IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
This effectively changes collection_is_mt from
contact ID in report->field
to
(device is Win8 => collection is finger) && contact ID in report->field
Some devices erroneously report Pen for fingers, and Win8 stylus-on-touchscreen
devices report contact ID, but mark the accompanying touchscreen device's
collection correctly
Cc: stable@vger.kernel.org
Signed-off-by: Ahelenia Ziemiańska <nabijaczleweli@nabijaczleweli.xyz>
Acked-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
USB_VENDOR_ID_CORSAIR is defined twice in the same file with the same
value.
Signed-off-by: Hamza Mahfooz <someguy@effective-light.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The Lenovo optical mouse with vendor id of 0x17ef and product id of
0x600e experiences disconnecting issues every 55 seconds:
[38565.706242] usb 1-1.4: Product: Lenovo Optical Mouse
[38565.728603] input: Lenovo Optical Mouse as /devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.4/1-1.4:1.0/0003:17EF:600E.029A/input/input665
[38565.755949] hid-generic 0003:17EF:600E.029A: input,hidraw1: USB HID v1.11 Mouse [Lenovo Optical Mouse] on usb-0000:01:00.0-1.4/input0
[38619.360692] usb 1-1.4: USB disconnect, device number 48
[38620.864990] usb 1-1.4: new low-speed USB device number 49 using xhci_hcd
[38620.984011] usb 1-1.4: New USB device found, idVendor=17ef,idProduct=600e, bcdDevice= 1.00
[38620.998117] usb 1-1.4: New USB device strings: Mfr=0, Product=2,SerialNumber=0
This adds HID_QUIRK_ALWAYS_POLL for this device in order to work properly.
Signed-off-by: Saeed Mirzamohammadi <saeed.mirzamohammadi@oracle.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The G713 and G733 both emit an unexpected keycode on some key
presses such as Fn+Pause. The device in this case is emitting
two events on key down, and 3 on key up, the third key up event
is report ID 0x02 and is unfiltered, causing incorrect event.
This patch filters out the single problematic event.
Signed-off-by: Luke D Jones <luke@ljones.dev>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
In the function sensor_hub_set_feature(), return error when hid_set_field()
fails.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The SMbus block transaction limits the number of bytes transferred to 32,
but nothing prevents a user from specifying via ioctl a larger data size
than the ft260 can handle in a single transfer.
i2cdev_ioctl_smbus()
--> i2c_smbus_xfer
--> __i2c_smbus_xfer
--> ft260_smbus_xfer
--> ft260_smbus_write
This patch adds data size checking in the ft260_smbus_write().
Fixes: 98189a0adfa0 ("HID: ft260: add usb hid to i2c host bridge driver")
Signed-off-by: Michael Zaidman <michael.zaidman@gmail.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
We want to convert from 16 bit (unsigned) little endian values contained
in a packed struct to CPU native endian values here, not the other way
around. So replace cpu_to_le16() with get_unaligned_le16(), using the
latter instead of le16_to_cpu() to acknowledge that we are reading from
a packed struct.
Reported-by: kernel test robot <lkp@intel.com>
Fixes: b05ff1002a5c ("HID: Add support for Surface Aggregator Module HID transport")
Signed-off-by: Maximilian Luz <luzmaximilian@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
HUTRR101 added a new usage code for a key that is supposed to invoke and
dismiss an emoji picker widget to assist users to locate and enter emojis.
This patch adds a new key definition KEY_EMOJI_PICKER and maps 0x0c/0x0d9
usage code to this new keycode. Additionally hid-debug is adjusted to
recognize this new usage code as well.
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
This mouse has a horizontal wheel that requires special handling.
Without this patch, the horizontal wheel acts like a vertical wheel.
In the output of `hidrd-convert` for this mouse, there is a
`Usage (B8h)` field. It corresponds to a byte in packets sent by the
device that specifies which wheel generated an input event.
The name "A4TECH" is spelled in all capitals on the company website.
Signed-off-by: Mateusz Jończyk <mat.jonczyk@o2.pl>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Just like the K12A the Dell K15A keyboard-dock has problems with
get_feature requests. This sometimes leads to several
"failed to fetch feature 8" messages getting logged, after which the
touchpad may or may not work.
Just like the K15A these errors are triggered by undocking and docking
the tablet.
There also seem to be other problems when undocking and then docking again
in quick succession. It seems that in this case the keyboard-controller
still retains some power from capacitors and does not go through a
power-on-reset leaving it in a confuses state, symptoms of this are:
1. The USB-ids changing to 048d:8910
2. Failure to read the HID descriptors on the second (mouse) USB intf.
3. The touchpad freezing after a while
These problems can all be cleared by undocking the keyboard and waiting
a full minute before redocking it. Unfortunately there is nothing we can
do about this in the kernel.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Fix the return value check which testing the wrong variable
in thrustmaster_probe().
Fixes: c49c33637802 ("HID: support for initialization of some Thrustmaster wheels")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The Saitek X65 joystick has a pair of axes that were used as mouse
pointer controls by the Windows driver. The corresponding usage page is
the Game Controls page, which is not recognized by the generic HID
driver, and therefore, both axes get mapped to ABS_MISC. The quirk makes
the second axis get mapped to ABS_MISC+1, and therefore made available
separately.
Signed-off-by: Nirenjan Krishnan <nirenjan@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Older ROG keyboards emit a similar stream of bytes to the new
N-Key keyboards and require filtering to prevent a lot of
unmapped key warnings showing. As all the ROG keyboards use
QUIRK_USE_KBD_BACKLIGHT this is now used to branch to filtering
in asus_raw_event.
Signed-off-by: Luke D Jones <luke@ljones.dev>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
A number of USB keyboards, using the Semitek firmware, are capable of
handling arbitrary N-key rollover, but due to a buggy report
descriptor, keys beyond the sixth cannot be detected by the generic
HID driver.
There are numerous hardware variants sold by several vendors, mostly
using generic names like "GK61" for the 61-key version. These
keyboards are sometimes known collectively as the "GK6X" series.
The keyboard has three USB interfaces. Interface 0 uses the standard
HID boot protocol, limited to eight modifier keys and six normal keys;
interface 2 uses a custom report format that permits any number of
keys. If more than six keys are pressed simultaneously, the first six
are reported via interface 0 while subsequent keys are reported via
interface 2.
(Interface 1 uses a custom protocol for reprogramming the keyboard;
this can be controlled through userspace tools and is not of concern
for the present driver.)
The report descriptor for interface 2, however, is incorrect (for
report ID 0x04, the input field is marked as "array" rather than
"variable".) The descriptor appears to be correct in other respects,
so we simply replace the incorrect byte before parsing the descriptor.
Signed-off-by: Benjamin Moody <bmoody@member.fsf.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Only set the bits that are supported by the targeted devices.
This patch also removes duplicated set_bit calls.
Signed-off-by: Ping Cheng <ping.cheng@wacom.com>
Reviewed-by: Jason Gerecke <Jason.Gerecke@wacom.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Fixes the following W=1 kernel build warning(s):
drivers/hid/hid-sensor-hub.c:54: warning: Function parameter or member 'hsdev' not described in 'hid_sensor_hub_callbacks_list'
Cc: Jiri Kosina <jikos@kernel.org>
Cc: Jonathan Cameron <jic23@kernel.org>
Cc: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Cc: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Cc: linux-input@vger.kernel.org
Cc: linux-iio@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Commit b0f847e16c1ea ("HID: hid-sensor-hub: Force logical minimum to 1
for power and report state") removed the last used quirk handled by
this driver.
Fixes the following W=1 kernel build warning(s):
drivers/hid/hid-sensor-hub.c:39: warning: Function parameter or member 'quirks' not described in 'sensor_hub_data'
Cc: Jiri Kosina <jikos@kernel.org>
Cc: Jonathan Cameron <jic23@kernel.org>
Cc: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Cc: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Cc: linux-input@vger.kernel.org
Cc: linux-iio@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Fixes the following W=1 kernel build warning(s):
drivers/hid/wacom_sys.c:1505: warning: Function parameter or member 'wacom' not described in 'wacom_led_next'
drivers/hid/wacom_sys.c:1505: warning: Function parameter or member 'cur' not described in 'wacom_led_next'
Cc: Jiri Kosina <jikos@kernel.org>
Cc: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Cc: linux-input@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Fixes the following W=1 kernel build warning(s):
drivers/hid/hid-sensor-custom.c: In function ‘store_value’:
drivers/hid/hid-sensor-custom.c:400:7: warning: variable ‘ret’ set but not used [-Wunused-but-set-variable]
Cc: Jiri Kosina <jikos@kernel.org>
Cc: Jonathan Cameron <jic23@kernel.org>
Cc: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Cc: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Cc: linux-input@vger.kernel.org
Cc: linux-iio@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Fixes the following W=1 kernel build warning(s):
drivers/hid/hid-uclogic-params.c:33: warning: expecting prototype for Convert a pen in(). Prototype was for uclogic_params_pen_inrange_to_str() instead
drivers/hid/hid-uclogic-params.c:519: warning: wrong kernel-doc identifier on line:
drivers/hid/hid-uclogic-params.c:706: warning: expecting prototype for uclogic_params_init(). Prototype was for uclogic_params_huion_init() instead
Cc: Jiri Kosina <jikos@kernel.org>
Cc: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Cc: linux-input@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Fixes the following W=1 kernel build warning(s):
drivers/hid/hid-uclogic-rdesc.c:645: warning: wrong kernel-doc identifier on line:
Cc: Jiri Kosina <jikos@kernel.org>
Cc: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Cc: linux-input@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Fixes the following W=1 kernel build warning(s):
drivers/hid/hid-logitech-hidpp.c:275: warning: Function parameter or member 'hidpp' not described in 'hidpp_send_message_sync'
drivers/hid/hid-logitech-hidpp.c:275: warning: Function parameter or member 'message' not described in 'hidpp_send_message_sync'
drivers/hid/hid-logitech-hidpp.c:275: warning: Function parameter or member 'response' not described in 'hidpp_send_message_sync'
drivers/hid/hid-logitech-hidpp.c:275: warning: expecting prototype for and something else(). Prototype was for hidpp_send_message_sync() instead
drivers/hid/hid-logitech-hidpp.c:427: warning: wrong kernel-doc identifier on line:
drivers/hid/hid-logitech-hidpp.c:470: warning: Function parameter or member 'input_dev' not described in 'hidpp_scroll_counter_handle_scroll'
drivers/hid/hid-logitech-hidpp.c:1894: warning: Function parameter or member 'hidpp' not described in 'hidpp_touchpad_fw_items_set'
drivers/hid/hid-logitech-hidpp.c:1894: warning: Function parameter or member 'feature_index' not described in 'hidpp_touchpad_fw_items_set'
drivers/hid/hid-logitech-hidpp.c:1894: warning: Function parameter or member 'items' not described in 'hidpp_touchpad_fw_items_set'
drivers/hid/hid-logitech-hidpp.c:1894: warning: expecting prototype for send a set state command to the device by reading the current items(). Prototype was for hidpp_touchpad_fw_items_set() instead
Cc: Jiri Kosina <jikos@kernel.org>
Cc: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Cc: Henrik Rydberg <rydberg@bitmath.org>
Cc: Lopez Casado <nlopezcasad@logitech.com>
Cc: linux-input@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Fixes the following W=1 kernel build warning(s):
drivers/hid/hid-picolcd_core.c: In function ‘picolcd_raw_event’:
drivers/hid/hid-picolcd_core.c:332:6: warning: variable ‘ret’ set but not used [-Wunused-but-set-variable]
Cc: "Bruno Prémont" <bonbons@linux-vserver.org>
Cc: Jiri Kosina <jikos@kernel.org>
Cc: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Cc: "L. Vinyard, Jr" <rvinyard@cs.nmsu.edu>
Cc: linux-input@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Fixes the following W=1 kernel build warning(s):
drivers/hid/hid-kye.c:666: warning: expecting prototype for Enable fully(). Prototype was for kye_tablet_enable() instead
Cc: Jiri Kosina <jikos@kernel.org>
Cc: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Cc: linux-input@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Fixes the following W=1 kernel build warning(s):
drivers/hid/hid-core.c:2142: warning: expecting prototype for store_new_id(). Prototype was for new_id_store() instead
Cc: Jiri Kosina <jikos@kernel.org>
Cc: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Cc: Vojtech Pavlik <vojtech@suse.cz>
Cc: Michael Haboustak <mike-@cinci.rr.com>
Cc: linux-input@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Fixes the following W=1 kernel build warning(s):
drivers/hid/hid-alps.c:113: warning: expecting prototype for struct u1_data. Prototype was for struct alps_dev instead
Cc: Jiri Kosina <jikos@kernel.org>
Cc: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Cc: Henrik Rydberg <rydberg@bitmath.org>
Cc: Masaki Ota <masaki.ota@jp.alps.com>
Cc: linux-input@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Fixes the following W=1 kernel build warning(s):
drivers/hid/usbhid/hid-pidff.c:512: warning: Function parameter or member 'dev' not described in 'pidff_playback'
drivers/hid/usbhid/hid-pidff.c:512: warning: Function parameter or member 'effect_id' not described in 'pidff_playback'
drivers/hid/usbhid/hid-pidff.c:512: warning: Function parameter or member 'value' not described in 'pidff_playback'
drivers/hid/usbhid/hid-pidff.c:512: warning: expecting prototype for value times(). Prototype was for pidff_playback() instead
drivers/hid/usbhid/hid-pidff.c:1005: warning: Function parameter or member 'pidff' not described in 'pidff_find_effects'
drivers/hid/usbhid/hid-pidff.c:1005: warning: Function parameter or member 'dev' not described in 'pidff_find_effects'
drivers/hid/usbhid/hid-pidff.c:1005: warning: expecting prototype for Find the implemented effect types(). Prototype was for pidff_find_effects() instead
Cc: Jiri Kosina <jikos@kernel.org>
Cc: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Cc: Anssi Hannula <anssi.hannula@gmail.com>
Cc: linux-usb@vger.kernel.org
Cc: linux-input@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Fixes the following W=1 kernel build warning(s):
drivers/hid/usbhid/usbkbd.c:66: warning: bad line: should be on
Cc: Jiri Kosina <jikos@kernel.org>
Cc: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Cc: message to <vojtech@ucw.cz>
Cc: linux-usb@vger.kernel.org
Cc: linux-input@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Fixes the following W=1 kernel build warning(s):
drivers/hid/hid-thrustmaster.c:23: warning: Incorrect use of kernel-doc format: * These interrupts are used to prevent a nasty crash when initializing the
drivers/hid/hid-thrustmaster.c:26: warning: cannot understand function prototype: 'const u8 setup_0[] = '
drivers/hid/hid-thrustmaster.c:49: warning: cannot understand function prototype: 'struct tm_wheel_info '
drivers/hid/hid-thrustmaster.c:62: warning: wrong kernel-doc identifier on line:
drivers/hid/hid-thrustmaster.c:84: warning: cannot understand function prototype: 'struct __packed tm_wheel_response '
drivers/hid/hid-thrustmaster.c:143: warning: wrong kernel-doc identifier on line:
drivers/hid/hid-thrustmaster.c:202: warning: Function parameter or member 'urb' not described in 'thrustmaster_model_handler'
drivers/hid/hid-thrustmaster.c:202: warning: expecting prototype for Called by the USB subsystem when the wheel responses to our request(). Prototype was for thrustmaster_model_handler() instead
drivers/hid/hid-thrustmaster.c:265: warning: wrong kernel-doc identifier on line:
Cc: Jiri Kosina <jikos@kernel.org>
Cc: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com>
Cc: Alexandre Torgue <alexandre.torgue@foss.st.com>
Cc: Dario Pagani <dario.pagani.146+linuxk@gmail.com>
Cc: Kim Kuparinen <kimi.h.kuparinen@gmail.com>
Cc: linux-input@vger.kernel.org
Cc: linux-stm32@st-md-mailman.stormreply.com
Cc: linux-arm-kernel@lists.infradead.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
This is the capacity in percentage, relative to design capacity.
Specifically, it is present in Apple Magic Mouse 2.
In contrast, usage 00850064 is also the capacity in percentage, but is
relative to full capacity. It is not mapped here because I don't have
such device.
Signed-off-by: John Chen <johnchen902@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
It is observed that the Magic Mouse 2 would not enter multi-touch mode
unless the mouse is connected before loading the module. It seems to be
a quirk specific to Magic Mouse 2
Retrying after 500ms fixes the problem for me. The delay can't be
reduced much further --- 300ms didn't work for me. Retrying immediately
after receiving an event didn't work either.
Signed-off-by: John Chen <johnchen902@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
It is observed that, with 3 button emulation, when middle button is
clicked, either the left button or right button is clicked as well. It
is caused by hidinput "correctly" acting on the event, oblivious to the
3 button emulation.
As raw_event has taken care of everything, no further processing is
needed. However, the only way to stop at raw_event is to return an error
(negative) value. Therefore, the processing is stopped at event instead.
[jkosina@suse.cz: fix comment style]
Signed-off-by: John Chen <johnchen902@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The Thinkpad X1 Tablet Thin keyboard's HID interface for the media-keys
and other special functions, is quite similar to the Thinkpad 10 ultrabook
keyboard's mouse/media-keys HID interface.
The only difference is that it needs a bit different key mappings.
Add support for the mute-LED and the non-standard media-keys on this
keyboard by re-using the tp10_ultrabook_kbd code combined with a new
lenovo_input_mapping_x1_tab_kbd() function.
Co-authored-by: Alexander Kobel <a-kobel@a-kobel.de>
Tested-by: Alexander Kobel <a-kobel@a-kobel.de>
Signed-off-by: Alexander Kobel <a-kobel@a-kobel.de>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Instead of looking for a hdev with a type of HID_TYPE_USBMOUSE find
the interface for the mute/mic-mute/fn-lock LEDs by checking for the
output-report which is used to set them.
This is a preparation patch for adding support for the LEDs on the
X1 tablet thin keyboard which uses the same output-report, but has
a separate (third) USB interface for the touchpad/mouse functionality.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The mute and mic-mute LEDs should be automatically turned on/off based
on the audio-card's mixer settings.
Add the standardized default-trigger names for this, so that the alsa
code can turn the LEDs on/off as appropriate (on supported audio cards).
This brings the mute/mic-mute LED support inline with the thinkpad_acpi
support for the same LEDs in keyboards directly connected to the
laptop's embedded-controller.
Reviewed-by: Marek Behún <kabel@kernel.org>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Mapping the mic-mute button to KEY_MICMUTE is technically correct but
KEY_MICMUTE translates to a scancode of 256 (248 + 8) under X,
which does not fit in 8 bits, so it does not work.
Because of this userspace is expecting KEY_F20 instead,
theoretically KEY_MICMUTE should work under Wayland but even
there it does not work, because the desktop-environment is
listening only for KEY_F20 and not for KEY_MICMUTE.
Fixes: bc04b37ea0ec ("HID: lenovo: Add ThinkPad 10 Ultrabook Keyboard support")
Reviewed-by: Marek Behún <kabel@kernel.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
