a29b3ca17e
36811 Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
Andrey Ignatov
|
d7af7e497f |
bpf: Fix possible out of bound write in narrow load handling
Fix a verifier bug found by smatch static checker in [0].
This problem has never been seen in prod to my best knowledge. Fixing it
still seems to be a good idea since it's hard to say for sure whether
it's possible or not to have a scenario where a combination of
convert_ctx_access() and a narrow load would lead to an out of bound
write.
When narrow load is handled, one or two new instructions are added to
insn_buf array, but before it was only checked that
cnt >= ARRAY_SIZE(insn_buf)
And it's safe to add a new instruction to insn_buf[cnt++] only once. The
second try will lead to out of bound write. And this is what can happen
if `shift` is set.
Fix it by making sure that if the BPF_RSH instruction has to be added in
addition to BPF_AND then there is enough space for two more instructions
in insn_buf.
The full report [0] is below:
kernel/bpf/verifier.c:12304 convert_ctx_accesses() warn: offset 'cnt' incremented past end of array
kernel/bpf/verifier.c:12311 convert_ctx_accesses() warn: offset 'cnt' incremented past end of array
kernel/bpf/verifier.c
12282
12283 insn->off = off & ~(size_default - 1);
12284 insn->code = BPF_LDX | BPF_MEM | size_code;
12285 }
12286
12287 target_size = 0;
12288 cnt = convert_ctx_access(type, insn, insn_buf, env->prog,
12289 &target_size);
12290 if (cnt == 0 || cnt >= ARRAY_SIZE(insn_buf) ||
^^^^^^^^^^^^^^^^^^^^^^^^^^^
Bounds check.
12291 (ctx_field_size && !target_size)) {
12292 verbose(env, "bpf verifier is misconfigured\n");
12293 return -EINVAL;
12294 }
12295
12296 if (is_narrower_load && size < target_size) {
12297 u8 shift = bpf_ctx_narrow_access_offset(
12298 off, size, size_default) * 8;
12299 if (ctx_field_size <= 4) {
12300 if (shift)
12301 insn_buf[cnt++] = BPF_ALU32_IMM(BPF_RSH,
^^^^^
increment beyond end of array
12302 insn->dst_reg,
12303 shift);
--> 12304 insn_buf[cnt++] = BPF_ALU32_IMM(BPF_AND, insn->dst_reg,
^^^^^
out of bounds write
12305 (1 << size * 8) - 1);
12306 } else {
12307 if (shift)
12308 insn_buf[cnt++] = BPF_ALU64_IMM(BPF_RSH,
12309 insn->dst_reg,
12310 shift);
12311 insn_buf[cnt++] = BPF_ALU64_IMM(BPF_AND, insn->dst_reg,
^^^^^^^^^^^^^^^
Same.
12312 (1ULL << size * 8) - 1);
12313 }
12314 }
12315
12316 new_prog = bpf_patch_insn_data(env, i + delta, insn_buf, cnt);
12317 if (!new_prog)
12318 return -ENOMEM;
12319
12320 delta += cnt - 1;
12321
12322 /* keep walking new program and skip insns we just inserted */
12323 env->prog = new_prog;
12324 insn = new_prog->insnsi + i + delta;
12325 }
12326
12327 return 0;
12328 }
[0] https://lore.kernel.org/bpf/20210817050843.GA21456@kili/
v1->v2:
- clarify that problem was only seen by static checker but not in prod;
Fixes:
|
||
Dave Marchevsky
|
6fc88c354f |
bpf: Migrate cgroup_bpf to internal cgroup_bpf_attach_type enum
Add an enum (cgroup_bpf_attach_type) containing only valid cgroup_bpf attach types and a function to map bpf_attach_type values to the new enum. Inspired by netns_bpf_attach_type. Then, migrate cgroup_bpf to use cgroup_bpf_attach_type wherever possible. Functionality is unchanged as attach_type_to_prog_type switches in bpf/syscall.c were preventing non-cgroup programs from making use of the invalid cgroup_bpf array slots. As a result struct cgroup_bpf uses 504 fewer bytes relative to when its arrays were sized using MAX_BPF_ATTACH_TYPE. bpf_cgroup_storage is notably not migrated as struct bpf_cgroup_storage_key is part of uapi and contains a bpf_attach_type member which is not meant to be opaque. Similarly, bpf_cgroup_link continues to report its bpf_attach_type member to userspace via fdinfo and bpf_link_info. To ease disambiguation, bpf_attach_type variables are renamed from 'type' to 'atype' when changed to cgroup_bpf_attach_type. Signed-off-by: Dave Marchevsky <davemarchevsky@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20210819092420.1984861-2-davemarchevsky@fb.com |
||
Prankur Gupta
|
2c531639de |
bpf: Add support for {set|get} socket options from setsockopt BPF
Add logic to call bpf_setsockopt() and bpf_getsockopt() from setsockopt BPF programs. An example use case is when the user sets the IPV6_TCLASS socket option, we would also like to change the tcp-cc for that socket. We don't have any use case for calling bpf_setsockopt() from supposedly read- only sys_getsockopt(), so it is made available to BPF_CGROUP_SETSOCKOPT only at this point. Signed-off-by: Prankur Gupta <prankgup@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Song Liu <songliubraving@fb.com> Link: https://lore.kernel.org/bpf/20210817224221.3257826-2-prankgup@fb.com |
||
Stanislav Fomichev
|
44779a4b85 |
bpf: Use kvmalloc for map keys in syscalls
Same as previous patch but for the keys. memdup_bpfptr is renamed to kvmemdup_bpfptr (and converted to kvmalloc). Signed-off-by: Stanislav Fomichev <sdf@google.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Song Liu <songliubraving@fb.com> Link: https://lore.kernel.org/bpf/20210818235216.1159202-2-sdf@google.com |
||
|
Stanislav Fomichev
|
f0dce1d9b7 |
bpf: Use kvmalloc for map values in syscall
Use kvmalloc/kvfree for temporary value when manipulating a map via syscall. kmalloc might not be sufficient for percpu maps where the value is big (and further multiplied by hundreds of CPUs). Can be reproduced with netcnt test on qemu with "-smp 255". Signed-off-by: Stanislav Fomichev <sdf@google.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Song Liu <songliubraving@fb.com> Link: https://lore.kernel.org/bpf/20210818235216.1159202-1-sdf@google.com |
||
Yonghong Song
|
594286b757 |
bpf: Fix NULL event->prog pointer access in bpf_overflow_handler
Andrii reported that libbpf CI hit the following oops when running selftest send_signal: [ 1243.160719] BUG: kernel NULL pointer dereference, address: 0000000000000030 [ 1243.161066] #PF: supervisor read access in kernel mode [ 1243.161066] #PF: error_code(0x0000) - not-present page [ 1243.161066] PGD 0 P4D 0 [ 1243.161066] Oops: 0000 [#1] PREEMPT SMP NOPTI [ 1243.161066] CPU: 1 PID: 882 Comm: new_name Tainted: G O 5.14.0-rc5 #1 [ 1243.161066] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-1ubuntu1.1 04/01/2014 [ 1243.161066] RIP: 0010:bpf_overflow_handler+0x9a/0x1e0 [ 1243.161066] Code: 5a 84 c0 0f 84 06 01 00 00 be 66 02 00 00 48 c7 c7 6d 96 07 82 48 8b ab 18 05 00 00 e8 df 55 eb ff 66 90 48 8d 75 48 48 89 e7 <ff> 55 30 41 89 c4 e8 fb c1 f0 ff 84 c0 0f 84 94 00 00 00 e8 6e 0f [ 1243.161066] RSP: 0018:ffffc900000c0d80 EFLAGS: 00000046 [ 1243.161066] RAX: 0000000000000002 RBX: ffff8881002e0dd0 RCX: 00000000b4b47cf8 [ 1243.161066] RDX: ffffffff811dcb06 RSI: 0000000000000048 RDI: ffffc900000c0d80 [ 1243.161066] RBP: 0000000000000000 R08: 0000000000000000 R09: 1a9d56bb00000000 [ 1243.161066] R10: 0000000000000001 R11: 0000000000080000 R12: 0000000000000000 [ 1243.161066] R13: ffffc900000c0e00 R14: ffffc900001c3c68 R15: 0000000000000082 [ 1243.161066] FS: 00007fc0be2d3380(0000) GS:ffff88813bd00000(0000) knlGS:0000000000000000 [ 1243.161066] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 1243.161066] CR2: 0000000000000030 CR3: 0000000104f8e000 CR4: 00000000000006e0 [ 1243.161066] Call Trace: [ 1243.161066] <IRQ> [ 1243.161066] __perf_event_overflow+0x4f/0xf0 [ 1243.161066] perf_swevent_hrtimer+0x116/0x130 [ 1243.161066] ? __lock_acquire+0x378/0x2730 [ 1243.161066] ? __lock_acquire+0x372/0x2730 [ 1243.161066] ? lock_is_held_type+0xd5/0x130 [ 1243.161066] ? find_held_lock+0x2b/0x80 [ 1243.161066] ? lock_is_held_type+0xd5/0x130 [ 1243.161066] ? perf_event_groups_first+0x80/0x80 [ 1243.161066] ? perf_event_groups_first+0x80/0x80 [ 1243.161066] __hrtimer_run_queues+0x1a3/0x460 [ 1243.161066] hrtimer_interrupt+0x110/0x220 [ 1243.161066] __sysvec_apic_timer_interrupt+0x8a/0x260 [ 1243.161066] sysvec_apic_timer_interrupt+0x89/0xc0 [ 1243.161066] </IRQ> [ 1243.161066] asm_sysvec_apic_timer_interrupt+0x12/0x20 [ 1243.161066] RIP: 0010:finish_task_switch+0xaf/0x250 [ 1243.161066] Code: 31 f6 68 90 2a 09 81 49 8d 7c 24 18 e8 aa d6 03 00 4c 89 e7 e8 12 ff ff ff 4c 89 e7 e8 ca 9c 80 00 e8 35 af 0d 00 fb 4d 85 f6 <58> 74 1d 65 48 8b 04 25 c0 6d 01 00 4c 3b b0 a0 04 00 00 74 37 f0 [ 1243.161066] RSP: 0018:ffffc900001c3d18 EFLAGS: 00000282 [ 1243.161066] RAX: 000000000000031f RBX: ffff888104cf4980 RCX: 0000000000000000 [ 1243.161066] RDX: 0000000000000000 RSI: ffffffff82095460 RDI: ffffffff820adc4e [ 1243.161066] RBP: ffffc900001c3d58 R08: 0000000000000001 R09: 0000000000000001 [ 1243.161066] R10: 0000000000000001 R11: 0000000000080000 R12: ffff88813bd2bc80 [ 1243.161066] R13: ffff8881002e8000 R14: ffff88810022ad80 R15: 0000000000000000 [ 1243.161066] ? finish_task_switch+0xab/0x250 [ 1243.161066] ? finish_task_switch+0x70/0x250 [ 1243.161066] __schedule+0x36b/0xbb0 [ 1243.161066] ? _raw_spin_unlock_irqrestore+0x2d/0x50 [ 1243.161066] ? lockdep_hardirqs_on+0x79/0x100 [ 1243.161066] schedule+0x43/0xe0 [ 1243.161066] pipe_read+0x30b/0x450 [ 1243.161066] ? wait_woken+0x80/0x80 [ 1243.161066] new_sync_read+0x164/0x170 [ 1243.161066] vfs_read+0x122/0x1b0 [ 1243.161066] ksys_read+0x93/0xd0 [ 1243.161066] do_syscall_64+0x35/0x80 [ 1243.161066] entry_SYSCALL_64_after_hwframe+0x44/0xae The oops can also be reproduced with the following steps: ./vmtest.sh -s # at qemu shell cd /root/bpf && while true; do ./test_progs -t send_signal Further analysis showed that the failure is introduced with commit |
||
Daniel Borkmann
|
f9dabe016b |
bpf: Undo off-by-one in interpreter tail call count limit
The BPF interpreter as well as x86-64 BPF JIT were both in line by allowing up to 33 tail calls (however odd that number may be!). Recently, this was changed for the interpreter to reduce it down to 32 with the assumption that this should have been the actual limit "which is in line with the behavior of the x86 JITs" according to |
||
Colin Ian King
|
8cacfc85b6 |
bpf: Remove redundant initialization of variable allow
The variable allow is being initialized with a value that is never read, it
is being updated later on. The assignment is redundant and can be removed.
Addresses-Coverity: ("Unused value")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210817170842.495440-1-colin.king@canonical.com
|
||
Andrii Nakryiko
|
7adfc6c9b3 |
bpf: Add bpf_get_attach_cookie() BPF helper to access bpf_cookie value
Add new BPF helper, bpf_get_attach_cookie(), which can be used by BPF programs
to get access to a user-provided bpf_cookie value, specified during BPF
program attachment (BPF link creation) time.
Naming is hard, though. With the concept being named "BPF cookie", I've
considered calling the helper:
- bpf_get_cookie() -- seems too unspecific and easily mistaken with socket
cookie;
- bpf_get_bpf_cookie() -- too much tautology;
- bpf_get_link_cookie() -- would be ok, but while we create a BPF link to
attach BPF program to BPF hook, it's still an "attachment" and the
bpf_cookie is associated with BPF program attachment to a hook, not a BPF
link itself. Technically, we could support bpf_cookie with old-style
cgroup programs.So I ultimately rejected it in favor of
bpf_get_attach_cookie().
Currently all perf_event-backed BPF program types support
bpf_get_attach_cookie() helper. Follow-up patches will add support for
fentry/fexit programs as well.
While at it, mark bpf_tracing_func_proto() as static to make it obvious that
it's only used from within the kernel/trace/bpf_trace.c.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20210815070609.987780-7-andrii@kernel.org
|
||
|
Andrii Nakryiko
|
82e6b1eee6 |
bpf: Allow to specify user-provided bpf_cookie for BPF perf links
Add ability for users to specify custom u64 value (bpf_cookie) when creating BPF link for perf_event-backed BPF programs (kprobe/uprobe, perf_event, tracepoints). This is useful for cases when the same BPF program is used for attaching and processing invocation of different tracepoints/kprobes/uprobes in a generic fashion, but such that each invocation is distinguished from each other (e.g., BPF program can look up additional information associated with a specific kernel function without having to rely on function IP lookups). This enables new use cases to be implemented simply and efficiently that previously were possible only through code generation (and thus multiple instances of almost identical BPF program) or compilation at runtime (BCC-style) on target hosts (even more expensive resource-wise). For uprobes it is not even possible in some cases to know function IP before hand (e.g., when attaching to shared library without PID filtering, in which case base load address is not known for a library). This is done by storing u64 bpf_cookie in struct bpf_prog_array_item, corresponding to each attached and run BPF program. Given cgroup BPF programs already use two 8-byte pointers for their needs and cgroup BPF programs don't have (yet?) support for bpf_cookie, reuse that space through union of cgroup_storage and new bpf_cookie field. Make it available to kprobe/tracepoint BPF programs through bpf_trace_run_ctx. This is set by BPF_PROG_RUN_ARRAY, used by kprobe/uprobe/tracepoint BPF program execution code, which luckily is now also split from BPF_PROG_RUN_ARRAY_CG. This run context will be utilized by a new BPF helper giving access to this user-provided cookie value from inside a BPF program. Generic perf_event BPF programs will access this value from perf_event itself through passed in BPF program context. Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Yonghong Song <yhs@fb.com> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lore.kernel.org/bpf/20210815070609.987780-6-andrii@kernel.org |
||
|
Andrii Nakryiko
|
b89fbfbb85 |
bpf: Implement minimal BPF perf link
Introduce a new type of BPF link - BPF perf link. This brings perf_event-based BPF program attachments (perf_event, tracepoints, kprobes, and uprobes) into the common BPF link infrastructure, allowing to list all active perf_event based attachments, auto-detaching BPF program from perf_event when link's FD is closed, get generic BPF link fdinfo/get_info functionality. BPF_LINK_CREATE command expects perf_event's FD as target_fd. No extra flags are currently supported. Force-detaching and atomic BPF program updates are not yet implemented, but with perf_event-based BPF links we now have common framework for this without the need to extend ioctl()-based perf_event interface. One interesting consideration is a new value for bpf_attach_type, which BPF_LINK_CREATE command expects. Generally, it's either 1-to-1 mapping from bpf_attach_type to bpf_prog_type, or many-to-1 mapping from a subset of bpf_attach_types to one bpf_prog_type (e.g., see BPF_PROG_TYPE_SK_SKB or BPF_PROG_TYPE_CGROUP_SOCK). In this case, though, we have three different program types (KPROBE, TRACEPOINT, PERF_EVENT) using the same perf_event-based mechanism, so it's many bpf_prog_types to one bpf_attach_type. I chose to define a single BPF_PERF_EVENT attach type for all of them and adjust link_create()'s logic for checking correspondence between attach type and program type. The alternative would be to define three new attach types (e.g., BPF_KPROBE, BPF_TRACEPOINT, and BPF_PERF_EVENT), but that seemed like unnecessary overkill and BPF_KPROBE will cause naming conflicts with BPF_KPROBE() macro, defined by libbpf. I chose to not do this to avoid unnecessary proliferation of bpf_attach_type enum values and not have to deal with naming conflicts. Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Yonghong Song <yhs@fb.com> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lore.kernel.org/bpf/20210815070609.987780-5-andrii@kernel.org |
||
|
Andrii Nakryiko
|
652c1b17b8 |
bpf: Refactor perf_event_set_bpf_prog() to use struct bpf_prog input
Make internal perf_event_set_bpf_prog() use struct bpf_prog pointer as an input argument, which makes it easier to re-use for other internal uses (coming up for BPF link in the next patch). BPF program FD is not as convenient and in some cases it's not available. So switch to struct bpf_prog, move out refcounting outside and let caller do bpf_prog_put() in case of an error. This follows the approach of most of the other BPF internal functions. Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Yonghong Song <yhs@fb.com> Link: https://lore.kernel.org/bpf/20210815070609.987780-4-andrii@kernel.org |
||
|
Andrii Nakryiko
|
7d08c2c911 |
bpf: Refactor BPF_PROG_RUN_ARRAY family of macros into functions
Similar to BPF_PROG_RUN, turn BPF_PROG_RUN_ARRAY macros into proper functions with all the same readability and maintainability benefits. Making them into functions required shuffling around bpf_set_run_ctx/bpf_reset_run_ctx functions. Also, explicitly specifying the type of the BPF prog run callback required adjusting __bpf_prog_run_save_cb() to accept const void *, casted internally to const struct sk_buff. Further, split out a cgroup-specific BPF_PROG_RUN_ARRAY_CG and BPF_PROG_RUN_ARRAY_CG_FLAGS from the more generic BPF_PROG_RUN_ARRAY due to the differences in bpf_run_ctx used for those two different use cases. I think BPF_PROG_RUN_ARRAY_CG would benefit from further refactoring to accept struct cgroup and enum bpf_attach_type instead of bpf_prog_array, fetching cgrp->bpf.effective[type] and RCU-dereferencing it internally. But that required including include/linux/cgroup-defs.h, which I wasn't sure is ok with everyone. The remaining generic BPF_PROG_RUN_ARRAY function will be extended to pass-through user-provided context value in the next patch. Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Yonghong Song <yhs@fb.com> Link: https://lore.kernel.org/bpf/20210815070609.987780-3-andrii@kernel.org |
||
|
Andrii Nakryiko
|
fb7dd8bca0 |
bpf: Refactor BPF_PROG_RUN into a function
Turn BPF_PROG_RUN into a proper always inlined function. No functional and performance changes are intended, but it makes it much easier to understand what's going on with how BPF programs are actually get executed. It's more obvious what types and callbacks are expected. Also extra () around input parameters can be dropped, as well as `__` variable prefixes intended to avoid naming collisions, which makes the code simpler to read and write. This refactoring also highlighted one extra issue. BPF_PROG_RUN is both a macro and an enum value (BPF_PROG_RUN == BPF_PROG_TEST_RUN). Turning BPF_PROG_RUN into a function causes naming conflict compilation error. So rename BPF_PROG_RUN into lower-case bpf_prog_run(), similar to bpf_prog_run_xdp(), bpf_prog_run_pin_on_cpu(), etc. All existing callers of BPF_PROG_RUN, the macro, are switched to bpf_prog_run() explicitly. Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Yonghong Song <yhs@fb.com> Link: https://lore.kernel.org/bpf/20210815070609.987780-2-andrii@kernel.org |
||
Kuniyuki Iwashima
|
3478cfcfcd |
bpf: Support "%c" in bpf_bprintf_prepare().
/proc/net/unix uses "%c" to print a single-byte character to escape '\0' in
the name of the abstract UNIX domain socket. The following selftest uses
it, so this patch adds support for "%c". Note that it does not support
wide character ("%lc" and "%llc") for simplicity.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.co.jp>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20210814015718.42704-3-kuniyu@amazon.co.jp
|
||
|
Stanislav Fomichev
|
f1248dee95 |
bpf: Allow bpf_get_netns_cookie in BPF_PROG_TYPE_CGROUP_SOCKOPT
This is similar to existing BPF_PROG_TYPE_CGROUP_SOCK and BPF_PROG_TYPE_CGROUP_SOCK_ADDR. Signed-off-by: Stanislav Fomichev <sdf@google.com> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Acked-by: Martin KaFai Lau <kafai@fb.com> Link: https://lore.kernel.org/bpf/20210813230530.333779-2-sdf@google.com |
||
Jakub Kicinski
|
f4083a752a |
Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Conflicts: drivers/net/ethernet/broadcom/bnxt/bnxt_ptp.h |
||
Linus Torvalds
|
f8e6dfc64f |
Networking fixes for 5.14-rc6, including fixes from netfilter, bpf,
can and ieee802154.
Current release - regressions:
- r8169: fix ASPM-related link-up regressions
- bridge: fix flags interpretation for extern learn fdb entries
- phy: micrel: fix link detection on ksz87xx switch
- Revert "tipc: Return the correct errno code"
- ptp: fix possible memory leak caused by invalid cast
Current release - new code bugs:
- bpf: add missing bpf_read_[un]lock_trace() for syscall program
- bpf: fix potentially incorrect results with bpf_get_local_storage()
- page_pool: mask the page->signature before the checking, avoid
dma mapping leaks
- netfilter: nfnetlink_hook: 5 fixes to information in netlink dumps
- bnxt_en: fix firmware interface issues with PTP
- mlx5: Bridge, fix ageing time
Previous releases - regressions:
- linkwatch: fix failure to restore device state across suspend/resume
- bareudp: fix invalid read beyond skb's linear data
Previous releases - always broken:
- bpf: fix integer overflow involving bucket_size
- ppp: fix issues when desired interface name is specified via netlink
- wwan: mhi_wwan_ctrl: fix possible deadlock
- dsa: microchip: ksz8795: fix number of VLAN related bugs
- dsa: drivers: fix broken backpressure in .port_fdb_dump
- dsa: qca: ar9331: make proper initial port defaults
Misc:
- bpf: add lockdown check for probe_write_user helper
- netfilter: conntrack: remove offload_pickup sysctl before 5.14 is out
- netfilter: conntrack: collect all entries in one cycle,
heuristically slow down garbage collection scans
on idle systems to prevent frequent wake ups
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=hzDl
-----END PGP SIGNATURE-----
Merge tag 'net-5.14-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Networking fixes, including fixes from netfilter, bpf, can and
ieee802154.
The size of this is pretty normal, but we got more fixes for 5.14
changes this week than last week. Nothing major but the trend is the
opposite of what we like. We'll see how the next week goes..
Current release - regressions:
- r8169: fix ASPM-related link-up regressions
- bridge: fix flags interpretation for extern learn fdb entries
- phy: micrel: fix link detection on ksz87xx switch
- Revert "tipc: Return the correct errno code"
- ptp: fix possible memory leak caused by invalid cast
Current release - new code bugs:
- bpf: add missing bpf_read_[un]lock_trace() for syscall program
- bpf: fix potentially incorrect results with bpf_get_local_storage()
- page_pool: mask the page->signature before the checking, avoid dma
mapping leaks
- netfilter: nfnetlink_hook: 5 fixes to information in netlink dumps
- bnxt_en: fix firmware interface issues with PTP
- mlx5: Bridge, fix ageing time
Previous releases - regressions:
- linkwatch: fix failure to restore device state across
suspend/resume
- bareudp: fix invalid read beyond skb's linear data
Previous releases - always broken:
- bpf: fix integer overflow involving bucket_size
- ppp: fix issues when desired interface name is specified via
netlink
- wwan: mhi_wwan_ctrl: fix possible deadlock
- dsa: microchip: ksz8795: fix number of VLAN related bugs
- dsa: drivers: fix broken backpressure in .port_fdb_dump
- dsa: qca: ar9331: make proper initial port defaults
Misc:
- bpf: add lockdown check for probe_write_user helper
- netfilter: conntrack: remove offload_pickup sysctl before 5.14 is
out
- netfilter: conntrack: collect all entries in one cycle,
heuristically slow down garbage collection scans on idle systems to
prevent frequent wake ups"
* tag 'net-5.14-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (87 commits)
vsock/virtio: avoid potential deadlock when vsock device remove
wwan: core: Avoid returning NULL from wwan_create_dev()
net: dsa: sja1105: unregister the MDIO buses during teardown
Revert "tipc: Return the correct errno code"
net: mscc: Fix non-GPL export of regmap APIs
net: igmp: increase size of mr_ifc_count
MAINTAINERS: switch to my OMP email for Renesas Ethernet drivers
tcp_bbr: fix u32 wrap bug in round logic if bbr_init() called after 2B packets
net: pcs: xpcs: fix error handling on failed to allocate memory
net: linkwatch: fix failure to restore device state across suspend/resume
net: bridge: fix memleak in br_add_if()
net: switchdev: zero-initialize struct switchdev_notifier_fdb_info emitted by drivers towards the bridge
net: bridge: fix flags interpretation for extern learn fdb entries
net: dsa: sja1105: fix broken backpressure in .port_fdb_dump
net: dsa: lantiq: fix broken backpressure in .port_fdb_dump
net: dsa: lan9303: fix broken backpressure in .port_fdb_dump
net: dsa: hellcreek: fix broken backpressure in .port_fdb_dump
bpf, core: Fix kernel-doc notation
net: igmp: fix data-race in igmp_ifc_timer_expire()
net: Fix memory leak in ieee802154_raw_deliver
...
|
||
|
Linus Torvalds
|
f8fbb47c6e |
Merge branch 'for-v5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace
Pull ucounts fix from Eric Biederman: "This fixes the ucount sysctls on big endian architectures. The counts were expanded to be longs instead of ints, and the sysctl code was overlooked, so only the low 32bit were being processed. On litte endian just processing the low 32bits is fine, but on 64bit big endian processing just the low 32bits results in the high order bits instead of the low order bits being processed and nothing works proper. This change took a little bit to mature as we have the SYSCTL_ZERO, and SYSCTL_INT_MAX macros that are only usable for sysctls operating on ints, but unfortunately are not obviously broken. Which resulted in the versions of this change working on big endian and not on little endian, because the int SYSCTL_ZERO when extended 64bit wound up being 0x100000000. So we only allowed values greater than 0x100000000 and less than 0faff. Which unfortunately broken everything that tried to set the sysctls. (First reported with the windows subsystem for linux). I have tested this on x86_64 64bit after first reproducing the problems with the earlier version of this change, and then verifying the problems do not exist when we use appropriate long min and max values for extra1 and extra2" * 'for-v5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace: ucounts: add missing data type changes |
||
|
Linus Torvalds
|
fd66ad69ef |
seccomp fixes for v5.14-rc6
- Fix typo in user notification documentation (Rodrigo Campos) - Fix userspace counter report when using TSYNC (Hsuan-Chi Kuo, Wiktor Garbacz) -----BEGIN PGP SIGNATURE----- iQJKBAABCgA0FiEEpcP2jyKd1g9yPm4TiXL039xtwCYFAmEUHhAWHGtlZXNjb29r QGNocm9taXVtLm9yZwAKCRCJcvTf3G3AJvHdEACn+Ws1PhWQrypmFOG177DXC/jn Z/cBUxAE8F/y+lQ4wRkbN0GEQsrIFgDkTFPykzKfrgChud6cUhRe9gwmpKfpKNkZ ciD8jFfV/DP8tT1OtVMy2fPUWTQI/Lc5m9rvHYxYrRA1YbP6QF3RQouDzQw//VgB fLkdBs9izQKDreclPy5spumuy2Th07EIJyHHxw9pOW27QdtQgqHobkpXNXZWCGra 4Uo6lvK9XSnbY0PI95uu+5UgHMmqaZ0S+gDZL+mP105kMj10cbjocJkdUm0Trov6 06/J36gCFCVWlbDl6QOlJcUCUz2r5eeWTpW1qNrOTyd9CZzKVgNxDvx0jVP962Vg DfHxXzrg4EmhthQr3hphBwf0+was3g3s+bxkKn0mV3Vp9RJ6zzModt1+OsRB2zR3 FqKyGJbujHqYUhi1i9KayQxazWk7dEccvfDjY9F2eGmFBuUlM5jr4Gt4k2Wl93Df Yoco1f4AaEV3uU6zUf+Ta40FjLtQO66/ZhmmozGvrWLH8Y02se4ICgS+lXoGs4/k R2IMG6OPCpjmJc39+R5Lyh1jtbOXHf4Brxb2MMZkpoXQCMEND9uOleTaVlOLd4sP HGyu7dI36d6xH40vSIBRGV4ypE7jQUIQkIopjDqzbtFAyFvBXr3zEr/s3EVyc1E0 e+/PligHRRYBpl+l0w== =N5TG -----END PGP SIGNATURE----- Merge tag 'seccomp-v5.14-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux Pull seccomp fixes from Kees Cook: - Fix typo in user notification documentation (Rodrigo Campos) - Fix userspace counter report when using TSYNC (Hsuan-Chi Kuo, Wiktor Garbacz) * tag 'seccomp-v5.14-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: seccomp: Fix setting loaded filter count during TSYNC Documentation: seccomp: Fix typo in user notification |
||
Hsuan-Chi Kuo
|
b4d8a58f8d |
seccomp: Fix setting loaded filter count during TSYNC
The desired behavior is to set the caller's filter count to thread's.
This value is reported via /proc, so this fixes the inaccurate count
exposed to userspace; it is not used for reference counting, etc.
Signed-off-by: Hsuan-Chi Kuo <hsuanchikuo@gmail.com>
Link: https://lore.kernel.org/r/20210304233708.420597-1-hsuanchikuo@gmail.com
Co-developed-by: Wiktor Garbacz <wiktorg@google.com>
Signed-off-by: Wiktor Garbacz <wiktorg@google.com>
Link: https://lore.kernel.org/lkml/20210810125158.329849-1-wiktorg@google.com
Signed-off-by: Kees Cook <keescook@chromium.org>
Cc: stable@vger.kernel.org
Fixes:
|
||
|
Jakub Kicinski
|
d1a4e0a957 |
Merge https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Daniel Borkmann says: ==================== bpf-next 2021-08-10 We've added 31 non-merge commits during the last 8 day(s) which contain a total of 28 files changed, 3644 insertions(+), 519 deletions(-). 1) Native XDP support for bonding driver & related BPF selftests, from Jussi Maki. 2) Large batch of new BPF JIT tests for test_bpf.ko that came out as a result from 32-bit MIPS JIT development, from Johan Almbladh. 3) Rewrite of netcnt BPF selftest and merge into test_progs, from Stanislav Fomichev. 4) Fix XDP bpf_prog_test_run infra after net to net-next merge, from Andrii Nakryiko. 5) Follow-up fix in unix_bpf_update_proto() to enforce socket type, from Cong Wang. 6) Fix bpf-iter-tcp4 selftest to print the correct dest IP, from Jose Blanquicet. 7) Various misc BPF XDP sample improvements, from Niklas Söderlund, Matthew Cover, and Muhammad Falak R Wani. * https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (31 commits) bpf, tests: Add tail call test suite bpf, tests: Add tests for BPF_CMPXCHG bpf, tests: Add tests for atomic operations bpf, tests: Add test for 32-bit context pointer argument passing bpf, tests: Add branch conversion JIT test bpf, tests: Add word-order tests for load/store of double words bpf, tests: Add tests for ALU operations implemented with function calls bpf, tests: Add more ALU64 BPF_MUL tests bpf, tests: Add more BPF_LSH/RSH/ARSH tests for ALU64 bpf, tests: Add more ALU32 tests for BPF_LSH/RSH/ARSH bpf, tests: Add more tests of ALU32 and ALU64 bitwise operations bpf, tests: Fix typos in test case descriptions bpf, tests: Add BPF_MOV tests for zero and sign extension bpf, tests: Add BPF_JMP32 test cases samples, bpf: Add an explict comment to handle nested vlan tagging. selftests/bpf: Add tests for XDP bonding selftests/bpf: Fix xdp_tx.c prog section name net, core: Allow netdev_lower_get_next_private_rcu in bh context bpf, devmap: Exclude XDP broadcast to master device net, bonding: Add XDP support to the bonding driver ... ==================== Link: https://lore.kernel.org/r/20210810130038.16927-1-daniel@iogearbox.net Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
Randy Dunlap
|
019d0454c6 |
bpf, core: Fix kernel-doc notation
Fix kernel-doc warnings in kernel/bpf/core.c (found by scripts/kernel-doc and W=1 builds). That is, correct a function name in a comment and add return descriptions for 2 functions. Fixes these kernel-doc warnings: kernel/bpf/core.c:1372: warning: expecting prototype for __bpf_prog_run(). Prototype was for ___bpf_prog_run() instead kernel/bpf/core.c:1372: warning: No description found for return value of '___bpf_prog_run' kernel/bpf/core.c:1883: warning: No description found for return value of 'bpf_prog_select_runtime' Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20210809215229.7556-1-rdunlap@infradead.org |
||
|
Yonghong Song
|
a2baf4e8bb |
bpf: Fix potentially incorrect results with bpf_get_local_storage()
Commit |
||
|
Daniel Borkmann
|
51e1bb9eea |
bpf: Add lockdown check for probe_write_user helper
Back then, commit |
||
|
Linus Torvalds
|
9a73fa375d |
Merge branch 'for-5.14-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup
Pull cgroup fix from Tejun Heo: "One commit to fix a possible A-A deadlock around u64_stats_sync on 32bit machines caused by updating it without disabling IRQ when it may be read from IRQ context" * 'for-5.14-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup: cgroup: rstat: fix A-A deadlock on 32bit around u64_stats_sync |
||
Jussi Maki
|
aeea1b86f9 |
bpf, devmap: Exclude XDP broadcast to master device
If the ingress device is bond slave, do not broadcast back through it or the bond master. Signed-off-by: Jussi Maki <joamaki@gmail.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20210731055738.16820-5-joamaki@gmail.com |
||
Sven Schnelle
|
f153c22467 |
ucounts: add missing data type changes
commit |
||
|
Daniel Borkmann
|
71330842ff |
bpf: Add _kernel suffix to internal lockdown_bpf_read
Rename LOCKDOWN_BPF_READ into LOCKDOWN_BPF_READ_KERNEL so we have naming more consistent with a LOCKDOWN_BPF_WRITE_USER option that we are adding. Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Andrii Nakryiko <andrii@kernel.org> |
||
|
Linus Torvalds
|
cceb634774 |
A single timer fix:
- Prevent a memory ordering issue in the timer expiry code which makes it
possible to observe falsely that the callback has been executed already
while that's not the case, which violates the guarantee of del_timer_sync().
-----BEGIN PGP SIGNATURE-----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=JQWW
-----END PGP SIGNATURE-----
Merge tag 'timers-urgent-2021-08-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer fix from Thomas Gleixner:
"A single timer fix:
- Prevent a memory ordering issue in the timer expiry code which
makes it possible to observe falsely that the callback has been
executed already while that's not the case, which violates the
guarantee of del_timer_sync()"
* tag 'timers-urgent-2021-08-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
timers: Move clearing of base::timer_running under base:: Lock
|
||
|
Linus Torvalds
|
713f0f37e8 |
A single scheduler fix:
- Prevent a double enqueue caused by rt_effective_prio() being invoked
twice in __sched_setscheduler().
-----BEGIN PGP SIGNATURE-----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=EZjT
-----END PGP SIGNATURE-----
Merge tag 'sched-urgent-2021-08-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler fix from Thomas Gleixner:
"A single scheduler fix:
- Prevent a double enqueue caused by rt_effective_prio() being
invoked twice in __sched_setscheduler()"
* tag 'sched-urgent-2021-08-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/rt: Fix double enqueue caused by rt_effective_prio
|
||
|
Linus Torvalds
|
74eedeba45 |
A set of perf fixes:
- Correct the permission checks for perf event which send SIGTRAP to a
different process and clean up that code to be more readable.
- Prevent an out of bound MSR access in the x86 perf code which happened
due to an incomplete limiting to the actually available hardware
counters.
- Prevent access to the AMD64_EVENTSEL_HOSTONLY bit when running inside a
guest.
- Handle small core counter re-enabling correctly by issuing an ACK right
before reenabling it to prevent a stale PEBS record being kept around.
-----BEGIN PGP SIGNATURE-----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=hhv+
-----END PGP SIGNATURE-----
Merge tag 'perf-urgent-2021-08-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf fixes from Thomas Gleixner:
"A set of perf fixes:
- Correct the permission checks for perf event which send SIGTRAP to
a different process and clean up that code to be more readable.
- Prevent an out of bound MSR access in the x86 perf code which
happened due to an incomplete limiting to the actually available
hardware counters.
- Prevent access to the AMD64_EVENTSEL_HOSTONLY bit when running
inside a guest.
- Handle small core counter re-enabling correctly by issuing an ACK
right before reenabling it to prevent a stale PEBS record being
kept around"
* tag 'perf-urgent-2021-08-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/x86/intel: Apply mid ACK for small core
perf/x86/amd: Don't touch the AMD64_EVENTSEL_HOSTONLY bit inside the guest
perf/x86: Fix out of bound MSR access
perf: Refactor permissions check into perf_check_permission()
perf: Fix required permissions if sigtrap is requested
|
||
David S. Miller
|
84103209ba |
Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf
Daniel Borkmann says: ==================== pull-request: bpf 2021-08-07 The following pull-request contains BPF updates for your *net* tree. We've added 4 non-merge commits during the last 9 day(s) which contain a total of 4 files changed, 8 insertions(+), 7 deletions(-). The main changes are: 1) Fix integer overflow in htab's lookup + delete batch op, from Tatsuhiko Yasumatsu. 2) Fix invalid fd 0 close in libbpf if BTF parsing failed, from Daniel Xu. 3) Fix libbpf feature probe for BPF_PROG_TYPE_CGROUP_SOCKOPT, from Robin Gögge. 4) Fix minor libbpf doc warning regarding code-block language, from Randy Dunlap. ==================== Signed-off-by: David S. Miller <davem@davemloft.net> |
||
Tatsuhiko Yasumatsu
|
c4eb1f4032 |
bpf: Fix integer overflow involving bucket_size
In __htab_map_lookup_and_delete_batch(), hash buckets are iterated
over to count the number of elements in each bucket (bucket_size).
If bucket_size is large enough, the multiplication to calculate
kvmalloc() size could overflow, resulting in out-of-bounds write
as reported by KASAN:
[...]
[ 104.986052] BUG: KASAN: vmalloc-out-of-bounds in __htab_map_lookup_and_delete_batch+0x5ce/0xb60
[ 104.986489] Write of size 4194224 at addr ffffc9010503be70 by task crash/112
[ 104.986889]
[ 104.987193] CPU: 0 PID: 112 Comm: crash Not tainted 5.14.0-rc4 #13
[ 104.987552] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-1ubuntu1.1 04/01/2014
[ 104.988104] Call Trace:
[ 104.988410] dump_stack_lvl+0x34/0x44
[ 104.988706] print_address_description.constprop.0+0x21/0x140
[ 104.988991] ? __htab_map_lookup_and_delete_batch+0x5ce/0xb60
[ 104.989327] ? __htab_map_lookup_and_delete_batch+0x5ce/0xb60
[ 104.989622] kasan_report.cold+0x7f/0x11b
[ 104.989881] ? __htab_map_lookup_and_delete_batch+0x5ce/0xb60
[ 104.990239] kasan_check_range+0x17c/0x1e0
[ 104.990467] memcpy+0x39/0x60
[ 104.990670] __htab_map_lookup_and_delete_batch+0x5ce/0xb60
[ 104.990982] ? __wake_up_common+0x4d/0x230
[ 104.991256] ? htab_of_map_free+0x130/0x130
[ 104.991541] bpf_map_do_batch+0x1fb/0x220
[...]
In hashtable, if the elements' keys have the same jhash() value, the
elements will be put into the same bucket. By putting a lot of elements
into a single bucket, the value of bucket_size can be increased to
trigger the integer overflow.
Triggering the overflow is possible for both callers with CAP_SYS_ADMIN
and callers without CAP_SYS_ADMIN.
It will be trivial for a caller with CAP_SYS_ADMIN to intentionally
reach this overflow by enabling BPF_F_ZERO_SEED. As this flag will set
the random seed passed to jhash() to 0, it will be easy for the caller
to prepare keys which will be hashed into the same value, and thus put
all the elements into the same bucket.
If the caller does not have CAP_SYS_ADMIN, BPF_F_ZERO_SEED cannot be
used. However, it will be still technically possible to trigger the
overflow, by guessing the random seed value passed to jhash() (32bit)
and repeating the attempt to trigger the overflow. In this case,
the probability to trigger the overflow will be low and will take
a very long time.
Fix the integer overflow by calling kvmalloc_array() instead of
kvmalloc() to allocate memory.
Fixes:
|
||
|
Linus Torvalds
|
2c4b1ec683 |
Fix tracepoint race between static_call and callback data
As callbacks to a tracepoint are paired with the data that is passed in when the callback is registered to the tracepoint, it must have that data passed to the callback when the tracepoint is triggered, else bad things will happen. To keep the two together, they are both assigned to a tracepoint structure and added to an array. The tracepoint call site will dereference the structure (via RCU) and call the callback in that structure along with the data in that structure. This keeps the callback and data tightly coupled. Because of the overhead that retpolines have on tracepoint callbacks, if there's only one callback attached to a tracepoint (a common case), then it is called via a static call (code modified to do a direct call instead of an indirect call). But to implement this, the data had to be decoupled from the callback, as now the callback is implemented via a direct call from the static call and not an indirect call from the dereferenced structure. Note, the static call only calls a callback used when there's a single callback attached to the tracepoint. If more than one callback is attached to the same tracepoint, then the static call will call an iterator function that goes back to dereferencing the structure keeping the callback and its data tightly coupled again. Issues can arise when going from 0 callbacks to one, as the static call is assigned to the callback, and it must take care that the data passed to it is loaded before the static call calls the callback. Going from 1 to 2 callbacks is not an issue, as long as the static call is updated to the iterator before the tracepoint structure array is updated via RCU. Going from 2 to more or back down to 2 is not an issue as the iterator can handle all theses cases. But going from 2 to 1, care must be taken as the static call is now calling a callback and the data that is loaded must be the data for that callback. Care was taken to ensure the callback and data would be in-sync, but after a bug was reported, it became clear that not enough was done to make sure that was the case. These changes address this. The first change is to compare the old and new data instead of the old and new callback, as it's the data that can corrupt the callback, even if the callback is the same (something getting freed). The next change is to convert these transitions into states, to make it easier to know when a synchronization is needed, and to perform those synchronizations. The problem with this patch is that it slows down disabling all events from under a second, to making it take over 10 seconds to do the same work. But that is addressed in the final patch. The final patch uses the RCU state functions to keep track of the RCU state between the transitions, and only needs to perform the synchronization if an RCU synchronization hasn't been done already. This brings the performance of disabling all events back to its original value. That's because no synchronization is required between disabling tracepoints but is required when enabling a tracepoint after its been disabled. If an RCU synchronization happens after the tracepoint is disabled, and before it is re-enabled, there's no need to do the synchronization again. Both the second and third patch have subtle complexities that they are separated into two patches. But because the second patch causes such a regression in performance, the third patch adds a "Fixes" tag to the second patch, such that the two must be backported together and not just the second patch. -----BEGIN PGP SIGNATURE----- iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCYQ15TBQccm9zdGVkdEBn b29kbWlzLm9yZwAKCRAp5XQQmuv6qnmmAP4hoA34CDr5hrd8mYLeKptW63f5Nd1w fVZjprfa1wJhZAEAq39OeRCT4Fb2hIeZNBNUnLU90f+J6NH5QFDEhW+CkAI= =JcZS -----END PGP SIGNATURE----- Merge tag 'trace-v5.14-rc4-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace Pull tracing fixes from Steven Rostedt: "Fix tracepoint race between static_call and callback data As callbacks to a tracepoint are paired with the data that is passed in when the callback is registered to the tracepoint, it must have that data passed to the callback when the tracepoint is triggered, else bad things will happen. To keep the two together, they are both assigned to a tracepoint structure and added to an array. The tracepoint call site will dereference the structure (via RCU) and call the callback in that structure along with the data in that structure. This keeps the callback and data tightly coupled. Because of the overhead that retpolines have on tracepoint callbacks, if there's only one callback attached to a tracepoint (a common case), then it is called via a static call (code modified to do a direct call instead of an indirect call). But to implement this, the data had to be decoupled from the callback, as now the callback is implemented via a direct call from the static call and not an indirect call from the dereferenced structure. Note, the static call only calls a callback used when there's a single callback attached to the tracepoint. If more than one callback is attached to the same tracepoint, then the static call will call an iterator function that goes back to dereferencing the structure keeping the callback and its data tightly coupled again. Issues can arise when going from 0 callbacks to one, as the static call is assigned to the callback, and it must take care that the data passed to it is loaded before the static call calls the callback. Going from 1 to 2 callbacks is not an issue, as long as the static call is updated to the iterator before the tracepoint structure array is updated via RCU. Going from 2 to more or back down to 2 is not an issue as the iterator can handle all theses cases. But going from 2 to 1, care must be taken as the static call is now calling a callback and the data that is loaded must be the data for that callback. Care was taken to ensure the callback and data would be in-sync, but after a bug was reported, it became clear that not enough was done to make sure that was the case. These changes address this. The first change is to compare the old and new data instead of the old and new callback, as it's the data that can corrupt the callback, even if the callback is the same (something getting freed). The next change is to convert these transitions into states, to make it easier to know when a synchronization is needed, and to perform those synchronizations. The problem with this patch is that it slows down disabling all events from under a second, to making it take over 10 seconds to do the same work. But that is addressed in the final patch. The final patch uses the RCU state functions to keep track of the RCU state between the transitions, and only needs to perform the synchronization if an RCU synchronization hasn't been done already. This brings the performance of disabling all events back to its original value. That's because no synchronization is required between disabling tracepoints but is required when enabling a tracepoint after its been disabled. If an RCU synchronization happens after the tracepoint is disabled, and before it is re-enabled, there's no need to do the synchronization again. Both the second and third patch have subtle complexities that they are separated into two patches. But because the second patch causes such a regression in performance, the third patch adds a "Fixes" tag to the second patch, such that the two must be backported together and not just the second patch" * tag 'trace-v5.14-rc4-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: tracepoint: Use rcu get state and cond sync for static call updates tracepoint: Fix static call function vs data state mismatch tracepoint: static call: Compare data on transition from 2->1 callees |
||
Mathieu Desnoyers
|
7b40066c97 |
tracepoint: Use rcu get state and cond sync for static call updates
State transitions from 1->0->1 and N->2->1 callbacks require RCU synchronization. Rather than performing the RCU synchronization every time the state change occurs, which is quite slow when many tracepoints are registered in batch, instead keep a snapshot of the RCU state on the most recent transitions which belong to a chain, and conditionally wait for a grace period on the last transition of the chain if one g.p. has not elapsed since the last snapshot. This applies to both RCU and SRCU. This brings the performance regression caused by commit |
||
|
Jakub Kicinski
|
0ca8d3ca45 |
Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Build failure in drivers/net/wwan/mhi_wwan_mbim.c: add missing parameter (0, assuming we don't want buffer pre-alloc). Conflict in drivers/net/dsa/sja1105/sja1105_main.c between: |
||
|
Mathieu Desnoyers
|
231264d692 |
tracepoint: Fix static call function vs data state mismatch
On a 1->0->1 callbacks transition, there is an issue with the new
callback using the old callback's data.
Considering __DO_TRACE_CALL:
do { \
struct tracepoint_func *it_func_ptr; \
void *__data; \
it_func_ptr = \
rcu_dereference_raw((&__tracepoint_##name)->funcs); \
if (it_func_ptr) { \
__data = (it_func_ptr)->data; \
----> [ delayed here on one CPU (e.g. vcpu preempted by the host) ]
static_call(tp_func_##name)(__data, args); \
} \
} while (0)
It has loaded the tp->funcs of the old callback, so it will try to use the old
data. This can be fixed by adding a RCU sync anywhere in the 1->0->1
transition chain.
On a N->2->1 transition, we need an rcu-sync because you may have a
sequence of 3->2->1 (or 1->2->1) where the element 0 data is unchanged
between 2->1, but was changed from 3->2 (or from 1->2), which may be
observed by the static call. This can be fixed by adding an
unconditional RCU sync in transition 2->1.
Note, this fixes a correctness issue at the cost of adding a tremendous
performance regression to the disabling of tracepoints.
Before this commit:
# trace-cmd start -e all
# time trace-cmd start -p nop
real 0m0.778s
user 0m0.000s
sys 0m0.061s
After this commit:
# trace-cmd start -e all
# time trace-cmd start -p nop
real 0m10.593s
user 0m0.017s
sys 0m0.259s
A follow up fix will introduce a more lightweight scheme based on RCU
get_state and cond_sync, that will return the performance back to what it
was. As both this change and the lightweight versions are complex on their
own, for bisecting any issues that this may cause, they are kept as two
separate changes.
Link: https://lkml.kernel.org/r/20210805132717.23813-3-mathieu.desnoyers@efficios.com
Link: https://lore.kernel.org/io-uring/4ebea8f0-58c9-e571-fd30-0ce4f6f09c70@samba.org/
Cc: stable@vger.kernel.org
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: "Paul E. McKenney" <paulmck@kernel.org>
Cc: Stefan Metzmacher <metze@samba.org>
Fixes:
|
||
|
Mathieu Desnoyers
|
f7ec412125 |
tracepoint: static call: Compare data on transition from 2->1 callees
On transition from 2->1 callees, we should be comparing .data rather
than .func, because the same callback can be registered twice with
different data, and what we care about here is that the data of array
element 0 is unchanged to skip rcu sync.
Link: https://lkml.kernel.org/r/20210805132717.23813-2-mathieu.desnoyers@efficios.com
Link: https://lore.kernel.org/io-uring/4ebea8f0-58c9-e571-fd30-0ce4f6f09c70@samba.org/
Cc: stable@vger.kernel.org
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: "Paul E. McKenney" <paulmck@kernel.org>
Cc: Stefan Metzmacher <metze@samba.org>
Fixes:
|
||
|
Linus Torvalds
|
6209049ecf |
Merge branch 'for-v5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace
Pull ucounts fix from Eric Biederman: "Fix a subtle locking versus reference counting bug in the ucount changes, found by syzbot" * 'for-v5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace: ucounts: Fix race condition between alloc_ucounts and put_ucounts |
||
|
Linus Torvalds
|
3c3e902707 |
Various tracing fixes:
- Fix NULL pointer dereference caused by an error path
- Give histogram calculation fields a size, otherwise it breaks synthetic
creation based on them.
- Reject strings being used for number calculations.
- Fix recordmcount.pl warning on llvm building RISC-V allmodconfig
- Fix the draw_functrace.py script to handle the new trace output
- Fix warning of smp_processor_id() in preemptible code
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCYQwR+xQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qtHOAQD7gBn1cRK0T3Eolf5HRd14PLDVUZ1B
iMZuTJZzJUWLSAD/ec3ezcOafNlPKmG1ta8UxrWP5VzHOC5qTIAJYc1d5AA=
=7FNB
-----END PGP SIGNATURE-----
Merge tag 'trace-v5.14-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing fixes from Steven Rostedt:
"Various tracing fixes:
- Fix NULL pointer dereference caused by an error path
- Give histogram calculation fields a size, otherwise it breaks
synthetic creation based on them.
- Reject strings being used for number calculations.
- Fix recordmcount.pl warning on llvm building RISC-V allmodconfig
- Fix the draw_functrace.py script to handle the new trace output
- Fix warning of smp_processor_id() in preemptible code"
* tag 'trace-v5.14-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
tracing: Quiet smp_processor_id() use in preemptable warning in hwlat
scripts/tracing: fix the bug that can't parse raw_trace_func
scripts/recordmcount.pl: Remove check_objcopy() and $can_use_local
tracing: Reject string operand in the histogram expression
tracing / histogram: Give calculation hist_fields a size
tracing: Fix NULL pointer dereference in start_creating
|
||
Steven Rostedt (VMware)
|
51397dc6f2 |
tracing: Quiet smp_processor_id() use in preemptable warning in hwlat
The hardware latency detector (hwlat) has a mode that it runs one thread
across CPUs. The logic to move from the currently running CPU to the next
one in the list does a smp_processor_id() to find where it currently is.
Unfortunately, it's done with preemption enabled, and this triggers a
warning for using smp_processor_id() in a preempt enabled section.
As it is only using smp_processor_id() to get information on where it
currently is in order to simply move it to the next CPU, it doesn't really
care if it got moved in the mean time. It will simply balance out later if
such a case arises.
Switch smp_processor_id() to raw_smp_processor_id() to quiet that warning.
Link: https://lkml.kernel.org/r/20210804141848.79edadc0@oasis.local.home
Acked-by: Daniel Bristot de Oliveira <bristot@redhat.com>
Fixes:
|
||
Masami Hiramatsu
|
a9d10ca498 |
tracing: Reject string operand in the histogram expression
Since the string type can not be the target of the addition / subtraction
operation, it must be rejected. Without this fix, the string type silently
converted to digits.
Link: https://lkml.kernel.org/r/162742654278.290973.1523000673366456634.stgit@devnote2
Cc: stable@vger.kernel.org
Fixes:
|
||
|
Steven Rostedt (VMware)
|
2c05caa7ba |
tracing / histogram: Give calculation hist_fields a size
When working on my user space applications, I found a bug in the synthetic
event code where the automated synthetic event field was not matching the
event field calculation it was attached to. Looking deeper into it, it was
because the calculation hist_field was not given a size.
The synthetic event fields are matched to their hist_fields either by
having the field have an identical string type, or if that does not match,
then the size and signed values are used to match the fields.
The problem arose when I tried to match a calculation where the fields
were "unsigned int". My tool created a synthetic event of type "u32". But
it failed to match. The string was:
diff=field1-field2:onmatch(event).trace(synth,$diff)
Adding debugging into the kernel, I found that the size of "diff" was 0.
And since it was given "unsigned int" as a type, the histogram fallback
code used size and signed. The signed matched, but the size of u32 (4) did
not match zero, and the event failed to be created.
This can be worse if the field you want to match is not one of the
acceptable fields for a synthetic event. As event fields can have any type
that is supported in Linux, this can cause an issue. For example, if a
type is an enum. Then there's no way to use that with any calculations.
Have the calculation field simply take on the size of what it is
calculating.
Link: https://lkml.kernel.org/r/20210730171951.59c7743f@oasis.local.home
Cc: Tom Zanussi <zanussi@kernel.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: stable@vger.kernel.org
Fixes:
|
||
Peter Zijlstra
|
f558c2b834 |
sched/rt: Fix double enqueue caused by rt_effective_prio
Double enqueues in rt runqueues (list) have been reported while running
a simple test that spawns a number of threads doing a short sleep/run
pattern while being concurrently setscheduled between rt and fair class.
WARNING: CPU: 3 PID: 2825 at kernel/sched/rt.c:1294 enqueue_task_rt+0x355/0x360
CPU: 3 PID: 2825 Comm: setsched__13
RIP: 0010:enqueue_task_rt+0x355/0x360
Call Trace:
__sched_setscheduler+0x581/0x9d0
_sched_setscheduler+0x63/0xa0
do_sched_setscheduler+0xa0/0x150
__x64_sys_sched_setscheduler+0x1a/0x30
do_syscall_64+0x33/0x40
entry_SYSCALL_64_after_hwframe+0x44/0xae
list_add double add: new=ffff9867cb629b40, prev=ffff9867cb629b40,
next=ffff98679fc67ca0.
kernel BUG at lib/list_debug.c:31!
invalid opcode: 0000 [#1] PREEMPT_RT SMP PTI
CPU: 3 PID: 2825 Comm: setsched__13
RIP: 0010:__list_add_valid+0x41/0x50
Call Trace:
enqueue_task_rt+0x291/0x360
__sched_setscheduler+0x581/0x9d0
_sched_setscheduler+0x63/0xa0
do_sched_setscheduler+0xa0/0x150
__x64_sys_sched_setscheduler+0x1a/0x30
do_syscall_64+0x33/0x40
entry_SYSCALL_64_after_hwframe+0x44/0xae
__sched_setscheduler() uses rt_effective_prio() to handle proper queuing
of priority boosted tasks that are setscheduled while being boosted.
rt_effective_prio() is however called twice per each
__sched_setscheduler() call: first directly by __sched_setscheduler()
before dequeuing the task and then by __setscheduler() to actually do
the priority change. If the priority of the pi_top_task is concurrently
being changed however, it might happen that the two calls return
different results. If, for example, the first call returned the same rt
priority the task was running at and the second one a fair priority, the
task won't be removed by the rt list (on_list still set) and then
enqueued in the fair runqueue. When eventually setscheduled back to rt
it will be seen as enqueued already and the WARNING/BUG be issued.
Fix this by calling rt_effective_prio() only once and then reusing the
return value. While at it refactor code as well for clarity. Concurrent
priority inheritance handling is still safe and will eventually converge
to a new state by following the inheritance chain(s).
Fixes:
|
||
Johan Almbladh
|
b61a28cf11 |
bpf: Fix off-by-one in tail call count limiting
Before, the interpreter allowed up to MAX_TAIL_CALL_CNT + 1 tail calls. Now precisely MAX_TAIL_CALL_CNT is allowed, which is in line with the behavior of the x86 JITs. Signed-off-by: Johan Almbladh <johan.almbladh@anyfinetworks.com> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Acked-by: Yonghong Song <yhs@fb.com> Link: https://lore.kernel.org/bpf/20210728164741.350370-1-johan.almbladh@anyfinetworks.com |
||
|
Jakub Kicinski
|
d39e8b92c3 |
Merge https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Andrii Nakryiko says:
====================
bpf-next 2021-07-30
We've added 64 non-merge commits during the last 15 day(s) which contain
a total of 83 files changed, 5027 insertions(+), 1808 deletions(-).
The main changes are:
1) BTF-guided binary data dumping libbpf API, from Alan.
2) Internal factoring out of libbpf CO-RE relocation logic, from Alexei.
3) Ambient BPF run context and cgroup storage cleanup, from Andrii.
4) Few small API additions for libbpf 1.0 effort, from Evgeniy and Hengqi.
5) bpf_program__attach_kprobe_opts() fixes in libbpf, from Jiri.
6) bpf_{get,set}sockopt() support in BPF iterators, from Martin.
7) BPF map pinning improvements in libbpf, from Martynas.
8) Improved module BTF support in libbpf and bpftool, from Quentin.
9) Bpftool cleanups and documentation improvements, from Quentin.
10) Libbpf improvements for supporting CO-RE on old kernels, from Shuyi.
11) Increased maximum cgroup storage size, from Stanislav.
12) Small fixes and improvements to BPF tests and samples, from various folks.
* https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (64 commits)
tools: bpftool: Complete metrics list in "bpftool prog profile" doc
tools: bpftool: Document and add bash completion for -L, -B options
selftests/bpf: Update bpftool's consistency script for checking options
tools: bpftool: Update and synchronise option list in doc and help msg
tools: bpftool: Complete and synchronise attach or map types
selftests/bpf: Check consistency between bpftool source, doc, completion
tools: bpftool: Slightly ease bash completion updates
unix_bpf: Fix a potential deadlock in unix_dgram_bpf_recvmsg()
libbpf: Add btf__load_vmlinux_btf/btf__load_module_btf
tools: bpftool: Support dumping split BTF by id
libbpf: Add split BTF support for btf__load_from_kernel_by_id()
tools: Replace btf__get_from_id() with btf__load_from_kernel_by_id()
tools: Free BTF objects at various locations
libbpf: Rename btf__get_from_id() as btf__load_from_kernel_by_id()
libbpf: Rename btf__load() as btf__load_into_kernel()
libbpf: Return non-null error on failures in libbpf_find_prog_btf_id()
bpf: Emit better log message if bpf_iter ctx arg btf_id == 0
tools/resolve_btfids: Emit warnings and patch zero id for missing symbols
bpf: Increase supported cgroup storage value size
libbpf: Fix race when pinning maps in parallel
...
====================
Link: https://lore.kernel.org/r/20210730225606.1897330-1-andrii@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
||
|
Jakub Kicinski
|
d2e11fd2b7 |
Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Conflicting commits, all resolutions pretty trivial: drivers/bus/mhi/pci_generic.c |
||
|
Linus Torvalds
|
c7d1022326 |
Networking fixes for 5.14-rc4, including fixes from bpf, can, WiFi (mac80211)
and netfilter trees.
Current release - regressions:
- mac80211: fix starting aggregation sessions on mesh interfaces
Current release - new code bugs:
- sctp: send pmtu probe only if packet loss in Search Complete state
- bnxt_en: add missing periodic PHC overflow check
- devlink: fix phys_port_name of virtual port and merge error
- hns3: change the method of obtaining default ptp cycle
- can: mcba_usb_start(): add missing urb->transfer_dma initialization
Previous releases - regressions:
- set true network header for ECN decapsulation
- mlx5e: RX, avoid possible data corruption w/ relaxed ordering and LRO
- phy: re-add check for PHY_BRCM_DIS_TXCRXC_NOENRGY on the BCM54811 PHY
- sctp: fix return value check in __sctp_rcv_asconf_lookup
Previous releases - always broken:
- bpf:
- more spectre corner case fixes, introduce a BPF nospec
instruction for mitigating Spectre v4
- fix OOB read when printing XDP link fdinfo
- sockmap: fix cleanup related races
- mac80211: fix enabling 4-address mode on a sta vif after assoc
- can:
- raw: raw_setsockopt(): fix raw_rcv panic for sock UAF
- j1939: j1939_session_deactivate(): clarify lifetime of
session object, avoid UAF
- fix number of identical memory leaks in USB drivers
- tipc:
- do not blindly write skb_shinfo frags when doing decryption
- fix sleeping in tipc accept routine
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=sKPI
-----END PGP SIGNATURE-----
Merge tag 'net-5.14-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Networking fixes for 5.14-rc4, including fixes from bpf, can, WiFi
(mac80211) and netfilter trees.
Current release - regressions:
- mac80211: fix starting aggregation sessions on mesh interfaces
Current release - new code bugs:
- sctp: send pmtu probe only if packet loss in Search Complete state
- bnxt_en: add missing periodic PHC overflow check
- devlink: fix phys_port_name of virtual port and merge error
- hns3: change the method of obtaining default ptp cycle
- can: mcba_usb_start(): add missing urb->transfer_dma initialization
Previous releases - regressions:
- set true network header for ECN decapsulation
- mlx5e: RX, avoid possible data corruption w/ relaxed ordering and
LRO
- phy: re-add check for PHY_BRCM_DIS_TXCRXC_NOENRGY on the BCM54811
PHY
- sctp: fix return value check in __sctp_rcv_asconf_lookup
Previous releases - always broken:
- bpf:
- more spectre corner case fixes, introduce a BPF nospec
instruction for mitigating Spectre v4
- fix OOB read when printing XDP link fdinfo
- sockmap: fix cleanup related races
- mac80211: fix enabling 4-address mode on a sta vif after assoc
- can:
- raw: raw_setsockopt(): fix raw_rcv panic for sock UAF
- j1939: j1939_session_deactivate(): clarify lifetime of session
object, avoid UAF
- fix number of identical memory leaks in USB drivers
- tipc:
- do not blindly write skb_shinfo frags when doing decryption
- fix sleeping in tipc accept routine"
* tag 'net-5.14-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (91 commits)
gve: Update MAINTAINERS list
can: esd_usb2: fix memory leak
can: ems_usb: fix memory leak
can: usb_8dev: fix memory leak
can: mcba_usb_start(): add missing urb->transfer_dma initialization
can: hi311x: fix a signedness bug in hi3110_cmd()
MAINTAINERS: add Yasushi SHOJI as reviewer for the Microchip CAN BUS Analyzer Tool driver
bpf: Fix leakage due to insufficient speculative store bypass mitigation
bpf: Introduce BPF nospec instruction for mitigating Spectre v4
sis900: Fix missing pci_disable_device() in probe and remove
net: let flow have same hash in two directions
nfc: nfcsim: fix use after free during module unload
tulip: windbond-840: Fix missing pci_disable_device() in probe and remove
sctp: fix return value check in __sctp_rcv_asconf_lookup
nfc: s3fwrn5: fix undefined parameter values in dev_err()
net/mlx5: Fix mlx5_vport_tbl_attr chain from u16 to u32
net/mlx5e: Fix nullptr in mlx5e_hairpin_get_mdev()
net/mlx5: Unload device upon firmware fatal error
net/mlx5e: Fix page allocation failure for ptp-RQ over SF
net/mlx5e: Fix page allocation failure for trap-RQ over SF
...
|
||
Kamal Agrawal
|
ff41c28c4b |
tracing: Fix NULL pointer dereference in start_creating
The event_trace_add_tracer() can fail. In this case, it leads to a crash
in start_creating with below call stack. Handle the error scenario
properly in trace_array_create_dir.
Call trace:
down_write+0x7c/0x204
start_creating.25017+0x6c/0x194
tracefs_create_file+0xc4/0x2b4
init_tracer_tracefs+0x5c/0x940
trace_array_create_dir+0x58/0xb4
trace_array_create+0x1bc/0x2b8
trace_array_get_by_name+0xdc/0x18c
Link: https://lkml.kernel.org/r/1627651386-21315-1-git-send-email-kamaagra@codeaurora.org
Cc: stable@vger.kernel.org
Fixes:
|