IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
'first' will always be greater than or equal to 0, it is unnecessary to
repeat the 0 check, clean it up.
Signed-off-by: Jackie Liu <liuyun01@kylinos.cn>
Signed-off-by: Song Liu <song@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
raid5_get_active_stripe() can sleep in various situations and it
is called by make_stripe_request() while inside the
prepare_to_wait()/finish_wait() section. Nested waits like this are
not supported.
This was noticed while making other changes that add different sleeps
to raid5_get_active_stripe() that caused a WARNING with
CONFIG_DEBUG_ATOMIC_SLEEP.
No ill effects have been noticed with the code as is, but theoretically
a nested and here could cause a dead lock so it should be fixed.
To fix this, convert the prepare_to_wait() call to use wake_woken()
which supports nested sleeps.
Link: https://lwn.net/Articles/628628/
Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Signed-off-by: Song Liu <song@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
For unaligned IO that have nearly maximum sectors, the number of stripes
will end up being one greater than the size of the bitmap. When this
happens, the last stripe in the IO will not be processed as it should
be, resulting in data corruption.
However, this is not normally seen when the backing block devices have
4K physical block sizes since the block layer will split the request
before that happens.
To fix this increase the bitmap size by one bit and ensure the full
number of stripes are checked when calling find_first_bit().
Reported-by: David Sloan <David.Sloan@eideticom.com>
Fixes: 7e55c60acfbb ("md/raid5: Pivot raid5_make_request()")
Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Signed-off-by: Song Liu <song@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The block layer defaults the maximum segments to 128, which means
requests tend to get split around the 512KB depending on how many
pages can be merged. There's no such restriction in the raid5 code
so increase the limit to USHRT_MAX so that larger requests can be
sent as one.
Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Signed-off-by: Song Liu <song@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Add a debug print for raid5_make_request() so that each request is
printed and add the logical sector number to the debug print in
__add_stripe_bio().
Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Signed-off-by: Song Liu <song@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
raid5_make_request() loops through every page in the request,
finds the appropriate stripe and adds the bio for that page in the
disk.
This causes a great deal of contention on the hash_lock and extra
work seeing each stripe must be found once for every data disk.
The number of times a stripe must be found can be reduced by pivoting
raid5_make_request() so that it loops through every stripe and then
loops through every disk in that stripe to see if the bio must be
added. This reduces the number of times the hash lock must be taken
by a factor equal to the number of data disks.
To accomplish this, the logical sectors that have already been added
must be tracked. Tracking them is done with a bitmap: the bits
for all pages are set at the start of the request and each bit
is cleared once the bio is added to a stripe.
Finding the next sector to be done is then just a call to
find_first_bit() so that sectors that have been done can simply be
skipped.
One minor downside is that the maximum sectors for a request must be
limited so that the bitmap can be appropriately sized on the stack.
This limit is arbitrarily chosen to be 256 stripe pages which works out
to 1MB if PAGE_SIZE == DEFAULT_STRIPE_SIZE. This doesn't actually
restrict the maximum request further seeing the default block queue
settings are used which restricts the number of segments to 128 (which
results in request sizes that are approximately 512KB).
Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Signed-off-by: Song Liu <song@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
When testing if a previous stripe has had reshape expand past it, use
the earliest or latest logical sector in all the disks for that stripe
head. This will allow adding multiple disks at a time in a subesquent
patch.
To do this cleaner, refactor the check into a helper function called
stripe_ahead_of_reshape().
Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Song Liu <song@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Factor out two helper functions from add_stripe_bio(): one to check for
overlap (stripe_bio_overlaps()), and one to actually add the bio to the
stripe (__add_stripe_bio()). The latter function will always succeed.
This will be useful in the next patch so that overlap can be checked for
multiple disks before adding any
Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Song Liu <song@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
When batching, every stripe head has to find the previous stripe head to
add to the batch list. This involves taking the hash lock which is
highly contended during IO.
Instead of finding the previous stripe_head each time, store a
reference to the previous stripe_head in a pointer so that it doesn't
require taking the contended lock another time.
The reference to the previous stripe must be released before scheduling
and waiting for work to get done. Otherwise, it can hold up
raid5_activate_delayed() and deadlock.
Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Acked-by: Guoqing Jiang <guoqing.jiang@linux.dev>
Signed-off-by: Song Liu <song@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The for loop with retry label can be more cleanly expressed as a while
loop by moving the logical_sector increment into the success path.
No functional changes intended.
Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Song Liu <song@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Now that prepare_to_wait() isn't in the way, move read_sequcount_begin()
into make_stripe_request().
No functional changes intended.
Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Guoqing Jiang <guoqing.jiang@linux.dev>
Signed-off-by: Song Liu <song@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
prepare_to_wait() can be reasonably called after schedule instead of
setting a flag and preparing in the next loop iteration.
This means that prepare_to_wait() will be called before
read_seqcount_begin(), but there shouldn't be any reason that the order
matters here. On the first iteration of the loop prepare_to_wait() is
already called first.
Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Guoqing Jiang <guoqing.jiang@linux.dev>
Signed-off-by: Song Liu <song@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Factor out the inner loop of raid5_make_request() into it's own helper
called make_stripe_request().
The helper returns a number of statuses: SUCCESS, RETRY,
SCHEDULE_AND_RETRY and FAIL. This makes the code a bit easier to
understand and allows the SCHEDULE_AND_RETRY path to be made common.
A context structure is added to contain do_flush. It will be used
more in subsequent patches for state that needs to be kept
outside the loop.
No functional changes intended. This will be cleaned up further in
subsequent patches to untangle the gen_lock and do_prepare logic
further.
Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Signed-off-by: Song Liu <song@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Both uses of find_stripe() require a fairly complicated dance to
increment the reference count. Move this into a common find_get_stripe()
helper.
No functional changes intended.
Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Acked-by: Guoqing Jiang <guoqing.jiang@linux.dev>
Signed-off-by: Song Liu <song@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
stripe_add_to_batch_list() is better done in the loop in make_request
instead of inside add_stripe_bio(). This is clearer and allows for
storing the batch_head state outside the loop in a subsequent patch.
The call to add_stripe_bio() in retry_aligned_read() is for read
and batching only applies to write. So it's impossible for batching
to happen at that call site.
No functional changes intended.
Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Guoqing Jiang <guoqing.jiang@linux.dev>
Signed-off-by: Song Liu <song@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Break immediately if raid5_get_active_stripe() returns NULL and deindent
the rest of the loop. Annotate this check with an unlikely().
This makes the code easier to read and reduces the indentation level.
No functional changes intended.
Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Guoqing Jiang <guoqing.jiang@linux.dev>
Signed-off-by: Song Liu <song@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
There are a few uses of an ugly ternary operator in raid5_make_request()
to check if a sector is a head of a reshape sector.
Factor this out into a simple helper called ahead_of_reshape().
No functional changes intended.
Suggested-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Song Liu <song@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The check in raid5_make_request differs very slightly from the logic
that causes it to block lower down. This likely does not cause a bug
as the check is fuzzy anyway (as reshape may move on between the first
check and the subsequent check). However, make it consistent so it can
be cleaned up in a subsequent patch.
The condition which causes the schedule is:
!(mddev->reshape_backwards ? logical_sector < conf->reshape_progress :
logical_sector >= conf->reshape_progress) &&
(mddev->reshape_backwards ? logical_sector < conf->reshape_safe :
logical_sector >= conf->reshape_safe)
The condition that causes the early bailout is made to match this.
Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Signed-off-by: Song Liu <song@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The raid5-cache code relies on there being no IO in flight when
log_exit() is called. There are two places where this is not
guaranteed so add mddev_suspend() and mddev_resume() calls to these
sites.
The site in raid5_change_consistency_policy() is in the error path,
and another similar call site already has suspend/resume calls just
below it; so it should be equally safe to make that change here.
There is one remaining site in raid5_remove_disk() that we call log_exit()
without suspending the array. Unfortunately, as the comment stated, we
cannot call mddev_suspend from raid5d.
Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Song Liu <song@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
-----BEGIN PGP SIGNATURE-----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=celk
-----END PGP SIGNATURE-----
Merge tag 'for-5.20/block-2022-07-29' of git://git.kernel.dk/linux-block
Pull block updates from Jens Axboe:
- Improve the type checking of request flags (Bart)
- Ensure queue mapping for a single queues always picks the right queue
(Bart)
- Sanitize the io priority handling (Jan)
- rq-qos race fix (Jinke)
- Reserved tags handling improvements (John)
- Separate memory alignment from file/disk offset aligment for O_DIRECT
(Keith)
- Add new ublk driver, userspace block driver using io_uring for
communication with the userspace backend (Ming)
- Use try_cmpxchg() to cleanup the code in various spots (Uros)
- Finally remove bdevname() (Christoph)
- Clean up the zoned device handling (Christoph)
- Clean up independent access range support (Christoph)
- Clean up and improve block sysfs handling (Christoph)
- Clean up and improve teardown of block devices.
This turns the usual two step process into something that is simpler
to implement and handle in block drivers (Christoph)
- Clean up chunk size handling (Christoph)
- Misc cleanups and fixes (Bart, Bo, Dan, GuoYong, Jason, Keith, Liu,
Ming, Sebastian, Yang, Ying)
* tag 'for-5.20/block-2022-07-29' of git://git.kernel.dk/linux-block: (178 commits)
ublk_drv: fix double shift bug
ublk_drv: make sure that correct flags(features) returned to userspace
ublk_drv: fix error handling of ublk_add_dev
ublk_drv: fix lockdep warning
block: remove __blk_get_queue
block: call blk_mq_exit_queue from disk_release for never added disks
blk-mq: fix error handling in __blk_mq_alloc_disk
ublk: defer disk allocation
ublk: rewrite ublk_ctrl_get_queue_affinity to not rely on hctx->cpumask
ublk: fold __ublk_create_dev into ublk_ctrl_add_dev
ublk: cleanup ublk_ctrl_uring_cmd
ublk: simplify ublk_ch_open and ublk_ch_release
ublk: remove the empty open and release block device operations
ublk: remove UBLK_IO_F_PREFLUSH
ublk: add a MAINTAINERS entry
block: don't allow the same type rq_qos add more than once
mmc: fix disk/queue leak in case of adding disk failure
ublk_drv: fix an IS_ERR() vs NULL check
ublk: remove UBLK_IO_F_INTEGRITY
ublk_drv: remove unneeded semicolon
...
-----BEGIN PGP SIGNATURE-----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=zviX
-----END PGP SIGNATURE-----
Merge tag 'block-5.19-2022-07-21' of git://git.kernel.dk/linux-block
Pull block fix from Jens Axboe:
"Just a single fix for missing error propagation for an allocation
failure in raid5"
* tag 'block-5.19-2022-07-21' of git://git.kernel.dk/linux-block:
md/raid5: missing error code in setup_conf()
Improve static type checking by using the enum req_op type for variables
that represent a request operation and the new blk_opf_t type for
variables that represent request flags.
Acked-by: Song Liu <song@kernel.org>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20220714180729.1065367-37-bvanassche@acm.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
There's a KASAN warning in raid5_add_disk when running the LVM testsuite.
The warning happens in the test
lvconvert-raid-reshape-linear_to_raid6-single-type.sh. We fix the warning
by verifying that rdev->saved_raid_disk is within limits.
Cc: stable@vger.kernel.org
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
There's a KASAN warning in raid5_remove_disk when running the LVM
testsuite. We fix this warning by verifying that the "number" variable is
within limits.
Cc: stable@vger.kernel.org
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Use the %pg format specifier to save on stack consumption and code size.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Song Liu <song@kernel.org>
The discard_alignment queue limit is named a bit misleading means the
offset into the block device at which the discard granularity starts.
Setting it to the discard granularity as done by raid5 is mostly
harmless but also useless.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Song Liu <song@kernel.org>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Link: https://lore.kernel.org/r/20220418045314.360785-7-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
A handful of functions note the device_lock must be held with a comment
but this is not comprehensive. Many other functions hold the lock when
taken so add an __must_hold() to each call to annotate when the lock is
held.
This makes it a bit easier to analyse device_lock.
Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Song Liu <song@kernel.org>
The mddev_lock should be held during raid5_remove_disk() which is when
the rdev/replacement pointers are modified. So any access to these
pointers marked __rcu should be safe whenever the mddev_lock is held.
There are numerous such access that currently produce sparse warnings.
Add a helper function, rdev_mdlock_deref() that wraps
rcu_dereference_protected() in all these instances.
This annotation fixes a number of sparse warnings.
Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Song Liu <song@kernel.org>
There are a number of accesses to __rcu variables that should be safe
because nr_pending in the disk is known to be elevated.
Create a wrapper around rcu_dereference_protected() to annotate these
accesses and verify that nr_pending is non-zero.
This fixes a number of sparse warnings.
Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Song Liu <song@kernel.org>
rdev and replacement are protected in some circumstances with
rcu_dereference and synchronize_rcu (in raid5_remove_disk()). However,
they were not annotated with __rcu so a sparse warning is emitted for
every rcu_dereference() call.
Add the __rcu annotation and fix up the initialization with
RCU_INIT_POINTER, all pointer modifications with rcu_assign_pointer(),
a few cases where the pointer value is tested with rcu_access_pointer()
and one case where READ_ONCE() is used instead of rcu_dereference(),
a case in print_raid5_conf() that should have rcu_dereference() and
rcu_read_[un]lock() calls.
Additional sparse issues will be fixed up in further commits.
Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Song Liu <song@kernel.org>
Be more careful about the error returns. Most errors in this function
are actually ENOMEM, but it forcibly returns EIO if conf has been
allocated.
Instead return ret and ensure it is set appropriately before each goto
abort.
Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Song Liu <song@kernel.org>
Raid456 module had allowed to achieve failed state. It was fixed by
fb73b357fb9 ("raid5: block failing device if raid will be failed").
This fix introduces a bug, now if raid5 fails during IO, it may result
with a hung task without completion. Faulty flag on the device is
necessary to process all requests and is checked many times, mainly in
analyze_stripe().
Allow to set faulty on drive again and set MD_BROKEN if raid is failed.
As a result, this level is allowed to achieve failed state again, but
communication with userspace (via -EBUSY status) will be preserved.
This restores possibility to fail array via #mdadm --set-faulty command
and will be fixed by additional verification on mdadm side.
Reproduction steps:
mdadm -CR imsm -e imsm -n 3 /dev/nvme[0-2]n1
mdadm -CR r5 -e imsm -l5 -n3 /dev/nvme[0-2]n1 --assume-clean
mkfs.xfs /dev/md126 -f
mount /dev/md126 /mnt/root/
fio --filename=/mnt/root/file --size=5GB --direct=1 --rw=randrw
--bs=64k --ioengine=libaio --iodepth=64 --runtime=240 --numjobs=4
--time_based --group_reporting --name=throughput-test-job
--eta-newline=1 &
echo 1 > /sys/block/nvme2n1/device/device/remove
echo 1 > /sys/block/nvme1n1/device/device/remove
[ 1475.787779] Call Trace:
[ 1475.793111] __schedule+0x2a6/0x700
[ 1475.799460] schedule+0x38/0xa0
[ 1475.805454] raid5_get_active_stripe+0x469/0x5f0 [raid456]
[ 1475.813856] ? finish_wait+0x80/0x80
[ 1475.820332] raid5_make_request+0x180/0xb40 [raid456]
[ 1475.828281] ? finish_wait+0x80/0x80
[ 1475.834727] ? finish_wait+0x80/0x80
[ 1475.841127] ? finish_wait+0x80/0x80
[ 1475.847480] md_handle_request+0x119/0x190
[ 1475.854390] md_make_request+0x8a/0x190
[ 1475.861041] generic_make_request+0xcf/0x310
[ 1475.868145] submit_bio+0x3c/0x160
[ 1475.874355] iomap_dio_submit_bio.isra.20+0x51/0x60
[ 1475.882070] iomap_dio_bio_actor+0x175/0x390
[ 1475.889149] iomap_apply+0xff/0x310
[ 1475.895447] ? iomap_dio_bio_actor+0x390/0x390
[ 1475.902736] ? iomap_dio_bio_actor+0x390/0x390
[ 1475.909974] iomap_dio_rw+0x2f2/0x490
[ 1475.916415] ? iomap_dio_bio_actor+0x390/0x390
[ 1475.923680] ? atime_needs_update+0x77/0xe0
[ 1475.930674] ? xfs_file_dio_aio_read+0x6b/0xe0 [xfs]
[ 1475.938455] xfs_file_dio_aio_read+0x6b/0xe0 [xfs]
[ 1475.946084] xfs_file_read_iter+0xba/0xd0 [xfs]
[ 1475.953403] aio_read+0xd5/0x180
[ 1475.959395] ? _cond_resched+0x15/0x30
[ 1475.965907] io_submit_one+0x20b/0x3c0
[ 1475.972398] __x64_sys_io_submit+0xa2/0x180
[ 1475.979335] ? do_io_getevents+0x7c/0xc0
[ 1475.986009] do_syscall_64+0x5b/0x1a0
[ 1475.992419] entry_SYSCALL_64_after_hwframe+0x65/0xca
[ 1476.000255] RIP: 0033:0x7f11fc27978d
[ 1476.006631] Code: Bad RIP value.
[ 1476.073251] INFO: task fio:3877 blocked for more than 120 seconds.
Cc: stable@vger.kernel.org
Fixes: fb73b357fb9 ("raid5: block failing device if raid will be failed")
Reviewd-by: Xiao Ni <xni@redhat.com>
Signed-off-by: Mariusz Tkaczyk <mariusz.tkaczyk@linux.intel.com>
Signed-off-by: Song Liu <song@kernel.org>
Just use a non-zero max_discard_sectors as an indicator for discard
support, similar to what is done for write zeroes.
The only places where needs special attention is the RAID5 driver,
which must clear discard support for security reasons by default,
even if the default stacking rules would allow for it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Acked-by: Christoph Böhmwalder <christoph.boehmwalder@linbit.com> [drbd]
Acked-by: Jan Höppner <hoeppner@linux.ibm.com> [s390]
Acked-by: Coly Li <colyli@suse.de> [bcache]
Acked-by: David Sterba <dsterba@suse.com> [btrfs]
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Link: https://lore.kernel.org/r/20220415045258.199825-25-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Add a helper to check the nonrot flag based on the block_device instead
of having to poke into the block layer internal request_queue.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Acked-by: David Sterba <dsterba@suse.com> [btrfs]
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Link: https://lore.kernel.org/r/20220415045258.199825-12-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
-----BEGIN PGP SIGNATURE-----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=efaq
-----END PGP SIGNATURE-----
Merge tag 'for-5.18/write-streams-2022-03-18' of git://git.kernel.dk/linux-block
Pull NVMe write streams removal from Jens Axboe:
"This removes the write streams support in NVMe. No vendor ever really
shipped working support for this, and they are not interested in
supporting it.
With the NVMe support gone, we have nothing in the tree that supports
this. Remove passing around of the hints.
The only discussion point in this patchset imho is the fact that the
file specific write hint setting/getting fcntl helpers will now return
-1/EINVAL like they did before we supported write hints. No known
applications use these functions, I only know of one prototype that I
help do for RocksDB, and that's not used. That said, with a change
like this, it's always a bit controversial. Alternatively, we could
just make them return 0 and pretend it worked. It's placement based
hints after all"
* tag 'for-5.18/write-streams-2022-03-18' of git://git.kernel.dk/linux-block:
fs: remove fs.f_write_hint
fs: remove kiocb.ki_hint
block: remove the per-bio/request write hint
nvme: remove support or stream based temperature hint
This series consists of the usual driver updates (qla2xxx, pm8001,
libsas, smartpqi, scsi_debug, lpfc, iscsi, mpi3mr) plus minor updates
and bug fixes. The high blast radius core update is the removal of
write same, which affects block and several non-SCSI devices. The
other big change, which is more local, is the removal of the SCSI
pointer.
Signed-off-by: James E.J. Bottomley <jejb@linux.ibm.com>
-----BEGIN PGP SIGNATURE-----
iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCYjzDQyYcamFtZXMuYm90
dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishQMYAQDEWUGV
6U0+736AHVtOfiMNfiRN79B1HfXVoHvemnPcTwD/UlndwFfy/3GGOtoZmqEpc73J
Ec1HDuUCE18H1H2QAh0=
=/Ty9
-----END PGP SIGNATURE-----
Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI updates from James Bottomley:
"This series consists of the usual driver updates (qla2xxx, pm8001,
libsas, smartpqi, scsi_debug, lpfc, iscsi, mpi3mr) plus minor updates
and bug fixes.
The high blast radius core update is the removal of write same, which
affects block and several non-SCSI devices. The other big change,
which is more local, is the removal of the SCSI pointer"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (281 commits)
scsi: scsi_ioctl: Drop needless assignment in sg_io()
scsi: bsg: Drop needless assignment in scsi_bsg_sg_io_fn()
scsi: lpfc: Copyright updates for 14.2.0.0 patches
scsi: lpfc: Update lpfc version to 14.2.0.0
scsi: lpfc: SLI path split: Refactor BSG paths
scsi: lpfc: SLI path split: Refactor Abort paths
scsi: lpfc: SLI path split: Refactor SCSI paths
scsi: lpfc: SLI path split: Refactor CT paths
scsi: lpfc: SLI path split: Refactor misc ELS paths
scsi: lpfc: SLI path split: Refactor VMID paths
scsi: lpfc: SLI path split: Refactor FDISC paths
scsi: lpfc: SLI path split: Refactor LS_RJT paths
scsi: lpfc: SLI path split: Refactor LS_ACC paths
scsi: lpfc: SLI path split: Refactor the RSCN/SCR/RDF/EDC/FARPR paths
scsi: lpfc: SLI path split: Refactor PLOGI/PRLI/ADISC/LOGO paths
scsi: lpfc: SLI path split: Refactor base ELS paths and the FLOGI path
scsi: lpfc: SLI path split: Introduce lpfc_prep_wqe
scsi: lpfc: SLI path split: Refactor fast and slow paths to native SLI4
scsi: lpfc: SLI path split: Refactor lpfc_iocbq
scsi: lpfc: Use kcalloc()
...
Use bio_init to initialize the bios when needed to the full state
instead of a partial initialization plus later setting of dev and op
and bio_reset.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Song Liu <song@kernel.org>
With the NVMe support for this gone, there are no consumers of these hints
left, so remove them.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20220304175556.407719-2-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
There are no more end-users of REQ_OP_WRITE_SAME left, so we can start
deleting it.
Link: https://lore.kernel.org/r/20220209082828.2629273-6-hch@lst.de
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Pass a block_device to bio_clone_fast and __bio_clone_fast and give
the functions more suitable names.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Mike Snitzer <snitzer@redhat.com>
Link: https://lore.kernel.org/r/20220202160109.108149-14-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Pass the block_device that we plan to use this bio for and the
operation to bio_reset to optimize the assigment. A NULL block_device
can be passed, both for the passthrough case on a raw request_queue and
to temporarily avoid refactoring some nasty code.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Link: https://lore.kernel.org/r/20220124091107.642561-20-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Pass the block_device that we plan to use this bio for and the
operation to bio_init to optimize the assignment. A NULL block_device
can be passed, both for the passthrough case on a raw request_queue and
to temporarily avoid refactoring some nasty code.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Link: https://lore.kernel.org/r/20220124091107.642561-19-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Returns EAGAIN in case the raid456 driver would block waiting for reshape.
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Vishal Verma <vverma@digitalocean.com>
Signed-off-by: Song Liu <song@kernel.org>
raid_run_ops() relies on the implicitly disabled preemption for
its percpu ops, although this is really about CPU locality. This
breaks RT semantics as it can take regular (and thus sleeping)
spinlocks, such as stripe_lock.
Add a local_lock such that non-RT does not change and continues
to be just map to preempt_disable/enable, but makes RT happy as
the region will use a per-CPU spinlock and thus be preemptible
and still guarantee CPU locality.
Signed-off-by: Davidlohr Bueso <dbueso@suse.de>
Signed-off-by: Song Liu <songliubraving@fb.com>
Actually, mddev is not used by md_new_event.
Signed-off-by: Guoqing Jiang <guoqing.jiang@linux.dev>
Signed-off-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Let's call roundup_pow_of_two here instead of open code.
Signed-off-by: Guoqing Jiang <guoqing.jiang@linux.dev>
Signed-off-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The functions get_online_cpus() and put_online_cpus() have been
deprecated during the CPU hotplug rework. They map directly to
cpus_read_lock() and cpus_read_unlock().
Replace deprecated CPU-hotplug functions with the official version.
The behavior remains unchanged.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20210803141621.780504-16-bigeasy@linutronix.de
-----BEGIN PGP SIGNATURE-----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=D6dS
-----END PGP SIGNATURE-----
Merge tag 'for-5.14/drivers-2021-06-29' of git://git.kernel.dk/linux-block
Pull block driver updates from Jens Axboe:
"Pretty calm round, mostly just NVMe and a bit of MD:
- NVMe updates (via Christoph)
- improve the APST configuration algorithm (Alexey Bogoslavsky)
- look for StorageD3Enable on companion ACPI device
(Mario Limonciello)
- allow selecting the network interface for TCP connections
(Martin Belanger)
- misc cleanups (Amit Engel, Chaitanya Kulkarni, Colin Ian King,
Christoph)
- move the ACPI StorageD3 code to drivers/acpi/ and add quirks
for certain AMD CPUs (Mario Limonciello)
- zoned device support for nvmet (Chaitanya Kulkarni)
- fix the rules for changing the serial number in nvmet
(Noam Gottlieb)
- various small fixes and cleanups (Dan Carpenter, JK Kim,
Chaitanya Kulkarni, Hannes Reinecke, Wesley Sheng, Geert
Uytterhoeven, Daniel Wagner)
- MD updates (Via Song)
- iostats rewrite (Guoqing Jiang)
- raid5 lock contention optimization (Gal Ofri)
- Fall through warning fix (Gustavo)
- Misc fixes (Gustavo, Jiapeng)"
* tag 'for-5.14/drivers-2021-06-29' of git://git.kernel.dk/linux-block: (78 commits)
nvmet: use NVMET_MAX_NAMESPACES to set nn value
loop: Fix missing discard support when using LOOP_CONFIGURE
nvme.h: add missing nvme_lba_range_type endianness annotations
nvme: remove zeroout memset call for struct
nvme-pci: remove zeroout memset call for struct
nvmet: remove zeroout memset call for struct
nvmet: add ZBD over ZNS backend support
nvmet: add Command Set Identifier support
nvmet: add nvmet_req_bio put helper for backends
nvmet: add req cns error complete helper
block: export blk_next_bio()
nvmet: remove local variable
nvmet: use nvme status value directly
nvmet: use u32 type for the local variable nsid
nvmet: use u32 for nvmet_subsys max_nsid
nvmet: use req->cmd directly in file-ns fast path
nvmet: use req->cmd directly in bdev-ns fast path
nvmet: make ver stable once connection established
nvmet: allow mn change if subsys not discovered
nvmet: make sn stable once connection was established
...
