IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
[ Upstream commit 91f9f4a37124044089debb02a3965c59b5b10c21 ]
In the process of adding support for shared IRQ pins, a scenario
was accidentally created where adv7511_irq_process returned
prematurely causing the EDID to fail randomly.
Since the interrupt handler is broken up into two main helper functions,
update both of them to treat the helper functions as IRQ handlers. These
IRQ routines process their respective tasks as before, but if they
determine that actual work was done, mark the respective IRQ status
accordingly, and delay the check until everything has been processed.
This should guarantee the helper functions don't return prematurely
while still returning proper values of either IRQ_HANDLED or IRQ_NONE.
Reported-by: Liu Ying <victor.liu@nxp.com>
Fixes: f3d9683346d6 ("drm/bridge: adv7511: Allow IRQ to share GPIO pins")
Signed-off-by: Adam Ford <aford173@gmail.com>
Tested-by: Liu Ying <victor.liu@nxp.com> # i.MX8MP EVK ADV7535 EDID retrieval w/o IRQ
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240630221931.1650565-1-aford173@gmail.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
V3: Remove unnecessary declaration of ret by evaluating the return
code of regmap_read directly.
V2: Fix uninitialized cec_status
Cut back a little on error handling to return either IRQ_NONE or
IRQ_HANDLED.
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7346e7a058a2c9aa9ff1cc699c7bf18a402d9f84 ]
When the state changes from enabled to disabled, polarity, duty_cycle
and period are not configured in hardware and TIM_CCER_CCxE is just
cleared. However if the state changes from one disabled state to
another, all parameters are written to hardware because the early exit
from stm32_pwm_apply() is only taken if the pwm is currently enabled.
This yields surprises like: Applying
{ .period = 1, .duty_cycle = 0, .enabled = false }
succeeds if the pwm is initially on, but fails if it's already off
because 1 is a too small period.
Update the check for lazy disable to always exit early if the target
state is disabled, no matter what is currently configured.
Fixes: 7edf7369205b ("pwm: Add driver for STM32 plaftorm")
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Link: https://lore.kernel.org/r/20240703110010.672654-2-u.kleine-koenig@baylibre.com
Signed-off-by: Uwe Kleine-König <ukleinek@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 99bf7c2eccff82760fa23ce967cc67c8c219c6a6 ]
LTC2991_T_INT_CH_NR is 4. The st->temp_en[] array has LTC2991_MAX_CHANNEL
(4) elements. Thus if "channel" is equal to LTC2991_T_INT_CH_NR then we
have read one element beyond the end of the array. Flip the conditions
around so that we check if "channel" is valid before using it as an array
index.
Fixes: 2b9ea4262ae9 ("hwmon: Add driver for ltc2991")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://lore.kernel.org/r/Zoa9Y_UMY4_ROfhF@stanley.mountain
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 25b3a8237a03ec0b67b965b52d74862e77ef7115 ]
When handling an IO request, MD checks if a reshape is currently
happening, and if so, where the IO sector is in relation to the reshape
progress. MD uses conf->reshape_progress for both of these tasks. When
the reshape finishes, conf->reshape_progress is set to MaxSector. If
this occurs after MD checks if the reshape is currently happening but
before it calls ahead_of_reshape(), then ahead_of_reshape() will end up
comparing the IO sector against MaxSector. During a backwards reshape,
this will make MD think the IO sector is in the area not yet reshaped,
causing it to use the previous configuration, and map the IO to the
sector where that data was before the reshape.
This bug can be triggered by running the lvm2
lvconvert-raid-reshape-linear_to_raid6-single-type.sh test in a loop,
although it's very hard to reproduce.
Fix this by factoring the code that checks where the IO sector is in
relation to the reshape out to a helper called get_reshape_loc(),
which reads reshape_progress and reshape_safe while holding the
device_lock, and then rechecks if the reshape has finished before
calling ahead_of_reshape with the saved values.
Also use the helper during the REQ_NOWAIT check to see if the location
is inside of the reshape region.
Fixes: fef9c61fdfabf ("md/raid5: change reshape-progress measurement to cope with reshaping backwards.")
Signed-off-by: Benjamin Marzinski <bmarzins@redhat.com>
Signed-off-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20240702151802.1632010-1-bmarzins@redhat.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a1fd37f97808db4fa1bf55da0275790c42521e45 ]
Commit 90f5f7ad4f38 ("md: Wait for md_check_recovery before attempting
device removal.") explained in the commit message that failed device
must be reomoved from the personality first by md_check_recovery(),
before it can be removed from the array. That's the reason the commit
add the code to wait for MD_RECOVERY_NEEDED.
However, this is not the case now, because remove_and_add_spares() is
called directly from hot_remove_disk() from ioctl path, hence failed
device(marked faulty) can be removed from the personality by ioctl.
On the other hand, the commit introduced a performance problem that
if MD_RECOVERY_NEEDED is set and the array is not running, ioctl will
wait for 5s before it can return failure to user.
Since the waiting is not needed now, fix the problem by removing the
waiting.
Fixes: 90f5f7ad4f38 ("md: Wait for md_check_recovery before attempting device removal.")
Reported-by: Mateusz Kusiak <mateusz.kusiak@linux.intel.com>
Closes: https://lore.kernel.org/all/814ff6ee-47a2-4ba0-963e-cf256ee4ecfa@linux.intel.com/
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20240627112321.3044744-1-yukuai1@huaweicloud.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 81e15ca3e523a508d62806fe681c1d289361ca16 ]
If the user has requested a counting threshold for the CPU cycles event,
then the fixed cycle counter can't be assigned as it lacks threshold
support. Currently, the thresholds will work or not randomly depending
on which counter the event is assigned.
While using thresholds for CPU cycles doesn't make much sense, it can be
useful for testing purposes.
Fixes: 816c26754447 ("arm64: perf: Add support for event counting threshold")
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/r/20240626-arm-pmu-3-9-icntr-v2-1-c9784b4f4065@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 98d34c087249d39838874b83e17671e7d5eb1ca7 ]
Ensure that info->sector_size and info->physical_sector_size are set
before the call to blkif_set_queue_limits by doing away with the
local variables and arguments that propagate them.
Thanks to Marek Marczykowski-Górecki and Jürgen Groß for root causing
the issue.
Fixes: ba3f67c11638 ("xen-blkfront: atomically update queue limits")
Reported-by: Rusty Bird <rustybird@net-c.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Roger Pau Monné <roger.pau@citrix.com>
Link: https://lore.kernel.org/r/20240625055238.7934-1-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 39823b47bbd40502632ffba90ebb34fff7c8b5e8 ]
The current tag reservation code is based on a misunderstanding of the
meaning of data->shallow_depth. Fix the tag reservation code as follows:
* By default, do not reserve any tags for synchronous requests because
for certain use cases reserving tags reduces performance. See also
Harshit Mogalapalli, [bug-report] Performance regression with fio
sequential-write on a multipath setup, 2024-03-07
(https://lore.kernel.org/linux-block/5ce2ae5d-61e2-4ede-ad55-551112602401@oracle.com/)
* Reduce min_shallow_depth to one because min_shallow_depth must be less
than or equal any shallow_depth value.
* Scale dd->async_depth from the range [1, nr_requests] to [1,
bits_per_sbitmap_word].
Cc: Christoph Hellwig <hch@lst.de>
Cc: Damien Le Moal <dlemoal@kernel.org>
Cc: Zhiguo Niu <zhiguo.niu@unisoc.com>
Fixes: 07757588e507 ("block/mq-deadline: Reserve 25% of scheduler tags for synchronous requests")
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20240509170149.7639-3-bvanassche@acm.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6259151c04d4e0085e00d2dcb471ebdd1778e72e ]
Call .limit_depth() after data->hctx has been set such that data->hctx can
be used in .limit_depth() implementations.
Cc: Christoph Hellwig <hch@lst.de>
Cc: Damien Le Moal <dlemoal@kernel.org>
Cc: Zhiguo Niu <zhiguo.niu@unisoc.com>
Fixes: 07757588e507 ("block/mq-deadline: Reserve 25% of scheduler tags for synchronous requests")
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Tested-by: Zhiguo Niu <zhiguo.niu@unisoc.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20240509170149.7639-2-bvanassche@acm.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 39b24cced70fdc336dbc0070f8b3bde61d8513a8 ]
According to the comments on fan is disabled, we change to manual mode
and set the duty cycle to 0.
For setting the duty cycle part, the register is wrong. Fix it.
Fixes: 1c301fc5394f ("hwmon: Add a driver for the ADT7475 hardware monitoring chip")
Signed-off-by: Wayne Tung <chineweff@gmail.com>
Link: https://lore.kernel.org/r/20240701073252.317397-1-chineweff@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1be59c97c83ccd67a519d8a49486b3a8a73ca28a ]
An UAF can happen when /proc/cpuset is read as reported in [1].
This can be reproduced by the following methods:
1.add an mdelay(1000) before acquiring the cgroup_lock In the
cgroup_path_ns function.
2.$cat /proc/<pid>/cpuset repeatly.
3.$mount -t cgroup -o cpuset cpuset /sys/fs/cgroup/cpuset/
$umount /sys/fs/cgroup/cpuset/ repeatly.
The race that cause this bug can be shown as below:
(umount) | (cat /proc/<pid>/cpuset)
css_release | proc_cpuset_show
css_release_work_fn | css = task_get_css(tsk, cpuset_cgrp_id);
css_free_rwork_fn | cgroup_path_ns(css->cgroup, ...);
cgroup_destroy_root | mutex_lock(&cgroup_mutex);
rebind_subsystems |
cgroup_free_root |
| // cgrp was freed, UAF
| cgroup_path_ns_locked(cgrp,..);
When the cpuset is initialized, the root node top_cpuset.css.cgrp
will point to &cgrp_dfl_root.cgrp. In cgroup v1, the mount operation will
allocate cgroup_root, and top_cpuset.css.cgrp will point to the allocated
&cgroup_root.cgrp. When the umount operation is executed,
top_cpuset.css.cgrp will be rebound to &cgrp_dfl_root.cgrp.
The problem is that when rebinding to cgrp_dfl_root, there are cases
where the cgroup_root allocated by setting up the root for cgroup v1
is cached. This could lead to a Use-After-Free (UAF) if it is
subsequently freed. The descendant cgroups of cgroup v1 can only be
freed after the css is released. However, the css of the root will never
be released, yet the cgroup_root should be freed when it is unmounted.
This means that obtaining a reference to the css of the root does
not guarantee that css.cgrp->root will not be freed.
Fix this problem by using rcu_read_lock in proc_cpuset_show().
As cgroup_root is kfree_rcu after commit d23b5c577715
("cgroup: Make operations on the cgroup root_list RCU safe"),
css->cgroup won't be freed during the critical section.
To call cgroup_path_ns_locked, css_set_lock is needed, so it is safe to
replace task_get_css with task_css.
[1] https://syzkaller.appspot.com/bug?extid=9b1ff7be974a403aa4cd
Fixes: a79a908fd2b0 ("cgroup: introduce cgroup namespaces")
Signed-off-by: Chen Ridong <chenridong@huawei.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9142be9e6443fd641ca37f820efe00d9cd890eb1 ]
The direct-call syscall dispatch function doesn't know that the exit()
and exit_group() syscall handlers don't return, so the call sites aren't
optimized accordingly.
Fix that by marking the exit syscall declarations __noreturn.
Fixes the following warnings:
vmlinux.o: warning: objtool: x64_sys_call+0x2804: __x64_sys_exit() is missing a __noreturn annotation
vmlinux.o: warning: objtool: ia32_sys_call+0x29b6: __ia32_sys_exit_group() is missing a __noreturn annotation
Fixes: 1e3ad78334a6 ("x86/syscall: Don't force use of indirect calls for system calls")
Closes: https://lkml.kernel.org/lkml/6dba9b32-db2c-4e6d-9500-7a08852f17a3@paulmck-laptop
Reported-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Tested-by: Paul E. McKenney <paulmck@kernel.org>
Link: https://lore.kernel.org/r/5d8882bc077d8eadcc7fd1740b56dfb781f12288.1719381528.git.jpoimboe@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7821fa101eab529521aa4b724bf708149d70820c ]
iosf_mbi_pci_{read,write}_mdr() use pci_{read,write}_config_dword()
that return PCIBIOS_* codes but functions also return -ENODEV which are
not compatible error codes. As neither of the functions are related to
PCI read/write functions, they should return normal errnos.
Convert PCIBIOS_* returns code using pcibios_err_to_errno() into normal
errno before returning it.
Fixes: 46184415368a ("arch: x86: New MailBox support driver for Intel SOC's")
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20240527125538.13620-4-ilpo.jarvinen@linux.intel.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e9d7b435dfaec58432f4106aaa632bf39f52ce9f ]
xen_pcifront_enable_irq() uses pci_read_config_byte() that returns
PCIBIOS_* codes. The error handling, however, assumes the codes are
normal errnos because it checks for < 0.
xen_pcifront_enable_irq() also returns the PCIBIOS_* code back to the
caller but the function is used as the (*pcibios_enable_irq) function
which should return normal errnos.
Convert the error check to plain non-zero check which works for
PCIBIOS_* return codes and convert the PCIBIOS_* return code using
pcibios_err_to_errno() into normal errno before returning it.
Fixes: 3f2a230caf21 ("xen: handled remapped IRQs when enabling a pcifront PCI device.")
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Juergen Gross <jgross@suse.com>
Link: https://lore.kernel.org/r/20240527125538.13620-3-ilpo.jarvinen@linux.intel.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 724852059e97c48557151b3aa4af424614819752 ]
intel_mid_pci_irq_enable() uses pci_read_config_byte() that returns
PCIBIOS_* codes. The error handling, however, assumes the codes are
normal errnos because it checks for < 0.
intel_mid_pci_irq_enable() also returns the PCIBIOS_* code back to the
caller but the function is used as the (*pcibios_enable_irq) function
which should return normal errnos.
Convert the error check to plain non-zero check which works for
PCIBIOS_* return codes and convert the PCIBIOS_* return code using
pcibios_err_to_errno() into normal errno before returning it.
Fixes: 5b395e2be6c4 ("x86/platform/intel-mid: Make IRQ allocation a bit more flexible")
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20240527125538.13620-2-ilpo.jarvinen@linux.intel.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ec0b4c4d45cf7cf9a6c9626a494a89cb1ae7c645 ]
x86_of_pci_irq_enable() returns PCIBIOS_* code received from
pci_read_config_byte() directly and also -EINVAL which are not
compatible error types. x86_of_pci_irq_enable() is used as
(*pcibios_enable_irq) function which should not return PCIBIOS_* codes.
Convert the PCIBIOS_* return code from pci_read_config_byte() into
normal errno using pcibios_err_to_errno().
Fixes: 96e0a0797eba ("x86: dtb: Add support for PCI devices backed by dtb nodes")
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20240527125538.13620-1-ilpo.jarvinen@linux.intel.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 469169803d52a5d8f0dc781090638e851a7d22b1 ]
Some instructions are only available on the 64-bit architecture.
Bi-arch compilers that default to -m32 need the explicit -m64 option
to evaluate them properly.
Fixes: 18e66b695e78 ("x86/shstk: Add Kconfig option for shadow stack")
Closes: https://lore.kernel.org/all/20240612-as-instr-opt-wrussq-v2-1-bd950f7eead7@gmail.com/
Reported-by: Dmitry Safonov <0x7f454c46@gmail.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Tested-by: Dmitry Safonov <0x7f454c46@gmail.com>
Link: https://lore.kernel.org/r/20240612050257.3670768-1-masahiroy@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ccac8e8de99cbcf5e7f53251ebce917bf7bcc29c ]
Since commit 181c8e091aae ("cgroup/cpuset: Introduce remote partition"),
a remote partition can be created underneath a non-partition root cpuset
as long as its exclusive_cpus are set to distribute exclusive CPUs down
to its children. The generate_sched_domains() function, however, doesn't
take into account this new behavior and hence will fail to create the
sched domain needed for a remote root (non-isolated) partition.
There are two issues related to remote partition support. First of
all, generate_sched_domains() has a fast path that is activated if
root_load_balance is true and top_cpuset.nr_subparts is non-zero. The
later condition isn't quite correct for remote partitions as nr_subparts
just shows the number of local child partitions underneath it. There
can be no local child partition under top_cpuset even if there are
remote partitions further down the hierarchy. Fix that by checking
for subpartitions_cpus which contains exclusive CPUs allocated to both
local and remote partitions.
Secondly, the valid partition check for subtree skipping in the csa[]
generation loop isn't enough as remote partition does not need to
have a partition root parent. Fix this problem by breaking csa[] array
generation loop of generate_sched_domains() into v1 and v2 specific parts
and checking a cpuset's exclusive_cpus before skipping its subtree in
the v2 case.
Also simplify generate_sched_domains() for cgroup v2 as only
non-isolating partition roots should be included in building the cpuset
array and none of the v1 scheduling attributes other than a different
way to create an isolated partition are supported.
Fixes: 181c8e091aae ("cgroup/cpuset: Introduce remote partition")
Signed-off-by: Waiman Long <longman@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1805c1729f52edaa021288473b09f9c7f74fb1ca ]
If only isolated partitions are being created underneath the cgroup root,
there will only be one sched domain with top_cpuset.effective_cpus. We can
skip the unnecessary sched domains scanning code and save some cycles.
Signed-off-by: Waiman Long <longman@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Stable-dep-of: ccac8e8de99c ("cgroup/cpuset: Fix remote root partition creation problem")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3e05b222382ec67dce7358d50b6006e91d028d8b ]
io_probe checks io_issue_def->not_supported, but we never really set
that field, as we mark non-supported functions through a specific ->prep
handler. This means we end up returning IO_URING_OP_SUPPORTED, even for
disabled operations. Fix it by just checking the prep handler itself.
Fixes: 66f4af93da57 ("io_uring: add support for probing opcodes")
Signed-off-by: Gabriel Krisman Bertazi <krisman@suse.de>
Link: https://lore.kernel.org/r/20240619020620.5301-2-krisman@suse.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7f91ccd8a608dbe39b97a6e43d635378d493f77e ]
dm_revalidate_zones() is called from dm_set_zone_restrictions() when the
mapped device queue limits are not yet set. However,
dm_revalidate_zones() calls blk_revalidate_disk_zones() and this
function consults and modifies the mapped device queue limits. Thus,
currently, blk_revalidate_disk_zones() operates on limits that are not
yet initialized.
Fix this by moving the call to dm_revalidate_zones() out of
dm_set_zone_restrictions() and into dm_table_set_restrictions() after
executing queue_limits_set().
To further cleanup dm_set_zones_restrictions(), the message about the
type of zone append (native or emulated) is also moved inside
dm_revalidate_zones().
Fixes: 1c0e720228ad ("dm: use queue_limits_set")
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Benjamin Marzinski <bmarzins@redhat.com>
Reviewed-by: Niklas Cassel <cassel@kernel.org>
Link: https://lore.kernel.org/r/20240611023639.89277-3-dlemoal@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 899ee2c3829c5ac14bfc7d3c4a5846c0b709b78f ]
Metadata added by bio_integrity_prep is using plain kmalloc, which leads
to random kernel memory being written media. For PI metadata this is
limited to the app tag that isn't used by kernel generated metadata,
but for non-PI metadata the entire buffer leaks kernel memory.
Fix this by adding the __GFP_ZERO flag to allocations for writes.
Fixes: 7ba1ba12eeef ("block: Block layer data integrity support")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Kanchan Joshi <joshi.k@samsung.com>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Link: https://lore.kernel.org/r/20240613084839.1044015-2-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 31ade7d4fdcf382beb8cb229a1f5d77e0f239672 ]
Discard and Write Zeroes are different operation and implemented
by different fallocate opcodes for ubd. If one fails the other one
can work and vice versa.
Split the code to disable the operations in ubd_handler to only
disable the operation that actually failed.
Fixes: 50109b5a03b4 ("um: Add support for DISCARD in the UBD Driver")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Acked-By: Anton Ivanov <anton.ivanov@cambridgegreys.com>
Link: https://lore.kernel.org/r/20240531074837.1648501-3-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5db755fbb1a0de4a4cfd5d5edfaa19853b9c56e6 ]
Instead of a separate handler function that leaves no work in the
interrupt hanler itself, split out a per-request end I/O helper and
clean up the coding style and variable naming while we're at it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Acked-By: Anton Ivanov <anton.ivanov@cambridgegreys.com>
Link: https://lore.kernel.org/r/20240531074837.1648501-2-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Stable-dep-of: 31ade7d4fdcf ("ubd: untagle discard vs write zeroes not support handling")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 17f91ac0843b50462a9c9c8f18df962338bd3db2 ]
The core md code calls the ->free method which already frees conf.
Fixes: 07f1a6850c5d ("md/raid1: fail run raid1 array when active disk less than one")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20240604172607.3185916-3-hch@lst.de
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 611d5cbc0b35a752e657a83eebadf40d814d006b ]
Deadlock occurs when mddev is being suspended while some flush bio is in
progress. It is a complex issue.
T1. the first flush is at the ending stage, it clears 'mddev->flush_bio'
and tries to submit data, but is blocked because mddev is suspended
by T4.
T2. the second flush sets 'mddev->flush_bio', and attempts to queue
md_submit_flush_data(), which is already running (T1) and won't
execute again if on the same CPU as T1.
T3. the third flush inc active_io and tries to flush, but is blocked because
'mddev->flush_bio' is not NULL (set by T2).
T4. mddev_suspend() is called and waits for active_io dec to 0 which is inc
by T3.
T1 T2 T3 T4
(flush 1) (flush 2) (third 3) (suspend)
md_submit_flush_data
mddev->flush_bio = NULL;
.
. md_flush_request
. mddev->flush_bio = bio
. queue submit_flushes
. .
. . md_handle_request
. . active_io + 1
. . md_flush_request
. . wait !mddev->flush_bio
. .
. . mddev_suspend
. . wait !active_io
. .
. submit_flushes
. queue_work md_submit_flush_data
. //md_submit_flush_data is already running (T1)
.
md_handle_request
wait resume
The root issue is non-atomic inc/dec of active_io during flush process.
active_io is dec before md_submit_flush_data is queued, and inc soon
after md_submit_flush_data() run.
md_flush_request
active_io + 1
submit_flushes
active_io - 1
md_submit_flush_data
md_handle_request
active_io + 1
make_request
active_io - 1
If active_io is dec after md_handle_request() instead of within
submit_flushes(), make_request() can be called directly intead of
md_handle_request() in md_submit_flush_data(), and active_io will
only inc and dec once in the whole flush process. Deadlock will be
fixed.
Additionally, the only difference between fixing the issue and before is
that there is no return error handling of make_request(). But after
previous patch cleaned md_write_start(), make_requst() only return error
in raid5_make_request() by dm-raid, see commit 41425f96d7aa ("dm-raid456,
md/raid456: fix a deadlock for dm-raid456 while io concurrent with
reshape)". Since dm always splits data and flush operation into two
separate io, io size of flush submitted by dm always is 0, make_request()
will not be called in md_submit_flush_data(). To prevent future
modifications from introducing issues, add WARN_ON to ensure
make_request() no error is returned in this context.
Fixes: fa2bbff7b0b4 ("md: synchronize flush io with array reconfiguration")
Signed-off-by: Li Nan <linan122@huawei.com>
Signed-off-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20240525185257.3896201-3-linan666@huaweicloud.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 399ced9594dfab51b782798efe60a2376cd5b724 ]
When RCU-TASKS-TRACE pre-gp takes a snapshot of the current task running
on all online CPUs, no explicit ordering synchronizes properly with a
context switch. This lack of ordering can permit the new task to miss
pre-grace-period update-side accesses. The following diagram, courtesy
of Paul, shows the possible bad scenario:
CPU 0 CPU 1
----- -----
// Pre-GP update side access
WRITE_ONCE(*X, 1);
smp_mb();
r0 = rq->curr;
RCU_INIT_POINTER(rq->curr, TASK_B)
spin_unlock(rq)
rcu_read_lock_trace()
r1 = X;
/* ignore TASK_B */
Either r0==TASK_B or r1==1 is needed but neither is guaranteed.
One possible solution to solve this is to wait for an RCU grace period
at the beginning of the RCU-tasks-trace grace period before taking the
current tasks snaphot. However this would introduce large additional
latencies to RCU-tasks-trace grace periods.
Another solution is to lock the target runqueue while taking the current
task snapshot. This ensures that the update side sees the latest context
switch and subsequent context switches will see the pre-grace-period
update side accesses.
This commit therefore adds runqueue locking to cpu_curr_snapshot().
Fixes: e386b6725798 ("rcu-tasks: Eliminate RCU Tasks Trace IPIs to online CPUs")
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 123b158635505c89ed0d3ef45c5845ff9030a466 ]
Commit 598afa050403 ("kbuild: warn objects shared among multiple modules")
was added to track down cases where the same object is linked into
multiple modules. This can cause serious problems if some modules are
builtin while others are not.
That test triggers this warning:
scripts/Makefile.build:236: drivers/edac/Makefile: skx_common.o is added to multiple modules: i10nm_edac skx_edac
Make this a separate module instead.
[Tony: Added more background details to commit message]
Fixes: d4dc89d069aa ("EDAC, i10nm: Add a driver for Intel 10nm server processors")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Link: https://lore.kernel.org/all/20240529095132.1929397-1-arnd@kernel.org/
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ef901b38d3a4610c4067cd306c1a209f32e7ca31 ]
Add check for the return value of clk_prepare() and return the error if
it fails in order to catch the error.
Fixes: 4a2f83b7f780 ("spi: atmel-quadspi: add runtime pm support")
Signed-off-by: Chen Ni <nichen@iscas.ac.cn>
Link: https://msgid.link/r/20240515084028.3210406-1-nichen@iscas.ac.cn
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a7ed3a11202d90939a3d00ffcc8cf50703cb7b35 ]
The SPI "hard" controller in PolarFire SoC has eight CS lines, but only
one CS line is wired. When the 'num-cs' property is not specified in
the device tree, the driver defaults to the MAX_CS value, which has
been fixed to 1 to match the hardware configuration; however, when the
'num-cs' property is explicitly defined in the device tree, it
overrides the default value.
Fixes: 9ac8d17694b6 ("spi: add support for microchip fpga spi controllers")
Signed-off-by: Prajna Rajendra Kumar <prajna.rajendrakumar@microchip.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://msgid.link/r/20240514104508.938448-3-prajna.rajendrakumar@microchip.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit ed7f2afdd0e043a397677e597ced0830b83ba0b3 upstream.
The cited commit missed to check against the validity of the frame length
in the tap_get_user_xdp() path, which could cause a corrupted skb to be
sent downstack. Even before the skb is transmitted, the
tap_get_user_xdp()-->skb_set_network_header() may assume the size is more
than ETH_HLEN. Once transmitted, this could either cause out-of-bound
access beyond the actual length, or confuse the underlayer with incorrect
or inconsistent header length in the skb metadata.
In the alternative path, tap_get_user() already prohibits short frame which
has the length less than Ethernet header size from being transmitted.
This is to drop any frame shorter than the Ethernet header size just like
how tap_get_user() does.
CVE: CVE-2024-41090
Link: https://lore.kernel.org/netdev/1717026141-25716-1-git-send-email-si-wei.liu@oracle.com/
Fixes: 0efac27791ee ("tap: accept an array of XDP buffs through sendmsg()")
Cc: stable@vger.kernel.org
Signed-off-by: Si-Wei Liu <si-wei.liu@oracle.com>
Signed-off-by: Dongli Zhang <dongli.zhang@oracle.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Jason Wang <jasowang@redhat.com>
Link: https://patch.msgid.link/20240724170452.16837-2-dongli.zhang@oracle.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 049584807f1d797fc3078b68035450a9769eb5c3 upstream.
The cited commit missed to check against the validity of the frame length
in the tun_xdp_one() path, which could cause a corrupted skb to be sent
downstack. Even before the skb is transmitted, the
tun_xdp_one-->eth_type_trans() may access the Ethernet header although it
can be less than ETH_HLEN. Once transmitted, this could either cause
out-of-bound access beyond the actual length, or confuse the underlayer
with incorrect or inconsistent header length in the skb metadata.
In the alternative path, tun_get_user() already prohibits short frame which
has the length less than Ethernet header size from being transmitted for
IFF_TAP.
This is to drop any frame shorter than the Ethernet header size just like
how tun_get_user() does.
CVE: CVE-2024-41091
Inspired-by: https://lore.kernel.org/netdev/1717026141-25716-1-git-send-email-si-wei.liu@oracle.com/
Fixes: 043d222f93ab ("tuntap: accept an array of XDP buffs through sendmsg()")
Cc: stable@vger.kernel.org
Signed-off-by: Dongli Zhang <dongli.zhang@oracle.com>
Reviewed-by: Si-Wei Liu <si-wei.liu@oracle.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Jason Wang <jasowang@redhat.com>
Link: https://patch.msgid.link/20240724170452.16837-3-dongli.zhang@oracle.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f8138f2ad2f745b9a1c696a05b749eabe44337ea upstream.
When I wrote commit 3cad1bc01041 ("filelock: Remove locks reliably when
fcntl/close race is detected"), I missed that there are two copies of the
code I was patching: The normal version, and the version for 64-bit offsets
on 32-bit kernels.
Thanks to Greg KH for stumbling over this while doing the stable
backport...
Apply exactly the same fix to the compat path for 32-bit kernels.
Fixes: c293621bbf67 ("[PATCH] stale POSIX lock handling")
Cc: stable@kernel.org
Link: https://bugs.chromium.org/p/project-zero/issues/detail?id=2563
Signed-off-by: Jann Horn <jannh@google.com>
Link: https://lore.kernel.org/r/20240723-fs-lock-recover-compatfix-v1-1-148096719529@google.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 3bfd7c0ba184de99e9f5083b29e5308f30767265 upstream.
When the UMP Endpoint is configured with static blocks, the block
configuration will never change, hence the unused ports will be
unchanged as well. Creating sequencer ports for those unused ports
is simply useless, and it might be rather confusing for users.
The idea behind the inactive ports was for allowing connections
from/to ports that can become usable later, but this will never
happen for inactive groups in static blocks.
Let's change the sequencer UMP binding to skip those unused ports when
the UMP EP is with static blocks.
Fixes: 81fd444aa371 ("ALSA: seq: Bind UMP device")
Cc: <stable@vger.kernel.org>
Link: https://patch.msgid.link/20240717083322.25892-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 88e98af9f4b5b0d60c1fe7f7f2701b5467691e75 upstream.
When suspended, the DMA channel may enter PAUSE state if dmaengine_pause()
is supported by DMA.
At this state, dmaengine_synchronize() should not be called, otherwise
the DMA channel can't be resumed successfully.
Fixes: e8343410ddf0 ("ALSA: dmaengine: Synchronize dma channel after drop()")
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Cc: <stable@vger.kernel.org>
Link: https://patch.msgid.link/1721198693-27636-1-git-send-email-shengjiu.wang@nxp.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 074992a1163295d717faa21d1818c4c19ef6e676 upstream.
For Gen-1 targets like SM6115, it is seen that stressing out the
controller in host mode results in HC died error:
xhci-hcd.12.auto: xHCI host not responding to stop endpoint command
xhci-hcd.12.auto: xHCI host controller not responding, assume dead
xhci-hcd.12.auto: HC died; cleaning up
And at this instant only restarting the host mode fixes it. Disable
SuperSpeed instance in park mode for SM6115 to mitigate this issue.
Cc: stable@vger.kernel.org
Fixes: 97e563bf5ba1 ("arm64: dts: qcom: sm6115: Add basic soc dtsi")
Signed-off-by: Krishna Kurapati <quic_kriskura@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240704152848.3380602-6-quic_kriskura@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit cf4d6d54eadb60d2ee4d31c9d92299f5e8dcb55c upstream.
For Gen-1 targets like SDM845, it is seen that stressing out the
controller in host mode results in HC died error:
xhci-hcd.12.auto: xHCI host not responding to stop endpoint command
xhci-hcd.12.auto: xHCI host controller not responding, assume dead
xhci-hcd.12.auto: HC died; cleaning up
And at this instant only restarting the host mode fixes it. Disable
SuperSpeed instance in park mode for SDM845 to mitigate this issue.
Cc: stable@vger.kernel.org
Fixes: ca4db2b538a1 ("arm64: dts: qcom: sdm845: Add USB-related nodes")
Signed-off-by: Krishna Kurapati <quic_kriskura@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240704152848.3380602-9-quic_kriskura@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit dc6ba95c6c4400a84cca5b419b34ae852a08cfb5 upstream.
For Gen-1 targets like IPQ8074, it is seen that stressing out the
controller in host mode results in HC died error:
xhci-hcd.12.auto: xHCI host not responding to stop endpoint command
xhci-hcd.12.auto: xHCI host controller not responding, assume dead
xhci-hcd.12.auto: HC died; cleaning up
And at this instant only restarting the host mode fixes it. Disable
SuperSpeed instance in park mode for IPQ8074 to mitigate this issue.
Cc: stable@vger.kernel.org
Fixes: 5e09bc51d07b ("arm64: dts: ipq8074: enable USB support")
Signed-off-by: Krishna Kurapati <quic_kriskura@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240704152848.3380602-3-quic_kriskura@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit fad58a41b84667cb6c9232371fc3af77d4443889 upstream.
For Gen-1 targets like SDM630, it is seen that stressing out the
controller in host mode results in HC died error:
xhci-hcd.12.auto: xHCI host not responding to stop endpoint command
xhci-hcd.12.auto: xHCI host controller not responding, assume dead
xhci-hcd.12.auto: HC died; cleaning up
And at this instant only restarting the host mode fixes it. Disable
SuperSpeed instance in park mode for SDM630 to mitigate this issue.
Cc: stable@vger.kernel.org
Fixes: c65a4ed2ea8b ("arm64: dts: qcom: sdm630: Add USB configuration")
Signed-off-by: Krishna Kurapati <quic_kriskura@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240704152848.3380602-5-quic_kriskura@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 4ae4837871ee8c8b055cf8131f65d31ee4208fa0 upstream.
For Gen-1 targets like IPQ6018, it is seen that stressing out the
controller in host mode results in HC died error:
xhci-hcd.12.auto: xHCI host not responding to stop endpoint command
xhci-hcd.12.auto: xHCI host controller not responding, assume dead
xhci-hcd.12.auto: HC died; cleaning up
And at this instant only restarting the host mode fixes it. Disable
SuperSpeed instance in park mode for IPQ6018 to mitigate this issue.
Cc: stable@vger.kernel.org
Fixes: 20bb9e3dd2e4 ("arm64: dts: qcom: ipq6018: add usb3 DT description")
Signed-off-by: Krishna Kurapati <quic_kriskura@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240704152848.3380602-2-quic_kriskura@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 0046325ae52079b46da13a7f84dd7b2a6f7c38f8 upstream.
For Gen-1 targets like MSM8998, it is seen that stressing out the
controller in host mode results in HC died error:
xhci-hcd.12.auto: xHCI host not responding to stop endpoint command
xhci-hcd.12.auto: xHCI host controller not responding, assume dead
xhci-hcd.12.auto: HC died; cleaning up
And at this instant only restarting the host mode fixes it. Disable
SuperSpeed instance in park mode for MSM8998 to mitigate this issue.
Cc: stable@vger.kernel.org
Fixes: 026dad8f5873 ("arm64: dts: qcom: msm8998: Add USB-related nodes")
Signed-off-by: Krishna Kurapati <quic_kriskura@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240704152848.3380602-4-quic_kriskura@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c5d57eb7d06df16c07037cea5dacfd74d49d1833 upstream.
For Gen-1 targets like SM6350, it is seen that stressing out the
controller in host mode results in HC died error:
xhci-hcd.12.auto: xHCI host not responding to stop endpoint command
xhci-hcd.12.auto: xHCI host controller not responding, assume dead
xhci-hcd.12.auto: HC died; cleaning up
And at this instant only restarting the host mode fixes it. Disable
SuperSpeed instance in park mode for SM6350 to mitigate this issue.
Cc: stable@vger.kernel.org
Fixes: 23737b9557fe ("arm64: dts: qcom: sm6350: Add USB1 nodes")
Signed-off-by: Krishna Kurapati <quic_kriskura@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240704152848.3380602-7-quic_kriskura@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 44ea1ae3cf95db97e10d6ce17527948121f1dd4b upstream.
For Gen-1 targets like MSM8996, it is seen that stressing out the
controller in host mode results in HC died error:
xhci-hcd.12.auto: xHCI host not responding to stop endpoint command
xhci-hcd.12.auto: xHCI host controller not responding, assume dead
xhci-hcd.12.auto: HC died; cleaning up
And at this instant only restarting the host mode fixes it. Disable
SuperSpeed instance in park mode for MSM8996 to mitigate this issue.
Cc: stable@vger.kernel.org
Fixes: 1e39255ed29d ("arm64: dts: msm8996: Add device node for qcom,dwc3")
Signed-off-by: Krishna Kurapati <quic_kriskura@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240704152848.3380602-8-quic_kriskura@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ae5cee8e7349d7e5deff4cf90a08cbd738287155 upstream.
The 1.2v HS PHY shared regulator is actually LDO2 from PM8550ve id J.
Also add the missing supplies to QMP PHYs.
Fixes: d7e03cce0400 ("arm64: dts: qcom: x1e80100-crd: Enable more support")
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Cc: stable@vger.kernel.org # 6.9
Link: https://lore.kernel.org/r/20240530-x1e80100-dts-fix-usb-phy-supplies-v1-1-6eb72a546227@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
