IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
As noted in the "Deprecated Interfaces, Language Features, Attributes,
and Conventions" documentation [1], size calculations (especially
multiplication) should not be performed in memory allocator (or similar)
function arguments due to the risk of them overflowing. This could lead
to values wrapping around and a smaller allocation being made than the
caller was expecting. Using those allocations could lead to linear
overflows of heap memory and other misbehaviors.
In this case this is not actually dynamic size: all the operands
involved in the calculation are constant values. However it is better to
refactor this anyway, just to keep the open-coded math idiom out of
code.
So, use the struct_size() helper to do the arithmetic instead of the
argument "size + count * size" in the kmalloc() function.
This code was detected with the help of Coccinelle and audited and fixed
manually.
[1] https://www.kernel.org/doc/html/latest/process/deprecated.html#open-coded-arithmetic-in-allocator-arguments
Signed-off-by: Len Baker <len.baker@gmx.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
When reading the partition table on initial scan hits an I/O error the
I/O will hang with the scan_mutex held:
[<0>] do_read_cache_page+0x49b/0x790
[<0>] read_part_sector+0x39/0xe0
[<0>] read_lba+0xf9/0x1d0
[<0>] efi_partition+0xf1/0x7f0
[<0>] bdev_disk_changed+0x1ee/0x550
[<0>] blkdev_get_whole+0x81/0x90
[<0>] blkdev_get_by_dev+0x128/0x2e0
[<0>] device_add_disk+0x377/0x3c0
[<0>] nvme_mpath_set_live+0x130/0x1b0 [nvme_core]
[<0>] nvme_mpath_add_disk+0x150/0x160 [nvme_core]
[<0>] nvme_alloc_ns+0x417/0x950 [nvme_core]
[<0>] nvme_validate_or_alloc_ns+0xe9/0x1e0 [nvme_core]
[<0>] nvme_scan_work+0x168/0x310 [nvme_core]
[<0>] process_one_work+0x231/0x420
and trying to delete the controller will deadlock as it tries to grab
the scan mutex:
[<0>] nvme_mpath_clear_ctrl_paths+0x25/0x80 [nvme_core]
[<0>] nvme_remove_namespaces+0x31/0xf0 [nvme_core]
[<0>] nvme_do_delete_ctrl+0x4b/0x80 [nvme_core]
As we're now properly ordering the namespace list there is no need to
hold the scan_mutex in nvme_mpath_clear_ctrl_paths() anymore.
And we always need to kick the requeue list as the path will be marked
as unusable and I/O will be requeued _without_ a current path.
Signed-off-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
The host memory doorbell and event buffers need to be initialized on
each reset so the driver doesn't observe stale values from the previous
instantiation.
Signed-off-by: Keith Busch <kbusch@kernel.org>
Tested-by: John Levon <john.levon@nutanix.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
In case that icdoff is not zero or mandatory keyed sgls are not
supported by the NVMe/RDMA target, we'll go to error flow but we'll
return 0 to the caller. Fix it by returning an appropriate error code.
Fixes: c66e2998c8ca ("nvme-rdma: centralize controller setup sequence")
Signed-off-by: Max Gurtovoy <mgurtovoy@nvidia.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
We never checked for errors on add_disk() as this function
returned void. Now that this is fixed, use the shiny new
error handling.
Since we now can tell for sure when a disk was added, move
setting the bit NVME_NSHEAD_DISK_LIVE only when we did
add the disk successfully.
Nothing to do here as the cleanup is done elsewhere. We take
care and use test_and_set_bit() because it is protects against
two nvme paths simultaneously calling device_add_disk() on the
same namespace head.
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
This makes the code more readable.
Signed-off-by: Max Gurtovoy <mgurtovoy@nvidia.com>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
This makes the code more readable.
Signed-off-by: Max Gurtovoy <mgurtovoy@nvidia.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
With discovery controllers supporting unique subsystem NQNs the
actual subsystem NQN might be different from that one passed in
via the connect args. So add a helper to display the resulting
subsystem NQN.
Signed-off-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Add a connect option 'discovery' to specify that the connection
should be made to a discovery controller, not a normal I/O controller.
With discovery controllers supporting unique subsystem NQNs we
cannot easily distinguish by the subsystem NQN if this should be
a discovery connection, but we need this information to blank out
options not supported by discovery controllers.
Signed-off-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
With unique discovery controller NQNs we cannot distinguish the
subsystem type by the NQN alone, but need to check the subsystem
type, too.
So expose the subsystem type in a new sysfs attribute 'subsystype'.
Signed-off-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Set the correct 'CNTRLTYPE' field in the identify controller data.
Signed-off-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Add a helper function to determine if a given subsystem is a discovery
subsystem.
Signed-off-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
TPAR8013 allows for unique discovery NQNs, so make the discovery
controller NQN configurable by exposing a subsys attribute
'discovery_nqn'.
Signed-off-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Limit the maximal queue size for RDMA controllers. Today, the target
reports a limit of 1024 and this limit isn't valid for some of the RDMA
based controllers. For now, limit RDMA transport to 128 entries (the
max queue depth configured for Linux NVMe/RDMA host).
Future general solution should use RDMA/core API to calculate this size
according to device capabilities and number of WRs needed per NVMe IO
request.
Reported-by: Mark Ruijter <mruijter@primelogic.nl>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Max Gurtovoy <mgurtovoy@nvidia.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Some transports, such as RDMA, would like to set the queue size
according to device/port/ctrl characteristics. Add a new nvmet transport
op that is called during ctrl initialization. This will not effect
transports that don't implement this option.
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Max Gurtovoy <mgurtovoy@nvidia.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Corrent limit of 1024 isn't valid for some of the RDMA based ctrls. In
case the target expose a cap of larger amount of entries (e.g. 1024),
the initiator may fail to create a QP with this size. Thus limit to a
value that works for all RDMA adapters.
Future general solution should use RDMA/core API to calculate this size
according to device capabilities and number of WRs needed per NVMe IO
request.
Signed-off-by: Max Gurtovoy <mgurtovoy@nvidia.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
When removing a port, all its controllers are being removed, but there
are queues on the port that doesn't belong to any controller (during
connection time). This causes a use-after-free bug for any command
that dereferences req->port (like in nvmet_alloc_ctrl). Those queues
should be destroyed before freeing the port via configfs. Destroy
the remaining queues after the accept_work was cancelled guarantees
that no new queue will be created.
Signed-off-by: Israel Rukshin <israelr@nvidia.com>
Reviewed-by: Max Gurtovoy <mgurtovoy@nvidia.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
When removing a port, all its controllers are being removed, but there
are queues on the port that doesn't belong to any controller (during
connection time). This causes a use-after-free bug for any command
that dereferences req->port (like in nvmet_alloc_ctrl). Those queues
should be destroyed before freeing the port via configfs. Destroy the
remaining queues after the RDMA-CM was destroyed guarantees that no
new queue will be created.
Signed-off-by: Israel Rukshin <israelr@nvidia.com>
Reviewed-by: Max Gurtovoy <mgurtovoy@nvidia.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
When a port is removed through configfs, any connected controllers
are starting teardown flow asynchronously and can still send commands.
This causes a use-after-free bug for any command that dereferences
req->port (like in nvmet_parse_io_cmd).
To fix this, wait for all the teardown scheduled works to complete
(like release_work at rdma/tcp drivers). This ensures there are no
active controllers when the port is eventually removed.
Signed-off-by: Israel Rukshin <israelr@nvidia.com>
Reviewed-by: Max Gurtovoy <mgurtovoy@nvidia.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
NVMe FC don't have support for map queues, unlike the PCI, RDMA and TCP
transports. Add a ->map_queues callout for the LLDDs to provide such
functionality.
Signed-off-by: Saurav Kashyap <skashyap@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
When fast_io_fail_tmo is set I/O will be aborted while recovery is
still ongoing. This causes MD to set the namespace to failed, and
no futher I/O will be submitted to that namespace.
However, once the recovery succeeds and the namespace becomes
operational again the NVMe subsystem doesn't send a notification,
so MD cannot automatically reinstate operation and requires
manual interaction.
This patch will send a KOBJ_CHANGE uevent per multipathed namespace
once the underlying controller transitions to LIVE, allowing an automatic
MD reassembly with these udev rules:
/etc/udev/rules.d/65-md-auto-re-add.rules:
SUBSYSTEM!="block", GOTO="md_end"
ACTION!="change", GOTO="md_end"
ENV{ID_FS_TYPE}!="linux_raid_member", GOTO="md_end"
PROGRAM="/sbin/md_raid_auto_readd.sh $devnode"
LABEL="md_end"
/sbin/md_raid_auto_readd.sh:
MDADM=/sbin/mdadm
DEVNAME=$1
export $(${MDADM} --examine --export ${DEVNAME})
if [ -z "${MD_UUID}" ]; then
exit 1
fi
UUID_LINK=$(readlink /dev/disk/by-id/md-uuid-${MD_UUID})
MD_DEVNAME=${UUID_LINK##*/}
export $(${MDADM} --detail --export /dev/${MD_DEVNAME})
if [ -z "${MD_METADATA}" ] ; then
exit 1
fi
if [ $(cat /sys/block/${MD_DEVNAME}/md/degraded) != 1 ]; then
echo "${MD_DEVNAME}: array not degraded, nothing to do"
exit 0
fi
MD_STATE=$(cat /sys/block/${MD_DEVNAME}/md/array_state)
if [ ${MD_STATE} != "clean" ] ; then
echo "${MD_DEVNAME}: array state ${MD_STATE}, cannot re-add"
exit 1
fi
MD_VARNAME="MD_DEVICE_dev_${DEVNAME##*/}_ROLE"
if [ ${!MD_VARNAME} = "spare" ] ; then
${MDADM} --manage /dev/${MD_DEVNAME} --re-add ${DEVNAME}
fi
Changes to v2:
- Add udev rules example to description
Changes to v1:
- use disk_uevent() as suggested by hch
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
The nvme-loop's admin queue may be freed and reallocated, and we have to
reset the flag of NVME_CTRL_ADMIN_Q_STOPPED so that the flag can match
with the quiesce state of the admin queue.
nvme-loop is the only driver to reallocate request queue, and not see
such usage in other nvme drivers.
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20211014081710.1871747-6-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The current blk_mq_quiesce_queue() and blk_mq_unquiesce_queue() always
stops and starts the queue unconditionally. And there can be concurrent
quiesce/unquiesce coming from different unrelated code paths, so
unquiesce may come unexpectedly and start queue too early.
Prepare for supporting concurrent quiesce/unquiesce from multiple
contexts, so that we can address the above issue.
NVMe has very complicated quiesce/unquiesce use pattern, add one atomic
bit for makeiing sure that blk-mq quiece/unquiesce is always called in
pair.
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20211014081710.1871747-5-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Add two helpers so that we can prepare for pairing quiescing and
unquiescing which will be done in next patch.
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20211014081710.1871747-4-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This memset in the fast path costs a lot of cycles on my setup. Here's a
top-of-profile of doing ~6.7M IOPS:
+ 5.90% io_uring [nvme] [k] nvme_queue_rq
+ 5.32% io_uring [nvme_core] [k] nvme_setup_cmd
+ 5.17% io_uring [kernel.vmlinux] [k] io_submit_sqes
+ 4.97% io_uring [kernel.vmlinux] [k] blkdev_direct_IO
and a perf diff with this patch:
0.92% +4.40% [nvme_core] [k] nvme_setup_cmd
reducing it from 5.3% to only 0.9%. This takes it from the 2nd most
cycle consumer to something that's mostly irrelevant.
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We don't have to worry about doing extra memsets by moving it outside
the protection of RQF_DONTPREP, as nvme doesn't do partial completions.
This is in preparation for making the read/write fast path not do a full
memset of the command.
Reviewed-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Trivial to do now, just need our own io_comp_batch on the stack and pass
that in to the usual command completion handling.
I pondered making this dependent on how many entries we had to process,
but even for a single entry there's no discernable difference in
performance or latency. Running a sync workload over io_uring:
t/io_uring -b512 -d1 -s1 -c1 -p0 -F1 -B1 -n2 /dev/nvme1n1 /dev/nvme2n1
yields the below performance before the patch:
IOPS=254820, BW=124MiB/s, IOS/call=1/1, inflight=(1 1)
IOPS=251174, BW=122MiB/s, IOS/call=1/1, inflight=(1 1)
IOPS=250806, BW=122MiB/s, IOS/call=1/1, inflight=(1 1)
and the following after:
IOPS=255972, BW=124MiB/s, IOS/call=1/1, inflight=(1 1)
IOPS=251920, BW=123MiB/s, IOS/call=1/1, inflight=(1 1)
IOPS=251794, BW=122MiB/s, IOS/call=1/1, inflight=(1 1)
which definitely isn't slower, about the same if you factor in a bit of
variance. For peak performance workloads, benchmarking shows a 2%
improvement.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Take advantage of struct io_comp_batch, if passed in to the nvme poll
handler. If it's set, rather than complete each request individually
inline, store them in the io_comp_batch list. We only do so for requests
that will complete successfully, anything else will be completed inline as
before.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
struct io_comp_batch contains a list head and a completion handler, which
will allow completions to more effciently completed batches of IO.
For now, no functional changes in this patch, we just define the
io_comp_batch structure and add the argument to the file_operations iopoll
handler.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Set the poll queue flag to enable polling, given that the multipath
node just dispatches the bios to a lower queue.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Tested-by: Mark Wunderlich <mark.wunderlich@intel.com>
Link: https://lore.kernel.org/r/20211012111226.760968-17-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Replace the blk_poll interface that requires the caller to keep a queue
and cookie from the submissions with polling based on the bio.
Polling for the bio itself leads to a few advantages:
- the cookie construction can made entirely private in blk-mq.c
- the caller does not need to remember the request_queue and cookie
separately and thus sidesteps their lifetime issues
- keeping the device and the cookie inside the bio allows to trivially
support polling BIOs remapping by stacking drivers
- a lot of code to propagate the cookie back up the submission path can
be removed entirely.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Tested-by: Mark Wunderlich <mark.wunderlich@intel.com>
Link: https://lore.kernel.org/r/20211012111226.760968-15-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Unlike the RWF_HIPRI userspace ABI which is intentionally kept vague,
the bio flag is specific to the polling implementation, so rename and
document it properly.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Tested-by: Mark Wunderlich <mark.wunderlich@intel.com>
Link: https://lore.kernel.org/r/20211012111226.760968-12-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Split the integrity/metadata handling definitions out into a new header.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/20210920123328.1399408-17-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Decrease reference count of chardevice during char device deletion in
order to fix a memory leak. Add a release callabck for the device
associated chardev and move ida_simple_remove into the release function.
Fixes: 2637baed7801 ("nvme: introduce generic per-namespace chardev")
Reported-by: Yi Zhang <yi.zhang@redhat.com>
Suggested-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Adam Manzanares <a.manzanares@samsung.com>
Reviewed-by: Javier González <javier@javigon.com>
Tested-by: Yi Zhang <yi.zhang@redhat.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
The request tag is no longer the only component of the command id.
Fixes: e7006de6c2380 ("nvme: code command_id with a genctr for use-after-free validation")
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Some apple controllers use the command id as an index to implementation
specific data structures and will fail if the value is out of bounds.
The nvme driver's recently introduced command sequence number breaks
this controller.
Provide a quirk so these spec incompliant controllers can function as
before. The driver will not have the ability to detect bad completions
when this quirk is used, but we weren't previously checking this anyway.
The quirk bit was selected so that it can readily apply to stable.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=214509
Cc: Sven Peter <sven@svenpeter.dev>
Reported-by: Orlando Chamberlain <redecorating@protonmail.com>
Reported-by: Aditya Garg <gargaditya08@live.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Tested-by: Sven Peter <sven@svenpeter.dev>
Link: https://lore.kernel.org/r/20210927154306.387437-1-kbusch@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Various places in the nvme code that rely on ctrl->namespace to be
ordered. Ensure that the namespae is inserted into the list at the
right position from the start instead of sorting it after the fact.
Fixes: 540c801c65eb ("NVMe: Implement namespace list scanning")
Reported-by: Anton Eidelman <anton.eidelman@gmail.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com>
When the controller sends us multiple r2t PDUs in a single
request we need to account for it correctly as our send/recv
context run concurrently (i.e. we get a new r2t with r2t_offset
before we updated our iterator and req->data_sent marker). This
can cause wrong offsets to be sent to the controller.
To fix that, we will first know that this may happen only in
the send sequence of the last page, hence we will take
the r2t_offset to the h2c PDU data_offset, and in
nvme_tcp_try_send_data loop, we make sure to increment
the request markers also when we completed a PDU but
we are expecting more r2t PDUs as we still did not send
the entire data of the request.
Fixes: 825619b09ad3 ("nvme-tcp: fix possible use-after-completion")
Reported-by: Nowak, Lukasz <Lukasz.Nowak@Dell.com>
Tested-by: Nowak, Lukasz <Lukasz.Nowak@Dell.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Remove the freeze/unfreeze around changes to the number of hardware
queues. Study and retest has indicated there are no ios that can be
active at this point so there is nothing to freeze.
nvme-fc is draining the queues in the shutdown and error recovery path
in __nvme_fc_abort_outstanding_ios.
This patch primarily reverts 88e837ed0f1f "nvme-fc: wait for queues to
freeze before calling update_hr_hw_queues". It's not an exact revert as
it leaves the adjusting of hw queues only if the count changes.
Signed-off-by: James Smart <jsmart2021@gmail.com>
[dwagner: added explanation why no IO is pending]
Signed-off-by: Daniel Wagner <dwagner@suse.de>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
To avoid race between time out and tear down, in tear down process,
first we quiesce the queue, and then delete the timer and cancel
the time out work for the queue.
This patch merges the admin and io sync ops into the queue teardown logic
as shown in the RDMA patch 3017013dcc "nvme-rdma: avoid race between time
out and tear down". There is no teardown_lock in nvme-fc.
Signed-off-by: James Smart <jsmart2021@gmail.com>
Tested-by: Daniel Wagner <dwagner@suse.de>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Daniel Wagner <dwagner@suse.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
In case the number of hardware queues changes, we need to update the
tagset and the mapping of ctx to hctx first.
If we try to create and connect the I/O queues first, this operation
will fail (target will reject the connect call due to the wrong number
of queues) and hence we bail out of the recreate function. Then we
will to try the very same operation again, thus we don't make any
progress.
Signed-off-by: Daniel Wagner <dwagner@suse.de>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
- fix ANA state updates when a namespace is not present (Anton Eidelman)
- nvmet: fix a width vs precision bug in nvmet_subsys_attr_serial_show
(Dan Carpenter)
- avoid race in shutdown namespace removal (Daniel Wagner)
- fix io_work priority inversion in nvme-tcp (Keith Busch)
- destroy cm id before destroy qp to avoid use after free (Ruozhu Li)
-----BEGIN PGP SIGNATURE-----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=wad8
-----END PGP SIGNATURE-----
Merge tag 'nvme-5.15-2021-09-15' of git://git.infradead.org/nvme into block-5.15
Pull NVMe fixes from Christoph:
"nvme fixes for Linux 5.15
- fix ANA state updates when a namespace is not present (Anton Eidelman)
- nvmet: fix a width vs precision bug in nvmet_subsys_attr_serial_show
(Dan Carpenter)
- avoid race in shutdown namespace removal (Daniel Wagner)
- fix io_work priority inversion in nvme-tcp (Keith Busch)
- destroy cm id before destroy qp to avoid use after free (Ruozhu Li)"
* tag 'nvme-5.15-2021-09-15' of git://git.infradead.org/nvme:
nvme-tcp: fix io_work priority inversion
nvme-rdma: destroy cm id before destroy qp to avoid use after free
nvme-multipath: fix ANA state updates when a namespace is not present
nvme: avoid race in shutdown namespace removal
nvmet: fix a width vs precision bug in nvmet_subsys_attr_serial_show()
There is no need to explicitly unregister the integrity profile when
deleting the gendisk.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Link: https://lore.kernel.org/r/20210914070657.87677-4-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Dispatching requests inline with the .queue_rq() call may block while
holding the send_mutex. If the tcp io_work also happens to schedule, it
may see the req_list is non-empty, leaving "pending" true and remaining
in TASK_RUNNING. Since io_work is of higher scheduling priority, the
.queue_rq task may not get a chance to run, blocking forward progress
and leading to io timeouts.
Instead of checking for pending requests within io_work, let the queueing
restart io_work outside the send_mutex lock if there is more work to be
done.
Fixes: a0fdd1418007f ("nvme-tcp: rerun io_work if req_list is not empty")
Reported-by: Samuel Jones <sjones@kalrayinc.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
We should always destroy cm_id before destroy qp to avoid to get cma
event after qp was destroyed, which may lead to use after free.
In RDMA connection establishment error flow, don't destroy qp in cm
event handler.Just report cm_error to upper level, qp will be destroy
in nvme_rdma_alloc_queue() after destroy cm id.
Signed-off-by: Ruozhu Li <liruozhu@huawei.com>
Reviewed-by: Max Gurtovoy <mgurtovoy@nvidia.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
nvme_update_ana_state() has a deficiency that results in a failure to
properly update the ana state for a namespace in the following case:
NSIDs in ctrl->namespaces: 1, 3, 4
NSIDs in desc->nsids: 1, 2, 3, 4
Loop iteration 0:
ns index = 0, n = 0, ns->head->ns_id = 1, nsid = 1, MATCH.
Loop iteration 1:
ns index = 1, n = 1, ns->head->ns_id = 3, nsid = 2, NO MATCH.
Loop iteration 2:
ns index = 2, n = 2, ns->head->ns_id = 4, nsid = 4, MATCH.
Where the update to the ANA state of NSID 3 is missed. To fix this
increment n and retry the update with the same ns when ns->head->ns_id is
higher than nsid,
Signed-off-by: Anton Eidelman <anton@lightbitslabs.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
