IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
The Colorful X15 AT 23 ACPI video-bus device report spurious
ACPI_VIDEO_NOTIFY_CYCLE events resulting in spurious KEY_SWITCHVIDEOMODE
events being reported to userspace (and causing trouble there) when
an external screen plugged in.
Add a quirk setting the report_key_events mask to
REPORT_BRIGHTNESS_KEY_EVENTS so that the ACPI_VIDEO_NOTIFY_CYCLE
events will be ignored, while still reporting brightness up/down
hotkey-presses to userspace normally.
Signed-off-by: Yuluo Qiu <qyl27@outlook.com>
Co-developed-by: Celeste Liu <CoelacanthusHex@gmail.com>
Signed-off-by: Celeste Liu <CoelacanthusHex@gmail.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The acpi_video code was storing the acpi_video_device as driver_data
in the acpi_device children of the acpi_video_bus acpi_device.
But the acpi_video driver only binds to the bus acpi_device.
It uses, but does not bind to, the children. Since it is not
the driver it should not be using the driver_data of the children's
acpi_device-s.
Since commit 0d16710146 ("ACPI: bus: Set driver_data to NULL every
time .add() fails") the childen's driver_data ends up getting set
to NULL after a driver fails to bind to the children leading to a NULL
pointer deref in video_get_max_state when registering the cooling-dev:
[ 3.148958] BUG: kernel NULL pointer dereference, address: 0000000000000090
<snip>
[ 3.149015] Hardware name: Sony Corporation VPCSB2X9R/VAIO, BIOS R2087H4 06/15/2012
[ 3.149021] RIP: 0010:video_get_max_state+0x17/0x30 [video]
<snip>
[ 3.149105] Call Trace:
[ 3.149110] <TASK>
[ 3.149114] ? __die+0x23/0x70
[ 3.149126] ? page_fault_oops+0x171/0x4e0
[ 3.149137] ? exc_page_fault+0x7f/0x180
[ 3.149147] ? asm_exc_page_fault+0x26/0x30
[ 3.149158] ? video_get_max_state+0x17/0x30 [video 9b6f3f0d19d7b4a0e2df17a2d8b43bc19c2ed71f]
[ 3.149176] ? __pfx_video_get_max_state+0x10/0x10 [video 9b6f3f0d19d7b4a0e2df17a2d8b43bc19c2ed71f]
[ 3.149192] __thermal_cooling_device_register.part.0+0xf2/0x2f0
[ 3.149205] acpi_video_bus_register_backlight.part.0.isra.0+0x414/0x570 [video 9b6f3f0d19d7b4a0e2df17a2d8b43bc19c2ed71f]
[ 3.149227] acpi_video_register_backlight+0x57/0x80 [video 9b6f3f0d19d7b4a0e2df17a2d8b43bc19c2ed71f]
[ 3.149245] intel_acpi_video_register+0x68/0x90 [i915 1f3a758130b32ef13d301d4f8f78c7d766d57f2a]
[ 3.149669] intel_display_driver_register+0x28/0x50 [i915 1f3a758130b32ef13d301d4f8f78c7d766d57f2a]
[ 3.150064] i915_driver_probe+0x790/0xb90 [i915 1f3a758130b32ef13d301d4f8f78c7d766d57f2a]
[ 3.150402] local_pci_probe+0x45/0xa0
[ 3.150412] pci_device_probe+0xc1/0x260
<snip>
Fix this by directly using the acpi_video_device as devdata for
the cooling-device, which avoids the need to set driver-data on
the children at all.
Fixes: 0d16710146 ("ACPI: bus: Set driver_data to NULL every time .add() fails")
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/9718
Cc: 6.6+ <stable@vger.kernel.org> # 6.6+
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
If acpi_get_parent() called in acpi_video_dev_register_backlight()
fails, for example, because acpi_ut_acquire_mutex() fails inside
acpi_get_parent), this can lead to incorrect (uninitialized)
acpi_parent handle being passed to acpi_get_pci_dev() for detecting
the parent pci device.
Check acpi_get_parent() result and set parent device only in case of success.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: 9661e92c10 ("acpi: tie ACPI backlight devices to PCI devices if possible")
Signed-off-by: Nikita Kiryushin <kiryushin@ancud.ru>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Since commit 3dbc80a3e4 ("ACPI: video: Make backlight class device
registration a separate step (v2)") acpi_video# backlights are no longer
automatically registered. Instead they now only get registered when
the GPU/KMS driver calls acpi_video_register_backlight() which it only
does when it has detected an internal LCD panel.
This fixes the issue of sometimes a non-working acpi_video# backlight
showing up on Desktops / HDMI-sticks without an internal LCD display
in a more complete and robust manner then the LCD flag check which
gets enabled by the should_check_lcd_flag() helper does.
Therefor the should_check_lcd_flag() helper is no longer necessary.
The lcd_only flag itself is still necessary to only register
a single backlight device (for the right output) on the ESPRIMO Mobile
M9410 which has 2 ACPI video connector nodes with a _BCM control method,
which is the issue for which the flag was originally introduced in
commit e50b9be14a ("ACPI / video: only register backlight for LCD
device").
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Commit 89c290ea75 ("ACPI: video: Put ACPI video and its child devices
into D0 on boot") introduced calling acpi_device_fix_up_power_extended()
on the video card for which the ACPI video bus is the companion device.
This unnecessarily touches the power-state of the GPU itself, while
the issue it tries to address only requires calling _PS0 on the child
devices.
Touching the power-state of the GPU itself is causing suspend / resume
issues on e.g. a Lenovo ThinkPad W530.
Instead use acpi_device_fix_up_power_children(), which only touches
the child devices, to fix this.
Fixes: 89c290ea75 ("ACPI: video: Put ACPI video and its child devices into D0 on boot")
Reported-by: Owen T. Heisler <writer@owenh.net>
Closes: https://lore.kernel.org/regressions/9f36fb06-64c4-4264-aaeb-4e1289e764c4@owenh.net/
Closes: https://gitlab.freedesktop.org/drm/nouveau/-/issues/273
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=218124
Tested-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Tested-by: Owen T. Heisler <writer@owenh.net>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Cc: 6.6+ <stable@vger.kernel.org> # 6.6+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Add void *context arrgument to the list of arguments of
acpi_dev_install_notify_handler() and modify it to pass that argument
as context to acpi_install_notify_handler() instead of its first
argument which is problematic in general (for example, if platform
drivers used it, they would rather get struct platform_device pointers
or pointers to their private data from the context arguments of their
notify handlers).
Make all of the current callers of acpi_dev_install_notify_handler()
take this change into account so as to avoid altering the general
functionality.
Co-developed-by: Michal Wilczynski <michal.wilczynski@intel.com>
Signed-off-by: Michal Wilczynski <michal.wilczynski@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
acpi_video_bus_add_notify_handler() could free video->input and
set it to NULL on failure, but this failure would be missed in its
caller acpi_video_bus_add(). As a result, when an error happens in
acpi_dev_install_notify_handler(), acpi_video_bus_add() would call
acpi_video_bus_remove_notify_handler(), where a potential NULL pointer
video->input is dereferenced in input_unregister_device().
Fix this by adding a return value check and adjusting the following
error handling code.
Fixes: 6f70168197 ("ACPI: video: Install Notify() handler directly")
Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn>
[ rjw: Subject and changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Merge changes related to the ACPI bus type and ACPI backlight driver
changes for 6.6-rc1:
- Introduce new wrappers for ACPICA notify handler install/remove and
convert multiple drivers to using their own Notify() handlers instead
of the ACPI bus type .notify() slated for removal (Michal Wilczynski).
- Add backlight=native DMI quirk for Apple iMac12,1 and iMac12,2 (Hans
de Goede).
- Put ACPI video and its child devices explicitly into D0 on boot to
avoid platform firmware confusion (Kai-Heng Feng).
- Add backlight=native DMI quirk for Lenovo Ideapad Z470 (Jiri Slaby).
* acpi-bus:
ACPI: thermal: Install Notify() handler directly
ACPI: NFIT: Remove unnecessary .remove callback
ACPI: NFIT: Install Notify() handler directly
ACPI: HED: Install Notify() handler directly
ACPI: battery: Install Notify() handler directly
ACPI: video: Install Notify() handler directly
ACPI: AC: Install Notify() handler directly
ACPI: bus: Set driver_data to NULL every time .add() fails
ACPI: bus: Introduce wrappers for ACPICA notify handler install/remove
* acpi-video:
ACPI: video: Add backlight=native DMI quirk for Apple iMac12,1 and iMac12,2
ACPI: video: Put ACPI video and its child devices into D0 on boot
ACPI: video: Add backlight=native DMI quirk for Lenovo Ideapad Z470
Screen brightness can only be changed once on HP ZBook Fury 16 G10.
The vendor reports that the issue is related to the fact that Linux doesn't
invoke _PS0 at boot for all ACPI devices, as expected by the platform firmware:
Scope (\_SB.PC00.GFX0)
{
Scope (DD1F)
{
Method (_PS0, 0, Serialized) // _PS0: Power State 0
{
If (CondRefOf (\_SB.PC00.LPCB.EC0.SSBC))
{
\_SB.PC00.LPCB.EC0.SSBC ()
}
}
...
}
...
}
The \_SB.PC00.GFX0.DD1F is the panel device, and its _PS0 needs to be
executed at the initialization time to make the brightness control work
properly.
_PS0 is not evaluated for this device, because _PSC is missing,
which violates the ACPI specification (ACPI 6.5, section 7.3.6).
Commit b378549226 ("ACPI / PM: Do not power manage devices in unknown
initial states") tried to work around missing _PSC on platforms with
defective firmware, but got reverted due to a regression.
So the safest approach is to use acpi_device_fix_up_power_extended() to
put ACPI video and its child devices to D0 to address the issue at hand.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=217683
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
[ rjw: Subject and changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Modify the ACPI video driver to install its own Notify() handler directly
instead of providing an ACPI driver .notify() callback.
This will allow the ACPI driver .notify() callback to be eliminated and
it will allow the ideo driver to be switched over to a platform one in
the future.
Suggested-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Michal Wilczynski <michal.wilczynski@intel.com>
[ rjw: Subject and changelog edits, whitespace adjustments ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Since commit 5aa9d943e9 ("ACPI: video: Don't enable fallback path for
creating ACPI backlight by default"), the delayed registering of
acpi_video# backlight devices has been disabled by default.
The few bugreports where this option was used as a workaround were all
cases where the GPU driver did not call acpi_video_register_backlight()
and the workaround was to pass video.register_backlight_delay=1.
With the recent "ACPI: video: Make acpi_backlight=video work independent
from GPU driver" changes acpi_backlight=video can be used to achieve
the same result. So there is no need for the register_backlight_delay
option + code anymore.
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Commit 3dbc80a3e4 ("ACPI: video: Make backlight class device
registration a separate step (v2)") combined with
commit 5aa9d943e9 ("ACPI: video: Don't enable fallback path for
creating ACPI backlight by default")
Means that the video.ko code now fully depends on the GPU driver calling
acpi_video_register_backlight() for the acpi_video# backlight class
devices to get registered.
This means that if the GPU driver does not do this, acpi_backlight=video
on the cmdline, or DMI quirks for selecting acpi_video# will not work.
This is a problem on for example Apple iMac14,1 all-in-ones where
the monitor's LCD panel shows up as a regular DP connection instead of
eDP so the GPU driver will not call acpi_video_register_backlight() [1].
Fix this by making video.ko directly register the acpi_video# devices
when these have been explicitly requested either on the cmdline or
through DMI quirks (rather then auto-detection being used).
[1] GPU drivers only call acpi_video_register_backlight() when an internal
panel is detected, to avoid non working acpi_video# devices getting
registered on desktops which unfortunately is a real issue.
Fixes: 5aa9d943e9 ("ACPI: video: Don't enable fallback path for creating ACPI backlight by default")
Cc: All applicable <stable@vger.kernel.org>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The ACPI video detection code has a module parameter
`register_backlight_delay` which is currently configured to 8 seconds.
This means that if after 8 seconds of booting no native driver has created
a backlight device then the code will attempt to make an ACPI video
backlight device.
This was intended as a safety mechanism with the backlight overhaul that
occurred in kernel 6.1, but as it doesn't appear necesssary set it to be
disabled by default.
Suggested-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The current logic for the ACPI backlight detection will create
a backlight device if no native or vendor drivers have created
8 seconds after the system has booted if the ACPI tables
included backlight control methods.
If the GPU drivers have loaded, they may be able to report whether
any LCD panels were found. Allow using this information to factor
in whether to enable the fallback logic for making an acpi_video0
backlight device.
Suggested-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
For bus-based driver, device removal is implemented as:
1 device_remove()->
2 bus->remove()->
3 driver->remove()
Driver core needs no inform from callee(bus driver) about the
result of remove callback. In that case, commit fc7a6209d5
("bus: Make remove callback return void") forces bus_type::remove
be void-returned.
Now we have the situation that both 1 & 2 of calling chain are
void-returned, so it does not make much sense for 3(driver->remove)
to return non-void to its caller.
So the basic idea behind this change is making remove() callback of
any bus-based driver to be void-returned.
This change, for itself, is for device drivers based on acpi-bus.
Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Lee Jones <lee@kernel.org>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Dawei Li <set_pte_at@outlook.com>
Reviewed-by: Maximilian Luz <luzmaximilian@gmail.com> # for drivers/platform/surface/*
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Highlights:
- AMD Platform Management Framework (PMF) driver with AMT and QnQF support
- AMD PMC: Improved logging for debugging s2idle issues
- Big refactor of the ACPI/x86 backlight handling, ensuring that we only
register 1 /sys/class/backlight device per LCD panel
- Microsoft Surface:
- Surface Laptop Go 2 support
- Surface Pro 8 HID sensor support
- Asus WMI:
- Lots of cleanups
- Support for TUF RGB keyboard backlight control
- Add support for ROG X13 tablet mode
- Siemens Simatic: IPC227G and IPC427G support
- Toshiba ACPI laptop driver: Fan hwmon and battery ECO mode support
- tools/power/x86/intel-speed-select: Various improvements
- Various cleanups
- Various small bugfixes
The following is an automated git shortlog grouped by driver:
ACPI:
- video: Change disable_backlight_sysfs_if quirks to acpi_backlight=native
- s2idle: Add a new ->check() callback for platform_s2idle_ops
- video: Fix indentation of video_detect_dmi_table[] entries
- video: Drop NL5x?U, PF4NU1F and PF5?U?? acpi_backlight=native quirks
- video: Drop "Samsung X360" acpi_backlight=native quirk
- video: Remove acpi_video_set_dmi_backlight_type()
- video: Add Apple GMUX brightness control detection
- video: Add Nvidia WMI EC brightness control detection (v3)
- video: Refactor acpi_video_get_backlight_type() a bit
- video: Remove code to unregister acpi_video backlight when a native backlight registers
- video: Make backlight class device registration a separate step (v2)
- video: Simplify acpi_video_unregister_backlight()
- video: Remove acpi_video_bus from list before tearing it down
- video: Drop backlight_device_get_by_type() call from acpi_video_get_backlight_type()
- video: Add acpi_video_backlight_use_native() helper
acer-wmi:
- Move backlight DMI quirks to acpi/video_detect.c
- Acer Aspire One AOD270/Packard Bell Dot keymap fixes
apple-gmux:
- Stop calling acpi/video.h functions
asus-wmi:
- Expand support of GPU fan to read RPM and label
- Make kbd_rgb_mode_groups static
- Move acpi_backlight=native quirks to ACPI video_detect.c
- Move acpi_backlight=vendor quirks to ACPI video_detect.c
- Drop DMI chassis-type check from backlight handling
- Increase FAN_CURVE_BUF_LEN to 32
- Fix the name of the mic-mute LED classdev
- Implement TUF laptop keyboard power states
- Implement TUF laptop keyboard LED modes
- Support the GPU fan on TUF laptops
- Modify behaviour of Fn+F5 fan key
- Update tablet_mode_sw module-param help text
- Simplify tablet-mode-switch handling
- Simplify tablet-mode-switch probing
- Add support for ROG X13 tablet mode
- Adjust tablet/lidflip handling to use enum
- Support the hardware GPU MUX on some laptops
- Simplify some of the *_check_present() helpers
- Refactor panel_od attribute
- Refactor egpu_enable attribute
- Refactor disable_gpu attribute
- Document the panel_od sysfs attribute
- Document the egpu_enable sysfs attribute
- Document the dgpu_disable sysfs attribute
- Use kobj_to_dev()
- Convert all attr-show to use sysfs_emit
compal-laptop:
- Get rid of a few forward declarations
dell-privacy:
- convert to use dev_groups
dell-smbios-base:
- Use sysfs_emit()
dell-wmi:
- Add WMI event 0x0012 0x0003 to the list
docs:
- ABI: charge_control_end_threshold may not support all values
drivers/platform:
- toshiba_acpi: Call HCI_PANEL_POWER_ON on resume on some models
drm/amdgpu:
- Register ACPI video backlight when skipping amdgpu backlight registration
- Don't register backlight when another backlight should be used (v3)
drm/i915:
- Call acpi_video_register_backlight() (v3)
- Don't register backlight when another backlight should be used (v2)
drm/nouveau:
- Register ACPI video backlight when nv_backlight registration fails (v2)
- Don't register backlight when another backlight should be used (v2)
drm/radeon:
- Register ACPI video backlight when skipping radeon backlight registration
- Don't register backlight when another backlight should be used (v3)
drm/todo:
- Add entry about dealing with brightness control on devices with > 1 panel
gpio-f7188x:
- use unique labels for banks/chips
- Add GPIO support for Nuvoton NCT6116
- add a prefix to macros to keep gpio namespace clean
- switch over to using pr_fmt
hp-wmi:
- Support touchpad on/off
- Setting thermal profile fails with 0x06
int3472/discrete:
- Drop a forward declaration
intel-uncore-freq:
- Use sysfs_emit() to instead of scnprintf()
intel_cht_int33fe:
- Fix comment according to the code flow
leds:
- simatic-ipc-leds-gpio: Make simatic_ipc_led_gpio_table static
- simatic-ipc-leds-gpio: add new model 227G
move from strlcpy with unused retval to strscpy:
- move from strlcpy with unused retval to strscpy
msi-laptop:
- Change DMI match / alias strings to fix module autoloading
- Add msi_scm_disable_hw_fn_handling() helper
- Add msi_scm_model_exit() helper
- Fix resource cleanup
- Simplify ec_delay handling
- Fix old-ec check for backlight registering
- Drop MSI_DRIVER_VERSION
- Use MODULE_DEVICE_TABLE()
nvidia-wmi-ec-backlight:
- Use acpi_video_get_backlight_type()
- Move fw interface definitions to a header (v2)
p2sb:
- Fix UAF when caller uses resource name
platform/mellanox:
- mlxreg-lc: Make error handling flow consistent
- Remove redundant 'NULL' check
- Remove unnecessary code
- mlxreg-lc: Fix locking issue
- mlxreg-lc: Fix coverity warning
platform/surface:
- Split memcpy() of struct ssam_event flexible array
- aggregator_registry: Add HID devices for sensors and UCSI client to SP8
- aggregator_registry: Rename HID device nodes based on new findings
- aggregator_registry: Rename HID device nodes based on their function
- aggregator_registry: Add support for Surface Laptop Go 2
platform/x86:
- use PLATFORM_DEVID_NONE instead of -1
platform/x86/amd:
- pmc: Dump idle mask during "check" stage instead
- pmc: remove CONFIG_DEBUG_FS checks
- pmc: Fix build without debugfs
- pmc: Add sysfs files for SMU
- pmc: Add an extra STB message for checking s2idle entry
- pmc: Always write to the STB
- pmc: Add defines for STB events
platform/x86/amd/pmf:
- Remove unused power_delta instances
- install notify handler after acpi init
- Add sysfs to toggle CnQF
- Add support for CnQF
- Fix clang unused variable warning
- Fix undefined reference to platform_profile
- Force load driver on older supported platforms
- Handle AMT and CQL events for Auto mode
- Add support for Auto mode feature
- Get performance metrics from PMFW
- Add fan control support
- Add heartbeat signal support
- Add debugfs information
- Add support SPS PMF feature
- Add support for PMF APCI layer
- Add support for PMF core layer
- Add ABI doc for AMD PMF
- Add AMD PMF driver entry
platform/x86/intel/wmi:
- thunderbolt: Use dev_groups callback
pmc_atom:
- Amend comment style and grammar
- Make terminator entry uniform
- Improve quirk message to be less cryptic
- Fix SLP_TYPx bitfield mask
samsung-laptop:
- Move acpi_backlight=[vendor|native] quirks to ACPI video_detect.c
simatic-ipc:
- add new model 427G
- enable watchdog for 227G
thinkpad_acpi:
- Explicitly set to balanced mode on startup
tools/power/x86/intel-speed-select:
- Release v1.13
- Optimize CPU initialization
- Utilize cpu_map to get physical id
- Remove unused struct clos_config fields
- Enforce isst_id value
- Do not export get_physical_id
- Introduce is_cpu_in_power_domain helper
- Cleanup get_physical_id usage
- Convert more function to use isst_id
- Add pkg and die in isst_id
- Introduce struct isst_id
- Remove unused core_mask array
- Remove dead code
- Fix cpu count for TDP level display
toshiba_acpi:
- change turn_on_panel_on_resume to static
- Remove duplicate include
- Set correct parent for input device.
- Add fan RPM reading (hwmon interface)
- Add fan RPM reading (internals)
- Stop using acpi_video_set_dmi_backlight_type()
- Fix ECO LED control on Toshiba Z830
- Battery charge mode in toshiba_acpi (internals)
- Battery charge mode in toshiba_acpi (sysfs)
wmi:
- Drop forward declaration of static functions
- Allow duplicate GUIDs for drivers that use struct wmi_driver
x86-android-tablets:
- Fix broken touchscreen on Chuwi Hi8 with Windows BIOS
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEEuvA7XScYQRpenhd+kuxHeUQDJ9wFAmM9eLgUHGhkZWdvZWRl
QHJlZGhhdC5jb20ACgkQkuxHeUQDJ9zIzAf+JG058wucK0Zsnu4POzGp+uHjnWuu
AJUmTeRvCD7MidwIv5PiwEtTucQ8OuXYR+tPc8LIwCVZtc05FBmh7Y8le/CX0SS6
n9EZIvCk3Owosti5w2TPnCK920kh+Wfxl/fmfDbpi6+lpAL8r+F/mZEGKGFdZpWu
Q+yM/eyxwPH8q8gjrXOUC7rN43aYeO3OCpNG3GYkQ/2S5qrjuz39dXhNVzdSsxm7
aYOqJRNjZQEjQ3kJcp65kC6oWp3UaI1zdpGwhBG/SY8BCtCYZzlRy7gN2FCJfAa/
EyYayOvdy0zNwewbIYzck4W80hUDtfidgZgZ9crQscO/JjbGi6LhveD4YA==
=afGw
-----END PGP SIGNATURE-----
Merge tag 'platform-drivers-x86-v6.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver updates from Hans de Goede:
- AMD Platform Management Framework (PMF) driver with AMT and QnQF
support
- AMD PMC: Improved logging for debugging s2idle issues
- Big refactor of the ACPI/x86 backlight handling, ensuring that we
only register 1 /sys/class/backlight device per LCD panel
- Microsoft Surface:
- Surface Laptop Go 2 support
- Surface Pro 8 HID sensor support
- Asus WMI:
- Lots of cleanups
- Support for TUF RGB keyboard backlight control
- Add support for ROG X13 tablet mode
- Siemens Simatic: IPC227G and IPC427G support
- Toshiba ACPI laptop driver: Fan hwmon and battery ECO mode support
- tools/power/x86/intel-speed-select: Various improvements
- Various cleanups
- Various small bugfixes
* tag 'platform-drivers-x86-v6.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: (153 commits)
platform/x86: use PLATFORM_DEVID_NONE instead of -1
platform/x86/amd: pmc: Dump idle mask during "check" stage instead
platform/x86/intel/wmi: thunderbolt: Use dev_groups callback
platform/x86/amd: pmc: remove CONFIG_DEBUG_FS checks
platform/surface: Split memcpy() of struct ssam_event flexible array
platform/x86: compal-laptop: Get rid of a few forward declarations
platform/x86: intel-uncore-freq: Use sysfs_emit() to instead of scnprintf()
platform/x86: dell-smbios-base: Use sysfs_emit()
platform/x86/amd/pmf: Remove unused power_delta instances
platform/x86/amd/pmf: install notify handler after acpi init
Documentation/ABI/testing/sysfs-amd-pmf: Add ABI doc for AMD PMF
platform/x86/amd/pmf: Add sysfs to toggle CnQF
platform/x86/amd/pmf: Add support for CnQF
platform/x86/amd: pmc: Fix build without debugfs
platform/x86: hp-wmi: Support touchpad on/off
platform/x86: int3472/discrete: Drop a forward declaration
platform/x86: toshiba_acpi: change turn_on_panel_on_resume to static
platform/x86: wmi: Drop forward declaration of static functions
platform/x86: toshiba_acpi: Remove duplicate include
platform/x86: msi-laptop: Change DMI match / alias strings to fix module autoloading
...
Merge EC, AC, fan and backlight driver changes and ACPI AMBA support
update for 6.1-rc1:
- Drop unneeded result variable from ec_write() (ye xingchen).
- Remove the leftover struct acpi_ac_bl from the ACPI AC driver (Hanjun
Guo).
- Reorder symbols to get rid of a few forward declarations in the ACPI
fan driver (Uwe Kleine-König).
- Add Toshiba Satellite/Portege Z830 ACPI backlight quirk (Arvid
Norlander).
- Add ARM DMA-330 controller to the supported list in the ACPI AMBA
driver (Vijayenthiran Subramaniam).
* acpi-ec:
ACPI: EC: Drop unneeded result variable from ec_write()
* acpi-ac:
ACPI: AC: Remove the leftover struct acpi_ac_bl
* acpi-fan:
ACPI: fan: Reorder symbols to get rid of a few forward declarations
* acpi-video:
ACPI: video: Add Toshiba Satellite/Portege Z830 quirk
* acpi-amba:
ACPI: AMBA: Add ARM DMA-330 controller to the supported list
Some Toshibas have a broken acpi-video interface for brightness control
and need a special firmware call on resume to turn the panel back on.
So far these have been using the disable_backlight_sysfs_if workaround
to deal with this.
The recent x86/acpi backlight refactoring has broken this workaround:
1. This workaround relies on acpi_video_get_backlight_type() returning
acpi_video so that the acpi_video code actually runs; and
2. this relies on the actual native GPU driver to offer the sysfs
backlight interface to userspace.
After the refactor this breaks since the native driver will no
longer register its backlight-device if acpi_video_get_backlight_type()
does not return native and making it return native breaks 1.
Keeping the acpi_video backlight handling on resume active, while not
using it to set the brightness, is necessary because it does a _BCM
call on resume which is necessary to turn the panel back on on resume.
Looking at the DSDT shows that this _BCM call results in a Toshiba
HCI_SET HCI_LCD_BRIGHTNESS call, which turns the panel back on.
This kind of special vendor specific handling really belongs in
the vendor specific acpi driver. An earlier patch in this series
modifies toshiba_acpi to make the necessary HCI_SET call on resume
on affected models.
With toshiba_acpi taking care of the HCI_SET call on resume,
the acpi_video code no longer needs to call _BCM on resume.
So instead of using the (now broken) disable_backlight_sysfs_if
workaround, simply setting acpi_backlight=native to disable
the broken apci-video interface is sufficient fix things now.
After this there are no more users of the disable_backlight_sysfs_if
flag and as discussed above the flag also no longer works as intended,
so remove the disable_backlight_sysfs_if flag entirely.
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Tested-by: Arvid Norlander <lkml@vorpal.se>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Toshiba Satellite Z830 needs the quirk video_disable_backlight_sysfs_if
for proper backlight control after suspend/resume cycles.
Toshiba Portege Z830 is simply the same laptop rebranded for certain
markets (I looked through the manual to other language sections to confirm
this) and thus also needs this quirk.
Thanks to Hans de Goede for suggesting this fix.
Link: https://www.spinics.net/lists/platform-driver-x86/msg34394.html
Suggested-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Arvid Norlander <lkml@vorpal.se>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Tested-by: Arvid Norlander <lkml@vorpal.se>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
acpi_video_set_dmi_backlight_type() is troublesome because it may end
up getting called after other backlight drivers have already called
acpi_video_get_backlight_type() resulting in the other drivers
already being registered even though they should not.
In case of the acpi_video backlight, acpi_video_set_dmi_backlight_type()
actually calls acpi_video_unregister_backlight() since that is often
probed earlier, leading to userspace seeing the acpi_video0 class
device being briefly available, leading to races in userspace where
udev probe-rules try to access the device and it is already gone.
All callers have been fixed to no longer call it, so remove
acpi_video_set_dmi_backlight_type() now.
This means we now also no longer need acpi_video_unregister_backlight()
for the remove acpi_video backlight after it was wrongly registered hack,
so remove that too.
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Remove the code to unregister acpi_video backlight devices when
a native backlight device gets registered later.
Now that the acpi_video backlight device registration is a separate step
which runs later, after the drm/kms driver is done setting up its own
native backlight device, it is no longer necessary to monitor for a
native (BACKLIGHT_RAW) device showing up later and to then unregister
the acpi_video backlight device(s).
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
On x86/ACPI boards the acpi_video driver will usually initialize before
the kms driver (except i915). This causes /sys/class/backlight/acpi_video0
to show up and then the kms driver registers its own native backlight
device after which the drivers/acpi/video_detect.c code unregisters
the acpi_video0 device (when acpi_video_get_backlight_type()==native).
This means that userspace briefly sees 2 devices and the disappearing of
acpi_video0 after a brief time confuses the systemd backlight level
save/restore code, see e.g.:
https://bbs.archlinux.org/viewtopic.php?id=269920
To fix this make backlight class device registration a separate step
done by a new acpi_video_register_backlight() function. The intend is for
this to be called by the drm/kms driver *after* it is done setting up its
own native backlight device. So that acpi_video_get_backlight_type() knows
if a native backlight will be available or not at acpi_video backlight
registration time, avoiding the add + remove dance.
Note the new acpi_video_register_backlight() function is also called from
a delayed work to ensure that the acpi_video backlight devices does get
registered if necessary even if there is no drm/kms driver or when it is
disabled.
Changes in v2:
- Make register_backlight_delay a module parameter, mainly so that it can
be disabled by Nvidia binary driver users
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
When acpi_video_register() has not run yet the video_bus_head will be
empty, so there is no need to check the register_count flag first.
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Move the list_del removing an acpi_video_bus from video_bus_head
on teardown to before the teardown is done, to avoid code iterating
over the video_bus_head list seeing acpi_video_bus objects on there
which are (partly) torn down already.
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
The parent field in struct acpi_device is, in fact, redundant,
because the dev.parent field in it effectively points to the same
object and it is used by the driver core.
Accordingly, the parent field can be dropped from struct acpi_device
and for this purpose define acpi_dev_parent() to retrieve a parent
struct acpi_device pointer from the dev.parent field in struct
acpi_device. Next, update all of the users of the parent field
in struct acpi_device to use acpi_dev_parent() instead of it and
drop it.
While at it, drop the ACPI_IS_ROOT_DEVICE() macro that is only used
in one place in a confusing way.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Mark Brown <broonie@kernel.org>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Acked-by: Wei Liu <wei.liu@kernel.org>
Reviewed-by: Punit Agrawal <punit.agrawal@bytedance.com>
Merge ACPI device object management changes for v5.20-rc1.
- Use the facilities provided by the driver core and some additional
helpers to handle the children of a given ACPI device object in
multiple places instead of using the children and node list heads in
struct acpi_device which is error prone (Rafael Wysocki).
- Fix ACPI-related device reference counting issue in the hisi_lpc bus
driver (Yang Yingliang).
- Drop the children and node list heads that are not needed any more
from struct acpi_device (Rafael Wysocki).
- Drop driver member from struct acpi_device (Uwe Kleine-König).
- Drop redundant check from acpi_device_remove() (Uwe Kleine-König).
* acpi-bus:
ACPI: bus: Drop unused list heads from struct acpi_device
hisi_lpc: Use acpi_dev_for_each_child()
bus: hisi_lpc: fix missing platform_device_put() in hisi_lpc_acpi_probe()
ACPI: bus: Drop driver member of struct acpi_device
ACPI: bus: Drop redundant check in acpi_device_remove()
mfd: core: Use acpi_dev_for_each_child()
ACPI / MMC: PM: Unify fixing up device power
soundwire: Use acpi_dev_for_each_child()
platform/x86/thinkpad_acpi: Use acpi_dev_for_each_child()
ACPI: scan: Walk ACPI device's children using driver core
ACPI: bus: Introduce acpi_dev_for_each_child_reverse()
ACPI: video: Use acpi_dev_for_each_child()
ACPI: bus: Export acpi_dev_for_each_child() to modules
ACPI: property: Use acpi_dev_for_each_child() for child lookup
ACPI: container: Use acpi_dev_for_each_child()
USB: ACPI: Replace usb_acpi_find_port() with acpi_find_child_by_adr()
thunderbolt: ACPI: Replace tb_acpi_find_port() with acpi_find_child_by_adr()
ACPI: glue: Introduce acpi_find_child_by_adr()
ACPI: glue: Introduce acpi_dev_has_children()
ACPI: glue: Use acpi_dev_for_each_child()
Commit 3a0cf7ab8d ("ACPI: video: Change how we determine if brightness
key-presses are handled") made acpi_video_handles_brightness_key_presses()
report false when none of the ACPI Video Devices support backlight control.
But it turns out that at least on a Dell Inspiron N4010 there is no ACPI
backlight control, yet brightness hotkeys are still reported through
the ACPI Video Bus; and since acpi_video_handles_brightness_key_presses()
now returns false, brightness keypresses are now reported twice.
To fix this rename the has_backlight flag to may_report_brightness_keys and
also set it the first time a brightness key press event is received.
Depending on the delivery of the other ACPI (WMI) event vs the ACPI Video
Bus event this means that the first brightness key press might still get
reported twice, but all further keypresses will be filtered as before.
Note that this relies on other drivers reporting brightness key events
calling acpi_video_handles_brightness_key_presses() when delivering
the events (rather then once during driver probe). This is already
required and documented in include/acpi/video.h:
/*
* Note: The value returned by acpi_video_handles_brightness_key_presses()
* may change over time and should not be cached.
*/
Fixes: 3a0cf7ab8d ("ACPI: video: Change how we determine if brightness key-presses are handled")
Link: https://lore.kernel.org/regressions/CALF=6jEe5G8+r1Wo0vvz4GjNQQhdkLT5p8uCHn6ZXhg4nsOWow@mail.gmail.com/
Reported-and-tested-by: Ben Greening <bgreening@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://lore.kernel.org/r/20220713211101.85547-2-hdegoede@redhat.com
Some systems have an ACPI video bus but not ACPI video devices with
backlight capability. On these devices brightness key-presses are
(logically) not reported through the ACPI video bus.
Change how acpi_video_handles_brightness_key_presses() determines if
brightness key-presses are handled by the ACPI video driver to avoid
vendor specific drivers/platform/x86 drivers filtering out their
brightness key-presses even though they are the only ones reporting
these presses.
Fixes: ed83c91718 ("platform/x86: panasonic-laptop: Resolve hotkey double trigger bug")
Reported-and-tested-by: Stefan Seyfried <seife+kernel@b1-systems.com>
Reported-and-tested-by: Kenneth Chan <kenneth.t.chan@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20220624112340.10130-2-hdegoede@redhat.com
Instead of walking the list of children of an ACPI device directly,
use acpi_dev_for_each_child() to carry out an action for all of
the given ACPI device's children.
This will help to eliminate the children list head from struct
acpi_device as it is redundant and it is used in questionable ways
in some places (in particular, locking is needed for walking the
list pointed to it safely, but it is often missing).
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
PM notifier callbacks should check for supported events rather than filter
out the unsupported events. So that it won't break when a new event is
introduced.
No functional change in this patch.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Modify the ACPI code to use acpi_fetch_acpi_dev() instead of
acpi_bus_get_device() where applicable.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
The Dell Vostro 3350 ACPI video-bus device reports spurious
ACPI_VIDEO_NOTIFY_CYCLE events resulting in spurious KEY_SWITCHVIDEOMODE
events being reported to userspace (and causing trouble there).
Add a quirk setting the report_key_events mask to
REPORT_BRIGHTNESS_KEY_EVENTS so that the ACPI_VIDEO_NOTIFY_CYCLE
events will be ignored, while still reporting brightness up/down
hotkey-presses to userspace normally.
BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1911763
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
* acpi-misc:
ACPI: dock: fix some coding style issues
ACPI: sysfs: fix some coding style issues
ACPI: PM: add a missed blank line after declarations
ACPI: custom_method: fix a coding style issue
ACPI: CPPC: fix some coding style issues
ACPI: button: fix some coding style issues
ACPI: battery: fix some coding style issues
ACPI: acpi_pad: add a missed blank line after declarations
ACPI: LPSS: add a missed blank line after declarations
ACPI: ipmi: remove useless return statement for void function
ACPI: processor: fix some coding style issues
ACPI: APD: fix a block comment align issue
ACPI: AC: fix some coding style issues
ACPI: fix various typos in comments
Starting with Windows 8, Windows no longer uses the ACPI-video interface
for backlight control by default. Instead backlight control is left up
to the GPU drivers and these are typically directly accessing the GPU
for this instead of going through ACPI.
This means that the ACPI video interface is no longer being tested by
many vendors, which leads to false-positive /sys/class/backlight entries
on devices which don't have a backlight at all such as desktops or
top-set boxes. These false-positives causes desktop environments to show
a non functional brightness slider in various places.
Checking the LCD flag greatly reduces the amount of false-positives,
so commit 5928c28152 ("ACPI / video: Default lcd_only to true on
Win8-ready and newer machines") enabled the checking of this flag
by default on all win8 BIOS-es. But this let to regressions on some
models, so the check was made stricter adding a DMI chassis-type check
to only enable the LCD flag checking on desktop/server chassis.
Unfortunately the chassis-type reported in the DMI strings is not always
reliable. One class of devices where this is a problem is Intel Bay Trail-T
based top-set boxes / mini PCs / HDMI sticks. These are based on reference
designs which were targetets and the reference design BIOS code
is often used without changing the chassis-type to something more
appropriate.
There are many, many Bay Trail-T based devices affected by this, so DMI
quirking our way out of this is a bad idea. This patch takes a different
approach, Bay Trail-T (unlike regular Bay Trail) is an ACPI-reduced-hw
platform and ACPI-reduced-hw platforms generally don't have
an embedded-controller and thus will use a native (GPU specific) backlight
interface. This patch enables Checking the LCD flag by default on
ACPI-reduced-hw platforms with a win8 BIOS independent of the reported
chassis-type, fixing the false positive /sys/class/backlight entries
on these devices.
Note in hindsight I should have never added the DMI chassis-type check
when the enabling of LCD flag checking on Windows 8 BIOS-es let to some
regressions. Instead I should have added DMI quirks for the (presumably
few) models where the LCD flag check let to issues. But I'm afraid that
it is too late to change this now, changing this now will likely lead to
a bunch of regressions.
This patch was tested on a Mele PCG03 mini PC.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Replace the ACPI_DEBUG_PRINT() instances in acpi_video.c with
acpi_handle_debug() calls and the ACPI_EXCEPTION()/ACPI_ERROR()/
ACPI_WARNING() instances in there with acpi_handle_info() calls,
which among other things causes the excessive log levels of those
messages to be increased.
Drop the _COMPONENT and ACPI_MODULE_NAME() definitions that are not
used any more from acpi_video.c, drop the no longer needed
ACPI_VIDEO_COMPONENT definition from the headers and update the
documentation accordingly.
While at it, add a pr_fmt() definition to acpi_video.c, replace the
direct printk() invocations in there with acpi_handle_info() or
pr_info() (and reduce the excessive log level where applicable) and
drop the PREFIX sybmbol definition which is not necessary any more
from acpi_video.c.
Also make unrelated janitorial changes to fix up white space and
use ACPI_FAILURE() instead of negating ACPI_SUCCESS().
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Hanjun Guo <guohanjun@huawei.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Replaces spaces with tabs where spaces have been (inconsistently) used
for indentation and removes trailing whitespaces.
Signed-off-by: Maximilian Luz <luzmaximilian@gmail.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The variable result is being initialized with a value that is never
read and it is being updated later with a new value. The initialization
is redundant and can be removed.
Addresses-Coverity: ("Unused value")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Commit efaa14c:
"Starting from win8, MS backlight control driver will set bit 2 of the
parameter of control method _DOS, to inform firmware it should not
perform any automatic brightness changes. This mostly affects hotkey
notification deliver - if we do not set this bit, on hotkey press,
firmware may choose to adjust brightness level instead of sending out
notification and doing nothing."
win7:
https://download.microsoft.com/download/9/c/5/9c5b2167-8017-4bae-9fde-d599bac8184a/BrightnessCtrl.docx
"To avoid problems that might occur if both the system firmware and
the monitor driver control the brightness of the display, the display
miniport driver should set bit 2 of the argument to the _DOS method.
Setting this bit notifies the system firmware that it should not
perform any automatic display brightness changes. The WDDM
driver must set this particular bit because it controls the _DOS
method. The other bits in the _DOS method control the behavior of
the firmware in response to the display switch hot keys."
win8:
http://read.pudn.com/downloads193/doc/907411/Brightness.doc
Signed-off-by: Kacper Piwiński <cosiekvfj@o2.pl>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Some machines change the brightness themselves when a brightness hotkey
gets pressed, despite us telling them not to. This causes the brightness to
go two steps up / down when the hotkey is pressed. This is esp. a problem
on older machines with only a few brightness levels.
This commit adds a new hw_changes_brightness quirk which makes
acpi_video_device_notify() only call backlight_force_update(...,
BACKLIGHT_UPDATE_HOTKEY) and not do anything else, notifying userspace
that the brightness was changed and leaving it at that fixing the dual
step problem.
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=204077
Reported-by: Kacper Piwiński <cosiekvfj@o2.pl>
Tested-by: Kacper Piwiński <cosiekvfj@o2.pl>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Based on 3 normalized pattern(s):
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license as published by
the free software foundation either version 2 of the license or at
your option any later version this program is distributed in the
hope that it will be useful but without any warranty without even
the implied warranty of merchantability or fitness for a particular
purpose see the gnu general public license for more details
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license as published by
the free software foundation either version 2 of the license or at
your option any later version [author] [kishon] [vijay] [abraham]
[i] [kishon]@[ti] [com] this program is distributed in the hope that
it will be useful but without any warranty without even the implied
warranty of merchantability or fitness for a particular purpose see
the gnu general public license for more details
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license as published by
the free software foundation either version 2 of the license or at
your option any later version [author] [graeme] [gregory]
[gg]@[slimlogic] [co] [uk] [author] [kishon] [vijay] [abraham] [i]
[kishon]@[ti] [com] [based] [on] [twl6030]_[usb] [c] [author] [hema]
[hk] [hemahk]@[ti] [com] this program is distributed in the hope
that it will be useful but without any warranty without even the
implied warranty of merchantability or fitness for a particular
purpose see the gnu general public license for more details
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-or-later
has been chosen to replace the boilerplate/reference in 1105 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Allison Randal <allison@lohutok.net>
Reviewed-by: Richard Fontana <rfontana@redhat.com>
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190527070033.202006027@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Commit 53fa1f6e8a ("ACPI / video: Only default only_lcd to true on
Win8-ready _desktops_") introduced chassis type detection, limiting the
lcd_only check for the backlight to devices where the chassis-type
indicates their is no builtin LCD panel.
The purpose of the lcd_only check is to avoid advertising a backlight
interface on desktops, since skylake and newer machines seem to always
have a backlight interface even if there is no LCD panel. The limiting
of this check to desktops only was done to avoid breaking backlight
support on some laptops which do not have the lcd flag set.
The Fujitsu ESPRIMO Q910 which is a compact (NUC like) desktop machine
has a chassis type of 0x10 aka "Lunch Box". Without the lcd_only check
we end up falsely advertising backlight/brightness control on this
device. This commit extend the dmi_is_desktop check to return true
for type 0x10 to fix this.
Fixes: 53fa1f6e8a ("ACPI / video: Only default only_lcd to true ...")
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
This commit refactors the chassis-type detection introduced by
commit 53fa1f6e8a ("ACPI / video: Only default only_lcd to true on
Win8-ready _desktops_") (where desktop means anything without a builtin
screen).
The DMI chassis_type is an unsigned integer, so rather then doing a
whole bunch of string-compares on it, convert it to an int and feed
the result to a switch case.
Note the switch case uses hex values, this is done because the spec
uses hex values too. This changes the check for "Main Server Chassis"
from checking for 11 decimal to 11 hexadecimal, this is a bug fix,
the original check for 11 decimal was wrong.
Fixes: 53fa1f6e8a ("ACPI / video: Only default only_lcd to true ...")
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
[ rjw: Drop redundant return statements ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Commit 5928c28152 (ACPI / video: Default lcd_only to true on Win8-ready
and newer machines) made only_lcd default to true on all machines where
acpi_osi_is_win8() returns true, including laptops.
The purpose of this is to avoid the bogus / non-working acpi backlight
interface which many newer BIOS-es define on desktop machines.
But this is causing a regression on some laptops, specifically on the
Dell XPS 13 2013 model, which does not have the LCD flag set for its
fully functional ACPI backlight interface.
Rather then DMI quirking our way out of this, this commits changes the
logic for setting only_lcd to true, to only do this on machines with
a desktop (or server) dmi chassis-type.
Note that we cannot simply only check the chassis-type and not register
the backlight interface based on that as there are some laptops and
tablets which have their chassis-type set to "3" aka desktop. Hopefully
the combination of checking the LCD flag, but only on devices with
a desktop(ish) chassis-type will avoid the needs for DMI quirks for this,
or at least limit the amount of DMI quirks which we need to a minimum.
Fixes: 5928c28152 (ACPI / video: Default lcd_only to true on Win8-ready and newer machines)
Reported-and-tested-by: James Hogan <jhogan@kernel.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Cc: 4.15+ <stable@vger.kernel.org> # 4.15+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Assign true or false to boolean variables instead of an integer value.
This issue was detected with the help of Coccinelle.
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
We're seeing a lot of bogus backlight interfaces on newer machines without
a LCD such as desktops, servers and HDMI sticks. This causes userspace to
show a non-functional brightness slider in e.g. the GNOME3 system menu,
which is undesirable. And, in general, we should simply just not register
a non functional backlight interface.
Checking the LCD flag causes the bogus acpi_video backlight interfaces to
go away (on the machines this was tested on).
This change sets the lcd_only option by default on any machines which
are Win8-ready, to fix this.
This is not entirely without a risk of regressions, but video_detect.c
already prefers native-backlight interfaces over the acpi_video one
on Win8-ready machines, calling acpi_video_unregister_backlight() as soon
as a native interface shows up. This is done because the ACPI backlight
interface often is broken on Win8-ready machines, because win8 does not
seem to actually use it.
So in practice we already end up not registering the ACPI backlight
interface on (most) Win8-ready machines with a LCD panel, thus this
change does not change anything for (most) machines with a LCD panel
and on machines without a LCD panel we actually don't want to register
any backlight interfaces.
This has been tested on the following machines and fixes a bogus backlight
interface showing up there:
- Desktop with an Asrock B150M Pro4S/D3 m.b. using i5-6500 builtin gfx
- Intel Compute Stick STK1AW32SC
- Meegopad T08 HDMI stick
Bogus backlight interfaces have also been reported on:
- Desktop with Asus H87I-Plus m.b.
- Desktop with ASRock B75M-ITX m.b.
- Desktop with Gigabyte Z87-D3HP m.b.
- Dell PowerEdge T20 desktop
Link: https://bugzilla.redhat.com/show_bug.cgi?id=1097436
Link: https://bugzilla.redhat.com/show_bug.cgi?id=1133327
Link: https://bugzilla.redhat.com/show_bug.cgi?id=1133329
Link: https://bugzilla.redhat.com/show_bug.cgi?id=1133646
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
