solve the potential data loss for all filesystems. But it is much
easier for in-memory filesystems and such filesystems actually suffer
more than others since even the data blocks are gone due to truncating.
So this patchset starts from shmem/tmpfs by taking option #1.
TODO:
* The unpoison has been broken since commit
|
||
Qi Zheng
|
03c4f20454 |
mm: introduce pmd_install() helper
Patch series "Do some code cleanups related to mm", v3. This patch (of 2): Currently we have three times the same few lines repeated in the code. Deduplicate them by newly introduced pmd_install() helper. Link: https://lkml.kernel.org/r/20210901102722.47686-1-zhengqi.arch@bytedance.com Link: https://lkml.kernel.org/r/20210901102722.47686-2-zhengqi.arch@bytedance.com Signed-off-by: Qi Zheng <zhengqi.arch@bytedance.com> Reviewed-by: David Hildenbrand <david@redhat.com> Reviewed-by: Muchun Song <songmuchun@bytedance.com> Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@kernel.org> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Cc: Mika Penttila <mika.penttila@nextfour.com> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
Jens Axboe
|
f8ee8909ac |
mm: move more expensive part of XA setup out of mapping check
The fast path here is not needing any writeback, yet we spend time setting up the xarray lookup data upfront. Move the part that actually needs to iterate the address space mapping into a separate helper, saving ~30% of the time here. Link: https://lkml.kernel.org/r/49f67983-b802-8929-edab-d807f745c9ca@kernel.dk Signed-off-by: Jens Axboe <axboe@kernel.dk> Cc: Matthew Wilcox <willy@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
Matthew Wilcox (Oracle)
|
d417b49fff |
mm/filemap.c: remove bogus VM_BUG_ON
It is not safe to check page->index without holding the page lock. It
can be changed if the page is moved between the swap cache and the page
cache for a shmem file, for example. There is a VM_BUG_ON below which
checks page->index is correct after taking the page lock.
Link: https://lkml.kernel.org/r/20210818144932.940640-1-willy@infradead.org
Fixes:
|
||
|
Jens Axboe
|
61d0017e5a |
mm: don't read i_size of inode unless we need it
We always go through i_size_read(), and we rarely end up needing it. Push the read to down where we need to check it, which avoids it for most cases. It looks like we can even remove this check entirely, which might be worth pursuing. But at least this takes it out of the hot path. Link: https://lkml.kernel.org/r/6b67981f-57d4-c80e-bc07-6020aa601381@kernel.dk Signed-off-by: Jens Axboe <axboe@kernel.dk> Acked-by: Chris Mason <clm@fb.com> Cc: Josef Bacik <josef@redhat.com> Cc: Dave Chinner <david@fromorbit.com> Cc: Pavel Begunkov <asml.silence@gmail.com> Cc: Jan Kara <jack@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
David Howells
|
8c8387ee3f |
mm: stop filemap_read() from grabbing a superfluous page
Under some circumstances, filemap_read() will allocate sufficient pages to read to the end of the file, call readahead/readpages on them and copy the data over - and then it will allocate another page at the EOF and call readpage on that and then ignore it. This is unnecessary and a waste of time and resources. filemap_read() *does* check for this, but only after it has already done the allocation and I/O. Fix this by checking before calling filemap_get_pages() also. Link: https://lkml.kernel.org/r/163472463105.3126792.7056099385135786492.stgit@warthog.procyon.org.uk Link: https://lore.kernel.org/r/160588481358.3465195.16552616179674485179.stgit@warthog.procyon.org.uk/ Link: https://lore.kernel.org/r/163456863216.2614702.6384850026368833133.stgit@warthog.procyon.org.uk/ Signed-off-by: David Howells <dhowells@redhat.com> Acked-by: Jeff Layton <jlayton@kernel.org> Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Kent Overstreet <kent.overstreet@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Linus Torvalds
|
c03098d4b9 |
gfs2: Fix mmap + page fault deadlocks
Functions gfs2_file_read_iter and gfs2_file_write_iter are both
accessing the user buffer to write to or read from while holding the
inode glock. In the most basic scenario, that buffer will not be
resident and it will be mapped to the same file. Accessing the buffer
will trigger a page fault, and gfs2 will deadlock trying to take the
same inode glock again while trying to handle that fault.
Fix that and similar, more complex scenarios by disabling page faults
while accessing user buffers. To make this work, introduce a small
amount of new infrastructure and fix some bugs that didn't trigger so
far, with page faults enabled.
-----BEGIN PGP SIGNATURE-----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=WeNd
-----END PGP SIGNATURE-----
Merge tag 'gfs2-v5.15-rc5-mmap-fault' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2
Pull gfs2 mmap + page fault deadlocks fixes from Andreas Gruenbacher:
"Functions gfs2_file_read_iter and gfs2_file_write_iter are both
accessing the user buffer to write to or read from while holding the
inode glock.
In the most basic deadlock scenario, that buffer will not be resident
and it will be mapped to the same file. Accessing the buffer will
trigger a page fault, and gfs2 will deadlock trying to take the same
inode glock again while trying to handle that fault.
Fix that and similar, more complex scenarios by disabling page faults
while accessing user buffers. To make this work, introduce a small
amount of new infrastructure and fix some bugs that didn't trigger so
far, with page faults enabled"
* tag 'gfs2-v5.15-rc5-mmap-fault' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2:
gfs2: Fix mmap + page fault deadlocks for direct I/O
iov_iter: Introduce nofault flag to disable page faults
gup: Introduce FOLL_NOFAULT flag to disable page faults
iomap: Add done_before argument to iomap_dio_rw
iomap: Support partial direct I/O on user copy failures
iomap: Fix iomap_dio_rw return value for user copies
gfs2: Fix mmap + page fault deadlocks for buffered I/O
gfs2: Eliminate ip->i_gh
gfs2: Move the inode glock locking to gfs2_file_buffered_write
gfs2: Introduce flag for glock holder auto-demotion
gfs2: Clean up function may_grant
gfs2: Add wrapper for iomap_file_buffered_write
iov_iter: Introduce fault_in_iov_iter_writeable
iov_iter: Turn iov_iter_fault_in_readable into fault_in_iov_iter_readable
gup: Turn fault_in_pages_{readable,writeable} into fault_in_{readable,writeable}
powerpc/kvm: Fix kvm_use_magic_page
iov_iter: Fix iov_iter_get_pages{,_alloc} page fault return value
|
||
|
Linus Torvalds
|
33c8846c81 |
for-5.16/block-2021-10-29
-----BEGIN PGP SIGNATURE----- iQJEBAABCAAuFiEEwPw5LcreJtl1+l5K99NY+ylx4KYFAmF8KDgQHGF4Ym9lQGtl cm5lbC5kawAKCRD301j7KXHgpmQ2D/wO0nH3U+3+OZChi3XUwYck9Dev3o6BANCF ClATiK/kivZY0xY1r8J4ixirZo2gcjIMpWSC3JGYZ5LdspfmYGLUbMjfZsaeU23i lAKaX1IqfArmHN76k3IU1bKCg7B0/LFwC0q9QTFWTSwNSs8RK/EZLJ61U1hEXUb3 OfIpaMmvPiMaU7yuPqhcZK14m1cg1srrLM4rFB/PqsWWStF07pHq32WeArGDAU0e Fe0YSnYD7qqA5Qc37KwqjCTmmxKX5YZf7etIcA6p3DNmwcuQrVNzKoCH/ZEDijaD E2bS/BWbN1x96+rtoEZfBYEaNIrkmJzmW6+fJ53OITbJF3KqP6V66erhqNcFYCzC mhFlRe7voXb/8AP7zQqSIhK529BUBM36sQ6nF7EiQcDrfLc1z39mq6eblUxbknIA DDPISD5Tseik9N9x0bc7vINseKyHI1E90VAU/XKADcuGbzLvehPx+2p+Iq5ch5Ah oa1G3RdlWWQOZxphJHWJhu1qMfo5+FP9dFZj1aoo7b8Kbc/CedyoQe71cpIE5wNh Jj/EpWJnuyKXwuTic2VYGC+6ezM9O5DSdqCfP3YuZky95VESyvRCKJYMMgBYRVdC /LuxhnBXIY2G8An7ZTnX0kLCCvLbapIwa0NyA98/xeOngO843coJ6wn8ZmE9LJNH kMmpCygUrA== =QWC+ -----END PGP SIGNATURE----- Merge tag 'for-5.16/block-2021-10-29' of git://git.kernel.dk/linux-block Pull block updates from Jens Axboe: - mq-deadline accounting improvements (Bart) - blk-wbt timer fix (Andrea) - Untangle the block layer includes (Christoph) - Rework the poll support to be bio based, which will enable adding support for polling for bio based drivers (Christoph) - Block layer core support for multi-actuator drives (Damien) - blk-crypto improvements (Eric) - Batched tag allocation support (me) - Request completion batching support (me) - Plugging improvements (me) - Shared tag set improvements (John) - Concurrent queue quiesce support (Ming) - Cache bdev in ->private_data for block devices (Pavel) - bdev dio improvements (Pavel) - Block device invalidation and block size improvements (Xie) - Various cleanups, fixes, and improvements (Christoph, Jackie, Masahira, Tejun, Yu, Pavel, Zheng, me) * tag 'for-5.16/block-2021-10-29' of git://git.kernel.dk/linux-block: (174 commits) blk-mq-debugfs: Show active requests per queue for shared tags block: improve readability of blk_mq_end_request_batch() virtio-blk: Use blk_validate_block_size() to validate block size loop: Use blk_validate_block_size() to validate block size nbd: Use blk_validate_block_size() to validate block size block: Add a helper to validate the block size block: re-flow blk_mq_rq_ctx_init() block: prefetch request to be initialized block: pass in blk_mq_tags to blk_mq_rq_ctx_init() block: add rq_flags to struct blk_mq_alloc_data block: add async version of bio_set_polled block: kill DIO_MULTI_BIO block: kill unused polling bits in __blkdev_direct_IO() block: avoid extra iter advance with async iocb block: Add independent access ranges support blk-mq: don't issue request directly in case that current is to be blocked sbitmap: silence data race warning blk-cgroup: synchronize blkg creation against policy deactivation block: refactor bio_iov_bvec_set() block: add single bio async direct IO helper ... |
||
Andreas Gruenbacher
|
a6294593e8 |
iov_iter: Turn iov_iter_fault_in_readable into fault_in_iov_iter_readable
Turn iov_iter_fault_in_readable into a function that returns the number of bytes not faulted in, similar to copy_to_user, instead of returning a non-zero value when any of the requested pages couldn't be faulted in. This supports the existing users that require all pages to be faulted in as well as new users that are happy if any pages can be faulted in. Rename iov_iter_fault_in_readable to fault_in_iov_iter_readable to make sure this change doesn't silently break things. Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com> |
||
|
Andreas Gruenbacher
|
bb523b406c |
gup: Turn fault_in_pages_{readable,writeable} into fault_in_{readable,writeable}
Turn fault_in_pages_{readable,writeable} into versions that return the
number of bytes not faulted in, similar to copy_to_user, instead of
returning a non-zero value when any of the requested pages couldn't be
faulted in. This supports the existing users that require all pages to
be faulted in as well as new users that are happy if any pages can be
faulted in.
Rename the functions to fault_in_{readable,writeable} to make sure
this change doesn't silently break things.
Neither of these functions is entirely trivial and it doesn't seem
useful to inline them, so move them to mm/gup.c.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
|
||
Christoph Hellwig
|
518d55051a |
mm: remove spurious blkdev.h includes
Various files have acquired spurious includes of <linux/blkdev.h> over time. Remove them. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Link: https://lore.kernel.org/r/20210920123328.1399408-5-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk> |
||
|
Matthew Wilcox (Oracle)
|
b27652d935 |
mm/filemap: Add FGP_STABLE
Allow filemap_get_folio() to wait for writeback to complete (if the filesystem wants that behaviour). This is the folio equivalent of grab_cache_page_write_begin(), which is moved into the folio-compat file as a reminder to migrate all the code using it. This paves the way for getting rid of AOP_FLAG_NOFS once grab_cache_page_write_begin() is removed. Kernel grows by 11 bytes. filemap_get_folio() grows by 33 bytes but grab_cache_page_write_begin() shrinks by 22 bytes to make up for it. Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> Reviewed-by: David Howells <dhowells@redhat.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> |
||
|
Matthew Wilcox (Oracle)
|
3f0c6a07fe |
mm/filemap: Add filemap_get_folio
filemap_get_folio() is a replacement for find_get_page(). Turn pagecache_get_page() into a wrapper around __filemap_get_folio(). Remove find_lock_head() as this use case is now covered by filemap_get_folio(). Reduces overall kernel size by 209 bytes. __filemap_get_folio() is 316 bytes shorter than pagecache_get_page() was, but the new pagecache_get_page() wrapper is 99 bytes. Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> Reviewed-by: David Howells <dhowells@redhat.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> |
||
|
Matthew Wilcox (Oracle)
|
bca65eeab1 |
mm/filemap: Convert mapping_get_entry to return a folio
The pagecache only contains folios, so indicate that this is definitely not a tail page. Shrinks mapping_get_entry() by 56 bytes, but grows pagecache_get_page() by 21 bytes as gcc makes slightly different hot/cold code decisions. A net reduction of 35 bytes of text. Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: David Howells <dhowells@redhat.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> |
||
|
Matthew Wilcox (Oracle)
|
9dd3d06940 |
mm/filemap: Add filemap_add_folio()
Convert __add_to_page_cache_locked() into __filemap_add_folio(). Add an assertion to it that (for !hugetlbfs), the folio is naturally aligned within the file. Move the prototype from mm.h to pagemap.h. Convert add_to_page_cache_lru() into filemap_add_folio(). Add a compatibility wrapper for unconverted callers. Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: David Howells <dhowells@redhat.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> |
||
|
Matthew Wilcox (Oracle)
|
bb3c579e25 |
mm/filemap: Add filemap_alloc_folio
Reimplement __page_cache_alloc as a wrapper around filemap_alloc_folio to allow filesystems to be converted at our leisure. Increases kernel text size by 133 bytes, mostly in cachefiles_read_backing_file(). pagecache_get_page() shrinks by 32 bytes, though. Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: David Howells <dhowells@redhat.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> |
||
|
Matthew Wilcox (Oracle)
|
0995d7e568 |
mm/workingset: Convert workingset_refault() to take a folio
This nets us 178 bytes of savings from removing calls to compound_head. The three callers all grow a little, but each of them will be converted to use folios soon, so that's fine. Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: David Howells <dhowells@redhat.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> |
||
|
Matthew Wilcox (Oracle)
|
269ccca389 |
mm/writeback: Add __folio_end_writeback()
test_clear_page_writeback() is actually an mm-internal function, although it's named as if it's a pagecache function. Move it to mm/internal.h, rename it to __folio_end_writeback() and change the return type to bool. The conversion from page to folio is mostly about accounting the number of pages being written back, although it does eliminate a couple of calls to compound_head(). Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: David Howells <dhowells@redhat.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> |
||
|
Matthew Wilcox (Oracle)
|
d21bba2b7d |
mm/memcg: Convert mem_cgroup_migrate() to take folios
Convert all callers of mem_cgroup_migrate() to call page_folio() first. They all look like they're using head pages already, but this proves it. Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Acked-by: Mike Rapoport <rppt@linux.ibm.com> Reviewed-by: David Howells <dhowells@redhat.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> |
||
|
Matthew Wilcox (Oracle)
|
bbc6b703b2 |
mm/memcg: Convert mem_cgroup_uncharge() to take a folio
Convert all the callers to call page_folio(). Most of them were already using a head page, but a few of them I can't prove were, so this may actually fix a bug. Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Acked-by: Mike Rapoport <rppt@linux.ibm.com> Reviewed-by: David Howells <dhowells@redhat.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> |
||
|
Matthew Wilcox (Oracle)
|
8f425e4ed0 |
mm/memcg: Convert mem_cgroup_charge() to take a folio
Convert all callers of mem_cgroup_charge() to call page_folio() on the page they're currently passing in. Many of them will be converted to use folios themselves soon. Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: David Howells <dhowells@redhat.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> |
||
|
Matthew Wilcox (Oracle)
|
b47393f844 |
mm/filemap: Add folio private_2 functions
end_page_private_2() becomes folio_end_private_2(), wait_on_page_private_2() becomes folio_wait_private_2() and wait_on_page_private_2_killable() becomes folio_wait_private_2_killable(). Adjust the fscache equivalents to call page_folio() before calling these functions to avoid adding wrappers. Ends up costing 1 byte of text in ceph & netfs, but the core shrinks by three calls to page_folio(). Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> Acked-by: Vlastimil Babka <vbabka@suse.cz> Reviewed-by: William Kucharski <william.kucharski@oracle.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: David Howells <dhowells@redhat.com> Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> |
||
|
Matthew Wilcox (Oracle)
|
df4d4f1273 |
mm/filemap: Convert page wait queues to be folios
Reinforce that page flags are actually in the head page by changing the type from page to folio. Increases the size of cachefiles by two bytes, but the kernel core is unchanged in size. Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Acked-by: Jeff Layton <jlayton@kernel.org> Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Reviewed-by: William Kucharski <william.kucharski@oracle.com> Reviewed-by: David Howells <dhowells@redhat.com> |
||
|
Matthew Wilcox (Oracle)
|
6974d7c977 |
mm/filemap: Add folio_wake_bit()
Convert wake_up_page_bit() to folio_wake_bit(). All callers have a folio, so use it directly. Saves 66 bytes of text in end_page_private_2(). Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Acked-by: Jeff Layton <jlayton@kernel.org> Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Reviewed-by: William Kucharski <william.kucharski@oracle.com> Reviewed-by: David Howells <dhowells@redhat.com> Acked-by: Mike Rapoport <rppt@linux.ibm.com> |
||
|
Matthew Wilcox (Oracle)
|
101c0bf67f |
mm/filemap: Add folio_wait_bit()
Rename wait_on_page_bit() to folio_wait_bit(). We must always wait on the folio, otherwise we won't be woken up due to the tail page hashing to a different bucket from the head page. This commit shrinks the kernel by 770 bytes, mostly due to moving the page waitqueue lookup into folio_wait_bit_common(). Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Acked-by: Jeff Layton <jlayton@kernel.org> Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Reviewed-by: William Kucharski <william.kucharski@oracle.com> Reviewed-by: David Howells <dhowells@redhat.com> Acked-by: Mike Rapoport <rppt@linux.ibm.com> |
||
|
Matthew Wilcox (Oracle)
|
4268b48077 |
mm/filemap: Add folio_end_writeback()
Add an end_page_writeback() wrapper function for users that are not yet converted to folios. folio_end_writeback() is less than half the size of end_page_writeback() at just 105 bytes compared to 228 bytes, due to removing all the compound_head() calls. The 30 byte wrapper function makes this a net saving of 93 bytes. Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Acked-by: Jeff Layton <jlayton@kernel.org> Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Reviewed-by: William Kucharski <william.kucharski@oracle.com> Reviewed-by: David Howells <dhowells@redhat.com> Acked-by: Mike Rapoport <rppt@linux.ibm.com> |
||
|
Matthew Wilcox (Oracle)
|
575ced1c8b |
mm/swap: Add folio_rotate_reclaimable()
Convert rotate_reclaimable_page() to folio_rotate_reclaimable(). This eliminates all five of the calls to compound_head() in this function, saving 75 bytes at the cost of adding 15 bytes to its one caller, end_page_writeback(). We also save 36 bytes from pagevec_move_tail_fn() due to using folios there. Net 96 bytes savings. Also move its declaration to mm/internal.h as it's only used by filemap.c. Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> Acked-by: Vlastimil Babka <vbabka@suse.cz> Reviewed-by: William Kucharski <william.kucharski@oracle.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Mike Rapoport <rppt@linux.ibm.com> Reviewed-by: David Howells <dhowells@redhat.com> |
||
|
Matthew Wilcox (Oracle)
|
9138e47ed4 |
mm/filemap: Add __folio_lock_or_retry()
Convert __lock_page_or_retry() to __folio_lock_or_retry(). This actually saves 4 bytes in the only caller of lock_page_or_retry() (due to better register allocation) and saves the 14 byte cost of calling page_folio() in __folio_lock_or_retry() for a total saving of 18 bytes. Also use a bool for the return type. Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Acked-by: Jeff Layton <jlayton@kernel.org> Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Reviewed-by: William Kucharski <william.kucharski@oracle.com> Acked-by: Mike Rapoport <rppt@linux.ibm.com> Reviewed-by: David Howells <dhowells@redhat.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> |
||
|
Matthew Wilcox (Oracle)
|
6baa8d602e |
mm/filemap: Add folio_wait_locked()
Also add folio_wait_locked_killable(). Turn wait_on_page_locked() and wait_on_page_locked_killable() into wrappers. This eliminates a call to compound_head() from each call-site, reducing text size by 193 bytes for me. Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Acked-by: Jeff Layton <jlayton@kernel.org> Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Reviewed-by: William Kucharski <william.kucharski@oracle.com> Reviewed-by: David Howells <dhowells@redhat.com> Acked-by: Mike Rapoport <rppt@linux.ibm.com> |
||
|
Matthew Wilcox (Oracle)
|
ffdc8dabf2 |
mm/filemap: Add __folio_lock_async()
There aren't any actual callers of lock_page_async(), so remove it. Convert filemap_update_page() to call __folio_lock_async(). __folio_lock_async() is 21 bytes smaller than __lock_page_async(), but the real savings come from using a folio in filemap_update_page(), shrinking it from 515 bytes to 404 bytes, saving 110 bytes. The text shrinks by 132 bytes in total. Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Acked-by: Jeff Layton <jlayton@kernel.org> Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Reviewed-by: William Kucharski <william.kucharski@oracle.com> Reviewed-by: David Howells <dhowells@redhat.com> Acked-by: Mike Rapoport <rppt@linux.ibm.com> |
||
|
Matthew Wilcox (Oracle)
|
af7f29d9e1 |
mm/filemap: Add folio_lock_killable()
This is like lock_page_killable() but for use by callers who know they have a folio. Convert __lock_page_killable() to be __folio_lock_killable(). This saves one call to compound_head() per contended call to lock_page_killable(). __folio_lock_killable() is 19 bytes smaller than __lock_page_killable() was. filemap_fault() shrinks by 74 bytes and __lock_page_or_retry() shrinks by 71 bytes. That's a total of 164 bytes of text saved. Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Acked-by: Jeff Layton <jlayton@kernel.org> Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Reviewed-by: William Kucharski <william.kucharski@oracle.com> Acked-by: Mike Rapoport <rppt@linux.ibm.com> Reviewed-by: David Howells <dhowells@redhat.com> |
||
|
Matthew Wilcox (Oracle)
|
7c23c782d5 |
mm/filemap: Add folio_lock()
This is like lock_page() but for use by callers who know they have a folio. Convert __lock_page() to be __folio_lock(). This saves one call to compound_head() per contended call to lock_page(). Saves 455 bytes of text; mostly from improved register allocation and inlining decisions. __folio_lock is 59 bytes while __lock_page was 79. Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Acked-by: Jeff Layton <jlayton@kernel.org> Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Reviewed-by: William Kucharski <william.kucharski@oracle.com> Reviewed-by: David Howells <dhowells@redhat.com> Acked-by: Mike Rapoport <rppt@linux.ibm.com> |
||
|
Matthew Wilcox (Oracle)
|
4e1364286d |
mm/filemap: Add folio_unlock()
Convert unlock_page() to call folio_unlock(). By using a folio we avoid a call to compound_head(). This shortens the function from 39 bytes to 25 and removes 4 instructions on x86-64. Because we still have unlock_page(), it's a net increase of 16 bytes of text for the kernel as a whole, but any path that uses folio_unlock() will execute 4 fewer instructions. Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Acked-by: Jeff Layton <jlayton@kernel.org> Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Reviewed-by: William Kucharski <william.kucharski@oracle.com> Reviewed-by: David Howells <dhowells@redhat.com> Acked-by: Mike Rapoport <rppt@linux.ibm.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> |
||
|
Matthew Wilcox (Oracle)
|
020853b6f5 |
mm: Add folio_try_get_rcu()
This is the equivalent of page_cache_get_speculative(). Also add folio_ref_try_add_rcu (the equivalent of page_cache_add_speculative) and folio_get_unless_zero() (the equivalent of get_page_unless_zero()). The new kernel-doc attempts to explain from the user's point of view when to use folio_try_get_rcu() and when to use folio_get_unless_zero(), because there seems to be some confusion currently between the users of page_cache_get_speculative() and get_page_unless_zero(). Reimplement page_cache_add_speculative() and page_cache_get_speculative() as wrappers around the folio equivalents, but leave get_page_unless_zero() alone for now. This commit reduces text size by 3 bytes due to slightly different register allocation & instruction selections. Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> Acked-by: Vlastimil Babka <vbabka@suse.cz> Reviewed-by: William Kucharski <william.kucharski@oracle.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Mike Rapoport <rppt@linux.ibm.com> |
||
|
Linus Torvalds
|
14726903c8 |
Merge branch 'akpm' (patches from Andrew)
Merge misc updates from Andrew Morton: "173 patches. Subsystems affected by this series: ia64, ocfs2, block, and mm (debug, pagecache, gup, swap, shmem, memcg, selftests, pagemap, mremap, bootmem, sparsemem, vmalloc, kasan, pagealloc, memory-failure, hugetlb, userfaultfd, vmscan, compaction, mempolicy, memblock, oom-kill, migration, ksm, percpu, vmstat, and madvise)" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (173 commits) mm/madvise: add MADV_WILLNEED to process_madvise() mm/vmstat: remove unneeded return value mm/vmstat: simplify the array size calculation mm/vmstat: correct some wrong comments mm/percpu,c: remove obsolete comments of pcpu_chunk_populated() selftests: vm: add COW time test for KSM pages selftests: vm: add KSM merging time test mm: KSM: fix data type selftests: vm: add KSM merging across nodes test selftests: vm: add KSM zero page merging test selftests: vm: add KSM unmerge test selftests: vm: add KSM merge test mm/migrate: correct kernel-doc notation mm: wire up syscall process_mrelease mm: introduce process_mrelease system call memblock: make memblock_find_in_range method private mm/mempolicy.c: use in_task() in mempolicy_slab_node() mm/mempolicy: unify the create() func for bind/interleave/prefer-many policies mm/mempolicy: advertise new MPOL_PREFERRED_MANY mm/hugetlb: add support for mempolicy MPOL_PREFERRED_MANY ... |
||
|
Johannes Weiner
|
3047250972 |
mm: remove irqsave/restore locking from contexts with irqs enabled
The page cache deletion paths all have interrupts enabled, so no need to use irqsafe/irqrestore locking variants. They used to have irqs disabled by the memcg lock added in commit |
||
|
Linus Torvalds
|
87045e6546 |
for-5.15-tag
-----BEGIN PGP SIGNATURE-----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=ALO9
-----END PGP SIGNATURE-----
Merge tag 'for-5.15-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs updates from David Sterba:
"The highlights of this round are integrations with fs-verity and
idmapped mounts, the rest is usual mix of minor improvements, speedups
and cleanups.
There are some patches outside of btrfs, namely updating some VFS
interfaces, all straightforward and acked.
Features:
- fs-verity support, using standard ioctls, backward compatible with
read-only limitation on inodes with previously enabled fs-verity
- idmapped mount support
- make mount with rescue=ibadroots more tolerant to partially damaged
trees
- allow raid0 on a single device and raid10 on two devices,
degenerate cases but might be useful as an intermediate step during
conversion to other profiles
- zoned mode block group auto reclaim can be disabled via sysfs knob
Performance improvements:
- continue readahead of node siblings even if target node is in
memory, could speed up full send (on sample test +11%)
- batching of delayed items can speed up creating many files
- fsync/tree-log speedups
- avoid unnecessary work (gains +2% throughput, -2% run time on
sample load)
- reduced lock contention on renames (on dbench +4% throughput,
up to -30% latency)
Fixes:
- various zoned mode fixes
- preemptive flushing threshold tuning, avoid excessive work on
almost full filesystems
Core:
- continued subpage support, preparation for implementing remaining
features like compression and defragmentation; with some
limitations, write is now enabled on 64K page systems with 4K
sectors, still considered experimental
- no readahead on compressed reads
- inline extents disabled
- disabled raid56 profile conversion and mount
- improved flushing logic, fixing early ENOSPC on some workloads
- inode flags have been internally split to read-only and read-write
incompat bit parts, used by fs-verity
- new tree items for fs-verity
- descriptor item
- Merkle tree item
- inode operations extended to be namespace-aware
- cleanups and refactoring
Generic code changes:
- fs: new export filemap_fdatawrite_wbc
- fs: removed sync_inode
- block: bio_trim argument type fixups
- vfs: add namespace-aware lookup"
* tag 'for-5.15-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: (114 commits)
btrfs: reset replace target device to allocation state on close
btrfs: zoned: fix ordered extent boundary calculation
btrfs: do not do preemptive flushing if the majority is global rsv
btrfs: reduce the preemptive flushing threshold to 90%
btrfs: tree-log: check btrfs_lookup_data_extent return value
btrfs: avoid unnecessarily logging directories that had no changes
btrfs: allow idmapped mount
btrfs: handle ACLs on idmapped mounts
btrfs: allow idmapped INO_LOOKUP_USER ioctl
btrfs: allow idmapped SUBVOL_SETFLAGS ioctl
btrfs: allow idmapped SET_RECEIVED_SUBVOL ioctls
btrfs: relax restrictions for SNAP_DESTROY_V2 with subvolids
btrfs: allow idmapped SNAP_DESTROY ioctls
btrfs: allow idmapped SNAP_CREATE/SUBVOL_CREATE ioctls
btrfs: check whether fsgid/fsuid are mapped during subvolume creation
btrfs: allow idmapped permission inode op
btrfs: allow idmapped setattr inode op
btrfs: allow idmapped tmpfile inode op
btrfs: allow idmapped symlink inode op
btrfs: allow idmapped mkdir inode op
...
|
||
Josef Bacik
|
5a798493b8 |
fs: add a filemap_fdatawrite_wbc helper
Btrfs sometimes needs to flush dirty pages on a bunch of dirty inodes in order to reclaim metadata reservations. Unfortunately most helpers in this area are too smart for us: 1) The normal filemap_fdata* helpers only take range and sync modes, and don't give any indication of how much was written, so we can only flush full inodes, which isn't what we want in most cases. 2) The normal writeback path requires us to have the s_umount sem held, but we can't unconditionally take it in this path because we could deadlock. 3) The normal writeback path also skips inodes with I_SYNC set if we write with WB_SYNC_NONE. This isn't the behavior we want under heavy ENOSPC pressure, we want to actually make sure the pages are under writeback before returning, and if another thread is in the middle of writing the file we may return before they're under writeback and miss our ordered extents and not properly wait for completion. 4) sync_inode() uses the normal writeback path and has the same problem as #3. What we really want is to call do_writepages() with our wbc. This way we can make sure that writeback is actually started on the pages, and we can control how many pages are written as a whole as we write many inodes using the same wbc. Accomplish this with a new helper that does just that so we can use it for our ENOSPC flushing infrastructure. Reviewed-by: Nikolay Borisov <nborisov@suse.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Josef Bacik <josef@toxicpanda.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> |
||
Jan Kara
|
7506ae6a70 |
mm: Add functions to lock invalidate_lock for two mappings
Some operations such as reflinking blocks among files will need to lock invalidate_lock for two mappings. Add helper functions to do that. Reviewed-by: Darrick J. Wong <djwong@kernel.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jan Kara <jack@suse.cz> |
||
|
Jan Kara
|
730633f0b7 |
mm: Protect operations adding pages to page cache with invalidate_lock
Currently, serializing operations such as page fault, read, or readahead against hole punching is rather difficult. The basic race scheme is like: fallocate(FALLOC_FL_PUNCH_HOLE) read / fault / .. truncate_inode_pages_range() <create pages in page cache here> <update fs block mapping and free blocks> Now the problem is in this way read / page fault / readahead can instantiate pages in page cache with potentially stale data (if blocks get quickly reused). Avoiding this race is not simple - page locks do not work because we want to make sure there are *no* pages in given range. inode->i_rwsem does not work because page fault happens under mmap_sem which ranks below inode->i_rwsem. Also using it for reads makes the performance for mixed read-write workloads suffer. So create a new rw_semaphore in the address_space - invalidate_lock - that protects adding of pages to page cache for page faults / reads / readahead. Reviewed-by: Darrick J. Wong <djwong@kernel.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jan Kara <jack@suse.cz> |
||
|
Jan Kara
|
9608703e48 |
mm: Fix comments mentioning i_mutex
inode->i_mutex has been replaced with inode->i_rwsem long ago. Fix comments still mentioning i_mutex. Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Darrick J. Wong <djwong@kernel.org> Acked-by: Hugh Dickins <hughd@google.com> Signed-off-by: Jan Kara <jack@suse.cz> |
||
|
Linus Torvalds
|
d3acb15a3a |
Merge branch 'work.iov_iter' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull iov_iter updates from Al Viro:
"iov_iter cleanups and fixes.
There are followups, but this is what had sat in -next this cycle. IMO
the macro forest in there became much thinner and easier to follow..."
* 'work.iov_iter' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (37 commits)
csum_and_copy_to_pipe_iter(): leave handling of csum_state to caller
clean up copy_mc_pipe_to_iter()
pipe_zero(): we don't need no stinkin' kmap_atomic()...
iov_iter: clean csum_and_copy_...() primitives up a bit
copy_page_from_iter(): don't need kmap_atomic() for kvec/bvec cases
copy_page_to_iter(): don't bother with kmap_atomic() for bvec/kvec cases
iterate_xarray(): only of the first iteration we might get offset != 0
pull handling of ->iov_offset into iterate_{iovec,bvec,xarray}
iov_iter: make iterator callbacks use base and len instead of iovec
iov_iter: make the amount already copied available to iterator callbacks
iov_iter: get rid of separate bvec and xarray callbacks
iov_iter: teach iterate_{bvec,xarray}() about possible short copies
iterate_bvec(): expand bvec.h macro forest, massage a bit
iov_iter: unify iterate_iovec and iterate_kvec
iov_iter: massage iterate_iovec and iterate_kvec to logics similar to iterate_bvec
iterate_and_advance(): get rid of magic in case when n is 0
csum_and_copy_to_iter(): massage into form closer to csum_and_copy_from_iter()
iov_iter: replace iov_iter_copy_from_user_atomic() with iterator-advancing variant
[xarray] iov_iter_npages(): just use DIV_ROUND_UP()
iov_iter_npages(): don't bother with iterate_all_kinds()
...
|
||
Dan Schatzberg
|
04f94e3fbe |
mm: charge active memcg when no mm is set
set_active_memcg() worked for kernel allocations but was silently ignored for user pages. This patch establishes a precedence order for who gets charged: 1. If there is a memcg associated with the page already, that memcg is charged. This happens during swapin. 2. If an explicit mm is passed, mm->memcg is charged. This happens during page faults, which can be triggered in remote VMs (eg gup). 3. Otherwise consult the current process context. If there is an active_memcg, use that. Otherwise, current->mm->memcg. Previously, if a NULL mm was passed to mem_cgroup_charge (case 3) it would always charge the root cgroup. Now it looks up the active_memcg first (falling back to charging the root cgroup if not set). Link: https://lkml.kernel.org/r/20210610173944.1203706-3-schatzberg.dan@gmail.com Signed-off-by: Dan Schatzberg <schatzberg.dan@gmail.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Acked-by: Tejun Heo <tj@kernel.org> Acked-by: Chris Down <chris@chrisdown.name> Acked-by: Jens Axboe <axboe@kernel.dk> Reviewed-by: Shakeel Butt <shakeelb@google.com> Reviewed-by: Michal Koutný <mkoutny@suse.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Ming Lei <ming.lei@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
Al Viro
|
f0b65f39ac |
iov_iter: replace iov_iter_copy_from_user_atomic() with iterator-advancing variant
Replacement is called copy_page_from_iter_atomic(); unlike the old primitive the callers do *not* need to do iov_iter_advance() after it. In case when they end up consuming less than they'd been given they need to do iov_iter_revert() on everything they had not consumed. That, however, needs to be done only on slow paths. All in-tree callers converted. And that kills the last user of iterate_all_kinds() Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> |
||
|
Al Viro
|
bc1bb416bb |
generic_perform_write()/iomap_write_actor(): saner logics for short copy
if we run into a short copy and ->write_end() refuses to advance at all, use the amount we'd managed to copy for the next iteration to handle. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> |
||
Ingo Molnar
|
f0953a1bba |
mm: fix typos in comments
Fix ~94 single-word typos in locking code comments, plus a few very obvious grammar mistakes. Link: https://lkml.kernel.org/r/20210322212624.GA1963421@gmail.com Link: https://lore.kernel.org/r/20210322205203.GB1959563@gmail.com Signed-off-by: Ingo Molnar <mingo@kernel.org> Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org> Reviewed-by: Randy Dunlap <rdunlap@infradead.org> Cc: Bhaskar Chowdhury <unixbhaskar@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |