IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
Instead of relying on legacy interfaces, convert the driver to
use GPIO descriptors. This is a straight-forward conversion,
we support also sdw devices providing GPIO descriptor tables
if they so desire.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20230911-descriptors-asoc-max-v2-3-b9d793fb768e@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The MAX9768 is pretty straight forward to convert to GPIO
descriptors.
To name the GPIO properties, I looke at the bindings in
maxim,max9759.yaml which names these GPIO "mute" and
"shutdown" respectively.
No board files using platform data exist in the kernel, new
users can use GPIO descriptor tables if desired.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20230911-descriptors-asoc-max-v2-1-b9d793fb768e@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Add bindings for the PWM-DAC controller on the JH7110
RISC-V SoC by StarFive Ltd.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Hal Feng <hal.feng@starfivetech.com>
Link: https://lore.kernel.org/r/20230814080618.10036-2-hal.feng@starfivetech.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The "AMP Enable Switch" is useful in systems with multiple
amplifiers connected to the same audio bus
but not all of them are needed for all use cases.
Signed-off-by: Vlad Karpovich <vkarpovi@opensource.cirrus.com>
Acked-by: Ricardo Rivera-Matos <rriveram@opensource.cirrus.com>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20230831162042.471801-4-vkarpovi@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Link VMON, IMON, TEMPMON, VDD_BSTMON and VDD_BATTMON
to DSP1. The CSPL firmware uses them for the speaker calibration
and monitoring.
Signed-off-by: Vlad Karpovich <vkarpovi@opensource.cirrus.com>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Acked-by: Ricardo Rivera-Matos <rriveram@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20230831162042.471801-3-vkarpovi@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Adds "Analog PCM Volume" control with supported values
0 = 10dB,1 = 13dB,2 = 16dB and 3 = 19dB.
The amplifier can operate either in Speaker Mode or Receiver Mode
as configured by the user. Speaker Mode has four gain options
to support maximum amplifier output amplitude for loud
speaker application. Receiver Mode has further optimized
noise performance while maintaining sufficient output to support
phone receiver application. While configured in Receiver Mode,
the analog PCM Volume control is disabled and
the analog gain is fixed to 1dB.
Signed-off-by: Vlad Karpovich <vkarpovi@opensource.cirrus.com>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20230831162042.471801-2-vkarpovi@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Checks the index computed by the virq offset before printing the
error condition in cs35l45_spk_safe_err() handler.
Signed-off-by: Ricardo Rivera-Matos <rriveram@opensource.cirrus.com>
Signed-off-by: Vlad Karpovich <vkarpovi@opensource.cirrus.com>
Acked-by: Ricardo Rivera-Matos <rriveram@opensource.cirrus.com>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20230831162042.471801-1-vkarpovi@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Simplify probe() by replacing of_match_device->i2c_get_match_data() and
extend matching support for ID table. Also replace
dev_err()->dev_err_probe() to simplify the code.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20230828174856.122559-1-biju.das.jz@bp.renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Simplify probe() by replacing of_match_device->i2c_get_match_data() and
extend matching support for ID table.
While at it, remove comma in the terminator entry and simplify probe()
by replacing dev_err->dev_err_probe().
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20230828174019.119250-1-biju.das.jz@bp.renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The TDM HW on the axg SoC families and derivatives actually supports
384kHz sampling rate.
Update the fifo and tdm interface constraints accordingly.
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Link: https://lore.kernel.org/r/20230907090910.13546-1-jbrunet@baylibre.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This commit enables sound for a line of Huawei laptops that use
the ES8336 codec which is connected to the ACP3X module.
Signed-off-by: Marian Postevca <posteuca@mutex.one>
Link: https://lore.kernel.org/r/20230829220116.1159-6-posteuca@mutex.one
Signed-off-by: Mark Brown <broonie@kernel.org>
This commit adds support for splitting more complicated machine
drivers, that need special handling, from the generic ACP code.
By adding support for callbacks to configure and handle codec
specific implementation details, we can split them in separate
files that don't clutter the ACP code.
Signed-off-by: Marian Postevca <posteuca@mutex.one>
Link: https://lore.kernel.org/r/20230829220116.1159-5-posteuca@mutex.one
Signed-off-by: Mark Brown <broonie@kernel.org>
To properly support a line of Huawei laptops with an AMD CPU
and an ES8336 codec connected to the ACP3X module, we need
to enable the codec option to divide the MCLK by 2.
This is needed because for at least one SKU that has a 48Mhz
MCLK the sound is distorted unless the MCLK div by 2 option
is enabled.
The option to divide the MCLK will first be tried. If no suitable
clocking can be generated from this frequency, then the normal
non-halved MCLK frequency will be tried.
Signed-off-by: Marian Postevca <posteuca@mutex.one>
Link: https://lore.kernel.org/r/20230829220116.1159-4-posteuca@mutex.one
Signed-off-by: Mark Brown <broonie@kernel.org>
No need for a special define since we can use ARRAY_SIZE() directly,
and won't need to worry to keep it in sync.
Signed-off-by: Marian Postevca <posteuca@mutex.one>
Link: https://lore.kernel.org/r/20230829220116.1159-3-posteuca@mutex.one
Signed-off-by: Mark Brown <broonie@kernel.org>
This CODEC does support the S32 LE format in es8316_pcm_hw_params(),
but doesn't have it enabled in ES8316_FORMATS. Enable it so that we
have more options to match with components.
Signed-off-by: Marian Postevca <posteuca@mutex.one>
Link: https://lore.kernel.org/r/20230829220116.1159-2-posteuca@mutex.one
Signed-off-by: Mark Brown <broonie@kernel.org>
SM6115 has a TX macro, which surprisingly doesn't host a SWR master.
Conditionally skip the SWR reset sequence on this platform.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230825-topic-6115tx-v1-2-ebed201ad54b@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
SM6115 has a TX Macro, requiring an NPL clock, but not DCODEC.
Document it.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230825-topic-6115tx-v1-1-ebed201ad54b@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Simpilfy probe() by replacing of_device_get_match_data() and id lookup for
retrieving match data by i2c_get_match_data().
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://lore.kernel.org/r/20230831204734.104954-3-biju.das.jz@bp.renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Some minor cleanups:
Replace local variable np with dev_fwnode()
Replace dev_err()->dev_err_probe().
Remove comma in the terminator entry for OF table.
Drop a space in the terminator entry for ID table.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://lore.kernel.org/r/20230831204734.104954-2-biju.das.jz@bp.renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Commit ac950278b087 ("ASoC: add N cpus to M codecs dai link support")
added an additional local params in __soc_pcm_hw_params, for the CPU
side of the DAI. The snd_pcm_hw_params struct is pretty large (604
bytes) and keeping two local copies of it can make the stack frame
really large.
It is worth noting the variables are in separate code blocks so for
some optimisation levels in the compiler these will get automatically
combined keeping the stack frame reasonable. But better to manually
combine them to cover all cases.
Add a single local variable for __soc_pcm_hw_params and use in both
loops to shrink the stack frame.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20230908085920.2906359-1-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Commit 422f10adc3eb ("ASoC: wm8960: Add support for the power supplies")
added regulator support to the wm8960 driver, but neglected to update
error handling in the probe function. This results in warning backtraces
if the probe function fails.
Fixes: 422f10adc3eb ("ASoC: wm8960: Add support for the power supplies")
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Fabio Estevam <festevam@denx.de>
Link: https://lore.kernel.org/r/20230909120237.2646275-1-linux@roeck-us.net
Signed-off-by: Mark Brown <broonie@kernel.org>
for_each_child_of_node performs an of_node_get on each
iteration, so a break out of the loop requires an
of_node_put.
This was done using the Coccinelle semantic patch
iterators/for_each_child.cocci
Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr>
Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/20230907095521.14053-11-Julia.Lawall@inria.fr
Signed-off-by: Mark Brown <broonie@kernel.org>
For spdif input to report the locked rate correctly, even when no capture
is running, the HW and reference clock must be started as soon as
the dai is probed.
Fixes: 5ce5658375e6 ("ASoC: meson: add axg spdif input")
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Link: https://lore.kernel.org/r/20230907090504.12700-1-jbrunet@baylibre.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Driver remove() must call pm_runtime_dont_use_autosuspend().
Drivers that call pm_runtime_use_autosuspend() must disable
it in driver remove(). Unfortunately until recently this was
only mentioned in 1 line in a 900+ line document so most
people hadn't noticed this. It has only recently been added
to the kerneldoc of pm_runtime_use_autosuspend().
THIS WON'T APPLY CLEANLY TO V6.5 AND EARLIER:
We will send a separate backported patch to stable.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20230908101716.2658582-1-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Tegra audio graph card has many DAI links which connects internal
AHUB modules and external audio codecs. Since these are DPCM links,
hw_params() call in the machine driver happens for each connected
BE link and PLLA is updated every time. This is not really needed
for all links as only I/O link DAIs derive respective clocks from
PLLA_OUT0 and thus from PLLA. Hence add checks to limit the clock
updates to DAIs over I/O links.
This found to be fixing a DMIC clock discrepancy which is suspected
to happen because of back to back quick PLLA and PLLA_OUT0 rate
updates. This was observed on Jetson TX2 platform where DMIC clock
ended up with unexpected value.
Fixes: 202e2f774543 ("ASoC: tegra: Add audio graph based card driver")
Cc: stable@vger.kernel.org
Signed-off-by: Sameer Pujar <spujar@nvidia.com>
Link: https://lore.kernel.org/r/1694098945-32760-3-git-send-email-spujar@nvidia.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Remove trailing comma in the terminator entry for OF table.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20230901065952.18760-3-biju.das.jz@bp.renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Simplify probe() by replacing of_match_device->i2c_get_match_data()
and extend matching support for ID table.
While at it, remove comma in the terminator entry and simplify probe()
by replacing dev_err()->dev_err_probe().
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20230901065952.18760-2-biju.das.jz@bp.renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This driver is already using solely GPIO descriptors and
do not need to include the legacy headers <linux/gpio.h>
or <linux/of_gpio.h>. Drop them.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20230825-descriptors-asoc-max-v1-7-b212292b2f08@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
This driver is already using solely GPIO descriptors and
do not need to include the legacy headers <linux/gpio.h>
or <linux/of_gpio.h>. Drop them.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20230825-descriptors-asoc-max-v1-6-b212292b2f08@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Instead of relying on legacy interfaces, convert the driver to
use GPIO descriptors. This is a straight-forward conversion,
we support also sdw devices providing GPIO descriptor tables
if they so desire.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20230825-descriptors-asoc-max-v1-3-b212292b2f08@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The MAX9768 is pretty straight forward to convert to GPIO
descriptors.
To name the GPIO properties, I looke at the bindings in
maxim,max9759.yaml which names these GPIO "mute" and
"shutdown" respectively.
No board files using platform data exist in the kernel, new
users can use GPIO descriptor tables if desired.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20230825-descriptors-asoc-max-v1-1-b212292b2f08@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Simplify probe() by replacing of_match_node() and i2c_match_id() with
i2c_get_match_data().
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20230831194622.87653-3-biju.das.jz@bp.renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add enum aic32x4_type to aic32x4_probe() and drop using dev_set_drvdata()
from tlv320aic32x4_{i2c,spi} drivers.
Suggested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20230831194622.87653-2-biju.das.jz@bp.renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
SOF is enabled when adsp phandle is assigned to "mediatek,adsp".
The required callback will be assigned when SOF is enabled.
Additionally, "mediatek,dai-link" is introduced to decide the supported
dai links for a project, so user can reuse the machine driver regardless
of dai link combination.
Signed-off-by: Trevor Wu <trevor.wu@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20230825024935.10878-4-trevor.wu@mediatek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Originally, normal dai link fixup callback is overwritten by sof fixup
callback on mtk_sof_card_late_probe and it relies on the mapping defined
on struct sof_conn_stream.
It's not flexible. When a new hardware connection is adopted, user needs
to update struct sof_conn_stream defined in machine driver which is used
to specify the mapping relationship of normal BE and SOF BE.
In the patch, mtk_sof_check_tplg_be_dai_link_fixup() is introduced for
all normal BEs. In mtk_sof_late_probe, back up normal BE fixup if it
exists and then overwrite be_hw_params_fixup by the new callback.
There are two cases for FE and BE connection.
case 1:
SOF FE -> normal BE
-> SOF_BE
case 2:
normal FE -> normal BE
In the new fixup callback, it tries to find SOF_BE which connects to the
same FE, and then reuses the fixup of SOF_BE. If no SOF_BE exists,
it must be case 2, so rollback to the original fixup if it exists.
As a result, the predefined relation is not needed anymore. Hardware
connection can be controlled by the mixer control for AFE interconn.
Then, DPCM finds the BE mapping at runtime.
Signed-off-by: Trevor Wu <trevor.wu@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20230825024935.10878-3-trevor.wu@mediatek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
To avoid power leakage, it is recommended to replace the default pinctrl
state with dynamic pinctrl since certain audio pinmux functions can
remain in a HIGH state even when audio is disabled. Linking pinctrl with
DAPM using SND_SOC_DAPM_PINCTRL will ensure that audio pins remain in
GPIO mode by default and only switch to an audio function when necessary.
Signed-off-by: Trevor Wu <trevor.wu@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20230825024935.10878-2-trevor.wu@mediatek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
